Turn
ing Your Assets into Dollars
Online AuctionSURPLUS
EQUIPMENTEVERYTHING
MUST SELL!
Asset Sales, Inc.Corporate Headquarters
301 Post Office Drive, Suite CIndian Trail, NC 28079
Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]
European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH
Tel / Fax [email protected]
Asset Sales (Canada) Inc.4310 Prospect Road
Bayside, Nova Scotia, Canada B3Z 1L5Tel 902.852.5331 Fax 704.821.4325
EQUIPMENT SURPLUS TO MAJOR MANUFACTURERSPRESS BRAKE & FABRICATING, CHIP PREOCESSING, CNC LATHES &
2006 TBT GUN DRILL & MILL MACHINERYBIDDING CLOSES THURSDAY, NOVEMBER 12TH @ 1:00 P.M. EST
Inspection: By Appointment Only** Please Note Equipment Location in Descriptions **
TBT 6-AXIS CNC DEEP HOLE DRILLING & MILLING CENTER
OCEAN AVENGER CNC BEAM DRILL LINE
(2) MIGHTY VIPER CNC TURNING CENTERS
GUIFIL 122 TON CNC HYDRAULIC PRESS BRAKE
2005 2011
2006 2002
MACHINERY INSPECTION DATE & TIME – CALL FOR APPOINTMENT (888) 800-4442
2
TBT 6-AXIS CNC DEEP HOLE DRILLING AND MILLING CENTER
(2) MIGHTY VIPER VT-25BL CNC TURNING CENTERS
2011
CNC DRILLING & MILLING CENTER
TBT Model BWW300 6-Axis CNC Deep Hole Drilling and Milling Center with 2.36” Max. Diameter Gundrilling Capacity, 78.74” Max. Drilling Depth, 4.64” Max. Diameter Counterboring, 3.14” Max. Diameter Drilling, 2.75” Max. Diameter Drilling-Indexable, 1-8000 RPM Spindle Speeds, Aux. Spindle Speeds 1-4000 RPM, 86.61” x 78.74” B-Axis Rotary Contouring Table, 118.11” X-Axis Horizontal Column Travel, 59.05” Y-Axis Vertical Head Travel, 102.36” W-Axis Contacting Travel, 39.37” Z-Axis Drill Cross Slide Travel, +25/-10 Degrees A-Axis Drill Angle, 30-Position Automatic Tool Changer, Siemens 840D CNC Pendant Controls, Rotary Indexer with 15” 3-Jaw Chuck, Renishaw Probe, Drill Bush Carrier, Gun Drilling Unit, High Pressure Coolant Pump, (2) Chip Conveyors, Centrifugal Chip Separator, Programmable Hydraulic Steady Rest, Large Quantity of TBT Gun Drill Tooling and Spare Parts, mfg. 2005 * Machine Location: Houston, TX
CNC TURNING CENTERS(2) MIGHTY VIPER Model VT-25BL CNC Turning Centers with 20.4” x 48” Capacity Between Centers, 41” Max. Turning Length, 3” Spindle Thru Hole, Spindle Speeds to 4000 RPM, 10” Power Chuck, 12 Station Turrets, Tool Presetter, Chip Conveyor, FANUC Series Oi-TD CNC Control, sn:9331106011 & 9330909011, mfg.2011 * Machine Location: Indian Trail, NC
2005
ONLINE AUCTION SALE DATE & TIME – BIDDING CLOSES THURSDAY, NOVEMBER 12TH @ 1:00 P.M. EST
3
CRITERION (3) STATION HYDRAULIC TUBE FABRICATION WORK CELL
55 TON AMADA 5020 CNC UP-ACTING HYDRAULIC PRESS BRAKE
CNC PRESS BRAKES55 Ton AMADA 5020 CNC Up-Acting Hydraulic Press Brake Model ITS25020 with 79” Overall Bending Length, 66.5” Distance Between Housing, 10 ga x 6’ Bending Capacity, 15.75” Throat Depth, Operateur 2-Axis CNC Control, Electric Foot Switch Controls, (8) Upper Tool Clamps, Sick Light Beam Safety Curtains, sn:ITS25020B50712, mfg.1995 * Machine Location: Lester, PA
122 Ton GUIFIL CNC Hydraulic Press Brake Model CCS 30-110 with 10’ 1” Overall Length of Bed, 8’ 4” Distance Between Housings, 5.9” Stroke Length (Adjustable), 9.8” Throat Depth, Delem DA-65 CNC Control, 4-Axis Back Gauge, Tool Holders for European Style Tooling, Sick Light Curtains, Electric Foot Switch, sn:456-00655, mfg.2002 * Machine Location: Lester, PA
HYDRAULIC CORNER & EDGE NOTCHERAMADA Model CSHW-220 27 Ton Heavy Duty Hydraulic Corner & Edge Notcher with .236” Maximum Sheet Thickness, 8.66 x 8.66” Corner Notching Capacity, 1.97” x 3.94” Edge Notching Capacity, Adjustable Work Holders for Corner & Edge Notching, T-Slotted Work Table, Electric Foot Switch Control, Digital Readouts for Positioning Gauge, sn:22000631, mfg.1986 * Machine Location: Lester, PA
BENDING ROLLCRAIG AND DONALD Model 4 (Scottish Machine Tool) Section Bending Roll with 6” x 6” x 1/2” Angle Bending Capacity (Leg Out), 4” x 4” x 3/4” Angle Bending Capacity (Leg In), 5” x 12” Maximum I-Beam Capacity (To 84” Dia.), 10” x 1-1/4” Maximum Flat on Flat Cap. (To 42” Dia.), Hydraulic Drive to Rolls, Power Adjustable Top Roll without Board Support, Manual Adjustable Guide Rolls, Push Button Controls, Standard Set of Bending Rolls, sn:8/50 * Machine Location: Lester, PA
TUBE BENDING WORK CELL (used for Mfg. Tractor Roll Cage)
CRITERION (3) Station Hydraulic Tube Fabrication Work Cell with Compression Bend Station: Tooling for 2" x 3" and 2" x 4" x 3/16" Wall Tube, 5” Bend Radius, Drilling Station: (2) Drill Heads, Part Clamping System, Coolant System, Piercing Station: (5) Station Mandrel Type Press, PLC Control System; Self Contained Hydraulic Power Supply; Tooling for 2" x 3" x 3/16" and 2" x 4" x 3/16" Tube; Complete Set of Drawings for Entire Cell * This cell is designed to bend, pierce and drill square tube used for roll cages in the agricultural, construction and recreational vehicle industries. sn:891, mfg.7/2004 * Machine Location: Lester, PA
122 TON GUIFIL CNC HYDRAULIC PRESS BRAKE
AMADA HEAVY DUTY HYDRAULIC CORNER & EDGE NOTCHER
CRAIG AND DONALD BENDING ROLL
2004
2002
MACHINERY INSPECTION DATE & TIME – CALL FOR APPOINTMENT (888) 800-4442
4
HYDRAULIC ANGLE SHEARFRANKLIN 90 Ton Hydraulic Angle Shear Model 1506SHR with 6” x 6” x 5/8” Shear Capacity, 10 HP Motor, Infeed and Outfeed Conveyors, sn:960F1436 * Machine Location: Indian Trail, NC
GRINDERCINCINNATI 12” x 36” Universal Cylindrical Grinder with 12” Max. Swing Over Bed, 36” Distance Between Centers, Variable Speed Workhead with Tail Stock, Universal Grinding Head, Swing Down Internal Grind Motor (no spindle), Coolant System, Assorted Centers, sn:2U3DIL-95 * Machine Location: Indian Trail, NC
FRANKLIN 90 TON HYDRAULIC ANGLE SHEAR
OCEAN AVENGER CNC BEAM DRILL LINE SINGLE SPINDLE
CINCINNATI 12" X 36" UNIVERSAL CYLINDRICAL GRINDER
CNC BEAM DRILL LINE
OCEAN AVENGER CNC Beam Drill Line Single Spindle with Optional 60’ Profile Size, 2” Max. Drill Diameter, 1-1/4” Material Thickness, 120 ft. per min. Max. X & Y-Axis Speed, 200-850 RPM Variable Spindle Speeds, 13” Max. Spindle Stroke, Rush 2504 Drill Grinder Included, Siemens 2-Axis 840D CNC Control, sn:49099, mfg.2006 * Machine Location: Indian Trail, NC
2006
ONLINE AUCTION SALE DATE & TIME – BIDDING CLOSES THURSDAY, NOVEMBER 12TH @ 1:00 P.M. EST
5
PRAB CHIP & OIL PROCESSING SYSTEM
HYDRAULIC TUBE BENDERPINES Model 3/4 Hydraulic Tube Bender with 3/4” Capacity, Hydraulic Mandrel Extractor, Push Button Control, sn:11000-73569 * Machine Location: Indian Trail, NC
WELDERPECK SPUD & BOSS Welder Horn Model P3W3H with 10” Dia. – 30” Dia. Capacity, 30” x 36” Adjustable Table, 24” Throat Depth with Cylinder Stroke, 6” Vertical Head Travel, Variable Welding Speed, Remote Operator Control Stand, Wire Feed, Miller CP-5VS Weld Power Source, sn:71171 * Machine Location: Indian Trail, NC
CHIP & OIL PROCESSING SYSTEMPRAB Chip & Oil Processing System Model Design 59968 with 12” Screw Conveyor, 2 Oil Pump Tanks, 1,500 lbs. per hour Capacity, 37 Total HP, 200 Gallon Drag Tank, 2 Roll Chip Shredder, 24 AD Ringer, 1,700 Gallon Oil Tank, Various Conveyors, Model R Part Separator, Chip Blowers, Cyclone, Cart Dumper, Drag Out Conveyor, sn:9968EA * Machine Location: Indian Trail, NC
GEAR TESTERHOFLER Model HFR-2000 Gear Tester with 74.8” Max. Base Circle Diameter, 7.87” Min. Base Circle Diameter, 78.7” Max. Test Piece Diameter, .79 Max. DP, 25.4 Min. DP, 60° Max. Helix Angle, 15.7” Max Face Width, 23.6” Max. Vertical Adjustment (B), 74.8” Max. Distance Between Centers (E), 8.27” Min. Distance Between Centers (E), 82.7” Max. Height Over Center (G), 22,000 lbs Max. Table Load, 25.6” Max. Table Diameter, Involute Testing, Index Testing, Lead Testing, External Gears, Tailstock, Heidenhien Scale, Pitranik PC4K01 Control, sn:024005, mfg.1981 * Machine Location: Indian Trail, NC
PINES HYDRAULIC TUBE BENDER
PRAB CHIP & OIL PROCESSING SYSTEMPECK SPUD & BOSS WELDER HORN
ONLINE AUCTION SALE DATE & TIME – BIDDING CLOSES THURSDAY, NOVEMBER 12TH @ 1:00 P.M. EST
6
VIBRATORY FINISHINGSWECO Model FM20 20 Cubic Foot Vibrator Finishing Machine with Timer & Controls, Foot Switch, Doser Control, sn:665902-A997 mfg.1997, Machine Located: Summerville, SC
TURNING CENTERMORI SEIKI Model CL20 CNC Turning Center with 8” Kitagawa Power Chuck, Tail Stock, Turret, Chip Conveyor, Fanuc Control, sn:643, mfg.1994, Machine Located: Summerville, SC
CNC PRESS BRAKELVD Model 180-JS-13 180 Ton x 13' Bed 3-Axis CNC Hydraulic Press Brake with Hurco AB7S7 Back Gauge, sn:22667, mfg.1996, Machine Located: Indian Trail, NC
PUNCH PRESSAMADA Pega 344 Q Model 304040 Turret Punch Press with 40" x 40" Table, 56 Stations, 3M Fanuc Control, Transfer Ball Table, sn:AH440225, mfg.1984, Machine Located Waynesboro, VA
MORI SEIKI CL20 CNC TURNING CENTER SWECO VIBRATOR FINISHING MACHINE
LVD 180 TON CNC HYDRAULIC PRESS BRAKE AMADA PEGA 344 Q TURRET PUNCH PRESS
Want to Join Our Mailing List? Want to be Included in Email Blast announcing Upcoming Future Auctions? Want to Update Your Address? Curious to Preview Machines and Tooling Featured in an Upcoming Auction? Want to Request a Brochure? Email Us at [email protected] or Fax a Request to (704) 821-4325!
Turn
ing Your Assets into Dollars
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C
Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315
Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • North Carolina License #6625
Lance Mannion • North Carolina License #6003
UPCOMING AUCTIONSTHURSDAY, NOVEMBER 5th - Pitney BowesLate Model CNC Machining, Fabriacting & ToolingOnsite / OnlineClearwater, FL
ONLINE AUCTIONEQUIPMENT SURPLUS TO MAJOR MANUFACTURERS
Press Brakes & Fabricating, Chip Processing, CNC Lathes & 2006 TBT Gun Drill & Mill Machinery
BIDDING CLOSES THURSDAY, NOVEMBER 12TH
@ 1:00 P.M. EST
ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.
Subject to amendments and modifications announced by Asset Sales, Inc. and Bidspotter at the time of the auction, any person participating in the webcast auction will be bound by the following terms and conditions. Neither Asset Sales, Inc. nor Bidspotter warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.
All articles will be sold to the highest webcast bidder conforming to the bid process in accordance to the AUCTION COMPANY’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be removed in the time allocated by Asset Sales, Inc.. No item, no matter how small or how far the purchaser has to travel, may be removed until after the online auction is completely closed.
All payments shall be by wire transfer. All bidding and invoicing will be in US Dollars ($).
All bidders are responsible for all applicable taxes, in addition a 18% Buyer’s Premium is implemented for all online sales.Rigging/ Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.
ALL ONLINE SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS.
REGISTRATION & BIDDING ONLINE:When participating as a buyer via Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agree-ment to the Terms and Conditions.
ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED.
THURSDAY, DECEMBER 3th - Plano MachineLate Model & High End Mazak CNC Turning, Horz. & Vert. Machining, Boring & Manual MachinesOnsite / Online
175 TON CONTROLLED AUTOMATION CNC PLATE PUNCH GEKA CNC PLATE DUPLICATOR / PUNCH
CNC PUNCHESGEKA Model Paxy 2000 (Puma 220/PD) CNC Plate Duplicator / Punch with 30” x 80” Capacity, 1-9/16” Max. Thickness, 36” Throat Depth, 1-1/8” x 1-1/8” Square Punching Capacity, 1-1/2” Round Punching Capacity, Large Assortment Punches & Dies, Approximate-ly 44" x 12' Ball Work Table, X & Y Axis Guide Rail & Clamps, Fagor Paxy 2000 CNC Con-trols, Remote Foot Actuator, sn:312, mfg.1995 * Machine Location: Indian Trail, NC
175 Ton CONTROLLED AUTOMATION Model 2AT-175 CNC Plate Punch with 30” x 60” Max. Plate Size, 30” Throat Depth, 1-1/2” Max. Material Thickness, 2-5/16” Max. Hole Size, 2-1/2” x 2-1/2” x 1/8” - 8” x 8” x 1-1/8” Angle Capacity, 2” Punch Stroke, sn:97-71, mfg.1996 * Machine Location: Philadelphia, PA