12
��ea� ����i��, ��ea� �u��i�� Stainless Steel Handrail System Lockinex ®
��ea� ����i��, ��ea� �u��i��
Stainless Steel Handrail System
Lockinex®
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Lockinex
INTRODUCTION
Lockinex Stainless steel balustrades & handrails are found in many public areas.The simplicity of the component systemenables easy order proceeding and deliveryassisting in a speedy economical installation.The high quality brackets and tube providefor a high class look and feel.
APPLICATION
Installations such as, Mezzaninefloor areas in showrooms, Pool side,Internal stair cases, Exhibition Hall,Domestic dwellings, Roof top gardensand much more.
COMPOSITION, MANUFACTURE
Grade 304 Stainless steel is used through out.
A satin finish is applied to all items.
Items are manufactured to an industryleading standard and are guaranteed.
DESIGN
Clever design and application ensurethe product meets with current UK building regulations.
Page 2
of 12
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
12
110
25
95
To suit 42.4mm dia. tube.
90 90
58
62
6
42
Inox-503-42.4-SF (To suit 42.4mm x 2mm tube)
Adjustable handrail support bracket. Fixed from behind the supporting structure.1 x M8 x 15mm bolt is supplied for this purpose. The maximum material thicknessusing this standard bolt is 8mm. (The user must supply longer bolts if required)
62
42
625
80 80
13
42.438
To suit 42.4mm dia. tube.
Applyadhesive
Inox-506-42.4-SF (To suit 42.4mm x 2mm tube)
Tube mounted handrail support bracket with adjustable saddle.Use adhesive to �x to the supporting tube.
Page 3
of 12
80
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
42.438
15
42
25
62
12
69
To suit 42.4mm dia. tube.
6
5mm counter sunk holes
12
79
82
8 58
Inox-509-42.4-SF (To suit 42.4mm x 2mm tube)
Wall mounted handrail support bracket.Ready for welding to handrail tube.
Tube mounted handrail support bracket with saddle.Use adhesive to �x to the supporting tube.
Applyadhesive
Inox-512-42.4-SF (To suit 42.4mm x 2mm tube)
Page 4
of 12
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
39
42.4
42.4mmDia. 42 62
25
25
14
100
87
To suit 42.4mm dia. tube.
An M8 threaded hole must becreated in the wall of the tube in order to accept the M8 bolt to make a �xing point.
M8 Grade 304 stainless steel �xing bolt.
Once the M8 threaded holehas been created in the wall of the tubeand the M8 bolt has �xed the cap to thetube, slide the main section overthe end of the cap and secure by tightening the grub screw. In some casesit is recommended that adhesive be used as well as the grub screw. Use Loctite AA 326 Adhesive along with Loctite 7649 activator. Also consider using Loctite SF 7200 Cleaner in order to remove visible excess adhesive after bonding.
Saddle height can be adjustedby loosening grub screw andlowering or raising the supportstem. Adjustment range is 85mm.Minimum recommended project for bottom of stem is 10mm.
6
Inox-515-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-518-42.4-SF (To suit 42.4mm x 2mm tube)
Handrail support bracket with adjustable support.Drill supporting tube and thread hole to accept M8 bolt (Supplied)
Tube plug. Use soft hammer to �x into end of tube, apply adhesive if necessary.
Page 5
of 12
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
Recommended drillingdistance from edge ofglass is 28mm (Approx).Recommended drill size isapprox. 9.5mm Dia.
6mm Diameterpin with 8mm diameter plasticsleeve.
42.4mmDia.
9mm clearance hole
An M8 threaded hole mustbe created in the wall of the tube in order to accept a M8 bolt, creating a �xing point.
2968
45
Inox-521-42.4-SF-For connections to suit 42.4mm dia. tube
Glass clamp with rubber gaskets and retaining safety pin.The body of the clamp is mechanically �xed to the supporting structure.Suitable for clamping, 8, 10 & 12mm thick glass (specify when ordering).
*Glass (8mm,10mmor 12mm thick).
*Rubber gasket (to suit 8mm, 10mm or 12mm thick glass).
Pin used to retain glass.
5mm Gap.
84
36
35
Rubber gasket details.
Inox-900 - For 8mm GlassInox-902 - For 10mm GlassInox-904 - For 12mm Glass
Page 6
of 12
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
29
Inox-523-42.4-SF (For �at surface �xing)
Glass clamp with rubber gaskets and retaining safety pin.The body of the clamp is mechanically �xed to the supporting structure.Suitable for clamping, 8, 10 & 12mm thick glass (specify when ordering).
36
35
Rubber gasket details.
Inox-900 - For 8mm GlassInox-902 - For 10mm GlassInox-904 - For 12mm Glass
Page ?
*Glass (8mm,10mmor 12mm thick).
*Rubber gasket (to suit 8mm, 10mm or 12mm thick glass). Pin used to retain glass.
5mm Gap.
66
6mm Diameterpin with 8mm diameter plasticsleeve.
62
45
Recommended drillingdistance from edge ofglass is 28mm (Approx).Recommended drill size isapprox. 9.5mm Dia.
9mm clearance hole
An M8 threaded hole mustbe created in the wall of the tube in order to accept a M8 bolt, creating a �xing point.
Page 7
of 12
Lockinex (UK) Ltd. Lockinex Works, Eastbourne, Hammonds Drive, East Sussex BN23 6PW Tel: 01323 737 626 Email: [email protected] Web: www.lockinex.com
Page ?
Inox-525-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-527-42.4-SF (To suit 42.4mm x 2mm tube)
Post base clamp with optional cover plate. (Order separate)
Post base clamp. The upright tube is welded to the underside of this bracket.Optional cover plate available (order separately).
100
100 dia.
Applyadhesive
85Inox-906-Cover Plate
Inox-908-Cover Plate
Base plate details
Cover plate details
42.6
28
90
Post base clamp. The upright tube requires 2 holes to be drilled to align with the existingthreaded screw holes in the clamp. Remove screws, slide the tube over the spigot. Insert screws through aligned holes and tighten. As the screws contact the slot they expandthe spigot inside. Apply adhesive for added security.
Inox-529-42.4-SF-100mm (To suit 42.4mm x 2mm tube)
Page 8
of 12
Inox-532-42.4-SF (To suit 42.4mm x 2mm tube)
Side mounted structural post support bracket.
150
Slots 20 x 13mm100
Inox-535-42.4-SF (To suit 42.4mm x 2mm tube)
In line handrail swivel connector. Use adhesive to �x to handrails.
180
25
122
Applyadhesive
Applyadhesive
Inox-538-42.4-SF (To suit 42.4mm x 2mm tube)
In line handrail connector. Use adhesive to �x to hand rails.
Applyadhesive
Applyadhesive
Page 9
of 12
38
42.4
25
50
50
Inox-541-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-544-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-547-42.4-SF (To suit 42.4mm x 2mm tube)
90 Degree handrail connector. Use adhesive to �x to handrails.
“T” handrail connector. Use adhesive to �x to handrails.
In line handrail connector. Comprises of two parts. Twist to o�set required.A bolt is used to secure the two parts through the connection point. Bolt can simply be loosened when a di�erent o�set is required and re-tightened.
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Connection point.
Page 1
0 of 1
2
Page ?Page ?25
50
50
Connection point.
Drill & Threadtube wall.
O�er up�tting andconnect usingbolt supplied.
Glue and insertstraight connector.(Order separate)
Glue and connectrequired lengthof tube.(Order separate)
Inox-550-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-553-42.4-SF (To suit 42.4mm x 2mm tube)
Inox-555-42.4-SF -To suit 42.4mm tube
Four Way handrail connector. Use adhesive to �x to tubes.
Three Way handrail connector. Use adhesive to �x to the tube.
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Applyadhesive
Page 1
1 of 1
2
1 2 3 4 5
Straight tubeconnector shown
for demonstrationpurposes.
Apply adhesiveto leading edge of �tting.
Insert �tting.Rotate half turn
once left, once right.
Connector insertedinto one tube end.
Apply adhesiveto leading edge of �tting.
Insert �tting.Rotate half turn
once left, once right.
View of completed joint.
Adhesive
Inox-800-42.4-SF
Satin �nish.
Stainless steel grade 304 - 42.4 mm Diameter and 2mm wall thickness.
Supplied in 6 mtr lengths
Stainless steel tube.
Page 1
2 of 1
2
Lockinex do not supply adhesive for joining stainless steel handrail systems.
However, it is recommended that the following products be used tojoin components together: Loctite SF 7200 cleaner (clean stainlesssteel prior to applying activator and adhesive), Loctite 7649 activator(applied prior to adhesive), Loctite AA 326 adhesive.
All relevant instructions can be found on the Loctite product packaging.
