NS-Thainox Auto Company Limited, 1 MD Tower 20th Floor, Soi Bangna-Trad 25, Bangna Trad Rd., KM.3 Kwang Bangna, Khet Bangna, Bangkok 10260 ThailandPhone +66-2-744-0720
2-6-1 Otemachi, Chiyoda-ku, Tokyo 100-0004, JapanPhone +81-3-3276-4800
Rm No.1207 Garden Tower, 368 Huanshi Dong Lu,Guangzhou 510064, ChinaPhone +86-20-83652458
Hiroshima-Teppouchou Bldg. 14F,10-12 Teppouchou, Naka-ku,Hiroshima-shi, Hiroshima 730-0017, JapanPhone +81-82-511-5115
NSSC Bangkok Office
NSSC Guangzhou Office
Room 909, UNITED PLAZA, 1468 Nanjing Road West,Shanghai 200040, ChinaPhone +86-21-62892928
Nippon Steel & Sumikin Stainless Steel Consulting[Shanghai] Co.,Ltd.(NSSC Shanghai Office)
Stainless Steel Plates & Sheets Stainless Steel Plates & SheetsHead Office
Sales Offices
Overseas Offices
Works
Yodoyabashi-Mitsui Bldg. 3F, 4-1-1 Imabashi, Chuo-ku, Osaka-shi, Osaka 541-0042, JapanPhone +81-6-4706-1180
Osaka Sales Office
Kyushu Sales Office
Niigata Sales Office
Hakata-NS Bldg. 4F, 5-18 Tenya-machi,Hakata-ku, Fukuoka-shi, Fukuoka 812-8522, JapanPhone +81-92-273-7090
COI-Niigata Bldg. 8F, 1-4-2 Higashi Oodori,Chuo-ku, Niigata-shi, Niigata 950-0087, Japan Phone +81-25-246-3113
NS Bldg. 5F, 2-13-18 Meieki-minami, Nakamura-ku,Nagoya-shi, Aichi 450-0003, JapanPhone +81-52-581-2012
Chugoku Sales Office
Nagoya Sales Office
3434 Ooaza-shimada,Hikari-shi, Yamaguchi 743-8550, JapanPhone +81-833-71-5004
Hikari Works2-1 Hikari, Kashima-shi,Ibaraki 314-0014, Japan Phone +81-299-84-3702
Kashima Works Yawata Works2108-1 Aza-hato, Ooaza-maeda,Yawatahigashi-ku, Kitakyushu-shi,Fukuoka 805-0058, JapanPhone +81-93-672-2356
( Printed on recycled paper ) 2010.10① 2010.10 NCat.No. HE001
For further information, please contact to the following department or nearest officePlate Dept.
Nippon Steel & Sumikin Stainless Steel Corporation Head OfficePhone : +81-3-3276-4846
Facsimile : +81-3-3276-4927
Nippon Steel & Sumikin Stainless Steel Corporation
Nippon Steel & Sumikin Stainless Steel Corporation
1
2
6
8
12
16
17
18
19
20
Stainless Steel Plates & Sheets
FeaturesApplication ExamplesManufacturing FlowAvailable Product GradesSizes AvailableGuide to Selection of Appropriate Grade ofNSSC Series Stainless SteelsList of NSSC Series Stainless SteelsMarking and PackagingProduct Handling InstructionsInformation Required with OrdersMaterial Safety Data Sheet
Contents
Important noticeThe technical information in this document simply describes typical characteristics and performance of the product and does not provide any guarantees except for the items clearly statedas specifications or standard values.Note that NSSC takes no responsibility whatsoever for damage resulting from user failure to observe the instructions presented in this document or improper handling of the product.The information presented in this document is subject to change without notice. Please contact the relevant division for the latest information.No part of this document may be copied or reproduced in any form without the consent of NSSC.
The stainless steel divisions of Nippon Steel Corporation and Sumitomo Metal Industries,
Ltd. were consolidated into a new company named Nippon Steel & Sumikin Stainless Steel
Corporation in 2003.
The most sophisticated stainless steel manufacturing technologies as well as state-of-the-art
quality control systems, developed and held by each of these two companies, have now
been integrated and wholly taken over by this new company.
Moreover, as Nippon Steel & Sumikin Stainless Steel Corporation plans to strengthen R&D
focusing on stainless steel, the company is confident that it will be able to meet the strictest
requirements demanded by customers with its stainless steel plates and sheets.
Features
Stainless Steel Plates & Sheets
Our abundant sizes and superior quality should leadyou to the new horizon of high cost performance.
Wide Range of Products covering Large-Size Plates
High Performance Corrosion Resistance, withAbundant Grades for Various Applied Circumstances
- We have established technologies for extra large-size plates with the state-of-the-art production lines including a quarto rolling mill.- Large plates will enable you to curtail the welding process in fabrication and, as a result, they contribute to reducing your cost and time.- Large plates will also diminish the size of the undesirable heat-affected zone caused by welding.
- Up-to-date equipment, such as a heat treatment furnace, roller quencher, spray type cooling system, and so on, provide complete solid solution treatments for steel products. Moreover, those facilities produce a wide range of grades designed for use in various kinds and levels of corrosive environments. Authentic technical data on each product are available anytime for your reference.
Quality in Uniformly Highest Level- Superior technology as well as extensive quality control from steelmaking to finishing assure the stable production of stainless steel plates in uniformly of excellent quality.
Prompt Delivery- An exclusive rolling mill is available at all times for the production of stainless steel plates. Moreover, an unrivaled volume production system and strict quality control program assure smooth production and on-time delivery.
Marvelously Aesthetic Surface Finishes- We apply the process of surface finishing to our products by pickling or buff-polishing. We would sincerely like you to enjoy the marvelously aesthetic surface finishes of our products.- Levels of finishing can be adjusted according to your requirements.
Application ExamplesStainless Steel Plates & Sheets Application Examples
Desalination Plant LNG satellite
Beer tanks
Hot water tanks Shroud head of light-water reactor for nuclear power plant
Chemical tanker
Petrochemical plant
Application ExamplesStainless Steel Plates & Sheets Application Examples
Dam's head gate tower
Water supply plant
Electric furnaceContinuous casting
Slab conditioning and cutting
Grinding
Gas torch
Powdercutting
Continuous reheating furnace
Rough rolling Finish rolling
Hot leveler Controlled cooling
Ingot castingSlabbing
Melting
Melting
Refining
Refining
AOD
VODOxygen steelmaking
converter
Continuous heat-treating furnace Cooling (roller quenching)
Cooling (spray type) Shot blasting
Cold levelingShearing
Plasma cutting
Surface polishing
Press levelingCooling (dip type)
Electric furnace Continuous caster Plate rolling mill Roller Quenching cooler Multi-purpose cutter Continuous pickling line Belt polisher In-line inspection
Batch-type heat treating furnace
Steelmaking Slab conditioning Plate rolling
Manufacturing FlowStainless Steel Plates & Sheets Manufacturing Flow
VOD : Vacuum Oxygen DecarburizationAOD : Argon Oxygen DecarburizationRQ : Roller Quench
Surface#1 finishing
Continuous pickling
Inspection Packaging
Shipment
Batch-type pickling
Heat treatment Final Conditioning
Available Product GradesStainless Steel Plates & Sheets
304
304H
304L
304N
304LN
309S
310S
316
316L
316H
316LN
317L
317LN
321
347
904L
S31254
SUS 304
SUS 304L
SUS 304N1
SUS 304LN
SUS 309S
SUS 310S
SUS 316
SUS 316L
SUS 316LN
SUS 317L
SUS 317LN
SUS 321
SUS 347
SUS 890L
SUS 317J2
SUS 312L
≦0.07
0.04/0.10
≦0.030
≦0.08
≦0.030
≦0.08
≦0.08
≦0.08
≦0.030
0.04/0.10
≦0.030
≦0.030
≦0.030
≦0.08
≦0.08
≦0.020
≦0.020
≦0.06
≦0.080
≦0.030
≦0.030
≦0.030
≦0.020
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦1.50
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦0.75
≦1.00
≦0.80
≦1.50
≦1.00
≦1.50
≦1.00
≦1.50
≦0.80
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦2.00
≦1.00
≦2.00
≦2.50
≦2.00
≦2.00
≦2.00
≦1.00
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.045
≦0.030
≦0.045
≦0.040
≦0.040
≦0.040
≦0.040
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.035
≦0.010
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.015
8.0/10.5
8.0/10.5
8.0/12.0
8.0/10.5
8.0/12.0
12.0/15.0
19.0/22.0
10.0/14.0
10.0/14.0
10.0/14.0
10.0/14.0
11.0/15.0
11.0/15.0
9.0/12.0
9.0/13.0
23.0/28.0
17.5/18.5
12.00/16.00
7.50/10.50
13.50/16.50
13.00/17.00
16.00/20.00
17.50/19.50
17.5/19.5
18.0/20.0
17.5/19.5
18.0/20.0
18.0/20.0
22.0/24.0
24.0/26.0
16.0/18.0
16.0/18.0
16.0/18.0
16.0/18.0
18.0/20.0
18.0/20.0
17.0/19.0
17.0/19.0
19.0/23.0
19.5/20.5
23.00/26.00
18.00/20.00
18.50/21.50
20.00/23.00
24.00/27.00
19.00/21.00
―
―
―
―
―
―
―
2.00/3.00
2.00/3.00
2.00/3.00
2.00/3.00
3.0/4.0
3.0/4.0
―
―
4.0/5.0
6.0/6.5
0.50/1.20
―
2.50/3.50
3.00/4.00
1.50/3.50
6.00/7.00
N≦0.10
N≦0.10
N:0.10/0.16
N:0.10/0.16
N≦0.10
N≦0.10
N:0.10/0.16
N≦0.10
N:0.10/0.22
N≦0.10Ti:5×(C+N) /0.70
Nb:10×C/1.00
N≦0.10Cu:1.0/2.0
N:0.18/0.22 Cu:0.50/1.00
N:0.25/0.40
N≦0.25 Nb≦0.14
N:0.16/0.24 Cu:1.00/2.00 N:0.10/0.22 Cu:1.50/3.00
N:0.15/0.35
N:0.16/0.25 Cu:0.50/1.00
≧205
≧205
≧170
≧240
≧205
≧205
≧205
≧205
≧170
≧205
≧205
≧205
≧240
≧205
≧205
≧220
≧310
≧345
≧345
≧275
≧315
≧345
≧300
≧515
≧515
≧485
≧550
≧515
≧515
≧515
≧515
≧485
≧515
≧515
≧515
≧550
≧515
≧515
≧490
≧655
≧690
≧690
≧550
≧600
≧690
≧650
≧40
≧40
≧40
≧30
≧40
≧40
≧40
≧40
≧40
≧40
≧40
≧40
≧40
≧40
≧40
≧35
≧35
≧40
≧40
≧35
≧35
≧40
≧35
≦92
≦92
≦92
≦95
≦95
≦95
≦95
≦95
≦95
≦95
≦95
≦95
≦95
≦95
≦92
≦90
≦96
≦100
≦100
≦95
≦95
≦100(≦260)≦96
(≦230)
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
―
≦201
≦201
≦201
≦217
≦217
≦217
≦217
≦217
≦217
≦217
≦217
≦217
≦217
≦217
≦201
―
≦223
≦250
≦250
≦217
≦217
≦250
≦223
(NSSC 270)
NSSC 170
NSSC 304N
NSSC 260
NSSC 260A
NSSC 250
NSSC 270
StainlessSteelGroup
AusteniticSteels
ASTM(A240M)
TypeSymbol of Grades(NSSC)
Others(JIS) C Si Mn P S Ni Cr Mo Others
Mechanical Properties
Yield StrengthMPa
Tensile StrengthMPa
Elongation%
HRBS or HRBW(HV)HBW
Tensile Properties HardnessBend Test
Grade Chemical Composition(%)
Available Product Grades
Available Product Grades
Quality Management System (at Yawata Works) Ship Classification Societies (at Yawata Works)
Approved Standards (at Yawata Works)
Stainless Steel Plates & Sheets
StainlessSteelGroup
FerriticSteels
MartensiticSteels
Austenitic-FerriticSteels
GradeASTM
(A240M)Type
Symbol of Grades(NSSC)
Others(JIS)
Chemical Composition(%) Mechanical Properties
C Si Mn P S Ni Cr Mo Others Yield StrengthMPa
Tensile StrengthMPa
Elongation%
HRBS or HRBW(HV)HBW
Tensile Properties HardnessBend Test
405
430
444
410
410S
S32101**
S32304
S31803
S32205
S32750
SUS 405
SUS 430
SUS 444
SUS 410
SUS 410S
SUS 329J3L
SUS 329J4L
≧170
≧205
≧275
≧205
≧315
≧275
≧175
≧205
≧205
≧450
≧400
≧450
≧450
≧550
≧450
AI:0.10/0.30
N≦0.035*
N≦0.025
Ti:6×C/0.75
N:0.08/0.20
N:0.14/0.20
N:0.08/0.30
≧415
≧450
≧415
≧440
≧430
≧410
≧360
≧450
≧415
≧650
≧600
≧620
≧655
≧795
≧620
≧20
≧22
≧20
≧22
≧20
≧22
≧28
≧20
≧22
≧30
≧25
≧25
≧25
≧15
≧18
≦179
≦183
≦217
≦183
≦230
≦217
―
≦217
≦183
≦290
≦290
≦293
≦293
≦310
≦302
≦88
≦89
≦96
≦88
(≦240)
≦96
(≦180)
≦96
≦89
―
≦32(HRC)
≦31(HRC)
≦31(HRC)
≦32(HRC)
(≦320)
180°
180°
180°
180°
90°
180°
180°
180°
180°
―
―
―
―
―
―
≦1.00
≦1.00
≦1.00
≦1.00
≦1.00
≦0.50
≦1.00
≦1.00
≦1.00
4.0/6.0
≦2.50
≦2.00
≦2.00
≦1.20
≦1.50
≦0.040
≦0.040
≦0.040
≦0.040
≦0.035
≦0.040
≦0.040
≦0.040
≦0.040
≦0.040
≦0.040
≦0.030
≦0.030
≦0.035
≦0.040
≦0.030
≦0.030
≦0.030
≦0.030
≦0.025
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
≦0.020
≦0.020
≦0.020
≦0.030
≦0.60
≦0.75
≦1.00
―
≦0.50
―
―
≦0.75
≦0.60
1.35/1.70
3.0/5.5
4.5/6.5
4.5/6.5
6.0/8.0
5.50/7.50
11.5/14.5
16.0/18.0
17.5/19.5
11.50/13.50
10.75/12.00
18.00/20.00
10.50/11.45
11.5/13.5
11.5/13.5
21.0/22.0
21.5/24.5
21.0/23.0
22.0/23.0
24.0/26.0
24.00/26.00
―
―
1.75/2.50
―
―
1.75/2.25
―
―
―
0.10/0.80
0.05/0.60
2.5/3.5
3.0/3.5
3.0/5.0
2.50/3.50
≦1.00
≦1.00
≦1.00
≦1.00
≦0.50
≦0.50
≦1.00
≦1.00
≦1.00
≦1.00
≦1.00
≦1.00
≦1.00
≦0.80
≦1.00
≦0.08
≦0.12
≦0.025
≦0.030
≦0.030
≦0.015
≦0.030
0.08/0.15
≦0.08
≦0.040
≦0.030
≦0.030
≦0.030
≦0.030
≦0.030
(NSSC 190L)
NSSC 410W
NSSC 410WM
NSSC 190L
NSSC 409L
NSSC DX1
Cb≧8x (C+N)V≦0.20,N≦0.015
N:0.20/0.25 Cu:0.10/0.80N:0.05/0.20Cu:0.05/0.60
N:0.24/0.32Cu≦0.50
** S32101: Sold under license from Outokumpu Stainless AB (re. patents on LDX2101® grade) in the Territory (designated countries). * Ti+Cb:0.20+4(C+N)/0.80
Examiner Quality SystemAccreditation
Scope of AccreditationRegistration
NumberProducts
Examiner Quality SystemAccreditation
Scope of AccreditationRegistration
NumberProducts
JIC Quality Assurance Ltd.
JIC Quality Assurance Ltd. Stainless Steel Plates JIS G 4304 Stainless Steel Plates (Cut-plate and in Coil) QA0806001
No.0035
01 202 J/Q-020005
Remark : European Pressure Vessels Direction
Remark : German Technology Standard
PED97/23/EC
AD2000 W0Stainless Steel PlatesTÜV
ISO9001-2000 1886Design,Development and Production of StainlessSteel and Stainless Clad Steel Plates
Stainless Steel andStainless Clad Steel Plates
Society Products
Nippon Kaiji Kyokai(NK)
Lloyd's Register ofShipping (LR)Det Norske Veritas(DNV)
Bureau Veritas (BV)
The American Bureauof Shipping (ABS)The Korean Registerof Shipping (KR)
Stainless Steel and Stainless Clad Steel Plates
Stainless Steel and Stainless Clad Steel Plates
Stainless Steel and Stainless Clad Steel Plates
Stainless Steel and Stainless Clad Steel Plates
Stainless Clad Steel Plates
Stainless Steel and Stainless Clad Steel Plates
Works Approval Yawata Works
Works Approval Yawata Works ( Mode Ⅰ )
Available Product Grades
Sizes AvailableStainless Steel Plates & Sheets Sizes Available
Ferritic Steels / Martensitic Steels(TYPE 405, 410, 430, 444, NSSC 190L) Austenitic Steels ①(TYPE 304, 304L, 321, 347, 309S, 310S)
Size Size
Length
Unit Weight
Length
Unit Weight
Please contact us when you need other type or size than mentioned above. Please contact us when you need other type or size than mentioned above.
Orders are always acceptable with standard delivery time.
Orders are acceptable subject to conditions.
TYPE 444, NSSC 190L Orders are always acceptable.
TYPE 444, NSSC 190LOrders are acceptable subject to conditions.
Minimum Size Width≧1,219mm , Length≧2,000mm Minimum Size Width≧1,219mm , Length≧2,000mm
Width (m)Thickness (mm)
4.0~4.5
4.5~5.0
5.0~5.5
5.5~6.0
6.0~7.0
7.0~8.0
8.0~9.0
9.0~10.0
10.0~12.0
12.0~20.0
20.0~30.0
30.0~40.0
40.0~50.0
50.0~60.0
60.0~80.0
80.0~100.0
100.0~120.0
120.0~200.0
4.0 to less than 4.5
Width (m)Thickness (mm)
4.0~4.5
4.5~5.0
5.0~5.5
5.5~6.0
6.0~7.0
7.0~8.0
8.0~9.0
9.0~10.0
10.0~12.0
12.0~20.0
20.0~30.0
30.0~40.0
40.0~50.0
50.0~60.0
60.0~80.0
80.0~90.0
90.0~100.0
100.0~110.0
110.0~120.0
120.0~200.0
4.0 to less than 4.5
1.5 2.0 2.5 3.0 3.5 4.0 4.5 1.5 2.0 2.5 3.0 3.5 4.0 4.5
15ton6.5 ton
4.0(Thickness≧18mm)
Maximum thickness by specific type is as below.120mm for TYPE 32145mm for TYPE 34750mm for TYPE 309S, TYPE 310S
Orders are always acceptable with standard delivery time.
Orders are acceptable subject to conditions
12.5m 14m
5ton
12.5m 14m
Stainless Steel Plates & Sheets Sizes Available
Austenitic Steels ②(TYPE 316, 316L, 317L) Austenitic-Ferritic (Dual-phase) Steels(S32304, S31803, S32205, SUS329J3L, NSSC DX1)
Size SizeWidth (m)
Thickness (mm)
4.0~4.5
4.5~5.0
5.0~5.5
5.5~6.0
6.0~7.0
7.0~8.0
8.0~9.0
9.0~10.0
10.0~12.0
12.0~20.0
20.0~30.0
30.0~40.0
40.0~50.0
50.0~60.0
60.0~80.0
80.0~90.0
90.0~100.0
100.0~110.0
110.0~120.0
120.0~200.0
4.0 to less than 4.54.0~4.5
4.5~5.0
5.0~5.5
5.5~6.0
6.0~7.0
7.0~8.0
8.0~9.0
9.0~10.0
10.0~16.0
16.0~18.0
18.0~20.0
20.0~25.0
25.0~30.0
30.0~40.0
40.0~50.0
50.0~60.0
60.0~80.0
80.0~100.0
100.0~200.0
4.0 to less than 4.5
1.5 2.0 2.5 3.0 3.5 4.0 4.5 Width (m)Thickness (mm) 1.5 2.0 2.5 3.0 3.5 4.0 4.5
4.0(Thickness≧18mm)
Length
Unit Weight
Minimum Size Width≧1,219mm , Length≧2,000mm
12.5m
6.5ton 15ton
14m 12.5m
4.5ton 6.5ton
14mOrders are always acceptable with standard delivery time.
Orders are acceptable subject to conditions.
Orders are always acceptable with standard delivery time.
Orders are acceptable subject to conditions.
TYPE 317L : Thickness≦50mm
Please contact us when you need other type or size than mentioned above.
Length
Unit Weight
Minimum Size Width≧1,219mm , Length≧2,000mm
Please contact us when you need other type or size than mentioned above.
Guide to Selection of Approproate Gradeof NSSC Series Stainless Steels
Stainless Steel Plates & Sheets
List of NSSC Series Stainless SteelsStainless Steel Plates & Sheets
Formability,Welded portion toughness
Cr reduction
Corrosion resistance,Formability
Pitting corrosion resistance,Intergranular corrosion resistance
Pittingcorrosion resistance
Mo reduction
Intergranularcorrosion resistance
Intergranular corrosion resistance
Corrosion resistance
Ni reduction
Strength
Strength,Pitting corrosion resistance
Strength,Pitting corrosion resistance
Strength,Pitting corrosion resistance
Strength,Pitting corrosion resistance
Sulfuric acidresistance, Pittingcorrosion resistance
Sulfuric acid resistance,Raw phosphoric acidresistance
Pitting corrosion resistance,Crevice corrosion resistance
Intergranularcorrosion resistance
Pitting corrosion resistance
Pitting corrosion resistancePitting corrosion resistance
Intergranularcorrosion resistance
Corrosionresistance
Heat resistance Heat resistance
Strength
Weldedportion toughness
Corrosionresistance
TP 410 NSSC 410WMNSSC 410W
TP 405
TP 409
TP 430
TP 329
TP 304
NSSC 436S
NSSC DX1
S32304
TP 304L
TP 316L
TP 316
TP 309S
NSSC 304N
NSSC 190L
329J4L
S32101
TP 304LN
TP 316LN
TP 310S
TP 317L
TP 317LN
NSSC 304UL
NSSC 316UL
NSSC 170
NSSC 250
NSSC 260
NSSC 260A
NSSC 270
S32750
StainlessSteelGroup
FerriticSteels
Austenitic-FerriticSteels
AusteniticSteels
Symbol ofGrade
(similar grade)Chemical Composition
Corrosion resistanceOxidation
resistance
Stress corrosion resistance
Pitting corrosion resistance
Intergranular corrosionresistance
Formability Deepdrawability
Strength
Heat-resistance
Weldability Application examples
NSSC 270 ( ー )
NSSC 260A( ー )
NSSC 260( ー )
NSSC 250
NSSC 170(SUS 317J2)
NSSC 304UL(SUS 304L)
NSSC 316UL(SUS 316L)
NSSC 304N(SUS 304N2)
NSSC DX1(SUS 329J3L)
NSSC 190L(SUS 444)
NSSC 436S ( ー )
NSSC 410WM(SUS 410L)
NSSC 410W(SUS 410L)
NSSC 409L(SUH 409)
20Cr-18Ni-6Mo-0.7Cu-0.2N-LC
22Cr-16Ni-3.5Mo-2Cu-0.2N-LC
20Cr-15Ni-3Mo-1.5Cu-0.2N-LC
25Cr-18Ni-2.5Mo-0.3N-LC
25Cr-13Ni-0.9Mo-0.3N
18Cr-10Ni-ULC
17Cr-15Ni-2Mo-ULC
18Cr-8Ni-0.2N
22Cr-5Ni-3Mo-0.13N-LC
19Cr-2Mo-Nb-V-ULC-LN
17Cr-1.2Mo-0.2Ti-LC-LN
11Cr-LC-LN-Ni
12Cr-LC
11Cr-Ti-LC
Seawater water conversiondevice, Chimney,Salt manufacture plant,Food manufacture plant
Exhaust gas desulfurizer,Waste fluid processor,High temperature usage
Nuclear fuel reprocessequipment
Nuclear fuel reprocessequipment
Equipment which needshigher strength thanType 304
Chemical plant,Energy related plant,Chemical tanker
Chemical plant, Hot water tank
Marine container frame material
Heat-resistant equipment
Equipment related toautomotive exhaust system
Automotive exhaust system part,Kitchen equipment,Household electric appliances part ,Building interior material, Gate
Chemical tanker, Chimney,Sulfuric acid plant
Chimney, Sulfuric acid plant
Chemical plant,Food manufacture plant
Marking and Packaging
Record on the actual product
Stainless Steel Plates & Sheets
Precautions in Use
Directions for Ordering
Stainless Steel Plates & Sheets
〔Example〕
GradeProduct Size Heat NumberProduct Number (Plate Number)Works name
Finish
A240 TYPE 30412×2500×6100Heat No. E74800Plate No .123456̶01NSSC YAWATA No.1
Protector
Hoop
Water-resistantcardboard
Products • SHIPPING MARK• GRADE• SIZE• FINISH• NO. OF PLATE• NET MASS• GROSS MASS• C/NO.• NIPPON STEEL & SUMIKIN STAINLESS STEEL CORP.• MADE IN JAPAN
Storage and Unloading
Handling
If stainless steel sheets are improperly handled or used, they cannot
fully exhibit their characteristic features. When handling or using
stainless steel sheets, attention should be paid to the following points.
1. If stainless steel sheets get wet during unloading or storage, rusting will occur. Accordingly, stringent care should be taken to avoid their unloading on rainy days or their getting wet by seawater. Storage at high humidity or in a sulfur-dioxide atmosphere should be avoided. Storage in a dry, clean place is recommended.
2. Damaged packing paper should be repaired.
1. To avoid injury, do not handle unpacked sheets by bare hand. In handling these sheets, careful handling and use of protective gloves are recommended.
When placing ordersPlease include the following information as specifically as possible.
Technical services
1. Standard to be applied for example, JIS G 4304, AISI, ASTM, any special specification, etc.2. Grade for example, JIS (SUS No.), AISI (Type No.), etc.3. Surface Finish as heat-treated or not, pickled or not, Buff finish No., one or both side(s)4. Size Thickness×Width×Length (availability of enlarged scale)5. Volume Number of plate(s) and weight6. Usage and how to be processed Name of plant, Temperature to be applied, Pressure, Kind of liquid or gas applied, Method and conditions of processing, Method of welding, etc.7. Delivery time
Please feel free to consult Nippon Steel & Sumikin Stainless Steel's headquarters as to technical matters such as grade selection and applications of stainless steel sheet and strip. Nippon Steel & Sumikin Stainless Steel is ready to offer appropriate technicalservices on the basis of extensive research and expertise and achievements accumulated over long years of technical services.
Stainless steel sheet and strip can demonstrate their optimum characteristicperformances when the appropriate steel grade is properly selected in termsof application, design, fabrication and other similar conditions. Please placeyour orders after obtaining the advice of Nippon Steel & Sumikin StainlessSteel regarding the above conditions.
2-6-1 Otemachi, Chiyoda-ku, Tokyo 100-0004, JapanProducts Development Division
03-3276-529203-3276-4890
For inquiries, refer to Products Development Div., Nippon Steel & Sumikin Stainless Corporation. Phone : +81-3-3276-4890, Facsimile ; +81-3-3276-5292
[Product name]
[Supplier]
Stainless steel plates and sheetsHeat-resistant steel plates and sheets
Nippon Steel & Sumikin Stainless Steel CorporationAddress : Division in charge : Telephone number : Facsimile number : Emergency address and telephone number : Same as above
Material Safety Data Sheet
Product and company identification1
Composition/information on ingredients2
Hazards identification3
Fire-fighting measures5
Accidentalrelease measures
6
Handling and storage7
Exposure controls/ personal protection
8
Physical and chemical properties
9
Stability and reactivity10First-aid measures4
Substance or preparation
Main ingredients
Preparation(Alloy)
Ingredient Name Conc. (%) CAS No. ICSC No.IronSiliconManganeseNickelChromiumMolybdenumCopperNiobiumTitaniumAluminumTungstenCobalt
[Fe][Si][Mn][Ni][Cr][Mo][Cu][Nb][Ti][Al][W][Co]
7439-89-67440-21-37439-96-57440-02-07440-47-37439-98-77440-50-87440-03-17440-32-67429-90-57440-33-77440-48-4
--017400620029-0240-----
BalanceUnder 5Under 12Under 37Under 32Under 7Under 5Under 2Under 3Under 5Under 3Under 21
At present, we have to effective information on hazards identification under general conditions. However, the fumes resulting from welding, autogenous cutting, etc. and the fine particles resulting from grinding, etc. may irritate the respiratory organs, the mucous membrane of the eye, etc. Burns may result from arcing. Moreover, cutting chips or the like may be injurious to the skin.
Fine particles may be combustible and explosive.
Toxicological information11
Ecological information12
Disposal considerations13
Transport information14
At present, we have no effective epidemiological information on the toxicological(health)effects of this steel product. For some of alloying elements, however, toxicological effects may be pointed out, for example, in cases where the concentration of respective element exceeds a certain level(e.g., allowable concentration)during the operations described in Section 8. The toxicological information is obtained from, for example, the ICSC (supervised by the Environmental Health Bureau, Ministry of Health and Welfare), etc
At present, we have no effective ecological information. For some of alloying elements, however, environmental effects may be pointed out. The ecological information is obtained, for example, from the ICSC (supervised by the Environmental Health Bureau, Ministry of Health and Welfare).etc.
Basically, disposal is entrusted to legally approved industrial waste management contractors. If there is any substance adhering to the waste to be disposed of, the contractor is selected, paying attention to the adhering substances.
In the case of heavy product, exercise care for prevention of load shifting. It is desirable to cover the product with tarpaulin or the like to prevent infiltration of rain water, etc.
Regulatory information15No specific information
Other information16
As the product is a solid, it is not released under general conditions.
Avoid unnecessary wetting with water, contact with acids and high-temperature and high-humidity environments. In the case of heavy product, take precautions to prevent the possibility of falling.
At present, we have no effective information on exposure controls and personal protection under general conditions.When performing welding, autogenous cutting, grinding, cutting, etc., wear masks, goggles, gloves, work clothes, etc. for prevention of fume inhalation and irritation to the mucous membrane and for protection from arcs and cutting chips.
Physical state A silver-white solid under general conditionsPhysical properties Fusion point : 1,455 ~ 1,535℃ Density : Approx.7.64~8.06 g/cm3
The product is stable with low reactivity under general conditions. However, rust may appear if the product comes into contact with water or an oxidizing substance. This rusting may be accompanied with a deficiency of oxygen or the generation of hydrogen.
This data sheet has been drawn up in accordance with ISO 11041-1 “Safety Data Sheet for Chemical Products”, Part 1 “Content and Order of Sections”(hereinafter referred to as “ISO”).The definitions of terms conform to ISO.
In this data sheet, the information which is available at Nippon Steel & Sumikin Stainless Steel Corp. at the time of sheet preparation is furnished to the users as the “reference
After receiving the first-aid measure requied, consult a physician if necessary. Examples of first-aid measures are given below.
If respiration becomes difficult due to fumes or the like, apply a respiratory aid and consult a physician immediately. When a burn is caused by arcing or the like, cool the affected part and receive medical treatment if necessary.If the mucous membrane of the eye or the like is irritated by fumes, fine particles, etc., wash the affected part with water and consult a physician immediately. When the skin is injured by cutting chips or the like, keep the wound clean and receive medical treatment if necessary.
◆
◆
◆
◆
information” for securing safe handling of the product. Referring to this data sheet, the users should take appropriate safety measures on their own responsibility depending on the actual state of handling. This data sheet is not intended for assuring the safety of the product. There is a possibility of hazards which are not described in this data sheet and for which our company does not have any specific information.
Prepared on 1-October-10