6
EUROPE:
PRIMAPOL METAL SPOT Czech RepublicTel: 420-315-817-111Fax: [email protected] WWW.PRIMAPOL.CZ
PRIMASPOT POLSKAPolandTel: 48-32-76-51-600 Fax: [email protected]
PRIMASPOT DEUTSCHLANDGermanyTel: 49-89-208039-334 Fax: 49-89-208039-335 [email protected]
GILINOXRomaniaTel: 40-31-224-0800 Fax: 40-31-224-0804 [email protected]
MAIN OFFICE & WAREHOUSES - ISRAELTEL. 972-8-8631000FAX. [email protected]
SCOPE METALS GROUP
USA:
HADCO METAL TRADING - NY Tel: 800-221-0344Fax: [email protected]
HADCO METAL TRADING - PATel: 800-638-2521Fax: 215-695-2706 [email protected]
MATERIALS TECHNOLOGYSOLUTIONS - NJTel: 973-401-0711Fax: 973-401-1325 [email protected]
HADCO METAL TRADING - FLTampa BayTel: 813-258-4499Fax: [email protected]
HADCO METAL TRADING - FLPompano beachTel: 800-537-9953 Fax: 954-960-0451 [email protected]
THE FAR EAST:
DALIAN BEST METALSChinaTel: 86-411-87187155/255Fax: [email protected]
Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
With an extensive inventory of over 80,000 off-the-shelf items, Scope operates as a one-stop shop on a “just-in-time”, 24-hour delivery basis to domestic customers.
Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.
In addition to exporting from the Eastern Mediterranean, Scope Metals Group operates in Eastern & Central Europe, China and on the East Coast of the United States.
All our products are according to international standards. Quality control is coordinated by an in-house, ISO 9001:2000 certified controller.
Scope’s leading position is supported by state-of-the-art automatic and computerized warehouses and processing equipment:
Advanced cut-to-length and blanking lines
Slitting line
Brushing, polishing and PVC coating line
Band saws (1000 mm DIA)
Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
STAINLESS STEEL
EUROPE:
PRIMAPOL METAL SPOT Czech RepublicTel: 420-315-817-111Fax: [email protected] WWW.PRIMAPOL.CZ
PRIMASPOT POLSKAPolandTel: 48-32-76-51-600 Fax: [email protected]
PRIMASPOT DEUTSCHLANDGermanyTel: 49-89-208039-334 Fax: 49-89-208039-335 [email protected]
GILINOXRomaniaTel: 40-31-224-0800 Fax: 40-31-224-0804 [email protected]
MAIN OFFICE & WAREHOUSES - ISRAELTEL. 972-8-8631000FAX. [email protected]
SCOPE METALS GROUP
USA:
HADCO METAL TRADING - NY Tel: 800-221-0344Fax: [email protected]
HADCO METAL TRADING - PATel: 800-638-2521Fax: 215-695-2706 [email protected]
MATERIALS TECHNOLOGYSOLUTIONS - NJTel: 973-401-0711Fax: 973-401-1325 [email protected]
HADCO METAL TRADING - FLTampa BayTel: 813-258-4499Fax: [email protected]
HADCO METAL TRADING - FLPompano beachTel: 800-537-9953 Fax: 954-960-0451 [email protected]
THE FAR EAST:
DALIAN BEST METALSChinaTel: 86-411-87187155/255Fax: [email protected]
Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
With an extensive inventory of over 80,000 off-the-shelf items, Scope operates as a one-stop shop on a “just-in-time”, 24-hour delivery basis to domestic customers.
Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.
In addition to exporting from the Eastern Mediterranean, Scope Metals Group operates in Eastern & Central Europe, China and on the East Coast of the United States.
All our products are according to international standards. Quality control is coordinated by an in-house, ISO 9001:2000 certified controller.
Scope’s leading position is supported by state-of-the-art automatic and computerized warehouses and processing equipment:
Advanced cut-to-length and blanking lines
Slitting line
Brushing, polishing and PVC coating line
Band saws (1000 mm DIA)
Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
STAINLESS STEEL
ST. ST. TUBULAR PRODUCTS
ST. ST. PRODUCT SIZE (DIA)
304L, 316L, 321, 310S, 904L, 254SMO, Duplex 2205, C-276
PIPES (SEAMLESS / WELDED)1/8" – 20"SCH 5, 10, 40, 80, 160
304L, 316L, 321
TUBES (SEAMLESS / WELDED)1/8" – 16"4 mm - 500 mm
304L, 316L
PRESS TUBES (WELDED)
12 mm – 108 mm
304L, 316L
HOLLOW BARS
OD 32 mm – 250 mm (DIA)
304, 316L
ORNAMENTAL POLISHED TUBES1/2” – 4”6 mm – 150 mm
304, 316L
SQUARE & RECTANGULAR POLISHED TUBES
10 mm – 250 mm
316L
TUBES (SEAMLESS / WELDED)for microelectronics, pharmaceuticals and CFOS
1/4" – 6"
ST. ST. FITTINGS
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Ball valves - Full Range(Threaded, Flanged, SW, BW, FS)
316 1/4" – 10"
Gate and globe valves - Full Range 316 1/2" – 10"
Strainer and check valves - Full Range 316 1/4" – 8"
Flanges - Full Range (socket weld, slip on, blind, weld neck, threaded)
304L, 316L 1/2" – 24"
Forged fittings 3000 LBS - Full Range(Threaded and SW)
304L, 316L 1/4" – 3"
Cast fittings 150LBS - Full Range(Threaded)
304, 316 1/8" – 4"
BW fittings for pipes - Full Range(SCH 10S, 40S, 80S)
304L, 316L, C-276 1/4" – 20"
ST. ST. FITTINGS (CONTINUED)
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Fittings for food and dairy (SMS, RJT, DIN, 3A.) Including ball valves, single valves, butterfly valves and pumps.
304L, 316L1/2" – 8"nw10-nw150
Press fittings 316 15 mm – 108 mm
Fittings, valves, and pumps for pharmaceutical
316L 1/2" – 4"
Fitting for microelectronics industry (orbital welding)7-10RA
316L 1/4" – 1.1/2"
Tube fittings (Twin Ferrule) 316L 1/8" – 1"
ST. ST. FASTENERS
ST. ST. PRODUCT SIZE
A2, A4 304, 316
Machine screws Threaded rods
M2 - M30
#2 - 1.1/2”
All fastener are according to DIN/ANSI standards
Socket head screws U Bolts
Sheet metal screws Blind rivets
Wood screws Clamps
Wedge anchors Pins
Washers Rings
Spring washers Nuts
ST. ST. WELDING CONSUMABLES
PRODUCT SPECIFICATIONS (AWS) SIZE
TIG wires ER308L, ER309L, ER310, ER312, ER316L, ER347 1.2 mm – 3.2 mm
MIG wires E307(EN12072G188Mn), ER308Lsi, ER309Lsi, ER309LMO, ER310, ER316si 0.8 mm – 1.6 mm
Flux cored wires (MAG)E308LT-1/-4, E309LT1-1/-4, E309LMoT1-1/-4, E312T1-1/-4, E316LT-1/-4, E316LT-0-1/-4, E2209T1-1/-4, E347T1-1
1.2 mm – 1.6 mm
Covered arc welding electrodesE307-15, E308L-16, E308Mo-16, E309L, E309Mo-16, E310-16, E312-16, E316L-16, E317-16, E347-16, E320-15
2 mm – 5 mm
TIG nickel alloysERNiCrMo-4, ERNiCr-3, ERNiCrMo-10, ERNiCrMo-3, ER630, ER385, ER2209, ER2507 / Zeron 100
1.2 mm – 3.2 mm
ST. ST. GRATINGS
ST. ST. PRODUCT SIZE BEARER BAR TRANSVERSE BAR (DIA)
304, 316Galvenized / No paint
GRIPWELD A60, A1001000 x 2000 mm1000 x 3000 mm
30 x 3 mm30 x 4 mm30 x 4.5 mm
7 mm
304, 316Galvenized / No paint
RECTAGRID RS801000 x 2000 mm1000 x 3000 mm
25 x 4.5 mm30 x 3 mm
8 mm
ST. ST. FLAT PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
301, 302,304L, 309, 310, 316L, 316TI, 321, 409 410, 420, 430, 3CR12, 17-4-PH, 17-7-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
0.25 mm – 5 mmUp to 2000 mm (width)or cut to your required lengths
303, 304L, 309, 310, 316L, 316TI, 321, 3CR12, 17-4-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
6 mm – 150 mmVarious Sizesor cut to your required lengths
ST. ST. LONG PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
303, 304, 304L, 304 (IMP), 316L, 316(IMP), 316TI, 321, 410, 416, 420, 430, 430F, 431, 440C, 13-8-mo, 15-5-PH, 17-4-PH, C-276, Alloy 20, Monel 400, Alloy 600, Incoloy 800h, 904L, Duplex 2205
2 mm – 500 mm DIA Cut to your required lengths
303, 304, 316L, 440C, 13-8-mo, 15-5-PH, 17-4-PH
2 mm – 100 mm Cut to your required lengths
303, 304, 316L, 321, 17-4-PH 2 mm – 80 mm Cut to your required lengths
303, 304, 310, 316L, 316TI, 15-5-PH, 17-4-PH
2 mm – 100 mm Up to 400 mm (Width)
304, 316L 25X25X3 mm – 100X100X10 mm
304, 316L 35 mm – 240 mm
ST. ST. WIRES
ST. ST. PRODUCT SIZE
304, 316L (Annealed) WIRES 0.5 mm – 5 mm (DIA)
ST. ST. MESH WIRES
ST. ST. PRODUCT SIZE
304, 316 MESH WIRES1000 mm - 1300 mm (Width)0.47 mesh - 325 mesh
PLATES
ROUND BARS
SQUARE BARS
HEXAGON BARS
ANGLES (HRAP)
U,T,I SECTIONS
* Information and images contained in this catalog are intended for informational purposes only. It is the responsibility of the customer to verify the suitability of any productto its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
SHEETSCOILS
FLAT BARS
ST. ST. TUBULAR PRODUCTS
ST. ST. PRODUCT SIZE (DIA)
304L, 316L, 321, 310S, 904L, 254SMO, Duplex 2205, C-276
PIPES (SEAMLESS / WELDED)1/8" – 20"SCH 5, 10, 40, 80, 160
304L, 316L, 321
TUBES (SEAMLESS / WELDED)1/8" – 16"4 mm - 500 mm
304L, 316L
PRESS TUBES (WELDED)
12 mm – 108 mm
304L, 316L
HOLLOW BARS
OD 32 mm – 250 mm (DIA)
304, 316L
ORNAMENTAL POLISHED TUBES1/2” – 4”6 mm – 150 mm
304, 316L
SQUARE & RECTANGULAR POLISHED TUBES
10 mm – 250 mm
316L
TUBES (SEAMLESS / WELDED)for microelectronics, pharmaceuticals and CFOS
1/4" – 6"
ST. ST. FITTINGS
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Ball valves - Full Range(Threaded, Flanged, SW, BW, FS)
316 1/4" – 10"
Gate and globe valves - Full Range 316 1/2" – 10"
Strainer and check valves - Full Range 316 1/4" – 8"
Flanges - Full Range (socket weld, slip on, blind, weld neck, threaded)
304L, 316L 1/2" – 24"
Forged fittings 3000 LBS - Full Range(Threaded and SW)
304L, 316L 1/4" – 3"
Cast fittings 150LBS - Full Range(Threaded)
304, 316 1/8" – 4"
BW fittings for pipes - Full Range(SCH 10S, 40S, 80S)
304L, 316L, C-276 1/4" – 20"
ST. ST. FITTINGS (CONTINUED)
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Fittings for food and dairy (SMS, RJT, DIN, 3A.) Including ball valves, single valves, butterfly valves and pumps.
304L, 316L1/2" – 8"nw10-nw150
Press fittings 316 15 mm – 108 mm
Fittings, valves, and pumps for pharmaceutical
316L 1/2" – 4"
Fitting for microelectronics industry (orbital welding)7-10RA
316L 1/4" – 1.1/2"
Tube fittings (Twin Ferrule) 316L 1/8" – 1"
ST. ST. FASTENERS
ST. ST. PRODUCT SIZE
A2, A4 304, 316
Machine screws Threaded rods
M2 - M30
#2 - 1.1/2”
All fastener are according to DIN/ANSI standards
Socket head screws U Bolts
Sheet metal screws Blind rivets
Wood screws Clamps
Wedge anchors Pins
Washers Rings
Spring washers Nuts
ST. ST. WELDING CONSUMABLES
PRODUCT SPECIFICATIONS (AWS) SIZE
TIG wires ER308L, ER309L, ER310, ER312, ER316L, ER347 1.2 mm – 3.2 mm
MIG wires E307(EN12072G188Mn), ER308Lsi, ER309Lsi, ER309LMO, ER310, ER316si 0.8 mm – 1.6 mm
Flux cored wires (MAG)E308LT-1/-4, E309LT1-1/-4, E309LMoT1-1/-4, E312T1-1/-4, E316LT-1/-4, E316LT-0-1/-4, E2209T1-1/-4, E347T1-1
1.2 mm – 1.6 mm
Covered arc welding electrodesE307-15, E308L-16, E308Mo-16, E309L, E309Mo-16, E310-16, E312-16, E316L-16, E317-16, E347-16, E320-15
2 mm – 5 mm
TIG nickel alloysERNiCrMo-4, ERNiCr-3, ERNiCrMo-10, ERNiCrMo-3, ER630, ER385, ER2209, ER2507 / Zeron 100
1.2 mm – 3.2 mm
ST. ST. GRATINGS
ST. ST. PRODUCT SIZE BEARER BAR TRANSVERSE BAR (DIA)
304, 316Galvenized / No paint
GRIPWELD A60, A1001000 x 2000 mm1000 x 3000 mm
30 x 3 mm30 x 4 mm30 x 4.5 mm
7 mm
304, 316Galvenized / No paint
RECTAGRID RS801000 x 2000 mm1000 x 3000 mm
25 x 4.5 mm30 x 3 mm
8 mm
ST. ST. FLAT PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
301, 302,304L, 309, 310, 316L, 316TI, 321, 409 410, 420, 430, 3CR12, 17-4-PH, 17-7-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
0.25 mm – 5 mmUp to 2000 mm (width)or cut to your required lengths
303, 304L, 309, 310, 316L, 316TI, 321, 3CR12, 17-4-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
6 mm – 150 mmVarious Sizesor cut to your required lengths
ST. ST. LONG PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
303, 304, 304L, 304 (IMP), 316L, 316(IMP), 316TI, 321, 410, 416, 420, 430, 430F, 431, 440C, 13-8-mo, 15-5-PH, 17-4-PH, C-276, Alloy 20, Monel 400, Alloy 600, Incoloy 800h, 904L, Duplex 2205
2 mm – 500 mm DIA Cut to your required lengths
303, 304, 316L, 440C, 13-8-mo, 15-5-PH, 17-4-PH
2 mm – 100 mm Cut to your required lengths
303, 304, 316L, 321, 17-4-PH 2 mm – 80 mm Cut to your required lengths
303, 304, 310, 316L, 316TI, 15-5-PH, 17-4-PH
2 mm – 100 mm Up to 400 mm (Width)
304, 316L 25X25X3 mm – 100X100X10 mm
304, 316L 35 mm – 240 mm
ST. ST. WIRES
ST. ST. PRODUCT SIZE
304, 316L (Annealed) WIRES 0.5 mm – 5 mm (DIA)
ST. ST. MESH WIRES
ST. ST. PRODUCT SIZE
304, 316 MESH WIRES1000 mm - 1300 mm (Width)0.47 mesh - 325 mesh
PLATES
ROUND BARS
SQUARE BARS
HEXAGON BARS
ANGLES (HRAP)
U,T,I SECTIONS
* Information and images contained in this catalog are intended for informational purposes only. It is the responsibility of the customer to verify the suitability of any productto its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
SHEETSCOILS
FLAT BARS
ST. ST. TUBULAR PRODUCTS
ST. ST. PRODUCT SIZE (DIA)
304L, 316L, 321, 310S, 904L, 254SMO, Duplex 2205, C-276
PIPES (SEAMLESS / WELDED)1/8" – 20"SCH 5, 10, 40, 80, 160
304L, 316L, 321
TUBES (SEAMLESS / WELDED)1/8" – 16"4 mm - 500 mm
304L, 316L
PRESS TUBES (WELDED)
12 mm – 108 mm
304L, 316L
HOLLOW BARS
OD 32 mm – 250 mm (DIA)
304, 316L
ORNAMENTAL POLISHED TUBES1/2” – 4”6 mm – 150 mm
304, 316L
SQUARE & RECTANGULAR POLISHED TUBES
10 mm – 250 mm
316L
TUBES (SEAMLESS / WELDED)for microelectronics, pharmaceuticals and CFOS
1/4" – 6"
ST. ST. FITTINGS
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Ball valves - Full Range(Threaded, Flanged, SW, BW, FS)
316 1/4" – 10"
Gate and globe valves - Full Range 316 1/2" – 10"
Strainer and check valves - Full Range 316 1/4" – 8"
Flanges - Full Range (socket weld, slip on, blind, weld neck, threaded)
304L, 316L 1/2" – 24"
Forged fittings 3000 LBS - Full Range(Threaded and SW)
304L, 316L 1/4" – 3"
Cast fittings 150LBS - Full Range(Threaded)
304, 316 1/8" – 4"
BW fittings for pipes - Full Range(SCH 10S, 40S, 80S)
304L, 316L, C-276 1/4" – 20"
ST. ST. FITTINGS (CONTINUED)
PRODUCT GRADES AVAILABLE DIMENSIONS RANGE
Fittings for food and dairy (SMS, RJT, DIN, 3A.) Including ball valves, single valves, butterfly valves and pumps.
304L, 316L1/2" – 8"nw10-nw150
Press fittings 316 15 mm – 108 mm
Fittings, valves, and pumps for pharmaceutical
316L 1/2" – 4"
Fitting for microelectronics industry (orbital welding)7-10RA
316L 1/4" – 1.1/2"
Tube fittings (Twin Ferrule) 316L 1/8" – 1"
ST. ST. FASTENERS
ST. ST. PRODUCT SIZE
A2, A4 304, 316
Machine screws Threaded rods
M2 - M30
#2 - 1.1/2”
All fastener are according to DIN/ANSI standards
Socket head screws U Bolts
Sheet metal screws Blind rivets
Wood screws Clamps
Wedge anchors Pins
Washers Rings
Spring washers Nuts
ST. ST. WELDING CONSUMABLES
PRODUCT SPECIFICATIONS (AWS) SIZE
TIG wires ER308L, ER309L, ER310, ER312, ER316L, ER347 1.2 mm – 3.2 mm
MIG wires E307(EN12072G188Mn), ER308Lsi, ER309Lsi, ER309LMO, ER310, ER316si 0.8 mm – 1.6 mm
Flux cored wires (MAG)E308LT-1/-4, E309LT1-1/-4, E309LMoT1-1/-4, E312T1-1/-4, E316LT-1/-4, E316LT-0-1/-4, E2209T1-1/-4, E347T1-1
1.2 mm – 1.6 mm
Covered arc welding electrodesE307-15, E308L-16, E308Mo-16, E309L, E309Mo-16, E310-16, E312-16, E316L-16, E317-16, E347-16, E320-15
2 mm – 5 mm
TIG nickel alloysERNiCrMo-4, ERNiCr-3, ERNiCrMo-10, ERNiCrMo-3, ER630, ER385, ER2209, ER2507 / Zeron 100
1.2 mm – 3.2 mm
ST. ST. GRATINGS
ST. ST. PRODUCT SIZE BEARER BAR TRANSVERSE BAR (DIA)
304, 316Galvenized / No paint
GRIPWELD A60, A1001000 x 2000 mm1000 x 3000 mm
30 x 3 mm30 x 4 mm30 x 4.5 mm
7 mm
304, 316Galvenized / No paint
RECTAGRID RS801000 x 2000 mm1000 x 3000 mm
25 x 4.5 mm30 x 3 mm
8 mm
ST. ST. FLAT PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
301, 302,304L, 309, 310, 316L, 316TI, 321, 409 410, 420, 430, 3CR12, 17-4-PH, 17-7-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
0.25 mm – 5 mmUp to 2000 mm (width)or cut to your required lengths
303, 304L, 309, 310, 316L, 316TI, 321, 3CR12, 17-4-PH, 15-5-PH, C-276, Alloy 600, 904L, Duplex 2205
6 mm – 150 mmVarious Sizesor cut to your required lengths
ST. ST. LONG PRODUCTS
ST. ST. PRODUCT SIZE (THICKNESS)
SIZE(DIMENSIONS = WIDTH and/or LENGTH)
303, 304, 304L, 304 (IMP), 316L, 316(IMP), 316TI, 321, 410, 416, 420, 430, 430F, 431, 440C, 13-8-mo, 15-5-PH, 17-4-PH, C-276, Alloy 20, Monel 400, Alloy 600, Incoloy 800h, 904L, Duplex 2205
2 mm – 500 mm DIA Cut to your required lengths
303, 304, 316L, 440C, 13-8-mo, 15-5-PH, 17-4-PH
2 mm – 100 mm Cut to your required lengths
303, 304, 316L, 321, 17-4-PH 2 mm – 80 mm Cut to your required lengths
303, 304, 310, 316L, 316TI, 15-5-PH, 17-4-PH
2 mm – 100 mm Up to 400 mm (Width)
304, 316L 25X25X3 mm – 100X100X10 mm
304, 316L 35 mm – 240 mm
ST. ST. WIRES
ST. ST. PRODUCT SIZE
304, 316L (Annealed) WIRES 0.5 mm – 5 mm (DIA)
ST. ST. MESH WIRES
ST. ST. PRODUCT SIZE
304, 316 MESH WIRES1000 mm - 1300 mm (Width)0.47 mesh - 325 mesh
PLATES
ROUND BARS
SQUARE BARS
HEXAGON BARS
ANGLES (HRAP)
U,T,I SECTIONS
* Information and images contained in this catalog are intended for informational purposes only. It is the responsibility of the customer to verify the suitability of any productto its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
SHEETSCOILS
FLAT BARS
EUROPE:
PRIMAPOL METAL SPOT Czech RepublicTel: 420-315-817-111Fax: [email protected] WWW.PRIMAPOL.CZ
PRIMASPOT POLSKAPolandTel: 48-32-76-51-600 Fax: [email protected]
PRIMASPOT DEUTSCHLANDGermanyTel: 49-89-208039-334 Fax: 49-89-208039-335 [email protected]
GILINOXRomaniaTel: 40-31-224-0800 Fax: 40-31-224-0804 [email protected]
MAIN OFFICE & WAREHOUSES - ISRAELTEL. 972-8-8631000FAX. [email protected]
SCOPE METALS GROUP
USA:
HADCO METAL TRADING - NY Tel: 800-221-0344Fax: [email protected]
HADCO METAL TRADING - PATel: 800-638-2521Fax: 215-695-2706 [email protected]
MATERIALS TECHNOLOGYSOLUTIONS - NJTel: 973-401-0711Fax: 973-401-1325 [email protected]
HADCO METAL TRADING - FLTampa BayTel: 813-258-4499Fax: [email protected]
HADCO METAL TRADING - FLPompano beachTel: 800-537-9953 Fax: 954-960-0451 [email protected]
THE FAR EAST:
DALIAN BEST METALSChinaTel: 86-411-87187155/255Fax: [email protected]
Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
With an extensive inventory of over 80,000 off-the-shelf items, Scope operates as a one-stop shop on a “just-in-time”, 24-hour delivery basis to domestic customers.
Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.
In addition to exporting from the Eastern Mediterranean, Scope Metals Group operates in Eastern & Central Europe, China and on the East Coast of the United States.
All our products are according to international standards. Quality control is coordinated by an in-house, ISO 9001:2000 certified controller.
Scope’s leading position is supported by state-of-the-art automatic and computerized warehouses and processing equipment:
Advanced cut-to-length and blanking lines
Slitting line
Brushing, polishing and PVC coating line
Band saws (1000 mm DIA)
Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
STAINLESS STEEL
