+ All Categories
Home > Documents > Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need:...

Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need:...

Date post: 06-Mar-2018
Category:
Upload: nguyendien
View: 218 times
Download: 5 times
Share this document with a friend
5
Materials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue also Gilding Flakes Select the Sam Poole `art flowers` stamp plate & the flower frame from the `stamps to die for...` range along with the Tim Holtz frosted film, a self adhesive sheet and parchment. The clearly art product is optional. Ink the stamp by tapping the coffee archival ink pad over the stamp to build up the ink. Stamp the image directly onto the frosted film & cover with clear Cosmic Shimmer embossing powder. Roughly cut around the design & place the flower onto a piece of parchment. Grand CaliburDie Cutting Machine Spellbinders Enchanted Frame Die & Labels 28 Die Parchment Tim Holtz Frosted Film, Game Spinners & Sketchbook Tissue Tape Sam Poole A5 Art Flowers Plate Non- Stick Craft Sheet Coffee Archival Ink Pad & Cosmic Shimmer Clear Embossing Powder Creative Expressions Stamps to Die For ....Flower Frame Cosmic Shimmer Persian Dawn - Gilding Flakes Deep Red & Cast Bronze Creative Expressions Gilding Wax Wax Paper, Heat Tool & Rub It Scrub It Cut`n`Dry Foam & Cut`n`Dry Felt Coconut A4 Card, Antique Card & Red Hammered Card Cosmic Shimmer Flake & Glitter Glue Adirondack Gold Dabber Self Adhesive Pearl Swirl This workshop features a few ideas using the Cosmic Shimmer gilding flakes and also the flake and glitter glue. The Flower created by stamping onto Tim Holtz frosted film. Cut a piece of the frosted film and make sure it is lying flat and with no crease marks on the film. Heat set the embossing powder making sure the heat tool is moved about on the film so it doesn`t scorch. The embossing powder will turn quickly so there should be no issue but it was just worth mentioning to be careful.
Transcript
Page 1: Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue – also Gilding Flakes Select the Sam Poole

Materials You Will

Need:

Stamp with Cosmic Shimmer Flake &

Glitter Glue – also Gilding Flakes

Select the Sam Poole `art flowers` stamp

plate & the flower frame from the `stamps to

die for...` range along with the Tim Holtz

frosted film, a self adhesive sheet and

parchment. The clearly art product is optional.

Ink the stamp by tapping the

coffee archival ink pad over the

stamp to build up the ink.

Stamp the image

directly onto the

frosted film & cover

with clear Cosmic

Shimmer

embossing powder.

Roughly cut around

the design & place

the flower onto a

piece of parchment.

Grand Calibur™ Die Cutting Machine Spellbinders Enchanted Frame Die & Labels 28 Die Parchment Tim Holtz Frosted Film, Game Spinners & Sketchbook Tissue Tape Sam Poole A5 Art Flowers Plate Non- Stick Craft Sheet

Coffee Archival Ink Pad & Cosmic Shimmer Clear Embossing Powder Creative Expressions Stamps to Die For ....Flower Frame Cosmic Shimmer Persian Dawn - Gilding Flakes Deep Red & Cast Bronze Creative Expressions Gilding Wax

Wax Paper, Heat Tool & Rub It Scrub It Cut`n`Dry Foam & Cut`n`Dry Felt

Coconut A4 Card, Antique Card & Red Hammered Card Cosmic Shimmer Flake & Glitter Glue Adirondack Gold Dabber Self Adhesive Pearl Swirl

This workshop features a few ideas using the

Cosmic Shimmer gilding flakes and also the

flake and glitter glue. The Flower created by

stamping onto Tim Holtz frosted film.

Cut a piece of the frosted

film and make sure it is

lying flat and with no

crease marks on the film.

Heat set the embossing powder making

sure the heat tool is moved about on

the film so it doesn`t scorch. The

embossing powder will turn quickly so

there should be no issue but it was just

worth mentioning to be careful.

Page 2: Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue – also Gilding Flakes Select the Sam Poole

Repeat the process and stamp &

emboss 3 more heads of the flower

before added them to the parchment.

Cut out the main flower and stem using a small pair of scissors or

decoupage snips. Leave a small area of parchment around the image

so the embossing powder does not chip. Cut out one full flower

head & then just one with 3 petals & the other is just the clock face.

.

Select the stamps to die for... flower frame, the flake &

glitter glue, the Cosmic Shimmer Persian Dawn gilding

flakes, a scrapper & and piece of cut`n`dry foam.

Take a scrapper tool or

even a flat ice lolly stick

and work the glue into the

top of the cut`n`dry foam.

Open the jar of gilding

flakes & with the stamped

image in a container ease

some of the flakes out.

Add a layer of the Cosmic Shimmer flake &

glitter glue to the piece of cut`n`dry foam to

start to create your own glue pad.

Add the frame stamp onto an acrylic block and

gently tap the loaded glue foam onto the

stamp. PLEASE HAVE A BOWL OF WATER READY

TO PLACE THE STAMP INTO AS SOON AS IT IS USED.

IF THIS IS NOT DONE IT WILL RUIN YOUR STAMP.

Stamp the image onto a piece of the

antique gold card. Make sure the

image is just kissed onto the card &

removed quickly else the glue will

stick the stamp & the card together.

Once completed the foam will

look like this. If you don`t feel

there is enough glue on the

pad, add another layer but

don`t overload the foam.

Add a layer of the flakes onto

the tacky image making sure

there is a nice amount of

flakes as any excess will be

returned to the pot.

Page 3: Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue – also Gilding Flakes Select the Sam Poole

Rub the flakes into the image making

sure more flakes are added into any area

that has been missed.

Add other frames which you

want in your project onto the

large Grand Calibur™ plate.

Make sure the smaller

enchanted frame is cut in the

antique gold card.

Pass the base plate, the dies and cutting plate sandwich through the Grand Calibur ™ die cutting machine.

Remove the backing

from the frame.

Then place the frame in a plastic box

and tip the Cosmic Shimmer gilding

flakes over the adhesive sheet.

Take a piece of the rub it scrub foam & work this flat across the

surface of the card, this will bring up the detail of the stamped

image leaving it smooth and it will remove any unwanted flakes.

Return the excess pieces of

gilding flakes back into the

pot or alternatively leave the

flakes in a lidded container so

they will be ready to use on

another project.

A good tip when using adhesive sheets and flakes or micro beads is to cut

away any card that will be covered with a die cut shape as you`ll use less

product which wouldn`t be seen any way & they`ll be a cut shape for another

project. So cut the largest labels 28 die in a pearl white card & place the next

size down die in the centre of the frame & cut these two shapes out.

Attach to a piece of white card to a piece

of adhesive film leaving the top side with

the film backing on, and then add a piece

of wax paper in between the die and

adhesive sheet. Secure the pieces with

some low tack tape.

Page 4: Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue – also Gilding Flakes Select the Sam Poole

Press the gilding flakes into the

sticky sheet.

Now remove the frame from the box and place it on

a piece of copy or scrap paper. Use the rub it scrub

it foam to burnish the flakes into the frame.

Lay the prepared elements of the project to gain

an idea of how they will be arranged later on.

With the smaller enchanted frame on mat, dab some of

the Adirondack gold paint around the edges of the frame.

Now go in with the deep red gilding

wax to bring the colours from the

gilding flakes in the frame.

Add foam tape to the back of the frame.

Use the solid areas & add 3d glue on the

corners if you want them secured down.

So now the layers are building up, fold an A4

sheet of hammered red card in half. Attach

the tissue tape around the 4 edges of the card

leaving a 2mm gap of red card.

Either add some of the Creative Expressions cast

bronze gilding wax to the tip of your finger or add it to

a piece of felt foam. Add the wax at random over the

tape making sure you press into the tape to pick up

the hammered card effect.

Page 5: Stamp with Cosmic Shimmer Flake & Glitter Glue also ... · PDF fileMaterials You Will Need: Stamp with Cosmic Shimmer Flake & Glitter Glue – also Gilding Flakes Select the Sam Poole

Place the frame onto the prepared base card.

Add the pearl white labels 28 shape to frame

again using foam tape for added dimension.

Select a Tim Holtz game spinner as these

are ideal to join the clock face & flower

heads together.

Piece a pin, scissors or

a small pokey tool

through the centre of

the flowers heads.

Stamp a `Follow your Dreams` sentiment

on a piece of card using the coffee ink

pad. Cut the sentiment out & add it to the

corner of the card once it`s assembled.

Layer the small enchanted frame onto the

card with foam tape & the attach the

stamped with gilded flake panel onto the

card with double foam tape pieces added to

the top and bottom of the panel to take into

account of the depth of the horizontal frame.

Add the flower & sentiment onto

the card using 3d glue or some

Cosmic Shimmer glue to complete

the project.

Use the brads to secure the game

spinners through all 4 layers of the

flower. Once in place curve the petals

upward to add dimension to the piece.


Recommended