A PRODUCT OF
CERTIFIED
STAND PIPE SYSTEMS
www.sffecoglobal.com
PRODUCING TRUST IN FIRE AND SAFETY
SFFECO with its more than 30 years of experience has always been a progressive organization that has remained in the forefront of the �re �ghting industry with innovative, re-engineered and unique products.
SFFECO in its state-of-the-art manufacturing plants in RIYADH & DUBAI works in close connections with renowned governmental and certi�cation bodies to provide key answers to the challanges faced by the society.
SFFECO brings together over 3-Decades of expertise and experience in form of Design, Consultancy, Testing, Commissioning, Maintenance & Refurbishment of �re protection and �re �ghting systems.
LANDINGVALVES & BREECHING INLET
Kitemark™ CertificateNo. KM 635798
First Issued: 09/07/2015Latest Issue: 09/07/2015
Page: 1 of 3
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.To check its validity telephone +44 (0) 845 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Kitemark™ Certificate
This is to certify that:Saudi Factory For Fire Equipment FZCoP.O. Box 261281Jebel Ali Free ZoneDubai
United Arab Emirates
Holds Certificate Number:KM 635798In respect of:
BS 5041: 1 & 2 1987 and BS 5041: 3 1975Fire Hydrant Systems Equipment Landing Valves and Inlet BreechingThis issues the right and licence to use the Kitemark in accordance with the Kitemark Terms and Conditions
governing the use of the Kitemark, as may be updated from time to time by BSI Assurance UK Ltd (the "Conditions").
All defined terms in this Certificate shall have the same meaning as in the Conditions.The use of the Kitemark is authorized in respect of the Product(s) detailed on this Certificate provided at or from the
above address.
For and on behalf of BSI:Gary Fenton, Global Product Certification Director
First Issued: 09/07/2015Latest Issue: 09/07/2015
Page: 1 of 3
This certificate has been issued by and remains the property of BSI Assurance UK Ltd, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP, United
Kingdom and should be returned immediately upon request.To check its validity telephone +44 (0) 845 080 9000. An electronic certificate can be authenticated online.
BSI Assurance UK Limited, registered in England under number 7805321 at 389 Chiswick High Road, London W4 4AL, UK.
A member of BSI Group of Companies.
Sffeco’s Entire product range of hose valves or landing valves and breeching are certi�ed by British Standard Institute ( BSI ) and conforming to BS5041.
A �re hydrant system is the back bone of any water based �re extinguishment system and landing valves play a vital role, wherein the �re brigades can connect their hoses for getting the water connection for �re. The hose valves are found almost every where for example under the public roads, in large buildings, in Tunnels, on Chemical plants, onshore and offshore platforms, on board ships etc.
Sffeco’s hose valves or landing valves and breeching are designed to be robust, not freeze in harsh environments, and operate in a �re in accordance with �re testing regulations. Some also include a reducing valve to regulate the outlet pressure with a varying inlet pressure which is required in some installations.
Screwed InletMODEL H (mm) W (mm) Inlet OutletSIZE
KM-OBLVS DN65 200 218 2.5”BSP(F) BS336
OBLIQUETYPELANDING VALVES
Specifications Standard Certi�cate to BS5041-1
Body Copper alloy, Thickness > 3mm
Handwheel Grey cast iron
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 22.5 bar
Flow Rates More than 8.5 L/s
Fully open 4.5 turns
_
Flanged InletMODEL SIZE H ( mm ) W ( mm ) Inlet Outlet
KM-OBLVF DN65 198 235 185 BS336
KM 635798
MODEL SIZE
SFD-K50-RLVF
SFD-K65-RLVF
DN50
DN65
198
198 223
213 165
185
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
Specifications Standard Certi�cate to BS5041-1
Body Copper alloy, Thickness > 3mm
Handwheel Grey cast iron alloy
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 22.5 bar
Fully open 4.5 turns
_
RIGHTANGLE TYPELANDING VALVES
MODEL SIZE
SFD-K65-RLVST
SFD-K65-RLVS
DN65
DN65
205
200 205
205 2.5”BSPT
2.5” BSP
H (mm) W (mm) Inlet Outlet
BS336
BS336
Screwed Inlet Flanged Inlet
KM 635798
STRAIGHTTHROUGHLANDING VALVES
SpecificationsStandard Certi�cate to BS5041-1
Body Copper alloy, Thickness > 3mm
Handwheel Grey cast iron alloy
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 22.5 bar
Fully open 4.5 turns
_
MODEL SIZE
SFD-K65-SLVST
SFD-K65-SLVS
DN65
DN65
235
235 213
213 2.5”BSPT
2.5” BSP
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
MODEL SIZE
SFD-K50-SLVF
SFD-K65-SLVF
DN50
DN65
270
280 180
180 165
185
H (mm) W (mm) Inlet Outlet
BS336
BS336
Screwed Inlet Flanged Inlet
KM 635798
Screwed Inlet Flanged Inlet
BIB NOSETYPELANDING VALVES
Specifications Standard Certi�cate to BS5041-1
Body Copper alloy, Thickness > 3mm
Handwheel Grey cast iron alloy
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 22.5 bar
Fully open 4.5 turns
_
MODEL SIZE
SFD-K50-BLVF
SFD-K65-BLVF
DN50
DN65
240
250 225
225 165
185
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
MODEL SIZE
SFD-K65-BLVST
SFD-K65-BLVS
DN65
DN65
225
225 263
263 2.5”BSPT
2.5” BSP
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
KM 635798
MODEL SIZE
SFD-K65-GLVF DN65 300 155 185
H ( mm ) W ( mm ) Inlet Outlet
BS336
WEDGETYPELANDING VALVES
Specifications Standard Certi�cate to BS5041-2
Body Copper alloy, Thickness > 3mm
Handwheel Grey cast iron alloy
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 22.5 bar
Fully open 4.5 turns
_
MODEL SIZE
SFD-K65-GLVS
SFD-K65-GLVST
DN65
DN65
255
255 138
155 2.5”BSPT
2.5” BSP (F)
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
Screwed Inlet Flanged Inlet
KM 635798
PRESSUREREGULATING“E” TYPE LANDING VALVES
KM 635798
Specifications Standard Certi�cate to BS5041-1
Body Copper alloy, Thickness > 4mm
Handwheel Grey cast iron alloy
Blank cap Copper alloy
Inlet Flanged or BSP Screwed
Outlet Female instantaneous to BS336
Surface Red or Yellow Painting
Test Pressure 30 bar
Fully open 4.5 turns
_
MODEL SIZE
SFD-K50-PRVF
SFD-K65-PRVF
DN50
DN65
380
380 225
225 165
185
H ( mm ) W ( mm ) Inlet Outlet
BS336
BS336
MODEL SIZE
SFD-K65-PRVS DN65 380 260 2.5”BSPT
H ( mm ) W ( mm ) Inlet Outlet
BS336
Inlet pressure 20bar, regulating outlet static pressure 5 ~ 8 bar.
Inlet pressure 30bar, regulating outlet static pressure >20 bar.
Screwed Inlet Flanged Inlet
BREECHING INLETCOLLECTING HEAD
Specifications Standard Certi�cate to BS5041-3
Body Ductile Cast Iron
Drain Valve 1” Gate Valve BS 5154
Non-Return Test 1.7 Bar
Inlet Copper Alloy to BS1400
Blank Cap Plastic
Working Pressure 20 Bar
Test Pressure 30 Bar
MODEL SIZE H ( mm ) W ( mm ) D ( mm ) Connections
KM-BI2W DN100 190 300 100 2 x BS336
MODEL SIZE
KM-BI4W DN150 230 330 150
H ( mm ) W ( mm ) D ( mm ) Connections
4 x BS336
4 Way Breeching Inlet2 Way Breeching Inlet
KM 635798
BREECHING INLET CABINET
ADDITIONALACCESSORIES
MODEL
SDR 096 (2 Way Breeching Inlet Cabinet)
SDR 116 (4 Way Breeching Inlet Cabinet)
460
600 600
575 300
300
H (mm) W (mm) D (mm)
PRESSURE REDUCING VALVEA pressure reducing valve is mainly used in a hose reel system to reduce the pressure at the inlet of the hose reel to the nominal working pressure.
Model : SF-PRV-X ( where X is the size and type)Material : BrassWorking Pressure : Inlet Pressure upto 20 bar outlet pressure between 1 to 4 barAvailable Sizes : ½” NPT | ¾” NPT | 1” BSP | 1” NPT | 1 ½” NPT | 2” BSP | 2” NPT
Cabinet : Mild Steel, Stainless steelGlass : Wire Meshed ReinforcementFinish : RedInstallation: Wall Recess MountedLettering : Any Language
AIR RELEASE VALVEAir Releae valves are designed to vent entrained airthat collects at high points in a pipeline. This Valve continuously eliminates air from a system by releasing small quantities of air before large air pocket can occur in the system.
Model : SWR 103 - Inlet : 20mm (3/4”) ø BSPModel : SWR 104 - 25mm (1”) ø BSPMaterial : Copper AlloyTest Pressure : 350 PSI
LOCK SHIELD VALVE