2 www.protech.net
standard box configurations
STANDARD SIZES ALUMINUM BOX STEEL BOX
18”H x 18”D x 18”L - Single Door 20-2068 22-2018B
18”H x 18”D x 24”L - Single Door 20-2070 22-2028B
18”H x 18”D x 30”L - Single Door 20-2073 22-2029B
18”H x 18”D x 36”L - Single Door 20-2170 22-2128B
18”H x 18”D x 36”L - Double Door 20-2175* 22-2138*
18”H x 18”D x 48”L - Single Door 20-2270 22-2228B
18”H x 18”D x 48”L - Double Door 20-2275* 22-2238*
18”H x 18”D x 60”L - Single Door 20-2370 22-2328B
18”H x 18”D x 60”L - Double Door 20-2375* 22-2338*
18”H x 18”D x 72”L - Single Door 20-2670 22-2330B
18”H x 18”D x 72”L - Double Door 20-2675* 22-2348*
18”H x 24”D x 24”L - Single Door 20-2090 22-2050B
18”H x 24”D x 30”L - Single Door 20-2093 22-2053B
18”H x 24”D x 36”L - Single Door 20-2190 22-2150B
18”H x 24”D x 36”L - Double Door 20-2195* 22-2155*
18”H x 24”D x 48”L - Single Door 20-2290 22-2250B
18”H x 24”D x 48”L - Double Door 20-2295* 22-2255*
18”H x 24”D x 60”L - Single Door 20-2390 22-2350B
18”H x 24”D x 60”L - Double Door 20-2395* 22-2355*
18”H x 24”D x 72”L - Single Door 20-2690 22-2358B
18”H x 24”D x 72”L - Double Door 20-2695* 22-2358*
24”H x 24”D x 24”L - Single Door 20-2004 22-2032B
24”H x 24”D x 30”L - Single Door 20-2005 22-2033B
24”H x 24”D x 36”L - Single Door 20-2104 22-2132B
24”H x 24”D x 36”L - Double Door 20-2114* 22-2135*
24”H x 24”D x 48”L - Single Door 20-2204 22-2232B
24”H x 24”D x 48”L - Double Door 20-2214* 22-2235*
24”H x 24”D x 60”L - Single Door 20-2304 22-2332B
24”H x 24”D x 60”L - Double Door 20-2314* 22-2335*
24”H x 24”D x 72”L - Single Door 20-2604 22-2342B
24”H x 24”D x 72”L - Double Door 20-2614* 22-2345*
ALL STANDARD BOX DimeNSiONS ShOwN iN ThiS BROChURe ARe LiSTeD iN ThiS ORDeR: hEIghT x DEpTh x LENgTh.* On Double Swing Door Boxes, specify left-hand (driver side) or right-hand (passenger side).
steel and aluminum styles
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 3TN: 800.525.7998
WA: 800.443.6153
standard tool boxes
20-2214L
20-2190D
20-2068
20-2018B
22-2235L
aluminum Tool boxes• 18”H. x 18”D. x Length Singledoorboxescomestandardwithlanyards.
• 18”H. x 24”D. x Length
• 24”H. x 24”D. x Length
• Standard Lengths:
18”, 24”, 30”, 36”, 48”, 60”, 72”
Any Aluminum Pro-Tech box may be ordered with the diamond plate doors. Just add “D” to the back of the part number.
Double swing doors are available on any 36” or longer box.
sTeel Tool boxes• 18”H. x 18”D. x Length
• 18”H. x 24”D. x Length
• 24”H. x 24”D. x Length
• Standard Lengths:
18”, 24”, 30”, 36”, 48”, 60”, 72”
Steel tool boxes are manufactured with a black powder coat finish.
Double swing doors are available on any 36” or longer box.
Single door steel boxes come standard with lanyards.
Now available in white powder coat finish.
Tool box mounTing brackeTs 20-9700 for24”deepboxes20-9710 for18”deepboxes
Coatedsteelconstruction.Designedforframemountingofboxes.
4 www.protech.net
convenient storage options
20-245020-246020-247020-248020-2490
20-2911-2420-2911-31
cab enTry boxes20-2911-2415”Hx30”Dx24”L 20-9751AngleMount20-2911-3115”Hx30”Dx31”L
Bulb-sealed,weatherresistantboxwithstainlesst-lock.Replaceablefrontstepassembly.
inframe Tool boxes20-26478”D20-264910”D
24”Wx22”L.Overalldimensions:30”Wx22”LIncludesmountingclipsandboltstoclampboxtotruckframe.8”to10”deep.
aluminum baTTery box20-2959 BatteryBoxwithstep,15”Hx30”Dx30”L20-2953 BatteryBoxonly,15”Hx22”Dx30”L
20-5213 TopStep20-5215 BottomStep
Alsoavailablewith:20-5217 LoweredStep20-9753 AngleMountKitforBatteryBox20-9953 J-mountingKit(forBatteriesonly)
20-295920-2647-8”D20-2649-10”D
aluminum sTep boxes20-2450 25”Hx28”Dx12”L 20-2480 25”Hx28”Dx30”L20-2460 25”Hx28”Dx18”L 20-2490 25”Hx28”Dx36”L20-2470 25”Hx28”Dx24”L
Pro-Techaluminumstepboxesprovidestoragespaceinconjunctionwithaframestep.Stepboxeshavesmoothaluminumbodiesandaluminumdiamondplatedoors.BulbtypesealsandstainlesssteelkeyedT-latchesarestandard.Stepboxescomeascompleteunitswithtopplatformandstepsinstalled.12”,18”and24”boxescomewithbuilt-inmountingbrackets.Externalmountingbracketsarerequiredon30”andlargerboxes.Customsizesarealsoavailable!Boxesmaybeorderedwithoutsteps.Alsoavailablewithsmoothpolisheddoors,justadd“S”tothebackofthepartnumber.
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 5TN: 800.525.7998
WA: 800.443.6153
convenient storage options
15” x 15” aluminum or sTeel Tool boxes• 15” x 15” x 18”, 24” or 30” longSingle drop down door, available in aluminum or steel.
20-2410
20-2401
slope-lid aluminum Tool boxes20-2410 19”Hx20”Dx30”L20-2401 19”Hx25”Dx24”L(Designedtomountbetweencabrackfeet)20-2412 24”Hx24”Dx24”L
Smoothbody,diamondplatelid.
20-9741 MountingKitfor20-2401box
drawer modules• Fits 18” x 18” x 24” or 30” boxesHeavydutydrawerslides,allaluminumconstruction.Comesstandardwithtwo3”drawersandone4¼”drawer.Stack‘emupandcombinethemforlongerboxsizes!
Hasp-Type sTeel Tool boxes22-2432 18”Hx18”Dx24”L
Topopenlid,hasp-typelatch,flattop.
22-2432
cab racks
6 www.protech.net
sTandard cab racks10-1003 65”Hx70”W10-1033 68”Hx70”W10-1083 68”Hx80”W10-1093 68”Hx86”W10-1103 68”Hx90”W
deluxe cab racksdx3 StandardCabRackwith2chainhangersandfullchaintraydx4 StandardCabRackwith2chainhangersand2chaintrays
AvailableonanyStandardCabRack.(10-1093-DX3shownwith10-4425optionalStop/Tail/TurnLights)
10-1003-592 65”Hx70”WCabrackincludes:10-5000window,2eachof10-5903lockingchainhangers,10-3800chaintraysand20-2401toolbox.Otheroptionsmaybeaddedtofityourneeds.
10-1003-5000 cab rack65”Hx70”WCabRackwithstandardwindowoption.WindowcanbeorderedonanyCabRackorDrom.
Space:Whenorderingawindowinstalledataspecificheight,pleasemeasurefromtopofthetruckframetomiddleofthewindow.Partnumber10-5005.
mounTing kiT 10-9401 with19”bolts10-9402 with22”bolts
FormountingPro-TechCabRacksandEnclosures
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk.
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 7TN: 800.525.7998
WA: 800.443.6153
options
cab rack wiTH locking cHain Hanger and recessed cHain TrayBasecabrackshownwithoptions
10-3315 Recessedchaintrayfillsspacebetweenuprightsandbelowcabrack. Holdschainsandincreasestrailerswingclearance.
10-5903 Lockingchainhangertosecurechainsandbinders(Chainsandbindersnotincluded)
cHain TraysChaintraysavailableinstandard8”,9”and12”depth,inwidthstofitanyapplications.Maybeshippedlooseforretrofitapplicationsorinstalledonnewcabracks.
locking cHain Hanger10-5903Upto14positionsavailable
air-acTuaTed overload sign brackeT10-4210Includeswoodsign.Yousupplyregulatedairsource(hoseandvalve)andsigncanberaisedorloweredfromthecabofyourtruck.
ligHTs/brackeTs10-4400 Roundsealedbeamloadlight10-4420 Ovalsealedbeamstop/tail/turnlights10-9000 Loadlightbracket(Note:loadlightNOTincluded)10-4450 BeaconLightBracket10-4425 Roundsealedbeamstop/tail/turnlights
10-445010-442510-9000
10-4400 10-4420 10-9000
Shownonaspace saver Cab rack.Exclusiveanglemountcabrack.Boltsdirectlytotruckframe.Providesupto6”moretrailerswingclearance.Greatformanyoftoday’struckswithshorterwheelbases!SpecifyI.D.angles.Weallow+1/2”toframewidthforrubberisolationspacers(included).
J-Hook mounTing kiT 10-9407FormountingPro-TechCabRacksandEnclosures.Usedforlimitedspace.
Warning:Foryoursafety,alwayscomplywithallcargosecurementrequirementsofTitle49CFRs.393etseq.
8 www.protech.net
enclosures
3 door modular enclosure10-1160 68”Hx86”Wx8”D10-1167 68”Hx86”Wx14”D
Chainhangerincludedineachoutsidecompartment.Stainlesst-locksandneoprenebulbsealkeepgeardryandsecure.Millfinishbody.Withinternaluprights.
enclosure cab rack10-1150 Enclosed68”Hx86”W10-1151 Enclosed68”Hx80”W
14”deepcompartmentsprovide37cubicfeetofstorage.Chainhangerincludedineachoutsidecompartment.EnclosedunitsavailablewithanyPro-Techdromorcabrack.Polishedbody.Stainlesst-locksandneoprenebulbsealkeepgeardryandsecure.
enclosure wiTH window10-1143 68”Hx86”W10-1153 68”Hx80”W
68”highx86”wideenclosurecabrackwithwindow!Three14”deepcompartmentswithstainlesst-latches.27”widex18”highwindowincreasesvisibilityofload.Polishedbody.Stainlesst-locksandneoprenebulbsealkeepgeardryandsecure.Chainhangerincludedineachoutsidecompartment.
cenTer enclosure10-1110 68”Hx86”W10-1013 68”Hx70”W10-1053 65”Hx70”W
Cabrackhas8½”deepcenterenclosure.Includestopshelfandchainhangerinstalledinsideofcompartment.Alsoavailablewithanglemountfeet.
available with diamond plate or smooth doors
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk.
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 9TN: 800.525.7998
WA: 800.443.6153
droms & bulkheads
10-140010-125510-5005
opTion To drom enclosure10-2000 68”Hx96”W10-2010 68”Hx86”W 14”deepencloseddromunitprovidesover50cubicfeetofstoragespace.Compartmentsaresealedwithneoprene,bulbtypeweathersealtokeepequipmentcleananddry.Stainlesssteel,keyedlatchesprovidesecurity.Chainhangerincludedineachsidecompartment.EnclosuresmaybeorderedwithanyPro-Techdromassembly.Customunitsarealsoavailable!
Pro-Techoriginalaluminumdromsiderailextrusionisdesignedtoallowcontinuoussplicefreesiderailsforsuperiorstrength.Insidelowerflangeacceptsflathooksonstrapsforquick,simpleloadtiedown.Outerflangesprovideprotectionformarkerlights,standardonallPro-Techdrom-cabracks.
10-140010-2000
convenTional drom configuraTion10-1255 68”Hx70”Wx30”L10-5005 Windowoption(Whenorderingawindowinstalledataspecificheight, pleasemeasurefromtopoftruckframetomiddleofwindow.)Thecabrackpanelis68”high.Thepanelanddeckare70”wide,andtheymatchthewidthofconventionalcabswithoutsleepers.Itgivesastreamlinedappearanceandreduceswindresistance.
10-5005 Windowoption(Whenorderingawindowinstalledataspecificheight, pleasemeasurefromtopoftruckframetomiddleofwindow.)
sTandard drom configuraTion
NOTE:Dromlengthismeasuredfromforward(cabside)ofcabrackuprights,toextremerear(fifthwheelside)ofdeck.
10-1250 68”Hx96”Wx30”L10-1400 68”Hx96”Wx4’L10-1600 68”Hx96”Wx6’L10-1800 68”Hx96”Wx8’L
10-1253 68”Hx86”Wx30”L10-1403 68”Hx86”Wx4’L10-1603 68”Hx86”Wx6’L10-1803 68”Hx86”Wx8’L
91” for 96” wide trailers97” for 102” wide trailers
Tarp Tie Bar
10” Turnbackor 24” Turnback
Channel Tie baron the inside
Side Kit and 2 x 4 acceptance channels
Tarp Bow Holes1 on 10” Turnback or
14 on 24” Turnback
Rounded cornersto protect tarps
bulkHeadsstandard features include:
• 2x4andSideKitAcceptanceChannels
• TarpTieBaronFront
• ChainTieBaronInside
• Pre-drilledforTarpBow
• RoundedTopTubeforLessWearonTarps
Customunitsarealsoavailableformostmakesoftrailers.
Callformoreinformation.
96” wide Trailer15-1210 10”Turnback15-1215 24”Turnback
102” wide Trailers15-1225 10”Turnback15-1230 24”Turnback
Warning:Foryoursafety,alwayscomplywithallcargosecurementrequirementsofTitle49CFRs.393etseq.
10 www.protech.net
fenders
Half Tandem, single radius
full Tandem, single radius
Half circle, single axle
Half circle, 20"w single axle
24.5"R
25" H
20" R40" L
18.75" H
30-7320 .105diamondplatealuminum30-7322 1/8”smoothpolishedaluminum30-7324 .090smoothaluminumw/ribs30-7324nr .090smoothaluminum,non-ribbed30-7327 14ga.polishedstainlesssteel30-7328 14ga.mildsteelw/ribs30-7328nr 14ga.mildsteel,non-ribbed
mounting kit(to mount two Half Tandem, Single Radius Fenders)30-7484 powdercoatedblack30-7484s stainlesssteel
30"F
54"L
24"H25.5"R
quarTer fender kiTs30-7319-27f Two27”stainlesssteelfendersplusbracketsandhardwareforPeterbiltAirLeafandLowAirLeafandFreightlinerAirLeafsuspension.(Also30-7319-30Fwithtwo30”fenders) 30-7319-27pTwo27”stainlesssteelfendersplusbracketsandhardwaretomountPeterbiltAirTracorAirRideapplications(Also30-7319-30Pwithtwo30”fenders)
30-7319-27kTwo27”stainlesssteelquarterfendersplusbracketsandhardwaretomountKenworthandother“clean-mount”applications.(Also30-7319-30Kwithtwo30”fenders)
kits also available with half tandem stainless fenders and associated mounting hardware.
30-7319-27F
30-7319-27P
30-7319-27K
30-7330 .105diamondplatealuminum30-7332 1/8”smoothpolishedaluminum30-7334 .090smoothaluminumw/ribs30-7334nr .090smoothaluminum,non-ribbed30-7337 14ga.polishedstainlesssteel30-7338 14ga.mildsteelw/ribs30-7338nr 14ga.mildsteel,non-ribbed
mounting kit(to mount two Full Tandem, Single Radius Fenders)30-7486 powdercoatedblack30-7486s stainlesssteel
30-7350 .105diamondplatealuminum30-7352 1/8”smoothpolishedaluminum30-7354 .090smoothaluminumw/ribs30-7354nr .090smoothaluminum,non-ribbed30-7357 14ga.polishedstainlesssteel30-7358 14ga.mildsteelw/ribs30-7358nr 14ga.mildsteel,non-ribbed
Also available in 20” wide for light truck and special applications:30-7150 .105diamondplatealuminum30-7152 1/8”smoothpolishedaluminum30-7157 14ga.polishedstainlesssteel
mounting kit(to mount two Half Circle, Single Axle Fenders)30-7482 powdercoatedblack30-7482s stainlesssteel
2”
25”
Typicalcrosssection,non-ribbed
FenDers Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty.
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 11TN: 800.525.7998
WA: 800.443.6153
fenders
full Tandem, double radiusfull radius, single axle
43"L22"R
17.5"H
please note: standard mounting kits may not fit every application.
lifT axle, single Tire30-7240 .105diamondplatealuminum30-7242 1/8”smoothpolishedaluminum30-7247 14ga.polishedstainlesssteel
Lift-axle,singletirefendersavailablein12”,14”and16”widths.
fender mounTing brackeTs 30-7395l or rUndersidemountingbracket,blackpowdercoatfinish,lefthandshown.Adjustablegalvanizedriserplate,stainlessbolts,rubberpadsandbackupplatesincluded.
30-7525 Undersidesinglestudcenterfendermountingbracket.Blackpowdercoatfinish,strong,easytomountandwillfiteitherrightorleftsideapplications.Adjustableriserplateandhardwareincluded.
30-7391sOuterFenderBracket(Alsoavailableinblackpowdercoatfinish)
30-7393sFenderMountingBracketdesignedforusewithPeterbiltAirTracsuspension.(Alsoavailableinblackpowdercoatfinish)
30-7394-50sUniversalAirLeafMountingBracketinpolishedstainlesssteel.DesignedtofitFreightlinerAirLeaforPeterbiltAirLeaforLowAirLeaf.Includesallnecessarywashersandspacersforanyapplicationabove.
30-7590FenderMountingBracket,singleboltwitha7391arm(alsoavailableinstainlesssteel).
30-7340 .105diamondplatealuminum30-7342 1/8”smoothpolishedaluminum30-7344 .090smoothaluminumw/ribs30-7344nr .090smoothaluminum,non-ribbed30-7347 14ga.polishedstainlesssteel30-7348 14ga.mildsteelw/ribs30-7348nr 14ga.mildsteel,non-ribbed
Alsoavailablein20”wideforlighttruckandspecialapplications30-7140 aluminumdiamondplate30-7142 smoothaluminum30-7147 stainlesssteel
mounting kit(to mount two Full Radius, Single Axle Fenders)30-7482 powdercoatedblack30-7482s stainlesssteel
30-7395L30-7525
Please specify width of fender.
105"L
25"W 25"W
1.75"7.125" 7.125"5.375" 5.375"
25.5"R
1.75"
24"H
30-7344
30-7360
30-7360 .105diamondplatealuminum30-7362 1/8”smoothpolishedaluminum30-7364 .090smoothaluminumw/ribs30-7364nr .090smoothaluminum,non-ribbed30-7367 14ga.polishedstainlesssteel30-7368 14ga.mildsteelw/ribs30-7368nr 14ga.mildsteel,non-ribbed
mounting kit(to mount two Full Tandem, Double Radius Fenders)30-7488 powdercoatedblack30-7488s stainlesssteel
Typicalcrosssection,ribbed
2”71/8” 53/8”
25”53/8” 71/8”
30-7393S
30-7394-50S
30-7391S
12.75"H±
37"L±
20"R
137.5°Ref
kits also available with half tandem stainless fenders and associated mounting hardware.
30-7590
12 www.protech.net
accessories
35-542035-5430
35-5440
35-5425
35-5400
35-5950
cHain Hangers 35-5975Lift&PivotLidChainHanger.Pivotinglidallowsaccesstochainsfromeithersidewithoutremovinglid.Perfectforapplicationswithlimitedclearanceabovechainhanger.
35-5962Nolid,lockablechainhanger.Withcenterlockbartosecurechains.Agreatlowercostoptionwherelimitedaccessisaconcern.
Tire cHain Hangers 35-5950Removablecover.Allowseasyaccessandsecurityfortirechains.Requireslessthan12”offramespace.
35-5951Hingedcover.Sameas35-5950,exceptcoverisattachedwithstainlesssteelhingetopreventloss/damageofcover.
aluminum diamond plaTe Hidden mounT deck covers* 35-54202’L35-54303’L35-54404’L35-54505’L35-54606’L35-54707’L35-54808’L35-54909’L35-549510’L
34”widealuminumdiamondplatedeckcoverswithstiffenersandmountinghardwareincluded.Alsoavailablewithoutstiffeners.
* Not for walking
aluminum grip sTruT deck cover**35-54252’L35-54353’L35-54454’L35-54555’L35-54656’L
34”widegripstrutdeckcover,selfdraining,4-waygrip,withmountinghardware.
aluminum graTe sTyle deck cover**35-54003’L
34”widealuminumgratestyledeckcover, selfdraining,4-waygrip,withmountinghardware.
35-5250 35-5260 35-5270
aluminum frame sTeps35-525012”W 35-526018”W 35-527024”W
Provideframeaccesswith4-waygripsteps.Universalmountforsimpleinstallationontruckframe.24”H.
35-5951
** Meets requirements for walk surface
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 13TN: 800.525.7998
WA: 800.443.6153
accessories
load lock carriers35-55092BarLoadLockerandBoot,verticalmount
35-55104BarLoadLockerandBoot,verticalmount
35-55142BarLoadLocker,horizontalmount35-55154BarLoadLocker,horizontalmount
Keepsloadbarsavailablewhenyouneedthem!Universalmountingfortractorortrailerinstallation.
aluminum ligHT barsframe mounted35-44702Holes@5¾”Hx12½”L35-44804Holes@5¾”Hx42¼”L35-44906Holes@5¾”Hx46½”L
35-5509
neoprene bulb-Type sealReplacementBulbSealisavailableintwostyles:endbulbandsidebulb.Theseautomotivequalitysealsfeatureareinforced,u-shapedattachmentpiecedesignedtofit1/8”thickmaterial.Toinstall,cutandpressontotheedgeoftheboxordoorframe.
90-491000 EndBulbSealNormallyapplieddirectlytotheedgeofaPro-Techbox.
90-491500 SideBulbSealUsedprimarilyonthedoorframeofaPro-Techaluminumbox.
lock rod
Replacementlockconnectionrodsareavailablein6-1/8”,7”,9”,9-1/8”,10”and36”lengths,andfeatureoneconicalendandoneenddrilledforboltconnection.
sTainless sTeel T-Handle locksReplacementT-locksshipcompletewithkeys,gasketandfourzincplatednutsforthreadedmalestudsonbackoflock.
90-461022m TopOpenLidT-Lock5-sidedt-handlelockwithlong,curvedlockcam.Foraluminumorsteeltop-openPro-Techboxes.
90-461015m DoubleSwing/DropDownDoorT-Lock 5-sidedt-handlelockwithshort,widelockcam.Foraluminumorsteeldouble-swingordrop-downdoorPro-Techboxes.
key cylindersKeycylindershaveaninternaldustcoverandcomecompletewithtwodoublebittedkeys.Theyaremarkedwitha“J”followedbyathreedigitnumber(i.e.,J209).Orderreplacementcylinders/keystomatchexistinglockswiththisnumber.
OldstyleEM/CH/XTcylindersarealsomarkedwithathree-digitnumericalsuffix (i.e.,EM-501).**Limitedavailability**
Note:Replacementkeysonlyarealsoavailable.Pleasespecifykeynumberasabove.
35-4480
35-4490
35-4470
90-491000end bulb seal
90-491500side bulb seal
double swing/drop-down door T-lock
Top openlid T-lock
90-461022m90-461015m
14 www.protech.net
custom
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk.
Someofthemorepopularcustomoptionsare:
• stainless steel doors
• custom Height, width, etc.
• adjustable shelf
• custom light configurations
• custom box configurations
as well as our line of standard products we specialize in custom jobs, which usually ship in 3-5 days upon receiving your signed approval.
Cab raCks & DrOMs Must be installeD with PrO-teCh MOunting kit anD Per instruCtiOns PrOviDeD. Failure tO DO sO will vOiD warranty anD seriOusly reDuCe lOaD rating OF Cab raCk. 15TN: 800.525.7998
WA: 800.443.6153
what’s new?
Warning:Foryoursafety,alwayscomplywithallcargosecurementrequirementsofTitle49CFRs.393etseq.
• 250# capacity drawer slides
• optional tray dividers on 3” centers
• removable drawers
• lightweight aluminum construction
• custom built to fit your needs
• easy six bolt installation
• positive lock-in drawers
◆ also available: 300# drawer slides with lock-in/lock-out capability
(drawers require tools to be removed)
Pro-Techhasaddedacustombuiltheavydutydrawerunittoourpopulardrawermoduleline.Thiscustomunitcanbeinstalledinyourtoolbox,servicebodyoranywhereelseyouwouldlikeandhasheavydutyaluminumconstructionforyearsoftroublefreeuse.
heavy duty custom drawer modules
• 68”T x 86”w x 14”d compartment
• Three roll-up shutters for easy access into the compartments
• Two shelves in center compartment
• one chain hanger in each outside compartment
• polished aluminum body
• variety of options available
10-1150 enclosure with optional roll-up shutters
www.protech.net
P.O. Box 933 • Vancouver, WA 98666 • 1.800.443.6153P.O. Box 700 • La Vergne, TN 37086 • 1.800.525.7998
www.protech.net • e-mail: [email protected]
© 2012 Pro-Tech Industries, Inc. all rights reserved. revised 4/12 • graphic Design: linea Forma
Pro-Tech manufactures products in two locations to serve you. Our extensive dealer network stocks our products for your ease of purchase. Custom products available and custom inquiries are welcome.
Please call to obtain more information on our complete line of pick-up truck accessories and flatbed bodies.