+ All Categories
Home > Documents > Standard Drawing Index “V” Sheetsdot.alaska.gov/nreg/precon/Standard-Drawings/_READ... · All...

Standard Drawing Index “V” Sheetsdot.alaska.gov/nreg/precon/Standard-Drawings/_READ... · All...

Date post: 29-Sep-2020
Category:
Upload: others
View: 0 times
Download: 0 times
Share this document with a friend
2
From: Powers, Steven S (DOT) To: Abutrab, Anthony A (DOT) ; Ackiss, Colleen M (DOT) ; Allen, Jake (DOT) ; Angell, Rebecca R H (DOT) ; Arvey, David M (DOT) ; Baxter- Mcintosh, Jill (DOT) ; Beck, Albert M L (DOT) ; Benjamin, Thomas A (DOT) ; Bennett, John D (DOT) ; Berggren, Michael J (DOT) ; Bergstrom, Thorwald J (DOT) ; Biggane, Judith M (DOT) ; Boles, Luke J (DOT) ; Boyd, Venna Z (DOT) ; Bray, Melanie L (DOT) ; Brehm, Nicholas C (DOT) ; Brooks, Steven Michael (DOT) ; Brunner, Erik S (DOT) ; Brunner, Mary E (DOT) ; Carey, Maureen J (DOT) ; Carlson, Sam T (DOT) ; Carter, Garrett D (DOT) ; Chang, Kailing (DOT) ; Courtright, Cheryl A (DOT) ; Davis, Duane M (DOT) ; Demattio, Cristina M (DOT) ; Durfee, Larry S (DOT) ; Eckman, Paul P (DOT) ; Fischer, David K (DOT) ; Foster, Hui Ping (DOT) ; French, Blair (DOT) ; Golden, Pamela K (DOT) ; Graetz, Ethan E (DOT) ; Griffin, Guan (DOT) ; Haddix, Loren H (DOT) ; Hall, Ivet (DOT) ; Heim, Carl F (DOT) ; Hicks, Troy M (DOT) ; Hill, Jason J (DOT) ; Hooper, Barry L (DOT) ; Hughes, Thomas C (DOT) ; Hutchinson, Jonathan J (DOT) ; Jensen, David D (DOT) ; Jensen, Melissa L (DOT) ; Johnson, Russell M (DOT) ; Johnston, Christopher F (DOT) ; Karczmarczyk, Paul F (DOT) ; Kelley, Kathleen A (DOT) ; Kemp, Joseph (DOT) ; Kim, Joseph H (DOT) ; Kromrey, Lindsey L (DOT) ; Kruse, Eric R (DOT) ; Kulash, William M (DOT) ; Little, Lauren M (DOT) ; Lund, Michael C (DOT) ; Martin, Kerri L (DOT) ; Maybrier, Scott L (DOT) ; McKinney, Holly Jean (DOT) ; Miller, Brian A (DOT) ; Miller- Chapman, Elizabeth (DOT) ([email protected]) ; Nelson, Brett D (DOT) ; Netardus, John J (DOT) ; Organek, Jeff C (DOT) ; Pasilan, Emesjoy V (DOT) ; Phillips, Daniel A (DOT) ; Powers, Steven S (DOT) ; Rahlfs, Jacob L (DOT) ; Sample, Laura Angelica (DOT) ; Sastamoinen, Shawna (DOT) ; Sayman, Irvin R (DOT) ; Schacher, Sarah E (DOT) ; Schlichting, Sarah J (DOT) ; Skinner, Alan F (DOT) ; Sprout, Timothy L (DOT) ; Stephan, Nathan J (DOT) ; Stutzke, Jeff P (DOT) ; Tanner, Barbara L (DOT) ; Tomasic, Tadeusz C (DOT) ; Walleri, Heather L (DOT) ; Woods, Marsha S (DOT) ; Wright, Jennifer J (DOT) ; Yang, Addison J (DOT) ; Young, Rex E (DOT) Subject: Standard Drawings for use in the Northern Region Date: Tuesday, June 4, 2019 5:26:00 PM Attachments: image002.png Standard Dwgs 19-01.pdf _NR_Standard_Drawing_Index_June-4-2019.pdf _StandardDwgsExample.pdf Some of the Standard Drawings for use in the Northern Region have been updated and a few have been added. In the Northern Region we are still operating under the attached Directive 19-01. Sarah Schacher wanted me to include the following: From Sarah: The reason we are still using NR Design Directive 19-01 is because Standard Plan Development Reports (SPDRs) are not yet available.  SPDRs are the vehicle by which registrants (licensed engineers) will be able to take responsible charge for the application of a Standard Plan on any given project (see Chief Engineer’s Directive dated January 25, 2019 ).  As soon as SPDRs are available, we will follow the Chief Engineer’s directive for those Standard Plans and not follow NR Design Directive 19-01. We will keep you informed with any updates to this. Joe Kemp is NR’s contact on the status/schedule of individual Standard Plan updates. As noted in the Directive, the drawings are in the following directory: H:\CAD\MTR\STD\NR (\\dotfpgnas\precon\CAD\MTR\STD\NR ) I have attached a Northern Region Standard Drawing Index . This index explains why not all of the Statewide “Standard Plans” are available as Standard Drawings and includes other information. This index will be kept up to date in the above directory. There is also a H:\CAD\MTR\STD\_READ THIS FIRST directory which contains the Directive and other information explaining the Northern Region policy. Standard Drawings are to be include in the plan set as “V” Sheets . The “Standard Drawing(s)” wording is important to agree with the Specifications. The title on the sheets should read “STANDARD DRAWING X-00.00”. This title is a field which is modified using the sheet set. I have attached an example to show the Index of Sheets and a Standard Drawing sheet.
Transcript
  • From: Powers, Steven S (DOT)To: Abutrab, Anthony A (DOT); Ackiss, Colleen M (DOT); Allen, Jake (DOT); Angell, Rebecca R H (DOT); Arvey, David M (DOT); Baxter-

    Mcintosh, Jill (DOT); Beck, Albert M L (DOT); Benjamin, Thomas A (DOT); Bennett, John D (DOT); Berggren, Michael J (DOT); Bergstrom,Thorwald J (DOT); Biggane, Judith M (DOT); Boles, Luke J (DOT); Boyd, Venna Z (DOT); Bray, Melanie L (DOT); Brehm, Nicholas C(DOT); Brooks, Steven Michael (DOT); Brunner, Erik S (DOT); Brunner, Mary E (DOT); Carey, Maureen J (DOT); Carlson, Sam T (DOT);Carter, Garrett D (DOT); Chang, Kailing (DOT); Courtright, Cheryl A (DOT); Davis, Duane M (DOT); Demattio, Cristina M (DOT); Durfee,Larry S (DOT); Eckman, Paul P (DOT); Fischer, David K (DOT); Foster, Hui Ping (DOT); French, Blair (DOT); Golden, Pamela K (DOT);Graetz, Ethan E (DOT); Griffin, Guan (DOT); Haddix, Loren H (DOT); Hall, Ivet (DOT); Heim, Carl F (DOT); Hicks, Troy M (DOT); Hill,Jason J (DOT); Hooper, Barry L (DOT); Hughes, Thomas C (DOT); Hutchinson, Jonathan J (DOT); Jensen, David D (DOT); Jensen,Melissa L (DOT); Johnson, Russell M (DOT); Johnston, Christopher F (DOT); Karczmarczyk, Paul F (DOT); Kelley, Kathleen A (DOT);Kemp, Joseph (DOT); Kim, Joseph H (DOT); Kromrey, Lindsey L (DOT); Kruse, Eric R (DOT); Kulash, William M (DOT); Little, Lauren M(DOT); Lund, Michael C (DOT); Martin, Kerri L (DOT); Maybrier, Scott L (DOT); McKinney, Holly Jean (DOT); Miller, Brian A (DOT); Miller-Chapman, Elizabeth (DOT) ([email protected]); Nelson, Brett D (DOT); Netardus, John J (DOT); Organek, Jeff C (DOT);Pasilan, Emesjoy V (DOT); Phillips, Daniel A (DOT); Powers, Steven S (DOT); Rahlfs, Jacob L (DOT); Sample, Laura Angelica (DOT);Sastamoinen, Shawna (DOT); Sayman, Irvin R (DOT); Schacher, Sarah E (DOT); Schlichting, Sarah J (DOT); Skinner, Alan F (DOT);Sprout, Timothy L (DOT); Stephan, Nathan J (DOT); Stutzke, Jeff P (DOT); Tanner, Barbara L (DOT); Tomasic, Tadeusz C (DOT); Walleri,Heather L (DOT); Woods, Marsha S (DOT); Wright, Jennifer J (DOT); Yang, Addison J (DOT); Young, Rex E (DOT)

    Subject: Standard Drawings for use in the Northern RegionDate: Tuesday, June 4, 2019 5:26:00 PMAttachments: image002.png

    Standard Dwgs 19-01.pdf_NR_Standard_Drawing_Index_June-4-2019.pdf_StandardDwgsExample.pdf

    Some of the Standard Drawings for use in the Northern Region have been updated and a few have been added.

    In the Northern Region we are still operating under the attached Directive 19-01.

    Sarah Schacher wanted me to include the following:

    From Sarah:

    The reason we are still using NR Design Directive 19-01 is because Standard Plan Development Reports (SPDRs)are not yet available.  SPDRs are the vehicle by which registrants (licensed engineers) will be able to takeresponsible charge for the application of a Standard Plan on any given project (see Chief Engineer’s Directivedated January 25, 2019).  As soon as SPDRs are available, we will follow the Chief Engineer’s directive for thoseStandard Plans and not follow NR Design Directive 19-01. 

    We will keep you informed with any updates to this. Joe Kemp is NR’s contact on the status/schedule ofindividual Standard Plan updates.

    As noted in the Directive, the drawings are in the following directory:H:\CAD\MTR\STD\NR (\\dotfpgnas\precon\CAD\MTR\STD\NR)

    I have attached a Northern Region Standard Drawing Index. This index explains why not all of the Statewide“Standard Plans” are available as Standard Drawings and includes other information. This index will be kept up to datein the above directory.

    There is also a H:\CAD\MTR\STD\_READ THIS FIRST directory which contains the Directive and other informationexplaining the Northern Region policy.

    Standard Drawings are to be include in the plan set as “V” Sheets. The “Standard Drawing(s)” wording is important toagree with the Specifications. The title on the sheets should read “STANDARD DRAWING X-00.00”. This title is a fieldwhich is modified using the sheet set. I have attached an example to show the Index of Sheets and a Standard Drawingsheet.

    mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]://dot.alaska.gov/stwddes/dcspubs/assets/pdf/directives/2019/012519_standard_drawings.pdfhttp://dot.alaska.gov/stwddes/dcspubs/assets/pdf/directives/2019/012519_standard_drawings.pdffile:////dotfpgnas/Precon/CAD/MTR/STD/NRfile:////dotfpgnas/precon/CAD/MTR/STD/NRfile:////dotfpgnas/Precon/CAD/MTR/STD/_READ%20THIS%20FIRST

  • “Keep Alaska Moving through service and infrastructure.”

    MEMORANDUM State of Alaska Department of Transportation & Public Facilities

    Northern Region Design and Engineering Services

    TO: Distribution DATE: December 7, 2018 FILE: H:\Preconstruction\Preconstruction Engineer\NR Design Directives\2019\Standard Dwgs 19-01.pdf PHONE NO: 451-5361 FROM: Sarah E. Schacher, P.E.

    Preconstruction Engineer Northern Region

    SUBJECT: Use of Standard Drawings in Advertised Plans NR Design Directive 19-01

    Effective immediately, projects advertised in Northern Region will no longer incorporate Standard Drawings sealed for repetitive use, nor will we include Standard Drawings as an appendix to the specifications.

    • Standard Drawings that are suitable for a project and that meet the Department’s design standards are to be sealed and included in the plans without modification. Retain the title of the standard drawings that are included in the plans so that cross-references within specifications and other plan sheets remain correct. CAD details for these drawings are located on our server at H:\CAD\MTR\STD\NR

    • Standard Drawings that are not suitable for a project or that do not meet the Department’s design standards are to modified and included in the plans and sealed as project specific details. If the project manager or designer are unable to seal a suitable Standard Drawing or modified project specific detail, the project manager is responsible to find a registrant who is, either elsewhere in the Department or through a consultant contract.

    While this is a significant change from past practice, our perspective on the importance of standardization has not changed. Use Standard Drawings rather than project specific details unless the Standard Drawing is not suitable for the project or does not meet the Department’s design standards. The Final PS&E and Revised Final PS&E transmittal memos will be modified to track the impact of this change. At the time of any Final and/or Revised Final PS&E submittal, design managers will document the approximate cost and schedule impacts associated with this change in practice. Distribution by email: NR DOT&PF Design Personnel NR DOT&PF Construction Personnel Dan Adamczak, P.E., Maintenance Engineer Ryan F. Anderson, P.E., Regional Director Ken Fisher, P.E., Chief Engineer Michael Dean, P.E., Division of Facilities Services Lauren Staft, P.E., Division of Facilities Services RJ Stumpf, P.E., Airport Engineer, Fairbanks International Airport

    December 7, 2018

    Use of Standard Drawings in Advertised Plans

  • NORTHERN REGION STANDARD DRAWING INDEX Effective June 4, 2019

    Alaska Standard Plans Manual i Index

    BRIDGES AND STRUCTURES PAGES

    B-08.00 Bin Walls (Not used) 1

    CONSTRUCTION-BARRICADES AND SIGNING

    C-04.12 Location of Double Traffic Fine Signs (Typically Not Used in NR – See note on sheet)

    1

    C-05.20 Interim Pavement Markings 1

    DRAINAGE-CULVERTS AND SEWERS

    D-01.02 Culvert Pipe & Arch Installation Details 1 D-04.21 Pipe And Arch Tables (Aluminum Pipe) 1 of 4 D-04.21 Pipe and Arch Tables (Steel Pipe) 2 of 4 D-04.21 Pipe and Arch Tables (Plastic Pipe) 3 of 4 D-04.21 Pipe and Arch Tables (Spiral Rib Pipe) 4 of 4 D-06.10 Culvert End Sections 3 D-07.00 Culvert Bevels 1 D-09.00 Culvert Marker Post (Not used in NR) 1 D-11.01 Culvert Circulating Thaw Pipe(Not used in NR) 1 D-13.10 Culvert Thaw Wire Installation(Not used in NR) 2 D-14.10 Remote Thaw Wire Installation(Not used in NR) 1 D-20.05 Manholes, Frame and Cover 1 D-22.01 Stormdrain Manhole Frame and Grate Details 1 D-23.01 Curb Inlet Box, Frame & Grate 1 D-24.00 Inlet Frames and Grates 1 D-25.00 High Capacity Curb Inlet Box Frame and Grate 1 of 2 D-25.00 High Capacity Inlet Frames and Grate (Field and Gutter Inlets) 2 of 2 D-26.04 Type “A” Inlet Boxes 1 D-30.11 Headwalls – Cast-in-Place – Type I 1 of 2 D-30.11 Headwalls – Cast-in-Place – Type II 2 of 2 D-31.01 Headwalls – Precast – Type I 1 of 2 D-31.01 Headwalls – Precast – Type II 2 of 2 D-42.12 Type “C” Inlet Box, 18 Inch Pipe on 4:1 Slope 1 D-43.12 Type “D” Outlet Box, 18 Inch Pipe on 4:1 Slope 1 D-44.12 Type “C” Inlet Box, 24 Inch Pipe on 4:1 Slope 1 D-45.12 Type “D” Outlet Box, 24 Inch Pipe on 4:1 Slope 1

    EROSION AND LANDSCAPING

    E-09.00 Slope Rounding and Warping (Not used in NR) 1

  • NORTHERN REGION STANDARD DRAWING INDEX Effective June 4, 2019

    Index ii Alaska Standard Plans Manual

    FENCES AND GATES PAGES

    F-01.03 Chain Link Fence 1 F-03.02 Chain Link Fence Gate 1 F-04.02 Woven Wire Fence 1 F-05.12 Woven Wire Fence with Barbed Wire 1

    GUARDRAIL, MEDIAN BARRIERS & CRASH CUSHIONS

    G-00.04 Standard Guardrail Hardware (Nuts, Bolts, and Washers) 1 of 5 G-00.04 Standard Guardrail Hardware (Rail and Splices) 2 of 5 G-00.04 Standard Guardrail Hardware (Terminal Connectors) 3 of 5 G-00.04 Standard Guardrail Hardware (Miscellaneous) 4 of 5 G-00.04 Standard Guardrail Hardware (Flexible Delineators) 5 of 5 G-01.02 G1S Cable Guardrail 1 G-03.03 G3S Box Beam Guardrail 1 G-05.11S Steel Post W31 Guardrail 1 G-05.11W Wood Post W31 Guardrail (We don’t use wood posts in NR) 1 G-09.04S Steel Post Modified Thrie-Beam Guardrail 1 G-09.04W Wood Post Thrie-Beam Guardrail (We don’t use wood posts in NR & Mod.

    Thrie-Beam performs better) 1

    G-10.20 Guardrail Post Installation 1 G-11.00 W31 Guardrail Transition Details 1 G-14.00 W31 Downstream End Anchor 2 G-16.00 W31 Guardrail Buried-In-Backslope Terminal 4 G-20.12 Widening for Guardrail End Terminals 1 G-26.00 W31 Short Radius Guardrail 3 G-29.00 Long Span W31 Guardrail 1 G-30.01 Bridge Rail W-Beam Transition 1 G-31.01 Bridge Rail Thrie Beam Transition 1 G-46.12 Precast Concrete “F” Shape Barrier 1 of 2 G-46.12 Precast Concrete “F” Shape Barrier – Tapered End Section 2 of 2

    INTERSECTIONS, APPROACHES & PAVEMENT DESIGN

    I-20.20 Curb Cut, Curb and Gutter and Curb Ramp Details 1 I-21.11 Parallel Curb Ramp 1 I-22.11 Perpendicular Curb Ramp 1 I-30.10 Accessible Parking 1 I-81.00 Superelevation Transition 1

    LUMINAIRES AND LIGHTING STANDARDS L-03.10 Lighting Standards 1 L-23.01 Junction Boxes for Electrolier 1 L-24.00 Type 1 Load Center 2 L-26.00 Type 2 and 3 Load Centers 1

  • NORTHERN REGION STANDARD DRAWING INDEX Effective June 4, 2019

    Alaska Standard Plans Manual iii Index

    MISCELLANEOUS PAGES

    M-13.01 Survey Monument 1 M-16.01 Brass Cap Monument and Monument Case 1 M-20.14 Mailbox Location 1 M-23.12 Mailbox Installation 1 of 2 M-23.12 Mailbox Mounting and Anchoring Details 2 of 2 M-24.01 Cable Safety Rail 1

    SIGN AND SIGN SUPPORTS

    S-00.11 Sign Framing and Post Spacing 1 S-01.01 Bracing for Signs Mounted on Single Post 1 S-05.01 Post Mounted Sign Offset and Height 1 S-20.10 Sign to Sign Post Connections (Instead use appropriate details from

    Traffic Safety Masters (TSM’s) 400, 403, 420, 421, and 422) 1

    S-23.00 Pole and Mastarm Sign Mounting (Instead use appropriate details from TSM’s 403, 404 and/or 408A)

    1

    S-30.04 Light Sign Structure Post Embedment 1 S-31.01 Sign Post Base and Foundation 1 S-32.00 Sign Post Base and Foundation Behind Barrier 1 S-52.01 Overhead Sign Mounting (Not used) 1

    TRAFFIC CONTROL

    T-05.10 Guide Marker Placement 1 T-06.00 Recessed Pavement Markers 1 T-20.04 Pavement Marking Applications 1 T-21.03 Pavement Marking Applications 1 T-22.04 Pavement Marking Symbol Dimensions 1 T-23.00 Crosswalk Location at Intersections 1 T-25.00 Milled Rumble Strips (use TSM 112 and/or 113) details to be added 3 T-30.11 Traffic Signal Hardware 2 T-31.00 Traffic Signal and Accessories Foundation 1 T-32.10 Loop Detector Installation 1 T-34.01 Junction Boxes for Traffic Signals 1 T-35.00 Controller Cabinet Foundation 1 T-40.00 Slip Base for Post Mounted Traffic Signals (Not used in NR) 1

    UTILITIES

    U-03.01 Thrust Blocks (Typically detail in utilities plans) 1

    BRIDGES AND STRUCTURES PAGES

    B08.00

    CONSTRUCTION-BARRICADES AND SIGNING

    C04.12

    C05.20

    DRAINAGE-CULVERTS AND SEWERS

    D01.02

    D04.21

    D04.21

    D04.21

    D04.21

    D06.10

    D07.00

    D09.00

    D11.01

    D13.10

    D14.10

    D20.05

    D22.01

    D23.01

    D24.00

    D25.00

    D25.00

    D26.04

    D-30.11

    D-30.11

    D-31.01

    D-31.01

    D42.12

    D43.12

    D44.12

    D45.12

    EROSION AND LANDSCAPING

    E09.00

    FENCES AND GATES PAGES

    F01.03

    F03.02

    F04.02

    F05.12

    GUARDRAIL, MEDIAN BARRIERS & CRASH CUSHIONS

    G00.04

    G00.04

    G00.04

    G00.04

    G00.04

    G01.02

    G03.03

    G09.04S

    G-09.04W

    G-10.20

    G-11.00

    G-14.00

    G16.00

    G20.12

    G-26.00

    G29.00

    G-30.01

    G-31.01

    G-46.12

    G-46.12

    INTERSECTIONS, APPROACHES & PAVEMENT DESIGN

    I20.20

    I-21.11

    I-22.11

    I30.10

    I81.00

    LUMINAIRES AND LIGHTING STANDARDS

    L03.10

    L23.01

    L24.00

    L26.00

    MISCELLANEOUS PAGES

    M13.01

    M16.01

    M20.14

    M23.12

    M23.12

    M24.01

    SIGN AND SIGN SUPPORTS

    S00.11

    S01.01

    S05.01

    S20.10

    S23.00

    S30.04

    S31.01

    S32.00

    S52.01

    TRAFFIC CONTROL

    T05.10

    T-06.00

    T20.04

    T21.03

    T22.04

    T-23.00

    T-25.00

    T30.11

    T31.00

    T32.10

    T34.01

    T35.00

    T40.00

    UTILITIES

    U03.01

  • AutoCAD SHX Text

    PUBLIC FACILITIES

    AutoCAD SHX Text

    &

    AutoCAD SHX Text

    DEPARTMENT OF TRANSPORTATION

    AutoCAD SHX Text

    STATE OF ALASKA

    AutoCAD SHX Text

    FEDERAL NO.

    AutoCAD SHX Text

    STATE NO.

    AutoCAD SHX Text

    DESIGN DESIGNATIONS

    AutoCAD SHX Text

    ADT (2012)

    AutoCAD SHX Text

    ADT (2035)

    AutoCAD SHX Text

    DHV (??%)

    AutoCAD SHX Text

    PERCENT TRUCKS (T)

    AutoCAD SHX Text

    ?%

    AutoCAD SHX Text

    DIRECTIONAL SPLIT (D)

    AutoCAD SHX Text

    ??/??

    AutoCAD SHX Text

    DESIGN SPEED (V)

    AutoCAD SHX Text

    ?? MPH

    AutoCAD SHX Text

    DESIGN EAL'S (?? YEARS)

    AutoCAD SHX Text

    PROJECT SUMMARY

    AutoCAD SHX Text

    WIDTH OF PAVEMENT

    AutoCAD SHX Text

    LENGTH OF GRADING

    AutoCAD SHX Text

    LENGTH OF PAVING

    AutoCAD SHX Text

    LENGTH OF PROJECT

    AutoCAD SHX Text

    PROPOSED HIGHWAY PROJECT

    AutoCAD SHX Text

    PUBLIC FACILITIES

    AutoCAD SHX Text

    &

    AutoCAD SHX Text

    DEPARTMENT OF TRANSPORTATION

    AutoCAD SHX Text

    STATE OF ALASKA

    AutoCAD SHX Text

    INDEX OF SHEETS

    AutoCAD SHX Text

    SHEET NO.

    AutoCAD SHX Text

    DESCRIPTION

    AutoCAD SHX Text

    A1

    AutoCAD SHX Text

    TITLE SHEET

    AutoCAD SHX Text

    A2-A?

    AutoCAD SHX Text

    LEGEND & SHEET LAYOUT INDEX

    AutoCAD SHX Text

    B1-B?

    AutoCAD SHX Text

    TYPICAL SECTIONS

    AutoCAD SHX Text

    C1-C?

    AutoCAD SHX Text

    ESTIMATE OF QUANTITIES & GENERAL NOTES

    AutoCAD SHX Text

    D1-D?

    AutoCAD SHX Text

    SUMMARIES

    AutoCAD SHX Text

    E1-E?

    AutoCAD SHX Text

    CULVERT/DRAINAGE DETAILS & SUMMARY

    AutoCAD SHX Text

    E?-E?

    AutoCAD SHX Text

    MISCELLANEOUS DETAILS

    AutoCAD SHX Text

    F1-F?

    AutoCAD SHX Text

    PLAN & PROFILE

    AutoCAD SHX Text

    G1-G?

    AutoCAD SHX Text

    APPROACH SUMMARY & DETAILS

    AutoCAD SHX Text

    G?-G?

    AutoCAD SHX Text

    INTERSECTION LAYOUT & GRADING SHEETS

    AutoCAD SHX Text

    H1-H?

    AutoCAD SHX Text

    SIGNING & STRIPING

    AutoCAD SHX Text

    H?-H?

    AutoCAD SHX Text

    ILLUMINATION & TRAFFIC SIGNAL PLANS

    AutoCAD SHX Text

    K1-K?

    AutoCAD SHX Text

    AUTOMATED TRAFFIC RECORDER (ATR)

    AutoCAD SHX Text

    L1-L?

    AutoCAD SHX Text

    LANDSCAPING

    AutoCAD SHX Text

    M1-M?

    AutoCAD SHX Text

    RETAINING WALLS

    AutoCAD SHX Text

    N1-N?

    AutoCAD SHX Text

    BRIDGE PLANS

    AutoCAD SHX Text

    Q1-Q?

    AutoCAD SHX Text

    EROSION SEDIMENT CONTROL PLANS

    AutoCAD SHX Text

    S1-S?

    AutoCAD SHX Text

    CONSTRUCTION PHASING PLANS

    AutoCAD SHX Text

    T1-T?

    AutoCAD SHX Text

    TRAFFIC CONTROL PLANS (and/or DEVICES)

    AutoCAD SHX Text

    U1-U?

    AutoCAD SHX Text

    UTILITIES PLANS

    AutoCAD SHX Text

    V1-V13

    AutoCAD SHX Text

    STANDARD DRAWINGS

    AutoCAD SHX Text

    COLDFOOT

    AutoCAD SHX Text

    VALDEZ

    AutoCAD SHX Text

    NENANA

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    160

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    150

    AutoCAD SHX Text

    BETHEL

    AutoCAD SHX Text

    DILLINGHAM

    AutoCAD SHX Text

    60

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    ANCHORAGE

    AutoCAD SHX Text

    RUBY

    AutoCAD SHX Text

    NOME

    AutoCAD SHX Text

    70

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    TANANA

    AutoCAD SHX Text

    UMIAT

    AutoCAD SHX Text

    UTQIAGVIK

    AutoCAD SHX Text

    170

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    160

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    150

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    FAIRBANKS

    AutoCAD SHX Text

    EAGLE

    AutoCAD SHX Text

    140

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    DAWSON Y.T.

    AutoCAD SHX Text

    JUNEAU

    AutoCAD SHX Text

    130

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    60%%D

    AutoCAD SHX Text

    CIRCLE

    AutoCAD SHX Text

    PRUDHOE BAY

    AutoCAD SHX Text

    DEADHORSE

    AutoCAD SHX Text

    140

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    130

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    120

    AutoCAD SHX Text

    %%d

    AutoCAD SHX Text

    %%ULOCATION MAP

    AutoCAD SHX Text

    PROJECT LOCATION

    AutoCAD SHX Text

    ALASKA

    AutoCAD SHX Text

    STATE

    AutoCAD SHX Text

    YEAR

    AutoCAD SHX Text

    PROJECT DESIGNATION

    AutoCAD SHX Text

    CDS ROUTE:

    AutoCAD SHX Text

    MILEPOINT:

    AutoCAD SHX Text

    TO

    AutoCAD SHX Text

    APPROVED BY:

    AutoCAD SHX Text

    Sarah E. Schacher, P.E.

    AutoCAD SHX Text

    DATE

    AutoCAD SHX Text

    Preconstruction Engineer, Northern Region

    AutoCAD SHX Text

    Ryan F. Anderson, P.E.

    AutoCAD SHX Text

    DATE

    AutoCAD SHX Text

    Regional Director, Northern Region

    AutoCAD SHX Text

    STATE OF ALASKA

    AutoCAD SHX Text

    DEPARTMENT OF TRANSPORTATION

    AutoCAD SHX Text

    &

    AutoCAD SHX Text

    PUBLIC FACILITIES

    AutoCAD SHX Text

    ACCEPTED FOR CONSTRUCTION:

    AutoCAD SHX Text

    SHEET NO.

    AutoCAD SHX Text

    TOTAL SHEETS

    AutoCAD SHX Text

    ??????

    AutoCAD SHX Text

    ???.??

    AutoCAD SHX Text

    ???.??

    AutoCAD SHX Text

    FED#/STATE#

    AutoCAD SHX Text

    2019

    AutoCAD SHX Text

    A1

    AutoCAD SHX Text

    75

    AutoCAD SHX Text

    GRADING, DRAINAGE, PAVING, BRIDGE(S), ILLUMINATION & SIGNALIZATION

    AutoCAD SHX Text

    ENGINEER NAME, P.E., PROJECT MANAGER NAME, P.E., DESIGN ENGINEER or DESIGNER if not P.E.

    AutoCAD SHX Text

    REVISION

    AutoCAD SHX Text

    DATE

    AutoCAD SHX Text

    NO.

    AutoCAD SHX Text

    NOTE:The names listed on the title sheet shall be DOT The names listed on the title sheet shall be DOT only. Consultant projects will typically only have the DOT Project Manager's name listed. However if another person within DOT was heavily involved and will be a contact to answer questions, their name can be listed as DOT DESIGNER. For projects designed in-house, both names will be listed. If the lead designer is a Registered Professional Engineer the title will be DESIGN ENGINEER; if not the title will be DESIGNER. Only the Project Manager and Lead Designer shall be listed. There should not be any seals on the title sheet.

    AutoCAD SHX Text

    NOTE: Federal number first, then state Federal number first, then state number. This is true for all the project designations in the sheet set.

    AutoCAD SHX Text

    HWYS TITLE SHEET

    sspowers

    Rectangle

  • NIGN

    R

    DERE

    SIGE

    TSP OR SEF

    ELANIO

    REE

    --------

    AutoCAD SHX Text

    STANDARD DRAWING T-20.04

    AutoCAD SHX Text

    ALASKA

    AutoCAD SHX Text

    STATE

    AutoCAD SHX Text

    YEAR

    AutoCAD SHX Text

    PROJECT DESIGNATION

    AutoCAD SHX Text

    SHEET NO.

    AutoCAD SHX Text

    TOTAL SHEETS

    AutoCAD SHX Text

    FED#/STATE#

    AutoCAD SHX Text

    2019

    AutoCAD SHX Text

    V10

    AutoCAD SHX Text

    V13

    AutoCAD SHX Text

    K

    AutoCAD SHX Text

    49

    AutoCAD SHX Text

    E

    AutoCAD SHX Text

    S

    AutoCAD SHX Text

    T

    AutoCAD SHX Text

    T

    AutoCAD SHX Text

    A

    AutoCAD SHX Text

    TH

    AutoCAD SHX Text

    A

    AutoCAD SHX Text

    O

    AutoCAD SHX Text

    F

    AutoCAD SHX Text

    L

    AutoCAD SHX Text

    A

    AutoCAD SHX Text

    S

    AutoCAD SHX Text

    A

    AutoCAD SHX Text

    PLANS DEVELOPED BY: STATE OF ALASKA DEPARTMENT OF TRANSPORTATION & PUBLIC FACILITIES, NORTHERN REGION, 2301 PEGER ROAD, FAIRBANKS, AK 99709 (907)451-2200

    AutoCAD SHX Text

    REVISION

    AutoCAD SHX Text

    DATE

    AutoCAD SHX Text

    NO.

    AutoCAD SHX Text

    GENERAL NOTES:

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    Paint Curb Yellow

    AutoCAD SHX Text

    on top and face

    AutoCAD SHX Text

    12'

    AutoCAD SHX Text

    1'-6"

    AutoCAD SHX Text

    Solid

    AutoCAD SHX Text

    Yellow

    AutoCAD SHX Text

    4" Solid Yellow

    AutoCAD SHX Text

    45%%d Typ.

    AutoCAD SHX Text

    4" Solid Yellow

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "D"

    AutoCAD SHX Text

    Raised Median, etc.

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    "D"

    AutoCAD SHX Text

    2D, min.

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    FOUR OR MORE LANES

    AutoCAD SHX Text

    DRIVE TO RIGHT

    AutoCAD SHX Text

    TWO LANES

    AutoCAD SHX Text

    DRIVE TO RIGHT

    AutoCAD SHX Text

    White longitudinal and diagonal

    AutoCAD SHX Text

    markers identical to Four Lane

    AutoCAD SHX Text

    Arrangement.

    AutoCAD SHX Text

    Center of Island

    AutoCAD SHX Text

    Paint curb yellow on top and face

    AutoCAD SHX Text

    (all curb and channelizing islands)

    AutoCAD SHX Text

    Edge of driving lane

    AutoCAD SHX Text

    P.C

    AutoCAD SHX Text

    Lane Line

    AutoCAD SHX Text

    4"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    8" Solid White

    AutoCAD SHX Text

    45%%d

    AutoCAD SHX Text

    45%%d

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    "S"

    AutoCAD SHX Text

    7'

    AutoCAD SHX Text

    1'-6"

    AutoCAD SHX Text

    CHANNELIZING ISLAND

    AutoCAD SHX Text

    NOTES:

    AutoCAD SHX Text

    "D" = Speed limit (mph) X "S" (offset width in feet)

    AutoCAD SHX Text

    or as indicated on the plans. Minimum "D" = 100 feet

    AutoCAD SHX Text

    urban, 200 feet rural.

    AutoCAD SHX Text

    "D"

    AutoCAD SHX Text

    12' or less

    AutoCAD SHX Text

    End barrier line

    AutoCAD SHX Text

    End edge line in

    AutoCAD SHX Text

    line with obstruction

    AutoCAD SHX Text

    12'

    AutoCAD SHX Text

    12'

    AutoCAD SHX Text

    Broken Yellow

    AutoCAD SHX Text

    Edge of paved shoulder

    AutoCAD SHX Text

    (edge lines not carried

    AutoCAD SHX Text

    across any bridge)

    AutoCAD SHX Text

    4" Solid yellow barrier line

    AutoCAD SHX Text

    (500 foot length)

    AutoCAD SHX Text

    Note: On bridges over 24' wide use

    AutoCAD SHX Text

    standard pavement markings. Barrier

    AutoCAD SHX Text

    lines not used unless otherwise required.

    AutoCAD SHX Text

    EDGE LINE TRANSITION

    AutoCAD SHX Text

    TO NARROW BRIDGE

    AutoCAD SHX Text

    AND APPROACH

    AutoCAD SHX Text

    BARRIER LINE

    AutoCAD SHX Text

    APPROACH TO OBSTRUCTIONS

    AutoCAD SHX Text

    CENTERLINES FOR TWO LANE TWO WAY

    AutoCAD SHX Text

    URBAN ROADS-PARKING LIMIT LINES

    AutoCAD SHX Text

    2'

    AutoCAD SHX Text

    Crosswalk width; 10'-0"

    AutoCAD SHX Text

    unless otherwise specified

    AutoCAD SHX Text

    2'

    AutoCAD SHX Text

    For one way

    AutoCAD SHX Text

    streets only.

    AutoCAD SHX Text

    12"

    AutoCAD SHX Text

    4"

    AutoCAD SHX Text

    8'

    AutoCAD SHX Text

    min.

    AutoCAD SHX Text

    20'

    AutoCAD SHX Text

    (30 feet at signalized

    AutoCAD SHX Text

    10'

    AutoCAD SHX Text

    4"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    8'

    AutoCAD SHX Text

    min.

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    On intersection approaches

    AutoCAD SHX Text

    parking prohibition applies

    AutoCAD SHX Text

    for both one and two

    AutoCAD SHX Text

    way roads.

    AutoCAD SHX Text

    30'

    AutoCAD SHX Text

    4"

    AutoCAD SHX Text

    Solid White

    AutoCAD SHX Text

    20'

    AutoCAD SHX Text

    28"

    AutoCAD SHX Text

    28"

    AutoCAD SHX Text

    4"

    AutoCAD SHX Text

    Remaining Spaces

    AutoCAD SHX Text

    22' to 26' as appropriate

    AutoCAD SHX Text

    12"

    AutoCAD SHX Text

    12"

    AutoCAD SHX Text

    Solid White

    AutoCAD SHX Text

    Broken Yellow

    AutoCAD SHX Text

    Striping

    AutoCAD SHX Text

    for Two-Way streets

    AutoCAD SHX Text

    Broken White

    AutoCAD SHX Text

    Striping

    AutoCAD SHX Text

    for One-Way streets

    AutoCAD SHX Text

    Type "B" Parking

    AutoCAD SHX Text

    Space Striping

    AutoCAD SHX Text

    Type "A" Parking

    AutoCAD SHX Text

    Space Striping

    AutoCAD SHX Text

    50' Min.

    AutoCAD SHX Text

    60'

    AutoCAD SHX Text

    10'

    AutoCAD SHX Text

    16'-0"

    AutoCAD SHX Text

    24'-0"

    AutoCAD SHX Text

    6'-6"

    AutoCAD SHX Text

    "L"

    AutoCAD SHX Text

    2'

    AutoCAD SHX Text

    4" Solid

    AutoCAD SHX Text

    Yellow

    AutoCAD SHX Text

    4" Broken Yellow

    AutoCAD SHX Text

    1'-4"

    AutoCAD SHX Text

    2'

    AutoCAD SHX Text

    D

    AutoCAD SHX Text

    15' Approx.

    AutoCAD SHX Text

    (See Note 3)

    AutoCAD SHX Text

    APPROACH TO RAILROAD CROSSING ON 2 LANE 2 WAY HIGHWAY

    AutoCAD SHX Text

    2'

    AutoCAD SHX Text

    6'

    AutoCAD SHX Text

    1.6'

    AutoCAD SHX Text

    20'-0"

    AutoCAD SHX Text

    4" Solid White

    AutoCAD SHX Text

    NOT TO SCALE

    AutoCAD SHX Text

    4" Solid Yellow

    AutoCAD SHX Text

    3'-4"

    AutoCAD SHX Text

    RAILROAD CROSSING NOTES: 1. All markings solid while unless indicated All markings solid while unless indicated otherwise. 2. On 4-lane roadways place railroad crossing On 4-lane roadways place railroad crossing approach markings in each lane of the approach. 3. Locate Stop Bar 15' from railroad track or 8' Locate Stop Bar 15' from railroad track or 8' from gate, if present. 4. Place edge lines and lane lines on a Place edge lines and lane lines on a uni-directional approach in a normal manner except that the lane line(s) shall be solid 4" white in lieu of broken for a distance of (D+60') in advance of the stop bands. POSTED LIMIT D D 30 M.P.H. 225' 225' 40 350' 350' 50 475' 475' 60 625'625'

    AutoCAD SHX Text

    Diagonals optional

    AutoCAD SHX Text

    "L"/2

    AutoCAD SHX Text

    12'

    AutoCAD SHX Text

    1'-6"

    AutoCAD SHX Text

    (could also be a 4" solid yellow - see plans)

    AutoCAD SHX Text

    intersections)

    AutoCAD SHX Text

    Curb &

    AutoCAD SHX Text

    Gutter

    AutoCAD SHX Text

    Line of points of diagonals on smooth line from P.C. to center of obstruction

    AutoCAD SHX Text

    4" Solid Yellow

    AutoCAD SHX Text

    4" Solid Yellow

    AutoCAD SHX Text

    1. "S"= offset distance as "S"= offset distance as shown on the plans, otherwise 1 to 2 feet. 2. "L"= driving lane width. "L"= driving lane width. 3. See the Alaska Traffic See the Alaska Traffic Manual for additional guidance and/or restrictions on the use of traffic control devices.

    AutoCAD SHX Text

    of

    AutoCAD SHX Text

    SHEET

    AutoCAD SHX Text

    State of Alaska DOT&PF

    AutoCAD SHX Text

    T-20.04

    AutoCAD SHX Text

    T-20.04

    AutoCAD SHX Text

    1

    AutoCAD SHX Text

    1

    AutoCAD SHX Text

    PAVEMENT MAKING

    AutoCAD SHX Text

    APPLICATIONS

    Sheets and Views

    Title

    t2004_NR.pdf

    Sheets and Views

    t2004

  • All of the above information has been added as a NR Standard Drawings “Cheat Sheet” in Pinnacle. Here is the link NRStandard Drawings

    Steve

    _______________________________________ Steve Powers, P.E. | Design & Operations Engineer | Northern Region Traffic & Safety | Alaska Department of Transportation & Public Facilities2301 Peger Road; Fairbanks, AK 99709 | (: 907.451.5360 | *: [email protected]


Recommended