Standard for flexibility and future-oriented technology

2 | 3

Degenhart front hitches for John Deere tractors: The front hitch is designed in a way to be ideally integrated in the tractor Welded frame construction Construction is adjusted to the relevant tractor type Rocker arm made of special cast alloy Steel bushings with Teflon layer Double-acting lifting cylinder, mounted in ball joint Walterscheid quick coupling Cat.2/3 Solid lower links can easily be swivelled upwards without any tool, with large swing balance

Lower links are compatible with front loader Towing fork in the middle, practical operation Switch valve single-acting/double acting or locked Hydraulic lines to the original control unit Time-saving and easy installation Holder for upper links optional vertical/horizontal

The Degenhart Front Power Take-Off is available in two executions:

Two front p.t.o. executions (JD 6000 – 7530): Short transmission with shaft displacement of 125 mm, gear ratio 1:2 Long transmission with shaft displacement of 254 mm, gear ratio 1:1.9

Fully and optimally integrated in the tractor Up to 150 kW power transmission Speed 1000 rpm p.t.o. stump movable to the left/right by 30° Direction of rotation to the right in driving direction Electro-hydraulic start via proportional valve Silent multiple disc clutch in oil bath Own oil supply with geared pump Soft start to spare machines is adjustable Emergency stop Time-saving and easy installation Can be retrofitted at any later

date without problems

shaft displacement 254 mm

Front p.t.o 7720 – 7930

shaft displacement 125 mm

Technical details you’ll find

on the last side of this brochure!

Degenhart front hitches for John Deere tractors of series 6000 – 7530 and 7600 – 7810

Degenhart front hitches for John Deere tractors of series 5080 – 5100R/M and 5620 – 5820

Degenhart front hitches for John Deere tractors of series 5080 – 5100 G, GF GV and 5E-series

Degenhart front hitches for John Deere tractors of series 7730 – 8530 and 8245, 8270, 8295, 8320, 8345R-series

4 | 5

15° screwing for hydraulic connectionsInternal screw thread and External screw thread M 11 x 1.5. Universally adjustable by counter nut. More space in the area of upper link. The ideal accessory for hydraulic upper link.

Connection screwing for control unit (t-shape)Screwing thread M 22 x 1.5. Internal screw thread and external screw thread with 12 L screwing (M 18 x 1.5) as a side exit. Universally adjustable by counter nut.

7-pole socketThis set includes two 7-pole sockets for mounting at the front hitch. The original socket at the tractor is replaced. In the set all required installation parts are included.

Multiple valveTo switch to single-acting – double-acting – locked

Hydraulics remote controlFor Degenhart front hitches with command armrest for series 6020 to 7930, 8000, 8010, 8020, 8030. Or electric indepent control valve (EICV) 1. to 3. function for series 6020 to 7530 and 1. function for 7720 – 7930 series.

External rear resp. front p.t.o. operationExternal operation from the right and from the left. For SE- or Premium tractors of the series 5020, 5000R/M, 6000, 6010 up to 8030, 8R with/without HMS. Two outside controllers.

Attachment frame, dividedFor fixture of municipal plate at the tractor frame (without front hitch). Installation of a Front p.t.o. is possible.

Municipal plateDIN 76060-B – 15 mm thick, size 3 or 3/5 with hole for p.t.o

Attachment barFor the rigid installation of municipal plate at the front hitch. Suitable for heavy-duty operation.

Short upper and lower linksFor mobile installation of municipal plate at the front hitch.

Attachment frame, boostedFor fixture of municipal plate at the tractor frame (without front hitch). Installation of a Front p.t.o. is not possible.

Municipal plate with front p.t.o. and attachment frameMunicipal plate size 3 or 3/5 (shape B, DIN 76060) with towing eye and hole for p.t.o.

BS44/66

6 | 7

Triangle holdeFor mounting of 14 weight plates. Carried by tractor triangle. Cat. 2

Fixture for relieving springsSet of holders to fix the relieving springs.Incl. installation kit

Front loader collision protectionFront protection to prevent damage to the engine bonnet due to collisions in the course of front loader works and hitting the front loader linkage. Drill holes for relieving springs are included. (Fixture for example by means of shackle) To open the bonnet the protection can be folded off.

Hydraulic connection at frontA hydraulic line with coupling socket and dust protec-tion cover to the front for supply of attachments at the front power lift. One set corresponds to 1 x single-acting hydraulic pipe.

Oil coolerFor the Front Power Take-Off. Provides better cooling for extreme operations.

AccumulatorFor road operation with/without pressure gage

Ballast container without plateFilling weight with concrete 550 kg. Mounting of front attachment is possible.

Ballast container with plate (no fig.)Filling weight with concrete 550 kg. Mounting of front attachment and 14 weight plates is possible.

Tractor trianglecat. 2

Three-point-plate For mounting of tractor basic weight for series 5000 / 6000 / 7000 / 7010. Carried by tractor triangle. Cat. 2

Front plateFor mounting of tractor basic weight.series 5000 / 6000 / 7000 / 7010

Fixture for upper link, front hitchEasy handling. Self-securing during fixture. Easy unlock-ing of security flap. Installation on the frame of front hitch or on the cover sheet.

© F

a. D

egen

hart

· 1

1 / 2

011

· T

he E

rnst

Deg

enha

rt G

mbH

rese

rves

the

righ

t to

chan

ge p

rodu

ct s

peci

ficat

ions

with

out p

rior

not

ice.

· D

esig

n: w

ww

.mat

man

.de

Gewerbestr. 2 · D-87752 Holzgünz-Schwaighausen · Telephon +49 (0) 83 93 / 9 21-0 Fax: +49 (0) 83 93 / 9 21-60 · info@degenhart-systeme.de · www.degenhart-systeme.de

Technical details / shipment

John Deere 5215-5615 5080-5100 G, GF, GV

John Deere 5055-5065 5075E

John Deere 5620-5820 5080-5100R 5070-5100M

John Deere 6100-6400 6010-6410 6020-6420 S 6130-6430

John Deere 6506-6900 6510-6910 6520-6920 6530-6930

John Deere 7600-7800 7610-7810 *7430-7530

John Deere 7720-7920 7730-7930

John Deere 8120-8520 *8130-8530 *8245, 8270, 8295, 8320, 8345R

Front hitches category 2 or 1 2 2 2 2 2 2 2

Lifting power at tail hook kg

2250 1800 2800 3500 3500 5000 / *3500 / *5000

5000 / 2800*5000 6000

Double-acting lifting cylinder

optional serial serial serial serial serial serial serial

Switch valve stop-cock serial serial serial serial serial serial serial

Tail hookserial

optional WS cat. 2

WS cat. 2Walter- scheid cat. 2

Walter- scheid cat. 3L

Walter- scheid cat. 3L

Walter- scheid cat. 3L

Walter- scheid cat. 3L

Walter- scheid cat. 3L

Lower links can easily be swivelled upwards without any tool

Top link Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2 Cat. 2Cat. 2 /

*3 heavy

Carrier for upper link horizontal or vertical

horizontalhorizontal or vertical

horizontal or vertical

horizontal or vertical

horizontal or vertical

vertical vertical

Push bar serial serial

Power take off rpm 1000 rpm, right direction

Max. power of p.t.o kW 100 100 110 150 150 150 150 –

Continues power kW 80 80 90 125 125 125 125 –

p.t.o. profile DIN9611 1 3 / 8“ –