B1
■Gearmotor/Brake Motor
Model and Type Designation/Standard Model Lineup
3-phase Performance Table/Dimension Diagram
1-phase Performance Table/Dimension Diagram
■Water-Resistant(IP65) Gearmotor/Brake Motor
Model and Type Designation/Standard Model Lineup
3-phase Performance Table/Dimension Diagram
1-phase Performance Table/Dimension Diagram
■Speed Control Gearmotor
Model and Type Designation/Standard Model Lineup
1-phase Performance Table/Dimension Diagram
P.
P.
P.
P.
P.
P.
P.
P.
B5
B9
B35
B59
B63
B77
B85
B89
H TypeGearmotor
Right Angle Shaft
Model and Type DesignationStandard Model Lineup
HType
Right Angle Shaft
Gearmotor
B3B2
① ② ④ ⑤ ③
L W K15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
H
H-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. Designation
H
L
F
M
MN
W
V
U
P
Output Shaft Diameter
10 : 1/10 ~ 1800 : 1/1800
T15
T25
T40
T60
T90
S15
S25
S40
S60
S90
Blank
W
T
K
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Motor
: With Brake Motor
: With Water-resistant Motor
: With Water-resistant Brake Motor
: With Speed Control Gearmotor
: With Speed Control Gearmotor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: T-Type Terminal Box
: K-Type Terminal Box
: Rectifier built-in terminal box for brake motor
: Terminal box for Speed Control type motor
: Standard Specs.
: Mark for Additional Specs.
(Output Shaft material:SUS420J2)
(Output Shaft material:SUS420J2)
U-Type(With Controller)
P-Type(Controller Sells Separately)
F 22 450 S40H XC
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-phase: 1-phase:
380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz
LT
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
MMN T6
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
H-Type(Right Angle Shaft) Model and Type Designation
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Note 1: Note 2: Note 3:
For the types stated below, manufacturing with double voltage is not feasible. ●Water-resistant motors 3-phase (Single-phase can be acceptable as a special order.) Since the water-resistant motors are specifications with exclusive cab tyre cable, the optional terminal box cannot be attached. Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56
Position indicator for lead-wire, terminal box and cab tyre cable
Refer to the indication mark list in P. E54 for details.
gearhead
Motor
L: R: T:
Model and Type Designation
Model and Type Designation
GTR Mini Series
B3B2
① ② ④ ⑤ ③
L W K15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
H
H-Type gearmotors are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. Designation
H
L
F
M
MN
W
V
U
P
Output Shaft Diameter
10 : 1/10 ~ 1800 : 1/1800
T15
T25
T40
T60
T90
S15
S25
S40
S60
S90
Blank
W
T
K
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Motor
: With Brake Motor
: With Water-resistant Motor
: With Water-resistant Brake Motor
: With Speed Control Gearmotor
: With Speed Control Gearmotor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: T-Type Terminal Box
: K-Type Terminal Box
: Rectifier built-in terminal box for brake motor
: Terminal box for Speed Control type motor
: Standard Specs.
: Mark for Additional Specs.
(Output Shaft material:SUS420J2)
(Output Shaft material:SUS420J2)
U-Type(With Controller)
P-Type(Controller Sells Separately)
F 22 450 S40H XC
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-phase: 1-phase:
380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz
LT
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
MMN T6
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
H-Type(Right Angle Shaft) Model and Type Designation
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Note: Spec. Designation does not appear on the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Note 1: Note 2: Note 3:
For the types stated below, manufacturing with double voltage is not feasible. ●Water-resistant motors 3-phase (Single-phase can be acceptable as a special order.) Since the water-resistant motors are specifications with exclusive cab tyre cable, the optional terminal box cannot be attached. Be sure that the specification of C-Type Terminal Box for brake motors with rectifier built-in is different from that for the speed control type. For more details, refer to P. E40 and P. E56
Position indicator for lead-wire, terminal box and cab tyre cable
Refer to the indication mark list in P. E54 for details.
gearhead
Motor
L: R: T:
Model and Type Designation
Model and Type Designation
GTR Mini Series
B5B4
Right Angle Shaft
Model and Type DesignationStandard Model Lineup
HType
Right Angle Shaft
Gearmotor
GearmotorGearmotor with Brake
3-Phase
15W~90W
3 Rated Power Source 200V 50/60Hz, 220V/60Hz
Class E
Direct start
Totally Enclosed non-ventilated or Totally Enclosed fan-cooled
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
S43C
Aluminium die-cast
-10℃~40℃
85% max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
15W~90W
100V 50/60Hz
Class E
Capacitor Start
1-Phase
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Starting Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Case Material
Ambient Humidity
Altitude
Painting Method
Painting Color
Insulation Classification
Protective cooling Method
Output Shaft Material
Ambient Temperature
Installation Location
Environment
B5B4
Right Angle Shaft
Model and Type DesignationStandard Model Lineup
HType
Right Angle Shaft
Gearmotor
GearmotorGearmotor with Brake
3-Phase
15W~90W
3 Rated Power Source 200V 50/60Hz, 220V/60Hz
Class E
Direct start
Totally Enclosed non-ventilated or Totally Enclosed fan-cooled
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
S43C
Aluminium die-cast
-10℃~40℃
85% max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
15W~90W
100V 50/60Hz
Class E
Capacitor Start
1-Phase
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Starting Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Case Material
Ambient Humidity
Altitude
Painting Method
Painting Color
Insulation Classification
Protective cooling Method
Output Shaft Material
Ambient Temperature
Installation Location
Environment
B7B6
gearhead
Motor
① ② ④ ⑤ ③
L W K15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
H
H
L
F
M
MN
Output Shaft Diameter
10 : 1/10 ~ 1800 : 1/1800
T15
T25
T40
T60
T90
S15
S25
S40
S60
S90
Blank
W
T
K
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Motor
: With Brake Motor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: T-Type Terminal Box
: K-Type Terminal Box
: Rectifier built-in terminal box for brake motor
: Standard Specs.
: Mark for Additional Specs.
F 22 450 S40H X T6C
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-phase: 1-phase:
380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz
LT
MMN
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
153-Phase 15W
221-Phase 15W
15
3-Phase 25W
22
28
1-Phase 25W
15
3-Phase 40W
18
22
28
32
1-Phase 40W
15
3-Phase 60W
18
22
28
32
1-Phase 60W
18
3-Phase 90W 28
32
40
1-Phase 90W
HLM HFM
HLMN HFMN
LRTLRT
LRTLRTLRT
LRTLRTLRTLRTLRT
LRTLRTLRTLRTLRT
LRTLRTLRTLRT
(Note 1)
(Note 1) (Note 2)
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupH-Type(Right Angle Shaft) Model and Type Designation
H-Type gearmotors and gearmotor with brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: R: T:
Position indicator for lead-wire, terminal box
Refer to the indication mark list in P. E54 for details.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. DesignationNote: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
Gearmotor
Gearmotor with Brake
The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) The frame number will be "18" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "18" only. The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2) 3)
Foot Mount type Flange Mount type(Up to Frame 22)
Model and Type Designation
Model and Type Designation
GTR Mini Series
B7B6
gearhead
Motor
① ② ④ ⑤ ③
L W K15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
H
H
L
F
M
MN
Output Shaft Diameter
10 : 1/10 ~ 1800 : 1/1800
T15
T25
T40
T60
T90
S15
S25
S40
S60
S90
Blank
W
T
K
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Motor
: With Brake Motor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: T-Type Terminal Box
: K-Type Terminal Box
: Rectifier built-in terminal box for brake motor
: Standard Specs.
: Mark for Additional Specs.
F 22 450 S40H X T6C
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-phase: 1-phase:
380V/50Hz、400V/50Hz、400V/60Hz、440V/60Hz 200V/50Hz、200V/60Hz
LT
MMN
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
1/1200 1/1500 1/1800
153-Phase 15W
221-Phase 15W
15
3-Phase 25W
22
28
1-Phase 25W
15
3-Phase 40W
18
22
28
32
1-Phase 40W
15
3-Phase 60W
18
22
28
32
1-Phase 60W
18
3-Phase 90W 28
32
40
1-Phase 90W
HLM HFM
HLMN HFMN
LRTLRT
LRTLRTLRT
LRTLRTLRTLRTLRT
LRTLRTLRTLRTLRT
LRTLRTLRTLRT
(Note 1)
(Note 1) (Note 2)
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupH-Type(Right Angle Shaft) Model and Type Designation
H-Type gearmotors and gearmotor with brake are classified by codes as shown below. Specify these codes in your inquiry and order.
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: R: T:
Position indicator for lead-wire, terminal box
Refer to the indication mark list in P. E54 for details.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. DesignationNote: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
Gearmotor
Gearmotor with Brake
The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) The frame number will be "18" for the models with power supply other than 3-phase standard voltage. As for the single-phase models, the frame number is "18" only. The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2) 3)
Foot Mount type Flange Mount type(Up to Frame 22)
Model and Type Designation
Model and Type Designation
GTR Mini Series
B9B8
L-shaft R-shaft T-shaft
Right Angle Shaft
Performance TableDimension diagram
GearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
3-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E30, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
B9B8
L-shaft R-shaft T-shaft
Right Angle Shaft
Performance TableDimension diagram
GearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
3-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E30, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
B11B10
15W
15
22
15
22
T15
T15W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.14/0.13/0.13
0.14/0.13/0.13
0.11/0.12/0.10/0.11
0.11/0.12/0.10/0.11
1350/1550/1600
1350/1550/1600
1400/1400/1700/1700
1400/1400/1700/1700
E
HLM-15 -10~240-T15HLM-15 -10~240-T15WFig.B-1
〔Round Weight 3kg〕
Fig.B-2
〔Round Weight 6kg〕
LRTLRT
HLM-22 -300~1800-T15HLM-22 -300~1800-T15W
LRTLRT
HLM-15(LRT)-T15 HLM-15(LRT)-T15W
HLM-22(LRT)-T15 HLM-22(LRT)-T15W
HFM-15 -10~240-T15HFM-15 -10~240-T15WFig.B-3
〔Round Weight 3kg〕
Fig.B-4
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~1800-T15HFM-22 -300~1800-T15W
LRTLRT
HFM-15(LRT)-T15 HFM-15(LRT)-T15W
HFM-22(LRT)-T15 HFM-22(LRT)-T15W
HLM HFM HLMN HFMN
3-phase 15W
15
22
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
P.B11 Fig.B-1 3kg
P.B11 Fig.B-3 3kg
P.B12 Fig.B-5 3kg
P.B12 Fig.B-7 3kg
P.B11 Fig.B-2 6kg
P.B11 Fig.B-4 6kg
P.B12 Fig.B-6 6kg
P.B12 Fig.B-8 6kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
H-Type〔Right Angel Shaft〕 3-Phase 15W H-Type〔Right Angel Shaft〕 3-Phase 15W
GearmotorGearmotorGearmotor with Brake
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed or
Totally Enclosed Fan-cooled
GTR Mini Series GTR Mini Series
B11B10
15W
15
22
15
22
T15
T15W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.14/0.13/0.13
0.14/0.13/0.13
0.11/0.12/0.10/0.11
0.11/0.12/0.10/0.11
1350/1550/1600
1350/1550/1600
1400/1400/1700/1700
1400/1400/1700/1700
E
HLM-15 -10~240-T15HLM-15 -10~240-T15WFig.B-1
〔Round Weight 3kg〕
Fig.B-2
〔Round Weight 6kg〕
LRTLRT
HLM-22 -300~1800-T15HLM-22 -300~1800-T15W
LRTLRT
HLM-15(LRT)-T15 HLM-15(LRT)-T15W
HLM-22(LRT)-T15 HLM-22(LRT)-T15W
HFM-15 -10~240-T15HFM-15 -10~240-T15WFig.B-3
〔Round Weight 3kg〕
Fig.B-4
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~1800-T15HFM-22 -300~1800-T15W
LRTLRT
HFM-15(LRT)-T15 HFM-15(LRT)-T15W
HFM-22(LRT)-T15 HFM-22(LRT)-T15W
HLM HFM HLMN HFMN
3-phase 15W
15
22
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
P.B11 Fig.B-1 3kg
P.B11 Fig.B-3 3kg
P.B12 Fig.B-5 3kg
P.B12 Fig.B-7 3kg
P.B11 Fig.B-2 6kg
P.B11 Fig.B-4 6kg
P.B12 Fig.B-6 6kg
P.B12 Fig.B-8 6kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
H-Type〔Right Angel Shaft〕 3-Phase 15W H-Type〔Right Angel Shaft〕 3-Phase 15W
GearmotorGearmotorGearmotor with Brake
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed or
Totally Enclosed Fan-cooled
GTR Mini Series GTR Mini Series
B13B12
HLMN-15 -10~240-T15HLMN-15 -10~240-T15WFig.B-5
〔Round Weight 3kg〕
Fig.B-6LRTLRT
HLMN-22 -300~1800-T15HLMN-22 -300~1800-T15W
LRTLRT
〔Round Weight 6kg〕 HLMN-15(LRT)-T15 HLMN-15(LRT)-T15W
HLM-22(LRT)-T15 HLM-22(LRT)-T15W
HFMN-15 -10~240-T15HFMN-15 -10~240-T15WFig.B-7
〔Round Weight 3kg〕
Fig.B-8LRTLRT
HFMN-22 -300~1800-T15HFMN-22 -300~1800-T15W
LRTLRT
〔Round Weight 6kg〕 HFMN-15(LRT)-T15 HFMN-15(LRT)-T15W
HFMN-22(LRT)-T15 HFMN-22(LRT)-T15W
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
H-Type〔Right Angel Shaft〕 3-Phase 15WGearmotor with Brake
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
GTR Mini Series
B13B12
HLMN-15 -10~240-T15HLMN-15 -10~240-T15WFig.B-5
〔Round Weight 3kg〕
Fig.B-6LRTLRT
HLMN-22 -300~1800-T15HLMN-22 -300~1800-T15W
LRTLRT
〔Round Weight 6kg〕 HLMN-15(LRT)-T15 HLMN-15(LRT)-T15W
HLM-22(LRT)-T15 HLM-22(LRT)-T15W
HFMN-15 -10~240-T15HFMN-15 -10~240-T15WFig.B-7
〔Round Weight 3kg〕
Fig.B-8LRTLRT
HFMN-22 -300~1800-T15HFMN-22 -300~1800-T15W
LRTLRT
〔Round Weight 6kg〕 HFMN-15(LRT)-T15 HFMN-15(LRT)-T15W
HFMN-22(LRT)-T15 HFMN-22(LRT)-T15W
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
H-Type〔Right Angel Shaft〕 3-Phase 15WGearmotor with Brake
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
GTR Mini Series
B15B14
25W
15
22
28
15
22
28
T25
T25W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.21/0.19/0.19
0.21/0.19/0.19
0.18/0.17/0.17
0.11/0.12/0.11/0.12
0.11/0.12/0.11/0.12
0.09/0.09/0.09/0.09
1350/1550/1600
1350/1550/1600
1350/1550/1600
1350/1400/1600/1650
1350/1400/1600/1650
1300/1350/1550/1600
E
Fig.B-9
〔Round Weight 3kg〕
Fig.B-11
〔Round Weight 9kg〕
Fig.B-10
〔Round Weight 6kg〕
HLM-15 -10~240-T25HLM-15 -10~240-T25W
LRTLRT
HLM-22 -300~900-T25HLM-22 -300~900-T25W
LRTLRT
HLM-28 -1200~1800-T25HLM-28 -1200~1800-T25W
LRTLRT
HLM-15(LRT)-T25 HLM-15(LRT)-T25W
HLM-22(LRT)-T25 HLM-22(LRT)-T25W
HLM-28(LRT)-T25 HLM-28(LRT)-T25W
Fig.B-12
〔Round Weight 3kg〕
Fig.B-13
〔Round Weight 6kg〕
HFM-15 -10~240-T25HFM-15 -10~240-T25W
LRTLRT
HFM-22 -300~900-T25HFM-22 -300~900-T25W
LRTLRT
HFM-15(LRT)-T25 HFM-15(LRT)-T25W
HFM-22(LRT)-T25 HFM-22(LRT)-T25W
HLM HFM HLMN HFMN
3-phase 25W
15
22
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
P.B15 Fig.B-9 3kg
P.B15 Fig.B-12 3kg
P.B16 Fig.B-14 3kg
P.B16 Fig.B-17 3kg
P.B15 Fig.B-10 6kg
P.B15 Fig.B-13 6kg
P.B16 Fig.B-15 6kg
P.B15 Fig.B-11 9kg
P.B16 Fig.B-16 9kg
P.B16 Fig.B-18 6kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25W H-Type〔Right Angel Shaft〕 3-Phase 25W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B15B14
25W
15
22
28
15
22
28
T25
T25W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.21/0.19/0.19
0.21/0.19/0.19
0.18/0.17/0.17
0.11/0.12/0.11/0.12
0.11/0.12/0.11/0.12
0.09/0.09/0.09/0.09
1350/1550/1600
1350/1550/1600
1350/1550/1600
1350/1400/1600/1650
1350/1400/1600/1650
1300/1350/1550/1600
E
Fig.B-9
〔Round Weight 3kg〕
Fig.B-11
〔Round Weight 9kg〕
Fig.B-10
〔Round Weight 6kg〕
HLM-15 -10~240-T25HLM-15 -10~240-T25W
LRTLRT
HLM-22 -300~900-T25HLM-22 -300~900-T25W
LRTLRT
HLM-28 -1200~1800-T25HLM-28 -1200~1800-T25W
LRTLRT
HLM-15(LRT)-T25 HLM-15(LRT)-T25W
HLM-22(LRT)-T25 HLM-22(LRT)-T25W
HLM-28(LRT)-T25 HLM-28(LRT)-T25W
Fig.B-12
〔Round Weight 3kg〕
Fig.B-13
〔Round Weight 6kg〕
HFM-15 -10~240-T25HFM-15 -10~240-T25W
LRTLRT
HFM-22 -300~900-T25HFM-22 -300~900-T25W
LRTLRT
HFM-15(LRT)-T25 HFM-15(LRT)-T25W
HFM-22(LRT)-T25 HFM-22(LRT)-T25W
HLM HFM HLMN HFMN
3-phase 25W
15
22
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
P.B15 Fig.B-9 3kg
P.B15 Fig.B-12 3kg
P.B16 Fig.B-14 3kg
P.B16 Fig.B-17 3kg
P.B15 Fig.B-10 6kg
P.B15 Fig.B-13 6kg
P.B16 Fig.B-15 6kg
P.B15 Fig.B-11 9kg
P.B16 Fig.B-16 9kg
P.B16 Fig.B-18 6kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25W H-Type〔Right Angel Shaft〕 3-Phase 25W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B17B16
Fig.B-14
〔Round Weight 3kg〕
Fig.B-16
〔Round Weight 9kg〕
Fig.B-15
〔Round Weight 6kg〕
HLMN-15 -10~240-T25HLMN-15 -10~240-T25W
LRTLRT
HLMN-22 -300~900-T25HLMN-22 -300~900-T25W
LRTLRT
HLMN-28 -1200~1800-T25HLMN-28 -1200~1800-T25W
LRTLRT
HLMN-15(LRT)-T25 HLMN-15(LRT)-T25W
HLMN-22(LRT)-T25 HLMN-22(LRT)-T25W
HLMN-28(LRT)-T25 HLMN-28(LRT)-T25W
Fig.B-17
〔Round Weight 3kg〕
Fig.B-18
〔Round Weight 6kg〕
HFMN-15 -10~240-T25HFMN-15 -10~240-T25W
LRTLRT
HFMN-22 -300~900-T25HFMN-22 -300~900-T25W
LRTLRT
HFMN-15(LRT)-T25 HFMN-15(LRT)-T25W
HFMN-22(LRT)-T25 HFMN-22(LRT)-T25W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B17B16
Fig.B-14
〔Round Weight 3kg〕
Fig.B-16
〔Round Weight 9kg〕
Fig.B-15
〔Round Weight 6kg〕
HLMN-15 -10~240-T25HLMN-15 -10~240-T25W
LRTLRT
HLMN-22 -300~900-T25HLMN-22 -300~900-T25W
LRTLRT
HLMN-28 -1200~1800-T25HLMN-28 -1200~1800-T25W
LRTLRT
HLMN-15(LRT)-T25 HLMN-15(LRT)-T25W
HLMN-22(LRT)-T25 HLMN-22(LRT)-T25W
HLMN-28(LRT)-T25 HLMN-28(LRT)-T25W
Fig.B-17
〔Round Weight 3kg〕
Fig.B-18
〔Round Weight 6kg〕
HFMN-15 -10~240-T25HFMN-15 -10~240-T25W
LRTLRT
HFMN-22 -300~900-T25HFMN-22 -300~900-T25W
LRTLRT
HFMN-15(LRT)-T25 HFMN-15(LRT)-T25W
HFMN-22(LRT)-T25 HFMN-22(LRT)-T25W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B19B18
40W
15
18
22
28
32
15
18
22
28
32
T40
T40W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.29/0.27/0.27
0.27/0.26/0.26
0.29/0.27/0.27
0.27/0.26/0.26
0.27/0.26/0.26
0.14/0.14/0.14/0.14
0.13/0.14/0.13/0.14
0.14/0.14/0.14/0.14
0.13/0.14/0.13/0.14
0.13/0.14/0.13/0.14
1350/1550/1600
1350/1550/1550
1350/1550/1600
1350/1550/1550
1350/1550/1550
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
E
HLM-15 -10~120-T40Fig.B-19
〔Round Weight 3kg〕
Fig.B-23
〔Round Weight 6kg〕
Fig.B-20
〔Round Weight 3kg〕
Fig.B-24
〔Round Weight 9kg〕
Fig.B-21
〔Round Weight 4kg〕
LRT HLM-15 -10~120-T40W
LRT
HLM-18 -160~240-T40HLM-18 -160~240-T40W
LRTLRT
Fig.B-22
〔Round Weight 6kg〕
HLM-22 -300~450-T40LRT
Fig.B-25
〔Round Weight 15kg〕
HLM-32 -1200~1800-T40HLM-32 -1200~1800-T40W
LRTLRT
HLM-28 -600~900-T40HLM-28 -600~900-T40W
LRTLRT
HLM-22 -300~450-T40WLRT
HLM-18(LRT)-T40 HLM-18(LRT)-T40W
HLM-28(LRT)-T40 HLM-28(LRT)-T40W
HLM-32(LRT)-T40 HLM-32(LRT)-T40W
HLM HFM HLMN HFMN
3-phase 40W
15
22
18
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
P.B19 Fig.B-19
P.B20 Fig.B-26
Fig.B-20 Fig.B-27P.B21 Fig.B-31 3kg
P.B22 Fig.B-36 3kg
P.B19 Fig.B-21 4kg
P.B20 Fig.B-28 4kg
P.B21 Fig.B-32 4kg
P.B19 Fig.B-25 15kg
P.B21 Fig.B-35 15kg
P.B22 Fig.B-37 4kg
P.B19 Fig.B-22
P.B20 Fig.B-29 P.B21
Fig.B-33 6kg
P.B19 Fig.B-24 9kg
P.B21 Fig.B-34 9kg
P.B22 Fig.B-38 6kg
50Hz 60Hz N・m kgf・m N kgf
(400V) (400V)
Fig.B-23 Fig.B-30
6kg 6kg(400V) (400V)
3kg 3kg
CAD Data: HLM-15(LRT)-T40 CAD Data: HLM-15(LRT)-T40W
CAD Data: HLM-22(LRT)-T40 CAD Data: HLM-22(LRT)-T40W
CAD Data:
CAD Data: CAD Data:
Foot Mount type
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.35
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B19B18
40W
15
18
22
28
32
15
18
22
28
32
T40
T40W
50/60/60
50/50/60/60
200/200/220
380/400/400/440
0.29/0.27/0.27
0.27/0.26/0.26
0.29/0.27/0.27
0.27/0.26/0.26
0.27/0.26/0.26
0.14/0.14/0.14/0.14
0.13/0.14/0.13/0.14
0.14/0.14/0.14/0.14
0.13/0.14/0.13/0.14
0.13/0.14/0.13/0.14
1350/1550/1600
1350/1550/1550
1350/1550/1600
1350/1550/1550
1350/1550/1550
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
E
HLM-15 -10~120-T40Fig.B-19
〔Round Weight 3kg〕
Fig.B-23
〔Round Weight 6kg〕
Fig.B-20
〔Round Weight 3kg〕
Fig.B-24
〔Round Weight 9kg〕
Fig.B-21
〔Round Weight 4kg〕
LRT HLM-15 -10~120-T40W
LRT
HLM-18 -160~240-T40HLM-18 -160~240-T40W
LRTLRT
Fig.B-22
〔Round Weight 6kg〕
HLM-22 -300~450-T40LRT
Fig.B-25
〔Round Weight 15kg〕
HLM-32 -1200~1800-T40HLM-32 -1200~1800-T40W
LRTLRT
HLM-28 -600~900-T40HLM-28 -600~900-T40W
LRTLRT
HLM-22 -300~450-T40WLRT
HLM-18(LRT)-T40 HLM-18(LRT)-T40W
HLM-28(LRT)-T40 HLM-28(LRT)-T40W
HLM-32(LRT)-T40 HLM-32(LRT)-T40W
HLM HFM HLMN HFMN
3-phase 40W
15
22
18
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
P.B19 Fig.B-19
P.B20 Fig.B-26
Fig.B-20 Fig.B-27P.B21 Fig.B-31 3kg
P.B22 Fig.B-36 3kg
P.B19 Fig.B-21 4kg
P.B20 Fig.B-28 4kg
P.B21 Fig.B-32 4kg
P.B19 Fig.B-25 15kg
P.B21 Fig.B-35 15kg
P.B22 Fig.B-37 4kg
P.B19 Fig.B-22
P.B20 Fig.B-29 P.B21
Fig.B-33 6kg
P.B19 Fig.B-24 9kg
P.B21 Fig.B-34 9kg
P.B22 Fig.B-38 6kg
50Hz 60Hz N・m kgf・m N kgf
(400V) (400V)
Fig.B-23 Fig.B-30
6kg 6kg(400V) (400V)
3kg 3kg
CAD Data: HLM-15(LRT)-T40 CAD Data: HLM-15(LRT)-T40W
CAD Data: HLM-22(LRT)-T40 CAD Data: HLM-22(LRT)-T40W
CAD Data:
CAD Data: CAD Data:
Foot Mount type
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.35
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B21B20
Flange Mount Type Gearmotor Foot Mount Type Gearmotor with Brake
Fig.B-29
〔Round Weight 6kg〕
HFM-22 -300~450-T40
HFM-15 -10~120-T40Fig.B-26
〔Round Weight 3kg〕
Fig.B-30
〔Round Weight 6kg〕
Fig.B-27
〔Round Weight 3kg〕
Fig.B-28
〔Round Weight 4kg〕
LRT HFM-15 -10~120-T40W
LRT
HFM-18 -160~240-T40HFM-18 -160~240-T40W
LRTLRT
LRT HFM-22 -300~450-T40W
LRT
HFM-18(LRT)-T40 HFM-18(LRT)-T40W
HLMN-15 -10~120-T40HLMN-15 -10~120-T40WFig.B-31
〔Round Weight 3kg〕
Fig.B-34
〔Round Weight 9kg〕
Fig.B-32
〔Round Weight 4kg〕
Fig.B-35
〔Round Weight 15kg〕
Fig.B-33
〔Round Weight 6kg〕
LRTLRT
HLMN-18 -160~240-T40HLMN-18 -160~240-T40W
LRTLRT
HLMN-22 -300~450-T40HLMN-22 -300~450-T40W
LRTLRT
HLMN-32 -1200~1800-T40HLMN-32 -1200~1800-T40W
LRTLRT
HLMN-28 -600~900-T40HLMN-28 -600~900-T40W
LRTLRT
HLMN-15(LRT)-T40 HLMN-15(LRT)-T40W
HLMN-28(LRT)-T40 HLMN-28(LRT)-T40W
HLMN-18(LRT)-T40 HLMN-18(LRT)-T40W
HLMN-32(LRT)-T40 HLMN-32(LRT)-T40W
HLMN-22(LRT)-T40 HLMN-22(LRT)-T40W
CAD Data: HFM-15(LRT)-T40 CAD Data: HFM-15(LRT)-T40W
CAD Data: HFM-22(LRT)-T40 CAD Data: HFM-22(LRT)-T40W
CAD Data:
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
Flange Mount type(Up to Frame 22)
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
GTR Mini Series GTR Mini Series
B21B20
Flange Mounted Type Gearmotor Foot Mount Type Gearmotor with Brake
Fig.B-29
〔Round Weight 6kg〕
HFM-22 -300~450-T40
HFM-15 -10~120-T40Fig.B-26
〔Round Weight 3kg〕
Fig.B-30
〔Round Weight 6kg〕
Fig.B-27
〔Round Weight 3kg〕
Fig.B-28
〔Round Weight 4kg〕
LRT HFM-15 -10~120-T40W
LRT
HFM-18 -160~240-T40HFM-18 -160~240-T40W
LRTLRT
LRT HFM-22 -300~450-T40W
LRT
HFM-18(LRT)-T40 HFM-18(LRT)-T40W
HLMN-15 -10~120-T40HLMN-15 -10~120-T40WFig.B-31
〔Round Weight 3kg〕
Fig.B-34
〔Round Weight 9kg〕
Fig.B-32
〔Round Weight 4kg〕
Fig.B-35
〔Round Weight 15kg〕
Fig.B-33
〔Round Weight 6kg〕
LRTLRT
HLMN-18 -160~240-T40HLMN-18 -160~240-T40W
LRTLRT
HLMN-22 -300~450-T40HLMN-22 -300~450-T40W
LRTLRT
HLMN-32 -1200~1800-T40HLMN-32 -1200~1800-T40W
LRTLRT
HLMN-28 -600~900-T40HLMN-28 -600~900-T40W
LRTLRT
HLMN-15(LRT)-T40 HLMN-15(LRT)-T40W
HLMN-28(LRT)-T40 HLMN-28(LRT)-T40W
HLMN-18(LRT)-T40 HLMN-18(LRT)-T40W
HLMN-32(LRT)-T40 HLMN-32(LRT)-T40W
HLMN-22(LRT)-T40 HLMN-22(LRT)-T40W
CAD Data: HFM-15(LRT)-T40 CAD Data: HFM-15(LRT)-T40W
CAD Data: HFM-22(LRT)-T40 CAD Data: HFM-22(LRT)-T40W
CAD Data:
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
Flange Mount type(Up to Frame 22)
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
GTR Mini Series GTR Mini Series
B23B22
Foot Mount Type Gearmotor with Brake
Fig.B-37
〔Round Weight 4kg〕
Fig.B-38
〔Round Weight 6kg〕
HFMN-18 -160~240-T40HFMN-18 -160~240-T40W
LRTLRT
HFMN-22 -300~450-T40HFMN-22 -300~450-T40W
LRTLRT
HFMN-15 -10~120-T40HFMN-15 -10~120-T40WFig.B-36
〔Round Weight 3kg〕
LRTLRT
HFMN-15(LRT)-T40 HFMN-15(LRT)-T40W
HFMN-18(LRT)-T40 HFMN-18(LRT)-T40W
HFMN-22(LRT)-T40 HFMN-22(LRT)-T40W
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B23B22
Foot Mount Type Gearmotor with Brake
Fig.B-37
〔Round Weight 4kg〕
Fig.B-38
〔Round Weight 6kg〕
HFMN-18 -160~240-T40HFMN-18 -160~240-T40W
LRTLRT
HFMN-22 -300~450-T40HFMN-22 -300~450-T40W
LRTLRT
HFMN-15 -10~120-T40HFMN-15 -10~120-T40WFig.B-36
〔Round Weight 3kg〕
LRTLRT
HFMN-15(LRT)-T40 HFMN-15(LRT)-T40W
HFMN-18(LRT)-T40 HFMN-18(LRT)-T40W
HFMN-22(LRT)-T40 HFMN-22(LRT)-T40W
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B25B24
HLM-15 -10~60-T60Fig.B-39
〔Round Weight 3kg〕
Fig.B-42
〔Round Weight 9kg〕
Fig.B-40
〔Round Weight 4kg〕
Fig.B-43
〔Round Weight 15kg〕
Fig.B-41
〔Round Weight 6kg〕
LRT
HLM-18 -80~240-T60HLM-18 -10~240-T60W
LRTLRT
HLM-22 -300~450-T60HLM-22 -300~450-T60W
LRTLRT
HLM-32 -1200~1800-T60HLM-32 -1200~1800-T60W
LRTLRT
HLM-28 -600~900-T60HLM-28 -600~900-T60W
LRTLRT
HLM-22(LRT)-T60 HLM-22(LRT)-T60W
HLM-18(LRT)-T60 HLM-18(LRT)-T60W
HLM-28(LRT)-T60 HLM-28(LRT)-T60W
HLM-32(LRT)-T60 HLM-32(LRT)-T60W
60W
15
18
22
28
32
18
22
28
32
T60 50/60/60
T60W 50/50/60/60
200/200/220
380/400/400/440
0.42/0.39/0.39
0.40/0.36/0.36
0.42/0.39/0.39
0.40/0.36/0.36
0.40/0.36/0.36
0.17/0.17/0.17/0.17
0.20/0.20/0.20/0.20
0.17/0.17/0.17/0.17
0.17/0.17/0.17/0.17
1350/1550/1550
1350/1550/1600
1350/1550/1550
1350/1550/1600
1350/1550/1600
1300/1350/1550/1600
1250/1300/1500/1550
1300/1350/1550/1600
1300/1350/1550/1600
E
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
HLM HFM HLMN HFMN
3-phase 60W
15 ・ 18
22
18
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
35
45
55
60
70
80
90
90
130
130
140
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
P.B25 Fig.B-39 3kg
P.B26 Fig.B-44 3kg
Fig.B-40 Fig.B-45
P.B25 Fig.B-40 4kg
P.B26 Fig.B-45 4kg
P.B27 Fig.B-48 4kg
P.B25 Fig.B-43 15kg
P.B27 Fig.B-51 15kg
P.B28 Fig.B-53 4kg
P.B25 Fig.B-41 6kg
P.B26 Fig.B-46 6kg
P.B27 Fig.B-49 6kg
P.B28 Fig.B-54 6kg
P.B25 Fig.B-42 9kg
P.B27 Fig.B-50 9kg
50Hz 60Hz N・m kgf・m N kgf
(Frame No.18) (Frame No.18)
P.B27 Fig.B-47 3kg
Fig.B-48(Frame No.18)
P.B28 Fig.B-52 3kg
Fig.B-53(Frame No.18)
*
4kg 4kg 4kg 4kg
CAD Data: HLM-15(LRT)-T60 CAD Data:
CAD Data:
CAD Data:
CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) As for reduction ratio 1/15 to 1/60, the frame number will be "15" for the standard voltage, "18" for the other voltage. The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B25B24
HLM-15 -10~60-T60Fig.B-39
〔Round Weight 3kg〕
Fig.B-42
〔Round Weight 9kg〕
Fig.B-40
〔Round Weight 4kg〕
Fig.B-43
〔Round Weight 15kg〕
Fig.B-41
〔Round Weight 6kg〕
LRT
HLM-18 -80~240-T60HLM-18 -10~240-T60W
LRTLRT
HLM-22 -300~450-T60HLM-22 -300~450-T60W
LRTLRT
HLM-32 -1200~1800-T60HLM-32 -1200~1800-T60W
LRTLRT
HLM-28 -600~900-T60HLM-28 -600~900-T60W
LRTLRT
HLM-22(LRT)-T60 HLM-22(LRT)-T60W
HLM-18(LRT)-T60 HLM-18(LRT)-T60W
HLM-28(LRT)-T60 HLM-28(LRT)-T60W
HLM-32(LRT)-T60 HLM-32(LRT)-T60W
60W
15
18
22
28
32
18
22
28
32
T60 50/60/60
T60W 50/50/60/60
200/200/220
380/400/400/440
0.42/0.39/0.39
0.40/0.36/0.36
0.42/0.39/0.39
0.40/0.36/0.36
0.40/0.36/0.36
0.17/0.17/0.17/0.17
0.20/0.20/0.20/0.20
0.17/0.17/0.17/0.17
0.17/0.17/0.17/0.17
1350/1550/1550
1350/1550/1600
1350/1550/1550
1350/1550/1600
1350/1550/1600
1300/1350/1550/1600
1250/1300/1500/1550
1300/1350/1550/1600
1300/1350/1550/1600
E
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
HLM HFM HLMN HFMN
3-phase 60W
15 ・ 18
22
18
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
35
45
55
60
70
80
90
90
130
130
140
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
P.B25 Fig.B-39 3kg
P.B26 Fig.B-44 3kg
Fig.B-40 Fig.B-45
P.B25 Fig.B-40 4kg
P.B26 Fig.B-45 4kg
P.B27 Fig.B-48 4kg
P.B25 Fig.B-43 15kg
P.B27 Fig.B-51 15kg
P.B28 Fig.B-53 4kg
P.B25 Fig.B-41 6kg
P.B26 Fig.B-46 6kg
P.B27 Fig.B-49 6kg
P.B28 Fig.B-54 6kg
P.B25 Fig.B-42 9kg
P.B27 Fig.B-50 9kg
50Hz 60Hz N・m kgf・m N kgf
(Frame No.18) (Frame No.18)
P.B27 Fig.B-47 3kg
Fig.B-48(Frame No.18)
P.B28 Fig.B-52 3kg
Fig.B-53(Frame No.18)
*
4kg 4kg 4kg 4kg
CAD Data: HLM-15(LRT)-T60 CAD Data:
CAD Data:
CAD Data:
CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) As for reduction ratio 1/15 to 1/60, the frame number will be "15" for the standard voltage, "18" for the other voltage. The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B27B26
Flange Mount Type Gearmotor Foot Mount Type Gearmotor with Brake
HFM-15 -10~60-T60Fig.B-44
〔Round Weight 3kg〕
Fig.B-45
〔Round Weight 4kg〕
Fig.B-46
〔Round Weight 6kg〕
LRT
HFM-18 -80~240-T60HFM-18 -10~240-T60W
LRTLRT
HFM-22 -300~450-T60HFM-22 -300~450-T60W
LRTLRT
HFM-22(LRT)-T60 HFM-22(LRT)-T60W
HFM-18(LRT)-T60 HFM-18(LRT)-T60W
HLMN-15 -10~60-T60Fig.B-47
〔Round Weight 3kg〕
Fig.B-50
〔Round Weight 9kg〕
Fig.B-48
〔Round Weight 4kg〕
Fig.B-51
〔Round Weight 15kg〕
Fig.B-49
〔Round Weight 6kg〕
LRT
HLMN-18 -80~240-T60HLMN-18 -10~240-T60W
LRTLRT
HLMN-22 -300~450-T60HLMN-22 -300~450-T60W
LRTLRT
HLMN-32 -1200~1800-T60HLMN-32 -1200~1800-T60W
LRTLRT
HLMN-28 -600~900-T60HLMN-28 -600~900-T60W
LRTLRT
HLMN-28(LRT)-T60 HLMN-28(LRT)-T60W
HLMN-18(LRT)-T60 HLMN-18(LRT)-T60W
HLMN-32(LRT)-T60 HLMN-32(LRT)-T60W
HLMN-22(LRT)-T60 HLMN-22(LRT)-T60W
CAD Data: HFM-15(LRT)-T60 CAD Data: HLMN-15(LRT)-T60CAD Data:
CAD Data:
CAD Data:
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
GTR Mini Series GTR Mini Series
B27B26
Flange Mounted Type Gearmotor Foot Mount Type Gearmotor with Brake
HFM-15 -10~60-T60Fig.B-44
〔Round Weight 3kg〕
Fig.B-45
〔Round Weight 4kg〕
Fig.B-46
〔Round Weight 6kg〕
LRT
HFM-18 -80~240-T60HFM-18 -10~240-T60W
LRTLRT
HFM-22 -300~450-T60HFM-22 -300~450-T60W
LRTLRT
HFM-22(LRT)-T60 HFM-22(LRT)-T60W
HFM-18(LRT)-T60 HFM-18(LRT)-T60W
HLMN-15 -10~60-T60Fig.B-47
〔Round Weight 3kg〕
Fig.B-50
〔Round Weight 9kg〕
Fig.B-48
〔Round Weight 4kg〕
Fig.B-51
〔Round Weight 15kg〕
Fig.B-49
〔Round Weight 6kg〕
LRT
HLMN-18 -80~240-T60HLMN-18 -10~240-T60W
LRTLRT
HLMN-22 -300~450-T60HLMN-22 -300~450-T60W
LRTLRT
HLMN-32 -1200~1800-T60HLMN-32 -1200~1800-T60W
LRTLRT
HLMN-28 -600~900-T60HLMN-28 -600~900-T60W
LRTLRT
HLMN-28(LRT)-T60 HLMN-28(LRT)-T60W
HLMN-18(LRT)-T60 HLMN-18(LRT)-T60W
HLMN-32(LRT)-T60 HLMN-32(LRT)-T60W
HLMN-22(LRT)-T60 HLMN-22(LRT)-T60W
CAD Data: HFM-15(LRT)-T60 CAD Data: HLMN-15(LRT)-T60CAD Data:
CAD Data:
CAD Data:
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
GTR Mini Series GTR Mini Series
B29B28
Flange Mount Type Gearmotor with Brake
Fig.B-53
〔Round Weight 4kg〕
Fig.B-54
〔Round Weight 6kg〕
HFMN-18 -80~240-T60HFMN-18 -10~240-T60W
LRTLRT
HFMN-22 -300~450-T60HFMN-22 -300~450-T60W
LRTLRT
HFMN-15 -10~60-T60Fig.B-52
〔Round Weight 3kg〕
LRT
HFMN-18(LRT)-T60 HFMN-18(LRT)-T60W
HFMN-22(LRT)-T60 HFMN-22(LRT)-T60W
CAD Data: HFMN-15(LRT)-T60
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B29B28
Flange Mounted Type Gearmotor with Brake
Fig.B-53
〔Round Weight 4kg〕
Fig.B-54
〔Round Weight 6kg〕
HFMN-18 -80~240-T60HFMN-18 -10~240-T60W
LRTLRT
HFMN-22 -300~450-T60HFMN-22 -300~450-T60W
LRTLRT
HFMN-15 -10~60-T60Fig.B-52
〔Round Weight 3kg〕
LRT
HFMN-18(LRT)-T60 HFMN-18(LRT)-T60W
HFMN-22(LRT)-T60 HFMN-22(LRT)-T60W
CAD Data: HFMN-15(LRT)-T60
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B31B30
HLM-18 -10~240-T90Fig.B-55
〔Round Weight 4kg〕
Fig.B-59
〔Round Weight 15kg〕
Fig.B-56
〔Round Weight 4kg〕
Fig.B-60
〔Round Weight 15kg〕
Fig.B-57
〔Round Weight 9kg〕
LRT HLM-18 -10~240-T90W
LRT
HLM-28 -300~450-T90LRT Fig.B-58
〔Round Weight 9kg〕
HLM-28 -300~450-T90WLRT
Fig.B-61
〔Round Weight 22kg〕
HLM-40 -1200~1800-T90HLM-40 -1200~1800-T90W
LRTLRT
HLM-32 -600~900-T90WLRTHLM-32 -600~900-T90
LRT
HLM-40(LRT)-T90 HLM-40(LRT)-T90W
90W
18
28
32
40
18
28
32
40
T90 50/60/60
T90W 50/50/60/60
200/200/220
380/400/400/440
0.51/0.48/0.48
0.51/0.48/0.48
0.51/0.48/0.48
0.47/0.47/0.47
0.26/0.26/0.26/0.26
0.26/0.26/0.26/0.26
0.26/0.26/0.26/0.26
0.23/0.23/0.24/0.24
1350/1550/1550
1350/1550/1550
1350/1550/1550
1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1350/1350/1600/1650
E
HLM HFM HLMN HFMN
3-phase 90W
18
40
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
11
14
16
22
27
32
43
54
65
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
108
137
157
216
265
314
421
529
637
45
60
75
90
100
110
120
120
130
130
140
140
140
140
280
280
280
520
520
520
720
720
720
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
2740
2740
2740
5100
5100
5100
7060
7060
7060
P.B31 Fig.B-55
P.B32 Fig.B-62
Fig.B-56 Fig.B-63
P.B31 Fig.B-61 22kg
P.B33 Fig.B-67 22kg
P.B33 Fig.B-65 9kg
P.B33 Fig.B-66 15kg
50Hz 60Hz
(400V)
P.B31 Fig.B-57Fig.B-58
9kg(400V)
P.B31 Fig.B-59Fig.B-60
15kg(400V)
(400V)
P.B33 Fig.B-64 4kg
P.B33 Fig.B-68 4kg
*
*
*
N・m kgf・m N kgf
4kg 4kg
CAD Data: HLM-18(LRT)-T90 CAD Data: HLM-18(LRT)-T90W
CAD Data: HLM-28(LRT)-T90 CAD Data: HLM-28(LRT)-T90W
CAD Data: HLM-32(LRT)-T90 CAD Data: HLM-32(LRT)-T90W
CAD Data:
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76 2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
400
106 43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B31B30
HLM-18 -10~240-T90Fig.B-55
〔Round Weight 4kg〕
Fig.B-59
〔Round Weight 15kg〕
Fig.B-56
〔Round Weight 4kg〕
Fig.B-60
〔Round Weight 15kg〕
Fig.B-57
〔Round Weight 9kg〕
LRT HLM-18 -10~240-T90W
LRT
HLM-28 -300~450-T90LRT Fig.B-58
〔Round Weight 9kg〕
HLM-28 -300~450-T90WLRT
Fig.B-61
〔Round Weight 22kg〕
HLM-40 -1200~1800-T90HLM-40 -1200~1800-T90W
LRTLRT
HLM-32 -600~900-T90WLRTHLM-32 -600~900-T90
LRT
HLM-40(LRT)-T90 HLM-40(LRT)-T90W
90W
18
28
32
40
18
28
32
40
T90 50/60/60
T90W 50/50/60/60
200/200/220
380/400/400/440
0.51/0.48/0.48
0.51/0.48/0.48
0.51/0.48/0.48
0.47/0.47/0.47
0.26/0.26/0.26/0.26
0.26/0.26/0.26/0.26
0.26/0.26/0.26/0.26
0.23/0.23/0.24/0.24
1350/1550/1550
1350/1550/1550
1350/1550/1550
1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1300/1350/1550/1600
1350/1350/1600/1650
E
HLM HFM HLMN HFMN
3-phase 90W
18
40
32
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
11
14
16
22
27
32
43
54
65
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
108
137
157
216
265
314
421
529
637
45
60
75
90
100
110
120
120
130
130
140
140
140
140
280
280
280
520
520
520
720
720
720
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
2740
2740
2740
5100
5100
5100
7060
7060
7060
P.B31 Fig.B-55
P.B32 Fig.B-62
Fig.B-56 Fig.B-63
P.B31 Fig.B-61 22kg
P.B33 Fig.B-67 22kg
P.B33 Fig.B-65 9kg
P.B33 Fig.B-66 15kg
50Hz 60Hz
(400V)
P.B31 Fig.B-57Fig.B-58
9kg(400V)
P.B31 Fig.B-59Fig.B-60
15kg(400V)
(400V)
P.B33 Fig.B-64 4kg
P.B33 Fig.B-68 4kg
*
*
*
N・m kgf・m N kgf
4kg 4kg
CAD Data: HLM-18(LRT)-T90 CAD Data: HLM-18(LRT)-T90W
CAD Data: HLM-28(LRT)-T90 CAD Data: HLM-28(LRT)-T90W
CAD Data: HLM-32(LRT)-T90 CAD Data: HLM-32(LRT)-T90W
CAD Data:
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76 2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
400
106 43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B9.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B33B32
Flange Mount Type Gearmotor
Flange Mount Type Gearmotor with Brake
HFM-18 -10~240-T90Fig.B-62
〔Round Weight 4kg〕
Fig.B-63
〔Round Weight 4kg〕
LRT HFM-18 -10~240-T90W
LRT
HLMN-18 -10~240-T90HLMN-18 -10~240-T90WFig.B-64
〔Round Weight 4kg〕
Fig.B-66
〔Round Weight 15kg〕
Fig.B-65
〔Round Weight 9kg〕
Fig.B-67
〔Round Weight 22kg〕
LRTLRT
HLMN-28 -300~450-T90HLMN-28 -300~450-T90W
LRTLRT
HLMN-40 -1200~1800-T90HLMN-40 -1200~1800-T90W
LRTLRT
HLMN-32 -600~900-T90HLMN-32 -600~900-T90W
LRTLRT
HFMN-18 -10~240-T90HFMN-18 -10~240-T90WFig.B-68
〔Round Weight 4kg〕
LRTLRT
HLMN-18(LRT)-T90 HLMN-18(LRT)-T90W
HLMN-32(LRT)-T90 HLMN-32(LRT)-T90W
HFMN-18(LRT)-T90 HFMN-18(LRT)-T90W
HLMN-28(LRT)-T90 HLMN-28(LRT)-T90W
HLMN-40(LRT)-T90 HLMN-40(LRT)-T90W
Foot Mount Type Gearmotor with Brake
CAD Data: HFM-18(LRT)-T90 CAD Data: HFM-18(LRT)-T90W CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22) Flange Mount type(Up to Frame 22)
GTR Mini Series GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B33B32
Flange Mount Type Gearmotor
Flange Mount Type Gearmotor with Brake
HFM-18 -10~240-T90Fig.B-62
〔Round Weight 4kg〕
Fig.B-63
〔Round Weight 4kg〕
LRT HFM-18 -10~240-T90W
LRT
HLMN-18 -10~240-T90HLMN-18 -10~240-T90WFig.B-64
〔Round Weight 4kg〕
Fig.B-66
〔Round Weight 15kg〕
Fig.B-65
〔Round Weight 9kg〕
Fig.B-67
〔Round Weight 22kg〕
LRTLRT
HLMN-28 -300~450-T90HLMN-28 -300~450-T90W
LRTLRT
HLMN-40 -1200~1800-T90HLMN-40 -1200~1800-T90W
LRTLRT
HLMN-32 -600~900-T90HLMN-32 -600~900-T90W
LRTLRT
HFMN-18 -10~240-T90HFMN-18 -10~240-T90WFig.B-68
〔Round Weight 4kg〕
LRTLRT
HLMN-18(LRT)-T90 HLMN-18(LRT)-T90W
HLMN-32(LRT)-T90 HLMN-32(LRT)-T90W
HFMN-18(LRT)-T90 HFMN-18(LRT)-T90W
HLMN-28(LRT)-T90 HLMN-28(LRT)-T90W
HLMN-40(LRT)-T90 HLMN-40(LRT)-T90W
Foot Mount Type Gearmotor with Brake
CAD Data: HFM-18(LRT)-T90 CAD Data: HFM-18(LRT)-T90W CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22) Flange Mount type(Up to Frame 22)
GTR Mini Series GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B35B34
Right Angle Shaft
Performance TableDimension diagram
GearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E30, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B35B34
Right Angle Shaft
Performance TableDimension diagram
GearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E30, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B37B36
HLM-15 -10~240-S15HLM-15 -10~240-S15WFig.B-69
〔Round Weight 3kg〕
Fig.B-70
〔Round Weight 6kg〕
LRTLRT
HLM-22 -300~1800-S15HLM-22 -300~1800-S15W
LRTLRT
HLM-15(LRT)-S15 HLM-15(LRT)-S15W
HLM-22(LRT)-S15 HLM-22(LRT)-S15W
HFM-15 -10~240-S15HFM-15 -10~240-S15WFig.B-71
〔Round Weight 3kg〕
Fig.B-72
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~1800-S15HFM-22 -300~1800-S15W
LRTLRT
HFM-15(LRT)-S15 HFM-15(LRT)-S15W
HFM-22(LRT)-S15 HFM-22(LRT)-S15W
S15
S15W
50/60
50/60
100/100
200/200
0.39/0.35
0.39/0.35
0.21/0.19
0.21/0.19
1350/1650
1350/1650
1350/1650
1350/1650
15W
5
5
1.2
1.2
15
22
15
22
E
HLM HFM HLMN HFMN
1-phase 15W
15
22
P.B37 Fig.B-69 3kg
P.B37 Fig.B-71 3kg
P.B38 Fig.B-73 3kg
P.B38 Fig.B-75 3kg
P.B37 Fig.B-70 6kg
P.B37 Fig.B-72 6kg
P.B38 Fig.B-74 6kg
P.B38 Fig.B-76 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15W H-Type〔Right Angel Shaft〕 1-Phase 15W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
GTR Mini Series GTR Mini Series
B37B36
HLM-15 -10~240-S15HLM-15 -10~240-S15WFig.B-69
〔Round Weight 3kg〕
Fig.B-70
〔Round Weight 6kg〕
LRTLRT
HLM-22 -300~1800-S15HLM-22 -300~1800-S15W
LRTLRT
HLM-15(LRT)-S15 HLM-15(LRT)-S15W
HLM-22(LRT)-S15 HLM-22(LRT)-S15W
HFM-15 -10~240-S15HFM-15 -10~240-S15WFig.B-71
〔Round Weight 3kg〕
Fig.B-72
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~1800-S15HFM-22 -300~1800-S15W
LRTLRT
HFM-15(LRT)-S15 HFM-15(LRT)-S15W
HFM-22(LRT)-S15 HFM-22(LRT)-S15W
S15
S15W
50/60
50/60
100/100
200/200
0.39/0.35
0.39/0.35
0.21/0.19
0.21/0.19
1350/1650
1350/1650
1350/1650
1350/1650
15W
5
5
1.2
1.2
15
22
15
22
E
HLM HFM HLMN HFMN
1-phase 15W
15
22
P.B37 Fig.B-69 3kg
P.B37 Fig.B-71 3kg
P.B38 Fig.B-73 3kg
P.B38 Fig.B-75 3kg
P.B37 Fig.B-70 6kg
P.B37 Fig.B-72 6kg
P.B38 Fig.B-74 6kg
P.B38 Fig.B-76 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15W H-Type〔Right Angel Shaft〕 1-Phase 15W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
GTR Mini Series GTR Mini Series
B39B38
HLMN-15 -10~240-S15HLMN-15 -10~240-S15WFig.B-73
〔Round Weight 3kg〕
Fig.B-74
〔Round Weight 6kg〕
LRTLRT
HLMN-22 -300~1800-S15HLMN-22 -300~1800-S15W
LRTLRT
HLMN-15(LRT)-S15 HLMN-15(LRT)-S15W
HLMN-22(LRT)-S15 HLMN-22(LRT)-S15W
HFMN-15 -10~240-S15HFMN-15 -10~240-S15WFig.B-75
〔Round Weight 3kg〕
Fig.B-76
〔Round Weight 6kg〕
LRTLRT
HFMN-22 -300~1800-S15HFMN-22 -300~1800-S15W
LRTLRT
HFMN-15(LRT)-S15 HFMN-15(LRT)-S15W
HFMN-22(LRT)-S15 HFMN-22(LRT)-S15W
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B39B38
HLMN-15 -10~240-S15HLMN-15 -10~240-S15WFig.B-73
〔Round Weight 3kg〕
Fig.B-74
〔Round Weight 6kg〕
LRTLRT
HLMN-22 -300~1800-S15HLMN-22 -300~1800-S15W
LRTLRT
HLMN-15(LRT)-S15 HLMN-15(LRT)-S15W
HLMN-22(LRT)-S15 HLMN-22(LRT)-S15W
HFMN-15 -10~240-S15HFMN-15 -10~240-S15WFig.B-75
〔Round Weight 3kg〕
Fig.B-76
〔Round Weight 6kg〕
LRTLRT
HFMN-22 -300~1800-S15HFMN-22 -300~1800-S15W
LRTLRT
HFMN-15(LRT)-S15 HFMN-15(LRT)-S15W
HFMN-22(LRT)-S15 HFMN-22(LRT)-S15W
CAD Data: CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B41B40
Fig.B-77
〔Round Weight 3kg〕
Fig.B-79
〔Round Weight 9kg〕
Fig.B-78
〔Round Weight 6kg〕
HLM-15 -10~240-S25HLM-15 -10~240-S25W
LRTLRT
HLM-22 -300~900-S25HLM-22 -300~900-S25W
LRTLRT
HLM-28 -1200~1800-S25HLM-28 -1200~1800-S25W
LRTLRT
HLM-15(LRT)-S25 HLM-15(LRT)-S25W
HLM-22(LRT)-S25 HLM-22(LRT)-S25W
HLM-28(LRT)-S25 HLM-28(LRT)-S25W
Fig.B-80
〔Round Weight 3kg〕
Fig.B-81
〔Round Weight 6kg〕
HFM-15 -10~240-S25HFM-15 -10~240-S25W
LRTLRT
HFM-22 -300~900-S25HFM-22 -300~900-S25W
LRTLRT
HFM-15(LRT)-S25 HFM-15(LRT)-S25W
HFM-22(LRT)-S25 HFM-22(LRT)-S25W
25W
S25
S25W
50/60
50/60
100/100
200/200
0.48/0.48
0.48/0.48
0.44/0.45
0.26/0.25
0.26/0.25
0.23/0.24
1350/1600
1350/1600
1350/1650
1350/1600
1350/1600
1350/1650
7
7
7
1.7
1.7
1.7
15
22
28
15
22
28
E
HLM HFM HLMN HFMN
1-phase 25W
15
22
28
P.B41 Fig.B-77 3kg
P.B41 Fig.B-80 3kg
P.B42 Fig.B-82 3kg
P.B42 Fig.B-85 3kg
P.B41 Fig.B-78 6kg
P.B41 Fig.B-81 6kg
P.B42 Fig.B-83 6kg
P.B41 Fig.B-79 9kg
P.B42 Fig.B-84 9kg
P.B42 Fig.B-86 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25W H-Type〔Right Angel Shaft〕 1-Phase 25W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B41B40
Fig.B-77
〔Round Weight 3kg〕
Fig.B-79
〔Round Weight 9kg〕
Fig.B-78
〔Round Weight 6kg〕
HLM-15 -10~240-S25HLM-15 -10~240-S25W
LRTLRT
HLM-22 -300~900-S25HLM-22 -300~900-S25W
LRTLRT
HLM-28 -1200~1800-S25HLM-28 -1200~1800-S25W
LRTLRT
HLM-15(LRT)-S25 HLM-15(LRT)-S25W
HLM-22(LRT)-S25 HLM-22(LRT)-S25W
HLM-28(LRT)-S25 HLM-28(LRT)-S25W
Fig.B-80
〔Round Weight 3kg〕
Fig.B-81
〔Round Weight 6kg〕
HFM-15 -10~240-S25HFM-15 -10~240-S25W
LRTLRT
HFM-22 -300~900-S25HFM-22 -300~900-S25W
LRTLRT
HFM-15(LRT)-S25 HFM-15(LRT)-S25W
HFM-22(LRT)-S25 HFM-22(LRT)-S25W
25W
S25
S25W
50/60
50/60
100/100
200/200
0.48/0.48
0.48/0.48
0.44/0.45
0.26/0.25
0.26/0.25
0.23/0.24
1350/1600
1350/1600
1350/1650
1350/1600
1350/1600
1350/1650
7
7
7
1.7
1.7
1.7
15
22
28
15
22
28
E
HLM HFM HLMN HFMN
1-phase 25W
15
22
28
P.B41 Fig.B-77 3kg
P.B41 Fig.B-80 3kg
P.B42 Fig.B-82 3kg
P.B42 Fig.B-85 3kg
P.B41 Fig.B-78 6kg
P.B41 Fig.B-81 6kg
P.B42 Fig.B-83 6kg
P.B41 Fig.B-79 9kg
P.B42 Fig.B-84 9kg
P.B42 Fig.B-86 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
178
6885
65
6464128
8094
22.3
300φ22h6 φ22h6
76
304.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
4-φ6.5
76
300178
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6300
763540
18032 58 90
4035
12
φ22h6 φ22h6
308.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25W H-Type〔Right Angel Shaft〕 1-Phase 25W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B43B42
Fig.B-82
〔Round Weight 3kg〕
Fig.B-84
〔Round Weight 9kg〕
Fig.B-83
〔Round Weight 6kg〕
HLMN-15 -10~240-S25HLMN-15 -10~240-S25W
LRTLRT
HLMN-22 -300~900-S25HLMN-22 -300~900-S25W
LRTLRT
HLMN-28 -1200~1800-S25HLMN-28 -1200~1800-S25W
LRTLRT
HLMN-15(LRT)-S25 HLMN-15(LRT)-S25W
HLMN-22(LRT)-S25 HLMN-22(LRT)-S25W
HLMN-28(LRT)-S25 HLMN-28(LRT)-S25W
Fig.B-85
〔Round Weight 3kg〕
Fig.B-86
〔Round Weight 6kg〕
HFMN-15 -10~240-S25HFMN-15 -10~240-S25W
LRTLRT
HFMN-22 -300~900-S25HFMN-22 -300~900-S25W
LRTLRT
HFMN-15(LRT)-S25 HFMN-15(LRT)-S25W
HFMN-22(LRT)-S25 HFMN-22(LRT)-S25W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B43B42
Fig.B-82
〔Round Weight 3kg〕
Fig.B-84
〔Round Weight 9kg〕
Fig.B-83
〔Round Weight 6kg〕
HLMN-15 -10~240-S25HLMN-15 -10~240-S25W
LRTLRT
HLMN-22 -300~900-S25HLMN-22 -300~900-S25W
LRTLRT
HLMN-28 -1200~1800-S25HLMN-28 -1200~1800-S25W
LRTLRT
HLMN-15(LRT)-S25 HLMN-15(LRT)-S25W
HLMN-22(LRT)-S25 HLMN-22(LRT)-S25W
HLMN-28(LRT)-S25 HLMN-28(LRT)-S25W
Fig.B-85
〔Round Weight 3kg〕
Fig.B-86
〔Round Weight 6kg〕
HFMN-15 -10~240-S25HFMN-15 -10~240-S25W
LRTLRT
HFMN-22 -300~900-S25HFMN-22 -300~900-S25W
LRTLRT
HFMN-15(LRT)-S25 HFMN-15(LRT)-S25W
HFMN-22(LRT)-S25 HFMN-22(LRT)-S25W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B45B44
HLM-15 -10~120-S40HLM-15 -10~120-S40WFig.B-87
〔Round Weight 3kg〕
Fig.B-90
〔Round Weight 9kg〕
Fig.B-88
〔Round Weight 4kg〕
Fig.B-91
〔Round Weight 15kg〕
Fig.B-89
〔Round Weight 6kg〕
LRTLRT
HLM-18 -160~240-S40HLM-18 -160~240-S40W
LRTLRT
HLM-22 -300~450-S40HLM-22 -300~450-S40W
LRTLRT
HLM-32 -1200~1800-S40HLM-32 -1200~1800-S40W
LRTLRT
HLM-28 -600~900-S40HLM-28 -600~900-S40W
LRTLRT
HLM-15(LRT)-S40 HLM-15(LRT)-S40W
HLM-28(LRT)-S40 HLM-28(LRT)-S40W
HLM-18(LRT)-S40 HLM-18(LRT)-S40W
HLM-22(LRT)-S40 HLM-22(LRT)-S40W
HLM-32(LRT)-S40 HLM-32(LRT)-S40W
40W
S40
S40W
50/60
50/60
0.67/0.80
0.61/0.66
0.67/0.80
0.61/0.66
0.61/0.66
0.34/0.33
0.29/0.34
0.34/0.33
0.29/0.34
0.29/0.34
1400/1650
1350/1650
1400/1650
1350/1650
1350/1650
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
12
10
12
10
10
2.5
2.5
2.5
2.5
2.5
15
18
22
28
32
15
18
22
28
32
E
HLM HFM HLMN HFMN
1-phase 40W
15
22
18
32
28
P.B45 Fig.B-87 3kg
P.B46 Fig.B-92 3kg
P.B47 Fig.B-95 3kg
P.B48 Fig.B-100 3kg
P.B45 Fig.B-88 4kg
P.B46 Fig.B-93 4kg
P.B47 Fig.B-96 4kg
P.B45 Fig.B-91 15kg
P.B47 Fig.B-99 15kg
P.B48 Fig.B-101 4kg
P.B45 Fig.B-89 6kg
P.B46 Fig.B-94 6kg
P.B47 Fig.B-97 6kg
P.B45 Fig.B-90 9kg
P.B47 Fig.B-98 9kg
P.B48 Fig.B-102 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B45B44
HLM-15 -10~120-S40HLM-15 -10~120-S40WFig.B-87
〔Round Weight 3kg〕
Fig.B-90
〔Round Weight 9kg〕
Fig.B-88
〔Round Weight 4kg〕
Fig.B-91
〔Round Weight 15kg〕
Fig.B-89
〔Round Weight 6kg〕
LRTLRT
HLM-18 -160~240-S40HLM-18 -160~240-S40W
LRTLRT
HLM-22 -300~450-S40HLM-22 -300~450-S40W
LRTLRT
HLM-32 -1200~1800-S40HLM-32 -1200~1800-S40W
LRTLRT
HLM-28 -600~900-S40HLM-28 -600~900-S40W
LRTLRT
HLM-15(LRT)-S40 HLM-15(LRT)-S40W
HLM-28(LRT)-S40 HLM-28(LRT)-S40W
HLM-18(LRT)-S40 HLM-18(LRT)-S40W
HLM-22(LRT)-S40 HLM-22(LRT)-S40W
HLM-32(LRT)-S40 HLM-32(LRT)-S40W
40W
S40
S40W
50/60
50/60
0.67/0.80
0.61/0.66
0.67/0.80
0.61/0.66
0.61/0.66
0.34/0.33
0.29/0.34
0.34/0.33
0.29/0.34
0.29/0.34
1400/1650
1350/1650
1400/1650
1350/1650
1350/1650
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
12
10
12
10
10
2.5
2.5
2.5
2.5
2.5
15
18
22
28
32
15
18
22
28
32
E
HLM HFM HLMN HFMN
1-phase 40W
15
22
18
32
28
P.B45 Fig.B-87 3kg
P.B46 Fig.B-92 3kg
P.B47 Fig.B-95 3kg
P.B48 Fig.B-100 3kg
P.B45 Fig.B-88 4kg
P.B46 Fig.B-93 4kg
P.B47 Fig.B-96 4kg
P.B45 Fig.B-91 15kg
P.B47 Fig.B-99 15kg
P.B48 Fig.B-101 4kg
P.B45 Fig.B-89 6kg
P.B46 Fig.B-94 6kg
P.B47 Fig.B-97 6kg
P.B45 Fig.B-90 9kg
P.B47 Fig.B-98 9kg
P.B48 Fig.B-102 6kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
216
80
2626
300194
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
4-φ11
15120
33962.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
90
φ32h6 φ32h6
φ127
35876
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type GearmotorParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B47B46
Flange Mount Type Gearmotor Foot Mount Type Gearmotor with BrakeHFM-15 -10~120-S40HFM-15 -10~120-S40WFig.B-92
〔Round Weight 3kg〕
Fig.B-93
〔Round Weight 4kg〕
Fig.B-94
〔Round Weight 6kg〕
LRTLRT
HFM-18 -160~240-S40HFM-18 -160~240-S40W
LRTLRT
HFM-22 -300~450-S40HFM-22 -300~450-S40W
LRTLRT
HFM-15(LRT)-S40 HFM-15(LRT)-S40W
HFM-18(LRT)-S40 HFM-18(LRT)-S40W
HFM-22(LRT)-S40 HFM-22(LRT)-S40W
HLMN-15 -10~120-S40HLMN-15 -10~120-S40WFig.B-95
〔Round Weight 3kg〕
Fig.B-98
〔Round Weight 9kg〕
Fig.B-96
〔Round Weight 4kg〕
Fig.B-99
〔Round Weight 15kg〕
Fig.B-97
〔Round Weight 6kg〕
LRTLRT
HLMN-18 -160~240-S40HLMN-18 -160~240-S40W
LRTLRT
HLMN-22 -300~450-S40HLMN-22 -300~450-S40W
LRTLRT
HLMN-32 -1200~1800-S40HLMN-32 -1200~1800-S40W
LRTLRT
HLMN-28 -600~900-S40HLMN-28 -600~900-S40W
LRTLRT
HLMN-15(LRT)-S40 HLMN-15(LRT)-S40W
HLMN-28(LRT)-S40 HLMN-28(LRT)-S40W
HLMN-18(LRT)-S40 HLMN-18(LRT)-S40W
HLMN-32(LRT)-S40 HLMN-32(LRT)-S40W
HLMN-22(LRT)-S40 HLMN-22(LRT)-S40W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
GTR Mini Series GTR Mini Series
B47B46
Flange Mounted Type Gearmotor Foot Mount Type Gearmotor with BrakeHFM-15 -10~120-S40HFM-15 -10~120-S40WFig.B-92
〔Round Weight 3kg〕
Fig.B-93
〔Round Weight 4kg〕
Fig.B-94
〔Round Weight 6kg〕
LRTLRT
HFM-18 -160~240-S40HFM-18 -160~240-S40W
LRTLRT
HFM-22 -300~450-S40HFM-22 -300~450-S40W
LRTLRT
HFM-15(LRT)-S40 HFM-15(LRT)-S40W
HFM-18(LRT)-S40 HFM-18(LRT)-S40W
HFM-22(LRT)-S40 HFM-22(LRT)-S40W
HLMN-15 -10~120-S40HLMN-15 -10~120-S40WFig.B-95
〔Round Weight 3kg〕
Fig.B-98
〔Round Weight 9kg〕
Fig.B-96
〔Round Weight 4kg〕
Fig.B-99
〔Round Weight 15kg〕
Fig.B-97
〔Round Weight 6kg〕
LRTLRT
HLMN-18 -160~240-S40HLMN-18 -160~240-S40W
LRTLRT
HLMN-22 -300~450-S40HLMN-22 -300~450-S40W
LRTLRT
HLMN-32 -1200~1800-S40HLMN-32 -1200~1800-S40W
LRTLRT
HLMN-28 -600~900-S40HLMN-28 -600~900-S40W
LRTLRT
HLMN-15(LRT)-S40 HLMN-15(LRT)-S40W
HLMN-28(LRT)-S40 HLMN-28(LRT)-S40W
HLMN-18(LRT)-S40 HLMN-18(LRT)-S40W
HLMN-32(LRT)-S40 HLMN-32(LRT)-S40W
HLMN-22(LRT)-S40 HLMN-22(LRT)-S40W
CAD Data: CAD Data:
CAD Data:
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
80
216
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
2730
10
φ18h6 φ18h6
300194
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
17
98
6885
65
6464128
8094
22.3
300
216
80
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40WGearmotor with BrakeGearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
GTR Mini Series GTR Mini Series
B49B48
Flange Mount Type Gearmotor with BrakeHFMN-15 -10~120-S40HFMN-15 -10~120-S40WFig.B-100
〔Round Weight 3kg〕
Fig.B-101
〔Round Weight 4kg〕
Fig.B-102
〔Round Weight 6kg〕
LRTLRT
HFMN-18 -160~240-S40HFMN-18 -160~240-S40W
LRTLRT
HFMN-22 -300~450-S40HFMN-22 -300~450-S40W
LRTLRT
HFMN-15(LRT)-S40 HFMN-15(LRT)-S40W
HFMN-18(LRT)-S40 HFMN-18(LRT)-S40W
HFMN-22(LRT)-S40 HFMN-22(LRT)-S40W
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B49B48
Flange Mounted Type Gearmotor with BrakeHFMN-15 -10~120-S40HFMN-15 -10~120-S40WFig.B-100
〔Round Weight 3kg〕
Fig.B-101
〔Round Weight 4kg〕
Fig.B-102
〔Round Weight 6kg〕
LRTLRT
HFMN-18 -160~240-S40HFMN-18 -160~240-S40W
LRTLRT
HFMN-22 -300~450-S40HFMN-22 -300~450-S40W
LRTLRT
HFMN-15(LRT)-S40 HFMN-15(LRT)-S40W
HFMN-18(LRT)-S40 HFMN-18(LRT)-S40W
HFMN-22(LRT)-S40 HFMN-22(LRT)-S40W
CAD Data:
CAD Data:
CAD Data:
4-φ6.5
300 42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
300
80
216
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
300
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B51B50
HLM-18 -10~240-S60HLM-18 -10~240-S60WFig.B-103
〔Round Weight 4kg〕
Fig.B-105
〔Round Weight 9kg〕
Fig.B-104
〔Round Weight 6kg〕
Fig.B-106
〔Round Weight 15kg〕
LRTLRT
HLM-22 -300~450-S60HLM-22 -300~450-S60W
LRTLRT
HLM-32 -1200~1800-S60HLM-32 -1200~1800-S60W
LRTLRT
HLM-28 -600~900-S60HLM-28 -600~900-S60W
LRTLRT
HLM-18(LRT)-S60 HLM-18(LRT)-S60W
HLM-28(LRT)-S60 HLM-28(LRT)-S60W
HLM-22(LRT)-S60 HLM-22(LRT)-S60W
HLM-32(LRT)-S60 HLM-32(LRT)-S60W
HFM-18 -10~240-S60HFM-18 -10~240-S60WFig.B-107
〔Round Weight 4kg〕
Fig.B-108
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~450-S60HFM-22 -300~450-S60W
LRTLRT
HFM-18(LRT)-S60 HFM-18(LRT)-S60W
HFM-22(LRT)-S60 HFM-22(LRT)-S60W
60W
S60
S60W
50/60
50/60
100/100
200/200
0.90/1.00
0.90/1.10
0.90/1.00
0.90/1.00
0.45/0.48
0.43/0.50
0.45/0.48
0.45/0.48
1350/1600
1300/1500
1350/1600
1350/1600
1350/1600
1300/1500
1350/1600
1350/1600
15
15
15
15
3.5
3.5
3.5
3.5
18
22
28
32
18
22
28
32
E
HLM HFM HLMN HFMN
1-phase 60W
22
18
32
28
P.B51 Fig.B-103 4kg
P.B51 Fig.B-107 4kg
P.B52 Fig.B-109 4kg
P.B51 Fig.B-106 15kg
P.B52 Fig.B-112 15kg
P.B52 Fig.B-113 4kg
P.B51 Fig.B-104 6kg
P.B51 Fig.B-108 6kg
P.B52 Fig.B-110 6kg
P.B52 Fig.B-114 6kg
P.B51 Fig.B-105 9kg
P.B52 Fig.B-111 9kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
35
45
55
60
70
80
90
90
130
130
140
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
*
CAD Data: CAD Data:
CAD Data: CAD Data:
CAD Data: CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 60W H-Type〔Right Angel Shaft〕 1-Phase 60W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B51B50
HLM-18 -10~240-S60HLM-18 -10~240-S60WFig.B-103
〔Round Weight 4kg〕
Fig.B-105
〔Round Weight 9kg〕
Fig.B-104
〔Round Weight 6kg〕
Fig.B-106
〔Round Weight 15kg〕
LRTLRT
HLM-22 -300~450-S60HLM-22 -300~450-S60W
LRTLRT
HLM-32 -1200~1800-S60HLM-32 -1200~1800-S60W
LRTLRT
HLM-28 -600~900-S60HLM-28 -600~900-S60W
LRTLRT
HLM-18(LRT)-S60 HLM-18(LRT)-S60W
HLM-28(LRT)-S60 HLM-28(LRT)-S60W
HLM-22(LRT)-S60 HLM-22(LRT)-S60W
HLM-32(LRT)-S60 HLM-32(LRT)-S60W
HFM-18 -10~240-S60HFM-18 -10~240-S60WFig.B-107
〔Round Weight 4kg〕
Fig.B-108
〔Round Weight 6kg〕
LRTLRT
HFM-22 -300~450-S60HFM-22 -300~450-S60W
LRTLRT
HFM-18(LRT)-S60 HFM-18(LRT)-S60W
HFM-22(LRT)-S60 HFM-22(LRT)-S60W
60W
S60
S60W
50/60
50/60
100/100
200/200
0.90/1.00
0.90/1.10
0.90/1.00
0.90/1.00
0.45/0.48
0.43/0.50
0.45/0.48
0.45/0.48
1350/1600
1300/1500
1350/1600
1350/1600
1350/1600
1300/1500
1350/1600
1350/1600
15
15
15
15
3.5
3.5
3.5
3.5
18
22
28
32
18
22
28
32
E
HLM HFM HLMN HFMN
1-phase 60W
22
18
32
28
P.B51 Fig.B-103 4kg
P.B51 Fig.B-107 4kg
P.B52 Fig.B-109 4kg
P.B51 Fig.B-106 15kg
P.B52 Fig.B-112 15kg
P.B52 Fig.B-113 4kg
P.B51 Fig.B-104 6kg
P.B51 Fig.B-108 6kg
P.B52 Fig.B-110 6kg
P.B52 Fig.B-114 6kg
P.B51 Fig.B-105 9kg
P.B52 Fig.B-111 9kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
35
45
55
60
70
80
90
90
130
130
140
140
140
140
180
180
180
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
1760
1760
1760
2740
2740
2740
5100
5100
5100
*
CAD Data: CAD Data:
CAD Data: CAD Data:
CAD Data: CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 60W H-Type〔Right Angel Shaft〕 1-Phase 60W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B53B52
H-Type〔Right Angel Shaft〕 1-Phase 60WGearmotor with Brake
HLMN-18 -10~240-S60HLMN-18 -10~240-S60WFig.B-109
〔Round Weight 4kg〕
Fig.B-111
〔Round Weight 9kg〕
Fig.B-110
〔Round Weight 6kg〕
Fig.B-112
〔Round Weight 15kg〕
LRTLRT
HLMN-22 -300~450-S60HLMN-22 -300~450-S60W
LRTLRT
HLMN-32 -1200~1800-S60HLMN-32 -1200~1800-S60W
LRTLRT
LRTLRT
HLMN-28 -600~900-S60HLMN-28 -600~900-S60W
HLMN-18(LRT)-S60 HLMN-18(LRT)-S60W
HLMN-28(LRT)-S60 HLMN-28(LRT)-S60W
HLMN-22(LRT)-S60 HLMN-22(LRT)-S60W
HLMN-32(LRT)-S60 HLMN-32(LRT)-S60W
HFMN-18 -10~240-S60HFMN-18 -10~240-S60WFig.B-113
〔Round Weight 4kg〕
Fig.B-114
〔Round Weight 6kg〕
LRTLRT
HFMN-22 -300~450-S60HFMN-22 -300~450-S60W
LRTLRT
HFMN-18(LRT)-S60 HFMN-18(LRT)-S60W
HFMN-22(LRT)-S60 HFMN-22(LRT)-S60W
CAD Data: CAD Data:
CAD Data: CAD Data:
CAD Data: CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B53B52
H-Type〔Right Angel Shaft〕 1-Phase 60WGearmotor with Brake
HLMN-18 -10~240-S60HLMN-18 -10~240-S60WFig.B-109
〔Round Weight 4kg〕
Fig.B-111
〔Round Weight 9kg〕
Fig.B-110
〔Round Weight 6kg〕
Fig.B-112
〔Round Weight 15kg〕
LRTLRT
HLMN-22 -300~450-S60HLMN-22 -300~450-S60W
LRTLRT
HLMN-32 -1200~1800-S60HLMN-32 -1200~1800-S60W
LRTLRT
LRTLRT
HLMN-28 -600~900-S60HLMN-28 -600~900-S60W
HLMN-18(LRT)-S60 HLMN-18(LRT)-S60W
HLMN-28(LRT)-S60 HLMN-28(LRT)-S60W
HLMN-22(LRT)-S60 HLMN-22(LRT)-S60W
HLMN-32(LRT)-S60 HLMN-32(LRT)-S60W
HFMN-18 -10~240-S60HFMN-18 -10~240-S60WFig.B-113
〔Round Weight 4kg〕
Fig.B-114
〔Round Weight 6kg〕
LRTLRT
HFMN-22 -300~450-S60HFMN-22 -300~450-S60W
LRTLRT
HFMN-18(LRT)-S60 HFMN-18(LRT)-S60W
HFMN-22(LRT)-S60 HFMN-22(LRT)-S60W
CAD Data: CAD Data:
CAD Data: CAD Data:
CAD Data: CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300φ22h6 φ22h6
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
342.5
80
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
300
3540
18032 58 90
4035
12
φ22h6 φ22h642
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5
346.5
80
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B55B54
Fig.M-115
〔Round Weight 4kg〕
HLM-18 -10~240-S90HLM-18 -10~240-S90W
LRTLRT
Fig.M-116
〔Round Weight 9kg〕
HLM-28 -300~450-S90HLM-28 -300~450-S90W
LRTLRT
Fig.M-117
〔Round Weight 15kg〕
HLM-32 -600~900-S90HLM-32 -600~900-S90W
LRTLRT
Fig.M-118
〔Round Weight 22kg〕
HLM-40 -1200~1800-S90HLM-40 -1200~1800-S90W
LRTLRT
HLM-18(LRT)-S90 HLM-18(LRT)-S90W
HLM-32(LRT)-S90 HLM-32(LRT)-S90W
HLM-28(LRT)-S90 HLM-28(LRT)-S90W
HLM-40(LRT)-S90 HLM-40(LRT)-S90W
Fig.M-119
〔Round Weight 4kg〕
HFM-18 -10~240-S90HFM-18 -10~240-S90W
LRTLRT
HFM-18(LRT)-S90 HFM-18(LRT)-S90W
90W
S90
S90W
50/60
50/60
100/100
200/200
1.30/1.40
1.30/1.40
1.30/1.40
1.20/1.40
0.65/0.66
0.65/0.66
0.65/0.66
0.59/0.65
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1400/1650
20
20
20
20
5
5
5
5
18
28
32
40
18
28
32
40
E
HLM HFM HLMN HFMN
1-phase 90W
18
40
32
28
P.B55 Fig.B-115 4kg
P.B55 Fig.B-119 4kg
P.B55 Fig.B-118 22kg
P.B56 Fig.B-123 22kg
P.B55 Fig.B-116 9kg
P.B56 Fig.B-121 9kg
P.B55 Fig.B-117 15kg
P.B56 Fig.B-122 15kg
P.B56 Fig.B-120 4kg
P.B56 Fig.B-124 4kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
11
14
16
22
27
32
43
54
65
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
108
137
157
216
265
314
421
529
637
45
60
75
90
100
110
120
120
130
130
140
140
140
140
280
280
280
520
520
520
720
720
720
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
2740
2740
2740
5100
5100
5100
7060
7060
7060
*
*
*
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90W H-Type〔Right Angel Shaft〕 1-Phase 90W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B55B54
Fig.M-115
〔Round Weight 4kg〕
HLM-18 -10~240-S90HLM-18 -10~240-S90W
LRTLRT
Fig.M-116
〔Round Weight 9kg〕
HLM-28 -300~450-S90HLM-28 -300~450-S90W
LRTLRT
Fig.M-117
〔Round Weight 15kg〕
HLM-32 -600~900-S90HLM-32 -600~900-S90W
LRTLRT
Fig.M-118
〔Round Weight 22kg〕
HLM-40 -1200~1800-S90HLM-40 -1200~1800-S90W
LRTLRT
HLM-18(LRT)-S90 HLM-18(LRT)-S90W
HLM-32(LRT)-S90 HLM-32(LRT)-S90W
HLM-28(LRT)-S90 HLM-28(LRT)-S90W
HLM-40(LRT)-S90 HLM-40(LRT)-S90W
Fig.M-119
〔Round Weight 4kg〕
HFM-18 -10~240-S90HFM-18 -10~240-S90W
LRTLRT
HFM-18(LRT)-S90 HFM-18(LRT)-S90W
90W
S90
S90W
50/60
50/60
100/100
200/200
1.30/1.40
1.30/1.40
1.30/1.40
1.20/1.40
0.65/0.66
0.65/0.66
0.65/0.66
0.59/0.65
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1350/1600
1400/1650
20
20
20
20
5
5
5
5
18
28
32
40
18
28
32
40
E
HLM HFM HLMN HFMN
1-phase 90W
18
40
32
28
P.B55 Fig.B-115 4kg
P.B55 Fig.B-119 4kg
P.B55 Fig.B-118 22kg
P.B56 Fig.B-123 22kg
P.B55 Fig.B-116 9kg
P.B56 Fig.B-121 9kg
P.B55 Fig.B-117 15kg
P.B56 Fig.B-122 15kg
P.B56 Fig.B-120 4kg
P.B56 Fig.B-124 4kg
50Hz 60Hz N・m kgf・m N kgf
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
11
14
16
22
27
32
43
54
65
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
108
137
157
216
265
314
421
529
637
45
60
75
90
100
110
120
120
130
130
140
140
140
140
280
280
280
520
520
520
720
720
720
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
2740
2740
2740
5100
5100
5100
7060
7060
7060
*
*
*
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
375.5
94
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.5
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B35.
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90W H-Type〔Right Angel Shaft〕 1-Phase 90W
GearmotorGearmotorGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed or
Totally Enclosed Fan-cooled
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B57B56
Fig.B-120
〔Round Weight 4kg〕
HLMN-18 -10~240-S90HLMN-18 -10~240-S90W
LRTLRT
Fig.B-121
〔Round Weight 9kg〕
HLMN-28 -300~450-S90HLMN-28 -300~450-S90W
LRTLRT
Fig.B-122
〔Round Weight 15kg〕
HLMN-32 -600~900-S90HLMN-32 -600~900-S90W
LRTLRT
Fig.B-123
〔Round Weight 22kg〕
HLMN-40 -1200~1800-S90HLMN-40 -1200~1800-S90W
LRTLRT
HLMN-18(LRT)-S90 HLMN-18(LRT)-S90W
HLMN-32(LRT)-S90 HLMN-32(LRT)-S90W
HLMN-28(LRT)-S90 HLMN-28(LRT)-S90W
HLMN-40(LRT)-S90 HLMN-40(LRT)-S90W
Fig.B-124
〔Round Weight 4kg〕
HFMN-18 -10~240-S90HFMN-18 -10~240-S90W
LRTLRT
HFMN-18(LRT)-S90 HFMN-18(LRT)-S90W
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B57B56
Fig.B-120
〔Round Weight 4kg〕
HLMN-18 -10~240-S90HLMN-18 -10~240-S90W
LRTLRT
Fig.B-121
〔Round Weight 9kg〕
HLMN-28 -300~450-S90HLMN-28 -300~450-S90W
LRTLRT
Fig.B-122
〔Round Weight 15kg〕
HLMN-32 -600~900-S90HLMN-32 -600~900-S90W
LRTLRT
Fig.B-123
〔Round Weight 22kg〕
HLMN-40 -1200~1800-S90HLMN-40 -1200~1800-S90W
LRTLRT
HLMN-18(LRT)-S90 HLMN-18(LRT)-S90W
HLMN-32(LRT)-S90 HLMN-32(LRT)-S90W
HLMN-28(LRT)-S90 HLMN-28(LRT)-S90W
HLMN-40(LRT)-S90 HLMN-40(LRT)-S90W
Fig.B-124
〔Round Weight 4kg〕
HFMN-18 -10~240-S90HFMN-18 -10~240-S90W
LRTLRT
HFMN-18(LRT)-S90 HFMN-18(LRT)-S90W
CAD Data: CAD Data:
CAD Data:
CAD Data:
CAD Data:
2626
300 50.5
113620.5
101
94
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
230.5
300
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
300
375.5
94
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3594
394.5
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
437
110
300
2730
10
φ18h6 φ18h6
300
9425.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
300
230.5
Model Code P.B6
Option P.E110P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90WGearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22) Foot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B59B58
HType
Right Angle Shaft
GearmotorRight Angle Shaft IP-65
Model and Type DesignationStandard Model Lineup
Water-ResistantGearmotorGearmotor with Brake
3-Phase
15W~90W
3 Rated Power Source 200V 50/60Hz, 220V/60Hz
Class E
Direct start
Totally Enclosed non-ventilated
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
SUS420J2
Aluminium die-cast
-10℃~40℃
100% max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
15W~40W
100V 50/60Hz
Class E
Capacitor Start
1-Phase
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Starting Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Case Material
Ambient Humidity
Altitude
Painting Method
Painting Color
Insulation Classification
Protective cooling Method
Output Shaft Material
Ambient Temperature
Installation Location
Environment
B59B58
HType
Right Angle Shaft
GearmotorRight Angle Shaft IP-65
Model and Type DesignationStandard Model Lineup
Water-ResistantGearmotorGearmotor with Brake
3-Phase
15W~90W
3 Rated Power Source 200V 50/60Hz, 220V/60Hz
Class E
Direct start
Totally Enclosed non-ventilated
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
SUS420J2
Aluminium die-cast
-10℃~40℃
100% max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
15W~40W
100V 50/60Hz
Class E
Capacitor Start
1-Phase
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Starting Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Case Material
Ambient Humidity
Altitude
Painting Method
Painting Color
Insulation Classification
Protective cooling Method
Output Shaft Material
Ambient Temperature
Installation Location
Environment
B61B60
⑤Shaft Arrangement
⑥Reduction Ratio
⑦ Motor Designation and Capacity or Standard Volatage/ Frequency
⑧Auxiliary Mark
⑨Spec. Designation
H
L
F
W
V
Output Shaft Diameter
10 : 1/10 ~ 240 : 1/240
T15
T25
T40
T60
T90
S15
S25
S40
Standard Volatage/Frequency
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount
: With Water-resistant(IP65)Motor
: With Water-resistant(IP65)Brake Motor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: Standard Specs.
: Mark for Additional Specs.
(Output Shaft material:SUS420J2)
(Output Shaft material:SUS420J2)
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-Phase 90W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
15
HLW HFW
HLV HFV
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
15
3-Phase 25W
1-Phase 25W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
15
3-Phase 40W
18
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
181-Phase 40W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
183-Phase 60W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/24018
LRT
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupModel and Type DesignationH-Type(Right Angle Shaft) IP-65 Water-Resistant
H-Type Water-resistant(IP65) Gearmotor/Brake Motor are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
Position Indicator for cab tyre cable
Refer to the indication mark list in P. E54 for details.Note: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: R: T:gearhead
Motor
① ② ④ ⑤ ③
L 15 30
⑥
T25
⑦ ⑧ ⑨
HF 18 50 S40H X T6
LT
WV
Type Frame Number Shaft Reduction
RatioMotor Capacity
Auxiliary Mark
Spec. Designation
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
3-Phase 15W
1-Phase 15W
Gearmotor
Gearmotor with Brake
Single-phase of 60W・90W is not available. The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2)
Foot Mount type Flange Mount type
Model and Type Designation
Model and Type Designation
GTR Mini Series
B61B60
⑤Shaft Arrangement
⑥Reduction Ratio
⑦ Motor Designation and Capacity or Standard Volatage/ Frequency
⑧Auxiliary Mark
⑨Spec. Designation
H
L
F
W
V
Output Shaft Diameter
10 : 1/10 ~ 240 : 1/240
T15
T25
T40
T60
T90
S15
S25
S40
Standard Volatage/Frequency
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount
: With Water-resistant(IP65)Motor
: With Water-resistant(IP65)Brake Motor
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: 3-phase 60W
: 3-phase 90W
: 3-phase 15W
: 3-phase 25W
: 3-phase 40W
: Standard Specs.
: Mark for Additional Specs.
(Output Shaft material:SUS420J2)
(Output Shaft material:SUS420J2)
3-phase: 1-phase:
200V/50Hz、200V/60Hz、220V/60Hz 100V/50Hz、100V/60Hz
3-Phase 90W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
15
HLW HFW
HLV HFV
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
15
3-Phase 25W
1-Phase 25W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
15
3-Phase 40W
18
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
181-Phase 40W
1/10 1/15 1/20 1/25 1/30
1/40 1/50 1/60
1/80 1/100 1/120
1/160 1/200 1/240
183-Phase 60W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/24018
LRT
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupModel and Type DesignationH-Type(Right Angle Shaft) IP-65 Water-Resistant
H-Type Water-resistant(IP65) Gearmotor/Brake Motor are classified by codes as shown below. Specify these codes in your inquiry and order.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
Position Indicator for cab tyre cable
Refer to the indication mark list in P. E54 for details.Note: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: R: T:gearhead
Motor
① ② ④ ⑤ ③
L 15 30
⑥
T25
⑦ ⑧ ⑨
HF 18 50 S40H X T6
LT
WV
Type Frame Number Shaft Reduction
RatioMotor Capacity
Auxiliary Mark
Spec. Designation
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
3-Phase 15W
1-Phase 15W
Gearmotor
Gearmotor with Brake
Single-phase of 60W・90W is not available. The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2)
Foot Mount type Flange Mount type
Model and Type Designation
Model and Type Designation
GTR Mini Series
B63B62
Right Angle Shaft IP-65
Performance TableDimension diagram
Water-ResistantGearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
3-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E44, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B63B62
Right Angle Shaft IP-65
Performance TableDimension diagram
Water-ResistantGearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
3-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E44, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B65B64
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
HLW-15 -10~240-T15Fig.B-125
〔Round Weight 3kg〕
LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-T15Fig.B-126
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
HLV-15 -10~240-T15Fig.B-127
〔Round Weight 3kg〕
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-T15Fig.B-128
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
30
6485
5610217
22
559
76
15W 15T15 50/60/60200/200/220 0.14/0.13/0.13 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 15W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
P.B65 Fig.B-125 3kg
P.B65 Fig.B-126 3kg
P.B65 Fig.B-127 3kg
P.B65 Fig.B-128 3kg
50Hz 60Hz N・m kgf・m N kgf
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
CAD Data: HLW-15(LRT)-T15 CAD Data: HFW-15(LRT)-T15
CAD Data: HLV-15(LRT)-T15 CAD Data: HFV-15(LRT)-T15
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 15W H-Type〔Right Angel Shaft〕 3-Phase 15W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B65B64
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
HLW-15 -10~240-T15Fig.B-125
〔Round Weight 3kg〕
LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-T15Fig.B-126
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
HLV-15 -10~240-T15Fig.B-127
〔Round Weight 3kg〕
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-T15Fig.B-128
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
30
6485
5610217
22
559
76
15W 15T15 50/60/60200/200/220 0.14/0.13/0.13 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 15W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
P.B65 Fig.B-125 3kg
P.B65 Fig.B-126 3kg
P.B65 Fig.B-127 3kg
P.B65 Fig.B-128 3kg
50Hz 60Hz N・m kgf・m N kgf
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
CAD Data: HLW-15(LRT)-T15 CAD Data: HFW-15(LRT)-T15
CAD Data: HLV-15(LRT)-T15 CAD Data: HFV-15(LRT)-T15
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 15W H-Type〔Right Angel Shaft〕 3-Phase 15W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B67B66
Fig.B-129
〔Round Weight 3kg〕
HLW-15 -10~240-T25LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-T25Fig.B-130
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
42.534
59
6485
30
5676
9.5
1025
1722.3
Fig.B-131
〔Round Weight 3kg〕
HLV-15 -10~240-T25LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
24
HFV-15 -10~240-T25Fig.B-132
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
φ61.5
34
30
6485
5610217
22
559
76
25W 15T25 50/60/60200/200/220 0.21/0.19/0.19 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 25W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B67 Fig.B-129 3kg
P.B67 Fig.B-130 3kg
P.B67 Fig.B-131 3kg
P.B67 Fig.B-132 3kg
Cab tyre cable φ7.6 2000mm
Cab tyre cable φ7.7 2000mm
Cab tyre cable φ7.7 2000mm
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-T25 CAD Data: HFW-15(LRT)-T25
CAD Data: HLV-15(LRT)-T25 CAD Data: HFV-15(LRT)-T25
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25W H-Type〔Right Angel Shaft〕 3-Phase 25W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B67B66
Fig.B-129
〔Round Weight 3kg〕
HLW-15 -10~240-T25LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-T25Fig.B-130
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
42.534
59
6485
30
5676
9.5
1025
1722.3
Fig.B-131
〔Round Weight 3kg〕
HLV-15 -10~240-T25LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
24
HFV-15 -10~240-T25Fig.B-132
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
φ61.5
34
30
6485
5610217
22
559
76
25W 15T25 50/60/60200/200/220 0.21/0.19/0.19 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 25W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B67 Fig.B-129 3kg
P.B67 Fig.B-130 3kg
P.B67 Fig.B-131 3kg
P.B67 Fig.B-132 3kg
Cab tyre cable φ7.6 2000mm
Cab tyre cable φ7.7 2000mm
Cab tyre cable φ7.7 2000mm
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-T25 CAD Data: HFW-15(LRT)-T25
CAD Data: HLV-15(LRT)-T25 CAD Data: HFV-15(LRT)-T25
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 25W H-Type〔Right Angel Shaft〕 3-Phase 25W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B69B68
HLW-15 -10~120-T40Fig.B-133
〔Round Weight 3kg〕
Fig.B-134
〔Round Weight 4kg〕
LRT HLW-18 -160~240-T40
LRT
4-φ8.5
14874
962626
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
Fig.B-135
〔Round Weight 3kg〕
HFW-15 -10~120-T40LRT Fig.B-136
〔Round Weight 4kg〕
HFW-18 -160~240-T40LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
40W15
18T40 50/60/60200/200/220
0.29/0.27/0.27
0.27/0.26/0.26
1350/1550/1600
1350/1550/1550E
HLW HFW HLV HFV
3-phase 40W
15
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
35
45
55
60
70
80
90
90
100
100
110
140
140
140
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
P.B69 Fig.B-133 3kg
P.B69 Fig.B-135 3kg
P.B70 Fig.B-137 3kg
P.B70 Fig.B-139 3kg
P.B69 Fig.B-134 4kg
P.B69 Fig.B-136 4kg
P.B70 Fig.B-138 4kg
P.B70 Fig.B-140 4kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-T40 CAD Data: HLW-18(LRT)-T40
CAD Data: HFW-15(LRT)-T40 CAD Data: HFW-18(LRT)-T40
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake Water-Resistant Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mounted Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B69B68
HLW-15 -10~120-T40Fig.B-133
〔Round Weight 3kg〕
Fig.B-134
〔Round Weight 4kg〕
LRT HLW-18 -160~240-T40
LRT
4-φ8.5
14874
962626
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
Fig.B-135
〔Round Weight 3kg〕
HFW-15 -10~120-T40LRT Fig.B-136
〔Round Weight 4kg〕
HFW-18 -160~240-T40LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
40W15
18T40 50/60/60200/200/220
0.29/0.27/0.27
0.27/0.26/0.26
1350/1550/1600
1350/1550/1550E
HLW HFW HLV HFV
3-phase 40W
15
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
35
45
55
60
70
80
90
90
100
100
110
140
140
140
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
P.B69 Fig.B-133 3kg
P.B69 Fig.B-135 3kg
P.B70 Fig.B-137 3kg
P.B70 Fig.B-139 3kg
P.B69 Fig.B-134 4kg
P.B69 Fig.B-136 4kg
P.B70 Fig.B-138 4kg
P.B70 Fig.B-140 4kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-T40 CAD Data: HLW-18(LRT)-T40
CAD Data: HFW-15(LRT)-T40 CAD Data: HFW-18(LRT)-T40
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40W H-Type〔Right Angel Shaft〕 3-Phase 40W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake Water-Resistant Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor
Flange Mount Type Gearmotor
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series GTR Mini Series
B71B70
HLV-15 -10~120-T40Fig.B-137
〔Round Weight 3kg〕
Fig.B-138
〔Round Weight 4kg〕
LRT HLV-18 -160~240-T40
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
90 113
76101
6
2624
Fig.B-139
〔Round Weight 3kg〕
HFV-15 -10~120-T40LRT Fig.B-140
〔Round Weight 4kg〕
HFV-18 -160~240-T40LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
30
6485
5610217
22
559
76
CAD Data: HLV-15(LRT)-T40 CAD Data: HLV-18(LRT)-T40
CAD Data: HFV-15(LRT)-T40 CAD Data: HFV-18(LRT)-T40
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40WWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mount Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount typeFoot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B71B70
HLV-15 -10~120-T40Fig.B-137
〔Round Weight 3kg〕
Fig.B-138
〔Round Weight 4kg〕
LRT HLV-18 -160~240-T40
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
90 113
76101
6
2624
Fig.B-139
〔Round Weight 3kg〕
HFV-15 -10~120-T40LRT Fig.B-140
〔Round Weight 4kg〕
HFV-18 -160~240-T40LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
30
6485
5610217
22
559
76
CAD Data: HLV-15(LRT)-T40 CAD Data: HLV-18(LRT)-T40
CAD Data: HFV-15(LRT)-T40 CAD Data: HFV-18(LRT)-T40
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 40WWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake
Flange Mounted Type Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount typeFoot Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
GTR Mini Series
B73B72
HLW-18 -10~240-T60Fig.B-141
〔Round Weight 4kg〕
LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
HLW-18(LRT)-T60 HLW-18(LRT)-T90
Fig.B-142
〔Round Weight 4kg〕
HFW-18 -10~240-T60LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLW-18(LRT)-T60 HLW-18(LRT)-T90
HLV-18 -10~240-T60Fig.B-143
〔Round Weight 4kg〕
LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
113
76101
6
26
90
HLV-18(LRT)-T60 HLV-18(LRT)-T90
Fig.B-144
〔Round Weight 4kg〕
HFV-18 -10~240-T60LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
HFV-18(LRT)-T60 HFV-18(LRT)-T90
60W 18T60 50/60/60200/200/220 0.40/0.36/0.36 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 60W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
35
45
55
60
70
80
90
90
130
130
140
140
140
140
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
P.B73 Fig.B-141 4kg
P.B73 Fig.B-142 4kg
P.B73 Fig.B-143 4kg
P.B73 Fig.B-144 4kg
50Hz 60Hz
*
N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B73B72
HLW-18 -10~240-T60Fig.B-141
〔Round Weight 4kg〕
LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
HLW-18(LRT)-T60 HLW-18(LRT)-T90
Fig.B-142
〔Round Weight 4kg〕
HFW-18 -10~240-T60LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLW-18(LRT)-T60 HLW-18(LRT)-T90
HLV-18 -10~240-T60Fig.B-143
〔Round Weight 4kg〕
LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
113
76101
6
26
90
HLV-18(LRT)-T60 HLV-18(LRT)-T90
Fig.B-144
〔Round Weight 4kg〕
HFV-18 -10~240-T60LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
HFV-18(LRT)-T60 HFV-18(LRT)-T90
60W 18T60 50/60/60200/200/220 0.40/0.36/0.36 1350/1550/1600 E
HLW HFW HLV HFV
3-phase 60W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
35
45
55
60
70
80
90
90
130
130
140
140
140
140
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
P.B73 Fig.B-141 4kg
P.B73 Fig.B-142 4kg
P.B73 Fig.B-143 4kg
P.B73 Fig.B-144 4kg
50Hz 60Hz
*
N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 60W H-Type〔Right Angel Shaft〕 3-Phase 60W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B75B74
Fig.B-147
〔Round Weight 4kg〕
HLV-18 -10~240-T90LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
113
76101
6
26
90
HLV-18(LRT)-T60 HLV-18(LRT)-T90
Fig.B-148
〔Round Weight 4kg〕
HFV-18 -10~240-T90LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
HFV-18(LRT)-T60 HFV-18(LRT)-T90
Fig.B-145
〔Round Weight 4kg〕
HLW-18 -10~240-T90LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
HLW-18(LRT)-T60 HLW-18(LRT)-T90
Fig.B-146
〔Round Weight 4kg〕
HFW-18 -10~240-T90LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLW-18(LRT)-T60 HLW-18(LRT)-T90
90W 18T90 50/60/60200/200/220 0.51/0.48/0.48 1350/1550/1550 E
HLW HFW HLV HFV
3-phase 90W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
45
60
75
90
100
110
120
120
130
130
140
140
140
140
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
P.B75 Fig.B-145 4kg
P.B75 Fig.B-146 4kg
P.B75 Fig.B-147 4kg
P.B75 Fig.B-148 4kg
50Hz 60Hz
*
*
*
N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B75B74
Fig.B-147
〔Round Weight 4kg〕
HLV-18 -10~240-T90LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
65.520.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
113
76101
6
26
90
HLV-18(LRT)-T60 HLV-18(LRT)-T90
Fig.B-148
〔Round Weight 4kg〕
HFV-18 -10~240-T90LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
HFV-18(LRT)-T60 HFV-18(LRT)-T90
Fig.B-145
〔Round Weight 4kg〕
HLW-18 -10~240-T90LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
HLW-18(LRT)-T60 HLW-18(LRT)-T90
Fig.B-146
〔Round Weight 4kg〕
HFW-18 -10~240-T90LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLW-18(LRT)-T60 HLW-18(LRT)-T90
90W 18T90 50/60/60200/200/220 0.51/0.48/0.48 1350/1550/1550 E
HLW HFW HLV HFV
3-phase 90W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.42
0.63
0.85
1.1
1.3
1.7
2.1
2.5
3.2
4.0
4.8
5.5
5.5
5.5
4.12
6.17
8.33
10.8
12.7
16.7
20.6
24.5
31.4
39.2
47.0
53.9
53.9
53.9
45
60
75
90
100
110
120
120
130
130
140
140
140
140
441
588
735
882
980
1080
1180
1180
1270
1270
1370
1370
1370
1370
P.B75 Fig.B-145 4kg
P.B75 Fig.B-146 4kg
P.B75 Fig.B-147 4kg
P.B75 Fig.B-148 4kg
50Hz 60Hz
*
*
*
N・m kgf・m N kgf
CAD Data: CAD Data:
CAD Data: CAD Data:
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B63.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 3-Phase 90W H-Type〔Right Angel Shaft〕 3-Phase 90W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
B77B76
Right Angle Shaft IP-65
Performance TableDimension diagram
Water-ResistantGearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E44, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B77B76
Right Angle Shaft IP-65
Performance TableDimension diagram
Water-ResistantGearmotorGearmotor with Brake
HType
Right Angle Shaft
Gearmotor
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table
shows that in case gearmotors are wired (forward rotation)
according to the diagram shown on P.E44, L-shaft rotates
clockwise while R and T-shafts rotate counterclockwise when
viewing from output shaft side. (Refer to the diagram shown
below.)
【Remarks】
L-shaft R-shaft T-shaft
B79B78
HLW-15 -10~240-S15Fig.B-149
〔Round Weight 3kg〕
LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-S15Fig.B-150
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
HLV-15 -10~240-S15Fig.B-151
〔Round Weight 3kg〕
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-S15Fig.B-152
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
76
30
6485
5610217
59
22
5
15W S15 50/60100/100 0.39/0.35 1350/1650 515 E
HLW HFW HLV HFV
1-phase 15W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B79 Fig.B-149 3kg
P.B79 Fig.B-150 3kg
P.B79 Fig.B-151 3kg
P.B79 Fig.B-152 3kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-S15 CAD Data: HFW-15(LRT)-S15
CAD Data: HLV-15(LRT)-S15 CAD Data: HFV-15(LRT)-S15
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15W H-Type〔Right Angel Shaft〕 1-Phase 15W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B79B78
HLW-15 -10~240-S15Fig.B-149
〔Round Weight 3kg〕
LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-S15Fig.B-150
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
HLV-15 -10~240-S15Fig.B-151
〔Round Weight 3kg〕
LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-S15Fig.B-152
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
76
30
6485
5610217
59
22
5
15W S15 50/60100/100 0.39/0.35 1350/1650 515 E
HLW HFW HLV HFV
1-phase 15W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B79 Fig.B-149 3kg
P.B79 Fig.B-150 3kg
P.B79 Fig.B-151 3kg
P.B79 Fig.B-152 3kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-S15 CAD Data: HFW-15(LRT)-S15
CAD Data: HLV-15(LRT)-S15 CAD Data: HFV-15(LRT)-S15
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15W H-Type〔Right Angel Shaft〕 1-Phase 15W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B81B80
Fig.B-153
〔Round Weight 3kg〕
HLW-15 -10~240-S25LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-S25Fig.B-154
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
Fig.B-155
〔Round Weight 3kg〕
HLV-15 -10~240-S25LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-S25Fig.B-156
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
76
30
6485
5610217
59
22
5
25W S25 50/60/60100/100 0.48/0.48 1350/1600 715 E
HLW HFW HLV HFV
1-phase 25W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B81 Fig.B-153 3kg
P.B81 Fig.B-154 3kg
P.B81 Fig.B-155 3kg
P.B81 Fig.B-156 3kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-S25 CAD Data: HFW-15(LRT)-S25
CAD Data: HLV-15(LRT)-S25 CAD Data: HFV-15(LRT)-S25
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25W H-Type〔Right Angel Shaft〕 1-Phase 25W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B81B80
Fig.B-153
〔Round Weight 3kg〕
HLW-15 -10~240-S25LRT
65
12864
80
8
94
4627 2764
24 24
24244-φ6.5
φ15h6φ15h6
192149.5 42.5
34
68
59
76 98
9.585
522.3 17
Cab tyre cable φ7.6 2000mm
HFW-15 -10~240-S25Fig.B-154
〔Round Weight 3kg〕
LRT
128
φ15h6φ15h6
64
4640
64
9
2724
242427
192149.5
4-φ6.5
Cab tyre cable φ7.6 2000mm
42.534
59
6485
30
5676
9.5
1025
1722.3
Fig.B-155
〔Round Weight 3kg〕
HLV-15 -10~240-S25LRT
φ15h6
4-φ6.5
φ15h6
12864
27 2724
24
24
6446
94
65
80
8
214171.5 42.5
22 34
5922.3
76 98
6885
φ61.517 5
Cab tyre cable φ7.7 2000mm
24
HFV-15 -10~240-S25Fig.B-156
〔Round Weight 3kg〕
LRT
128
φ15h6 φ15h6
6440
64
27
46
24
24
2427
9
214
4-φ6.5
42.5
22.3
171.5
Cab tyre cable φ7.7 2000mm
φ61.5
34
76
30
6485
5610217
59
22
5
25W S25 50/60/60100/100 0.48/0.48 1350/1600 715 E
HLW HFW HLV HFV
1-phase 25W
15
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
35
45
55
60
70
80
90
90
100
100
110
110
110
110
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
P.B81 Fig.B-153 3kg
P.B81 Fig.B-154 3kg
P.B81 Fig.B-155 3kg
P.B81 Fig.B-156 3kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-15(LRT)-S25 CAD Data: HFW-15(LRT)-S25
CAD Data: HLV-15(LRT)-S25 CAD Data: HFV-15(LRT)-S25
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25W H-Type〔Right Angel Shaft〕 1-Phase 25W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B83B82
HLW-18 -10~240-S40Fig.B-157
〔Round Weight 4kg〕
LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
Fig.B-158
〔Round Weight 4kg〕
HFW-18 -10~240-S40LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLV-18 -10~240-S40Fig.B-159
〔Round Weight 4kg〕
LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
20.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
90 113
76101
6
26
65.5
Fig.B-160
〔Round Weight 4kg〕
HFV-18 -10~240-S40LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
40W S40 50/60/60100/100 0.61/0.66 1350/1650 1018 E
HLW HFW HLV HFV
1-phase 40W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
35
45
55
60
70
80
90
90
130
130
140
140
140
140
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
P.B83 Fig.B-157 4kg
P.B83 Fig.B-158 4kg
P.B83 Fig.B-159 4kg
P.B83 Fig.B-160 4kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-18(LRT)-S40 CAD Data: HFW-18(LRT)-S40
CAD Data: HLV-18(LRT)-S40 CAD Data: HFV-18(LRT)-S40
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mounted Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mounted Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B83B82
HLW-18 -10~240-S40Fig.B-157
〔Round Weight 4kg〕
LRT
4-φ8.5
14874
96 26
116
7446
75
3027
3027
9
φ18h6 φ18h6
34
90
76101
113
208157.5
25.7
50.5
65.5
Cab tyre cable φ7.6 2000mm
7.5
620.5
26
Fig.B-158
〔Round Weight 4kg〕
HFW-18 -10~240-S40LRT
φ18h6φ18h6
14874
4874
46
26 3027
2730
104-φ8.5
Cab tyre cable φ7.6 2000mm
208157.5 50.5
34
9025.7 20.5
35
65118
80
65.5
7.5101
6
HLV-18 -10~240-S40Fig.B-159
〔Round Weight 4kg〕
LRT
4-φ8.5
φ18h6 φ18h6
7446
2696
75
74148
116
30 3027 27
9
181 50.5
20.5
231.5
25.7
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
90 113
76101
6
26
65.5
Fig.B-160
〔Round Weight 4kg〕
HFV-18 -10~240-S40LRT
14874
4874
46
φ18h6φ18h6
2627
30
30
10
27
231.550.5181
90
35
80101
6511820.525.7
65.5
4-φ8.5
Cab tyre cable φ7.7 2000mm
φ77
23.5 34
6
40W S40 50/60/60100/100 0.61/0.66 1350/1650 1018 E
HLW HFW HLV HFV
1-phase 40W
18
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/100
1/120
1/160
1/200
1/240
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
35
45
55
60
70
80
90
90
130
130
140
140
140
140
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
P.B83 Fig.B-157 4kg
P.B83 Fig.B-158 4kg
P.B83 Fig.B-159 4kg
P.B83 Fig.B-160 4kg
50Hz 60Hz N・m kgf・m N kgf
CAD Data: HLW-18(LRT)-S40 CAD Data: HFW-18(LRT)-S40
CAD Data: HLV-18(LRT)-S40 CAD Data: HFV-18(LRT)-S40
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B77.
Model Code P.B60
Option P.E110P.E54
Cab tyre cable Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40W H-Type〔Right Angel Shaft〕 1-Phase 40W
Water-Resistant GearmotorWater-Resistant Gearmotor with Brake
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount Type Gearmotor with Brake Flange Mount Type Gearmotor with Brake
Foot Mount Type Gearmotor Flange Mount Type Gearmotor Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
Standard Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
Rated Current (A)
Rated Rotation Speed (rpm)
Insulation Classification
Protective system
Frame No.
Totally Enclosed
Gearmotor Gearmotor with BrakeMotor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable Torque
Output Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
GTR Mini Series
B85B84
Right Angle Shaft
Model and Type DesignationStandard Model Lineup
HType
Right Angle Shaft
Gearmotor
Speed ControlGearmotor
1-Phase
15W~90W
100V 50/60Hz
Class E
Capacitor Start
Totally Enclosed (60~90W models are forced fan attached.)
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
S43C
Aluminium die-cast
-10℃~40℃
85%max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Insulation Classification
Starting Method
Protective cooling Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Output Shaft Material
Case Material
Ambient Temperature
Ambient Humidity
Altitude
Installation Location
Painting Method
Painting Color
Environment
B85B84
Right Angle Shaft
Model and Type DesignationStandard Model Lineup
HType
Right Angle Shaft
Gearmotor
Speed ControlGearmotor
1-Phase
15W~90W
100V 50/60Hz
Class E
Capacitor Start
Totally Enclosed (60~90W models are forced fan attached.)
4
Continuous Rating
Hypoid Gear and Helical Gear
Grease Lubrication(Maintenance Free)
New JIS Key(JIS 1301-1976 class)
S43C
Aluminium die-cast
-10℃~40℃
85%max.(without any dew condensation)
1,000m max.
Indoors
Anion painting, Acrylic paint
Grey(Mansel code: 9B6/0.5)
No restriction in the mounting angle.(horizontally, vertically or heeling angle)
Well ventilated place free from corrosive gas, explosive gas vapor and/or dust.
Motor Part
Ambient Conditions
Painting
Mounting Direction
Speed Reduction Part
Number of phase
Capacity
Power Source
Insulation Classification
Starting Method
Protective cooling Method
Number of Pole
Rating
Reduction Method
Lubrication
Output Shaft
Output Shaft Material
Case Material
Ambient Temperature
Ambient Humidity
Altitude
Installation Location
Painting Method
Painting Color
Environment
B87B86
H
L
F
U
P
Output Shaft Diameter
10 : 1/10~ 1800 : 1/1800
S15
S25
S40
S60
S90
Blank
W
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Speed Control Gearmotor
: With Speed Control Gearmotor
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: P-Type Terminal Box
: Standard Specs.
: Mark for Additional Specs.
1-phase : 100V/50Hz、100V/60Hz
1-phase : 200V/50Hz、200V/60Hz
U-Type(With Controller)
P-Type(Controller Sells Separately)
P-Type(Controller Sells Separately) U-Type
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
15
22
1-Phase 15W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
15
22
28
1-Phase 25W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
18
28
32
1-Phase 40W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
18
28
32
1-Phase 60W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
18
28
32
1/1200 1/1500 1/180040
1-Phase 90W
HLU HFU HLP HFP
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
Controller
■Type DesignationGTR Mini-Series controllers are classified by codes as shown below.
These codes are required for your inquiry and/or order.
Blank L: U-Type
: P-Type0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running
SC: Speed Controller (generic name)
10 : single-phase 100V 20 : single-phase 200V
Function
Voltage
U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors)
Type Voltage Function Motor Type
SC 10 1 LP
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupH-Type(Right Angle Shaft) Model and Type Designation
H-Type Speed Control Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
① ② ④ ⑤ ③
L 15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
HF 22 450 S40H XW C
LT
UP T6
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Position indicator for lead-wire, terminal box
Refer to the indication mark list in P. E54 for details.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. DesignationNote: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: gearhead
Motor
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
(Note 1)
Speed Control Gearmotor
The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2)
Model and Type Designation
Model and Type Designation
GTR Mini Series
B87B86
H
L
F
U
P
Output Shaft Diameter
10 : 1/10~ 1800 : 1/1800
S15
S25
S40
S60
S90
Blank
W
C
Blank
X
: H-Type(Right Angle Shaft)
: Foot Mount
: Flange Mount(Up to Frame 22)
: With Speed Control Gearmotor
: With Speed Control Gearmotor
: 1-phase 15W
: 1-phase 25W
: 1-phase 40W
: 1-phase 60W
: 1-phase 90W
: Standard Specifications
: High Voltage
: P-Type Terminal Box
: Standard Specs.
: Mark for Additional Specs.
1-phase : 100V/50Hz、100V/60Hz
1-phase : 200V/50Hz、200V/60Hz
U-Type(With Controller)
P-Type(Controller Sells Separately)
P-Type(Controller Sells Separately) U-Type
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
15
22
1-Phase 15W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
15
22
28
1-Phase 25W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
18
28
32
1-Phase 40W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450 1/600 1/750 1/900
1/1200 1/1500 1/1800
18
28
32
1-Phase 60W
1/10 1/15 1/20 1/25 1/30 1/40 1/50 1/60
1/80 1/100 1/120 1/160 1/200 1/240
1/300 1/375 1/450
1/600 1/750 1/900
18
28
32
1/1200 1/1500 1/180040
1-Phase 90W
HLU HFU HLP HFP
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
RT
L
Controller
■Type DesignationGTR Mini-Series controllers are classified by codes as shown below.
These codes are required for your inquiry and/or order.
Blank L: U-Type
: P-Type0: variable speed only (U-Type only) 1: variable speed + instant stop 2: variable speed + instant stop + slow start + slow down 3: variable speed + instant stop + slow start + slow down + parallel running
SC: Speed Controller (generic name)
10 : single-phase 100V 20 : single-phase 200V
Function
Voltage
U: U-Type (Attached with gearmotors) P: P-Type (Not included in gearmotors)
Type Voltage Function Motor Type
SC 10 1 LP
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Standard Model LineupH-Type(Right Angle Shaft) Model and Type Designation
H-Type Speed Control Gearmotor are classified by codes as shown below. Specify these codes in your inquiry and order.
① ② ④ ⑤ ③
L 15 30
⑥
T25
⑦ ⑧ ⑨ ⑪ ⑩
HF 22 450 S40H XW C
LT
UP T6
Type Frame Number Shaft Reduction
RatioMotor Capacity Option Auxiliary
MarkSpec.
Designation
Position indicator for lead-wire, terminal box
Refer to the indication mark list in P. E54 for details.
①Series Name
②Classification by Mount Form
③Classification by Motor Type
④Frame No. and Diameter of Output shaft
⑤Shaft Arrangement
⑥Reduction Ratio
⑦Motor Designation and Capacity
⑧⑨Option
⑩Auxiliary Mark
⑪Spec. DesignationNote: Spec. Designation does not appear on
the product type designation in the nameplate. It is specified on the additional numbers in the nameplate.
Output shaft on the left viewing from input shaft side.
Output shaft on the right viewing from input shaft side.
Output shaft on both side viewing from input shaft side.
L: gearhead
Motor
Type Output Shaft Arrangement
Frame Number Reduction Ratio4P Motor Capacity
(Note 1)
Speed Control Gearmotor
The models HFM/HFMN(flange mount type) are available in the frame number 15, 18 and 22. (Not available in the frame number 28, 32, and 40.) The models enclosed with orange color bold line are low torque type. Special care should be given to the allowable torque in the performance table.
Note 1) 2)
Model and Type Designation
Model and Type Designation
GTR Mini Series
B89B88
Right Angle Shaft
Performance TableDimension diagram
Speed ControlGearmotor
HType
Right Angle Shaft
Gearmotor
●
●
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N・m{kgf・m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E30, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)
【Remarks】
L-shaft R-shaft T-shaft
B89B88
Right Angle Shaft
Performance TableDimension diagram
Speed ControlGearmotor
HType
Right Angle Shaft
Gearmotor
●
●
●
●
1-Phase
The output rotation speed is the value corresponds to the motor synchronous speed and the nominal reduction ratio. Allowable torques at high speed (N・m{kgf・m}) indicate the value in the range of high rotating speed(rpm). The percentage(%) at the allowable torque of 50% indicate the percentage against the allowable torque at high speed. In H-Type, 3 types of shaft arragement are available, namely L, R and T. The shaded areas in the performance table shows that in case gearmotors are wired (forward rotation) according to the diagram shown on P.E30, L-shaft rotates clockwise while R and T-shafts rotate counterclockwise when viewing from output shaft side. (Refer to the diagram shown below.)
【Remarks】
L-shaft R-shaft T-shaft
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)
B91B90
HLU-15 -10~240-S15HLU-15 -10~240-S15WHLP-15 -10~240-S15HLP-15 -10~240-S15W
Fig.B-161
〔Round Weight 3kg〕
Fig.B-162LRT
LRTLRTLRT
HLU-22 -300~1800-S15HLU-22 -300~1800-S15WHLP-22 -300~1800-S15HLP-22 -300~1800-S15W
LRT
LRTLRTLRT
CAD Data: HLU-15(LRT)-S15 HLU-15(LRT)-S15W
HLP-15(LRT)-S15 HLP-15(LRT)-S15W 〔Round Weight 6kg〕
CAD Data: HLU-22(LRT)-S15 HLU-22(LRT)-S15W
HLP-22(LRT)-S15 HLP-22(LRT)-S15W
HFU-15 -10~240-S15HFU-15 -10~240-S15WHFP-15 -10~240-S15HFP-15 -10~240-S15W
LRT
LRTLRTLRT
HFU-22 -300~1800-S15HFU-22 -300~1800-S15WHFP-22 -300~1800-S15HFP-22 -300~1800-S15W
LRT
LRTLRTLRT
Fig.B-163 Fig.B-164
〔Round Weight 3kg〕 CAD Data: HFU-15(LRT)-S15 HFU-15(LRT)-S15W 〔Round Weight 6kg〕
CAD Data: HFU-22(LRT)-S15 HFU-22(LRT)-S15W
HFP-15(LRT)-S15 HFP-15(LRT)-S15W
HFP-22(LRT)-S15 HFP-22(LRT)-S15W
15W
S15
S15W
50/60
50/60
100/100
200/200
0.6/0.6
0.6/0.6
0.3/0.3
0.3/0.3
500~1350/550~1650
500~1350/550~1650
600~1400/750~1700
600~1400/750~1700
6
6
1.5
1.5
15
22
15
22
E
■100V ■200V
HLU・HLP HFU・HFP
1-phase 15W
15
22
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
P.B91 Fig.B-161 3kg
P.B91 Fig.B-162 3kg
P.B91 Fig.B-163 6kg
P.B91 Fig.B-164 6kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
70
(100V)
60
(200V)
70
(100V)
60
(200V)
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
189
6885
65
6464128
8094
22.3φ40
300φ22h6 φ22h6
76
315.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
φ40
4-φ6.5
76
300189
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
φ40
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
319.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5φ40
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mounted Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Torque-Rotation Speed Characteristic Graph
1-Phase 15W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
U-Type "U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-type
GTR Mini Series
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)
B91B90
HLU-15 -10~240-S15HLU-15 -10~240-S15WHLP-15 -10~240-S15HLP-15 -10~240-S15W
Fig.B-161
〔Round Weight 3kg〕
Fig.B-162LRT
LRTLRTLRT
HLU-22 -300~1800-S15HLU-22 -300~1800-S15WHLP-22 -300~1800-S15HLP-22 -300~1800-S15W
LRT
LRTLRTLRT
CAD Data: HLU-15(LRT)-S15 HLU-15(LRT)-S15W
HLP-15(LRT)-S15 HLP-15(LRT)-S15W 〔Round Weight 6kg〕
CAD Data: HLU-22(LRT)-S15 HLU-22(LRT)-S15W
HLP-22(LRT)-S15 HLP-22(LRT)-S15W
HFU-15 -10~240-S15HFU-15 -10~240-S15WHFP-15 -10~240-S15HFP-15 -10~240-S15W
LRT
LRTLRTLRT
HFU-22 -300~1800-S15HFU-22 -300~1800-S15WHFP-22 -300~1800-S15HFP-22 -300~1800-S15W
LRT
LRTLRTLRT
Fig.B-163 Fig.B-164
〔Round Weight 3kg〕 CAD Data: HFU-15(LRT)-S15 HFU-15(LRT)-S15W 〔Round Weight 6kg〕
CAD Data: HFU-22(LRT)-S15 HFU-22(LRT)-S15W
HFP-15(LRT)-S15 HFP-15(LRT)-S15W
HFP-22(LRT)-S15 HFP-22(LRT)-S15W
15W
S15
S15W
50/60
50/60
100/100
200/200
0.6/0.6
0.6/0.6
0.3/0.3
0.3/0.3
500~1350/550~1650
500~1350/550~1650
600~1400/750~1700
600~1400/750~1700
6
6
1.5
1.5
15
22
15
22
E
■100V ■200V
HLU・HLP HFU・HFP
1-phase 15W
15
22
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
0.69
0.98
1.27
1.67
1.96
2.65
3.33
3.92
5.00
6.27
7.45
9.80
12.7
14.7
16.7
20.6
25.5
33.3
42.1
50.0
66.6
83.3
98.0
P.B91 Fig.B-161 3kg
P.B91 Fig.B-162 3kg
P.B91 Fig.B-163 6kg
P.B91 Fig.B-164 6kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
70
(100V)
60
(200V)
70
(100V)
60
(200V)
0.07
0.10
0.13
0.17
0.20
0.27
0.34
0.40
0.51
0.64
0.76
1.0
1.3
1.5
1.7
2.1
2.6
3.4
4.3
5.1
6.8
8.5
10
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
180
180
180
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
1760
1760
1760
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
189
6885
65
6464128
8094
22.3φ40
300φ22h6 φ22h6
76
315.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
φ40
4-φ6.5
76
300189
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
φ40
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
319.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5φ40
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 15WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Torque-Rotation Speed Characteristic Graph
1-Phase 15W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
U-Type "U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-Type
GTR Mini Series
B93B92
HLU-15 -10~240-S25HLU-15 -10~240-S25WHLP-15 -10~240-S25HLP-15 -10~240-S25W
LRT
LRTLRTLRT
HLU-22 -300~900-S25HLU-22 -300~900-S25WHLP-22 -300~900-S25HLP-22 -300~900-S25W
LRT
LRTLRTLRT
HLU-28 -1200~1800-S25HLU-28 -1200~1800-S25WHLP-28 -1200~1800-S25HLP-28 -1200~1800-S25W
LRT
LRTLRTLRT
Fig.B-165
Fig.B-167
Fig.B-166
〔Round Weight 3kg〕 CAD Data: HLU-15(LRT)-S25 HLU-15(LRT)-S25W
HLP-15(LRT)-S25 HLP-15(LRT)-S25W 〔Round Weight 6kg〕
CAD Data: HLU-22(LRT)-S25 HLU-22(LRT)-S25W
HLP-22(LRT)-S25 HLP-22(LRT)-S25W
〔Round Weight 9kg〕 CAD Data: HLU-28(LRT)-S25 HLU-28(LRT)-S25W
HLP-28(LRT)-S25 HLP-28(LRT)-S25W
25W
S25
S25W
50/60
50/60
100/100
200/200
0.6/0.6 0.6/0.6 0.7/0.7 0.4/0.4 0.4/0.4 0.4/0.4
750~1350/1000~1650 750~1350/1000~1650 550~1400/650~1650 850~1350/1000~1650 850~1350/1000~1650 600~1350/800~1650
8 8 8 2 2 2
15 22 28 15 22 28
E
■Frame No.15・22/100V ■Frame No.15・22/200V ■Frame No.28/100V ■Frame No.28/200V
HLU・HLP HFU・HFP
1-phase 25W
15
22
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
P.B93 Fig.B-165 3kg
P.B94 Fig.B-168 3kg
P.B93 Fig.B-166 6kg
P.B94 Fig.B-169 6kg
P.B93 Fig.B-167 9kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
50
(100V)
45
(200V)
50
(100V)
45
(200V)
60 (100V) (200V)
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
189
6885
65
6464128
8094
22.3φ40
300φ22h6 φ22h6
76
315.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
φ40
300
4-φ11
15120
35062.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127φ40
500 1000 1500
200
150
100
50
0
50Hz60Hz
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)U-Type "U-Type" and "P-Type" are available
in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-type
Torque-Rotation Speed Characteristic Graph
1-Phase 25W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B93B92
HLU-15 -10~240-S25HLU-15 -10~240-S25WHLP-15 -10~240-S25HLP-15 -10~240-S25W
LRT
LRTLRTLRT
HLU-22 -300~900-S25HLU-22 -300~900-S25WHLP-22 -300~900-S25HLP-22 -300~900-S25W
LRT
LRTLRTLRT
HLU-28 -1200~1800-S25HLU-28 -1200~1800-S25WHLP-28 -1200~1800-S25HLP-28 -1200~1800-S25W
LRT
LRTLRTLRT
Fig.B-165
Fig.B-167
Fig.B-166
〔Round Weight 3kg〕 CAD Data: HLU-15(LRT)-S25 HLU-15(LRT)-S25W
HLP-15(LRT)-S25 HLP-15(LRT)-S25W 〔Round Weight 6kg〕
CAD Data: HLU-22(LRT)-S25 HLU-22(LRT)-S25W
HLP-22(LRT)-S25 HLP-22(LRT)-S25W
〔Round Weight 9kg〕 CAD Data: HLU-28(LRT)-S25 HLU-28(LRT)-S25W
HLP-28(LRT)-S25 HLP-28(LRT)-S25W
25W
S25
S25W
50/60
50/60
100/100
200/200
0.6/0.6 0.6/0.6 0.7/0.7 0.4/0.4 0.4/0.4 0.4/0.4
750~1350/1000~1650 750~1350/1000~1650 550~1400/650~1650 850~1350/1000~1650 850~1350/1000~1650 600~1350/800~1650
8 8 8 2 2 2
15 22 28 15 22 28
E
■Frame No.15・22/100V ■Frame No.15・22/200V ■Frame No.28/100V ■Frame No.28/200V
HLU・HLP HFU・HFP
1-phase 25W
15
22
28
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
P.B93 Fig.B-165 3kg
P.B94 Fig.B-168 3kg
P.B93 Fig.B-166 6kg
P.B94 Fig.B-169 6kg
P.B93 Fig.B-167 9kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
0.11
0.17
0.23
0.28
0.34
0.45
0.56
0.68
0.86
1.1
1.3
1.7
2.1
2.6
2.9
3.6
4.3
5.7
7.1
8.6
11
14
17
1.08
1.67
2.25
2.74
3.33
4.41
5.49
6.66
8.43
10.8
12.7
16.7
20.6
25.5
28.4
35.3
42.1
55.9
69.6
84.3
108
137
167
35
45
55
60
70
80
90
90
100
100
110
110
110
110
180
180
180
180
180
180
280
280
280
343
441
539
588
686
784
882
882
980
980
1080
1080
1080
1080
1760
1760
1760
1760
1760
1760
2740
2740
2740
50
(100V)
45
(200V)
50
(100V)
45
(200V)
60 (100V) (200V)
5
2724
2724
8
2424
42.5
φ15h6 φ15h6
4-φ6.5
300
1776 98
189
6885
65
6464128
8094
22.3φ40
300φ22h6 φ22h6
76
315.5
41.5 15024.5
70106
6
53
18090
4035
4035
90
45 45
12105
901164-φ11
φ114.5
φ40
300
4-φ11
15120
35062.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127φ40
500 1000 1500
200
150
100
50
0
50Hz60Hz
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)U-Type "U-Type" and "P-Type" are available
in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-Type
Torque-Rotation Speed Characteristic Graph
1-Phase 25W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B95B94
HFU-15 -10~240-S25HFU-15 -10~240-S25WHFP-15 -10~240-S25HFP-15 -10~240-S25W
LRT
LRTLRTLRT
HFU-22 -300~900-S25HFU-22 -300~900-S25WHFP-22 -300~900-S25HFP-22 -300~900-S25W
LRT
LRTLRTLRT
Fig.B-168 Fig.B-169
〔Round Weight 3kg〕 CAD Data: HFU-15(LRT)-S25 HFU-15(LRT)-S25W 〔Round Weight 6kg〕
CAD Data: HFU-22(LRT)-S25 HFU-22(LRT)-S25W
HFP-15(LRT)-S25 HFP-15(LRT)-S25W
HFP-22(LRT)-S25 HFP-22(LRT)-S25W
4-φ6.5
76
300189
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
φ40
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
319.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5φ40
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
L-shaft R-shaft T-shaft
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)U-Type "U-Type" and "P-Type" are available
in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-Type
GTR Mini Series
B95B94
HFU-15 -10~240-S25HFU-15 -10~240-S25WHFP-15 -10~240-S25HFP-15 -10~240-S25W
LRT
LRTLRTLRT
HFU-22 -300~900-S25HFU-22 -300~900-S25WHFP-22 -300~900-S25HFP-22 -300~900-S25W
LRT
LRTLRTLRT
Fig.B-168 Fig.B-169
〔Round Weight 3kg〕 CAD Data: HFU-15(LRT)-S25 HFU-15(LRT)-S25W 〔Round Weight 6kg〕
CAD Data: HFU-22(LRT)-S25 HFU-22(LRT)-S25W
HFP-15(LRT)-S25 HFP-15(LRT)-S25W
HFP-22(LRT)-S25 HFP-22(LRT)-S25W
4-φ6.5
76
300189
42.5
30
561025
17
22.3
32
85
32
12824 40 64
2724
2427
9
φ15h6 φ15h6
φ40
300
763540
18032 58 90
4035
12
φ22h6 φ22h6
319.5
42
78
45 45
114
144
4-φ11
41.5 624.5
57
φ114.5φ40
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 25WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
L-shaft R-shaft T-shaft
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)U-Type "U-Type" and "P-Type" are available
in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-Type
GTR Mini Series
B97B96
HLU-18 -10~240-S40HLU-18 -10~240-S40WHLP-18 -10~240-S40HLP-18 -10~240-S40W
Fig.B-170
Fig.B-172
LRT
LRTLRTLRT
HLU-32 -1200~1800-S40HLU-32 -1200~1800-S40WHLP-32 -1200~1800-S40HLP-32 -1200~1800-S40W
LRT
LRTLRTLRT
HLU-28 -300~900-S40HLU-28 -300~900-S40WHLP-28 -300~900-S40HLP-28 -300~900-S40W
LRT
LRTLRTLRT
Fig.B-171
〔Round Weight 4kg〕
CAD Data: HLU-18(LRT)-S40 HLU-18(LRT)-S40W
HLP-18(LRT)-S40 HLP-18(LRT)-S40W 〔Round Weight 9kg〕
CAD Data: HLU-28(LRT)-S40 HLU-28(LRT)-S40W
HLP-28(LRT)-S40 HLP-28(LRT)-S40W
〔Round Weight 15kg〕
CAD Data: HLU-32(LRT)-S40 HLU-32(LRT)-S40W
HLP-32(LRT)-S40 HLP-32(LRT)-S40W
HFU-18 -10~240-S40HFU-18 -10~240-S40WHFP-18 -10~240-S40HFP-18 -10~240-S40W
LRT
LRTLRTLRT
Fig.B-173
〔Round Weight 4kg〕
CAD Data: HFU-18(LRT)-S40 HFU-18(LRT)-S40W
HFP-18(LRT)-S40 HFP-18(LRT)-S40W
40W
S40
S40W
50/60
50/60
100/100
200/200
0.9/0.9 0.9/0.9 0.9/0.9 0.5/0.5 0.5/0.5 0.5/0.5
800~1350/1050~1650 800~1350/1050~1650 800~1350/1050~1650 900~1350/1300~1650 900~1350/1300~1650 900~1350/1300~1650
12 12 12 3 3 3
18 28 32 18 28 32
E
■100V ■200V
HLU・HLP HFU・HFP
1-phase 40W
18
28
32
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
P.B97 Fig.B-170 4kg
P.B97 Fig.B-173 4kg
P.B97 Fig.B-171 9kg
P.B97 Fig.B-172 15kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
280
280
280
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
2740
2740
2740
2740
2740
2740
5100
5100
5100
40 (100V) (200V)
40 (100V) (200V)
40 (100V) (200V)
2626
300205
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
φ40
300
4-φ11
15120
35062.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127φ40
2730
10
φ18h6 φ18h6
300205
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
φ40
300
90
φ32h6 φ32h6
φ127
36976
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35φ40
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mounted Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)
U-Type "U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-type
Torque-Rotation Speed Characteristic Graph
1-Phase 40W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B97B96
HLU-18 -10~240-S40HLU-18 -10~240-S40WHLP-18 -10~240-S40HLP-18 -10~240-S40W
Fig.B-170
Fig.B-172
LRT
LRTLRTLRT
HLU-32 -1200~1800-S40HLU-32 -1200~1800-S40WHLP-32 -1200~1800-S40HLP-32 -1200~1800-S40W
LRT
LRTLRTLRT
HLU-28 -300~900-S40HLU-28 -300~900-S40WHLP-28 -300~900-S40HLP-28 -300~900-S40W
LRT
LRTLRTLRT
Fig.B-171
〔Round Weight 4kg〕
CAD Data: HLU-18(LRT)-S40 HLU-18(LRT)-S40W
HLP-18(LRT)-S40 HLP-18(LRT)-S40W 〔Round Weight 9kg〕
CAD Data: HLU-28(LRT)-S40 HLU-28(LRT)-S40W
HLP-28(LRT)-S40 HLP-28(LRT)-S40W
〔Round Weight 15kg〕
CAD Data: HLU-32(LRT)-S40 HLU-32(LRT)-S40W
HLP-32(LRT)-S40 HLP-32(LRT)-S40W
HFU-18 -10~240-S40HFU-18 -10~240-S40WHFP-18 -10~240-S40HFP-18 -10~240-S40W
LRT
LRTLRTLRT
Fig.B-173
〔Round Weight 4kg〕
CAD Data: HFU-18(LRT)-S40 HFU-18(LRT)-S40W
HFP-18(LRT)-S40 HFP-18(LRT)-S40W
40W
S40
S40W
50/60
50/60
100/100
200/200
0.9/0.9 0.9/0.9 0.9/0.9 0.5/0.5 0.5/0.5 0.5/0.5
800~1350/1050~1650 800~1350/1050~1650 800~1350/1050~1650 900~1350/1300~1650 900~1350/1300~1650 900~1350/1300~1650
12 12 12 3 3 3
18 28 32 18 28 32
E
■100V ■200V
HLU・HLP HFU・HFP
1-phase 40W
18
28
32
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
P.B97 Fig.B-170 4kg
P.B97 Fig.B-173 4kg
P.B97 Fig.B-171 9kg
P.B97 Fig.B-172 15kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
1.76
2.65
3.53
4.41
5.29
7.06
8.82
10.8
13.7
16.7
20.6
26.5
33.3
40.2
45.1
55.9
67.6
90.2
118
137
176
225
274
0.18
0.27
0.36
0.45
0.54
0.72
0.90
1.1
1.4
1.7
2.1
2.7
3.4
4.1
4.6
5.7
6.9
9.2
12
14
18
23
28
35
45
55
60
70
80
90
90
100
100
110
140
140
140
280
280
280
280
280
280
520
520
520
343
441
539
588
686
784
882
882
980
980
1080
1370
1370
1370
2740
2740
2740
2740
2740
2740
5100
5100
5100
40 (100V) (200V)
40 (100V) (200V)
40 (100V) (200V)
2626
300205
50.5
113620.5
101
90
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
φ40
300
4-φ11
15120
35062.5
831
80125
174.54990
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127φ40
2730
10
φ18h6 φ18h6
300205
9025.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
φ40
300
90
φ32h6 φ32h6
φ127
36976
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
35φ40
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 40WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
Totally Enclosed
Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white)
U-Type "U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right.
P-Type
Torque-Rotation Speed Characteristic Graph
1-Phase 40W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B99B98
H-Type〔Right Angel Shaft〕 1-Phase 60WSpeed Control Gearmotor
HLU-18 -10~240-S60HLU-18 -10~240-S60WHLP-18 -10~240-S60HLP-18 -10~240-S60W
LRT
LRTLRTLRT
HLU-32 -1200~1800-S60HLU-32 -1200~1800-S60WHLP-32 -1200~1800-S60HLP-32 -1200~1800-S60W
LRT
LRTLRTLRT
HLU-28 -300~900-S60HLU-28 -300~900-S60WHLP-28 -300~900-S60HLP-28 -300~900-S60W
LRT
LRTLRTLRT
Fig.B-174
Fig.B-176
Fig.B-175
〔Round Weight 4kg〕
CAD Data: HLU-18(LRT)-S60 HLU-18(LRT)-S60W
HLP-18(LRT)-S60 HLP-18(LRT)-S60W 〔Round Weight 9kg〕
CAD Data: HLU-28(LRT)-S60 HLU-28(LRT)-S60W
HLP-28(LRT)-S60 HLP-28(LRT)-S60W
〔Round Weight 15kg〕 CAD Data: HLU-32(LRT)-S60 HLU-32(LRT)-S60W
HLP-32(LRT)-S60 HLP-32(LRT)-S60W
HFU-18 -10~240-S60HFU-18 -10~240-S60WHFP-18 -10~240-S60HFP-18 -10~240-S60W
LRT
LRTLRTLRT
Fig.B-177
〔Round Weight 4kg〕 CAD Data: HFU-18(LRT)-S60 HFU-18(LRT)-S60W
HFP-18(LRT)-S60 HFP-18(LRT)-S60W
■100V ■200V
60W
S60
S60W
50/60
50/60
100/100
200/200
1.0/1.7 1.0/1.7 1.0/1.7 0.8/0.9 0.8/0.9 0.8/0.9
700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650
20 20 20 5 5 5
18 28 32 18 28 32
E Totally Enclosed (forced fan attached)
HLU・HLP HFU・HFP
1-phase 60W
18
28
32
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
35
45
55
60
70
80
90
90
130
130
140
140
140
140
280
280
280
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
2740
2740
2740
2740
2740
2740
5100
5100
5100
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
P.B97 Fig.B-174 4kg
P.B97 Fig.B-177 4kg
P.B97 Fig.B-175 9kg
P.B97 Fig.B-176 15kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
60
(100V)
55
(200V)
60
(100V)
55
(200V)
60 (100V) 55
(200V)
*
2626
300 50.5
113620.5
101
92
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
238.54
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
383.5
92
4
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3592
402.54
2730
10
φ18h6 φ18h6
300
9225.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.54
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mounted Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
U-Type Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white) Lead wire for fan 400mm(black・black)
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.
P-type
Torque-Rotation Speed Characteristic Graph
1-Phase 60W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B99B98
H-Type〔Right Angel Shaft〕 1-Phase 60WSpeed Control Gearmotor
HLU-18 -10~240-S60HLU-18 -10~240-S60WHLP-18 -10~240-S60HLP-18 -10~240-S60W
LRT
LRTLRTLRT
HLU-32 -1200~1800-S60HLU-32 -1200~1800-S60WHLP-32 -1200~1800-S60HLP-32 -1200~1800-S60W
LRT
LRTLRTLRT
HLU-28 -300~900-S60HLU-28 -300~900-S60WHLP-28 -300~900-S60HLP-28 -300~900-S60W
LRT
LRTLRTLRT
Fig.B-174
Fig.B-176
Fig.B-175
〔Round Weight 4kg〕
CAD Data: HLU-18(LRT)-S60 HLU-18(LRT)-S60W
HLP-18(LRT)-S60 HLP-18(LRT)-S60W 〔Round Weight 9kg〕
CAD Data: HLU-28(LRT)-S60 HLU-28(LRT)-S60W
HLP-28(LRT)-S60 HLP-28(LRT)-S60W
〔Round Weight 15kg〕 CAD Data: HLU-32(LRT)-S60 HLU-32(LRT)-S60W
HLP-32(LRT)-S60 HLP-32(LRT)-S60W
HFU-18 -10~240-S60HFU-18 -10~240-S60WHFP-18 -10~240-S60HFP-18 -10~240-S60W
LRT
LRTLRTLRT
Fig.B-177
〔Round Weight 4kg〕 CAD Data: HFU-18(LRT)-S60 HFU-18(LRT)-S60W
HFP-18(LRT)-S60 HFP-18(LRT)-S60W
■100V ■200V
60W
S60
S60W
50/60
50/60
100/100
200/200
1.0/1.7 1.0/1.7 1.0/1.7 0.8/0.9 0.8/0.9 0.8/0.9
700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650 700~1350/800~1650
20 20 20 5 5 5
18 28 32 18 28 32
E Totally Enclosed (forced fan attached)
HLU・HLP HFU・HFP
1-phase 60W
18
28
32
1/ 10
1/ 15
1/ 20
1/ 25
1/ 30
1/ 40
1/ 50
1/ 60
1/ 80
1/ 100
1/ 120
1/ 160
1/ 200
1/ 240
1/ 300
1/ 375
1/ 450
1/ 600
1/ 750
1/ 900
1/1200
1/1500
1/1800
150
100
75
60
50
37.5
30
25
18.8
15
12.5
9.4
7.5
6.3
5
4
3.3
2.5
2
1.7
1.3
1
0.8
180
120
90
72
60
45
36
30
22.5
18
15
11.2
9
7.5
6
4.8
4
3
2.4
2
1.5
1.2
1
35
45
55
60
70
80
90
90
130
130
140
140
140
140
280
280
280
280
280
280
520
520
520
343
441
539
588
686
784
882
882
1270
1270
1370
1370
1370
1370
2740
2740
2740
2740
2740
2740
5100
5100
5100
0.28
0.42
0.56
0.71
0.85
1.1
1.4
1.7
2.1
2.7
3.2
4.3
5.4
5.5
7.2
9.0
11
14
18
22
29
36
43
2.74
4.12
5.49
6.96
8.33
10.8
13.7
16.7
20.6
26.5
31.4
42.1
52.9
53.9
70.6
88.2
108
137
176
216
284
353
421
P.B97 Fig.B-174 4kg
P.B97 Fig.B-177 4kg
P.B97 Fig.B-175 9kg
P.B97 Fig.B-176 15kg
50Hz 60Hz N・m kgf・mN kgf50rpm (%)
60
(100V)
55
(200V)
60
(100V)
55
(200V)
60 (100V) 55
(200V)
*
2626
300 50.5
113620.5
101
92
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
238.54
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
383.5
92
4
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3592
402.54
2730
10
φ18h6 φ18h6
300
9225.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
230.54
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)
L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
U-Type Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white) Lead wire for fan 400mm(black・black)
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.
P-Type
Torque-Rotation Speed Characteristic Graph
1-Phase 60W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B101B100
HLU-18 -10~240-S90HLU-18 -10~240-S90WHLP-18 -10~240-S90HLP-18 -10~240-S90W
Fig.B-178
Fig.B-180
LRT
LRTLRTLRT
HLU-32 -600~900-S90HLU-32 -600~900-S90WHLP-32 -600~900-S90HLP-32 -600~900-S90W
LRT
LRTLRTLRT
HLU-28 -300~450-S90HLU-28 -300~450-S90WHLP-28 -300~450-S90HLP-28 -300~450-S90W
LRT
LRTLRTLRT
Fig.B-179
HLU-40 -1200~1800-S90HLU-40 -1200~1800-S90WHLP-40 -1200~1800-S90HLP-40 -1200~1800-S90W
LRT
LRTLRTLRT
Fig.B-181
〔Round Weight 4kg〕 CAD Data: HLU-18(LRT)-S90 HLU-18(LRT)-S90W
HLP-18(LRT)-S90 HLP-18(LRT)-S90W
〔Round Weight 9kg〕 CAD Data: HLU-32(LRT)-S90 HLU-32(LRT)-S90W
HLP-32(LRT)-S90 HLP-32(LRT)-S90W
〔Round Weight 6kg〕 CAD Data: HLU-28(LRT)-S90 HLU-28(LRT)-S90W
HLP-28(LRT)-S90 HLP-28(LRT)-S90W
〔Round Weight 22kg〕 CAD Data: HLU-40(LRT)-S90 HLU-40(LRT)-S90W
HLP-40(LRT)-S90 HLP-40(LRT)-S90W
HFU-18 -10~240-S90HFU-18 -10~240-S90WHFP-18 -10~240-S90HFP-18 -10~240-S90W
LRT
LRTLRTLRT
Fig.B-182
〔Round Weight 4kg〕 CAD Data: HFU-18(LRT)-S90 HFU-18(LRT)-S90W
HFP-18(LRT)-S90 HFP-18(LRT)-S90W
90W
S90
S90W
50/60
50/60
100/100
200/200
1.4/2.0 1.4/2.0 1.4/2.0 1.4/2.0 0.9/1.0 0.9/1.0 0.9/1.0 1.0/1.1
950~1300/1150~1600 950~1300/1150~1600 950~1300/1150~1600 950~1350/1100~1650 1000~1350/1150~1600 1000~1350/1150~1600 1000~1350/1150~1600 900~1350/1100~1650
26 26 26 26 6.5 6.5 6.5 6.5
18 28 32 40 18 28 32 40
E
■Frame No.18・28・32/100V ■Frame No.18・28・32/200V ■Frame No.40/100V ■Frame No.40/200V
HLU・HLP HFU・HFP
1-phase 90W
18
40
32
28
1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800
150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8
180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1
45 60 75 90 100 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720
441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060
0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65
4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637
P.B101 Fig.B-178 4kg
P.B101 Fig.B-182 4kg
P.B101 Fig.B-179 6kg
P.B101 Fig.B-180 9kg
P.B101 Fig.B-181 22kg
50Hz 60Hz
*
*
*
N・m kgf・mN kgf50rpm (%)
40
(100V)
(200V)
40 (100V) (200V)
40 (100V) (200V)
40 (100V) (200V)
2626
300 50.5
113620.5
101
92
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
238.54
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
383.5
92
4
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3592
402.54
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
444.5
108
4
2730
10
φ18h6 φ18h6
300
9225.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
238.54
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mounted Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
Totally Enclosed (forced fan attached)
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
U-Type Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white) Lead wire for fan 400mm(black・black)
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.
P-type
Torque-Rotation Speed Characteristic Graph
1-Phase 90W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series
B101B100
HLU-18 -10~240-S90HLU-18 -10~240-S90WHLP-18 -10~240-S90HLP-18 -10~240-S90W
Fig.B-178
Fig.B-180
LRT
LRTLRTLRT
HLU-32 -600~900-S90HLU-32 -600~900-S90WHLP-32 -600~900-S90HLP-32 -600~900-S90W
LRT
LRTLRTLRT
HLU-28 -300~450-S90HLU-28 -300~450-S90WHLP-28 -300~450-S90HLP-28 -300~450-S90W
LRT
LRTLRTLRT
Fig.B-179
HLU-40 -1200~1800-S90HLU-40 -1200~1800-S90WHLP-40 -1200~1800-S90HLP-40 -1200~1800-S90W
LRT
LRTLRTLRT
Fig.B-181
〔Round Weight 4kg〕 CAD Data: HLU-18(LRT)-S90 HLU-18(LRT)-S90W
HLP-18(LRT)-S90 HLP-18(LRT)-S90W
〔Round Weight 9kg〕 CAD Data: HLU-32(LRT)-S90 HLU-32(LRT)-S90W
HLP-32(LRT)-S90 HLP-32(LRT)-S90W
〔Round Weight 6kg〕 CAD Data: HLU-28(LRT)-S90 HLU-28(LRT)-S90W
HLP-28(LRT)-S90 HLP-28(LRT)-S90W
〔Round Weight 22kg〕 CAD Data: HLU-40(LRT)-S90 HLU-40(LRT)-S90W
HLP-40(LRT)-S90 HLP-40(LRT)-S90W
HFU-18 -10~240-S90HFU-18 -10~240-S90WHFP-18 -10~240-S90HFP-18 -10~240-S90W
LRT
LRTLRTLRT
Fig.B-182
〔Round Weight 4kg〕 CAD Data: HFU-18(LRT)-S90 HFU-18(LRT)-S90W
HFP-18(LRT)-S90 HFP-18(LRT)-S90W
90W
S90
S90W
50/60
50/60
100/100
200/200
1.4/2.0 1.4/2.0 1.4/2.0 1.4/2.0 0.9/1.0 0.9/1.0 0.9/1.0 1.0/1.1
950~1300/1150~1600 950~1300/1150~1600 950~1300/1150~1600 950~1350/1100~1650 1000~1350/1150~1600 1000~1350/1150~1600 1000~1350/1150~1600 900~1350/1100~1650
26 26 26 26 6.5 6.5 6.5 6.5
18 28 32 40 18 28 32 40
E
■Frame No.18・28・32/100V ■Frame No.18・28・32/200V ■Frame No.40/100V ■Frame No.40/200V
HLU・HLP HFU・HFP
1-phase 90W
18
40
32
28
1/ 10 1/ 15 1/ 20 1/ 25 1/ 30 1/ 40 1/ 50 1/ 60 1/ 80 1/ 100 1/ 120 1/ 160 1/ 200 1/ 240 1/ 300 1/ 375 1/ 450 1/ 600 1/ 750 1/ 900 1/1200 1/1500 1/1800
150 100 75 60 50 37.5 30 25 18.8 15 12.5 9.4 7.5 6.3 5 4 3.3 2.5 2 1.7 1.3 1 0.8
180 120 90 72 60 45 36 30 22.5 18 15 11.2 9 7.5 6 4.8 4 3 2.4 2 1.5 1.2 1
45 60 75 90 100 110 120 120 130 130 140 140 140 140 280 280 280 520 520 520 720 720 720
441 588 735 882 980 1080 1180 1180 1270 1270 1370 1370 1370 1370 2740 2740 2740 5100 5100 5100 7060 7060 7060
0.42 0.63 0.85 1.1 1.3 1.7 2.1 2.5 3.2 4.0 4.8 5.5 5.5 5.5 11 14 16 22 27 32 43 54 65
4.12 6.17 8.33 10.8 12.7 16.7 20.6 24.5 31.4 39.2 47.0 53.9 53.9 53.9 108 137 157 216 265 314 421 529 637
P.B101 Fig.B-178 4kg
P.B101 Fig.B-182 4kg
P.B101 Fig.B-179 6kg
P.B101 Fig.B-180 9kg
P.B101 Fig.B-181 22kg
50Hz 60Hz
*
*
*
N・m kgf・mN kgf50rpm (%)
40
(100V)
(200V)
40 (100V) (200V)
40 (100V) (200V)
40 (100V) (200V)
2626
300 50.5
113620.5
101
92
14874
3027 27
3074
φ18h6 φ18h6
759
961164-φ8.5
25.7
76
238.54
300
4-φ11
15120
62.5
831
80125
174.549
20010045
40 4045
100
φ28h6 φ28h6
50 50100126
φ127
383.5
92
4
300 φ32h6 φ32h6
φ127
76
10
95152
205
240120
55 555050
120
14018
6060 1201504-φ13
58
3592
402.54
300
43242.5
120180
12
90
280140
65 656060
140
20
70140180
70
165
φ40h6 φ40h6
φ142
4-φ15
68.5
444.5
108
4
2730
10
φ18h6 φ18h6
300
9225.7
50.5
35
118620.5 65
40
101
40 4-φ8.5
14826 48 74
3027
238.54
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
50Hz60Hz
500 1000 1500
200
150
100
50
0
Note) The allowable O.H.L indicated are the values in the central position of the output shaft. The models marked with * are low troque type. Be sure to refer to the allowable torque rating in the performance table. Be sure to read the cautions stated on Page B89.
Model Code P.B86
Option P.E110~E112P.E54
Lead-Wire/Terminal Box Position Mark
H-Type〔Right Angel Shaft〕 1-Phase 90WSpeed Control Gearmotor
Performance Table/ Dimension
Performance Table/ Dimension
Flange Mount Type
Foot Mount TypeParallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Speed Control Gearmotor
Standard Motors
Cautions for Safety
Option
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Water- resistant Gearmotor with Brake
Parallel Shaft Performance Table/ Dimension
Right Angle Shaft Performance Table/ Dimension
Concentric Hollow Shaft Concentric Solid Shaft Performance Table/ Dimension
Technical Information
Gearmotor with Brake
Gearmotor with Brake
GT-Type Gearmotor with Brake
Gearmotor with Brake
Gearmotor with Clutch /Brake
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor
Speed Control Gearmotor with Brake
Standard Motors
Cautions for Safety
Option
Water- resistant Gearmotor with Brake
With Water- resistant Brake Motor
With Water- resistant Brake Motor
Parallel Shaft GTR-L Series Performance Table/ Dimension
Reversible Gearmotor with Brake
Foot Mount type Flange Mount type(Up to Frame 22)
■Shaft Arrangement Diagram (Flange Mount)
■Shaft Arrangement Diagram (Foot Mount)L-shaft R-shaft T-shaft
L-shaft R-shaft T-shaft
Totally Enclosed (forced fan attached)
high speed
Standard Voltage (Continuous Rated 4 Poles)
Double Voltage (Continuous Rated 4 Poles)
Motor Specs. CapacityMotor Capacity Designation
Frequency (Hz)
Capacitor (μF)
Voltage (V)
MAX Current (A)
High speed rotation range (rpm)
Insulation Classification
Protective system
Frame No.
Motor Capacity
Reduction Ratio
Frame No.
Output Shaft Rotation Speed (rpm)
Output Shaft Allowable TorqueOutput Shaft Allowable O.H.L
Page, Diagram No. of the Outer Dimension Diagram, Round Weight
U-Type Lead wire with connector 300mm
Motor lead wire 300mm Lead wire for generator 300mm (white・white) Lead wire for fan 400mm(black・black)
"U-Type" and "P-Type" are available in the Speed Control Gearmotor. Dimensions shown in the dimension diagram are all that for the "P-Type". In case of "U-Type", the only difference is the part of lead wire which has a connector as shown in the right. 60W motor is totally enclosed fan-cooled.
P-Type
Torque-Rotation Speed Characteristic Graph
1-Phase 90W
Note) 100% torque shows the allowable torque at high speed.
Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕 Rotation Speed〔rpm〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
Torque〔
%〕
GTR Mini Series