DECK STYLE CURTAIN

DD-0001

D-1

NOT TO SCALE

Revised 02/09/19

SG

STANDARD ROLL DOWN CURTAIN

PLAN VIEW

VINYL CURTAIN DIRECTION OFCURTAIN PULL

TIE-DOWN STRAPS@ 36” O.C.

CURTAIN CURVES OUT 2-1/2” TO THE OUTSIDECREATES A SURE SEAL

ZIPPER ISHIDDEN WHENZIPPED UP

JACKET-TYPEZIPPER

POLE HOOKAVAILABLE IN48” 6-GA.AND 96” 3-GA.

ZIPPERPROTECTIONCOVER

WEATHER FLAP WITH

ZIPPER CLOSURE

VERTICAL (WEATHER FLAP) CLOSURE

VERTICAL (WEATHER FLAP) CLOSURE

ZIPSUP

T2 CUT SHEET

WELD SEAM

48” 6 GAPOLE SHOWN

DEFLECTS H20TO OUTSIDE

T2 TRACK-& TROLLEY ENCLOSURE SYSTEM

T2-0001

D-1

NOT TO SCALE

21 JULY 2014

SG

12”

54”

(SE

AM

)43-1

/2”

(SE

AM

)

TYPICAL CURTAIN PANEL ELEVATION

B

B

3”

TRACK-AND-TROLLEYCURTAIN HEAD TRACKSYSTEM TO ATTACHTO EXIST. STRUCTURE

#2 GROMMETS@ 12” O.C.

DETAIL C

VERTICAL (WEATHER FLAP) CLOSURE

VERTICAL (WEATHER FLAP) CLOSURE

3”

DETAIL A

JACKET-STYLEZIPPER CLOSURE

SEAM

0.020 MIL CLEARFIRE-RESISTANTVINYL

18 OZ COATEDPOLYESTERPANEL

TIE-DOWN STRAPSATTACHED TO STAINLESSSTL. D-RINGS @ 36” O.C.

1-1/2”

17”

12”

AA

ZIPS UP

ZIPS UP

SURE SEAL FLAP

USEPOLE HOOKTO ZIP UP TO TOP

®

.

CURTAIN RETRACTED VIEW

CURTAIN RETRACTED

VELCRO TIE STRAP

T2 TRACK-& TROLLEY ENCLOSURE CURTAIN

T2-0001

D-2

NOT TO SCALE

21 JULY 2014

SG

RINGS LAY FLAT WHEN NOT BEING USED.

®

.

CURVED TRACK# CC - 90 - 16

CROSS SECTION B TRACK ATTACHMENT

T2 TRACK SECURED TO UNDERSIDE OF EAVE W/#12 X 2” PSQ SMS Z AFASTENERS @ 12” O.C.

TRACK #RT-16-10

#2 GROMMETNICKEL PLATED BRASS

VINYL CURTAIN

CROSS SECTION “A” THRU WEATHER FLAP

WEATHER FLAP

8.5 MM WELDED FLAP

NEW STYLE RAIL W/ WELTINGATTACHED W/ #10 X 12 X 1-1/2”HEX HD @ 12” O.C.

3”

A

CURTAIN TIE DOWN DETAIL C

STITCH LINE

#0 GROMMET

LADDER LOCK

TRIGGER SNAP

CLIP & D-RINGS@ MIN 30” O.C.,MAX 48” O.C.

#10 X 16” X 1/2” WOOD,OR1/4” X 1-1/4” MASONRYFASTENERS

KEY T2 TRACK & TROLLEY DETAILS AND CROSS SECTIONS

1.27”

.46”

HOLE PLUG

HEAVY WEIGHTPOLYPROPYLENEWEBBING

KEY T2 TRACK & TROLLEY DETAILS AND CROSS SECTIONS

T2-0001

D-3

NOT TO SCALE

21 JULY 2014

SG

TRACK ATTACHES TOBOARDS RANGINGFROM 2 X 4 TO 2 X 6ON END

90° CURVED TRACK AVAILABLE FOR CORNERS

CURVED TRACK

OTHER FASTENER OPTIONS AVAILABLE FOR DIFFERENT TYPES OF MATERIALS TO ATTACH TRACK

CURTAIN

TROLLY #NR-16-1

JACKET-TYPEZIPPER

ZIPPER PROTECTION COVER

®

.

ONLY IN 2’ RADIUS

ADJUSTABLE HOLD DOWN STRAPS

KEY T2 TRACK & TROLLEY SYSTEM COMPONENTS

DETAIL: TRACK/TROLLEY

NYLON WHEEL

1.06”.56”

1.0

5”

0.25”

.17” Ø ROD

NYLON WHEEL

2.5

7”

1” HOOK

Ø 0.49”

Ø 1.05”

DETAIL: #2 GROMMET, SPUR WASHER & PLUG HOLE - STAINLESS STEEL

TOP VIEW

SIDE ELEVATION

.890”

.532”

.325”

.070”

HOLE PLUG

1.50”

1.0

5”

#2

SPUR WASHER

KEY T2 TRACK & TROLLEY SYSTEM COMPONENTS

T2-0001

D-4

NOT TO SCALE

21 JULY 2014

SG

16 GA

.50”

®

.

DETAIL: LADDER LOCK

1.7

0”

1.40”

1.00”

0.40”

DETAIL: TRIGGER SNAP -

STAINLESS STEEL

STAINLESS STL SPRING

BRASS RIVET

61/64”

1.7031” APPROX

0.2813”

3/16” X 3/16”TYP

1-1

/32”

(1”)

25/3

2”

(3/4

”)

SUPPLIED IN3/4” & 1” EYE

DETAIL: #0XL GROMMET & PLUG HOLE -

STAINLESS STEEL

TOP VIEW

SIDE ELEVATION

.670”

.375”

.360”

.060”

HOLE PLUG

0.6

4”

DETAIL: CLIP & D-RING -

STAINLESS STEEL

Ø 0.26”

0.71”

0.79”

Ø 0.15”

Ø 0.037”

1.11”

TIE DOWN ASSEMBLY

T2-0001

D-5

NOT TO SCALE

21 JULY 2014

SG

SPUR WASHER

®

.

DETAIL: TIE DOWN ASSEMBLY COMPONENTS

1

2

3

4

9

8

7

Order of InstallingCurtains are Left toRight

W/F W/F

6"DETAIL A12" TIE-DOWN STRAPS (T/D)

ATTACHED TO STAINLESSSTL. D-RINGS @ 24”-36” O.C.

CURTAIN DROPPED DOWN

ZIPS DOWN

ZIPS DOWN

18 OZ COATEDPOLYESTERPANEL

0.020 MIL CLEARFLAME RETARDANT(F/R) VINYL

X

X

X

X X X X

5 6

X

X

X

3"T/WC/S

S/P Single Pulley

D/P Double Pulley

W/F Weather Flap

R/C Right Cleat

C/S Cinch Straps

D/R D-Ring

T/W Track and Welting

Z/C Zipper Curtain Connection

F/R Flame RetardantT

I/S Inside Looking Out

O/S Outside Looking In

T/D Tie Down Straps

KEY

DECK STYLE CONTINUOUS CURTAIN

PIPE INSERT

W/F

Z/C

W/F

12”

72

”

6"

TOP VIEW

Z/C

T/W

#0 GROMMETS@ 12” O.C.

0.020 MIL CLEARFIRE-RESISTANT(F/R) VINYL

ZIPS DOWN

CURTAIN DROPPED DOWN

TYPICAL GABLE ROOF CONFIGURATION

C/SB

B

12

3 45

6

ZIPS DOWN

1G2G

O/S

O/S

W/F

GABLE CURTAIN

168"

MA

X

1 2

1G 2G

O/S

AA BB

CURTAIN DROPPED DOWN

1507 N. SAINT JOSEPH ST GONZALES. TX 78629

PH: (512) 791-4679

ENCLOSURE SYSTEM.

2. ENCLOSUREGUY TO PROVIDE ALL MATERIALS AND HARDWARE REQUIRED FOR THE PROPER INSTALLATION OF THE

SYSTEM.

3. GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT BLOCKING

AS REQUIRED BY ENCLOSUREGUY.

TO SECURE TRACK AND OTHER WALL/CEILING MOUNTED ITEMS

1. ENCLOSUREGUY TO FIELD VERIFY, DESIGN, BUILD AND INSTALL A (CUSTOM MADE TO ORDER) RETRACTABLE VINYL ENCLOSURE

REVISIONS:

NUMBER DETAIL DATE

DISCLOSURE STATEMENT:THIS IS AN ORIGINAL DRAWING CREATED BY ENCLOSUREGUY, AND SHALL

AT ALL TIMESREMAIN THE PROPERTY OF THE ENCLOSUREGUY.

THESE DRAWINGS MAY BE USED ONLY INCONNECTION WITH THE PROJECT BEING PLANNED

FOR YOU BY ENCLOSUREGUY. THESE DRAWINGS ARE NOT

TO BE REPRODUCED, USED, COPIED, OR EXHIBITED IN ANY FASHIONEXCEPT BY WRITTEN CONSENT FROM ENCLOSUREGUY. COPYRIGHTS AND INFRINGEMENTS

WILL BE ENFORCED AND PROCECUTED.

DRAWING TITLE:

DRAWING NO.:

PROJECT:

SHEET:

SCALE:

DATE:

DRAWN BY:

GENERAL NOTES

ZIPS DOWN

12”

KNEE WALL STYLE CURTAIN FRONT VIEW

1

2

3

4

9

8

7

Order of InstallingCurtains are Left toRight

W/F W/F

X

X

X

X X X X

5 6

X

X

X

TOP VIEW

12

3 45

6W/F

KNEE WALLCURTAIN

54”

78”

C/ST/W T/W

0.020 MIL CLEARFIRE-RESISTANT(F/R) VINYL

WELD SEAM

CURTAIN DROPPED DOWN

Z/C C/S

ZIPS DOWN

ZIPS DOWN

ZIPS DOWN

3"3"6"

2 3

DROP DOWN KNEE WALL CURTAIN

DD-0001

D-1

NOT TO SCALE

Revised 02/09/19

SG

S/P Single Pulley

D/P Double Pulley

W/F Weather Flap

R/C Right Cleat

C/S Cinch Straps

D/R D-Ring

T/W Track and Welting

Z/C Zipper Curtain Connection

F/R Flame RetardantT

I/S Inside Looking Out

O/S Outside Looking In

T/D Tie Down Straps

KEY

78"

54”

18”

3"

KNEE WALL STYLE CURTAIN SIDE VIEW

PIPE INSERT

JOIST

TIE-DOWN STRAPS (T/D)ATTACHED TO STAINLESSSTL. D-RINGS @ 24”-36” O.C.

T/W

S/P & D/P

I/SO/S

STANDARD ROLL DOWN CURTAIN W/KNEE WALL

O/S

BB BB

ZIPS DOWN

18”

54”

78”

T/WC/S

ZIPS DOWN

3"

1

PIPE INSERT DETAIL A

18 OZ COATEDPOLYESTERPANEL

TIE-DOWN STRAPS (T/D)ATTACHED TO STAINLESSSTL. D-RINGS @ 24”-36” O.C.

12"

Z/C

1507 N. SAINT JOSEPH ST GONZALES. TX 78629

PH: (512) 791-4679

ENCLOSURE SYSTEM.

2. ENCLOSUREGUY TO PROVIDE ALL MATERIALS AND HARDWARE REQUIRED FOR THE PROPER INSTALLATION OF THE

SYSTEM.

3. GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT BLOCKING

AS REQUIRED BY ENCLOSUREGUY.

TO SECURE TRACK AND OTHER WALL/CEILING MOUNTED ITEMS

1. ENCLOSUREGUY TO FIELD VERIFY, DESIGN, BUILD AND INSTALL A (CUSTOM MADE TO ORDER) RETRACTABLE VINYL ENCLOSURE

REVISIONS:

NUMBER DETAIL DATE

DISCLOSURE STATEMENT:THIS IS AN ORIGINAL DRAWING CREATED BY ENCLOSUREGUY, AND SHALL

AT ALL TIMESREMAIN THE PROPERTY OF THE ENCLOSUREGUY.

THESE DRAWINGS MAY BE USED ONLY INCONNECTION WITH THE PROJECT BEING PLANNED

FOR YOU BY ENCLOSUREGUY. THESE DRAWINGS ARE NOT

TO BE REPRODUCED, USED, COPIED, OR EXHIBITED IN ANY FASHIONEXCEPT BY WRITTEN CONSENT FROM ENCLOSUREGUY. COPYRIGHTS AND INFRINGEMENTS

WILL BE ENFORCED AND PROCECUTED.

DRAWING TITLE:

DRAWING NO.:

PROJECT:

SHEET:

SCALE:

DATE:

DRAWN BY:

GENERAL NOTES

1

2

3

4

9

8

7

Order of InstallingCurtains are Left toRight

W/F W/F

X

X

X

X X X X

5 6

X

X

X

W/F

TYPICAL SHED CONFIGURATION

12"TIE-DOWN STRAPSATTACHED TO STAINLESSSTL. D-RINGS @ 36” O.C.

T/W

C/S

6"

0.020 MIL CLEARFIRE-RESISTANT(F/R) VINYL

18 OZ COATEDPOLYESTERPANEL

Z/J

Z/J

STANDARD ROLL DOWN CURTAIN SHED CONFIGURATION

OPTIONAL SHED DROP DOWN CURTAIN

DD-0001

D-2

NOT TO SCALE

Revised 02/09/19

SG

12”

3"

CURTAIN DROPPED DOWN

ZIPS DOWN

ZIPS DOWN

DETAIL A

120"

W/F

C/S

S/P

12" 32"

12”

120"

16"

D/R

R/C

ZIPS DOWN

ZIPS DOWN

CURTAIN ROLLED UP

Cinch Straps Correspond withTie Down D-Rings(Refer to cut schedule)

W/FW/F

S/P D/P

S/P Single Pulley

D/P Double Pulley

W/F Weather Flap

R/C Right Cleat

C/S Cinch Straps

D/R D-Ring

T/W Track and Welting

Z/C Zipper Curtain Connection

F/R Flame RetardantT

I/S Inside Looking Out

O/S Outside Looking In

T/D Tie Down Straps

KEY

TYPICAL INTERMITANT CURTAIN ROLLED UP

1

2

34

5

6

1 2 3

W/F

TOP VIEW

16"

O/S

TO VARY

PIPE INSERTPIPE INSERT

AA BB BB

1507 N. SAINT JOSEPH ST GONZALES. TX 78629

PH: (512) 791-4679

ENCLOSURE SYSTEM.

2. ENCLOSUREGUY TO PROVIDE ALL MATERIALS AND HARDWARE REQUIRED FOR THE PROPER INSTALLATION OF THE

SYSTEM.

3. GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT BLOCKING

AS REQUIRED BY ENCLOSUREGUY.

TO SECURE TRACK AND OTHER WALL/CEILING MOUNTED ITEMS

1. ENCLOSUREGUY TO FIELD VERIFY, DESIGN, BUILD AND INSTALL A (CUSTOM MADE TO ORDER) RETRACTABLE VINYL ENCLOSURE

REVISIONS:

NUMBER DETAIL DATE

DISCLOSURE STATEMENT:THIS IS AN ORIGINAL DRAWING CREATED BY ENCLOSUREGUY, AND SHALL

AT ALL TIMESREMAIN THE PROPERTY OF THE ENCLOSUREGUY.

THESE DRAWINGS MAY BE USED ONLY INCONNECTION WITH THE PROJECT BEING PLANNED

FOR YOU BY ENCLOSUREGUY. THESE DRAWINGS ARE NOT

TO BE REPRODUCED, USED, COPIED, OR EXHIBITED IN ANY FASHIONEXCEPT BY WRITTEN CONSENT FROM ENCLOSUREGUY. COPYRIGHTS AND INFRINGEMENTS

WILL BE ENFORCED AND PROCECUTED.

DRAWING TITLE:

DRAWING NO.:

PROJECT:

SHEET:

SCALE:

DATE:

DRAWN BY:

GENERAL NOTES

CROSS SECTION �B� CONTINUOUS ZIPPER CONNECTION

NEW STYLE RAIL W/ WELTINGATTACHED W/ #10 X 12 X 1-1/2”HEX HD @ 12” O.C.

CURTAIN TIE DOWN DETAIL C

STITCH LINE

#2 GROMMET

LADDER LOCK

TRIGGER SNAP

CLIP & D-RINGS@ MIN 30” O.C.,MAX 48” O.C.

#10 X 16” X 1/2” WOOD,ORMUSHROOMFASTENER

STANDARD ROLL DOWN CURTAIN DETAILS

HOLE PLUG

HEAVY WEIGHTPOLYPROPYLENEWEBBING

DROP DOWN CURTAIN DETAILS AND CROSS SECTIONS

DD-0001

D-3

NOT TO SCALE

Revised 02/09/19

SG

CURTAIN

ADJUSTABLE HOLD DOWN STRAPS

CURTAIN

CURTAIN WELTING - WALL MOUNT DETAIL B

WELTING

CURTAIN TRACK

SPLIT RING

ZIPPER SLIDER

ZIPPER PROTECTION COVER

PIPE

PIPE INSTALLATION TO CURTAIN

PIPECAP

PIPE POCKET

ZIPPER CHAIN

1507 N. SAINT JOSEPH ST GONZALES. TX 78629

PH: (512) 791-4679

ENCLOSURE SYSTEM.

2. ENCLOSUREGUY TO PROVIDE ALL MATERIALS AND HARDWARE REQUIRED FOR THE PROPER INSTALLATION OF THE

SYSTEM.

3. GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT BLOCKING

AS REQUIRED BY ENCLOSUREGUY.

TO SECURE TRACK AND OTHER WALL/CEILING MOUNTED ITEMS

1. ENCLOSUREGUY TO FIELD VERIFY, DESIGN, BUILD AND INSTALL A (CUSTOM MADE TO ORDER) RETRACTABLE VINYL ENCLOSURE

REVISIONS:

NUMBER DETAIL DATE

DISCLOSURE STATEMENT:THIS IS AN ORIGINAL DRAWING CREATED BY ENCLOSUREGUY, AND SHALL

AT ALL TIMESREMAIN THE PROPERTY OF THE ENCLOSUREGUY.

THESE DRAWINGS MAY BE USED ONLY INCONNECTION WITH THE PROJECT BEING PLANNED

FOR YOU BY ENCLOSUREGUY. THESE DRAWINGS ARE NOT

TO BE REPRODUCED, USED, COPIED, OR EXHIBITED IN ANY FASHIONEXCEPT BY WRITTEN CONSENT FROM ENCLOSUREGUY. COPYRIGHTS AND INFRINGEMENTS

WILL BE ENFORCED AND PROCECUTED.

DRAWING TITLE:

DRAWING NO.:

PROJECT:

SHEET:

SCALE:

DATE:

DRAWN BY:

GENERAL NOTES

DETAIL: LADDER LOCK

1.7

0”

1.40”

1.00”

0.40”

DETAIL: #2XL GROMMET -STAINLESS STEEL

TOP VIEW

SIDE ELEVATION

.670”

.375”

.36

0”

.06

0”

HOLE PLUG

TIE DOWN ASSEMBLY

T2-0001

D-4

NOT TO SCALE

Revised 02/09/19

SG

SPUR WASHER

DETAIL: TIE DOWN ASSEMBLY COMPONENTS

DETAIL: TRIGGER SNAP -STAINLESS STEEL

STAINLESS STL SPRING

BRASS RIVET

61/64”

1.7031” APPROX

0.2813”

3/16” X 3/16”TYP

1-1

/32

” (1

”)2

5/3

2”

(3/4

”)

SUPPLIED IN3/4” & 1” EYE

SPUR WASHER

1.2

7”

.46”

DETAIL: ALUMINUM TRACK

WELTING

0.6

4”

DETAIL: CLIP & D-RING - REMOVABLE OR PERMANENT All Non-Corrisive Fasteners: Available in Zinc (standard) or Stainless (up-grade)

Ø 0.26”

0.71”

0.79”

Ø 0.15”

Ø 0.037”

1.11”

1.6

5"

Sidewalk BoltFastener

Sidewalk BoltFastener With D-Ring Removed

Drive Pin Anchor

Removable Wood (seasonal removal not recommended)Screw - #10 x 16 x1-1/2” with 5/16 Dia.

Hex Head & (cast) washer -

Permanent Masonry (standard recommended)Drive Pin Anchor - 1/4” x 1-1/4”

Hex Head ScrewFastener

Washer (cast)

Removable Masonry (High traffic/walk-throughs only)Drop-In Anchor - 1/4” x 1” with 1/4” x 24 x 1/2”

Anchor Hole Plug - Shown when assembly removed

1507 N. SAINT JOSEPH ST GONZALES. TX 78629

PH: (512) 791-4679

ENCLOSURE SYSTEM.

2. ENCLOSUREGUY TO PROVIDE ALL MATERIALS AND HARDWARE REQUIRED FOR THE PROPER INSTALLATION OF THE

SYSTEM.

3. GENERAL CONTRACTOR SHALL PROVIDE SUFFICIENT BLOCKING

AS REQUIRED BY ENCLOSUREGUY.

TO SECURE TRACK AND OTHER WALL/CEILING MOUNTED ITEMS

1. ENCLOSUREGUY TO FIELD VERIFY, DESIGN, BUILD AND INSTALL A (CUSTOM MADE TO ORDER) RETRACTABLE VINYL ENCLOSURE

REVISIONS:

NUMBER DETAIL DATE

DISCLOSURE STATEMENT:THIS IS AN ORIGINAL DRAWING CREATED BY ENCLOSUREGUY, AND SHALL

AT ALL TIMESREMAIN THE PROPERTY OF THE ENCLOSUREGUY.

THESE DRAWINGS MAY BE USED ONLY INCONNECTION WITH THE PROJECT BEING PLANNED

FOR YOU BY ENCLOSUREGUY. THESE DRAWINGS ARE NOT

TO BE REPRODUCED, USED, COPIED, OR EXHIBITED IN ANY FASHIONEXCEPT BY WRITTEN CONSENT FROM ENCLOSUREGUY. COPYRIGHTS AND INFRINGEMENTS

WILL BE ENFORCED AND PROCECUTED.

DRAWING TITLE:

DRAWING NO.:

PROJECT:

SHEET:

SCALE:

DATE:

DRAWN BY:

GENERAL NOTES