2
to pull HDPE pipes easily Standard / Sealed Pulling Heads From Specialists For Professionals
to pull HDPE pipes easily
Standard / Sealed
Pulling Heads
From Specialists For Professionals
Application examples- Attachment of a pull rope - Pulling the pipe into an existing line (at trenchless rehab methods) or into a borehole (at HDD)- Uncoiling of a plastic pipe from a trailer - Pipe movementAccording to the different applications We offer two fundamental types of Pipe Pulling Heads:A) Not sealed (standard version)B) Sealed(designedspecificallyforuse at directional drilling operations)
This Pipe Pulling Head has been developed to have a simple possibility to pull a PEHD pipe in longitudinal direction. These Pipe Pulling Heads are easy to use, reusable and no otherequipmentortoolsareneeded(additionalfusionsforadditionalfillingsoracutintothe plastic pipe are unnecessary). The easy screwing of the Pulling Head into the PE pipe results in a powertight connection and the plastic pipe is pullable in the desired direction.
sectional drawings
StandardVersion
SealedVersion
Description of component parts:1 … Pulling eye with screw jack (with outer thread)2 … upper cone/outer sleeve 3 … expansion-gripper set 4 … „O“-ring set (rubber rings) 5 … expander cone (with internal thread) 6 … PE plastic pipe7 … sealing (only at sealed design)
UseAccordingtothesectionaldrawingsthePipePullingHeadissimplyfittedontothepriorevened end of the plastic pipe. By rotating the pulling eye (1) until tight its screw jack will be rotated into the expander cone (5). In this way the expansion-gripper elements (3) are joggling with the inner side of the plastic pipe (6). It creates a stable connection: An in-creasing of pulling forces puts to a tighter grip. Every one of the parts is solitary available and if required you have the possibility of change. Note:PEplasticpipes(PE80andPE100)arecertifiedfordifferentoperatingpressuresand have accordingly different wall thicknesses. Our Pipe Pulling Heads are coordinated with this and every Pulling Head is usable for some different wall thicknesses (at the specsofeveryPipePullingHeadyoucanfindtheapplicationlimits).
Technical Details
Contact:
ABS Trenchless GmbHOberveischeder Str. 5D-57462 Olpe Germany
Tel.: + 49 27 22 - 98 44 1- 0Fax: + 49 27 22 - 98 44 [email protected]
All
tech
nica
l det
ails
sub
ject
to m
odifi
catio
ns; R
ev. 0
8.20
09
