Standard specifications
Presto MC35/50/70-01-AX20
5th edition: June 2009
NACHI-FUJIKOSHI CORP.
Robot Production Plant
0906, SMCEN-021-005, 001
Table of contents
1. Outline........................................................................................................................ 1
1.1 Robot .................................................................................................................... 1
1.2 AX20 controller...................................................................................................... 1
2. Characteristic ............................................................................................................. 1
2.1 Robot .................................................................................................................... 1
2.2 AX20 controller...................................................................................................... 2
3. Basic specifications.................................................................................................... 3
4. Robot dimensions and working envelope................................................................... 4
5. Details of tool mounting plate ..................................................................................... 5
6. Details of upper part of forearm.................................................................................. 6
7. Installation procedure................................................................................................. 7
7.1 Installation space .................................................................................................. 7
7.2 Accuracy of installation surface............................................................................. 8
7.3 Maximum robot generative force........................................................................... 8
8. Allowable wrist load.................................................................................................... 9
8.1 Torque map ......................................................................................................... 10
8.2 Wrist load conditions........................................................................................... 11
9. Option specifications ................................................................................................ 13
10. Application wiring and piping diagram .................................................................... 15
10.1 Wiring and piping diagram ................................................................................ 15
10.2 Details of base and flame.................................................................................. 16
10.3 Detailed diagram of the connectors .................................................................. 17
11. Bypass Cable ......................................................................................................... 19
11.1 Bypass cable connection outline figure (Option) ............................................... 19
12. Transport procedure............................................................................................... 20
13. Installation (specification which contains a robot) .................................................. 21
14. Paint color .............................................................................................................. 21
15. Warranty................................................................................................................. 21
Page-1
1. Outline “NACHI ROBOT” has used mechatronic techniques, cultivated throughout the last few decades, to supply robots suited for industries utilizing welding, spray painting and the material handling techniques.
1.1 Robot
"Presto MC series" is a compact handling robot with a powerful load capacity. “Presto MC50” is the basic model, and 3 types of robots are featured in the MC series.
Table 1.1 Robot specifications
Load weight
Installation 35 kg 50 kg 70 kg
Floor mount Ceiling mount (option)
Wall mount (option) Angle mount (option)
Presto MC35-01 Presto MC50-01 Presto MC70-01
1.2 AX20 controller
The AX20 controller is high performance robot control equipment based on open concept which used the personal computer as the base. A de facto standard OS (Windows NT embedded+RTOS) is adopted as an operating system. Moreover, safe equipment, such as double emergency stop circuit and 3 position ENABLE SW, is carried as standard. The standard AX controller is divided into two specifications; Domestic (Japan) and Overseas types as shown below. AX20-0000 Japanese domestic specifications AX20-1101 Overseas specification (North American specifications) AX20-2101 Overseas specification (CE specifications)
2. Characteristic
2.1 Robot
1. The swivel interference radius is small enough to make more free space. This fact enables high-density layouts of the robots.
2. It came to be able to handle loading of heavy weights, because the wrist became powerful.
3. Applicability has improved, because the stroke in the back and forth became the maximum in its class.
4. The application that can be applied has extended, because the environmental resistance became IP67 in wrist (standard), IP65 in main body (motor cover option) and IP67 (full cover option).
5. It became easy to add the cables and the hoses for the application by installing “S-Trac" and “A-Trac".
Page-2
2.2 AX20 controller
1. It is compact even if it adds abundant functions.
2. Large-sized LCD of a color graphic display was adopted as the Teaching pendant. Thereby more easy and intelligible operation is attained and large shortening of teaching time can be aimed at.
3. It is possible to build the optimal operating environment for a robot's work system by the customize function of menus, such as various parameter setup and a peripheral equipment setup, or a screen.
4. Advanced motion control and the adoption of full digital servo based on modern control theory realized smooth control at high speed.
5. Loss reduction of a power device was aimed at and improvement in reliability of servo amplifier was realized.
6. It has equipped with safe equipment, such as double emergency stop circuit limit switch (Category 4 conformity) and 3 position ENABLE SW, as standard, and ANSI/RIA 15.06-1999 is supported.
Page-3
3. Basic specifications
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Item Specifications
Robot model Presto MC35-01 Presto MC50-01 Presto MC70-01
Construction Articulated
Number of axis 6
Drive system AC servo motor
J1 ±2.88 rad (±165 °)
J2 +2.97 ~ -0.79 rad (+170 ~ -45 °)
J3 +4.54 ~ -2.55 rad (+260 ~ -146 °)
J4 ±6.28 rad (±360 °)
J5 ±2.18 rad (±125 °)
Max. working envelope
J6 ±7.84 rad (±450 °)
J1 3.23 rad/s (185 °/s) 3.14 rad/s (180 °/s) 3.05 rad/s (175 °/s)
J2 3.14 rad/s (180 °/s) 2.53 rad/s (145 °/s)
J3 3.32 rad/s (190 °/s) 3.14 rad/s (180 °/s) 2.88 rad/s (165 °/s)
J4 5.32 rad/s (305 °/s) 4.45 rad/s (255 °/s) 4.10 rad/s (235 °/s)
J5 5.32 rad/s (305 °/s) 4.45 rad/s (255 °/s) 4.10 rad/s (235 °/s)
Max. speed
J6 7.33 rad/s (420 °/s) 6.46 rad/s (370 °/s) 6.11 rad/s (350 °/s)
Wrist 35 kg 50 kg 70 kg Max. pay load
Forearm 15 kg
J4 160 N・m 210 N・m 300 N・m
J5 160 N・m 210 N・m 300 N・m Allowable static load
torque
J6 90 N・m 130 N・m 150 N・m
J4 16 kg・m2 30 kg・m
2
J5 16 kg・m2 30 kg・m
2
Allowable moment of inertia *2
J6 5 kg・m2 12 kg・m
2
Position repeatability *3 ±0.07 mm
Air pressure 0.49 MPa (5.0 kgf/cm2) or less
Ambient temperature 0 ~ 45 ℃
Robot type *2 Floor mount
Body IP54 (standard), IP65 (motor cover option), IP67 (full cover option)Environmental resistance*3 Wrist IP67 (standard)
Robot mass 640 kg
*1: This value changes by placement and load conditions of a wrist. *2: Ceiling mount, wall mount and angle mount are the options. *3: Liquid such as organic compound, acidity, alkalinity, chlorine or gasoline cutting fluid which deteriorates the seal material are not available to use.
※ The specification and externals described in this specifications might change without a previous
notice for the improvement.
Page-4
4. Robot dimensions and working envelope
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 4.1 Robot dimensions and working envelope
(option)
Page-5
5. Details of tool mounting plate For the end effecter fixing bolts, use the mounting P.C.D. shown in Fig. 5.1.
Caution! Be sure to screw the M8 end effecter fixing bolts in the wrist not deeper than the screw depth in the mounting face. Screwing the bolts deeper than the screw depth may damage the wrist.
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 5.1 Details of end effector mounting section
Page-6
6. Details of upper part of forearm Ancillary equipment can be mounted to the upper part of robot forearm.
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 6.1 Details of upper part of forearm
TAP DEPTH TAP DEPTH
APPLICATION EQUIPMENT AREA
TAP DEPTH TAP DEPTH
(THE OPPOSITE SIDE IS
THE SAME)
(THE OPPOSITE SIDE IS
THE SAME)
Page-7
7. Installation procedure
7.1 Installation space
To install the robot, lock the swiveling base of the robot.
Caution! The mechanical stopper end is located in a position exceeding the specified
working envelope (software limit) of the J1 axis by 4°. To install the safety fence, with consideration given to the wrist configuration and the shape of end effector.
Danger! On the J1, J2, and J3 axes, the robot working envelope can be regulated for safety (optional function). Since optional parts should be installed to enable this function, do not independently move the standard parts (e.g. mechanical stopper).
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 7.1 Robot installation space
REF
REF
TAP
Page-8
7.2 Accuracy of installation surface
In order to install the robot, strictly observe precautions listed below to cause no deformation in the swivel base.
Precautions
1. Make the deviation from the flatness of the 4 plates on the robot installation surface fall within 0.5 mm.
2. Make the deviation in height between the 4 places of each base plate installation surface and the robot
installation surface fall in the range of 0.5 mm (±0.25 mm).
Fig. 7.2 Accuracy of robot installation surface
3. If the 2 precautions above cannot be observed, use jack bolts to bring the four places into even contact with the installation surface.
Fig. 7.3 Jack bolt
7.3 Maximum robot generative force
Table 7.1 Maximum robot generative force
Robot model Maximum vertical generative force FV Maximum horizontal generative force FH Maximum vertical generative moment MV Maximum horizontal generative moment MH
Presto MC35-01 Presto MC50-01 Presto MC70-01
23,700 N 16,700 N 32,900 N・m 28,300 N・m
Fig. 7.4 Maximum robot generative force
Presto MC35-01 Presto MC50-01 Presto MC70-01
Page-9
8. Allowable wrist load
Caution!
A load fixed to the tip of the robot wrist is regulated by the allowable payload mass, allowable static load torque, and allowable moment of inertia. Furthermore, the allowable load torque varies with the actual load inertia moment. Strictly keep the wrist load within each allowable value.
1. Allowable pay load mass
Table 8.1 Allowable pay load mass
Robot model Allowable pay load mass
Presto MC35-01 35 kg or less
Presto MC50-01 50 kg or less
Presto MC70-01 70 kg or less
2. Allowable maximum static load torque
Table 8.2 Allowable maximum static load torque
Allowable static load torque Robot model
Around J4 axis Around J5 axis Around J6 axis
Presto MC35-01 160 N・m or less 160 N・m or less 90 N・m or less
Presto MC50-01 210 N・m or less 210 N・m or less 130 N・m or less
Presto MC70-01 300 N・m or less 300 N・m or less 150 N・m or less
3. Allowable maximum inertia moment
Table 8.3 Allowable maximum inertia moment
Allowable inertial moment Robot model
Around J4 axis Around J5 axis Around J6 axis
Presto MC35-01 16 kg・m2 or less 16 kg・m
2 or less 5 kg・m
2 or less
Presto MC50-01 30 kg・m2 or less 30 kg・m
2 or less 12 kg・m
2 or less
Presto MC70-01 30 kg・m2 or less 30 kg・m
2 or less 12 kg・m
2 or less
Referring to Fig. 8.1~Fig. 8.1.3, use the robot wrist on condition that the load gravity center falls in the
range shown in the wrist torque map.
Furthermore, referring to Fig. 8.2.1~Fig. 8.2.3, use the robot wrist on condition that the static load
torque and the moment of inertia fall in the range shown by the diagram in the wrist torque map.
Page-10
8.1 Torque map
Robot model: 【Presto MC35-01】
Fig. 8.1.1 Wrist axis torque map
Robot model: 【Presto MC50-01】
Fig. 8.1.2 Wrist axis torque map
Page-11
Robot model: 【Presto MC70-01】
Fig. 8.1.3 Wrist axis torque map
8.2 Wrist load conditions
Robot model: 【Presto MC35-01】
Fig. 8.2.1 Wrist load conditions
Page-12
Robot model: 【Presto MC50-01】
Fig. 8.2.2 Wrist load conditions
Robot model: 【Presto MC70-01】
Fig. 8.2.3 Wrist load conditions
Page-13
9. Option specifications
○: Possible to correspond/-: Impossible to correspond
No. Item Specifications Robot model:
MC35/50/70-01
Chemical anchor specification
(Base plate + chemical anchor bolts)
○
OP-F1-020
Ore anchor specification
(Base plate + ore anchor bolts)
○
OP-F2-016
Leveling plate
(□180mm x t=25m 4 plates)
○
OP-F1-021
1 Installation parts
Installation bolts and washers
(Robot installation bolts and washers)
○
OP-F1-022
2 J1 axis 380° stopper J1 axis ±190° operation ○
OP-S3-011
3 J1 axis adjustable stopper
Restriction of J1 axis operation edge
(-2.88~+2.88 rad, every 0.26 rad) ○
OP-S5-016
4 J2 axis adjustable stopper
Restriction of J2 axis operation edge (From the advancement edge and the retreat edge to 0.52rad, every 0.26 rad)
○
OP-A5-020
5 J3 axis Working envelope restriction stopper
Restriction of J3 axis operation edge (The upper side 1.57 rad)
○
OP-A6-019
6 Adjustable limit switch J2, J3 axis adjustable limit switch -
With LS, 1 base -
No LS, 1 base -
With LS, 3 base - 7 J1 axis base LS For J1 axis zone detection
No LS, 3 base -
The dog installation plate attachment - 8 J2 axis arm clear LS
For J2 axis zeroing point and shelter pointconfirmation No dog installation plate -
9 J3 axis motor guard Protection of encoder and connectors of J3 axis motor
10 Wrist axis motor guard Protection of encoder and connectors of J4, J5, J6 axis motor Unnecessary
11 Air piping 2 systems (inside diameter φ6.5X2), from swivel base to J3 axis gear box Standard
12 Application signal line 20 wires (0.2 mm2), from swivel axis to J3 axis gear box Standard
13 Solenoid valve Built-in type -
14 Transfer jig Fork bracket ○
OP-S2-037
15 Transfer fixed jig Arm fixed jig (for J2 axis) Unnecessary
16 Zeroing pin & Zeroing block J1~J4 axis: Pin hole, J5, J6 axis: Block ○
OP-T2-052
17 J2 axis motor protection cover IP65 specification (Motor cover for J2 axis) ○
OP-C1-006
18 Full cover IP67 specification (Motor cover for J2 axis+Wiring
protection cover)
○
OP-C2-004
Page-14
○: Possible to correspond/-: Impossible to correspond
No. Item Specifications Robot model:
MC35/50/70-01
19 Flange adaptor ISO Flange Standard
20 Bypass cable ○ *1
21 Wrist match mark Wrist axes reference position adjustment (sticker) ○
OP-N2-021
22 Cable ID registration cable ○
MR20-OP03-A
23 Bearing installation jig
for J1 axis J1 axis motor shaft portion
○ *2
KP-ZJ-007
24 Bearing installation jig
for wrist axes J1 - J6 axis motor shaft portions
○ *2
KP-ZJ-008
*1: It is scheduled to correspond since August, 2009.
*2: It is scheduled to correspond since June, 2009.
※ The specification and externals described in this specifications might change without a previous
notice for the improvement.
Page-15
10. Application wiring and piping diagram
10.1 Wiring and piping diagram
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 10.1 Wiring and piping diagram
AIR PIPING
APPLICATION SIGNALS
ADDITIONAL AXIS (ENCODER)
ADDITIONAL AXIS (MOTOR)
Page-16
10.2 Details of base and flame
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 10.2 Wiring and piping for application on arm
Fig. 10.3 Wiring and piping for application on base
PERFORATABLE AREA
Application cables are inside the box.
When pulling them out from the box to use, drill the cover and install a cable clamp.
The cable clamp must be water-proof type.
Place the wires so that they do
not touch the motor.
Standard specification
Full cover option specification
J5 MOTOR
J6 MOTOR
APPLICATION SIGNALS
POWER / ENCODER LINES
AIR 2 OUT TUBE
AIR 1 OUT TUBE
BJ1 PANEL
BJ3BOX COVER
AIR 2 OUT TUBE
AIR 1 OUT TUBE
Do not install anything on
the BJ1 panel.
Use air pressure not more than 0.49MPa.
AIR 1 IN
AIR 2 IN
Page-17
10.3 Detailed diagram of the connectors
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
10.3.1 Details of the application connecter BJ1 side (connector)
Partner connecter
Wire-side shell: JFM-WSA-4-A (JST)
Guide plate A kit: JFM-GPAK-4 (JST)
Receptacle housing: JFM2FDN-22V-K (JST)
Receptacle contact:
a: SJ2F-01GF-P1.0 (JST) (0.20 ∼ 0.50sq)
b: SJ2F-21GF-P1.0 (JST) (0.30 ∼ 0.75sq)
Manual crimp tool: for a: YRS-8861 for b: YRF-1120
Cable diameter suitable for wire-side shell: φ26.2~φ28.0
(This figure is drawn seeing from the backside of the robot.)
Fig. 10.4 Details of connectors for application (BJ1 side)
BJ3 side (connector)
Connector type (CN61)
Housing: SMP-10V-BC (JST)
Partner connector
Housing: SMR-10V-B(JST)
Contact: SYM-001T-P0.6 (Applicable wire : AWG#22~28)
Pressure tool: YRS-121 Connector type (CN62)
Housing: SMP-11V-BC (JST)
Partner connector
Housing: SMR-11V-B (JST)
Contact: SYM-001T-P0. 6 (Applicable wire : AWG#22~28)
Manual crimp tool: YRS-121
Fig. 10.5 Details of connectors for application (BJ3 side)
CONNECTOR
Page-18
10.3.2 Details of the additional axis connector
BJ3 side (intermediate connector)
(This pin layout is drawn seeing from the connection side of the robot side connector.)
Fig.10.6 The details of the additional axis motor connector
(This pin layout is drawn seeing from the connection side of the robot side connector.)
Fig.10.7 The details of the additional axis encoder connector
Connector type (CNA1) Housing
VLP-06V (JST) Partner connector Housing VLR-06V (JST) Retainer VLS-03V (JST) Contact SVM-42T-P2.0 (Applicable wire : AWG#22~16) Contact SVM-61T-P2.0 (Applicable wire : AWG#20~14)
Manual crimp tool:
YC-592:(AWG#22~16)
YC-590:(AWG#20~14)
Connector form (CNEA1,CNEA2) Housing
1-1827864-4 (AMP) Partner connector Housing 1-1903130-4 (AMP) Contact 1903116-2 (Applicable wire : AWG#28 - 22)
Manual crimp tool : 1762846-1
Page-19
11. Bypass Cable
11.1 Bypass cable connection outline figure (Option)
Bypass cable box
Standard wire-harness Bypass cable box
Robot (MC)
AX20 controller
Bypass cable
CNMB Cable
CNE cable
Page-20
12. Transport procedure
Safety measures against transport
The following describes precautions for transporting the robot. Fully understand the precautions for safe transport work.
Warning! The robot must be transported by personnel who have licenses required for slinging work, crane operation, forklift truck operation, and others. The weight of the robot and controller is listed in the Operating Manual and the Maintenance Manual. Check for the weight, and then handle them according to procedures suitable for the weight.
Warning! To lift the robot or the controller, follow the procedures specified in the Maintenance Manual. Following any procedures other than those specified will cause the robot to topple over or drop during transport, thus resulting in accidents.
Caution!
During transport or installation work of the robot, pay utmost care not to cause damage to wirings. Furthermore, after installing the robot, take protective measures such as using protective guards so that the wirings will not be damaged by workers or other persons, or forklift trucks or else.
To transport the robot, make it a rule to use a crane. First, put the robot into the configuration shown in figure below and mount the two carrier brackets dedicated to the transport of the robot to both sides of the robot frame. Then, lift the robot using four hanging wires. Fix these dedicated brackets with the two M16 X 35 bolts. The tightening torque is 287
N・m. Recommended length of the hanging wires is 3 m.
Robot model: 【Presto MC35-01】【Presto MC50-01】【Presto MC70-01】
Fig. 13.1 Transport procedure
Lifting JIG (option)
Page-21
13. Installation (specification which contains a robot) 1. Delivery condition
Because the expense is different, which form to choose be sufficiently examined.
Condition Details
1 Delivery on the truck Robot is delivered on the truck near the entrance of customer’s plant.
2 Delivery after installation and test-run Robot is installed and test-run done.
3 Delivery after installation and test-run with work piece After style 2, teaching with work piece is done.
2. Operation and maintenance education
The special spot operation guide and the special spot preservation guide are the outside of the estimation. Also, there is schooling system in the Toyama factory, too. Consult with each NACHI-FUJIKOSHI office for the details. 3. The earth wire construction of controller is class D earthing things above mentioned are
necessary.
4. Consuming power
Peak power 5.0kVA
Waiting status with servo ON 0.78kVA
14. Paint color Standard color Controller cabinet Munsell 10GY9/1 Robot body Munsell 2.5YR-5.5/14
15. Warranty Elapse of 1 year after delivery. The specification and externals described in this specifications might change without a previous notice for the improvement.