Standardiseringsprosjekter og nye standarder på høring/Listegrunnlag 2015-05-22.pdfNS-EN ISO...

Annonseringsdato: 2015-05-22

Standardiseringsprosjekterog

nye standarder

Listenummer: 9/2015

Listenummer: 9/2015 Side: 1 av 108

01 Generelt. Terminologi. Standardisering. Dokumentasjon


Standardforslag til høring - europeiske (CEN)

prEN ISO 5577

Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015)

Språk: enKommentarfrist: 2015-07-31

Standardforslag til høring - internasjonale (ISO)

ISO 7001:2007/DAmd 87

Symbol PI BP 009: Biometric facial recognition facility


ISO 7001:2007/DAmd 88

Symbol PI BP 010: Look to a point


ISO 7001:2007/DAmd 77

Symbol PI BP 015: No headwear


ISO 7001:2007/DAmd 79

Symbol PI BP 017: No sunglasses


ISO 7001:2007/DAmd 80

Symbol PI BP 018: Single person


ISO 7001:2007/DAmd 81

Symbol PI PF 037: Library


ISO 7001:2007/DAmd 82

Symbol PI BP 019: Proceed forward


ISO 7001:2007/DAmd 83

Symbol PI TF 036: Self-contained camper van


ISO 7001:2007/DAmd 71

Symbol PI TF 034: Quarantine, plant




ISO 7001:2007/DAmd 86

Symbol PI BP 012: Move hair


ISO 7001:2007/DAmd 78

Symbol PI BP 016: Wait


ISO 7001:2007/DAmd 74

Symbol PI PF 072: Loop for the hearing impaired


ISO 7001:2007/DAmd 75

Symbol PI BP 014: Do not smile


ISO 7001:2007/DAmd 76

Symbol PI BP 013: Open passport and place on scanning device


ISO 7001:2007/DAmd 89

Symbol PI CF 019: Shoeshine


ISO 7001:2007/DAmd 90

Symbol PI CF 020: Snack machine


ISO 7001:2007/DAmd 91

Symbol PI PF 073: Priority facilities for obese people


ISO 7001:2007/DAmd 92

Symbol PI TF 038: Animal transportation


ISO 7001:2007/DAmd 93

Symbol PI TF 039: Bus disembarkation


ISO 7001:2007/DAmd 94

Symbol PI TF 040: Bus embarkation


ISO 7001:2007/DAmd 95

Symbol PI TF 041: Priority seats for obese people




ISO 7001:2007/DAmd 85

Symbol PI BP 011: Manual passport control


ISO 7001:2007/DAmd 61

Symbol PI TF 029: Rental bicycle


ISO 7001:2007/DAmd 69

Symbol PI TF 032: Quarantine, animal


ISO 7001:2007/DAmd 68

Symbol PI TF 031: Quarantine


ISO 7001:2007/DAmd 70

Symbol PI TF 033: Quarantine, people


ISO/DIS 129-1

Technical drawings - Indication of dimensions and tolerances - Part 1: General principles


ISO/DIS 374-1

Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risksSpråk: enKommentarfrist: 2015-09-13

ISO/DIS 374-5

Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risksSpråk: enKommentarfrist: 2015-09-13

ISO/DIS 3767-3

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipmentSpråk: enKommentarfrist: 2015-08-04

ISO/DIS 5577

Non-destructive testing - Ultrasonic inspection - Vocabulary


ISO/DIS 5577

Non-destructive testing -- Ultrasonic testing -- Vocabulary




ISO/DIS 6405-1

Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols


ISO/DIS 6621-1

Internal combustion engines -- Piston rings -- Part 1: Vocabulary


ISO/DIS 6621-1



ISO/DIS 15489-1

Information and documentation -- Records management -- Part 1: Concepts and principles


ISO/DIS 16016

Technical product documentation -- Protection notices for restricting the use of documents and products


ISO/DIS 18388

Technical product documentation (TPD) -- Relief grooves -- Types and dimensioning


ISO/DIS 18405

Underwater acoustics -- TerminologyUndervannsakustikk – Terminologi


ISO/DIS 28564-2

Public information guidance systems -- Part 2: Design principles and requirements for location signs and direction signs


ISO-standarder

ISO 7001:2007/Amd 2:2015

Språk: en

ISO 7504:2015

Gas analysis -- Vocabulary

Språk: enErstatter A00008:20:024662

ISO 14084-2:2015

Process diagrams for power plants -- Part 2: Graphical symbols

Språk: en

ISO/TS 19408:2015

Footwear -- Sizing -- Vocabulary and terminology

Språk: en



ISO/TS 24620-1:2015

Language resource management -- Controlled natural language (CNL) -- Part 1: Basic concepts and principles

Språk: en

Rapporter fra CEN (CR)

CEN ISO/TS 80004-1:2014

Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010)

Språk: en

CEN ISO/TS 80004-3:2014

Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)

Språk: en

CEN ISO/TS 80004-4:2014

Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)

Språk: en

Fastsatte norske standarder

NS-EN 16601-00-01:2015

Space systems - Glossary of terms

Språk: en

NS-EN ISO 5527:2015

Cereals - Vocabulary (ISO 5527:2015)Korn - Terminologi (ISO 5527:2015)

Språk: en

NS-EN ISO 7010:2012/A5:2015

Amendment 5 - Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 5:2014)

Endringsblad 5 - Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter (ISO 7010:2011/Amd 5:2014)

Språk: en

NS-EN ISO 10628-1:2015

Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014)Diagrammer for kjemisk og petrokjemisk industri - Del 1: Spesifikasjon av diagrammer (ISO 10628-1:2014)

Språk: en

NS-ISO 30300:2011

Information and documentation - Management systems for records - Fundamentals and vocabularyInformasjon og dokumentasjon - Styringssystemer for dokumentasjon - Grunntrekk og terminologi

Språk: en

Tilbaketrukne norske standarder

NS-EN 13701:2001

Space systems - Glossary of termsRomsystemer - Terminologi

Språk: enIngen erstatning


03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport



prEN 13269

Maintenance - Guideline on preparation of maintenance contractsVedlikehold - Retningslinjer for utarbeidelse av vedlikeholdskontrakter


prEN 14508 rev

Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail

Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev


prEN 16708

Beauty Salon Services - Requirements and recommendations for the provision of serviceSkjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten


prEN 16708

Beauty Salon Services - Requirements and recommendations for the provision of serviceSkjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten


prEN 16844

Aesthetic medicine services - Non-surgical medical proceduresTjenester ved estetisk medisin - Ikke-kirurgisk medisinske prosedyrer



ISO/DIS 12812-1

Core Banking -- Mobile Financial Services -- Part 1: General framework


ISO/DIS 12812-2

Core banking -- Mobile Financial Services -- Part 2: Security and data protection for mobile financial services


ISO/DIS 12812-3

Core Banking -- Mobile Financial Services -- Part 3: Financial application lifecycle management


ISO/DIS 12812-4

Core Banking -- Mobile Financial Services -- Part 4: Mobile payments-to-person




ISO/DIS 12812-5

Core Banking -- Mobile Financial Services -- Part 5: Mobile Payments to Business


ISO-standarder

ISO/TR 17185-3:2015

Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperationSpråk: en

ISO/TR 17424:2015

Intelligent transport systems -- Cooperative systems -- State of the art of Local Dynamic Maps concepts

Språk: en


CEN ISO/TS 25110:2013

Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013)

Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013)

Språk: en

CEN ISO/TR 24014-2:2013

Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013)

Språk: en

CEN ISO/TR 24014-3:2013

Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013)Språk: en

CEN ISO/TR ISO 24014-3:2013


CEN ISO/TS 17419:2014

Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013)

Språk: en

CEN ISO/TS 17423:2014

Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013)

Språk: en

CEN ISO/TS 17427:2014

Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014)Språk: en



CEN ISO/TS 17444-2:2013

Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS 17444-2:2013)

Språk: en

CEN ISO/TS 18234-1:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013)Språk: en

CEN ISO/TS 18234-2:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)Språk: en

CEN ISO/TS 18234-7:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013)Språk: en

CEN/TR 10345:2013

Guideline for statistical data treatment of inter laboratory tests for validation of analytical methodsRetningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder

Språk: en

CEN/TR 15367-1:2014

Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuelsPetroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel

Språk: en

CEN/TR 16706:2014

Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report

Språk: en

CEN/TS 14014:2015

Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling

Språk: en

CEN/TS 15448:2014

Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)Språk: en

CEN/TS 16454:2013

Intelligent transport systems - ESafety - ECall end to end conformance testingIntelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (eCall)

Språk: en

CEN/TS 16555-1:2013

Innovation Management - Part 1: Innovation Management SystemInnovasjonsledelse - Del 1: System for innovasjonsledelse

Språk: en

CEN/TS 16555-2:2014

Innovation management - Part 2: Strategic intelligence management

Språk: en

CEN/TS 16555-3:2014

Innovation management - Part 3: Innovation thinking

Språk: en



CEN/TS 16555-4:2014

Innovation management - Part 4: Intellectual property management

Språk: en

CEN/TS 16555-5:2014

Innovation management - Part 5: Collaboration management

Språk: en

CEN/TS 16555-6:2014

Innovation management - Part 6: Creativity management

Språk: en

CEN/TS 16658:2014

Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperabilitySpråk: en

CEN/TS 16702-2:2015

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder

Språk: en

CEN/TS 16735:2015

Postal services - Extensible Common Structure and Representation for Postal Rates - EPR

Språk: en

CEN/TS 419261:2015

Security requirements for trustworthy systems managing certificates and time-stamps

Språk: en


NS-EN 9110:2010

Quality Management Systems - Requirements for Aviation Maintenance OrganizationsSystemer for kvalitetssikring - Krav til vedlikeholdsorganisasjoner innenfor luftfart


NS-EN 9121:2009

Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)


07 Matematikk. Naturvitenskap


ISO/DIS 10272-1

Microbiology of food and animal feed -- Horizontal method for detection and enumeration of Campylobacter -- Part 1: Detection method

Fôr- og næringsmiddelmikrobiologi – Horisontal metode for bestemmelse og telling av Campylobacter spp – Del 1: Bestemmelsesmetode




ISO-standarder

ISO 18458:2015

Biomimetics -- Terminology, concepts and methodology

Språk: en

ISO 18459:2015

Biomimetics -- Biomimetic structural optimization

Språk: en


CEN ISO/TR 6579-3:2014

Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR 6579-3:2014)Språk: en

CEN ISO/TS 80004-1:2014

Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010)

Språk: en

CEN ISO/TS 80004-3:2014

Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010)

Språk: en

CEN ISO/TS 80004-4:2014

Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011)

Språk: en

CEN ISO/TS 13830:2013

Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013)

Nanoteknologi - Veiledning om frivillig merking av forbrukerprodukter som inneholder produserte nanoobjekter (ISO/TS 1380:2013)

Språk: en

CEN ISO/TS 15216-1:2013

Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 1: Method for quantification (ISO/TS 15216-1:2013, Corrected Version 2013-05-01)

Fôr- og nærimgsmiddelmikrobiologi – Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR – Del 1: Metode for kvantitative bestemmelse (ISO/DTS 15216-1:2012)

Språk: en

CEN ISO/TS 15216-2:2013

Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 2: Method for qualitative detection (ISO/TS 15216-2:2013, Corrected Version 2013-05-01)

Fôr- og nærimgsmiddelmikrobiologi – Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR – Del 2: Metode for kvalitativ bestemmelse (ISO/DTS 15216-2:2012)

Språk: en

CEN ISO/TS 17919:2013

Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013)

Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener – Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013)

Språk: en

CEN/TR 15449-5:2015

Geographic information - Spatial data infrastructures - Part 5: Validation and testing

Språk: en



CEN/TR 16588:2014

Manual measurement of snow water equivalent

Språk: en

11 Helsevesen, Teknikk


prEN 16844

Aesthetic medicine services - Non-surgical medical proceduresTjenester ved estetisk medisin - Ikke-kirurgisk medisinske prosedyrer


prEN ISO 1797

Dentistry - Shanks for rotary, oscillating and reciprocating instruments (ISO/DIS 1797:2015)Tannpleie - Skaft for roterende, vibrerende og stemplende instrumenter (ISO/DIS 1797:2015)


prEN ISO 5832-3 rev

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO/DIS 5832-3:2015)

Kirurgiske implantater - Metalliske materialer - Del 3:Legering av smidd titan med 6 % aluminium og 4 % vanadium (ISO/DIS 5832-3:2015)


prEN ISO 7199

Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO/DIS 7199:2015)Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO/DIS 7199:2015)


prEN ISO 25539-1 rev

Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO/DIS 25539-1:2015)Kardiovaskulære implantater - Endovaskulært utstyr - Del 1: Endovaskulære proteser (ISO/DIS 25539-1:2015)



ISO/DIS 1797

Dentistry -- Shanks for rotary, oscillating and reciprocating instruments


ISO/DIS 5832-1

Implants for surgery - Metallic materials - Part 1: Wrought stainless steelImplantater for kirurgi - Metalliske materialer - Del 1: Smidde rustfritt stål


ISO/DIS 5832-3

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloyImplantater for kirurgi - Metalliske materialer - Del 3: Smidde titan 6-aluminium 4-vanadium legering




ISO/DIS 7199

Cardiovascular implants and artificial organs - Blood-gas exchangersKardiovaskulære implantater og kunstige organer - Blodgassutvekslere


ISO/DIS 7787-1

Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters


ISO/DIS 9173-1

Dentistry -- Extraction forceps -- Part 1: General requirementsTannpleie - Ekstraksjonsstenger - Del 1: Generelle krav


ISO/DIS 9173-1

Dentistry -- Extraction forceps -- Part 1: General requirementsTannpleie - Ekstraksjonsstenger - Del 1: Generelle krav


ISO/DIS 9626

Stainless steel needle tubing for the manufacture of medical devices -- Requirements and test methods


ISO/DIS 11040-8

Prefilled syringes -- Part 8: Requirements and test methods for finished prefilled syringes


ISO/DIS 11418-1

Containers and accessories for pharmaceutical preparations -- Part 1: Drop-dispensing glass bottles


ISO/DIS 11418-2

Containers and accessories for pharmaceutical preparations -- Part 2: Screw-neck glass bottles for syrups


ISO/DIS 11418-3

Containers and accessories for pharmaceutical preparations -- Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage formsSpråk: enKommentarfrist: 2015-06-04

ISO/DIS 11418-7

Containers and accessories for pharmaceutical preparations -- Part 7: Screw-neck vials made of glass tubing for liquid dosage formsSpråk: enKommentarfrist: 2015-06-04



ISO/DIS 15674

Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir system (with/without filter) and soft venous reservoir bagsSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 15675

Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters


ISO/DIS 15676

Cardiovascular implants and artificial organs -- Single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenationSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 18559

Dentistry -- Extraoral spatulas for mixing dental cements


ISO/DIS 19429

Dentistry -- Designation system for dental implants


ISO/DIS 25539-1

Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses


ISO/DIS 80601-2-74

Medical Electrical Equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipmentSpråk: enKommentarfrist: 2015-09-03

ISO-standarder

ISO 8600-2:2015

Endoscopes - Medical endoscopes and endotherapy devices -- Part 2: Particular requirements for rigid bronchoscopes


ISO 16971:2015

Ophthalmic instruments -- Optical coherence tomograph for the posterior segment of the human eye

Språk: en

ISO 19045:2015

Ophthalmic optics -- Contact lens care products -- Method for evaluating Acanthamoeba encystment by contact lens care products

Språk: en

ISO/TR 80001-2-7:2015

Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1Språk: en



ISO/TS 17518:2015

Medical laboratories -- Reagents for staining biological material -- Guidance for users

Språk: en


CEN ISO/TS 13004:2014

Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013)Språk: en

CEN ISO/TS 16775:2014

Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014)Språk: en

CEN/TR 16824:2015

Early care services for babies born with cleft lip and/or palate

Språk: en

CEN/TS 16677:2014

Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel releaseØyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller

Språk: en


NS-EN 45502-2-2:2008

Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators)

Aktivt implanterbart medisinsk utstyr - Del 2-2: Særskilte krav til aktivt implanterbart medisinsk utstyr beregnet på behandling av takykardi (omfatter implanterbare defibrillatorer)

Språk: en

NS-EN ISO 9687:2015

Dentistry - Graphical symbols for dental equipment (ISO 9687:2015)Tannpleie - Grafiske symboler for utstyr (ISO 9687:2015)

Språk: en

NS-EN ISO 11608-1:2015

Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2014)

Nålbaserte injeksjonssystemer til medisinsk bruk - Krav og prøvingsmetoder - Del 1: Nålbaserte injeksjonssystemer (ISO 11608-1:2014)

Språk: en

NS-EN ISO 11979-8:2015

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006 + Amd 1:2011)Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO 11979-8:2006 + Amd 1:2011)

Språk: en

NS-EN ISO 14534:2015

Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011)Oftalmisk optikk - Kontaktlinser og vedlikeholdsutstyr for kontaktlinser - Grunnleggende krav (ISO 14534:2011)

Språk: en




NS-EN ISO 9687:1995

Dental equipment - Graphical symbols (ISO 9687:1993)Tannpleie - Grafiske symboler for utstyr (ISO 9687:1993)


NS-EN ISO 11608-1:2012

Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO 11608-1:2012)

Nålbaserte injeksjonssystemer til medisinsk bruk - Krav og prøvingsmetoder - Del 1: Nålbaserte injeksjonssystemer (ISO 11608-1:2012)


NS-EN ISO 11979-8:2009

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006)Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO 11979-8:2006)


NS-EN ISO 11979-8:2009/A1:2011

Amendment A1 - Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2006/Amd 1:2011)Endringsblad A1 - Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO 11979-8:2006/Amd 1:2011)


NS-EN ISO 14534:2011

Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2011)Øyeoptikk - Kontaktlinser og vedlikeholdsutstyr for kontaktlinser - Grunnleggende krav (ISO 14534:2011)


13 Miljøvern. Helsevern. Sikkerhet


EN ISO 8041:2005/prA1:2015

Human response to vibration - Measuring instrumentation - Amendment 1 (ISO 8041:2005/DAM 1:2015)Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015)


prEN 13204 rev

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirementsDobbeltvirkende hydrauliske redningsverktøy for brann og redningstjenestebruk - Sikkerhets- og ytelseskrav


prEN 14582

Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methodsKarakterisering av avfall - Halogen- og svovelinnhold - Bestemmelsesmetoder for oksygenforbrenning i lukkede systemer




prEN 14944-1

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters

Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere


prEN 14944-1 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parametersSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3

Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious productsSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3 rev


prEN 16785-2

Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method


prEN 16841-1

Ambient air - Determination of odour in ambient air by using field inspection - Part 1: Grid methodLuftundersøkelse – Bruk av feltinspeksjon ved bestemmelse av lukt i uteluft – Del 1: Gridmetode


prEN 16841-2

Ambient air - Determination of odour in ambient air by using field inspection - Part 2: Plume methodLuftundersøkelse – Bruk av feltinspeksjon ved bestemmelse av lukt i uteluft – Del 2: Røykfanemetode


prEN 16846-1

Photocatalysis - Measurement of efficiency of photocatalytic air cleaners used for the elimination of VOC and odour in indoor air" - Part 1: Batch mode test method in closed chamber

Fotokatalyse - Batchprøvingsmetode – Del 1: Måling av effektivitet til fotokatalyseutstyr i aktiv modus ved fjerning av flyktige organiske forbindelser (VOC) og lukt i inneluft


prEN 16848

Bio-based products - Template for B2B reporting and communication of characteristics - Data sheetBiobaserte produkter - Templat for B2B rapportering og kommunikasjon av karakteristikker - Dataark




prEN 16856

Portable aerosol dispenser for fire extinguishing purposes


prEN ISO 374-1

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/DIS 374-1:2015)Språk: enKommentarfrist: 2015-07-16

prEN ISO 374-5

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organism risks (ISO/DIS 374-5:2015)Språk: enKommentarfrist: 2015-07-16

prEN ISO 15012-4

Health and safety in welding and allied processes - Equipment for capture and separation of fume - Part 4: General requirements (ISO/DIS 15012-4:2015)Språk: enKommentarfrist: 2015-06-30


ISO 389-7:2005/DAmd 1

Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions

Referansehøreterskel ved 0 Hz og 18 000 Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust felt-forhold


ISO 8041:2005/DAmd 1

Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015)Språk: enKommentarfrist: 2015-06-25

ISO 14835-1:2005/DAmd 1

Mekaniske vibrasjoner og støt - Kuldeprovokasjonsprøving for vurdering av perifer vaskulær funksjon - Del 1: Måling og vurdering av temperatur på huden på fingeren - Endringsblad 1Språk: enKommentarfrist: 2015-09-24

ISO/DIS 374-1

Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risksSpråk: enKommentarfrist: 2015-09-13

ISO/DIS 374-5

Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risksSpråk: enKommentarfrist: 2015-09-13



ISO/DIS 4869-1

Acoustics -- Hearing protectors -- Part 1: Subjective method for the measurement of sound attenuationAkustikk - Hørselsvern - Del 1: Subjektiv metode for måling av lyddemping


ISO/DIS 7029

Acousticx - Statistical distribution of hearing thresholds as a function of ageAkustikk - Statistisk fordeling av høreterskler som funksjon av alder


ISO/DIS 7029

Acoustics - Statistical distribution of hearing thresholds related to age and genderAkustikk - Statistisk fordeling av høreterskler som funksjon av alder


ISO/DIS 9241-940

Ergonomics of human-computer interaction -- Part 940: Evaluation of tactile and haptic interactions


ISO/DIS 12219-6

Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber methodSpråk: enKommentarfrist: 2015-08-16

ISO/DIS 13073-3

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal processSpråk: enKommentarfrist: 2015-07-31

ISO/DIS 14004

Environmental management systems -- General guidelines on principles, systems and support techniques


ISO/DIS 15011-1

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysisSpråk: enKommentarfrist: 2015-07-05

ISO/DIS 18079-1

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General


ISO/DIS 18079-3

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets




ISO/DIS 24516-1

Guidelines for Management of Assets of water supply and wastewater systems -- Part 1: Drinking water distribution networks


ISO/DIS 27065

Protective clothing -- Performance requirements for protective clothing worn by operators applying liquid pesticides and for re-entry workersSpråk: enKommentarfrist: 2015-06-07

ISO/DIS 37101

Sustainable development of communities -- Management systems -- Requirements with guidance for resilience and smartnessBærekraftig utvikling av samfunn -- Styringssystemer -- Krav med veiledning for motstandsdyktighet og smarthet


ISO-standarder

ISO 9697:2015

Water quality -- Gross beta activity in non-saline water -- Test method using thick source


ISO 16505:2015

Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures

Språk: en

ISO/TS 16976-2:2015

Respiratory protective devices -- Human factors -- Part 2: Anthropometrics

Språk: enErstatter A00008:20:042762,A00008:20:060692

ISO/TS 37151:2015

Smart community infrastructures -- Principles and requirements for performance metrics

Språk: en


CEN ISO/TR 12296:2013

Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012)

Språk: en

CEN ISO/TS 29843-1:2014

Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010)Språk: en

CEN ISO/TR 7250-2:2011/A1:2013

Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013)Språk: en

CEN ISO/TR 9241-331:2013

Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012)

Språk: en



CEN ISO/TS 9241-411:2014

Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012)Språk: en

CEN ISO/TS 14067:2014

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)Språk: en

CEN ISO/TS 29843-2:2014

Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected version 2012-02-01)Språk: en

CEN/TR 13205-3:2014

Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency dataSpråk: en

CEN/TR 15120:2013

Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloadingTanker for transport av farlig gods - Retningslinjer og anbefalinger for lasting, transport og lossing

Språk: en

CEN/TR 15350:2013

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery

Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter

Språk: en

CEN/TR 16193:2013

Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli

Språk: en

CEN/TR 16394:2014

Characterization of sludges - Protocol for preparing synthetic suspensions

Språk: en

CEN/TR 16394:2014/AC:2015

Characterization of sludges - Protocol for preparing synthetic suspensions

Språk: en

CEN/TR 16456:2013

Characterization of sludges - Good practice of sludge dewateringKarakterisering av slam – Veiledning for avvanning av slam

Språk: en

CEN/TR 16663:2014

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field methodSpråk: en

CEN/TR 16705:2014

Perimeter protection - Performance classification methodology

Språk: en



CEN/TR 16721:2014

Bio-based products - Overview of methods to determine the bio-based contentBiobaserte produkter - Oversikt over metoder for å bestemme biobasert innhold

Språk: en

CEN/TR 16788:2014

Characterization of sludges - Guideline of good practice for thermal processes

Språk: en

CEN/TR 16832:2015

Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks)Språk: en

CEN/TS 1948-5:2015

Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBsSpråk: en

CEN/TS 13649:2014

Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption

Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon

Språk: en

CEN/TS 15937:2013

Sludge, treated biowaste and soil - Determination of specific electrical conductivitySlam, behandlet organisk avfall og jord - Bestemmelse av spesifikk elektrisk konduktivitet

Språk: en

CEN/TS 16023:2013

Characterization of waste - Determination of gross calorific value and calculation of net calorific value

Språk: en

CEN/TS 16181:2013

Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)Språk: en

CEN/TS 16201:2013

Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules

Språk: en

CEN/TS 16202:2013

Sludge, treated biowaste and soil - Determination of impurities and stones

Språk: en

CEN/TS 16450:2013

Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5)Luftundersøkelse - Uteluft - Automatiserte målesystemer til måling av svevestøvkonsentrasjonen (PM10, PM2,5)

Språk: en

CEN/TS 16459:2013

External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187

Språk: en



CEN/TS 16516:2013

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor airByggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft

Språk: en

CEN/TS 16524:2013

Mechanical products - Methodology for reduction of environmental impacts in product design and developmentMekaniske produkter - Ecodesign metodikk

Språk: en

CEN/TS 16595:2013

CBRN - Vulnerability Assessment and Protection of People at Risk

Språk: en

CEN/TS 16637-1:2014

Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps

Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger

Språk: en

CEN/TS 16637-2:2014

Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching testByggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving

Språk: en

CEN/TS 16640:2014

Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method

Språk: en

CEN/TS 16645:2014

Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]peryleneSpråk: en

CEN/TS 16675:2014

Characterisation of waste - Test methods for the determination of the monolithic status of waste

Språk: en

CEN/TS 16692:2015

Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry

Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i hele vannprøver ved hjelp av fastfaseekstraksjon (SPE) og gasskromatografi med trippel kvadrupol-massespektrometri

Språk: en


NS-EN 469:2005

Protective clothing for firefighters - Performance requirements for protective clothing for firefighting - (Corrigendum AC:2006 incorporated)

Vernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking - (innbefattet rettelsesblad AC:2006)

Språk: en

NS-EN 469:2005/AC:2006

Corrigendum AC - Protective clothing for firefighters - Performance requirements for protective clothing for firefightingRettelsesblad AC - Vernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking

Språk: en



NS-EN 469:2005/A1:2006

Amendment A1 - Protective clothing for firefighters - Performance requirements for protective clothing for firefightingEndringsblad A1 - Vernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking

Språk: en

NS-EN 12972:2015

Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanksTanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker

Språk: en

NS-EN 14533:2015

Textiles and textile products - Burning behaviour of bedding items - Classification schemeTekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema

Språk: en

NS-EN 15768:2015

Influence of materials on water intended for human consumption - GC-MS identification of water leachable organic substancesMaterialers påvirkning på drikkevann - GC-MS-identifikasjon av vannløselige organiske forbindelser

Språk: en

NS-EN 16523-1:2015

Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact

Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 1: Gjennomtrenging av flytende kjemikalier som er i kontinuerlig kontakt med materialer

Språk: en

NS-EN 16523-2:2015

Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact

Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 2: Gjennomtrenging av kjemikalier i gassform som er i kontinuerlig kontakt med materialer

Språk: en

NS-EN 16623:2015

Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking

Maling og lakk - Reaktive belegg for brannbeskyttelse av metalliske underlag - Definisjoner, krav, egenskaper og merking

Språk: en

NS-EN 45544-1:2015

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

Arbeidsplassluft - Elektrisk utstyr benyttet til direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 1: Generelle krav og prøvingsmetoder

Språk: en

NS-EN 45544-2:2015

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement

Arbeidsplassluft - Elektrisk utstyr benyttet til direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 2: Ytelseskrav til utstyr for måling av eksponering

Språk: en

NS-EN 45544-3:2015

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas detection

Arbeidsplassluft - Elektrisk utstyr benyttet til direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 3: Ytelseskrav til utstyr som benyttes til generell gassdeteksjon

Språk: en



NS-EN ISO 7010:2012/A5:2015

Amendment 5 - Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 5:2014)

Endringsblad 5 - Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter (ISO 7010:2011/Amd 5:2014)

Språk: en

NS-EN ISO 16198:2015

Soil quality - Plant-based test to assess the environmental bioavailability of trace elements to plants (ISO 16198:2015)

Jordkvalitet - Plantebasert prøving for å bestemme den miljømessige biologiske tilgjengeligheten av sporstoffer for planter (ISO 16198:2015)

Språk: en


NS-EN 374-3:2003

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals - (Corrigendum AC:2006 incorporated)

Vernehansker mot kjemikalier og mikroorganismer - Del 3: Bestemmelse av motstand mot molekylær gjennomtrengning av kjemikalier - (innbefattet rettelsesblad AC:2006)


NS-EN 469:2014

Protective clothing for firefighters - Performance requirements for protective clothing for firefightingVernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking


NS-EN 12972:2007



NS-EN 14533:2003



NS-EN 45544-1:1999

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods

Arbeidsplassluft - Elektrisk utstyr benyttet for direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 1: Generelle krav og prøvingsmetoder


NS-EN 45544-2:1999

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the region of limit values

Arbeidsplassluft - Elektrisk utstyr benyttet for direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 2: Ytelseskrav til utstyr benyttet for å måle konsentrasjoner i området rundt grenseverdier




NS-EN 45544-3:1999

Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for measuring concentrations well above limit values

Arbeidsplassluft - Elektrisk utstyr benyttet for direkte påvisning og direkte konsentrasjonsmåling av giftige gasser og damper - Del 3: Ytelseskrav for utstyr benyttet for å måle konsentrasjoner godt over grenseverdier


17 Metrologi og måling. Fysiske fenomener


prEN ISO 25178-72

Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO/DIS 25178-72:2015)Geometriske produktspesifikasjoner (GPS) - Overflatebeskaffenhet: Areal - Del 72: XML-filformat x3p (ISO/DIS 25178-72: 2015)



ISO 16063-21:2003/DAmd 1

Metoder for kalibrering av støt- og vibrasjonstransdusere - Del 21: Vibrasjonskalibrering ved sammenligning med referansetransduser - Endringsblad 1Språk: enKommentarfrist: 2015-08-04

ISO/DIS 1

Geometrical product specifications (GPS) -- Standard reference temperature for the specification of geometrical and dimensional propertiesSpråk: enKommentarfrist: 2015-06-21

ISO/DIS 5167-5

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 5: Cone meters

Beregning av væske strom bassert på trykkvariasjonsmålere i tversnitt seksjonsfylling - Del 5: kjegle målere


ISO/DIS 9296.2

Acoustics -- Declared noise emission values of information technology and telecommunications equipmentAkustikk - Deklarerte verdier for støyemisjon fra informasjonsteknologi og telekommunikasjon


ISO/DIS 13373-9

Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors

Tilstandsovervåking og diagnostikk av maskiner – Vibrasjonsovervåking – Del 3: Diagnostikkteknikk for elektriske motorer


ISO/DIS 13374-4

Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation

Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon




ISO/DIS 17208-1

Underwater acoustics -- Quantities and procedures for description and precision measurement of underwater sound from ships -- Part 1: Requirements for precision measurements in deep water used for comparison purposes

Undervannsakustikk – Størrelser og prosedyrer for beskrivelse og måling av undervannslyd fra skip – Del 1: Krav til presisjonsmålinger i dypt vann for sammenligningsformål


ISO/DIS 18405

Underwater acoustics -- TerminologyUndervannsakustikk – Terminologi


ISO/DIS 25178-72

Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p


ISO-standarder

ISO 23771:2015

Textile machinery -- Guide to the design of textile machinery for reduction of the noise emissions

Språk: en


CEN ISO/TS 8062-2:2013

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013, Corrected version 2013-11-01)Språk: en

CEN ISO/TS 15530-1:2013

Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013)Språk: en

CEN/TR 10345:2013

Guideline for statistical data treatment of inter laboratory tests for validation of analytical methodsRetningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder

Språk: en


NS-EN 14462:2015

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3

Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: en

NS-EN 45501:2015

Metrological aspects of non-automatic weighing instrumentsMetrologiske aspekter ved ikke-automatisk veieutstyr

Språk: en



NS-EN ISO 14638:2015

Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)Geometriske produktspesifikasjoner (GPS) - Matrisemodell (ISO 14638:2014)

Språk: en


NS-EN 14462:2005+A1:2009


Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert dets hjelpeutstyr - Nøyaktighetsgrad 2 og 3


19 Prøving


prEN ISO 4545-2

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 4545-2:2015)Metalliske materialer - Knoop hardhetsprøving - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner (ISO/DIS 4545-2: 2015)


prEN ISO 4545-3

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO/DIS 4545-3:2015)Metalliske materialer - Knoop hardhetsprøving - Del 3: Kalibrering av referanseblokker (ISO/DIS 4545-3: 2015)


prEN ISO 5577

Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015)



ISO/DIS 5577

Non-destructive testing - Ultrasonic inspection - Vocabulary


ISO/DIS 5577

Non-destructive testing -- Ultrasonic testing -- Vocabulary


ISO/DIS 19430

Determination of particle size distribution -- Particle tracking analysis



19 Prøving

ISO-standarder

ISO 18249:2015

Non-destructive testing -- Acoustic emission testing -- Specific methodology and general evaluation criteria for testing of fibre-reinforced polymersSpråk: en


CEN/TR 15589:2014

Non destructive testing - Code of practice for the approval of NDT personnel by recognised third party organisations under the provisions of Directive 97/23/ECSpråk: en

CEN/TR 16638:2014

Non-destructive testing - Penetrant and magnetic particle testing using blue light

Språk: en

CEN/TS 16637-1:2014



Språk: en

CEN/TS 16637-2:2014


Språk: en

21 Mekaniske systemer og komponenter til allmenn bruk


prEN 12080

Railway applications - Axleboxes - Rolling bearingsJernbane - Akselkasser - Rullelagre



ISO/DIS 3245.3

Rolling bearings -- Needle roller bearings with drawn cup and without inner ring -- Boundary dimensions, geometrical product specifications (GPS) and tolerance valuesSpråk: enKommentarfrist: 2015-08-09

ISO/DIS 6336-5

Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials


ISO/DIS 6336-5

Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials




ISO/DIS 15242-1

Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals


ISO/DIS 15242-2

Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and cylindrical outside surfaceSpråk: enKommentarfrist: 2015-06-29

ISO/DIS 15242-2

Rolling bearings -- Measuring methods for vibration -- Part 2: Radial ball bearings with cylindrical bore and outside surface


ISO/DIS 15242-1

Rolling bearings -- Measuring methods for vibration -- Part 1: Fundamentals


ISO/DIS 21940-12

Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviourMekaniske vibrasjoner - Rotoravbalansering – Del 12: Prosedyrer og toleranser for fleksible rotorer



NS-EN 14399-1:2015

High-strength structural bolting assemblies for preloading - Part 1: General requirementsHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 1: Generelle krav

Språk: en

NS-EN 14399-2:2015

High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloadingHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 2: Egnethetsprøving for forspenning

Språk: en

NS-EN 14399-3:2015

High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 3: System HR - Sekskantskrue- og mutterforbindelser

Språk: en

NS-EN 14399-4:2015

High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 4: System HV - Sekskantskrue- og mutterforbindelser

Språk: en

NS-EN 14399-5:2015

High-strength structural bolting assemblies for preloading - Part 5: Plain washersHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 5: Underlagsskiver

Språk: en

NS-EN 14399-6:2015

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washersHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 6: Skråfasede underlagsskiver

Språk: en




NS-EN 14399-1:2005

High-strength structural bolting assemblies for preloading - Part 1: General requirementsHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 1: Generelle krav


NS-EN 14399-2:2005

High-strength structural bolting assemblies for preloading - Part 2: Suitability test for preloadingHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 2: Egnethetsprøving for forspenning


NS-EN 14399-3:2005

High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 3: System HR - Sekskantskrue- og mutterforbindelser


NS-EN 14399-4:2005

High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assembliesHøyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 4: System HV - Sekskantskrue -og mutterforbindelser


NS-EN 14399-5:2005

High-strength structural bolting assemblies for preloading - Part 5: Plain washers - (Corrigendum AC:2006 incorporated)

Høyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 5: Underlagsskiver for system HR - (innbefattet rettelsesblad AC:2006)


NS-EN 14399-6:2005

High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers - (Corrigendum AC:2006 incorporated)

Høyfaste skrueforbindelser for forspenning til konstruksjonsformål - Del 6: Skråfasede underlagsskiver for system HR og HV - (innbefattet rettelsesblad AC:2006)


23 Hydrauliske systemer og komponenter til allmenn bruk


EN 13445-3:2014/prA4

Unfired pressure vessels - Part 3: DesignIkke-fyrte trykkbeholdere - Del 3: Konstruksjon


EN 13480-8:2012/prA2

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy pipingMetalliske industrielle rørsystemer - Del 8: Tilleggskrav for aluminiumsrør og aluminiumslegerte rør




prEN 10255

Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methodsUlegerte stålrør egnet for sveising og gjenging - Tekniske leveringsbetingelser


prEN 10255

Non-Alloy steel tubes suitable for welding, threading and other joining methods - Requirements and test methodsUlegerte stålrør egnet for sveising, gjenging og andre sammenføyningsmetoder - Krav og prøvingsmetoder


prEN ISO 6134 rev

Rubber hoses and hose assemblies for saturated steam - Specification (ISO/DIS 6134:2015)Gummislanger og slanger med koblinger for mettet damp - Krav (ISO/DIS 6134:2015)


prEN ISO 6802 rev

Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO/DIS 6802:2015)Gummi- og plastrør og slangekoblinger med vaier forsterkning - Hydraulisk impuls test med bøying


prEN ISO 6803 rev

Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO/DIS 6803:2015)Slanger og slangeforbindelser av gummi eller plast - Prøving av hydrauliske trykkstøt uten bøying (ISO/DIS 6803:2015)


prEN ISO 7233

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO/DIS 7233:2015)Gummi- og plastslanger og slangeforbindelser - Bestemmelse av bestandighet mot undertrykk (ISO/DIS 7233:2015)


prEN ISO 7326

Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO/DIS 7326:2015)Slanger av gummi og plast - Bestemmelse av ozonbestandighet under statiske forhold (ISO/DIS 7326:2015)


prEN ISO 8331

Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO/DIS 8331:2015)Gummi- og plastslanger og slangekoblinger - Retningslinjer for valg, lagring, bruk og vedlikehold (ISO/DIS 8331:2015)



ISO/DIS 6134

Rubber hoses and hose assemblies for saturated steam - Specification




ISO/DIS 6802

Rubber and plastics hose and hose assemblies with wire reinforcements -- Hydraulic impulse test with flexing


ISO/DIS 6803

Rubber or plastics hoses and hose assemblies -- Hydraulic-pressure impulse test without flexing


ISO/DIS 7233

Rubber and plastics hoses and hose assemblies -- Determination of suction resistanceGummi- og plastslanger og slangeforbindelser - Bestemmelse av sugemotstand


ISO/DIS 8331

Rubber and plastics hoses and hose assemblies -- Guidelines for selection, storage, use and maintenanceGummi og plastslanger og slangeforbindelser - Veiledning for valg, lagring, bruk og vedlikehold


ISO/DIS 8639.2

Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods for leaktightness and prove of structural design of flexible jointsSpråk: enKommentarfrist: 2015-06-07

ISO/DIS 21007-2

Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 2: Numbering schemes for radio frequency identificationSpråk: enKommentarfrist: 2015-07-19

ISO-standarder

ISO 3601-5:2015

Fluid power systems -- O-rings -- Part 5: Specification of elastomeric materials for industrial applications


ISO 3723:2015

Hydraulic fluid power -- Filter elements -- Method for end load test


ISO 10762:2015

Hydraulic fluid power -- Mounting dimensions for cylinders, 10 MPa (100 bar) series


ISO 18413:2015

Hydraulic fluid power -- Cleanliness of components -- Inspection document and principles related to contaminant extraction and analysis, and data reportingSpråk: enErstatter A00008:20:031795




CEN/TR 1046:2013

Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installationSpråk: en

CEN/TR 13445-101:2015

Unfired pressure vessels - Example of application

Språk: en

CEN/TR 14473:2014

Transportable gas cylinders - Porous materials for acetylene cylinders

Språk: en

CEN/TR 15120:2013

Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloadingTanker for transport av farlig gods - Retningslinjer og anbefalinger for lasting, transport og lossing

Språk: en

CEN/TR 16470:2013

Environmental aspects of ductile iron pipe systems for water and sewerage applicationsMiljøaspekt av seigjern rørsystemer for vann og avløp aspektapplikasjoner

Språk: en

CEN/TR 16626:2014

Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures

Språk: en

CEN/TR 16787:2014

Industrial Gas Installation - Guideline

Språk: en

CEN/TS 12201-7:2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformitySpråk: en

CEN/TS 14541:2013

Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials

Språk: en

CEN/TS 14578:2013

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation

Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning

Språk: en

CEN/TS 14807:2013

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines

Rørledningssystemer – Glassfiberforsterket herdeplast (GRP) basert på umettet polyester (UP) – Retningslinjer for å vurdere styrken av nedgravde GRP-UP rørledninger

Språk: en

CEN/TS 16650:2014

Specification for hose couplings for petrol, oil and lubricants - High pressure couplings

Språk: en



CEN/TS 16765:2015

LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards

Språk: en


NS-EN 12972:2015


Språk: en

NS-EN ISO 11120:2015

Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015)

Gassflasker - Påfyllbare sømløse stålsylindre med vannkapasitet mellom 150 I og 3000 I - Konstruksjon, tilvirkning og prøving (ISO 11120:2015)

Språk: en

NS-EN ISO 25760:2015

Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders (ISO 25760:2009)Gassflasker - Driftsprosedyrer for sikker fjerning av ventiler fra gassflasker (ISO 25760:2009)

Språk: en


NS-EN 12972:2007



NS-EN ISO 11120:1999

Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing (ISO 11120:1999)

Gassflasker - Påfyllbare sømløse gassrør for transport av komprimert gass med vannkapasitet mellom 150 l og 3000 l - Konstruksjon, tilvirkning og prøving (ISO 11120:1999)


NS-EN ISO 11120:1999/A1:2013

Amendment A1 - Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for design of tubes for embrittling gases (ISO 11120:1999/Amd 1:2013)

Endringsblad A1 - Gassflasker - Påfyllbare sømløse stålrør for transport av komprimert gass med vannkapasitet mellom 150 l og 3000 l - Konstruksjon, tilvirkning og prøving - Endringsblad 1: Krav til konstruksjon av rør for gasser som forårsaker materialsprøhet (ISO 11120:1999/Amd 1:2013)



25 Produksjonsteknikk



prEN 16845-1

Photocatalysis - Anti-soiling chemical activity using adsorbed organics under solid/solid conditions - Part 1: Dyes on porous surfaces

Fotokatalyse – Smussavvisende kjemisk aktivitet ved bruk av absorberende organiske stoffer i fast/fast tilstand – Del 1: Fargestoffer på porøs overflate


prEN ISO 3581 rev

Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO/DIS 3581:2015)

Tilsettmaterialer og hjelpestoffer for sveising - Dekkede elektroder for manuell buesveising av rustbestandige og varmefaste stål - Klassifisering (ISO/DIS 3581:2015)


prEN ISO 15012-4


prEN ISO 15012-4


prEN ISO 17637 rev

Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO/DIS 17637:2015)


prEN ISO 17638 rev

Non-destructive testing of welds - Magnetic particle testing (ISO/DIS 17638:2015)Ikke-destruktiv prøving av sveis - Magnetpulverprøving (ISO/DIS 17638:2015)


prEN ISO 17672 rev

Brazing - Filler metals (ISO/DIS 17672:2015)Hardlodding - Tilsettmaterialer (ISO/DIS 17672:2015)


prEN ISO 17916

Safety of thermal cutting machines (ISO/DIS 17916:2015)


prEN ISO 17916

Safety of thermal cutting machines (ISO/DIS 17916:2015)




prEN ISO 18276

Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels - Classification (ISO/DIS 18276:2015)Språk: enKommentarfrist: 2015-07-02


ISO 21538:2004/DAmd 1


ISO/DIS 3581

Welding consumables -- Covered electrodes for manual metal arc welding of stainless and heat-resisting steels -- Classification


ISO/DIS 3581

Welding consumables -- Covered electrodes for manual metal arc welding of stainless and heat-resisting steels -- Classification


ISO/DIS 3677

Filler metal for soft soldering, brazing and braze welding -- Designation


ISO/DIS 5182

Resistance welding -- Materials for electrodes and ancillary equipment


ISO/DIS 8502-9

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

Forbehandling av stål før påføring av maling og beslektede produkter - Prøvinger for å vurdere overflaterenhet - Del 9: Feltmetode for bestemmelse av vannløslige salter ved konduktivitetsmåling


ISO/DIS 10656

Electric resistance welding - Transformers for welding guns with integrated transformers (robot guns)


ISO/DIS 10656

Resistance welding equipment -- Transformers -- Integrated transformers for welding guns


ISO/DIS 15011-1

Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysisSpråk: enKommentarfrist: 2015-07-05



ISO/DIS 15012-4.2

Health and safety in welding and allied processes -- Equipment for capture and separation of fume -- Part 4: General requirements


ISO/DIS 17637

Non-destructive examination of fusion welds - Visual examination


ISO/DIS 17637

Non-destructive testing of welds -- Visual testing of fusion-welded joints


ISO/DIS 17638

Non-destructive examination of welds - Magnetic particle examination of welds


ISO/DIS 17638

Non-destructive testing of welds -- Magnetic particle testing


ISO/DIS 17662

Welding -- Calibration, verification and validation of equipment used for welding, including ancillary activities


ISO/DIS 17672

Brazing -- Filler metals


ISO/DIS 17672

Brazing -- Filler metals


ISO/DIS 17777

Welding consumables -- Covered electrodes for manual metal arc welding of copper and copper alloys -- Classification


ISO/DIS 17916.2

Safety of thermal cutting machines


ISO/DIS 18276

Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of high strength steels -- ClassificationSpråk: enKommentarfrist: 2015-07-02



ISO/DIS 18276

Welding consumables -- Tubular cored electrodes for gas-shielded and non-gasshielded metal arc welding of highstrength steels -- ClassificationSpråk: enKommentarfrist: 2015-08-30

ISO/DIS 18646-1

Robots and robotic devices -- Performance criteria and related test methods for service robot -- Part 1: Locomotion for wheeled robotsSpråk: enKommentarfrist: 2015-06-08

ISO-standarder

ISO 230-7:2015

Test code for machine tools -- Part 7: Geometric accuracy of axes of rotation


ISO 2725-1:2015

Assembly tools for screws and nuts -- Square drive sockets -- Part 1: Hand-operated sockets


ISO 2725-2:2015

Assembly tools for screws and nuts -- Square drive sockets -- Part 2: Machine-operated sockets ("impact")


ISO 2725-3:2015

Assembly tools for screws and nuts -- Square drive sockets -- Part 3: Machine-operated sockets ("non-impact")


ISO 3317:2015

Assembly tools for screws and nuts -- Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches


ISO 7738:2015

Assembly tools for screws and nuts -- Combination wrenches -- Lengths of wrenches and maximum thickness of heads


ISO 14373:2015

Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels


ISO/TR 18491:2015

Welding and allied processes -- Guidelines for measurement of welding energies

Språk: en

ISO/TS 15926-11:2015

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 11: Methodology for simplified industrial usage of reference dataSpråk: en




CEN ISO/TR 14745:2015

Welding - Post-weld heat treatment parameters for steels (ISO/TR 14745:2015)

Språk: en

CEN/TR 13259:2013

Gas welding equipment - Industrial manual and machine blowpipes for flame heating, flame brazing and allied processes

Språk: en

CEN/TR 15339-1:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 1: General requirementsTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 1: Generelle krav

Språk: en

CEN/TR 15339-3:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 3: Torches for thermal spraying and their connection and supply units

Termisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 3: Fakler for termisk sprøyting og deres tilknytning og strømforsyninger

Språk: en

CEN/TR 15339-4:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 4: Gas and liquid fuel supplyTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 4: Gass og flytende brenselforsyning

Språk: en

CEN/TR 15339-5:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 5: Powder and wire feed unitsTermisk sprøyting - Sikkerhetskrav for termisk sprøyting - Del 5: Pulver og trådmating enheter

Språk: en

CEN/TR 15339-6:2014

Thermal spraying - Safety requirements for thermal spraying equipment - Part 6: Spray booth, Handling system, Dust collection, Exhaust system, Filter

Termisk sprøyting - Sikkerhetkrav for termisk sprøyteutstyr - Del 6: Spraykabinett, Håndteringssystem, Støvinnsamling, Utmattende system, Filter

Språk: en

CEN/TS 16599:2014

Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditionsSpråk: en


NS-EN 14462:2015


Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert hjelpeutstyr - Nøyaktighetsgrad 2 og 3

Språk: en

NS-EN 16602-70-08:2015

Space product assurance - Manual soldering of high-reliability electrical connections

Språk: en



NS-EN ISO 4528:2015

Vitreous and porcelain enamel finishes - Guide to selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2015)

Overflater av glaserte emaljer og porselensemaljer - Valg av prøvingsmetoder for produktområder med overflater av glaserte emaljer og porselensemaljer (ISO 4528:2015)

Språk: en

NS-EN ISO 10447:2015

Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015)

Motstandssveising - Prøving av sveiser - Avrivnings- og meiselprøving av motstandspunktsveising og knastsveising (ISO 10447:2015)

Språk: en

NS-EN ISO 14919:2015

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2015)

Termisk sprøyting - Tråd, staver og kjernetråd for flamme og lysbue - Klassifisering - Tekniske leveringsbetingelser (ISO 14919:2015)

Språk: en

NS-EN ISO 14920:2015

Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:2015)Termisk sprøyting - Sprøyting og smelting av selv-flussende legeringer (ISO 14920:2015)

Språk: en

NS-EN ISO 23125:2015

Machine tools - Safety - Turning machines (ISO 23125:2015)Maskinverktøy - Sikkerhet - Dreiemaskiner (ISO 23125:2015)

Språk: en


NS-EN 14462:2005+A1:2009


Overflatebehandlingsutstyr - Støyprøvingskode for overflatebehandlingsutstyr inkludert dets hjelpeutstyr - Nøyaktighetsgrad 2 og 3


NS-EN ISO 4528:2009

Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles (ISO 4528:2000)

Overflater av glaserte emaljer og porselensemaljer - Valg av prøvingsmetoder for produktområder med overflater av glaserte emaljer og porselensemaljer (ISO 4528:2000)


NS-EN ISO 10447:2007

Resistance welding - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006)Motstandssveising - Avrivning- og meiselprøving av motstandspunktsveising og knastsveising (ISO 10447:2006)


NS-EN ISO 14919:2001

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2001)

Termisk sprøyting - Tråd, staver og kjernetråd for flamme og lysbue - Klassifisering - Tekniske leveringsbetingelser (ISO 14919:2001)




NS-EN ISO 14920:1999

Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999)


NS-EN ISO 23125:2010

Machine tools - Safety - Turning machines (ISO 23125:2010)Verktøymaskiner - Sikkerhet - Dreiemaskiner (ISO 23125:2010)


NS-EN ISO 23125:2010/A1:2012

Amendment A1 - Machine tools - Safety - Turning machines (ISO 23125:2010/Amd 1:2012)Endringsblad A1 - Verktøymaskiner - Sikkerhet - Dreiemaskiner (ISO 23125:2010/Amd 1:2012)


27 Energi- og varmeoverføringsteknikk


prEN 15316-4-10

Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems

Varmesystemer og vannbaserte kjølesystemer i bygninger - Metode for beregning av systemets energikrav og systemvirkningsgrader - Del 4-10: Systemer for vindkraftgeneratorer



ISO/DIS 17741.2

General technical rules for measurement, calculation and verification of energy savings of projects


ISO/DIS 17747

Determination of energy savings in organizations


ISO/DIS 18846

Solid biofuels -- Determination of fines content in quantities of pelletsSolid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets


ISO-standarder

ISO 12799:2015

Nuclear energy -- Determination of nitrogen content in UO2, (U,Gd)O2 and (U,Pu)O2 sintered pellets -- Inert gas extraction and conductivity detection methodSpråk: en

ISO 14084-2:2015

Process diagrams for power plants -- Part 2: Graphical symbols

Språk: en




CEN/TS 16214-2:2014

Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance

Bærekraftig fremstilt biomasse til energianvendelser – Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) – Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse

Språk: en


NS-EN 226:1987

Atomizing oil burners - Connecting dimensions between burners and heat generatorsOljeforstøvningsforbrennere - Tilkoblingsmål mellom forbrennere og varmegeneratorer

Språk: en

NS-EN 16440-1:2015

Testing methodologies of refrigerating devices for insulated means of transport - Part 1: Mechanical cooling device with forced air circulation evaporator with or without heating device

Prøvingsmetoder for kjøleutstyr til isolerte transportsystemer - Del 1: Mekaniske kjølesystemer med luftfordampere med eller uten tvungen luftsirkulasjon, med eller uten tilleggsvarme

Språk: en

NS-EN 45510-2-9:2008

Guide for procurement of power station equipment - Part 2-9: Electrical equipment - Cabling systemsRetningslinjer for anskaffelse av kraftstasjonsutstyr - Del 2-9: Elektrisk utstyr - Kablingssystemer

Språk: en

NS-EN 50465:2015

European product standard for combined heating power systems using gas fuelEuropeisk produktstandard for gassfyrte kombinerte varmekraftsystemer

Språk: en

NS-EN ISO 16995:2015

Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)Fast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold (ISO 16995:2015)

Språk: en

NS-ISO 50004:2014

Energy management systems - Guidance for the implementation, maintenance and improvement of an energy management systemEnergiledelsessystemer - Veiledning for implementering, vedlikehold og forbedringer av et energiledelsessystem

Språk: en

NS-ISO 50006:2014

Energy management systems - Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) - General principles and guidance

Energiledelsessystemer - Måling av energiytelse ved bruk av energibasislinjer (EnB) og energiytelsesindikatorer (EnPl) - Generelle prinsipper og råd

Språk: en

NS-ISO 50015:2014

Energy management systems - Measurement and verification of energy performance of organizations - General principles and guidance

Energiledelsessystemer - Måling og verifisering av organisasjoners energiytelse - Generelle prinsipper og råd

Språk: en




NS-EN 50465:2008

Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW


29 Elektroteknikk


prEN 16840

Inland navigation vessels - Electrical shore connection, three-phase current 400 V, 50 Hz and at least 250 AInnlandsnavigasjonsfartøyer - Elektrisk shore tilkobling, tre-fase strøm 400 V, 50 Hz og minst 250 A



ISO/DIS 10656

Electric resistance welding - Transformers for welding guns with integrated transformers (robot guns)


ISO/DIS 10656

Resistance welding equipment -- Transformers -- Integrated transformers for welding guns


31 Elektronikk


NS-EN 16602-70-10:2015

Space product assurance - Qualification of printed circuit boards

Språk: en

NS-EN 16602-70-11:2015

Space product assurance - Procurement of printed circuit boards

Språk: en

33 Telekommunikasjon. Lyd- og videoteknikk

CEN Workshop Agreements

CWA 16871-1:2015

Requirements and Recommendations for Assurance in Cloud Security - Part 1: Contributed recommendations from European projectsSpråk: en

CWA 16874:2015

Verification of performance levels of EGNOS Enabled mass-market receivers

Språk: en


33 Telekommunikasjon. Lyd- og videoteknikk


CEN/TR 16671:2014

Information technology - Authorization of mobile phones when used as RFID interrogatorsInformasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere

Språk: en


NS-EN 16603-50-53:2015

Space engineering - SpaceWire - CCSDS packet transfer protocol

Språk: en

35 Informasjonsteknologi. Kontormaskiner


prEN 12896-1

Public transport - Reference data model - Part 1: Common concepts


prEN 12896-2

Road Transport and Traffic Telematics - Public Transport Reference Data Model - Part 2: Public Transport Network


prEN 12896-3

Intelligent transport systems - Reference data model - Part 3: Timing information and vehicle scheduling


prEN ISO 19119 rev

Geographic information - Services (ISO/DIS 19119:2015)Geografisk informasjon - Tjenester (ISO/DIS 19119:2015)



ISO/DIS 9241-940

Ergonomics of human-computer interaction -- Part 940: Evaluation of tactile and haptic interactions


ISO/DIS 9296.2

Acoustics -- Declared noise emission values of information technology and telecommunications equipmentAkustikk - Deklarerte verdier for støyemisjon fra informasjonsteknologi og telekommunikasjon


ISO/DIS 13374-4

Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation

Tilstandsovervåking og diagnostikk av maskiner - Databehandling, kommunikasjon og presentasjon - Del 4: Presentasjon




ISO/DIS 19119

Geographic information -- Services


ISO/DIS 19119

Geographic information -- Services


ISO/IEC DIS 8825-2

Information technology - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstrakt Syntax Notation One (ASN.1) - Part 2: Packed encoding rulesSpråk: enKommentarfrist: 2015-06-16

ISO-standarder

ISO/TR 17185-3:2015

Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperationSpråk: en

ISO/TR 17424:2015

Intelligent transport systems -- Cooperative systems -- State of the art of Local Dynamic Maps concepts

Språk: en

ISO/TR 80001-2-7:2015

Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1Språk: en

ISO/TS 16277-1:2015

Health informatics -- Categorial structures of clinical findings in traditional medicine -- Part 1: Traditional Chinese, Japanese and Korean medicineSpråk: en

ISO/TS 18790-1:2015

Health informatics -- Profiling framework and classification for Traditional Medicine informatics standards development -- Part 1: Traditional Chinese MedicineSpråk: en

ISO/TS 19321:2015

Intelligent transport systems -- Cooperative ITS -- Dictionary of in-vehicle information (IVI) data structures

Språk: en


CEN ISO/TS 25110:2013

Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013)

Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013)

Språk: en

CEN ISO/TR 9241-331:2013

Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012)

Språk: en



CEN ISO/TR 24014-2:2013

Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013)

Språk: en

CEN ISO/TR 24014-3:2013


CEN ISO/TR ISO 24014-3:2013


CEN ISO/TS 9241-411:2014

Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012)Språk: en

CEN ISO/TS 14265:2013

Health Informatics - Classification of purposes for processing personal health information (ISO/TS 14265:2011)

Språk: en

CEN ISO/TS 14441:2013

Health informatics - Security and privacy requirements of EHR systems for use in conformity assessment (ISO/TS 14441:2013)

Språk: en

CEN ISO/TS 17419:2014

Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013)

Språk: en

CEN ISO/TS 17423:2014

Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014)

Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013)

Språk: en

CEN ISO/TS 17427:2014

Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014)Språk: en

CEN ISO/TS 17444-2:2013

Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS 17444-2:2013)

Språk: en

CEN ISO/TS 18234-1:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013)Språk: en

CEN ISO/TS 18234-2:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013)Språk: en



CEN ISO/TS 18234-7:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013)Språk: en

CEN ISO/TS 18234-9:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 9: Traffic event compact (TPEG1-TEC) (ISO/TS 18234-9:2013)Språk: en

CEN ISO/TS 18234-10:2013

Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 10: Conditional access information (TPEG1-CAI) (ISO/TS 18234-10:2013)Språk: en

CEN ISO/TS 19321:2015

Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015)

Språk: en

CEN/TR 15449-4:2013

Geographic information - Spatial Data Infrastructure - Part 4: Service centric view

Språk: en

CEN/TR 15449-5:2015

Geographic information - Spatial data infrastructures - Part 5: Validation and testing

Språk: en

CEN/TR 15872:2014

Health informatics - Guidance on patient identification and cross-referencing of identities

Språk: en

CEN/TR 16669:2014

Information technology - Device interface to support ISO/IEC 18000-3Informasjonsteknologi - Enhetsgrensesnitt som støtter ISO/IEC 18000-3

Språk: en

CEN/TR 16670:2014

Information technology - RFID threat and vulnerability analysisInformasjonsteknologi - Analyse av trussel og sårbarhet for RFID

Språk: en

CEN/TR 16671:2014

Information technology - Authorization of mobile phones when used as RFID interrogatorsInformasjonsteknologi - Autorisasjon av mobiltelefoner når de brukes som RFID-sendere-mottakere

Språk: en

CEN/TR 16672:2014

Information technology - Privacy capability features of current RFID technologiesInformasjonsteknologi - Ytelsesegenskaper for personvern for gjeldende RFID-teknologier

Språk: en

CEN/TR 16673:2014

Information technology - RFID privacy impact assessment analysis for specific sectorsInformasjonsteknologi - Analyse av vurdering av personvernkonsekvenser ved RFID for spesifikke sektorer

Språk: en



CEN/TR 16674:2014

Information technology - Analysis of privacy impact assessment methodologies relevant to RFIDInformasjonsteknologi - Analyse av metoder for vurdering av personvernkonsekvenser som er relevante for RFID

Språk: en

CEN/TR 16684:2014

Information technology - Notification of RFID - Additional information to be provided by operatorsInformasjonsteknologi - Varsling av RFID - Tilleggsinformasjon som skal gis av operatører

Språk: en

CEN/TR 16690:2014

Electronic fee collection - Guidelines for EFC applications based on in-vehicle ITS stations

Språk: en

CEN/TR 16742:2014

Intelligent transport systems - Privacy aspects in ITS standards and systems in Europe

Språk: en

CEN/TS 13149-8:2013

Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communicationKollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon

Språk: en

CEN/TS 14014:2015

Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling

Språk: en

CEN/TS 15448:2014

Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)Språk: en

CEN/TS 15480-3:2014

Identification card systems - European Citizen Card - Part 3: European Citizen Card Interoperability using an application interfaceIdentitetskortsystem - Europeisk borgerkort - Del 3: Europeisk borgerkort interoperabilitet vedhjelp av applikasjonsgrensesnitt

Språk: en

CEN/TS 15480-5:2013

Identification card systems - European Citizen Card - Part 5: General IntroductionIdentitetskortsystem - Europeisk borgerkort - Del 5: Generell introduksjon

Språk: en

CEN/TS 16080:2013

Internet Content and communications filtering software and services

Språk: en

CEN/TS 16157-4:2014

Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 4: Variable Message Sign (VMS) PublicationsSpråk: en

CEN/TS 16157-5:2014

Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publicationsSpråk: en



CEN/TS 16454:2013

Intelligent transport systems - ESafety - ECall end to end conformance testingIntelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (eCall)

Språk: en

CEN/TS 16614-1:2014

Public transport - Network and Timetable Exchange (NeTEx) - Part 1: Public transport network topology exchange format

Kollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 1: Utveksling av data for nettverks- og rutestruktur

Språk: en

CEN/TS 16614-2:2014

Public transport - Network and Timetable Exchange (NeTEx) - Part 2: Public transport scheduled timetables exchange formatKollektivtransport - Utvekslingsformat for nettverks- og tidtabelldata (NeTEx) - Del 2: Utveksling av tidtabell- og vognløpsdata

Språk: en

CEN/TS 16634:2014

Personal identification - Recommendations for using biometrics in European Automated Border ControlPersonlig identifikasjon - Anbefalinger for bruk av biometri i europeisk automatisert grensekontrollsystem

Språk: en

CEN/TS 16658:2014

Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperabilitySpråk: en

CEN/TS 16685:2014

Information technology - Notification of RFID - The information sign to be displayed in areas where RFID interrogators are deployedInformasjonsteknologi - Varsling av RFID - Informasjonssignalet som skal vises i områder der det brukes RFID-sendere-mottakere

Språk: en

CEN/TS 16702-1:2014

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 1: Compliance checkingElektronisk avgiftsinnkreving - Sikker overvåking av autonome bomsystemer - Del 1: Samsvarskontroll

Språk: en

CEN/TS 16702-2:2015

Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder

Språk: en

CEN/TS 16794-1:2015

Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443Språk: en

CEN/TS 16794-2:2015

Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443

Språk: en

CEN/TS 419241:2014

Security Requirements for Trustworthy Systems Supporting Server SigningSikkerhetskrav - Tillitssystemer som støtter serversignering

Språk: en

CEN/TS 419261:2015

Security requirements for trustworthy systems managing certificates and time-stamps

Språk: en




NS-EN 2499:1987

Aerospace series - Computer output microfiche (COM) - A6 microfiche

Språk: en

NS-ISO/IEC 19784-1:2006

Information technology - Biometric application programming interface - Part 1: BioAPI specificationInformasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 1: BioAPI-spesifikasjon

Språk: en

NS-ISO/IEC 19784-1:2006/A1:2007

Amendment A1 - Information technology - Biometric application programming interface - Part 1: BioAPI specification - Amendment: BioGUI specification

Endringsblad A1 - Informasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 1: BioAPI-spesifikasjon - Endringsblad: BioGUI-spesifikasjon

Språk: en

NS-ISO/IEC 19784-1:2006/A2:2009

Amendment A2 - Information technology - Biometric application programming interface - Part 1: BioAPI specification - Amendment: Framework-free BioAPI

Endringsblad A2 - Informasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 1: BioAPI-spesifikasjon - Endringsblad: Rammeverk-fri BioAPI

Språk: en

NS-ISO/IEC 19784-1:2006/A3:2010

Amendment A3 - Information technology - Biometric application programming interface - Part 1: BioAPI specification - Amendment: Support for interchange of certificates and security assertions, and other security aspects

Endringsblad A3 - Informasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 1: BioAPI-spesifikasjon - Endringsblad: Støtte for sertifikatutveksling, sikkerhetsdeklarasjoner og andre sikkerhetsforhold

Språk: en

NS-ISO/IEC 19784-2:2007

Information technology - Biometric application programming interface - Part 2: Biometric archive function provider interface

Informasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 2: Leverandørgrensesnitt for biometrisk arkivfunksjon

Språk: en

NS-ISO/IEC 19784-4:2011

Information technology - Biometric application programming interface - Part 4: Biometric sensor function provider interface

Informasjonsteknologi - Programmeringsgrensesnitt for anvendelse av biometriske data (API) - Del 4: Leverandørgrensesnitt for biometrisk sensorfunksjon

Språk: en

NS-ISO/IEC 19794-1:2011

Information technology - Biometric data interchange formats - Part 1: FrameworkInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 1: Rammeverk

Språk: en

NS-ISO/IEC 19794-1:2011/A1:2013

Amendment A1 - Information technology - Biometric data interchange formats - Part 1: Framework - Amendment: Conformance testing methodology

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 1: Rammeverk - Endringsblad: Samsvarstestingsmetodologi

Språk: en

NS-ISO/IEC 19794-2:2011

Information technology - Biometric data interchange formats - Part 2: Finger minutiae dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 2: Finger minutiae-data

Språk: en



NS-ISO/IEC 19794-2:2011/A1:2013

Amendment A1 - Information technology - Biometric data interchange formats - Part 2: Finger minutiae data - Amendment: Conformance testing methodology and clarification of defects

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 2: Finger minutiae-data - Endringsblad: Samsvarstestingsmetodologi og avklaring av feil

Språk: en

NS-ISO/IEC 19794-2:2005

Information technology - Biometric data interchange formats - Part 2: Finger minutiae dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 2: Finger minutiae-data

Språk: en

NS-ISO/IEC 19794-2:2005/A1:2010

Amendment A1 - Information technology - Biometric data interchange formats - Part 2: Finger minutiae data - Amendment: Detailed description of finger minutiae location, direction, and type

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 2: Finger minutiae-data - Endringsblad: Detaljert beskrivelse av plassering, retning og type av finger minutiae

Språk: en

NS-ISO/IEC 19794-3:2006

Information technology - Biometric data interchange formats - Part 3: Finger pattern spectral dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 3: Spektraldata for fingermønster

Språk: en

NS-ISO/IEC 19794-4:2011

Information technology - Biometric data interchange formats - Part 4: Finger image dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 4: Fingeravbildingsdata

Språk: en

NS-ISO/IEC 19794-4:2011/A1:2013

Amendment A1 - Information technology - Biometric data interchange formats - Part 4: Finger image data - Amendment: Conformance testing methodology and clarification of defects

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 4: Fingeravbildingsdata - Endringsblad: Samsvarstestingsmetodologi og avklaring av feil

Språk: en

NS-ISO/IEC 19794-5:2011

Information technology - Biometric data interchange formats - Part 5: Face image dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 5: Ansiktsavbildingsdata

Språk: en

NS-ISO/IEC 19794-5:2011/A1:2014

Amendment A1 - Information technology - Biometric data interchange formats - Part 5: Face image data - Amendment: Conformance testing methodology and clarification of defects

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 5: Ansiktsavbildingsdata - Endringsblad: Samsvarstestingsmetodologi og avklaring av feil

Språk: en

NS-ISO/IEC 19794-5:2005

Information technology - Biometric data interchange formats - Part 5: Face image dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 5: Ansiktsavbildingsdata

Språk: en

NS-ISO/IEC 19794-6:2011

Information technology - Biometric data interchange formats - Part 6: Iris image dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 6: Irisavbildingsdata

Språk: en



NS-ISO/IEC 19794-7:2014

Information technology - Biometric data interchange formats - Part 7: Signature/sign time series dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 7: Signatur-/merke-tidsseriedata

Språk: en

NS-ISO/IEC 19794-7:2007

Information technology - Biometric data interchange formats - Part 7: Signature/sign time series dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 7: Signatur-/merke-tidsseriedata

Språk: en

NS-ISO/IEC 19794-8:2011

Information technology - Biometric data interchange formats - Part 8: Finger pattern skeletal dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 8: Strukturdata for fingermønster

Språk: en

NS-ISO/IEC 19794-8:2011/A1:2014

Amendment A1 - Information technology - Biometric data interchange formats - Part 8: Finger pattern skeletal data - Amendment: Conformance testing methodology

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 8: Strukturdata for fingermønster - Endringsblad: Samsvarstestingsmetodologi

Språk: en

NS-ISO/IEC 19794-9:2011

Information technology - Biometric data interchange formats - Part 9: Vascular image dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 9: Vaskulære avbildingsdata

Språk: en

NS-ISO/IEC 19794-9:2011/A1:2013

Amendment A1 - Information technology - Biometric data interchange formats - Part 9: Vascular image data - Amendment: Conformance testing methodology

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 9: Vaskulære avbildingsdata - Endringsblad: Samsvarstestingsmetodologi

Språk: en

NS-ISO/IEC 19794-10:2007

Information technology - Biometric data interchange formats - Part 10: Hand geometry silhouette dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 10: Silhuettdata for håndgeometri

Språk: en

NS-ISO/IEC 19794-11:2013

Information technology - Biometric data interchange formats - Part 11: Signature/sign processed dynamic dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 11: Dynamisk framstilte data fra signatur/merke

Språk: en

NS-ISO/IEC 19794-11:2013/A1:2014

Amendment A1 - Information technology - Biometric data interchange formats - Part 11: Signature/sign processed dynamic data - Amendment: Conformance test assertions

Endringsblad A1 - Informasjonsteknologi - Utvekslingsformater for biometriske data - Del 11: Dynamisk framstilte data fra signatur/merke - Endringsblad: Samsvarstestdeklarasjoner

Språk: en

NS-ISO/IEC 19794-14:2013

Information technology - Biometric data interchange formats - Part 14: DNA dataInformasjonsteknologi - Utvekslingsformater for biometriske data - Del 14: DNA-data

Språk: en



NS-ISO/IEC 27031:2011

Information technology - Security techniques - Guidelines for information and communication technology readiness for business continuity

Informasjonsteknologi - Sikringsteknikker - Retningslinjer for informasjons- og kommunikasjonsteknologiberedskap for forretningskontinuitet

Språk: en

NS-ISO/IEC 27036-1:2014

Information technology - Security techniques - Information security for supplier relationships - Part 1: Overview and conceptsInformasjonsteknologi - Sikringsteknikker - Informasjonssikring i forhold med avtaler om tjenester - Del 1: Oversikt og begreper

Språk: en

NS-ISO/IEC 27036-2:2014

Information technology - Security techniques - Information security for supplier relationships - Part 2: RequirementsInformasjonsteknologi - Sikringsteknikker - Informasjonssikring i forhold med avtaler om tjenester - Del 2: Krav

Språk: en

NS-ISO/IEC 27036-3:2013

Information technology - Security techniques - Information security for supplier relationships - Part 3: Guidelines for information and communication technology supply chain security

Informasjonsteknologi - Sikringsteknikker - Informasjonssikring i forhold med avtaler om tjenester - Del 3: Retningslinjer for sikring av leveringskjeder for informasjons- og kommunikasjonsteknologi

Språk: en

NS-ISO/IEC 27038:2014

Information technology - Security techniques - Specification for digital redactionInformasjonsteknologi - Sikringsteknikker - Spesifikasjon for digital retusjering

Språk: en

NS-ISO/IEC 27040:2015

Information technology - Security techniques - Storage securityInformasjonsteknologi - Sikringsteknikker - Sikker lagring

Språk: en

37 Bildeteknikk


ISO/DIS 12632

Graphic technology -- Ink, paper and labels -- Requirements on hot alkali penetration and resistance


ISO-standarder

ISO 9022-11:2015

Optics and photonics -- Environmental test methods -- Part 11: Mould growth


ISO 9022-12:2015

Optics and photonics -- Environmental test methods -- Part 12: Contamination



37 Bildeteknikk

ISO 9022-14:2015

Optics and photonics -- Environmental test methods -- Part 14: Dew, hoarfrost, ice


ISO 9022-17:2015

Optics and photonics -- Environmental test methods -- Part 17: Combined contamination, solar radiation


ISO 15781:2015

Photography -- Digital still cameras -- Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time


ISO 17957:2015

Photography -- Digital cameras -- Shading measurements

Språk: en

ISO 19012-3:2015

Microscopes -- Designation of microscope objectives -- Part 3: Spectral transmittance

Språk: en


NS-EN 2499:1987

Aerospace series - Computer output microfiche (COM) - A6 microfiche

Språk: en

NS-EN 2547:1987

Aerospace series - Filming of documents - Microfilm 105 mm (microfiche A6)

Språk: en

43 Kkjøretøyteknikk


ISO/DIS 6621-1



ISO/DIS 6621-1



ISO/DIS 6624-1

Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron


ISO/DIS 6624-3

Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel




ISO/DIS 6624-1

Internal combustion engines - Piston rings - Part 1: Keystone rings made of cast iron (Revision of first edition (ISO 6624-1:1986)


ISO/DIS 6624-3

Internal combustion engines - Piston rings - Part 3: Keystone rings made of steel


ISO/DIS 6626-3

Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded and nitrided oil control rings made of steel


ISO/DIS 6626-3

Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded oil control rings made of steel


ISO/DIS 12219-6

Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber methodSpråk: enKommentarfrist: 2015-08-16

ISO/DIS 12619-4

Road vehicles -- Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components -- Part 4: Check ValveSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 12619-5

Road vehicles -- Compressed gaseous Hydrogen (CGH2) and Hydrogen/Natural gas blends fuel system components -- Part 5: Manual cylinder valveSpråk: enKommentarfrist: 2015-08-01

ISO/DIS 15765-2

Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 2: Network layer services


ISO/DIS 15765-4

Road vehicles - Diagnostics on Controller Area Networks (CAN) - Part 4: Requirements for emission-related systems


ISO-standarder

ISO 3537:2015

Road vehicles -- Safety glazing materials -- Mechanical tests


ISO 8820-5:2015

Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures




ISO 8820-10:2015

Road vehicles -- Fuse-links -- Part 10: Fuse-links with tabs Type L (high current miniature)

Språk: en

ISO 10924-3:2015

Road vehicles -- Circuit breakers -- Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11

Språk: en

ISO 16505:2015

Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures

Språk: en

ISO 17447-1:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugsSpråk: enErstatter A00008:20:020089,A00008:20:020090,A00008:20:042942,A00008:20:043934,A00008:20:050144,A00008:20:059787

ISO 17447-2:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugsSpråk: enErstatter A00008:20:042942,A00008:20:043934,A00008:20:050144,A00008:20:059787

ISO 17447-3:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 3: Tests and requirements

Språk: en

ISO 27145-6:2015

Road vehicles -- Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements -- Part 6: External test equipmentSpråk: en

ISO/TS 19321:2015

Intelligent transport systems -- Cooperative ITS -- Dictionary of in-vehicle information (IVI) data structures

Språk: en


CEN ISO/TS 19321:2015

Intelligent transport systems - Cooperative ITS - Dictionary of in-vehicle information (IVI) data structure (ISO/TS 19321:2015)

Språk: en

CEN/TR 16596:2013

Electric-electronic interface between chassis-cab and bodywork of refuse collection vehicles (RCVs)

Språk: en

CEN/TS 13149-8:2013

Public transport - Road vehicle scheduling and control systems - Part 8: Physical layer for IP communicationKollektivtransport - Ruteplanleggings- og kontrollsystemer for kjøretøy - Del 8: Fysisk lag for IP-kommunikasjon

Språk: en

CEN/TS 16635:2014

Railway application - Design for PRM Use - Equipment and Components onboard Rolling Stock - ToiletsJernbane - Utforming for funksjonshemmede - Utstyr og komponenter ombord på rullende materiell - Toaletter

Språk: en


45 Jernbaneteknikk

45 Jernbaneteknikk


prEN 12080

Railway applications - Axleboxes - Rolling bearingsJernbane - Akselkasser - Rullelagre


prEN 12082

Railway applications - Axleboxes - Performance testingJernbane - Akselkasser - Prøving av ytelse


prEN 13715

Railway applications - Wheelsets and bogies - Wheels - Tread profileJernbane - Hjulsett og boggier - Hjul - Kantprofil


prEN 16186-2

Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators


prEN 16186-2

Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators


prEN 16834

Railway applications - Braking - Brake performance


prEN 16839

Railway applications - Rolling stock - Head stock layout


prEN 16860

Railway Applications - Requirements and general principles for securing payload in rail freight transport



NS-EN 12929-1:2015

Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Generelle krav - Del 1: Krav for alle installasjoner

Språk: en


45 Jernbaneteknikk

NS-EN 12929-2:2015

Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Generelle krav - Del 2: Tilleggskrav for to-tauspendelbaner uten fangbrems

Språk: en

NS-EN 12930:2015

Safety requirements for cableway installations designed to carry persons - CalculationsSikkerhetskrav for taubaneinstallasjoner for persontransport - Beregninger

Språk: en

NS-EN 13243:2015

Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systemsSikkerhetskrav for taubaneinstallasjoner for persontransport - Elektrisk utstyr til annet enn drivsystemer

Språk: en


NS-EN 12929-1:2004

Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Generelle krav - Del 1: Krav for alle installasjoner


NS-EN 12929-2:2004

Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Generelle krav - Del 2: Tilleggskrav for to-tauspendelbaner uten fangbrems


NS-EN 12930:2004

Safety requirements for cableway installations designed to carry persons - CalculationsSikkerhetskrav for taubaneinstallasjoner for persontransport - Beregninger


NS-EN 13243:2004

Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems (Corrigendum AC:2005 incorporated)

Sikkerhetskrav for taubaneinstallasjoner for persontransport - Elektrisk utstyr til annet enn drivsystemer (innbefattet rettelsesblad AC:2005)


47 Skipsbygging og marine konstruksjoner


prEN 711

Inland navigation vessels - Railings for decks and side decks - Requirements, typesInnlandsnavigasjonsfartøyer - Rekkverk for dekk og sidedekk - Krav, typer




prEN 16840



prEN ISO/IEC 16315

Small craft - Electric propulsion system (ISO/IEC/DIS 16315:2012)


prEN ISO 16315

Small craft - Electric propulsion system (ISO/DIS 16315:2015)


prEN ISO 16315



prEN ISO 16315




ISO 21487:2012/DAmd 2


ISO/DIS 484-1

Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 1: Propellers of diameter greater than 2,50 m


ISO/DIS 484-2

Shipbuilding -- Ship screw propellers -- Manufacturing tolerances -- Part 2: Propellers of diameter between 0,80 and 2,50 m inclusiveSpråk: enKommentarfrist: 2015-06-23

ISO/DIS 13073-3

Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal processSpråk: enKommentarfrist: 2015-07-31

ISO/DIS 15364

Ships and marine technology -- Pressure/vacuum valves for cargo tanks


ISO/DIS 17905.2

Ships and marine technology - Installation, inspection and maintenance of container securing devices for ships




ISO/DIS 18079-1

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General


ISO/DIS 18079-2

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 2: Inflatable life rafts


ISO/DIS 18079-3

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets


ISO/DIS 18079-4

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 4: Marine evacuation systems


ISO/DIS 18079-5

Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 5: Inflated rescue boats


ISO/DIS 22472

Ships and marine technology -- Guidelines for the installation of voyage data recorder (VDR)


ISO/DIS 22472

Ships and marine technology -- Guidelines for the operation and installation of voyage data recorders (VDR)


ISO-standarder

ISO/PAS 18215:2012

Ships and marine technology -- Vessel machinery operations in polar waters -- Guidelines

Språk: en

49 Luft- og romfartsteknikk


ISO/DIS 22642

Space data and information transfer systems -- TC (telecommand) synchronization and channel coding


ISO-standarder

ISO 18197:2015

Space systems -- Space based services requirements for centimetre class positioning

Språk: en




CEN/TS 16650:2014

Specification for hose couplings for petrol, oil and lubricants - High pressure couplings

Språk: en


NS-EN 2009:1984

Bearings, airframe rolling, rigid, single row ball bearings in steel, diameter series 8 and 9 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2011:1984

Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2012:1984

Bearings, airframe rolling, rigid, single row ball bearings in steel, diameter series 0 and 2 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2014:1984

Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2017:1984

Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2018:1984

Bearings, airframe rolling, single row, self aligning roller bearings in steel, diameter series 3 and 4 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2020:1984

Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace seriesSpråk: en

NS-EN 2544:1987

Aerospace series - Representation of rivets on drawings for aerospace equipment

Språk: en

NS-EN 3645-003:2015

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle square flange mounting - Product standardSpråk: en

NS-EN 3645-008:2015

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling operating temperature 175 °C or 200 °C continuous - Part 008: Non release plug with grounding ring - Product standardSpråk: en



NS-EN 4674-001:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 001: Technical specification

Språk: en

NS-EN 4674-002:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 002: General and list of product standardSpråk: en

NS-EN 4674-003:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 003: Open sleeve - Inside pressurized area - EMI protection 5 kA - Temperature range – 65 °C to 200 °C - Product standardSpråk: en

NS-EN 4674-004:2015

Aerospace series - Electrical cables, installation - Self-wrapping shielding (EMI) protective sleeve - Part 004: Open sleeve - Outside pressurized area - EMI protection 10 kA - Temperature range – 65 °C to 200 °C - Product standardSpråk: en

NS-EN 9110:2015


Språk: en

NS-EN 16601-00-01:2015

Space systems - Glossary of terms

Språk: en

NS-EN 16601-10:2015

Space project management - Project planning and implementation

Språk: en

NS-EN 16602-70-08:2015

Space product assurance - Manual soldering of high-reliability electrical connections

Språk: en

NS-EN 16602-70-09:2015

Space product assurance - Measurements of thermo-optical properties of thermal control materials

Språk: en

NS-EN 16602-70-10:2015

Space product assurance - Qualification of printed circuit boards

Språk: en

NS-EN 16602-70-11:2015

Space product assurance - Procurement of printed circuit boards

Språk: en

NS-EN 16602-70-13:2015

Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes

Språk: en

NS-EN 16602-70-50:2015

Space product assurance - Particles contamination monitoring for spacecraft systems and cleanrooms

Språk: en

NS-EN 16602-70-53:2015

Space product assurance - Materials and hardware compatibility tests for sterilization processes

Språk: en



NS-EN 16603-10-04:2015

Space engineering - Space environment

Språk: en

NS-EN 16603-50-53:2015

Space engineering - SpaceWire - CCSDS packet transfer protocol

Språk: en

NS-EN 16603-70:2015

Space engineering - Ground systems and operations

Språk: en

NS-EN 16603-70-01:2015

Space engineering - On-board control procedures

Språk: en

NS-EN 16603-70-11:2015

Space engineering - Space segment operability

Språk: en

NS-EN 16603-70-31:2015

Space engineering - Ground systems and operations - Monitoring and control data definition

Språk: en


NS-EN 3645-003:2006

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ░C or 200 ░C continuous - Part 003: Receptacle square flange mounting - Product standardSpråk: enIngen erstatning

NS-EN 3645-008:2007

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 ░C or 200 ░C continuous - Part 008: Non release plug with grounding ring - Product standardSpråk: enIngen erstatning

NS-EN 9110:2010



NS-EN 9111:2005

Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000)


NS-EN 9121:2009

Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000)


NS-EN 13290-2:2001

Space project management - General requirements - Part 2: Project breakdown structureLedelse av romfartsprosjekt - Generelle krav - Del 2: Prosjektstruktur




NS-EN 13290-3:2001

Space project management - General requirements - Part 3: Project organizationLedelse av romfartsprosjekt - Generelle krav - Del 3: Prosjektorganisasjon


NS-EN 13290-4:2001

Space project management - General requirements - Part 4: Project phasing and planningLedelse av romfartsprosjekt - Generelle krav - Del 4: Planlegging og inndeling i prosjektfaser


NS-EN 13701:2001

Space systems - Glossary of termsRomsystemer - Terminologi


NS-EN 14092:2002

Space engineering - Space environmentRomfartsteknikk - Romfartsmiljø


NS-EN 14099:2001

Space product assurance - Measurement of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapesSikring av romprodukter - Måling av flerre- og avrivningsstyrke for belegg og overflater ved bruk av trykkfølsom tape


NS-EN 14737-1:2004

Space engineering - Ground systems and operations - Part 1: Principles and requirementsRomfartsteknikk - Jordingssystemer og operasjoner - Del 1: Prinsipper og krav


NS-EN 14737-2:2004

Space engineering - Ground systems and operations - Part 2: Documents requirements definitions (DRDs)Romfartsteknikk - Jordingssystemer og operasjoner - Del 2: Definisjoner av krav i dokumenter (DRDs)


53 Utstyr for godshåndtering


prEN 16842-1

Powered industrial trucks - Visibilty - Test method for verification - Part 1: General requirements


prEN 16842-2

Powered industrial trucks - Visibility - Test method for verification - Part 2: Sit-on counter balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacitySpråk: enKommentarfrist: 2015-06-12


53 Utstyr for godshåndtering

prEN 16851

Cranes - Light crane systems



ISO/DIS 4301-1

Cranes and lifting appliances -- Classification -- Part 1: General


ISO/DIS 6405-1

Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols


ISO/DIS 11031.2

Cranes -- Principles for seismically resistant design


55 Emballasje og varedistribusjon


prEN 16860

Railway Applications - Requirements and general principles for securing payload in rail freight transport


ISO-standarder

ISO 23560:2015

Woven polypropylene sacks for bulk packaging of foodstuffs



NS-EN 23-1:1978

Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibre boardPakker for vaske- og rengjøringspulver - Dimensjoner og volumer for esker og dunker av fiberpapp

Språk: en

NS-EN 76:1978

Packages for certain prepacked foodstuffs - Capacities of glass and metal containersPakker for bestemte ferdigpakkede matvarer - Volum av glass- og metallbeholdere

Språk: en


59 Tekstil- og lærteknikk



prEN ISO 1421

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO/DIS 1421:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av strekkfasthet og bruddforlengelse (ISO/DIS 1421:2015)


prEN ISO 2286-2 rev

Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO/DIS 2286-2:2015)

Gummi- eller plastbelagte tekstiler - Bestemmelse av rulleegenskaper - Del 2: Metoder for bestemmelse av totalmasse per arealenhet, masse per arealenhet av belegg og masse per arealenhet av substratet (ISO/DIS 2286-2:2015)


prEN ISO 2286-3 rev

Rubber–or plastic–coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO/DIS 2286-3:2015)

Gummi- eller plastbelagte tekstiler - Bestemmelse av rulleegenskaper - Del 3: Metode for bestemmelse av tykkelse (ISO/DIS 2286-3:2015)


prEN ISO 4674-1

Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO/DIS 4674-1:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av rivestyrke - Del 1: Konstant hastighet av rivemetoder (ISO/DIS 4674-1:2015)


prEN ISO 5470-1 rev

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO/DIS 5470-1:2015)Gummi- eller plastbelagte tekstiler - Bestemmelse av slitestyrke - Del 1: Taber abrader (ISO/DIS 5470-1: 2015)


prEN ISO 14362-1

Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO 24362-1:2015)

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 1: Påvisning av bruk av visse azofargestoffer tilgjengelig med eller uten ekstraksjon av fibrene (ISO 24362-1:2015)


prEN ISO 14362-3

Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Detection of the use of certain azo colorants, which may release 4-aminoazobenzene (ISO/DIS 14362-3:2015)

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Påvisning av bruk av visse azofargestoffer, som kan frigjøre 4-aminoazobenzene (ISO/DIS 14362-3: 2015)





ISO/DIS 1420

Rubber- or plastics-coated fabrics - Determination of resistance to penetration by water [Revision of second edition (ISO 1420:1987)]Språk: enKommentarfrist: 2015-08-01

ISO/DIS 1421

Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break


ISO/DIS 2286-2

Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, coating mass per unit area, and mass per unit area of the substrateSpråk: enKommentarfrist: 2015-06-12

ISO/DIS 2286-3

Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for the determination of thickness


ISO/DIS 4674-1

Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (Revision of ISO 4674:1977)

Gummi- eller plastbelagte materialer - Bestemmelse av rivemotstand - Del 1: Metode med konstant hastighet på riving


ISO/DIS 5470-1

Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (Revision of first edition (ISO 5740:1980))Språk: enKommentarfrist: 2015-06-25

ISO/DIS 14362-1

Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres

Tekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 1: Påvisning av bruk av visse azofargestoffer tilgjengelig med eller uten ekstraksjon av fibrene


ISO/DIS 14362-3

Textiles -- Methods for determination of certain aromatic amines derived from azo colorants -- Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene

ekstiler - Metoder for bestemmelse av visse aromatiske aminer fra azofargestoffer - Del 3: Påvisning av bruk av visse azofargestoffer, som kan frigi 4-aminoazobenzene


ISO/DIS 18264

Textile slings -- Lifting slings for general purpose lifting operations made from fibre ropes -- High Modulus PolyEthylene (HMPE)Tekstilslings - Løftestropper for generell løfteoperasjon laget av fibertau - High Modulus polyetylen (HMPE)




ISO-standarder

ISO 15701:2015

Leather -- Tests for colour fastness -- Colour fastness to migration into polymeric material


ISO 17234-1:2015

Leather -- Chemical tests for the determination of certain azo colorants in dyed leathers -- Part 1: Determination of certain aromatic amines derived from azo colorantsSpråk: enErstatter A00008:20:050111

ISO 23771:2015

Textile machinery -- Guide to the design of textile machinery for reduction of the noise emissions

Språk: en


CEN/TS 14416:2014

Geosynthetic barriers - Test method for determining the resistance to rootsGeosyntetiske membraner - Prøvingsmetode for bestemmelse av motstand mot røtter

Språk: en

CEN/TS 14417:2014

Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriersSpråk: en

CEN/TS 14418:2014

Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriersSpråk: en

CEN/TS 16641:2014

Textile floor coverings - Guidelines for acceptable colour deviations

Språk: en

CEN/TS 16717:2015

Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athleteSpråk: en


NS-EN 13249:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av veger og andre trafikkarealer (unntatt jernbaner og asfaltdekker)

Språk: en

NS-EN 13250:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of railwaysGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av jernbaner

Språk: en



NS-EN 13251:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structuresGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved grunnarbeider, fundamenter og støttekonstruksjoner

Språk: en

NS-EN 13252:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in drainage systemsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper i dreneringssystemer

Språk: en

NS-EN 13253:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved erosjonsforebyggende arbeider (kystsikring, elveforbygninger)

Språk: en

NS-EN 13254:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and damsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av reservoarer og dammer

Språk: en

NS-EN 13255:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of canalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av kanaler

Språk: en

NS-EN 13256:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av tunneler og undergrunnskonstruksjoner

Språk: en

NS-EN 13257:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved deponering av fast avfall

Språk: en

NS-EN 13265:2014+A1:2015

Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projectsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved inneslutning av flytende avfall

Språk: en

NS-EN ISO 17070:2015

Leather - Chemical tests - Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content (ISO 17070:2015)

Lær - Kjemiske prøvinger - Bestemmelse av tetraklorfenol-, triklorfenol-, diklorfenol-, monoklorofenol-isomer- og pentaklorfenolinnhold (ISO 17070:2015)

Språk: en


NS-EN 13249:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av veger og andre trafikkarealer (unntatt jernbaner og asfaltdekker)




NS-EN 13250:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of railwaysGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av jernbaner


NS-EN 13251:2014

Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structuresGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved grunnarbeider, fundamenter og støttekonstruksjoner


NS-EN 13252:2014

Geotextiles and geotextile-related products - Characteristics required for use in drainage systemsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper i dreneringssystemer


NS-EN 13253:2014

Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved erosjonsforebyggende arbeider (kystsikring, elveforbygninger)


NS-EN 13254:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and damsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av reservoarer og dammer


NS-EN 13255:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of canalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av kanaler


NS-EN 13256:2014

Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures

Geotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved bygging av tunneler og undergrunnskonstruksjoner


NS-EN 13257:2014

Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposalsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved deponering av fast avfall


NS-EN 13265:2014

Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projectsGeotekstiler og geotekstilrelaterte produkter - Krav til egenskaper ved inneslutning av flytende avfall




NS-EN ISO 17070:2006

Leather - Chemical tests - Determination of pentachlorophenol content (ISO 17070:2006)Lær - Kjemiske prøvinger - Bestemmelse av pentaklorofenolinnhold (ISO 17070:2006)


61 Konfeksjonsindustri

ISO-standarder

ISO/TS 19407:2015

Footwear -- Sizing -- Conversion of sizing systems

Språk: en

ISO/TS 19408:2015

Footwear -- Sizing -- Vocabulary and terminology

Språk: en


CEN ISO/TS 16189:2013

Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethylformamide in footwear materials (ISO/TS 16189:2013)

Fottøy - Kritiske stoffer potensielt til stede i skotøy og fottøy komponenter - Prøvingsmetode for å kvantitativt bestemme dimethylformamid i skomaterialer (ISO/TS 16189:2013)

Språk: en

CEN ISO/TS 16190:2013

Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials (ISO/TS 16190:2013)

Fottøy - Kritiske stoffer potensielt til stede i skotøy og fottøy komponenter - Prøvings metode for å kvantitativt bestemme polysykliske aromatiske hydrokarboner (PAH) i fottøymaterialer (ISO/DTS 16190:2013)

Språk: en

CEN/TR 16792:2014

Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety

Språk: en

65 Landbruk


EN 16318:2013/prA1

Fertilizers and liming materials - Determination of chromium (VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B)Språk: enKommentarfrist: 2015-08-02

prEN 1482-3

Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps



65 Landbruk

prEN 13684

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - SafetyHageutstyr - Kultivatorer og luftingsapparater - Sikkerhet


prEN 15477

Fertilizers - Determination of the water-soluble potassium contentGjødsel - Bestemmelse av innhold av vannløselig kalium


prEN 16847

Fertilizers - Determination of complexing agents in fertilizers - Identification of heptagluconic acid by chromatography


prEN ISO 4254-5

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO/DIS 4254-5:2015)Landbruksmaskiner - Sikkerhet - Del 5: Strømdrevet jordarbeidende maskiner (ISO/DIS 4254-5: 2015)


prEN ISO 4254-8

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO/DIS 4254-8:2015)Landbruksmaskiner - Sikkerhet - Del 8: Solid gjødsel (ISO/DIS 4254-8: 2015)


prEN ISO 4254-9

Agricultural machinery - Safety - Part 9: Seed drills (ISO/DIS 4254-9:2015)Landbruksmaskiner - Sikkerhet - Del 9: Såmaskiner (ISO/DIS 4254-9: 2015)



ISO/DIS 3767-3

Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipmentSpråk: enKommentarfrist: 2015-08-04

ISO/DIS 5682-1

Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles


ISO/DIS 5682-2

Equipment for crop protection -- Spraying equipment -- Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayer liquid delivery systemsSpråk: enKommentarfrist: 2015-06-18

ISO/DIS 24631-1

Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)Språk: enKommentarfrist: 2015-08-04


65 Landbruk

ISO/DIS 24631-1

Radiofrequency identification of animals -- Part 1: Evaluation of conformance of RFID transponders with ISO 11784 and ISO 11785 (including granting and use of a manufacturer code)Språk: enKommentarfrist: 2015-10-01

ISO/DIS 24631-2

Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785


ISO/DIS 24631-2

Radiofrequency identification of animals -- Part 2: Evaluation of conformance of RFID transceivers with ISO 11784 and ISO 11785


ISO/DIS 24631-3

Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-3

Radiofrequency identification of animals -- Part 3: Evaluation of performance of RFID transponders conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-10-01

ISO/DIS 24631-4

Radio frequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-08-04

ISO/DIS 24631-4

Radiofrequency identification of animals -- Part 4: Evaluation of performance of RFID transceivers conforming with ISO 11784 and ISO 11785Språk: enKommentarfrist: 2015-10-01

ISO-standarder

ISO 8084:2003/Amd 1:2015

Språk: en

67 Næringsmiddelteknologi


prEN 14176

Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detectionMatvarer - Bestemmelse av domoinsyre i rå skalldyr, rå fisk og kokte skjell med RP-HPLC ved UV bestemmelse




prEN 14526

Foodstuffs - Determination of saxitoxin-group toxins in shellfish - HPLC method using pre-column derivatization with peroxide or periodate oxidation

Matvarer - Bestemmelse av saxitoxin-gruppe toksiner i skalldyr - HPLC metode ved bruk av pre-kolonne derivasjon med peroksid eller periodat oksidasjon


prEN 14944-1

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters

Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere


prEN 14944-1 rev

Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parametersSpråk: enKommentarfrist: 2015-08-02

prEN 14944-3


prEN 14944-3 rev


prEN 16852

Foodstuffs - Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks - GC-MS method


prEN 16857

Foodstuffs - Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS)Språk: enKommentarfrist: 2015-08-23

prEN 16858

Foodstuffs - Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS)Språk: enKommentarfrist: 2015-08-31

prEN 16889

Food hygiene - Production and dispense of hot beverages from hot beverage appliances - Hygiene requirements, migration test




ISO-standarder

ISO 6647-1:2015

Rice -- Determination of amylose content -- Part 1: Reference method


ISO 6647-2:2015

Rice -- Determination of amylose content -- Part 2: Routine methods


ISO 8455:2011/Amd 1:2015

Språk: en

ISO 11056:1999/Amd 2:2015

Språk: en

ISO/TR 17623:2015

Molecular biomarker analysis -- SSR analysis of maize

Språk: en


CEN/TR 16699:2014

Foodstuffs - Determination of pesticide residues by GC-MS/MS - Tandem mass spectrometric parameters

Språk: en

CEN/TS 16621:2014

Food analysis - Determination of benzo[a]pyrene, benz[a]anthracene, chrysene and benzo[b]fluoranthene in foodstuffs by high performance liquid chromatography with fluorescence detection (HPLC-FD)Språk: en

CEN/TS 16707:2014

Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Polymerase chain reaction (PCR) based screening strategies

Matvarer - Metoder for å påvise genetisk modifiserte organismer og avledete produkter - Polymerase kjedereaksjon (PCR) baserte kartleggingsstrategier

Språk: en

CEN/TS 16731:2014

Foodstuffs - Determination of hydride-reactive arsenic compounds in rice by atomic absorption spectrometry (Hydride-AAS) following acid extraction

Matvarer – Bestemmelse av hydridreaktive arsenikkforbindelser i ris ved atomabsorpsjonsspektrometri (Hydrid-AAS) etterfølgende syreekstraksjon

Språk: en


NS-EN 15768:2015


Språk: en

NS-EN ISO 5527:2015

Cereals - Vocabulary (ISO 5527:2015)Korn - Terminologi (ISO 5527:2015)

Språk: en



NS-EN ISO 5943:2006

Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2004)Ost og smelteost - Bestemmelse av kloridinnhold - Metode med potensiometrisk titrering (ISO 5943:2004)

Språk: en


NS-EN 14333-1:2004

Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 1: HPLC method with solid phase extraction clean up

Ikke-fettholdige næringsmidler - Bestemmelse av rester av benzimidazol-fungicidenkarbendazim, tiabendazol og benomyl (som karbendazim) - Del 1: HPLC-metode etter opprensing ved fast-faseekstraksjon


NS-EN 14333-2:2004

Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 2: HPLC method with gel permeation chromatography clean up

Ikke-fettholdige næringsmidler - Bestemmelse av rester av benzimidazol-fungicidenkarbendazim, tiabendazol og benomyl (som karbendazim) - Del 2: HPLC-metode etter opprensing ved gelfiltrering


NS-EN 14333-3:2004

Non fatty foods - Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) - Part 3: HPLC method with liquid/liquid-partition clean up

Ikke-fettholdige næringsmidler - Bestemmelse av rester av benzimidazol-fungicidenkarbendazim, tiabendazol og benomyl (som karbendazim) - Del 3: HPLC-metode etter opprensing ved væske-væske-ekstraksjon


71 Kjemiteknikk


prEN 16785-2

Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method



ISO/DIS 4802-1

Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 1: Determination by titration method and classificationSpråk: enKommentarfrist: 2015-06-04

ISO/DIS 4802-2

Glassware -- Hydrolytic resistance of the interior surfaces of glass containers -- Part 2: Determination by flame spectrometry and classificationSpråk: enKommentarfrist: 2015-06-04


71 Kjemiteknikk

ISO/DIS 18516

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolutionSpråk: enKommentarfrist: 2015-05-26

ISO/DIS 19950

Aluminium oxide primarily used for the production of aluminium -- Determination of alpha alumina content -- Method using X-ray diffraction net peak areasSpråk: enKommentarfrist: 2015-05-26

ISO-standarder

ISO 7504:2015

Gas analysis -- Vocabulary


ISO 14707:2015

Surface chemical analysis -- Glow discharge optical emission spectrometry (GD-OES) -- Introduction to use


ISO 16560:2015

Surface active agents -- Determination of polyethylene glycol content in nonionic ethoxylated surfactants -- HPLC method

Språk: en

ISO 17786:2015

Dimethyl ether (DME) for fuels -- Determination of high temperature (105°C) evaporation residues -- Mass analysis method

Språk: en

ISO 18118:2015

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Guide to the use of experimentally determined relative sensitivity factors for the quantitative analysis of homogeneous materialsSpråk: enErstatter A00008:20:029146

ISO 18321:2015

Essential oils -- Determination of peroxide value

Språk: en

ISO/TR 79:2015

Reference materials - Examples of reference materials for qualitative properties

Språk: en


CEN ISO/TR 24475:2013

Cosmetics - Good Manufacturing Practices - General training document (ISO/TR 24475:2010)

Språk: en

CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)Språk: en


71 Kjemiteknikk

CEN/TR 16589:2013

Laboratory installations - Capture devices with articulated extract armLaboratorieinstallasjoner - Gripeenheter med leddet ekstrakt arm

Språk: en

CEN/TR 16663:2014

Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field methodSpråk: en

CEN/TS 12404:2015

Durability of wood and wood-based products - Assessment of the effectiveness of a masonry fungicide to prevent growth into wood of Dry Rot Serpula lacrymans (Schumacher ex Fries) S.F. Gray - Laboratory methodSpråk: en

CEN/TS 16640:2014


Språk: en


NS-EN 15768:2015


Språk: en

NS-EN ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 1: Generelle krav (ISO 10439-1:2015)

Språk: en

NS-EN ISO 10439-2:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 2: Ikke-integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-2:2015)

Språk: en

NS-EN ISO 10439-3:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 3: Integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-3:2015)

Språk: en

NS-EN ISO 10439-4:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 4: Ekspansjonskompressorer (ISO 10439-4:2015)

Språk: en

NS-EN ISO 10628-1:2015


Språk: en


73 Gruvedrift og mineraler

73 Gruvedrift og mineraler


ISO/DIS 13543

Copper, lead and zinc sulfide concentrates - Determination of mass of contained metal in a lot


ISO-standarder

ISO 602:2015

Coal -- Determination of mineral matter


75 Petroleumsteknologi og beslektet teknologi


prEN 12081

Railway applications - Axleboxes - Lubricating greasesJernbane - Akselkasser - Smørefett


prEN 13075-1

Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 1: Bestemmelse av brytningsverdi for kationiske bitumenemulsjoner med mineralfillermetoden


prEN 13075-2

Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 2: Bestemmelse av blandetid med mineralfiller for kationiske bitumenemulsjoner


prEN 16849

Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance


prEN ISO 6976 rev

Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO/DIS 6976:2015)Naturgass - Beregning av brennverdier, tetthet, relativ tetthet og Wobbe indekser fra sammensetning (ISO/DIS 6976:2015)


prEN ISO 16530-1

Petroleum and natural gas industries - Well integrity - Part 1: Life cycle governance (ISO/DIS 16530-1:2015)




prEN ISO 18846

Solid biofuels - Determination of fines content in quantities of pellets (ISO/DIS 18846:2015)



ISO/DIS 6976

Natural gas -- Calculation of calorific values, density, relative density and Wobbe indices from composition


ISO/DIS 15380

Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPRSpråk: enKommentarfrist: 2015-06-26

ISO/DIS 15380

Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPRSpråk: enKommentarfrist: 2015-08-24

ISO/DIS 16486-4

Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: ValvesSpråk: enKommentarfrist: 2015-08-18

ISO/DIS 16530-1

Petroleum and natural gas industries -- Well integrity -- Part 1: Life cycle governance


ISO/DIS 18846

Solid biofuels -- Determination of fines content in quantities of pelletsSolid biobrensel -- Bestemmelse av finfraksjon innhold i mengde pellets


ISO/DIS 19901-4

Petroleum and natural gas industries -- Specific requirements for offshore structures -- Part 4: Geotechnical and foundation design considerationsSpråk: enKommentarfrist: 2015-06-14

ISO-standarder

ISO 17786:2015

Dimethyl ether (DME) for fuels -- Determination of high temperature (105°C) evaporation residues -- Mass analysis method

Språk: en

ISO/TR 17177:2015

Petroleum and natural gas industries -- Guidelines for the marine interfaces of hybrid LNG terminals

Språk: en



ISO/TS 15926-11:2015

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 11: Methodology for simplified industrial usage of reference dataSpråk: en


CEN ISO/TR 13624-2:2013

Petroleum and natural gas industries - Drilling and production equipment - Part 2: Deepwater drilling riser methodologies, operations, and integrity technical report (ISO/TR 13624-2:2009)Språk: en

CEN ISO/TR 19905-2:2013

Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 2: Jack-ups commentary and detailed sample calculation (ISO/TR 19905-2:2012)Språk: en

CEN ISO/TS 12747:2013

Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011)Språk: en

CEN/TR 15149-3:2014

Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method

Språk: en

CEN/TR 15367-1:2014

Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuelsPetroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel

Språk: en

CEN/TR 15745:2015

Liquid petroleum products - Determination of hydrocarbon types and oxygenates via multidimensional gas chromatography method - Round Robin research report

Flytende petroleumsprodukter – Bestemmelse av hydrokarbontyper og oksygenater via multidimensjonal gasskromatografimetode – Ringtest forskningsrapport

Språk: en

CEN/TR 16514:2013

Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol

Drivstoff – Blyfri bensin som inneholder mer enn 3,7 % (m/m) oksygen – Roadmap, prøvingsmetoder og krav for E10+ bensin

Språk: en

CEN/TR 16557:2013

Automotive fuels - High FAME diesel fuel blends (B11 - B30) - Background to the parameters required and their respective limits and determinationSpråk: en

CEN/TR 16569:2013

Automotive fuels - Assessing the effects of E10 petrol on vehicle emissions and performanceDrivstoff - Fastsettelse av effekt av E10 bensin på kjøretøyets utslipp og yteevne

Språk: en

CEN/TR 16680:2014

Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors

Flytende petroliumsprodukter - Undersøkelse av indre dieselinnsprøytning mekanismer for fastsittende avleiringer og påvirkningene på korrosjonshemmere

Språk: en



CEN/TS 16214-2:2014

Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 2: Conformity assessment including chain of custody and mass balance

Bærekraftig fremstilt biomasse til energianvendelser – Prinsipper, kriterier, indikatorer og påvisere for for biodrivstoff og biovæsker (bioliquids) – Del 2: Samsvarsvurdering inkludert overvåkingsskjede og massebalanse

Språk: en


NS-EN 16136:2015

Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method

Drivstoff - Bestemmelse av innhold av mangan og jern i blyfri bensin - Optisk emisjonsspektrometri med induktivt koblet plasma (ICP OES)

Språk: en

NS-EN ISO 10439-1:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 1: Generelle krav (ISO 10439-1:2015)

Språk: en

NS-EN ISO 10439-2:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 2: Non-integrally geared centrifugal and axial compressors (ISO 10439-2:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 2: Ikke-integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-2:2015)

Språk: en

NS-EN ISO 10439-3:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 3: Integrert drevne sentrifugal- og aksialkompressorer (ISO 10439-3:2015)

Språk: en

NS-EN ISO 10439-4:2015

Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015)

Petroleumsindustri, petrokjemisk industri og naturgassindustri - Aksial- og sentrifugalkompressorer og ekspansjonskompressorer - Del 4: Ekspansjonskompressorer (ISO 10439-4:2015)

Språk: en

NS-EN ISO 10628-1:2015


Språk: en

NS-EN ISO 16995:2015

Solid biofuels - Determination of the water soluble chloride, sodium and potassium content (ISO 16995:2015)Fast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold (ISO 16995:2015)

Språk: en




NS-EN 15105:2011

Solid biofuels - Determination of the water soluble chloride, sodium and potassium contentFast biobrensel - Bestemmelse av vannløselig klor-, natrium- og kaliuminnhold


NS-EN 16136:2011

Automotive fuels - Determination of manganese content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method

Drivstoff - Bestemmelse av manganinnhold i blyfri bensin - Optisk emisjonsspektrometri med induktivt koblet plasma (ICP-OES)


NS-EN ISO 10439:2002

Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)Petroleumindustri, kjemisk industri og gassindustri - Sentrifugalkompressorer (ISO 10439:2000)


77 Metallurgi


prEN 10056-1 rev

Structural steel equal and unequal leg angles - Part 1: DimensionsStrukturelle stål like og ulike beinvinkler - Del 1: Mål


prEN 16828

Hot rolled steel channels, I and H sections - Dimensions and massesVarmvalsede stålkanaler, I og H-profiler - Dimensjoner og masser


prEN ISO 4545-1

Metallic materials - Knoop hardness test - Part 1: Test method (ISO/DIS 4545-1:2015)Metalliske materialer - Knoop hardhetsprøving - Del 1: Prøvingsmetode (ISO/DIS 4545-1: 2015)


prEN ISO 4545-2

Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 4545-2:2015)Metalliske materialer - Knoop hardhetsprøving - Del 2: Verifikasjon og kalibrering av prøvingsmaskiner (ISO/DIS 4545-2: 2015)


prEN ISO 4545-3

Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO/DIS 4545-3:2015)Metalliske materialer - Knoop hardhetsprøving - Del 3: Kalibrering av referanseblokker (ISO/DIS 4545-3: 2015)



77 Metallurgi

prEN ISO 4545-4

Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO/DIS 4545-4:2015)Metalliske materialer - Knoop hardhetsprøving - Del 4: Tabell over hardhetverdier (ISO/DIS 4545-4: 2015)


prEN ISO 8049

Ferronickel shot - Sampling for analysis (ISO/DIS 8049:2015)Ferronikkel-kuler - Uttak av prøver for analyse (ISO/DIS 8049:2015)


prEN ISO 14577-4

Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO/DIS 14577-4:2015)

Metalliske materialer - Instrumentert inntrykningsprøving for hardhet og materialparametre - Del 4: Prøvingsmetode for metalliske og ikke-metalliske belegg (ISO/DIS 14577-4:2015)



ISO/DIS 4545-1

Metallic materials -- Knoop hardness test -- Part 1: Test method


ISO/DIS 4545-2

Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines


ISO/DIS 4545-3

Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks


ISO/DIS 4545-4

Metallic materials -- Knoop hardness test -- Part 4: Tables of hardness values


ISO/DIS 14577-4

Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatingsSpråk: enKommentarfrist: 2015-07-16

ISO/DIS 18203.2

Steel -- Determination of the thickness of surface-hardened layersStål - Bestemmelse av tykkelsen av overflateherdet sjikt


ISO/DIS 22034-2

Steel wire and wire products -- Part 2: Tolerances on wire dimensions



77 Metallurgi

ISO-standarder

ISO 6892-3:2015

Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature


ISO 14317:2015

Sintered metal materials excluding hardmetals -- Determination of compressive yield strength


ISO 17224:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substancesSpråk: en

ISO 17245:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditionsSpråk: en

ISO 17248:2015

Corrosion of metals and alloys -- Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solidsSpråk: en


CEN/TR 10317:2014

European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS)Språk: en

CEN/TR 10362:2014

Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric methodSpråk: en

CEN/TR 16748:2014

Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting

Språk: en

CEN/TR 16749:2014

Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast ProductsSpråk: en

CEN/TS 13714:2013

Characterization of sludges - Sludge management in relation to use or disposalKarakterisering av slam - Disponering av slam

Språk: en

CEN/TS 15656:2015

Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method

Språk: en


77 Metallurgi


NS-EN 1371-2:2015

Founding - Liquid penetrant testing - Part 2: Investment castingsStøperiteknikk - Penetrantprøving - Del 2: Støpestykker

Språk: en

NS-EN 1559-4:2015

Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castingsStøperiteknikk - Tekniske leveringsbetingelser - Del 4: Tilleggskrav for støpelegeringer av aluminium

Språk: en

NS-EN 10293:2015

Steel castings - Steel castings for general engineering usesStøpestål - Støpestål for vanlige konstruksjonsformål

Språk: en

NS-EN ISO 7441:2015

Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015)

Korrosjon av metaller og legeringer - Bestemmelse av bimetallisk korrosjon ved korrosjonsprøving under utendørs eksponering (ISO 7441:2015)

Språk: en


NS-EN 1371-2:1998

Founding - Liquid penetrant inspection - Part 2: Investment castings


NS-EN 1559-4:1999

Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castingsStøperiteknikk - Tekniske leveringsbetingelser - Del 4: Tilleggskrav for støpelegeringer av aluminium


NS-EN 10293:2005

Steel castings for general engineering usesStøpestål til vanlige konstruksjonsformål


NS-EN 10293:2005/AC:2008

Corrigendum AC - Steel castings for general engineering usesRettelsesblad AC - Støpestål til vanlige konstruksjonsformål


NS-EN ISO 7441:1995

Corrosion of metals and alloys - Determination of bimetallic corrosion in outdoor exposure corrosion tests (ISO 7441:1984)

Korrosjon av metaller og legeringer - Bestemmelse av bimetallisk korrosjon ved korrosjonsprøving under utendørs eksponering (ISO 7441:1984)



79 Treteknikk

79 Treteknikk


ISO/DIS 16893.2

Wood-based panels -- Particleboard


ISO/DIS 16895.2

Wood-based panels -- Dry-process fibreboard


ISO-standarder

ISO 1215:2015

Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste -- Definitions and packagingSpråk: enErstatter A00008:20:005823


CEN/TR 12872:2014

Wood-based panels - Guidance on the use of load-bearing boards in floors, walls and roofsTrebaserte plater - Veiledning for bruk av bærende plater i gulv, vegger og tak

Språk: en

CEN/TR 16816:2015

End use performance of wood products - Utilisation and improvement of existing methods to estimate service life

Språk: en

CEN/TS 16368:2014

Lightweight Particleboards - SpecificationsLette sponplater - Krav

Språk: en

CEN/TS 16526:2013

Sandwich boards for furniture (SWB-F) - Factory made products - Definition, classification and test methods for determination of performance characteristicsSpråk: en

81 Glassindustri og keramisk industri

ISO-standarder

ISO 3537:2015

Road vehicles -- Safety glazing materials -- Mechanical tests


ISO 18558:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for determining elastic modulus and bending strength of ceramic tube and ringsSpråk: en


81 Glassindustri og keramisk industri

ISO 22016:2015

Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods

Språk: en

83 Gummi- og plastindustri


prEN 204

Classification of thermoplastic wood adhesives for non-structural applicationsKlassifisering av termoplastiske trelim for ikke-bærende konstruksjoner


prEN 205

Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap jointsLim - Trelim for ikke-bærende konstruksjoner - Bestemmelse av skjærstyrke ved strekkprøving av omleggsskjøter


prEN 302-8

Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shearSpråk: enKommentarfrist: 2015-08-23

prEN 12012-1

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shreddersMaskiner for plast- og gummibearbeiding - Størrelsesreduserende maskiner - Del 1: Sikkerhetskrav for skovlgranulatorer og kverner


prEN 12765

Classification of thermosetting wood adhesives for non-structural applicationsKlassifisering av herdende trelim for ikke-bærende konstruksjoner


prEN 15416-1

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glasshouse test)Språk: enKommentarfrist: 2015-08-23

prEN 15416-3

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 3: Creep deformation test at cyclic climate conditions with specimens loaded in bending shearSpråk: enKommentarfrist: 2015-08-23

prEN 15416-4

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditionsSpråk: enKommentarfrist: 2015-08-23



prEN 15416-5

Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditionsSpråk: enKommentarfrist: 2015-08-23

prEN 15425

Adhesives - One component polyurethane (PUR) for load-bearing timber structures - Classification and performance requirements



ISO/DIS 1304

Rubber compounding ingredients - Carbon black - Determination of iodine adsorption number - Titrimetric method [Revision of second edition (ISO 1304:1985)]

Ingredienser i gummiblandinger - Kjønrøk - Bestemmelse av adsorpsjonstall for jod - Titreringsmetode


ISO/DIS 4586-1


ISO/DIS 4586-3

High-pressure decorative laminates (HPL, HPDL) -- Sheets based on thermosetting resins (Usually called Laminates) -- Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substratesSpråk: enKommentarfrist: 2015-05-26

ISO/DIS 8502-9

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

Forbehandling av stål før påføring av maling og beslektede produkter - Prøvinger for å vurdere overflaterenhet - Del 9: Feltmetode for bestemmelse av vannløslige salter ved konduktivitetsmåling


ISO/DIS 16486-4

Plastics piping systems for the supply of gaseous fuels -- Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing -- Part 4: ValvesSpråk: enKommentarfrist: 2015-08-18

ISO-standarder

ISO 899-1:2003/Amd 1:2015

Språk: en

ISO 899-2:2003/Amd 1:2015

Språk: en

ISO 3601-5:2015

Fluid power systems -- O-rings -- Part 5: Specification of elastomeric materials for industrial applications




ISO 6505:2015

Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals


ISO 13927:2015

Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector


ISO 15106-5:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 5: Pressure sensor method

Språk: en

ISO 15106-6:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 6: Atmospheric pressure ionization mass spectrometer methodSpråk: en

ISO 15106-7:2015

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 7: Calcium corrosion method

Språk: en

ISO 16012:2015

Plastics -- Determination of linear dimensions of test specimens

Språk: enErstatter A00008:20:028687,A00008:20:043553

ISO 16620-1:2015

Plastics -- Biobased content -- Part 1: General principles

Språk: en

ISO 16620-2:2015

Plastics -- Biobased content -- Part 2: Determination of biobased carbon content

Språk: en

ISO 16620-3:2015

Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content

Språk: en

ISO 18517:2015

Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide


ISO 19051:2015

Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content by Micro Dumas combustion method

Språk: en

ISO 23560:2015

Woven polypropylene sacks for bulk packaging of foodstuffs





CEN ISO/TR 22007-5:2014

Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011)Språk: en

CEN/TS 14578:2013

Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation

Rørledningssystemer av plast for vannforsyning og avløp - Glassfiberarmert herdeplast (GRP) basert på umettet polyesterharpiks (UP) - Installasjonsveiledning

Språk: en

CEN/TS 14999:2013

Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container

Språk: en

CEN/TS 16640:2014


Språk: en


NS-EN 59:1977

Glass reinforced plastics - Measurement of hardness by means of a Barcol impressorGlassfiberforsterket plast - Måling av hardhet ved hjelp av et Barcol-hardhetsprøvingsverktøy

Språk: en

NS-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for trykkrør av termoplast - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2015)

Språk: en

NS-EN ISO 16396-1:2015

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)

Plast - Støpe- og ekstruderingsmaterialer av polyamid (PA) - Del 1: Betegnelsessystem, merking av produkter og grunnlag for spesifikasjoner (ISO 16396-1:2015)

Språk: en

NS-EN ISO 28017:2011/A1:2015

Amendment A1 - Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications - Specification (ISO 28017:2011/Amd 1:2015)

Endringsblad A1 - Gummislanger og slangekoplinger forsterket med korder eller tekstiler til mudringsformål - Spesifikasjon (ISO 28017:2011/Amd 1:2015)

Språk: en


NS-EN ISO 1874-1:2010

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specification (ISO 1874-1:2010)

Plast - Støpe- og ekstruderingsmasser av polyamid (PA) - Del 1: Betegnelsessystem og spesifikasjonsgrunnlag (ISO 1874-1:2010)




NS-EN ISO 13845:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for rør av polyvinylklorid uten mykner (PVC-U) - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2000)


85 Papirteknikk

ISO-standarder

ISO 699:2015

Pulps -- Determination of alkali resistance


ISO 2144:2015

Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C


ISO 3260:2015

Pulps -- Determination of chlorine consumption (Degree of delignification)


ISO 5636-6:2015

Paper and board -- Determination of air permeance (medium range) -- Part 6: Oken method

Språk: en


NS-EN ISO 12625-9:2015

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)Mykpapir og mykpapirprodukter - Del 9: Bestemmelse av bruddstyrke ved ballmetode (ISO 12625-9:2015)

Språk: en

NS-EN ISO 12625-15:2015

Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2015)

Mykpapir og mykpapirprodukter - Del 15: Bestemmelse av optiske egenskaper - Måling av lysstyrke og farger med lystype C/2° (innendørs dagslys) (ISO 12625-15:2015)

Språk: en

NS-EN ISO 12625-16:2015

Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)

Mykpapir og mykpapirprodukter - Del 16: Bestemmelse av optiske egenskaper - Opasitet - Diffus reflektansmetode (ISO 12625-16:2015)

Språk: en


85 Papirteknikk


NS-EN ISO 12625-9:2005

Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2005)Mykpapir og mykpapirprodukter - Del 9: Bestemmelse av bruddstyrke (ISO 12625-9:2005)


87 Maling- og lakkindustri


ISO/DIS 12632

Graphic technology -- Ink, paper and labels -- Requirements on hot alkali penetration and resistance


ISO/DIS 19399

Paints and varnishes -- Wedge-cut method for determination of film thickness (scribe and drill method)



CEN/TS 16498:2013

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin stainingMaling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Vurdering av garvesyre misfarging

Språk: en

CEN/TS 16499:2013

Paints and varnishes - Coating materials and coating systems for exterior wood - Resistance to blocking of paints and varnishes on wood

Maling og lakk - Beleggmaterialer og beleggsystemer for utvendig treverk - Motstand mot klumping av maling og lakk på treverk

Språk: en

CEN/TS 16700:2014

Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrateSpråk: en

CEN/TS 16766:2015

Bio-based solvents - Requirements and test methods

Språk: en


NS-EN 16623:2015

Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking

Maling og lakk - Reaktive belegg for brannbeskyttelse av metalliske underlag - Definisjoner, krav, egenskaper og merking

Språk: en


90

90


NS-EN 1253-1:2015

Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mmSluk i bygninger - Del 1: Gulvsluk med vannlås med en dybde på minst 50 mm

Språk: en


NS-EN 1253-1:2003

Gullies for buildings - Part 1: RequirementsSluk i bygninger - Del 1: Krav

Språk: noIngen erstatning

91 Bygningsmaterialer og bygging


prEN 13075-1

Bitumen and bituminous binders - Determination of breaking behaviour - Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 1: Bestemmelse av brytningsverdi for kationiske bitumenemulsjoner med mineralfillermetoden


prEN 13075-2

Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bituminous emulsions

Bitumen og bituminøse bindemidler - Bestemmelse av brytningsegenskaper - Del 2: Bestemmelse av blandetid med mineralfiller for kationiske bitumenemulsjoner


prEN 13203-4

Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity

Gassfyrte husholdningsapparater som produserer varmt vann - Del 4: Vurdering av energiforbruk av gassfyrte varmeapparater (MCHP) som produserer varmt vann og elektrisitet


prEN 15316-4-10

Heating systems and water based cooling systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-10: Wind power generation systems

Varmesystemer og vannbaserte kjølesystemer i bygninger - Metode for beregning av systemets energikrav og systemvirkningsgrader - Del 4-10: Systemer for vindkraftgeneratorer


prEN 16382

Thermal insulation products for building applications - Determination of the pull-through resistance of plate anchors through thermal insulation productsSpråk: enKommentarfrist: 2015-08-16



prEN 16383

Thermal insulation products for buildings applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)Språk: enKommentarfrist: 2015-08-16

prEN 16798-5-2

Energy performance of buildings - Modules M5-6, M5-8 - Ventilation for buildings - Calculation methods for energy requirements of ventilation systems - Part 5-2: Distribution and generation (revision of EN 15241) - method 2Språk: enKommentarfrist: 2015-07-19

prEN 16798-5-1

Energy performance of buildings - Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8 - Ventilation for buildings - Calculation methods for energy requirements of ventilation and air conditioning systems - Part 5-1: Distribution and generation (revision of EN 15241) - Method 1Språk: enKommentarfrist: 2015-08-31

prEN 16798-11

Energy performance of buildings - Module M4-3 - Calculation of the design cooling load


prEN 16830

Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function

Sikkerhets- og kontrollutstyr til brennere og benngassapparater eller flytende brensel - Kontrollfunksjoner i elektroniske systemer - Temperaturkontrollfunksjon


prEN 16849

Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance


prEN 16854

Thermal insulation products for building equipment and industrial installations - Determination of soot fire resistance of thermal insulation products for the use in chimneysSpråk: enKommentarfrist: 2015-08-09

prEN 16867

Building hardware - Mechatronic door furniture - Requirements and test methods


prEN ISO 10211

Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO/DIS 10211:2015)Kuldebroer i bygningskonstruksjoner - Varmestrømmer og overflatetemperaturer - Detaljerte beregninger


prEN ISO 13370

Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO/DIS 13370:2015)Bygningers termiske egenskaper - Varmeoverføring via grunnen - Beregningsmetoder (ISO/DIS 13370:2015)




prEN ISO 13786

Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO/DIS 13786:2015)Bygningskomponenters termiske egenskaper - Dynamiske termiske egenskaper - Beregningsmetoder (ISO/DIS 13786:2015)


prEN ISO 13789

Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO/DIS 13789:2015)

Bygningers termiske egenskaper - Varmetapskoeffisient på grunn av varmegjennomgang og ventilasjon - Beregningsmetode (ISO/DIS 13789:2015)


prEN ISO 14683

Thermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values (ISO/DIS 14683:2015)

Kuldebroer i bygningskonstruksjoner - Lineær varmegjennomgangskoeffisient - Forenklede beregningsmetoder og normalverdier (ISO/DIS 14683:2015)



ISO/DIS 6946

Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation methodBygningskomponenter og -elementer - Varmemotstand og varmegjennomgangskoeffisient - Beregningsmetode


ISO/DIS 6946

Building components and building elements -- Thermal resistance and thermal transmittance -- Calculation method


ISO/DIS 10211

Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculationsKuldebroer i bygningskonstruksjoner - Varmestrømmer og overflatetemperaturer - Detaljerte beregninger


ISO/DIS 10211

Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations


ISO/DIS 13370

Thermal performance of buildings -- Heat transfer via the ground -- Calculation methodsBygningers termiske egenskaper - Varmeoverføring via grunnen - Beregningsmetoder


ISO/DIS 13370

Thermal performance of buildings -- Heat transfer via the ground -- Calculation methods




ISO/DIS 13786


ISO/DIS 13786

Thermal performance of building components -- Dynamic thermal characteristics -- Calculation methods


ISO/DIS 13789

Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation methodBygningers termiske egenskaper - Varmetapskoeffisienter på grunn av varmegjennomgang og ventilasjon - Beregningsmetode


ISO/DIS 13789

Thermal performance of buildings -- Transmission and ventilation heat transfer coefficients -- Calculation method


ISO/DIS 14683

Thermal bridges - Calculation of heat flows and surface temperatures - Simplified methods and generally accepted design values


ISO/DIS 14683

Thermal bridges in building construction -- Linear thermal transmittance -- Simplified methods and default values


ISO/DIS 16890-3

Air filters for general ventilation -- Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust capturedSpråk: enKommentarfrist: 2015-08-07

ISO/DIS 16890-4

Air filters for general ventilation -- Part 4: Conditioning method to determine the minimum fractional test efficiency


ISO/DIS 18324

Timber structures -- Test methods -- Floor vibration performance


ISO/DIS 52017-1

Energy performance of buildings -- Calculation of the dynamic thermal balance in a building or building zone -- Part 1: Generic calculation procedureSpråk: enKommentarfrist: 2015-06-21


CEN/TR 81-12:2014

Safety rules for the construction and installation of lifts - Basics and interpretations - Part 12: Use of EN 81-20 and EN 81-50 in specific marketsSpråk: en



CEN/TR 1749:2014

European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)

Språk: en

CEN/TR 13737-2:2014

Gas infrastructure - Implementation Guide for Functional Standards prepared by CEN/TC 234 - Part 2: National Pages related to CEN/TC 234 standardsSpråk: en

CEN/TR 13801:2014

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installationSpråk: en

CEN/TR 14245:2014

Cement - Guidelines for the application of EN 197-2 Conformity Evaluation

Språk: en

CEN/TR 16496:2013

Construction Products - Assessment of release of dangerous substances - Use of harmonised horizontal assessment methods

Språk: en

CEN/TR 16563:2013

Principles of the equivalent durability procedure

Språk: en

CEN/TR 16625:2013

Flexible sheets for waterproofing - Statistical definition of manufacturer's limiting value and declared value (MLV and MDV) - 95 % StatisticSpråk: en

CEN/TR 16632:2014

Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and RecommendationsSpråk: en

CEN/TR 16639:2014

Use of k-value concept, equivalent concrete performance concept and equivalent performance of combinations concept

Språk: en

CEN/TR 16676:2014

Energy losses by industrial door

Språk: en

CEN/TR 16787:2014

Industrial Gas Installation - Guideline

Språk: en

CEN/TS 115-4:2014

Safety of escalators and moving walks - Part 4: Interpretations related to EN 115 family of standards

Språk: en

CEN/TS 1452-7:2014

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformitySpråk: en



CEN/TS 12201-7:2014

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 7: Guidance for the assessment of conformitySpråk: en

CEN/TS 14807:2013



Språk: en

CEN/TS 15548-1:2014

Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °CSpråk: en

CEN/TS 15963:2014

Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen

Bitumen og bituminøse bindemidler - Bestemmelse av bruddseighetstemperatur ved trepunkts bøyeprøving på prøve med innsnitt

Språk: en

CEN/TS 16459:2013

External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187

Språk: en

CEN/TS 16516:2013

Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor airByggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft

Språk: en

CEN/TS 16628:2014

Energy Performance of Buildings - Basic Principles for the set of EPB standards

Språk: en

CEN/TS 16629:2014

Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards

Språk: en

CEN/TS 16637-1:2014



Språk: en

CEN/TS 16637-2:2014


Språk: en


NS-EN 107:1980

Methods of testing windows - Mechanical testPrøvingsmetoder for vinduer - Mekanisk prøving

Språk: en



NS-EN 130:1984

Methods of testing doors - Test for the change in stiffness of the door leaves by repeated torsionPrøvingsmetoder for dører - Prøving av endring i dørbladenes stivhet ved gjentatt vridning

Språk: en

NS-EN 1253-1:2015

Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mmSluk i bygninger - Del 1: Gulvsluk med vannlås med en dybde på minst 50 mm

Språk: en

NS-EN 1253-2:2015

Gullies for buildings - Part 2: Roof drains and floor gullies without trapSluk i bygninger - Del 2: Takavløp og gulvsluk uten vannlås

Språk: en

NS-EN 1992-1-1:2004/A1:2014

Amendment A1 - Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildingsEndringsblad A1 - Eurokode 2: Prosjektering av betongkonstruksjoner - Del 1-1: Allmenne regler og regler for bygninger

Språk: en

NS-EN 13120:2009+A1:2014/AC:2015

Corrigendum AC - Internal blinds - Performance requirements including safetyRettelsesblad AC - Innvendige persienner - Krav til ytelse og sikkerhet

Språk: en

NS-EN 13165:2012+A1:2015

Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av stivt polyuretanskum (PU) - Krav

Språk: en

NS-EN 13166:2012+A1:2015

Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av fenolskum (PF) - Krav

Språk: en

NS-EN 13167:2012+A1:2015

Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av celleglass (CG) - Krav

Språk: en

NS-EN 13168:2012+A1:2015

Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av treull (WW) - Krav

Språk: en

NS-EN 13169:2012+A1:2015

Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert perlitt (EPB) - Krav

Språk: en

NS-EN 13170:2012+A1:2015

Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert kork (ICB) - Krav

Språk: en

NS-EN 13171:2012+A1:2015

Thermal insulation products for buildings - Factory made wood fibre (WF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av trefiber (WF) - Krav

Språk: en



NS-EN 14471:2013+A1:2015

Chimneys - System chimneys with plastic flue liners - Requirements and test methodsSkorsteiner - Systemskorsteiner med innvendige røykkanaler av plast - Krav og prøvingsmetoder

Språk: en

NS-EN 15059:2009+A1:2015

Snow grooming equipment - Safety requirementsLøypemaskiner - Sikkerhetskrav

Språk: en

NS-EN 16012:2012+A1:2015

Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performanceVarmeisolasjon i bygninger - Reflekterende isolasjonsprodukter - Bestemmelse av deklarert termisk ytelse

Språk: en

NS-EN 16069:2012+A1:2015

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av polyetylenskum (PEF) - Krav

Språk: en

NS-EN 16497-1:2015

Chimneys - Concrete System Chimneys - Part 1: Non-balanced flue applicationsSkorsteiner - Systemskorsteiner av betong - Del 1: Ikke-balanserte røykavtrekk

Språk: en

NS-EN ISO 13845:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2015)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for trykkrør av termoplast - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2015)

Språk: en


NS-EN 1253-2:2003

Gullies for buildings - Part 2: Test methodsSluk i bygninger - Del 2: Prøvingsmetoder


NS-EN 1253-1:2003

Gullies for buildings - Part 1: RequirementsSluk i bygninger - Del 1: Krav

Språk: noIngen erstatning

NS-EN 13165:2012

Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av stivt polyuretanskum (PU) - Krav


NS-EN 13166:2012

Thermal insulation products for buildings - Factory made phenolic foam (PF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av fenolskum (PF) - Krav




NS-EN 13167:2012

Thermal insulation products for buildings - Factory made cellular glass (CG) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av celleglass (CG) - Krav


NS-EN 13168:2012

Thermal insulation products for buildings - Factory made wood wool (WW) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av treull (WW) - Krav


NS-EN 13169:2012

Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert perlitt (EPB) - Krav


NS-EN 13170:2012

Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av ekspandert kork (ICB) - Krav


NS-EN 13171:2012

Thermal insulation products for buildings - Factory made wood fibre (WF) products - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av trefiber (WF) - Krav


NS-EN 14471:2013

Chimneys - System chimneys with plastic flue liners - Requirements and test methodsSkorsteiner - Systemskorsteiner med innvendige røykkanaler av plast - Krav og prøvingsmetoder


NS-EN 15059:2009

Snow grooming equipment - Safety requirementsLøypemaskiner - Sikkerhetskrav


NS-EN 16012:2012

Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performanceVarmeisolasjon i bygninger - Reflekterende isolasjonsprodukter - Bestemmelse av deklarert termisk ytelse


NS-EN 16069:2012

Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - SpecificationVarmeisolasjonsprodukter for bygninger - Fabrikkframstilte produkter av polyetylenskum (PEF) - Krav




NS-EN ISO 13845:2000

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection (ISO 13845:2000)

Rørledninger av plast - Muffeforbindelser med elastomerisk tetningsring til bruk for rør av polyvinylklorid uten mykner (PVC-U) - Prøvingsmetode for tetthet under innvendig trykk og avbøyning (ISO 13845:2000)


93 Anleggsvirksomhet


EN 13674-1:2011/prA1

Railway applications - Track - Rail - Part 1: Vignole railway rails 46 kg/m and aboveJernbane - Spor - Skinner - Del 1: Vignolskinner fra 46 kg/m


prEN 12675

Traffic signal controllers - Functional safety requirementsStyreapparater for trafikklyssignaler - Krav til funksjonssikkerhet


prEN 12697-13

Bituminous mixtures - Test methods - Part 13: Temperature measurement


prEN 13146-10

Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance


prEN 14504

Inland navigation vessels - Floating landing stages and floating bridges on inland waters - Requirements, testsInnlandsnavigasjonsfartøy - Flytende landingstadier og flytende broer på innlandsvann - Krav, prøvinger


prEN 16432-1

Railway applications - Ballastless track systems - Part 1: General requirements


prEN 16432-1

Railway applications - Ballastless track systems - Part 1: General requirements


prEN 16432-2

Railway applications - Ballastless track systems - Part 2: Subsystems and components




prEN 16840



prEN 16843

Railway applications - Infrastructure - Mechanical requirements for joints in running rails



CEN/TR 13201-1:2014

Road lighting - Part 1: Guidelines on selection of lighting classes

Språk: en

CEN/TR 16513:2014

Railway applications - Track - Survey of track geometry quality

Språk: en

CEN/TR 16626:2014

Vitrified clay pipe systems for drains and sewers - Guidance for voluntary third-party certification procedures

Språk: en

CEN/TS 12633:2014

Method of polishing specimens prior to the measurement of slip and skid resistanceMetode for polering av prøvelegemer forut for måling av skli- og gli-motstand

Språk: en

CEN/TS 13286-54:2014

Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixturesSpråk: en

CEN/TS 13714:2013

Characterization of sludges - Sludge management in relation to use or disposalKarakterisering av slam - Disponering av slam

Språk: en

CEN/TS 14807:2013



Språk: en

CEN/TS 15901-15:2014

Road and airfield surface characteristics - Part 15: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCI): The IMAGSpråk: en

CEN/TS 16272-5:2014

Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 5: Intrinsic characteristics - In situ values of sound reflection under direct sound field conditions

Jernbane - Spor - Støybarrierer og relaterte innretninger som reagerer på luftbåren lydspredning - Test metode for å bestemme akustisk ytelse - Del 5: Indre egenskaper - På stedet verdier av lydrefleksjon under direkte lydfeltsforhold

Språk: en



97 Utstyr til husholdningsbruk og industriell bruk. Underholdning. Sport


prEN 71-12

Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substancesSikkerhet for leketøy - Del 12: N-nitrosaminer og N-nitrosamindannende stoffer


prEN 1272

Child care articles - Table mounted chairs - Safety requirements and test methodsSped- og småbarnsprodukter - Barnestoler til å henge på bord - Sikkerhetskrav og prøvingsmetoder


prEN 12503-2

Sports mats - Part 2: Pole vault and high jump mats, safety requirementsSportmatter - Del 2: Stavsprang- og høydehoppmatter, sikkerhetskrav


prEN 12503-4

Sports mats - Part 4: Determination of shock absorptionSportsmatter - Del 4: Bestemmelse av støtdemping


prEN 12868 rev

Child use and care articles - Methods for determining the release of N-Nitrosamines and N-Nitrosatable substances from elastomer or rubber teats and soothers

Spedbarns- og småbarnsprodukter - Metoder for å bestemme N-nitrosaminer og N-nitrosamindannende stoffer som avgis fra flaskesmokker og narresmokker av gummi eller andre elastomerer


prEN 14903

Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Determination of rotational frictionIdrettsdekker - Utendørs idrettsdekker av kunststoff - Bestemmelse av friksjon ved vridning


prEN 16830

Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Temperature Control function

Sikkerhets- og kontrollutstyr til brennere og benngassapparater eller flytende brensel - Kontrollfunksjoner i elektroniske systemer - Temperaturkontrollfunksjon


prEN 16838:2015

Refrigerated display scooping cabinets for gelato - Classification, requirements and test conditionsKjøle-skap og rom for fremvisning av kule is - Klassifikasjon, krav og test betingelser




prEN 16853

Conservation of cultural heritage - Conservation process - Decision making, planning and implementation


prEN 16855

Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 1: Prefabricated cold room kits



ISO/DIS 9221-1

Furniture -- Children's high chairs -- Part 1: Safety requirements


ISO/DIS 9221-2

Furniture -- Children's high chairs -- Part 2: Test methods


ISO/DIS 24496

Office furniture -- Office chairs -- Methods for the determination of dimensions



CEN/TR 15071:2014

Safety of toys - National translations of warnings and instructions for use in EN 71 series

Språk: en

CEN/TR 15371:2014

Safety of toys - Replies to requests for interpretation of EN 71-1, EN 71-2 and EN 71-8

Språk: en

CEN/TR 16411:2014

Child use and care articles - 2013 compiled interpretations of CEN/TC 252 standards

Språk: en

CEN/TR 16467:2013

Playground equipment accessible for all childrenLekeplassutstyr tilgjengelig for alle barn

Språk: en

CEN/TR 16512:2015

Child use and care articles - Guidelines for the safety of children’s slings

Språk: en

CEN/TR 16598:2014

Collection of rationales for EN 1176 - RequirementsInnsamling av begrunnelser for EN 1176 - Krav

Språk: en

CEN/TR 16792:2014

Safety of children's clothing - Recommendations for the design and manufacture of children's clothing - Mechanical safety

Språk: en



CEN/TS 16163:2014

Conservation of Cultural Heritage - Guidelines and procedures for choosing appropriate lighting for indoor exhibitionsBevaring av kulturminner - Utstillingsbelysning av kulturminne

Språk: en

CEN/TS 16354:2013

Laminate floor coverings - Underlays - Specification, requirements and test methods

Språk: en

CEN/TS 16611:2014

Furniture - Assessment of the surface resistance to microscratching

Språk: en

CEN/TS 16665:2014

Standing ladder durability test specification

Språk: en

CEN/TS 16717:2015

Surface for sports areas - Method of test for the determination of shock absorption, vertical deformation and energy restitution using the advanced artificial athleteSpråk: en


NS-EN 14533:2015


Språk: en

NS-EN 16122:2012/AC:2015

Corrigendum AC - Domestic and non-domestic storage furniture - Test methods for the determination of strength, durability and stability

Rettelsesblad AC - Oppbevaringsmøbler til husholdningsbruk og ikke-husholdningsbruk - Prøvingsmetoder for bestemmelse av styrke, holdbarhet og stabilitet

Språk: en

NS-EN 50465:2015

European product standard for combined heating power systems using gas fuelEuropeisk produktstandard for gassfyrte kombinerte varmekraftsystemer

Språk: en


NS-EN 14533:2003



NS-EN 50465:2008

Gas appliances - Fuel cell gas heating appliances - Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW



Date post:	10-Jan-2020
Category:	Documents
Upload:	others
View:	6 times
Download:	0 times