Ordering Guide
1. 2. 3.
Default Option
Please specify if using a
different connector type.
7. 8.
6.4.
5.
CONNECTION OPTIONS
2400K 2700K 3000K
3500K 4000K 6000K
AVAILABLE COLOR TEMPERATURES
Connection Options
1 - End Feed Hard Wire Connection 5 - IP67 Connector Input
2 - Back Feed Hard Wire Through Channel 6 - Soldered Daisy-Chain
3 - Side Feed Hard Wire Connection 7 - Daisy Chain with IP20 Connectors
4 - IP20 Connector Input 8 - Daisy Chain with IP67 Connectors
Date
Notes
Project
Applications:
Commercial Hospitality ResidentialEntertainment Museums RetailHealthcare Public Spaces
Category CRI IP Rating Voltage Wattage Color Temperature
RBS2 90 24 6.0
RBS2 - RIBBONLYTE SERIES 2 90 - CRI 90 20 - IP 20 24 - 24 V 6.0 - 6.0 W/ft (19.7 W/m) 24 - 2400K 35 - 3500K
65 - IP 65 27 - 2700K 40 - 4000K
68 - IP 68 30 - 3000K 60 - 6000K
STATIC WHITE SERIES 2 RIBBONLYTE 6.0
GENLED Acolyte®’s Series 2 RibbonLyte product line provides a 40% or more increase of lumens per watt, lumens per foot, and LEDs per foot. Also, RibbonLyte now has tighter LED spacing and shorter cuttable lengths.
· 6.0 W/ft (19.7 W/m)· Create a custom fixture with our channels· 6 white color temperatures· 90+ CRI· 2-Step MacAdam’s ellipse binning
Page 1GENLED Acolyte® is a quality division of GENLED Brands™ | www.GENLEDBrands.com/Home/Acolyte | GENLED Acolyte® | Architectural Lighting Solutions
STATIC WHITE SERIES 2 RIBBONLYTE 6.0
Page 2GENLED Acolyte® is a quality division of GENLED Brands™ | www.GENLEDBrands.com/Home/Acolyte | GENLED Acolyte® | Architectural Lighting Solutions
STATIC WHITE SERIES 2 RIBBONLYTE 6.0
Operating Voltage 24 V
Power Consumption 6.0 W/ft (19.7 W/m)
Current (mA) - 24V 250 mA/ft (820 mA/m)
LED Pitch 68 LEDs/ft (224 LEDs/m)
Protection Rating IP20, IP65, IP68
Dimming/Control MLV / 0-10 Volt / DMX / Lutron A-Series 1% dimming LED drivers / DALI
Operating Temperature -40° F to 158° F (-40° C to 70° C)
Colors Temperatures 2400K 2700K 3000K 3500K 4000K 6000K
MacAdam’s Ellipses (SDCM) 2-Step Binning
Lumens660 lm/ft
(2165 lm/m)732 lm/ft
(2401 lm/m)792 lm/ft
(2598 lm/m)792 lm/ft
(2598 lm/m)780 lm/ft
(2558 lm/m)768 lm/ft
(2519 lm/m)
Binning Tolerance +/- 100K
LED Beam Angle 120°
Lamp Life 50,000 Hrs
Cuttable Length 1.41 in (35.70 mm)
CRI - All Color Temp. 90+ CRI
Lumens/Watt 110 lm/W 122 lm/W 132 lm/W 132 lm/W 130 lm/W 128 lm/W
Constant Voltage
Certifications CE, ETL, RoHS
Warranty IP20: 6 years, IP65/68: 3 years
SPECIFICATIONS / DIAGRAM / USAGE GUIDELINES
· When installing this product take into account the surface temperature of the material this product is mounted to. Many building surfaces which are exposed to direct sunlight exceed the 70° C / 158° F maximum that our product is rated for. High risk locations like this should be avoided.· Our IP65 can be used in wet, outdoor locations around swimming pools and spa tubs, but our products are not intended to be submerged in pools and fountains and do not carry UL676 certification to do so.
· Please refer to our RibbonLyte Proper Use Guide in our Application Guide for more information. Available for download at www.GENLEDBrands.com/Home/Acolyte· Compatible with a wide variety of control products including the entire line of Lutron dimming systems.
· For use with GENLED Acolyte® drivers, 0-10V dimming modules and interface controllers (DMXINF models).
· Use with non-GENLED Acolyte® supplied triac, MLV or ELV drivers is not supported or warrantied.· Due to the nature of the product, RibbonLyte cuttable lengths are generally longer or shorter than the customer requested length. · Unless specified, RibbonLyte is factory cut at the shorter cuttable point.· We reserve the right to make changes to product lineup, specifications, design and finishes at any time without notice.
USAGE GUIDELINES:
GENLED Acolyte® does not warrant or represent that the information is free from errors or omission. The information may change without notice and GENLED Acolyte® is not in any way liable for the accuracy of any information printed and stored or in any way interpreted or used.
24V DIMENSIONS Top View Side View Dimensions
IP2
0
CUTTABLE EVERY: 1.41 in (35.70 mm)
Width 0.39 in (10 mm)
Max Length* 30 ft (9.14 m)
Height 0.09 in (2.29 mm)
IP6
5
CUTTABLE EVERY: 1.41 in (35.70 mm)
Width 0.39 in (10 mm)
Max Length* 30 ft (9.14 m)
Height 0.125 in (3.18 mm)
IP6
8
CUTTABLE EVERY: 1.41 in (35.70 mm)
Width 0.52 in (13.21 mm)
Max Length* 30 ft (9.14 m)
Height 0.19 in (4.80 mm)
*Max length before additional power is introducedMaximum run length for IP68 waterproof ribbonlyte is 9.14m (30 ft). For single runs longer than 9.14m, ribbonlyte will be daisy chained.
Page 3GENLED Acolyte® is a quality division of GENLED Brands™ | www.GENLEDBrands.com/Home/Acolyte | GENLED Acolyte® | Architectural Lighting Solutions
STATIC WHITE SERIES 2 RIBBONLYTE 6.0
CHANNEL COMPATIBILITY / CHANNEL OPTIONS
IP20/IP65 IP68
AC1
AC2
AC3
AC4
AC5
AP1
AR1
AR2
AR3
AS1
AS2
AS3
AS6
AS20G
AT4
AT5
AT11
AW35
B1
C22
GL1
GL2
ROUND
W31
WH35
SURFACE MOUNTED CHANNELS
LENS OPTIONS: C - Clear F - Frosted M - Milky G Grazer
AC1C, F, M
AC2C, F, M
AC3C, F, M
AC4C, F, M
AC5C, F, M
AP1C, F, M
AS1C, F, M
AS2C, F, M
AS3C, F, M
AS6C, F, M
AS20GG
AT4C, F, M
AT5C, F, M
AT11C, F, M
AW35C, F, M
B1C, F, M
C22C, F, M
GL2C, F, M
ROUNDC, F, M
WH35C, F, M
RECESSED CHANNELS
LENS OPTIONS: C - Clear F - Frosted M - Milky
AR1C, F, M
AR2C, F, M
AR3C, F, M
W31C, F, M
GL1C, F, M
When installing this product take into account the surface temperature of the material this product is mounted to. Many building surfaces which are exposed to direct sunlight exceed the 70°C/158°F maximum that our product is rated for. High risk locations like this should be avoided.
Our IP68 product is not intended to be submerged in pools and fountains and does not carry UL 676 certification to do so.
DISCLAIMER
Page 4GENLED Acolyte® is a quality division of GENLED Brands™ | www.GENLEDBrands.com/Home/Acolyte | GENLED Acolyte® | Architectural Lighting Solutions
STATIC WHITE SERIES 2 RIBBONLYTE 6.0
WIRING DIAGRAMSWIRING DIAGRAMS
MAGNETIC + ELV
0-10V
AC Driver
L
Red+
Red+
0-10Purple
+
-GreyN
Black-
LED
Dimmer
WIRE COLORS PER
RIBBONLYTE COLOR
STATIC WHITE + STATIC COLOR SERIES 2
Red Wire (+) Positive
Black Wire (-) Negative
L
AC
MagneticDriver
Red+
-Black
LED
L
N
Dimmer
REV.22FEB2019
DMX
DMX in DMX
Interface/Decoder
Driver AC
LED
LRed
+
See wire colorsat the right.
+
N-Black
-