+ All Categories
Home > Documents > steam turbine

steam turbine

Date post: 15-Nov-2014
Category:
Upload: toor05142
View: 62 times
Download: 3 times
Share this document with a friend
Popular Tags:
14
LAB SESSION NO. 2 Study of Steam Turbine Rotodynamic Machines All rotodynamic machines have a rotating component through which the fluid passes. In a turbine this is called the rotor which has a number of vanes or blades. The fluid passes through the blades and drives the rotor round transferring tangential momentum to the rotor. In a pump the tangential motion of the rotor as it rotates results in an increase in the tangential momentum of the fluid. This increase in kinetic energy is converted to pressure by decelerating the fluid in the discharge route from the pump. In a turbine the fluid passes over /through the impeller and loses energy (momentum and pressure) the energy being transferred to the rotor. Rotodynamic machines are smooth and continuous in action with a consequent pulsation free flow from pumps and smooth rotation from turbines. In the event of pump discharge flow being suddenly stopped there are no high shock loads. Positive displacement machines can easily be damaged if a discharge valve is suddenly closed. Rotodynamic pumps are ideal for high flow low discharge head duties and provide compact reliable solutions.
Transcript
Page 1: steam turbine

LAB SESSION NO. 2

Study of Steam Turbine

Rotodynamic Machines

All rotodynamic machines have a rotating component through which the fluid passes.  In a turbine this is called the rotor which has a number of vanes or blades. The fluid passes through the blades and drives the rotor round transferring tangential momentum to the rotor. In a pump the tangential motion of the rotor as it rotates results in an increase in the tangential momentum of the fluid. This increase in kinetic energy is converted to pressure by decelerating the fluid in the discharge route from the pump. In a turbine the fluid passes over /through the impeller and loses energy (momentum and pressure) the energy being transferred to the rotor.

Rotodynamic machines are smooth and continuous in action with a consequent pulsation free flow from pumps and smooth rotation from turbines. In the event of pump discharge flow being suddenly stopped there are no high shock loads. Positive displacement machines can easily be damaged if a discharge valve is suddenly closed. Rotodynamic pumps are ideal for high flow low discharge head duties and provide compact reliable solutions.

http://www.flsmidthminerals.com/NR/rdonlyres/0B26153A-9015-4FEC-8B73-0F3BFEBCC72A/32353/

Centrifugal_pumps1.jpg

Page 2: steam turbine

Steam turbine

A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and converts it into rotary motion. Its modern manifestation was invented by Charles Parsons in 1884.

It has almost completely replaced the reciprocating piston steam engine (invented by Thomas Newcomen and greatly improved by James Watt) primarily because of its greater thermal efficiency and higher power-to-weight ratio. Because the turbine generates rotary motion, it is particularly suited to be used to drive an electrical generator – about 80% of all electricity generation in the world is by use of steam turbines. The steam turbine is a form of heat engine that derives much of its improvement in thermodynamic efficiency through the use of multiple stages in the expansion of the steam, which results in a closer approach to the ideal reversible process.

http://

en.wikipedia.org/wiki/File:Dampfturbine_Laeufer01.jpg

Impulse Turbines

An impulse turbine has fixed nozzles that orient the steam flow into high speed jets. These jets contain significant kinetic energy, which the rotor blades, shaped like buckets, convert into shaft rotation as the steam jet changes direction. A pressure drop occurs across only the stationary blades, with a net increase in steam velocity across the stage.

Page 3: steam turbine

As the steam flows through the nozzle its pressure falls from steam chest pressure to condenser pressure (or atmosphere pressure). Due to this relatively higher ratio of expansion of steam in the nozzle the steam leaves the nozzle with a very high velocity. The steam leaving the moving blades is a large portion of the maximum velocity of the steam when leaving the nozzle. The loss of energy due to this higher exit velocity is commonly called the "carry over velocity" or "leaving loss".

http://upload.wikimedia.org/wikipedia/commons/6/65/S_vs_pelton_schnitt_1_zoom.png

Page 4: steam turbine

Compounding in Impulse Turbine

If high velocity of steam is allowed to flow through one row of moving blades, it produces a rotor speed of about 30000 rpm which is too high for practical use.

It is therefore essential to incorporate some improvements for practical use and also to achieve high performance. This is possible by making use of more than one set of nozzles, and rotors, in a series, keyed to the shaft so that either the steam pressure or the jet velocity is absorbed by the turbine in stages. This is called compounding. Two types of compounding can be accomplished:

(a) Velocity compounding

(b) Pressure compounding

Either of the above methods or both in combination are used to reduce the high rotational speed of the single stage turbine.

The Velocity - Compounding of the Impulse Turbine

The velocity-compounded impulse turbine was first proposed by C.G. Curtis to solve the problems of a single-stage impulse turbine for use with high pressure and temperature steam. The Curtis stage turbine, as it came to be called, is composed of one stage of nozzles as the single-stage turbine, followed by two rows of moving blades instead of one. These two rows are separated by one row of fixed blades attached to the turbine stator, which has the function of redirecting the steam leaving the first row of moving blades to the second row of moving blades. A Curtis stage impulse turbine is shown in Fig with schematic pressure and absolute steam-velocity changes through the stage. In the Curtis stage, the total enthalpy drop and hence pressure drop occur in the nozzles so that the pressure remains constant in all three rows of blades.

 

 

 

 

Velocity is absorbed in two stages. In fixed (static) blade passage both pressure and velocity remain constant. Fixed blades are also called guide vanes. Velocity

Page 5: steam turbine

compounded stage is also called Curtis stage. The velocity diagram of the velocity-compound Impulse turbine is shown in Figure

 

Velocity diagrams for the Velocity-Compounded Impulse turbine

http://nptel.iitm.ac.in/courses/Webcourse-contents/IIT-KANPUR/machine/chapter_6/12.gif

The fixed blades are used to guide the outlet steam/gas from the previous stage in such a manner so as to smooth entry at the next stage is ensured.

K, the blade velocity coefficient may be different in each row of blades

 

Page 6: steam turbine

      Work done = 1

End thrust = 2

The optimum velocity ratio will depend on number of stages and is given by

• Work is not uniformly distributed (1st >2nd )

• The fist stage in a large (power plant) turbine is velocity or pressure compounded impulse stage.

The Pressure - Compounded Impulse Turbine

To alleviate the problem of high blade velocity in the single-stage impulse turbine, the total enthalpy drop through the nozzles of that turbine are simply divided up, essentially in an equal manner, among many single-stage impulse turbines in series (Figure 24.1). Such a turbine is called a Rateau turbine, after its inventor. Thus the inlet steam velocities to each stage are essentially equal and due to a reduced Δh.

Pressure-Compounded Impulse Turbine

http://nptel.iitm.ac.in/courses/Webcourse-contents/IIT-KANPUR/machine/chapter_6/24.1.gif

Page 7: steam turbine

Pressure drop - takes place in more than one row of nozzles and the increase in kinetic energy after each nozzle is held within limits. Usually convergent nozzles are used

We can write

1

2

 

Where is carry over coefficient

Reaction Turbine

These turbines develop torque by reacting to the fluid's pressure or weight. The pressure of the fluid changes as it passes through the turbine rotor blades. A pressure casement is needed to contain the working fluid as it acts on the turbine stage(s) or the turbine must be fully immersed in the fluid flow (wind turbines). The casing contains and directs the working fluid and, for water turbines, maintains the suction imparted by the draft tube. Francis turbines and most steam turbines use this concept. For compressible working fluids, multiple turbine stages may be used to harness the expanding gas efficiently. Newton's third law describes the transfer of energy for reaction turbines.

The moving blades of a reaction turbine are easily distinguishable from those of an impulse turbine in that they are not symmetrical and, because they act partly as nozzles, have a shape similar to that of the fixed blades, although curved in the opposite direction. The schematic pressure line (Fig. 24.2) shows that pressure continuously drops through all rows of blades, fixed and moving. The absolute steam velocity changes within each stage as shown and repeats from stage to stage. Figure 24.3 shows a typical velocity diagram for the reaction stage.

Page 8: steam turbine

http://en.wikipedia.org/wiki/File:Sanxia_Runner04_300.jpg

 

Three stages of reaction turbine indicating pressure and velocity distribution

Page 9: steam turbine

http://nptel.iitm.ac.in/courses/Webcourse-contents/IIT-KANPUR/machine/chapter_6/11.gif

Pressure and enthalpy drop both in the fixed blade or stator and in the moving blade or Rotor

Degree of Reaction =

or,        1

A very widely used design has half degree of reaction or 50% reaction and this is known as Parson's Turbine. This consists of symmetrical stator and rotor blades.

 

The velocity diagram of reaction blading

The velocity triangles are symmetrical and we have

Energy input per stage (unit mass flow per second)

Page 10: steam turbine

2

3

From the inlet velocity triangle we have,

Work done (for unit mass flow per second)

4

Therefore, the Blade efficiency

5

Reaction Turbine, Continued

Put then

6

For the maximum efficiency and we get

7

from which finally it yields

                     8

 

Page 11: steam turbine

Velocity diagram for maximum efficiency

Absolute velocity of the outlet at this stage is axial (see figure 25.1). In this case, the energy transfer

9

can be found out by putting the value of in the expression for blade efficiency

10

11

Is greater in reaction turbine. Energy input per stage is less, so there are more number of stages.


Recommended