STEEL FOR COLD FORMING AND DEEP DRAWING APPLICATION

IS Specification JIS Specification EN Specification / DIN Specification ASTM /SAE Specification YS Min, Mpa UTS Min, Mpa Elongation, Min EStIL Size Capability

IS 1079 'HR1' OR HR0 - - - 170 290 <=28% Refer Table no. 1

IS 1079 'HR1' with Cu - - - 170 290 <=28% Refer Table no. 1

IS 1079 'HR2' JIS G 3131 SPHC EN 10111- DD11 ASTM A 1011 CS Type B 170 290 <=30% Refer Table no. 1

IS 1079 'HR3' JIS G 3131 SPHD EN 10111- DD12, DD13 ASTM A 1011 DS Type B 170 290 <=33% Refer Table no. 1 DIN 1614 STW22/STW24

IS 1079 'HR4' JIS G 3131 SPHE EN 10111- DD13, DD14 ASTM A 1011 DS Type B 170 290 <=36% Refer Table no. 1

8