Steel Products Site Specific Buyers Guide

Site Specific Buyers GuideMTS Wireless ComponentsStep-by-Step Instructions

Steel Products

introduction

This Site Specific Buyers Guide provides you with essential information to identify

the steel products needed for your site specific applications. It takes you step-by-step

through the decision making process of ordering antenna mounting components for

lattice towers, monopoles, and roof-top applications. Since no two sites are exactly

the same, this easy-to-use guide provides the questions and answers you need to

consider for each unique site and product type. Now you can be assured that the

products you order are correct for your wireless component requirements.

Ordering Steel Products has never been easier.

For a complete list of steel products and detailed specifications, visit

www.andrew.com/products/steel or request the Steel Products Catalog

(bulletin CA-101163-EN).

customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com

tower applications...............................................................................1

quick-tee™ sector frames .....................................................................................2

universal cable ladder kits....................................................................................3

star support brackets ...........................................................................................3

monopole co-location applications ........................................................4

monopole co-location t-frame kits ........................................................................5-6

low-profile co-location platform kits......................................................................6-7

upper support rail kits for co-location platforms ........................................................7

low profile chain mounts......................................................................................8

ex-press™ coaxial mounting band.........................................................................8

roof-top applications ...........................................................................9

non-penetrating roof frames ...........................................................................10-11

cantilever wall mount bracket .............................................................................11

self splicing, coax cover kits ...............................................................................12

z-bracket, wall coax support covers.....................................................................12

horizontal z-brackets .........................................................................................12

two-post waveguide bridge kits ..........................................................................13

four-post waveguide bridge kits ..........................................................................13

equipment platform solutions...............................................................................14

index by part number ........................................................................15

table of contents

Choose the Quik-Tee™ Sector Frame (page 2)

1. What is the face width (determined by the horizontal pipe separation)?Options: 10 ft 6 in or 12 ft 6 in (14 ft 6 in available, not shown)

2. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 2, 3, or 4 pipes

3. What is the antenna pipe length (determined by the size of the antenna specified)Options: 72 in, 96 in, or 126 in

Choose the Cable Support (page 3)

Cable Ladder:

1. How many holes are required (determined by the amount of coaxial cable required, coaxial cable may be stacked using SnapStak™ hangers)Options: 6, 9, or 12 holes

2. What is the section length (determined by the length needed to reach the mount)?Options: 10 ft or 20 ft sections

Star Support Brackets:

1. What is the size of the tower leg?Options: up to 5 in or up to 10 in

Choose the Waveguide Bridge (page 13)

1. What is the bridge width (determined by the amount of coaxial cable required within the three levels)?Options: 12 in or 24 in

2. What is the anchorage type (determined by the ground surface)?Options: direct burial or base shoe

3. How many posts are required (determined by the amount of support required)?Options: 2 or 4 posts

4. What is the post length (determined by the height required)?Options: 10 ft 6 in, 13 ft 4 in, 15 ft, or 21 ft

Choose the Equipment Platform (page 14)

1. What platform size is required (determined by the size of the cabinets for the site,custom designs available)?Options: 10 ft x 10 ft, 10 ft x 15 ft, or 10 ft x 20 ft (for raw land-AL, for roof-top-DF)

1 customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com

Quik-Tee™ Sector Frame

(page 2)

Cable Ladder(page 3)

WaveguideBridge Kits(page 13)

Equipment Platform(page 14)

Tower Co-location

step-by-step application guide

customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com 2

Quik-Tee™ Sector FramesApplication: Lattice towers

Size: 10 ft 6 in (3.1 m) to 12 ft 6 in (3.8 m) face

Design: Welded frame with 48 in (1.2 m) stand-off

Feature: Quickly assembled, dual pivoting frame withuniversal taper kit. Patented.

Mounts to: Straight or tapered legs up to 8 in OD, 8 in angle 60°, or 6 in angle 90°

Material: Hot dip galvanized steel

Includes: Frame, clamps, stiff arm, pipes and saddlemounts

Order Separately: Additional stiff arm for increased wind rating

Face Width EPA (no ice, sq ft): EPA (1/2 in radial ice, sq ft):

10 ft 6 in Face 13.6 17.5

12 ft 6 in Face 16.3 20.6

Man Rating: 250 lb vertical man load at 15 mph (BWS)

Wind Rating*: 90 mph per latest revision of TIA/EIA 222 at 150 ft AGL

*Typical installation of four 72 in x 8 in panel antennas per sector

Wind rating* with use of second stiff arm, (purchased separately)

120 mph per latest revision of TIA/EIA 222

140 mph 3-second gust, Exposure “D” per FBC, at 150 ft AGL

NOTE: 14 ft 6 in Sector Frames available upon request

tower applications

ORDERING INFORMATION

Part Number Description Wt. lb Wt. kg Kit Qty.

Quik-Tee™ Sector Frames 10 ft 6 in (3.1 m) wide

QT-SF10-2-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 377.97 171.4 EachTwo 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.



QT-SF10-3-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 398.97 181 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.

QT-SF10-3-96 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 436.47 198 EachThree 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.

QT-SF10-3-126 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 455.07 206.4 EachThree 2-3/8 in OD x 126 in (60.3 mm OD x 3.2 m) pipe mounts included.

QT-SF10-4-72 Quik-Tee™ Sector Frame, 10 ft 6 in (3.1 m). 419.97 190.5 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.



Quik-Tee™ Sector Frames 12 ft 6 in (3.8 m) wide




QT-SF12-3-72 Quik-TeeTM Sector Frame, 12 ft 6 in (3.8 m). 413.96 187.8 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.




QT-SF12-4-96 Quik-Tee™ Sector Frame, 12 ft 6 in (3.8 m). 484.96 220 EachFour 2-3/8 in OD x 96 in (60.3 mm OD x 2.4 m) pipe mounts included.


Additional Stiff Arm Kit

SA-B10 Stiff Arm Bracket, with two threaded 2-3/8 in 53 24.1 EachOD x 63 in (60.3 mm OD x 1.6 m) pipes

10’-6”

(3.1m)

48” (1.2m)

40”(1m)

10’ -6” or 2’-6”

Stand-off Distance

Dual Pivot Points

(3.1m or 3.8m)

P A R T N U M B E R G U I D E

Q T - S F 1 2 - 3 - 7 2

DESCRIPTIONFACE

WIDTHPIPEQTY

PIPELENGTH

Quick-Tee Sector Frame

12’ 3 AntennaPipes

72”


2”(50.8mm)

18”

(457.2mm)

tower applications

Universal Cable Ladder Kits ORDERING INFORMATION


10 ft (3 m) Universal Cable Ladder Kits

CL-0610-U Universal Cable Ladder Kit, 20 in wide x 10 ft long 57 25.9 Each(355.6 mm x 3 m), 6-hole rung. Includes universal hardware kit for round and angle members.

CL-0910-U Universal Cable Ladder Kit, 30 in wide x 10 ft long 59 27.0 Each(762 mm x 3 m), 9-hole rung. Includes universal hardware kit for round and angle members.

CL-1210-U Universal Cable Ladder Kit, 38 in wide x 10 ft long 62 28.0 Each(1 m x 3 m), 12-hole rung. Includes universal hardware kit for round and angle members.

20 ft (6 m) Universal Cable Ladder Kits

CL-0620-U Universal Cable Ladder Kit, 20 in wide x 20 ft long 112 50.8 Each(355.6 mm x 6 m), 6-hole rung. Includes universal hardware kit for round and angle members.

CL-0920-U Universal Cable Ladder Kit, 30 in wide x 20 ft long 117 52.9 Each(762 mm x 6 m), 9-hole rung. Includes universal hardware kit for round and angle members.

CL-1220-U Universal Cable Ladder Kit, 38 in wide x 20 ft long 121 55.1 Each(1 m x 6 m), 12-hole rung. Includes universal hardware kit for round and angle members.

Application: Lattice towers

Size: 10 ft (3 m) and 20 ft (6 m) in three widths

Design: Angle rails with bolt-on channel rungs

Feature: Complete ladder kit

Mounts to: Round and angle legs


Includes: Ladder, splice plates, and attachment kits

20”(508mm)

40”(1.0m)

10’(3.0m)

20’(6.1m)

20”(508mm)

40”(1.0m)

20”30”

38”

(508mm)(762mm)

(965.2mm)

Star Support BracketsApplication: Lattice towers

Size: 3/4 in (19.1 mm) and 7/16 in (11.1 mm) holes

Design: Bolt together stand-off mount

Feature: Expandable mounting solution

Mounts to: Round and angle legs (see table)


Includes: Bracket



Tee Bracket Kits

SS-TB2550 Star Support Tee Bracket for 1-1/2 in to 5-9/16 in 8 3.6 EachOD (38.1 mm to 141.3 mm OD) round members and 2-1/2 in to 5 in (50.8 mm to 127 mm) angle members

SS-TB6080 Star Support Tee Bracket for 4 in to 10-3/4 in 10 4.5 EachOD (101.6 mm to 273.1 mm OD) round members and 4 in to 8 in (101.6 mm to 203.2 mm) angle members



Low-profile Co-location Platform

(pages 6-7)

Co-location T-frame Kit(pages 5-6)

Ex-Press™ Coax Mounting Bands

(page 8)

Waveguide Bridge Kits(page 13)

Equipment Platform (page 14)

Monopole Co-location

Choose the Monopole Antenna Mount Co-location Kit (pages 5-8)

Co-location T-frame Kits (3 sector with 36 in stand-off)

1. What is the face width (determined by the horizontal separation required)?Options: 12 ft 6 in or 14 ft 6 in

2. What is the ring mount size required (determined by the diameter of the monopole)?Options: 10 in to 30 in or 30 in to 60 in

3. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 6, 9, or 12 pipes

4. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in or 96 in

Low-profile Co-location Platform Kits (3 sector grated platform kit)

1. What is the face width (determined by the horizontal separation required)?Options: 12 ft 6 in or 14 ft 6 in

2. What is the ring mount size required (determined by the diameter of the monopole)?Options: 10 in to 30 in or 30 in to 60 in

3. How many antenna pipes are required (determined by the number of antennas per sector)?Options: 9 or 12 pipes

4. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in, 96 in, or 126 in

Low-profile Chain Mounts (3 or 6 sector kits)

1. How many antenna pipes are required?Options: 3 or 6 pipes

2. What is the antenna pipe length (determined by the size of the antenna specified)?Options: 72 in or 96 in

3. What size mount is required for the monopole?Options: 8 in to 30 in OD or 60 in OD

Upper Support Rail Kit(page 7)

Choose your Ex-Press™ Coaxial Mounting Band (page 8)

1. How many coaxial mounting bands are needed?Option: one band needed every 3 ft or 4 ft

Choose the Waveguide Bridge (page 13)

(See options on Page 1 of this guide)




monopole applications

Monopole Co-location T-frame Kits

Application: Monopoles

Size: 12 ft 6 in (3.8 m) and 14 ft 6 in (4.4 m) face

Design: 3-sector

Feature: Complete co-location kit

Mounts to: 10 in to 60 in (254 mm to 1542 mm) ODmonopole


Includes: Ring mount, support arm, and pipe mounts

Order Separately: Work platforms



12 ft 6 in (3.8 m) T-frame Kits, 10 in to 30 in (254 mm to 762 mm) OD

MC-K12S-6-72 Monopole Co-location T-frame Kit, 957.0 434.1 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.


MC-K12S-9-72 Monopole Co-location T-frame Kit, 1055.4 478.7 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.

MC-K12S-9-96 Monopole Co-location T-frame Kit, 1127.1 511.3 Each10 in–30 in OD, 36 in sand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 96 in pipe mounts.

MC-K12S-12-72 Monopole Co-location T-frame Kit, 1153.8 523.4 Each10 in–30 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.



MC-K12L-6-72 Monopole Co-location T-frame Kit, 1076.7 488.4 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with six 2-3/8 in OD x 72 in pipe mounts.


MC-K12L-9-72 Monopole Co-location T-frame Kit, 1175.2 533.1 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with nine 2-3/8 in OD x 72 in pipe mounts.


MC-K12L-12-72 Monopole Co-location T-frame Kit, 1273.7 577.8 Each30 in–60 in OD, 36 in stand-off, 12 ft 6 in face, with twelve 2-3/8 in OD x 72 in pipe mounts.


14 ft 6 in (4.4 m) T-frame Kits, 16 in to 30 in (330.2 mm to 762 mm) OD







T-frames continued on next page


12 ft 6 in Face 11.4 14.5

14 ft 6 in Face 12.8 16.3


Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA 222



2-3/8” OD(60.3mm)

3-1/2” OD(89mm)

12’-6” or 14’ -6”

(3.8m or 4.4m)

36”(914.4mm)


M C - K 1 2 S - 9 - 7 2

DESCRIPTIONFACE

WIDTHPIPEQTY

PIPELENGTH

Monopole T-Frame 12’ 10”-30”Ring

Mount

9AntennaPipes

72”





12 ft 6 in (3.8 m) Co-Location Platform Kits, 10 in to 30 in (254 mm to 762 mm) OD

MC-PK12S-9-72 Low-Profile Co-location Platform Kit, 1418.6 643.5 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.



MC-PK12S-12-72 Low-Profile Co-location Platform Kit, 1517.1 688.2 Each12 ft 6 in (3.8 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.



Low-profile platform kits continued on next page










Low-profile Co-location Platform KitsApplication: Monopoles

Size: 12 ft 6 in (3.8 m) or 14 ft 6 in (4.4 m) face

Design: Corner-grated platform

Feature: Complete kit

Mounts to: 10 in to 60 in OD (254 mm to 1524 mm)


Includes: Platform, ring mount, and pipe mounts.

Order Separately: Support rail kit

Monopole Co-location T-frame Kitscontinued


M C - P K 1 2 S - 1 2 - 9 6

DESCRIPTIONFACE

WIDTHPIPEQTY

PIPELENGTH

Monopole ColocationPlatform Kit

12’ 10”-30”Ring

Mount

12AntennaPipes

96”


12' -6" or 14' -6"(3.8m or 4.4m)





MC-PK14S-9-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1518.9 689.0 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.



MC-PK14S-12-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1617.4 733.7 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.

MC-PK14S-12-96 Low-Profile Co-location Platform Kit, 14 ft 6 in 1713.0 777.0 Each(4.4 m) face. 10 in to 30 in OD (254 mm to 762 mm), 31.4 in to 94.2 in (797.6 mm to 2392.7 mm) circumference. Twelve 2-3/8 in OD x 96 in (60.3 mm x 2.4 m) pipe mounts included.



MC-PK14L-9-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1805.5 819.0 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Nine 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.



MC-PK14L-12-72 Low-Profile Co-location Platform Kit, 14 ft 6 in 1904.0 863.7 Each(4.4 m) face. 30 in to 60 in OD (762 mm to 1524 mm), 94.2 in to 188.4 in (2392.7 mm to 4785.4 mm) circumference. Twelve 2-3/8 in OD x 72 in (60.3 mm x 1.8 m) pipe mounts included.





Upper Support Rail Kits for Co-location Platforms

MT-195-12 Upper Support Rail Kit for Co-location Platforms, 244.6 111.0 Each12 ft 6 in face.

MT-195-14 Upper Support Rail Kit for Co-location Platforms, 316.6 143.6 Each14 ft 6 in face.


12 ft 6 in Face 8.75 11.3

14 ft 6 in Face 10.2 13.1





Low-profile Co-location Platform Kitscontinued

12' -6" or 14' -6"(3.8m or 4.4m)

3-1/2" OD(89mm)

Upper Support Rail Kits for Co-location Platforms


6”To Pipe Face

(153mm)

16’Long Chain

(4.9m)

2-3/8”OD Pipe

(60.3mm)


Low Profile Chain MountsApplication: Monopoles

Size: 2-3/8 in (60.3 mm) OD pipe mounts

Design: 3- or 6- antenna chain mounts

Feature: Universal, low profile mount

Mounts to: 8 in to 60 in (203.2 mm to 1524 mm) OD


Includes: See ordering information



Triple Chain Mount Kits, 8 in to 30 in (203.2 mm to 711.2 mm) OD, 25 in to 94.2 in (635 mm to 2393 mm) circumference

CM-30T-72 Triple Chain Mount Kit, three 2-3/8 in OD x 113.76 51.6 Each72 in pipes, 8 ft chain


Triple Chain Mount Kits, 8 in to 60 in (203.2 mm to 1524 mm) OD, 25 in to 188 in (635 mm to 4785 mm) circumference



Six Antenna Chain Mount Kits, 14 in to 60 in (356 mm to 1524 mm) OD, 44 in to 188 in (1117 mm to 4785 mm) circumference

CM-606-72 Six Antenna Mount Kit, three 2-3/8 in OD x 231 104.8 Each72 in pipes, 16 ft chain

CM-606-96 Six Antenna Mount Kit, three 2-3/8 in OD x 275 124.7 Each96 in pipes, 16 ft chain


Wind Rating*: 120 mph (BWS) 1/2 in radial ice at100 ft AGL per latest revision ofTIA/EIA—222

*Typical installation of one 96 in x 10 in panel antenna per sectorTriple chain mount

Six antenna chain mount

6” to Pipe Face(153mm)

2-3/8” OD Pipe(60.3mm)

8’ or 16’Long Chain

(2.44m or 4.9m)

Ex-Press™ Coaxial Mounting BandApplication: Monopoles


Design: Coaxial support for the outside or inside of roundstructures

Feature: Universal expansion/compression band with quickclamp locking features. *Patent Pending

Mounts to: 10 in to 60 in (254 mm to 1524 mm) OD roundor polygon monopole

Material: Aluminum and hot dip galvanized steel

Includes: Bracket and hardware

Order Separately: Snap-in hangers, butterfly hangers, coaxial blocks



EX-P1060 Expansion/Compression Coaxial Mounting Band 6.2 2.8 Eachfor 10 in to 60 in (254 mm to 1524 mm) OD round or polygon monopoles or 36 in to 60 in (914.4 mm to 1524 mm) ID access tubes

EX-PH3 3 Hole Coaxial Mounting Bracket for expanding 2.8 1.2 Kit of 10line capacity on Ex-Press™ Band

3”(76.2mm)

2”(50.8mm)

1.25”(31.75mm)


C M - 6 0 T - 7 2

DESCRIPTIONMONOPOLE

ODPIPEQTY

PIPELENGTH

Chain Mount 60” 3Pipes

72”


Roof-top Applications


Cantilever Wall Mount Bracket

(page 11)

Equipment Platform

(page 14)

Self-splicing, Coax Cover Kits

for SnapStack™ Hangers

(page 12)

Non-penetratingRoof Frames

(pages 10-11)

Z-bracket, Wall Coax Support Coversfor SnapStak™ Hangers

(page 12)

Choose the Roof-top Antenna Mount (pages 10-11)

Non-penetrating Roof Frames

1. What is the face width (determined by the horizontal separation required)?

Options: 7 ft 6 in, 10 ft 6 in, 12 ft 6 in, or 14 ft 6 in

2. How many antenna pipes are required (determined by the number of antennas per sector)?

Options: 2, 3, or 4 pipes

3. What is the antenna pipe length (determined by the size of the antenna specified)?

Options: 72 in, 96 in, or 126 in

Cantilever Wall Mount Kit (solid and hollow walls)

1. How many kits are required?

Option: one kit per antenna

2. What is the antenna pipe length (determined by the size of the antenna specified)?

Options: 72 in, 96 in, or 126 in (order separately)

Choose the Cable Support-Roof-top Cover Applications (page 12)

Self-splicing Coaxial Cable Cover Kits

1. How many holes are required (determined by the amount of coaxial cables required, coaxial

cables may be stacked using SnapStak™ hangers)?

Options: 4, 8, or 12 holes

2. What are the stacking configurations available?

Options: 7/8 in cable (triple stacked), 1-1/4 in cable and 1-5/8 in cable (double stacked)

3. What is the section length (determined by the sectional length needed to reach the mount)?

Option: 8 ft

Z-bracket, Wall Coaxial Cable Support Covers (cover and Z-brackets sold separately)

1. How many holes are required (determined by the amount of coaxial cables required,

coaxial cables may be stacked)?

Options: 4, 8, or 12 holes

2. What is the width (determined by the amount of coaxial cables required,

coaxial cables may be stacked using SnapStak™ hangers)?

Options: 11-1/2 in, 23-1/2 in, or 35-1/2 in

3. What are the stacking configurations available?

Options: 7/8 in (triple stacked), 1-1/4 in and 1-5/8 in (double stacked)

4. What is the section length (determined by the sectional

length needed to reach the mount)?

Option: 8 ft

5. What Z-bracket is required (determined by

the cover purchased)?

Options: 4, 8, or 12 hole Z-bracket (2 per cover)




roof-top applications

Non-penetrating Roof FramesApplication: Roof-top

Size: 7 ft (2.1 m) to 14 ft 6 in (4.4 m) face

Design: Single sector roof mount

Feature: Complete kit


Includes: Rubber mats, and pipe mounts


Exposure "C" per UBC, at 100 ft AGL

*Typical installation of four 120 in x 8 in panel antennas per sectorEngineering data table for ballast available upon request



Non-Penetrating Roof Frame, 7 ft (2.1 m) wide

RF-N7-2-72 Non-Penetrating Roof Frame, 7 ft (2.1 m). 384.5 174.4 EachTwo 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.



Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m) wide

RF-N10-3-72 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 421.1 191.0 EachThree 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.



RF-N10-4-72 Non-Penetrating Roof Frame, 10 ft 6 in (3.2 m). 442.7 200.8 EachFour 2-3/8 in OD x 72 in (60.3 mm OD x 1.8 m) pipe mounts included.










Non-penetrating roof frames continued on next page

41.5”(1.05m)

33.1”(840.7mm)

74.6”(1894.8mm)

84”(2.1m)

Cinder BlockTrays

7’, 10’-6”, 12’ -6” or 14 -6”(2.1m, 3.1m, 3.8, or 4.4m)

100”

(2540.0mm)


R F - N 1 0 - 4 - 9 6

DESCRIPTIONFACE

WIDTHPIPEQTY

PIPELENGTH

Non-PenetratingRoof Frame

10’ 4 AntennaPipes

96”



Non-penetrating Roof Framescontinued










Non-penetrating roof frame

Cantilever Wall Mount Bracket

Application: Roof-top

Size: 14-1/2 in (368.3 mm) wide, 2-3/4 inor 5-1/2 in depth

Design: Z-shaped wall brackets

Feature: Low profile design

Mounts to: Solid or hollow walls


Includes: Two brackets, u-bolts, anchors, and wall mount hardware

Order Separately: 2-3/8 in (60.3 mm) OD pipe



MT-250 Cantilever Wall Mount Bracket. Order 2-3/8 in 20.6 9.3 Kit of 2(60.3 mm) OD pipe separately.

MT-250L Cantilever Wall Mount Bracket. 5-1/2 in Stand- 24.5 11.1 Kit of 2off. Order 2-3/8 in (60.3 mm) OD pipe separately.

Pre-Cut Plain End Pipe, Galvanized Steel

MT-651 Plain End Pipe 2-3/8 in OD x 72 in 21 9.53 Each(60.3 mm OD x 1.8 m)

MT-651-96 Plain End Pipe 2-3/8 in OD x 96 in 33.5 15.20 Each(60.3 mm OD x 2.4 m)

MT-537 Plain End Pipe 2-3/8 in OD x 126 in 39.7 18.01 Each(60.3 mm OD x 3.2 m)

12”

(305mm)

2-3/4” or 5-1/2”

(69.9mm or 139.7mm)

3”

(76.2mm)



Self Splicing, Coax Cover Kits for SnapStak™ Snap-in HangersApplication: Roof-top

Size: 8 ft (2.4 m) long

Design: Self-splicing cover with PVC sleeper supports and hold-down clamps, simplified cover installation

Feature: Stack up to two 1-5/8 in or three 7/8 in SnapStak™ hangers per hole–three versions

Mounts to: Non-penetrating design


Includes: Channel, three sleepers, hold-down clamps, and hardware

Order Separately: Adjustable splice for roof-top coaxial cable bridge

96”

(2.4m)

4” Square(101.6mm)

11-1/4”, 21-1/4” or 33”(285.8mm, 539.8mm or 838.2mm)

7”(177.8mm)



RT-CB4D Roof-Top Cover Kits for SnapStak™ 86.0 39.0 EachSnap-in Hangers, 4 holes



Shown with double 1-5/8 in SnapStak™ hangers.Allows triple stacking of 7/8 in SnapStak™ hangers.

Z-bracket, Wall Coax SupportCovers for SnapStak™ HangersApplication: Roof-top

Size: 8 ft (2.4 m) long

Design: Solid cover for 4-, 8-, and 12-hole z-brackets

Feature: Stack up to two 1-5/8 in or three 7/8 inSnapStak™ hangers per hole – three versions

Mounts to: Penetrating design


Includes: Cover

Order Separately: Z-brackets and anchors



WC-SC4D Z-bracket, Wall Coax Support Covers 73.3 33.2 Eachfor SnapStak™ Hangers. ZB-H4 Z-bracketssold separately.



Allows double stacking of 1-5/8 in SnapStak™ hangers.Allows triple stacking of 7/8 in SnapStak™ hangers.

96”

(2.4m)

11-1/2”, 23-1/2”, or 35-1/2”(292.1mm, 597mm, or 902mm)

9”(228.6mm)

Horizontal Z-bracketsApplication: Roof-top


Design: Z-shaped coaxial cable bracket

Feature: Fits any hanger style


Includes: Z-bracket

Order Separately: Mounting anchors



ZB-H4 Horizontal Z-bracket, 11 in (279.4 mm) wide 2.6 1.2 Eachfor seven runs of coaxial cable

ZB-H8 Horizontal Z-bracket, 23 in (584.2 mm) wide 5.3 2.4 Eachfor fourteen runs of coaxial cable

ZB-H12 Horizontal Z-bracket, 35 in (889 mm) wide 8.1 3.7 Eachfor twenty two runs of coaxial cable

5-1/2”

(139.7mm)

2-7/8”

(73mm)

1-9/16”(39.7mm)

3/4”(19.1mm)

7/16”(11.1mm)


waveguide bridge components

12” or 24”(305 mm or 610 mm)

3-1/2” OD(89 mm)

13’ -4”, 15’ -4”, or 21’(4.1 m, 4.7 m, or 6.4 m)

10’(3.0 m)

Two-Post Waveguide Bridge Kits

Application: Waveguide bridge

Size: Two sizes

Design: Two-post, safety grating

Feature: Complete kit for coaxial cable support


Includes: Channel, posts, support brackets, caps, trapeze, and hardware



WB-K110-B Safety Grated Waveguide Bridge Kit, 325.0 147.4 Each12 in x 10 ft (0.3 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts

WB-K110-S Safety Grated Waveguide Bridge Kit, 308.0 139.7 Each12 in x 10 ft (0.3 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts

WB-K210-B Safety Grated Waveguide Bridge Kit, 385.0 174.6 Each24 in x 10 ft (0.6 m x 3.0 m), with two 13 ft 4 in (4.1 m) direct burial posts

WB-K210-B15 Safety Grated Waveguide Bridge Kit, 415.3 188.4 Each24 in x 10 ft (0.6 m x 3.0 m), with two 15 ft4 in (4.7 m) direct burial posts

WB-K210-B21 Safety Grated Waveguide Bridge Kit, 501.2 227.3 Each24 in x 10 ft (0.6 m x 3.0 m), with two 21 ft(6.4 m) direct burial posts

WB-K210-S Safety Grated Waveguide Bridge Kit, 367.0 166.5 Each24 in x 10 ft (0.6 m x 3.0 m), with two 10 ft 6 in (3.2 m) base shoe posts

24”(610 mm)

3-1/2” OD(89 mm)

10’

(3.0 m)

13’ -4”, 15’ -4”, or 21’(4.1 m, 4.7 m, or 6.4 m)

Four-Post Waveguide Bridge KitsApplication: Waveguide bridge

Size: 24 in x 10 ft (0.6 m x 3.0 m)

Design: Four-post, safety grating

Feature: Complete kit for coaxial cable support


Includes: Channel, posts, support brackets, caps, trapeze, and hardware



WB-K410-B Safety Grated Waveguide Bridge Kit, 596.0 270.3 Each24 in x 10 ft (0.6 m x 3.0 m), with four 13 ft 4 in (4.1 m) direct burial posts

WB-K410-B15 Safety Grated Waveguide Bridge Kit, 656.6 297.8 Each24 in x 10 ft (0.6 m x 3.0 m), with four 15 ft 4 in (4.7 m) direct burial posts

WB-K410-B21 Safety Grated Waveguide Bridge Kit, 828.3 373.7 Each24 in x 10 ft (0.6 m x 3.0 m), with four 21 ft(6.4 m) direct burial posts

WB-K410-S Safety Grated Waveguide Bridge Kit, 560.0 254.0 Each24 in x 10 ft (0.6 m x 3.0 m), with four 10 ft 6 in (3.2 m) base shoe posts

WB-K110-B WB-K210-S


site related components

4”(101.6mm)

14.50” Min21.50” Max.

. (368.3mm)(546.1mm)

10.50” Min.17.50” Max.

(266.7mm)(444.5mm)

10', 15', or 20'

(3.0 m, 4.6 m, or 6.1 m)

10'(3.0 m)

Equipment Platform SolutionsApplication: Equipment solutions

Size: 10 ft x 10 ft (3 m x 3 m), 10 ft x 15 ft (3 m x 4.6 m) or 10 ft x 20 ft (3 m x 6.1 m)

Design: Base kits for raw land or roof-top applications

Feature: Easy-to-assemble bolt together design


Includes: Frame, grating, and hardware

Order Separately: Extra legs when required



Equipment Platform Bases

EQ-P1010-B Equipment Platform, 10 ft x 10 ft 1570 712.15 Each(3 m x 3 m) base only.

EQ-P1015-B Equipment Platform, 10 ft x 15 ft 2210 1002.46 Each(3 m x 4.6 m) base only.

EQ-P1020-B Equipment Platform, 10 ft x 20 ft 3006 1363.52 Each(3 m x 6.1 m) base only.

Equipment Platforms for Raw Land Installations

EQ-P1010-AL Equipment Platform, 10 ft x 10 ft 1750 793.80 Each(3 m x 3 m) base with four adjustable legs

EQ-P1015-AL Equipment Platform, 10 ft x 15 ft 2480 1124.93 Each(3 m x 4.6 m) base with six adjustable legs

EQ-P1020-AL Equipment Platform, 10 ft x 20 ft 3366 1526.82 Each(3 m x 6.1 m) base with eight adjustable legs

Equipment Platforms for Roof-top Installations

EQ-P1010-DF Equipment Platform, 10 ft x 10 ft 1870 850 Each(3 m x 3 m) base with twelve displacement legs

EQ-P1015-DF Equipment Platform, 10 ft x 15 ft 2610 1186.4 Each(3 m x 4.6 m) base with sixteen displacement legs

EQ-P1020-DF Equipment Platform, 10 ft x 20 ft 3506 1593.6 Each(3 m x 6.1 m) base with twenty displacement legs

Equipment Platform Feet

EQ-P-AL Adjustable Leg for Equipment Platform for 45 20.41 Eachraw land installations

EQ-P-DF Weight Dispersement Leg for Equipment Platform 38 17.24 Each

Note: Equipment platforms in additional sizes available.Contact the Customer Support Center for details.

EQ-P-DF

16” Min.27” Max.

(406.4mm)(685.8mm)

8-1/4” Min. (209.6mm)19-1/4” Max. (489mm)

EQ-P-AL

customer support center • call us toll free • 1-800-255-1479 • fax 1-800-349-5444 • visit us at: www.andrew.com

CL-0610-U TW 3

CL-0620-U TW 3

CL-0910-U TW 3

CL-0920-U TW 3

CL-1210-U TW 3

CL-1220-U TW 3

CM-30T-72 MO 8

CM-30T-96 MO 8

CM-606-72 MO 8

CM-606-96 MO 8

CM-60T-72 MO 8

CM-60T-96 MO 8

EQ-P1010-AL SRC 14

EQ-P1010-B SRC 14

EQ-P1010-DF SRC 14

EQ-P1015-AL SRC 14

EQ-P1015-B SRC 14

EQ-P1015-DF SRC 14

EQ-P1020-AL SRC 14

EQ-P1020-B SRC 14

EQ-P1020-DF SRC 14

EQ-P-AL SRC 14

EQ-P-DF SRC 14

EX-P1060 MO 8

EX-PH3 MO 8

MC-K12L-12-72 MO 5

MC-K12L-12-96 MO 5

MC-K12L-6-72 MO 5

MC-K12L-6-96 MO 5

MC-K12L-9-72 MO 5

MC-K12L-9-96 MO 5

MC-K12S-12-72 MO 5

MC-K12S-12-96 MO 5

MC-K12S-6-72 MO 5

MC-K12S-6-96 MO 5

MC-K12S-9-72 MO 5

MC-K12S-9-96 MO 5

MC-K14L-12-72 MO 6

MC-K14L-12-96 MO 6

MC-K14L-6-72 MO 6

MC-K14L-6-96 MO 6

MC-K14L-9-72 MO 6

MC-K14L-9-96 MO 6

MC-K14S-12-72 MO 5

MC-K14S-12-96 MO 5

MC-K14S-6-72 MO 5

MC-K14S-6-96 MO 5

MC-K14S-9-72 MO 5

MC-K14S-9-96 MO 5

MC-PK12S-12-126 MO 6

MC-PK12S-12-72 MO 6

MC-PK12S-12-96 MO 6

MC-PK12S-9-126 MO 6

MC-PK12S-9-72 MO 6

MC-PK12S-9-96 MO 6

MC-PK14L-12-126 MO 7

MC-PK14L-12-72 MO 7

MC-PK14L-12-96 MO 7

MC-PK14L-9-126 MO 7

MC-PK14L-9-72 MO 7

MC-PK14L-9-96 MO 7

MC-PK14S-12-126 MO 7

MC-PK14S-12-72 MO 7

MC-PK14S-12-96 MO 7

MC-PK14S-9-126 MO 7

MC-PK14S-9-72 MO 7

MC-PK14S-9-96 MO 7

MT-195-12 MO 7

MT-195-14 MO 7

MT-250 RT 11

MT-250L RT 11

MT-537 RT 11

MT-651 RT 11

MT-651-96 RT 11

QT-SF10-2-126 TW 2

QT-SF10-2-72 TW 2

QT-SF10-2-96 TW 2

QT-SF10-3-126 TW 2

QT-SF10-3-72 TW 2

QT-SF10-3-96 TW 2

QT-SF10-4-126 TW 2

QT-SF10-4-72 TW 2

QT-SF10-4-96 TW 2

QT-SF12-2-126 TW 2

QT-SF12-2-72 TW 2

QT-SF12-2-96 TW 2

QT-SF12-3-126 TW 2

QT-SF12-3-72 TW 2

QT-SF12-3-96 TW 2

QT-SF12-4-126 TW 2

QT-SF12-4-72 TW 2

QT-SF12-4-96 TW 2

RF-N10-3-126 RT 10

RF-N10-3-72 RT 10

RF-N10-3-96 RT 10

RF-N10-4-126 RT 10

RF-N10-4-72 RT 10

RF-N10-4-96 RT 10

RF-N12-3-126 RT 10

RF-N12-3-72 RT 10

RF-N12-3-96 RT 10

RF-N12-4-126 RT 10

RF-N12-4-72 RT 10

RF-N12-4-96 RT 10

RF-N14-3-126 RT 11

RF-N14-3-72 RT 11

RF-N14-3-96 RT 11

RF-N14-4-126 RT 11

RF-N14-4-72 RT 11

RF-N14-4-96 RT 11

RF-N7-2-126 RT 10

RF-N7-2-72 RT 10

RF-N7-2-96 RT 10

RT-CB12D RT 12

RT-CB4D RT 12

RT-CB8D RT 12

SA-B10 TW 2

SS-TB2550 TW 3

SS-TB6080 TW 3

WB-K110-B WB 13

WB-K110-S WB 13

WB-K210-B WB 13

WB-K210-B15 WB 13

WB-K210-B21 WB 13

WB-K210-S WB 13

WB-K410-B WB 13

WB-K410-B15 WB 13

WB-K410-B21 WB 13

WB-K410-S WB 13

WC-SC12D RT 12

WC-SC4D RT 12

WC-SC8D RT 12

ZB-H12 RT 12

ZB-H4 RT 12

ZB-H8 RT 12

index by part number

15

Inches Fraction Inches Decimal Millimeters

1/16 0.0625 1.61/8 0.1250 3.23/16 0.1875 4.81/4 0.2500 6.45/16 0.3125 7.93/8 0.3750 9.57/16 0.4375 11.11/2 0.5000 12.79/16 0.5625 14.35/8 0.6250 15.9

11/16 0.6875 17.53/4 0.7500 19.1

13/16 0.8125 20.67/8 0.8750 22.2

15/16 0.9375 23.81 1.0000 25.4

Convert From Convert To Multiply By

Length

foot (ft) meter (m) 0.3048

inch (in) meter (m) 0.0254

inch (in) centimeter (cm) 2.5400

meter (m) foot (ft) 3.2808

meter (m) inch (in) 39.3700

centimeter (cm) inch (in) 0.3937

millimeter (mm) inch (in) 0.0393

Area

square foot (ft≈) square meter (m≈) 0.0929

square meter (m≈) square foot (ft≈) 10.7639

Circle

radius diameter 2.0000

diameter radius 0.5000

diameter circumference 3.1416

radius circumference 6.2832

Weight

pound (lb) kilogram (kg) 0.4536

kilogram (kg) pound (lb) 2.2046

reference and conversion chart

Gage Thickness (inches) Thickness (mm)

10 0.1345 3.416

11 0.1196 3.038

12 0.1046 2.657

13 0.0897 2.278

14 0.0747 1.897

15 0.0673 1.709

16 0.0598 1.519

Pipe Size OD (inches) OD (mm)

1/2” 0.84 21.34

3/4” 1.05 26.67

1” 1.32 33.40

1-1/4” 1.66 42.16

1-1/2” 1.90 48.26

2” 2.38 60.33

2-1/2” 2.88 73.03

3” 3.50 88.90

3-1/2” 4.00 101.60

4” 4.50 114.30

5” 5.56 141.30

6” 6.63 168.30

8” 8.63 219.08

AWG SizeStranded, OD (overall) Solid, OD

Inch Millimeter Inch Millimeter

4/0 0.528 13.41 0.460 11.68

2/0 0.419 10.64 0.409 10.39

1/0 0.373 9.47 0.324 8.23

2 0.292 7.42 0.257 6.53

4 0.232 5.88 0.204 5.18

6 0.184 4.66 0.162 4.11

8 0.146 3.70 0.128 3.25

10 0.116 2.94 0.102 2.59

pipe dimensions

steel thicknesses

AWG wire sizes

fraction/decimal/metric chart

conversion factors

NOTE: Not applicable to coaxial cables

All designs, specifications and availabilities of products and services presented in thisbulletin are subject to change without notice.

Bulletin BR-101198-EN (1/07)© 2007 Andrew Corporation, Westchester, IL 60154 USA

Customer Support CenterFrom North AmericaTelephone: 1-800-255-1479Fax: 1-800-349-5444

InternationalTelephone: +1-708-873-2307Fax: +1-708-349-5444

Internet: www.andrew.com

Andrew Corporation3 Westbrook Corporate CenterSuite 900Westchester, Illinois 60154 US

One Company. A World of Solutions.

Date post:	14-Apr-2015
Category:	Documents
Upload:	albert0726
View:	15 times
Download:	1 times

Steel Products Site Specific Buyers Guide

Documents