Steel sliding gatesmcr TLB

ASSA ABLOY, the global leader in door opening solutions

Mercor Doors, part of ASSA ABLOY Group, is a leading manufacturer of security fire-rated and non fire-rated doors, fixed screens, sliding gates and fire curtains in Poland. Our products are customised and certified according to European standards, and are designed to ensure people’s security, safety and convenience in residential and commercial buildings. Mercor Doors offers products that meet both safety and design requirements.

All ASSA ABLOY Mercor Doors products are approved for use in construction branch. Our products have successfully passed a series of tests in many European research centres. In our production plant, we have our own laboratory where research and development works are conducted systematically in order to increase permanently the technical parameters of solutions offered in order to meet growing customer expectations.

In our offer you can find:

Steel fire doors

Wooden fire doors

Profile doors and partitions

Sliding gates

Flexible rolling curtains

MERCOR GROUP DESCRIPTION

3

Sliding gates mcr TLB are used mainly in shopping centres, multi-storey car parks, storage houses and other industrial facilities.

CHARACTERISTICS:

single or double leaf, as well as multi-segment (so-called telescopic ones)

maximum gate sizes, large enough to meet the requirements of demanding designers and investors

an innovative gate guiding system is used with an electromagnetic closing speed controller, which guarantees long-lasting reliability and safety of using the sliding gates

available with pedestrian door

SLIDING GATES

4

STEEL SLIDING GATE MCR TLB EI 60 / EI 120

5

Application: Steel sliding gates mcr TLB are used as closure of openings in buildings where fire resistance is required. They are specifically designed for industrial buildings, logistic centres, offices, supermarkets etc.

Fire resistance: 60 minutes (EI260) and 120 minutes (EI2120) according to EN 1634-1.

Number of leaves: 1 or 2 (option: telescopic leaves positioning)

Thickness of the leaf: 90 mm

Standard finish: RAL 7035 colour

Possible finishes: coated steel (RAL colours: 5010, 9002, 9007, 9010, 9016, 7016, 7024) and powder painted steel (any colour from the RAL palette).

CONSTRUCTION OF GATE

The leaf of the gate consists of one or more panels. Each panel is made of two 0.8 mm galvanized steel sheets glued in with rock wool and gypsum core filling.

The edges of the panels are reinforced with steel U-shaped profiles. The panels are joined together by using H-shaped vertical connectors. Total thickness of the gate leaf is 92 mm.

The sliding mechanism consists of sliding rail, counterweight and guiding roll. The leaf of the gate is hang on the sliding rail which is made of unpainted, galvanized steel profile fixed to the wall with expansive anchors. The counterweight is connected to the leaf of the gate by using a steel cord.

DO

OR O

PENIN

G

DIRECTIO

NS

STEEL SLIDING GATE MCR TLB EI 60 / EI 120 SLID

ING

GATE O

PENIN

G

TO TH

E LEFTSLID

ING

GATE O

PENIN

G

TO TH

E RIGH

T

6

OPERATING

Mode of operation: at release of electric magnet the leaf of the gate is pulled to closed position by moving load of the counterweight. The counterweight is covered by rectangular steel casing.

For transport and installation the leaves and other elements of gate construction are covered with plastic film in order to protect them against mechanical damages.

DIMENSIONS

Larger sizes by individual assessment.

WIDTH min. 1 350 mm

WIDTH max. 16 000 mm

HEIGHT min. 1 900 mm

HEIGHT max. 6 000 mm

APPROVALS

Tested for fire resistance to EN 1634-1. Classified EI260 and EI2120 to EN 13501-2.

7

786786

786786

786786

786786

786786

length of sliding rail = 2x width of clear opening + 385

clear passage height

320m

in 150 w

idth of clear passage

min 230

185

width of panel

width of panel

width of panel

width of panel

clear opening

opening direction

213

50

hydraulic absorber roller for LINNING system

LINNING bracket

LINNINGbracket

roll for LINNING

sliding

hydraulicabsorber

hydraulic absorber installation bracket

installation bracket

max 6673 m

m – under condition that total surface does not exceed 32.8 m

2

max 6933 mm - under condition that total surface of gate does not exceed 32.8 m 2

electromagnetic speed regulator-

min 90

128 6.9

inserted handle height = 1055

roll of counterweight

counterweight

height of panel

cover of sliding rail

total width of panels

229

system LINNING

rail

electromagnetic speed regulator-

system LINNING

STEEL SLIDING GATE MCR TLB

8

STEEL SLIDING GATE MCR TLB WITH PEDESTRIAN DOOR

9

STEEL SLIDING GATE MCR TLB WITH PEDESTRIAN DOOR

Steel sliding gates mcr TLB EI60 can be supplied with pedestrian door fitted into it.

Pedestrian door is supplied with mortise lock, flat door handle installed on the wall side or panic bar on the evacuation side.

In standard version pedestrian doors are made without threshold.

10

STEEL SLIDING GATE MCR TLB WITH PEDESTRIAN DOOR

11

Sliding gates mcr TLB can be fitted with electric drives for automatic opening and closing in everyday use.

Electric drive LINNIG SB 4.1.2.1:

Drive Linnig SB 4.1.2.1 is used to open gates only.

The gate closes, as in standard gates, by using counterweight.

During closing, Linnig SB 4.1.2.1 acts in the same way as electromagnetic closing control.

Remote control can be used as an option.

Drives Linning SB 4.1.2.1 are used as standard equipment for gates with door leaf total surface from 34 m2 to 47 m2.

Electric drive TOUSEK PULL XR 10 or XR 15:

Drive Tousek in everyday work serves to open and close gates.

Operation of the drive is executed by either wall buttons or remote control pad (as an option).

In case of fire emergency the drive is automatically released and gate closed by counterweight. In order to set up the drive again, it is necessary to manually bolt the un-bolting mechanism.

ELECTRIC DRIVES

12

STEEL SLIDING GATE MCR TLB ECO

13

Application: Steel sliding gates mcr TLB ECO are used as closure of openings in buildings where fire resistance is required. They are specifically designed for industrial buildings, logistic centres, offices, supermarkets etc.

Fire resistance: 60 minutes EI2 60 / EI1 60 according to EN 1634-1.

Number of leaves: 1

Thickness of the leaf: 63 mm

Standard finish: RAL 7035 colour

Possible finishes: coated steel (RAL colours: 5010, 9002, 9007, 9010, 9016, 7016, 7024) and powder painted steel (any colour from the RAL palette)

STEEL SLIDING GATE MCR TLB ECO

CONSTRUCTION OF GATE

The leaf of the gate consists of one or more panels. Each panel is made of two 0.8 mm galvanized steel sheets glued in with rock wool and gypsum core filling.

The edges of the panels are reinforced with steel U-shaped profiles. The panels are joined together by using tongue & groove system. Total thickness of the gate leaf is 63 mm.

The sliding mechanism consists of sliding rail, counterweight and guiding roll. The leaf of the gate is hang on the sliding rail which is made of unpainted, galvanized steel profile fixed to the wall with expansive anchors. The counterweight is connected to the leaf of the gate by using a steel cord.

14

OPERATING

Mode of operation: at release of electric magnet the gate leaf is pulled to closed position by moving load of the counterweight. The counterweight is covered by rectangular steel casing.

For transport and installation the leaves and other elements of gate construction are covered with plastic film in order to protect them against mechanical damages.

DIMENSIONS

Dimensions of gate EI2 60:

WIDTH min. 1 500 mm

WIDTH max. 6 508 mm

HEIGHT min. 1 000 mm

HEIGHT max. 2 400 mm

Dimensions of gate EI1 60:

WIDTH min. 2 170 mm

WIDTH max. 5 424 mm

HEIGHT min. 1 800 mm

HEIGHT max. 2 400 mm

15

STEEL SLIDING GATE MCR TLB ECO

16

REFERENCE LIST

17

JØNI FOODLINE, production facility, Odense, Denmark

COPENHAGEN MARKETS, warehouse, Valby, Denmark

SDU, University of Southern Denmark, Odense, Denmark

MAERSK, logistic centre, Esbjerg, Denmark

HARALD NYBORG, warehouse, Odense, Denmark

SCANFLAVOUR, production facility, Møldrup, Denmark

BLUE WATER, logistic centre, Fredericia, Denmark

BLUE HORS, stallion station, Randbøl, Denmark

BESTSELLER LOGISTIC CENTRE, Hadeslev, Denmark

ETI European Food Industrie, Craiova, Romania

MICHELIN, logistic centre, Vác, Hungary

KONGRESNI TRG, parkinge garage, Ljubljana, Slovenia

BIOWARMTECENTRAL, Purmerend, Netherlands

ISO OMENA, shopping centre, Espoo, Finland

OSLO GARDENMOEN, airport, Oslo, Norway

GOODMAN, logistic centre, Saint Mard, France

VW Centre, Vilnius, Lithuania

REFERENCE LIST

18

Arkońska Business Park Arkońska 6/A2 80-387 Gdańsk, Poland

tel.: +48 58 732 63 00 fax: +48 58 732 63 02

mercordoors@assaabloy.com www.mercordoors.pl

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security safety and convenience