STEICO Building SystemProduct Information
• High load bearing capacity, long spans
• High dimensional stability
• Excellent manufacturing tolerances
• Compatible with existing timber sizesand connection methods
• High strength to weight ratio
• Reduced settlement
• Integrated construction and insulation system
• Efficient use of timber resources
| AREAS OF USE
I-Joists for floor joists, rafters or wall studs.
Laminated Veneer Lumber for joists,beams, studs, purlins, header and sole
plates, lintels and structural panels.
Construction elements –naturally made of timber
For more informationplease visit our website at www.steico.co.uk
STEICOBuilding System2
Nature shows us the way by producing slender constructions with maximumstability. Thefunctional principles are simple: Reduction. Where no material is required then no materialis wasted. The Result: Improved material properties with low weight and low primaryenergy consumptionwhilst providing the highest energy efficiency. TheSTEICObuildingsystemfollows these principles.
STEICOjoists are especially lightweight, energy efficient elements that usesaslender web material from natural fibreboard to connect the two flanges. Theflanges are made of laminated veneer lumber STEICO LVL R. This guaranteesconsistently high quality and defined strengths.
STEICO LVL consists of several layers of bonded softwood veneers. Thisstructuregives STEICO LVL its high strength. Laminated veneer lumber is one of the mostresilient timber construction materials available.
Following natures leadSTEICO construction products combine high loadbearingcapacity with the highest efficiency.
STEICO LVL: High load bearing capacityLaminated Veneer Lumber
STEICOjoist: lightweight and high strengthconstruction product
The STEICO Building System withSTEICOjoist, STEICOwall and STEICO LVL are
certified as Passive House componentsby the Passive House Institute.
STEICO Building System
STEICOBuilding System 3
STEICO Product overview
Individual components
STEICOjoist STEICOwall STEICO LVL R STEICO LVL XI-joist to European TechnicalApproval ETA-06/0238
I-joist to European TechnicalApproval ETA-06/0238
CE certified and manufacturedto EN 14374
CE certified and manufacturedto EN 14374
For use as floor joists,rafters or wall studs
For use as wall studs orfacades
Laminated Veneer Lumber forjoists, beams, studs, purlins,
rimboard
Laminated Veneer Lumber forstructural panels, rimboard,
headers and sole plates
1 2 3 4
1
1
2
3
3
3
4
4
3
4
STEICO I-joists STEICO Laminated Veneer Lumber
STEICOBuilding System4
Product overview individual components: STEICO I-joists
STEICOwall SWL 45 STEICOwall SWL 60 STEICOwall SWL 90
Package =43 pieces/package Package =33 pieces/package Package =23 pieces/package
Package =26 pieces/package Package =19pieces/package Package =13pieces/package
Pre-Insulated joist – All I-joistsare available with a pre insulated web
Standard length: 9.0 / 10.0/11.0/12.0/13.0m; Additional lengths and cuts available on requestExample SJL 45: S =STEICO, J =joist, L =Laminated Veneer Lumber flange, 45 =width of the flange in mm
STEICOjoist SJL 45 STEICOjoist SJL 60 STEICOjoist SJL 90
Package =43 pieces/package Package =33 pieces/package Package =23 pieces/package
200220240300360400
200220240300360400450500
200220240300360400450500
160200240300360
160200240300360400500
200240300360400500
The ideal joist for highly loadedstructural elements like rafters orfloor joists.
The optimum member for axiallyloaded components such aswall studs or spacers in platformconstruction and roof insulation.
The factory applied webinsulation ensures a uniformrectangular cross section. Thisallows efficient insulationwiththe flexible insulation battSTEICOflex.
I-JoistBuilding System for floors& roofs--
wallI-JoistBuilding System for walls--
3939
45
H39
39
45
H39
39
45
H
3939
60
H39
39
60
H39
39
60
H
3939
90
H39
39
90
H
160200240300360400
160200240300360400500
200240300360400500
3939
90
H
STEICOjoist/STEICOwall
insulated web
STEICO Building System
STEICOBuilding System 5
Product overview STEICO LVL
STEICO LVL R used for the construction of high load bearing floorstructures
STEICO LVL X as a stiffening decking element for pre-assembledfloorcassettes
height [mm]200220240300360400
thickness [mm]39457590
thickness[mm]24273033394557
length
12m
width 1,250mm(width up to 2,500mm on request)
length
6/12
m
STEICO LVL – Laminated Veneer LumberSTEICO LVL is made of multiple 3mm layers of graded laminated veneers. This disperses knots and irregular growth,producing a practically homogenous cross-section. This construction means that STEICO LVL is highly rigid anddimensionally stable.
LVLRLaminated Veneer Lumber
LVL XLaminated Veneer Lumber with cross-layers
Cross laminated STEICO LVL X means that ca. one-fifth ofthe veneers are glued crosswise – improving the lateralbending strength and stiffness of the joist.
Powerful engineered timber product for rectangular cross-sections. With STEICO LVL R elements all veneer layers areglued together longitudinally.
STEICOBuilding System6
Advantages
Production is monitored internallyand externall in order to ensureconsistent product quality.The STEICO I-joists are approvedunder ETA-06/0238.
kg
Reduced thermal bridging Improvementof base U-value levels by up to 15%. – Reduction oflow surface level temperatures
High load bearing capacitywith low self-weight Up to 3 times the weight saving
Pre-Insulated option Factory insulated joists ensure uniform rectangular cross-section
Easy installation of services Services can be run through holes in I-joist web
Defined moisture content close tothe material norm (8-12%) Reduces swelling and shrinkage dimensions
Usage of dimensionally stablematerials
Reduction in dimensional changesby up to 90% with changes inmoisture when compared to solid timber.
Cuts Cuts available on request
Resource saving by using timberas a raw material Timber is only used where it is required.
Usage of homogenous materials Defeined material stability and hence material reduction
Compatible components Compatible material thickness with STEICOflex or STEICOzellSTEICO LVL sizes in line with STEICOjoist
Usage of renewable materials STEICO products with FSC® and PEFC® certification ensure respon-
sible forest stewardship.
Fire protection Testing constructions up to F90-Bavailable
Certified quality Both the STEICOjoist and STEICO LVL are CE certified. Production issupervised by independent 3rd parties.
Design software STEICO offers single member and full design software packages forSTEICOjoist and STEICO LVL. Please contact us.
Passive House certificationThe STEICO Building System with STEICOjoist, STEICOwall andSTEICO LVL are certified as Passive House components by the PassiveHouse Institute.
Lightandeasy tohandle, perfectforuse inconversionprojectsandsiteswith limitedaccess
Reducethermal bridges
Usual rectangularsection with webinsulation
Easier Installation ofbuilding technology
Precisemanufacturingtolerances
Great bearing strength,large spans and stiffnessenabling long spans
Available in standardjoist dimensions andcustom depths
Can be processed usingstandard woodprocessing machines
Environmentally friendlyand recyclable
Advantages of the STEICO Building System
STEICO Building System
STEICOBuilding System 7
Optimised building fabric
Build up from inside to outside1 Plasterboard2 Structural timber board3 STEICOwall with STEICOzell air-injectedwood fibre insulation4 STEICOprotect H external render board5 Render system
Build up from outside to inside1 Counter batten, tile batten, roof covering2 STEICOuniversal sarking board3 STEICOjoist with STEICOzell air-injected wood fibre insulation4 Vapour control layer with batten5 Plasterboard
• Only 5 elements to make anecological vapour open system
• Robust external wood fibreinsulation system
• Vapour open –no additional vcl required
• High specific heat capacity of theexternalwood fibre board – warmwall surface hence less risk of algaeor mold
• Produced from renewable material
• Dimensional stability
• U values can be adjusted by varyingthe joist depth with minimaleffecton cost.
• Defined material moisture content
• Fire certification up toF90-B/REI90 available
• Secure STEICOuniversalsarking board
• Vapour open –no additional vcl required
• Excellentsummerheat protectiondueto highspecificheat capacity
• Often nopurlinsrequireandthereforeincreasedinternal room
• Produced from renewable materials
• Fire certification available
• U values can be adjusted by varyingthe joist depth with minimaleffecton cost
• Dimensional stability
• Definedmaterialmoisturecontent
Advantages of the system
Advantages of the system
5
1
4
2
3
3
2
4
1
5
External wall construction
Roof construction
engineered by nature
We spendapprox.80% of our livesinenclosed rooms.But are we alwaysaware what we are surroundingourselveswith? STEICO hasset itself the target ofdeveloping buildingproducts which considerthe needs of both manand nature. Our productsare therefore producedusing sustainable naturalmaterials. They help reduceenergy use and add considerably toa natural healthy internal climate.
STEICO insulation and constructionmaterials, carry a number of
distinguished s̒eals of approval̓which is a sign of high quality,healthy and functional buildingproducts. The raw materials used inSTEICO products are certified byFSC® (Forest Stewardship Council®)and PEFC® (Programme for theEndorsement of ForestCertification®),ensuring a traceable and fully
sustainable usageof the raw materials.STEICO, the number 1 choice for your
sustainable building solutions.
Renewableraw materialswithoutharmfuladditives
Excellentcoldprotectionin winter
Excellentsummerheatprotection
Excellentsoundprotection
Weathertightandbreathable
Environmentallyfriendlyandrecyclable
ExcellentFireProtection
Insulationfor healthyliving
Lightand easyto handle
Strongqualitycontrol
$Energysavingand increasedpropertyworth
Compatibleinsulation andstructuralbuildingsystems
Natural insulation and construction systemsfornew buildsand renovations – roof, ceiling, wall and floor
EuropeanTechnicalApprovalETA-06/0238
Your STEICO Partner
QualityManagementISO 9001:2015
www.steico.com
Date
09/2
018.
Valid
tosu
bseq
uent
revis
ions
.