Our People. Our Products.

TECHNICAL SPECIFICATION GUIDE

Stellar® Service Cranes and TMAX™ Service Bodies

10621 / 10630

SPECIFICATION INFORMATION

Crane Rating: 70,800 ft-lbs (9.79 ton-m)*

10621 Boom Length: 11’ (3.35 m) from CL of Crane10630 Boom Length: 13’ 4” (4.06 m) from CL of Crane

10621 Boom Extension: • 1st stage: Hydraulic 60” (152.4 cm) • 2nd stage: Hydraulic 60” (152.4 cm)

10630 Boom Extension: • 1st stage: Hydraulic 100” (254 cm) • 2nd stage: Hydraulic 100” (254 cm)

10621 Max. Reach: 21’ (6.40 m) from CL of Crane 10630 Max. Reach: 30’ (9.14 m) from CL of Crane

10621 Max. Vertical Lift: 23’ (7.01 m) from Crane Base 10630 Max. Vertical Lift: 31’ 9” (9.68 m) from Crane Base

Boom Elevation: -10˚ to +80˚

Stowed Height: 37.75” (95.5 cm)(crane only)

Mounting Space Required: 20” x 21” (50.8 x 53.3 cm)

Approximate Crane Weight: 10621 - 2,235 lbs (1,015 kg) 10630 - 2,580 lbs (1,170 kg)

Controls: Radio control standard for all functions.

Winch: • Rope Diameter: 7/16” (1.11 cm) • Line pull speed: 60 ft/min (18.29 m) • Max. single part line: 5000 lbs (2,268 kg) • Max. double part line: 10,000 lbs (4,535 kg)

Rotation: 400˚ power (worm gear)

10621 Lifting Capacities: 10,000 lbs @ 7’ (4,535 kg @ 2.13 m)** 3,365 lbs @ 21’ (1,525 kg @ 6.40 m)**

10630 Lifting Capacities: 10,000 lbs @ 7’ (4,535 kg @ 2.13 m)** 2,360 lbs @ 30’ (1,070 kg @ 9.14 m)**

Power Supply Required: PTO & Pump 8 gpm @ 3000 psi (30.3 lpm @ 207 bars)

Min. Rec. Chassis (GVRW) 25,999***

NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications.Specifications subject to change without notification.*Crane rating in Boost Mode. Normal crane rating is 60,000 ft-lbs (8.30 ton-m) **Maximum capacities in Boost Mode.***Guideline for Stellar® TMAX™ package with curbside rear crane. Consult with Stellar for other installations.

STELLAR® 10621/10630 TECHNICAL SPECIFICATION GUIDE

DEFINING CHARACTERISTICS

Stellar® CDTplus™ (Crane Dynamics Technology Plus™)The Stellar CDTplus control system is EXCLUSIVE TO STELLAR and features a NEW handheld transmitter with an over-molded rubber bumper system to maximize durability while keeping it lightweight. The new LCD display features operator feedback including real time load capacity, maximum distance with the current load, boom angle, and percentage of load. The boost feature allows a momentary increase in the capacity of the crane, and a Safe Mode to keep the crane and operator safe should a load indicating device fail to operate correctly. The new Stellar CDTplus remote handle features a rechargeable battery and an in-cab docking and recharging station.

Full Hydraulic Extension The Stellar CDTplus series offers cranes in either 21’ or 30’ of all hydraulic reach. No manual extensions.

Market Leading Boom ArticulationThe Stellar CDTplus cranes offer -10 degrees to +80 degree. This gives the operator both easy reach to snatch block stowing and the best ability to load items into the load bed.

Quick Release Snatch Block StowThe Stellar quick release snatch block stow is installed on the underside of the boom to easily stow your snatch block after use. Plus, its unique design gently releases the snatch block for use when the boom is raised at close to 60 degrees to ensure a safe and orderly deployment.

On-Demand Speed ControlThe Stellar exclusive on-demand speed control ramps engine RPM up only when the crane is being used. When the crane is not used for 5 seconds engine RPM returns to idle. This lowers fuel consumption and reduces noise pollution in the work area.

Maximum Foot-Pound RatingThe Stellar CDTplus series cranes offers robust ft. lb. ratings during standard mode and increases that by 18% during “Boost” mode to help you get maximum lift when you need it most.

Planetary WinchThe planetary winch on every crane manufactured by Stellar was designed to match the capacity and hydraulic control system. It lifts the maximum crane load and offers the smoothest and fastest speeds in the market today to help keep your productivity at maximum levels.

400 Degree Enclosed RotationStellar uses a durable enclosed rotation system with a cast iron base and an internal mechanical stop to provide the most durable rotation system found in the industry.

Greaseable Pivot BushingsEach pivot pin location on the CDTplus series crane includes bushings and grease zerks to provide for years of use.

Hexagonal BoomsStellar Industries made the hexagonal boom design famous in the telescopic service crane market. The hexagonal boom design is optimized to deliver dramatically less boom flex and side to side movement than other boom designs on the market.

Flip Sheave with Bar Style Anti-Two BlockThe Stellar CDTplus series is available standard with our patent pending flip sheave with a bar style ATB. The flip sheave allows for a shorter horse head profile which allows for boom placement in tight quarters, such as an equipment cab.

STELLAR® 10621/10630 TECHNICAL SPECIFICATION GUIDE stellarindustries.com

®

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 6000 lbs. (2720 kg). For greater loads, use 2 - part line.

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 6000 lbs. (2720 kg). For greater loads, use 2 - part line.

10621 CAPACITY CHART 10630 CAPACITY CHART

0’

2.4 m1.8 m1.2 m0.6 m2’ 4’ 6’ 8’

3.1 m10’

3.7 m12’

4.3 m14’

4.9 m16’

5.5 m18’

6.1 m20’

6.7 m22’

7.3 m24’

7.9 m26’

8.5 m28’

13’4”4.06 m

21’8”6.60 m

30’9.14 m

-10º

80º

0º

15º

30º

45º60º

2.4 m

1.8 m6’

8’

3.1 m10’

3.7 m12’

4.3 m14’

4.9 m16’

5.5 m18’

6.1 m20’

6.7 m22’

7.3 m24’

7.9 m26’

8.5 m28’

9.8 m32’

10.4 m34’

9.1 m30’

10000 lbs4535 kg

10000 lbs4535 kg

10000 lbs4535 kg

9000 lbs4080 kg

6365 lbs2885 kg

5195 lbs2355 kg

4500 lbs2040 kg

2765 lbs1250 kg

2000 lbs905 kg

4000 lbs1810 kg

2825 lbs1280 kg

2305 lbs1045 kg

2070 lbs935 kg

2865 lbs1295 kg

3195 lbs1445 kg

3915 lbs1775 kg

5535 lbs2510 kg

10000 lbs4533 kg

7510 lbs3405 kg

6130 lbs2780 kg

5310 lbs2405 kg

4570 lbs2070 kg

5390 lbs2445 kg

2810 lbs1275 kg

3315 lbs1505 kg

2030 lbs920 kg

2395 lbs1085 kg

3265 lbs1480 kg

2360 lbs1070 kg

3380 lbs1530 kg

2440 lbs1105 kg

3770 lbs1710 kg

2725 lbs1235 kg

4620 lbs2095 kg

3335 lbs1510 kg

6530 lbs2960 kg

4720 lbs2140 kg

4655 lbs2110 kg

5495 lbs2490 kg

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 5000 lbs (2270 kg). For greater loads, use 2 - part line.

Boost(If Equipped)

Standard

Model 10621 CraneSpecifications Sheet Page: 4 of 4

Crane Rating*:

Standard Boom Length:Boom Extension:

Maximum Horizontal Reach:

Maximum Vertical Lift:

Stowed Height (Crane Only):

Required Mounting Space:

Approximate Crane Weight:

Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:

Max. Single Part Line:

Max. Double Part Line:

Rotation (Worm Gear):

Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:

Winch Specifications

42.00in1.07m

11'-2"[ 3.41m ]

42.02in1.07m

19.19in0.49m

24.54in0.62m

CG 38.57in

12'-11"[ 3.93m ]

0.98m

12.19in0.31m

Model 10630 CraneSpecifications Sheet Page: 4 of 4

Crane Rating*:

Standard Boom Length:Boom Extension:

Maximum Horizontal Reach:

Maximum Vertical Lift:

Stowed Height (Crane Only):

Required Mounting Space:

Approximate Crane Weight:

Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:

Max. Single Part Line:

Max. Double Part Line:

Rotation (Worm Gear):

Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:

Winch Specifications

13'-3"[ 4.03m ]

12.19in0.31m

52.73in1.34m

20.29in0.52m

42.00in1.07m

24.54in0.62m

CG

0.98m 38.57in

14'-11"[ 4.54m ]

10621 DIMENSIONS 10630 DIMENSIONS

Model 10630 CraneSpecifications Sheet Page: 4 of 4

Crane Rating*:

Standard Boom Length:Boom Extension:

Maximum Horizontal Reach:

Maximum Vertical Lift:

Stowed Height (Crane Only):

Required Mounting Space:

Approximate Crane Weight:

Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:

Max. Single Part Line:

Max. Double Part Line:

Rotation (Worm Gear):

Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:

Winch Specifications

13'-3"[ 4.03m ]

12.19in0.31m

52.73in1.34m

20.29in0.52m

42.00in1.07m

24.54in0.62m

CG

0.98m 38.57in

14'-11"[ 4.54m ]

Model 10630 CraneSpecifications Sheet Page: 4 of 4

Crane Rating*:

Standard Boom Length:Boom Extension:

Maximum Horizontal Reach:

Maximum Vertical Lift:

Stowed Height (Crane Only):

Required Mounting Space:

Approximate Crane Weight:

Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:

Max. Single Part Line:

Max. Double Part Line:

Rotation (Worm Gear):

Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:

Winch Specifications

13'-3"[ 4.03m ]

12.19in0.31m

52.73in1.34m

20.29in0.52m

42.00in1.07m

24.54in0.62m

CG

0.98m 38.57in

14'-11"[ 4.54m ]

-10º

80º

0º

15º

30º

45º60º

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 5000 lbs (2270 kg). For greater loads, use 2 - part line.

0’

4’

6’

8’

10’

12’

14’

16’

18’

20’

22’

24’7.3 m

6.7 m

6.7 m

6.1 m

5.5 m

5.5 m

4.9 m

4.3 m

4.3 m

3.7 m

3.7 m

3.1 m

2.4 m

2.4 m

1.8 m

1.8 m

1.2 m

1.2 m0.6 m2’ 4’ 6’ 8’ 10’ 12’ 14’

15’16’ 18’ 22’

0’

11’3.35m

16’4.88m

21’6.40m

6535 lbs2965 kg5535 lbs2510 kg

4490 lbs2035 kg3805 lbs1725 kg

3420 lbs1550 kg2900 lbs1315 kg

Boost(If Equipped)

Standard

4080 kgs9000#

9000#

3000 lbs1360 kg

3540 lbs1605 kg

4325 lbs1960 kg

5100 lbs2310 kg

3300 lbs1495 kg

3890 lbs1760 kg

7425 lbs3365 kg

8760 lbs3970 kg

5165 lbs2340 kg

6090 lbs2760 kg

7005 lbs3175 kg

8265 lbs3745 kg

9900 lbs4490 kg

10000 lbs4535 kg

5425 lbs2460 kg

6400 lbs2900 kg

3960 lbs1795 kg

4670 lbs2115 kg

3950 lbs1790 kg

4660 lbs2110 kg

5900 lbs2675 k5

6960 lbs3155 kg

6435 lbs2915 kg5455 lbs2475 kg

3365 lbs1525 kg2855 lbs1295 kg

4425 lbs2000 kg3750 lbs1700 kg

6295 lbs2855 kg

7425 lbs3365 kg

10000 lbs4535 kg

10000 lbs4535 kg

10000 lbs4535 kg

TMAX Service Bodies

TMAX2-11™ Service Body (11’ Body)Applicable Chassis: Above 19,500 GVWR (22.5 tire size)

Cab to Axle: 84” (213.36 cm)Body Length Nominal: 133” (337.82 cm)Body Height: 52” (132.08 cm)Body Width: 94” (238.76 cm)Compartment Depth: 22” (55.88 cm)Floor Width: 50” (127 cm)Net Weight: 4,560 lbs (2068.38 kg)

TMAX2-14™ Service Body (14’ Body)Applicable Chassis: Above 19,500 GVWR (22.5 tire size)

Cab to Axle: 120” (304.8 cm)Body Length Nominal: 157” (398.78 cm)Body Height: 52” (132.08 cm)Body Width: 94” (238.76 cm)Compartment Depth: 22” (55.88 cm)Floor Width: 50” (127 cm)Net Weight: 5,090 lbs (2308.79 kg)

190 State StreetP.O. Box 169

Garner, IA 50438Telephone: (641) 923-3741 • (800) 321-3741

Fax: (641) 923-2812Internet: www.stellarindustries.comEmail: sales@stellarindustries.com

An Employee Owned Company.Copyright © 2020 Stellar Industries, Inc.

STL000062 4/2020

Our People. Our Products.

®Your local distributor:

TMAX2-11™ Aluminum Service Body (11’ Body)Applicable Chassis: Above 19,500 GVWR (22.5 tire size)

Cab to Axle: 84” (213.36 cm)Body Length Nominal: 133” (337.82 cm)Body Height: 60” (152 cm)Body Width: 94” (238.76 cm)Compartment Depth: 22” (55.88 cm)Floor Width: 50” (127 cm)Net Weight: 3,695 lbs (1676 kg)

TMAX2-14™ Aluminum Service Body (14’ Body)Applicable Chassis: Above 19,500 GVWR (22.5 tire size)

Cab to Axle: 120” (304.8 cm)Body Length Nominal: 157” (398.78 cm)Body Height: 60” (152 cm)Body Width: 94” (238.76 cm)Compartment Depth: 22” (55.88 cm)Floor Width: 50” (127 cm)Net Weight: 3,980 lbs (1805 kg)