STOCK CATALOG - Collins Walker, Inc."Our mission is to glorify God by working diligently, building...

"Our mission is to glorify God by working

diligently, building relationships, striving

for superior customer service, with a

commitment to integrity"

[email protected]

COLLINS WALKER INC.

STOCK CATALOG

COLLINS WALKER INC

11370 ANAHEIM DR.

DALLAS, TX 75229

972-247-5433

*CALL FOR PRICING*

*All returns must be in new condition and are subjuct to a 25% restocking fee.

**All sales final on special orders, spiral pipe, snap lock pipe, and flex duct. 5/9/2016

mailto:[email protected]

clint

Text Box

GO TO INDEX

PLENUM SLOT DIFFUSER (5715I) …………………………………………………………………

ROUND CEILING DIFFUSER (RNR) ………………………………………………………………

SQUARE CEILING DIFFUSER (RNS) ……………………………………………………………..

ARCHITECTURAL CEILING DIFFUSER (UNI) ……………………………………………………

ALUMINUM SQUARE CEILING DIFFUSER (ARNS) ……………………………………………

PERFORATED CEILING DIFFUSER (4320) ……………………………………………………….

PERFORATED CEILING RETURNS (4360, 61PR, 4302) ……………………………………….

PATTERN CEILING DIFFUSER (6500) ………………………………………………………..…..

CURVED BLADE CEILING DIFFUSER (61C) ………………………………………………………

DOUBLE DEFLECTION SIDEWALL SUPPLY REGISTER (61DVO) …………………………..

LOUVERED RETURN AIR GRILLE / REGISTER (6145H) ………………………………………..

EGGCRATE RETURN GRILLES (51EC) ……………………………………………………………

FILTER GRILLES (51F) ………………………………………………………………………………

NON-VISION DOOR GRILLE (61DGD) ……………………………………………………………

WALL LOUVERS & BRICK VENT …………………………………………………………………..

SHEET METAL ADAPTERS ………………………………………………………………………..

GRILLE ACCESSORIES - DAMPERS, INSULATION, & PLASTER FRAMES …………..……

CABLE OPERATED DAMPERS ……………………………………………………………………..

CEILING RADIATION DAMPERS …………………………………………………………………..

FIRE DAMPERS ………………………………………………………………………………………

COMBINATION FIRE / SMOKE DAMPERS …………………………………………………………

FIRE DAMPER ACCESSORIES …………………………………………………………………….

ACCESS DOORS ………………………………………………………………………………………

VIBRATION ISOLATION …………………………………………………………………………….

ROOF SUPPORTS …………………………………………………………………………………….

SMOKE DETECTORS ………………………………………………………………………………..

CEILING EXHAUST FANS …………………………………………………………………………..

ROOFTOP EXHUAST FANS ………………………………………………………………………..

ROOF CURBS ……………………………………………………………………………………...…..

SINGLE DUCT VAV …………………………………………………………………………………..

SPIRAL DUCT AND FITTINGS ……………………………………………………………………..

DUCT HANGERS …………………………………………………………………………………..….

SNAPLOCK PIPE AND FITTINGS ………………………………………………………………..…

FLEX DUCT ……………………………………………………………………………………………

DUCT ACCESSORIES - SCREWS, DUCT SEAL, TAPE, AND TOOLS …………………………

MAP LOCATION ……………………………………………………………………………………… 50

47

TABLE OF CONTENTS

43

44 - 45

46

31

32

33 - 37

38 - 41

22 - 25

26

27

28 - 29

14

15

16

21

17

9

4

5

6

18

19

10

11

12

13

49

48

ITEM PAGE

3

20

30

42

7

8



clint

Text Box

GO TO INDEX

Page 3

MODEL : 5715I

* Slot diffusers with integral TB plenum

* Surface mount frame available

* Quiet and efficient

* Adjustable air pattern

* 1 1/2" slot

*Internally Insulated

* Flat black finished face with white center tee

Height = 11" Plaster Frame Recommended Ceiling Opening:

Width = Diffuser Width + 1/2" ; Length = Diffuser Length +1/4"

ADD FOR

MODEL SLOT LENGTH WIDTH INLET CFM RANGE PRICE S/M

FRAME

5715 124 23 5/8 8" 0 - 130

5715 136 35 5/8 8" 0 - 170

5715 148 47 5/8 8" 0 - 210

5715 160 59 5/8 10" Oval 0 - 260

5715 224 23 5/8 8" 0 - 180

5715 236 35 5/8 10" Oval 0 - 280

5715 248 47 5/8 12" Oval 0 - 400

5715 260 59 5/8 12" Oval 0 - 480

PLENUM SLOT DIFFUSER

1 2 1/2

2 5



clint

Text Box

GO TO INDEX

Page 4

MODEL : RNR

* Spun steel construction

* Three concentric cones

* Two horizontal discharge patterns

* Removable inner core

* Designed for exposed duct or hard ceilings

* White powder coat finish

NECK DIFFUSER 4250

SIZE PRICE RADIAL DAMPER

6" 11 5/8 1 1/8 1 3/4

8" 14 3/8 1 1/2 2 1/8

10" 17 15/16 2 1/8 2 7/8

12" 21 5/8 2 3/8 3 1/8

14" 25 1/4 2 5/8 3 3/8

Ceiling Opening B = Duct Diameter + 1/2"

ROUND CEILING DIFFUSER

DIMENSIONAL DATA (inches)

E1C E2



clint

Text Box

GO TO INDEX

Page 5

MODEL : RNS3

* Steel construction

* High performance 360 degree diffusion

* Square face

* Round neck

* Louvered 3-cone (standard) & 4-cone (available)

* Removable core


PANEL ROUND DIFFUSER

SIZE NECK PRICE

6"

8"

10" 6"

12" 8"

14" 10"

6" 12"

8" 14"

10"

6"

8"

24 X 24

12 X 12

20 x 20

SQUARE CEILING DIFFUSER

4250

DAMPER

SURFACE MOUNT

FRAME



clint

Text Box

GO TO INDEX

Page 6

MODEL : UNI2


* High performance

* Square plaque face

* Round neck

* Removable inner core

* 360 degree diffusion



SIZE NECK PRICE

6"

8"

10" 6"

12" 8"

14" 10"

6" 12"

8" 14"

ARCHITECTURAL CEILING DIFFUSER

DAMPER

4250

SURFACE MOUNT

FRAME

24 X 24

12 X 12



clint

Text Box

GO TO INDEX

Page 7

MODEL : ARNS3

* Aluminum construction

* High performance

* Square face

* Round neck

* Louvered 3-cone diffuser

* 360 degree diffusion



SIZE NECK PRICE

6" 6"

8" 8"

10" 10"

12" 12"

14" 14"

ALUMINUM SQUARE CEILING DIFFUSER

SURFACE MOUNT

FRAME

24 X 24

DAMPER

4250



clint

Text Box

GO TO INDEX

Page 8

MODEL : 4320


* Adjustable discharge pattern

* 1, 2, 3, & 4 way pattern

* Flush face

* Round neck

* Removable face with spring latches


SURFACE

ROUND DIFFUSER MOUNT

NECK PRICE FRAME

6"

8"

10"

12"

14"

6"

8"

10"

12"

14"

6"

8"12 X 12

20 X 20

PERFORATED CEILING DIFFUSER

PANEL

SIZE

24 X 24



clint

Text Box

GO TO INDEX

Page 9

MODELS : 4360 / 61PR / 4302


* Lay-in frame / Surface mount / Panel only

* Flush face

* Round & square neck ( 4360 )

* Removable face ( 4360 )

* OBD available ( 61PR )


SURFACE

MODEL FRAME PANEL NECK PRICE MOUNT

SIZE FRAME

24 X 24 22 X 22

24 X 12 22 X 10

12 X 12 10 X 10

48 X 24 46 X 22

6" 8"

24 X 24 10" 12"

14"

24 X 24 16"

8 X 8 6 X 6

10 X 10 8 X 8

12 X 12 10 X 10

14 X 14 12 X 12

26 X 14 24 X 12

26 X 26 24 X 24

12 X 12

24 X 12

20 X 20

24 X 24

48 X 24

N/A

N/A

L/I PANEL4302

61PR S / M

PERFORATED CEILING RETURNS

4360 LAY IN 12 X 12 6" 8"



clint

Text Box

GO TO INDEX

Page 10

MODEL : 6500

* Square neck

* Fixed pattern

* Removable core

* 4 way blow pattern

* Square to round adapters available

* OBD available


NECK

SIZE

6 X 6

9 X 9

12 X 12

15 X 15

18 X 18

NECK

SIZE

6 X 6

9 X 9

12 X 12

15 X 15

18 X 18

PRICE

OBD

PRICE

DIFFUSER

PATTERN CEILING DIFFUSER

LAY IN T-BAR STYLE (24"x24")

DIFFUSER

PRICE

OBD

PRICE

SQUARE TO ROUND

SURFACE MOUNT STYLE

ADAPTER PRICE

SQUARE TO ROUND

ADAPTER PRICE

SURFACE MOUNTING

FRAME PRICE



clint

Text Box

GO TO INDEX

Page 11

MODEL : 61C


* Adjustable curved blades

* 1,2,3,4 & 2-way corner patterns

* 1 1/4" Border with 1" Flange


SIZE 1-WAY / 2-WAY 3-WAY / 4-WAY OBD

(W X H) CORNER** ADD

6 X 6

8 X 4

8 X 6

8 X 8

10 X 6

10 X 8

10 X 10

12 X 6

12 X 8

12 X 12

14 X 6

14 X 8

14 X 14

16 X 6

16 X 8

18 X 6

18 X 8

** Corner Blow in square sizes only

CURVED BLADE CEILING SUPPLY GRILLE



clint

Text Box

GO TO INDEX

Page 12

MODEL : 61DV-O


* Double deflection

* Adjustable vertical front blades

* Adjustable horizontal rear blades

* Opposed blade damper

* Face size 1-3/4" larger than neck size listed


SIZE PRICE SIZE PRICE SIZE PRICE

(W X H) (W X H) (W X H)

6 X 4 14 X 14 24 X 4

6 X 6 16 X 4 24 X 6

8 X 4 16 X 6 24 X 8

8 X 6 16 X 8 24 X 10

8 X 8 16 X 10 24 X 12

10 X 4 16 X 16 24 X 14

10 X 6 18 X 4 24 X 16

10 X 8 18 X 6 30 X 6

10 X 10 18 X 8 30 X 8

12 X 4 18 X 10 30 X 10

12 X 5 18 X 12 30 X 12

12 X 6 18 X 14 30 X 14

12 X 8 18 X 16 30 X 16

12 X 10 20 X 4 36 X 6

12 X 12 20 X 6 36 X 8

14 X 4 20 X 8 36 X 10

14 X 5 20 X 10 36 X 12

14 X 6 20 X 12 36 X 14

14 X 8 22 X 6 36 X 16

14 X 10 22 X 10

DOUBLE DEFLECTION SIDEWALL SUPPLY REGISTER



clint

Text Box

GO TO INDEX

Page 13

MODEL : 6145H


* Horizontal fixed deflection vanes

* Opposed blade damper available for some sizes

* Face size 1-3/4" larger that neck size listed


SIZE SIZE SIZE

( W X H) PRICE ( W X H) PRICE ( W X H) PRICE

6 X 4 18 X 14 30 X 14

6 X 6 18 X 16 30 X 16

8 X 4 18 X 18 30 X 18

8 X 6 18 X 30 30 X 24

8 X 8 18 X 36 30 X 30

10 X 6 20 X 6 36 X 6

10 X 8 20 X 8 36 X 8

10 X 10 20 X 10 36 X 10

12 X 6 20 X 12 36 X 12

12 X 8 20 X 14 36 X 14

12 X 10 20 X 20 36 X 16

12 X 12 20 X 25 36 X 18

12 X 24 24 X 6 36 X 24

14 X 6 24 X 8 36 X 36

14 X 8 24 X 10 48 X 24

14 X 10 24 X 12 48 X 30

14 X 12 24 X 14 48 X 36

14 X 14 24 X 16

16 X 6 24 X 18

16 X 8 24 X 24

16 X 10 24 X 30

16 X 12 24 X 36

16 X 14 24 X 48 SIZE

16 X 16 25 X 20 (W X H) PRICE

18 X 6 30 X 6 10* X 10*

18 X 8 30 X 8 22* X 10*

18 X 10 30 X 10 22* X 22*

18 X 12 30 X 12 46* X 22*

SIDEWALL RETURN AIR GRILLE

LAY-IN GRILLES

(NO SCREW HOLES)

*add 2" for ceiling module size



clint

Text Box

GO TO INDEX

Page 14

MODEL : 51ECL / 51ECS / ECC

* Available in lay-in / Surface mount / Core only

* Aluminum core / Aluminum frame (51ECL 51ECS)

* Plastic core only, available in white

MODEL FRAME NECK PANEL CORE DIM. PRICE NOTE

10 X 10 12 X 12 LAY-IN

22 X 10 24 X 12 LAY-IN

22 X 22 24 X 24 LAY-IN

46 X 22 48 X 24 LAY-IN

6 X 6 8 X 8 SCREW HOLES







22 X 10 24 X 12 LAY-IN

22 X 22 24 X 24 LAY-IN

24 X 12 PLASTIC CORE



EGGCRATE RETURN GRILLES

L/I

S/M

51ECL

51ECS

1/2"X1/2"X1/2"

1/2"X1/2"X1/2"

Core Only N/A 1/2"X1/2"X1/2"ECC-P

1/2"X1/2"X1"L/I51ECLCB



clint

Text Box

GO TO INDEX

Page 15


* Horizontal blade / Eggcrate / Perforated face

* Frames for 1" filters

* Lay-in / Surface mount

* Knurled knob / Latch fasteners


NECK FACE

SIZE SIZE MODEL TYPE PRICE

12 X 12 Neck + 1 3/4

24 X 12 Neck + 1 3/4 Louvered Face

24 X 24 Neck + 1 3/4 Surface Mount

48 X 24 Neck + 1 3/4

20 X 8 24 X 12

20 X 20 24 X 24

44 X 20 48 X 24

20 X 20 24 X 24

44 X 20 48 X 24

20 X 20 24 X 24

44 X 20 48 X 24

FILTER GRILLES

51FPL

Louvered Face Lay-in

Eggcrate Face Lay-in

Perforated Face Lay-in

51FB45-S

51FB45-L

51FEL



clint

Text Box

GO TO INDEX

Page 16

MODEL : 61DGD

* Steel Construction

* Double flange frame

* 1 1/4" margin

* Adjusts to door thickness 1 3/8" to 2"

* Completely sight proof

* 90 degree inverted "V" louver on 1/2" centers

* Architecturally pleasing & unabtrusive


SIZE PRICE

12 X 12

18 X 12

24 X 12

16 X 16

18 X 18

24 X 18

24 X 24

NON-VISION DOOR GRILLE



clint

Text Box

GO TO INDEX

Page 17

Louver Model : 1602D


* 2" deep drainalbe blades

* 1 1/2" flange

* Birdscreen

SIZE PRICE

12 X 12

Louver Model : 1604D


* 4" deep drainable blades

* 1 1/2" flange frame

* Birdscreen

SIZE PRICE

12 X 12

18 X 12

24 X 12

16 X 16

18 X 18

24 X 18

24 X 24

36 X 24

Brick Vent Model : 157-FL


* 1 1/2" deep

* 1" flange

* 15 5/8" x 7 3/4" (16 x 8 opening)

SIZE PRICE

16 X 8

WALL LOUVERS & BRICK VENTS



clint

Text Box

GO TO INDEX

Page 18

MODEL SIZE PRICE

6 RRA 4 6" TO 4"

6 RRA 5 6" TO 5"

8 RRA 6 8" TO 6"

8 RRA 7 8" TO 7"

10 RRA 8 10" TO 8"

10 RRA 9 10" TO 9"

12 RRA 8 12" TO 8"

12 RRA 10 12" TO 10"

14 RRA 12 14" TO 12"

15 RRA 14 15" TO 14"

16 RRA 14 16" TO 14"

16 RRA 15 16" TO 15"

MODEL SIZE PRICE

6X6 SRA 6 6X6 TO 6"

8X8 SRA 6 8X8 TO 6"

8X8 SRA 8 8X8 TO 8"

9X9 SRA 8 9X9 TO 8"

9X9 SRA 9 9X9 TO 9"

10X10 SRA 6 10X10 TO 6"

10X10 SRA 8 10X10 TO 8"

10X10 SRA 10 10X10 TO 10"

12X12 SRA 6 12X12 TO 6"

12X12 SRA 8 12X12 TO 8"

12X12 SRA 10 12X12 TO 10"

12X12 SRA 12 12X12 TO 12"

15X15 SRA 12 15X15 TO 12"

15X15 SRA 14 15X15 TO 14"

15X15 SRA 15 15X15 TO 15"

18X18 SRA 12 15X15 TO 15"

18X18 SRA 14 18X18 TO 14"

18X18 SRA 16 18X18 TO 16"

18X18 SRA 18 18X18 TO 18"

20X20 SRA 12 20X20 TO 12"

20X20 SRA 14 20X20 TO 14"

20X20 SRA 16 20X20 TO 16"

20X20 SRA 18 20X20 TO 18"

20X20 SRA 20 20X20 TO 20"

22X10 SRA 6 22X10 TO 6"

22X10 SRA 8 22X10 TO 8"

22X10 SRA 10 22X10 TO 10"

22X22 SRA 6 22X22 TO 6"

22X22 SRA 8 22X22 TO 8"

22X22 SRA 10 22X22 TO 10"

22X22 SRA 12 22X22 TO 12"

22X22 SRA 14 22X22 TO 14"

22X22 SRA 16 22X22 TO 16"

22X22 SRA 18 22X22 TO 18"

22X22 SRA 20 22X22 TO 20"

24X12 SRA 6 24X12 TO 6"

24X12 SRA 8 24X12 TO 8"

24X12 SRA 10 24X12 TO 10"

24X12 SRA 12 24X12 TO 12"

SHEET METAL ADAPTERS

Round to Round Reducing ( RRA )

Square to Round Reducers ( SRA )



clint

Text Box

GO TO INDEX

Page 19

OPPOSED BLADE DAMPERS FOR DIFFUSERS & GRILLES

Model : OBD

* Steel construction / Gang operated opposed blade dampers

* Clips to mount to grille or diffuser


6 X 4 12 X 6 18 X 6

8 X 4 12 X 8 18 X 8

6 X 6 12 X 12 18 X 12

8 X 6 14 X 6 18 X 18

8 X 8 14 X 8 22 X 10

9 X 9 14 X 14 22 X 22

10 X 6 15 X 15 24 X 12

10 X 8 16 X 6 24 X 24

10 X 10 16 X 8

RADIAL SLIDING DAMPER

Model : 4250

* Steel construction / Cost efficient volume control NECK SIZE

* Mounts directly to diffuser collar 6"

8"

10"

12"

14"

MOLDED INSULATION BLANKETModel : MIB SIZE

* Fits 24x24 round neck diffusers * R-6 24 x 24

DUCTBOARD BACK

Model : DBB SIZE

* Fits 22x22 square neck grilles * 6" high (I.D.) 24 x 24

AUXILARY FRAMES

Models : DFA

* Hard ceiling frames for plaster and sheetrock ceilings

MODEL SIZE PRICE

4824 DFA 48 X 24

2424 DFA 24 X 24

2412 DFA 24 X 12

1212 DFA 12 X 12

2020 DFA 20 X 20

GRILLE & DIFFUSER ACCESSORIES

PRICE

PRICE

PRICE



clint

Text Box

GO TO INDEX

Page 20

Models : CABLE OPERATED DAMPER

* 6"-10" 24 gauge galvanized steel

* 12"-14" 20 gauge galvanized steel

* Multiple cable lengths and controllers

SIZE PRICE

6"

8"

10"

12"

14"

SIZE PRICE

10 FT

5 FT

3 FT

SIZE PRICE

CEILING CUP

PLENUM MOUNT

CABLES

CONTROLLERS

CABLE OPERATED DAMPERS

CABLE OPERATED DAMPER



clint

Text Box

GO TO INDEX

Page 21

Models : 0722 Round

* 22 gauge galvanized steel

* UL Listed with fusible link ( 212 degree F standard )

* Fire blanket accessory 0725 available for 0722

SIZE PRICE

6"

7"

8"

10"

12"

14"

SIZE PRICE

24 X 24

24 X 12

12 X 12

FIRE BLANKET - 0725

CEILING RADIATION DAMPERS

ROUND NECK - 0722



clint

Text Box

GO TO INDEX

Page 22

MODEL : 0110H

* Galvanized steel construction

* Horizontal / vertical

* 1 1/2 hour UL labeled

* For use in 2 hour fire seperations or less

* Spring loaded damper blades

* Type A - blades in airstream


(W X H) (W X H) (W X H)

6 X 6 30 X 8 14 X 14

8 X 6 36 X 8 16 X 14

10 X 6 10 X 10 18 X 14

12 X 6 12 X 10 20 X 14

14 X 6 14 X 10 24 X 14

16 X 6 16 X 10 16 X 16

18 X 6 18 X 10 18 X 16

20 X 6 20 X 10 20 X 16

24 X 6 22 X 10 24 X 16

30 X 6 24 X 10 18 X 18

36 X 6 30 X 10 20 X 18

8 X 8 36 X 10 24 X 18

10 X 8 12 X 12 30 X 18

12 X 8 14 X 12 36 X 18

14 X 8 16 X 12 20 X 20

16 X 8 18 X 12 24 X 20

18 X 8 20 X 12 22 X 22

20 X 8 24 X 12 24 X 24

24 X 8 30 X 12 30 X 24

36 X 12 36 X 24

FIRE DAMPERS - RECTANGULAR NO SLEEVE



clint

Text Box

GO TO INDEX

Page 23

MODEL : 0114-12H


* 12" Integral sleeve with mounting angles





* Type A - blades in airstream


(W X H) (W X H) (W X H)

6 X 6 30 X 8 14 X 14

8 X 6 36 X 8 16 X 14

10 X 6 10 X 10 18 X 14

12 X 6 12 X 10 20 X 14

14 X 6 14 X 10 24 X 14

16 X 6 16 X 10 16 X 16

18 X 6 18 X 10 18 X 16

20 X 6 20 X 10 20 X 16

24 X 6 22 X 10 24 X 16

30 X 6 24 X 10 18 X 18

36 X 6 30 X 10 20 X 18

8 X 8 36 X 10 24 X 18

10 X 8 12 X 12 30 X 18

12 X 8 14 X 12 36 X 18

14 X 8 16 X 12 20 X 20

16 X 8 18 X 12 24 X 20

18 X 8 20 X 12 22 X 22

20 X 8 24 X 12 24 X 24

24 X 8 30 X 12 30 X 24

36 X 12 36 X 24

FIRE DAMPERS - RECTANGULAR WITH SLEEVE



clint

Text Box

GO TO INDEX

Page 24

MODEL : 0130H


* Round duct transitions





* Type C - 100% free area

SIZE

( D )

6"

8"

10"

12"

14"

16"

18"

FIRE DAMPERS - ROUND DUCT NO SLEEVE

PRICE



clint

Text Box

GO TO INDEX

Page 25

MODEL : 0134-12H


* Round duct transitions

* 12" Integral sleeve with mounting angles





* Type C - 100% free area

SIZE

( D )

6"

8"

10"

12"

14"

16"

18"

FIRE DAMPERS - ROUND DUCT WITH SLEEVE

PRICE



clint

Text Box

GO TO INDEX

Page 26

MODEL : 1271


* For use in fire and smoke control systems

* UL Listed - Meets UL555

* 16" - 20 guage sleeve and angles

* Available with 120 volt or 24 volt actuator

* Square to round adapters available for

Round pipe aplications

SIZE PRICE

8 X 8

12 X 12

18 X 18

24 X 12

24 X 24

COMBINATION FIRE / SMOKE DAMPER



clint

Text Box

GO TO INDEX

Page 27

MODEL FUSE DEGREE PRICE

165 Link 165 Degrees



MODEL LABLE PRICE

FD FIRE LABLE FIRE DAMPER

FD SMOKE LABLE FIRE / SMOKE DAMPER

* Mark inspection doors and access panels* White background & florescent red lettering* Size 3" x 1.5"

FIRE / SMOKE FIRE

DAMPER DAMPER

MODEL DESCRIPTION PRICE

Honeywell MS4104F10 120 Volt Replacement

Honeywell MS8104F10 24 Volt Replacement

Belimo FSLF120 120 Volt Replacement

Belimo FSLF24 24 Volt Replacement

* Two position, Power open, Spring closed, Both right & left hand drive compatable

* Can be used on dampers 6 square feet and less

* Larger motors available by special order

ELECTRIC ACTUATORS FOR CONTROL DAMPERS &

COMBINATION FIRE / SMOKE DAMPERS

FIRE DAMPER - FIRE / SMOKE DAMPER ACCESSORIES

REPLACEMENT FUSE LINKS

ACCESS DOOR LABLES



clint

Text Box

GO TO INDEX

Page 28

FIRE RATED ACCESS PANEL

Model : BIT - K

* Steel construction and prime coat

* UL Listed 1 1/2 hour rated for 2 hour fire walls

* Full length hinges and constant force closure springs

SIZE PRICE

12 X 12

16 X 16

18 X 18

24 X 24

ALL PURPOSE ACCESS PANEL

Model : BNT-C

* Steel construction and prime coat

* For drywall, plastered and masonry surfaces

* Full length hinges and screwdriver cam latch

SIZE PRICE

8 X 8

12 X 12

14 X 14

16 X 16

18 X 18

24 X 24

ALL PURPOSE STAINLESS STEEL ACCESS PANELModel : BNT - C - SS

* All stainless steel construction version of CNT - C

SIZE PRICE

8 X 8

12 X 12

16 X 16

18 X 18

24 X 24

ACCESS DOOR PRODUCTS



clint

Text Box

GO TO INDEX

Page 29

RECTANGULAR DUCT ACCESS DOOR

Model : HAD

* Double wall galvanized steel construction

* 1" thick insulated, dual gasketing

* Peening method installation

* Full length hinge and cammed operated latch

SIZE PRICE

6 X 6

8 X 8

10 X 10

12 X 12

14 X 14

16 X 16

18 X 18

24 X 24

ROUND DUCT ACCESS DOORModel : RAD

* 22 guage galvanized steel construction

* Insulated

* Gasketed - 20" w.g.

* Door size = (6", 8", 10") 8 x 4 oval / (Other Sizes) 12 x 8 oval

* Easy installation and easy access

DUCT DIAMETER PRICE

6"

8"

10"

12"

14"

16"

18"

20"-24"

DUCT ACCESS DOOR PRODUCTS



clint

Text Box

GO TO INDEX

Page 30

MODEL PRICE

VIHSS021

VIHSS022

VIHSF044

VIHSS024

VIHSA124

* Spring elements color-coded for easy field verification

* Load distribution steel washer

ALL PURPOSE HANGER MOUNT

MODEL PRICE

VIAPHA1

VIAPHA2

* Element incorporates projected collar to prevent metal to metal contact between rod and bracket.

* Embedded steel plates on top of element for uniform loading.

* Oil + water resistant element

NEO-SPRING HANGER

MODEL PRICE

VIHSNF-HM044

* Oil + water resistant rubber element

* Rubber element incorporates projected collar to prevent

metal to metal contact between rod and bracket.

RUBBER FOAM PAD MODEL PRICE

VIRFP030301

VIRFP060601

* Material: Closed cell, chemically cross-linked high density rubber foam.

* Maximum loading: 70 lbs/sq.in.

* Working range: 15 to 60 lbs/sq.in.

VIBRATION ISOLATION

SPRING ISOLATORS SIZE

SIZE

SIZE

25 LB HANGING SPRING





95 LB HANGING RUBBER

3" X 3" X 1" VIBRATION PAD GREEN

6" X 6" X 1" VIBRATION PAD GREEN

SIZE

120 LB HANGING RUBBER

100 LB NEO-SPRING HANGER



clint

Text Box

GO TO INDEX

Page 31

PRICE

* Accommodates standard 1-5/8” strut

* UV stabilized for long lasting support.

* USA Standard ASTMF F 1292-99.

* Support a load of 100 lbs per block

* Multiple blocks can be combined for

greater weight dispersion.

ECOFOOT QUICK FRAME - H FRAME *strut not included

PRICE

Each kit includes:

(2) Injection moulded feet

(2) Anti-vibration mats

(2) Strut base caps

(2) 90º strut brackets

(4) Spring nuts

(4) 1/2’ bolts

* Accommodates standard 1/2” threaded rod, or 1-5/8” strut

* Customize required support on site

* Keeps the roofing membrane safe and decking/insulation

below free of damage.

1/2" FIXING BOLT W/ PLATE

DESCRIPTION

DESCRIPTION

18" X 18" H FRAME

ROOF SUPPORTS

RAW RUBBER BLOCK *strut not included

8" RUBBER BLOCK



clint

Text Box

GO TO INDEX

Page 32

* Universal voltage model

115 VAC

24 VAC

24 VDC

* Ionization detector head (photoelectric

detector available)

* (2) Form "C" contacts and (1) trouble contact

* Visual indicators

* Manual test / reset switch

* Dual tube air sampling

* Duck mount template and screws

* UL 268A Listed

* Factory tube alignment

* Rugged steel back box with see-thru plastic cover

* Built-in power supply

* Less labor intensive


ION-2650 Universal ION Duct Detector

ST - 30 30" Sample Tube



536 Remote Alarm LED, Test / Reset Switch

543 Remote Alarm LED, Pilot LED, with Horn

544 Remote Alarm Horn, LED, Keyed Test / Reset

FIREX DUCT SMOKE DETECTORS

"Worth Asking For"

Additional accessories available by special order( see below )



clint

Text Box

GO TO INDEX

Page 33

ZEPHYR CEILING EXHAUST FANS

PRICE



clint

Text Box

GO TO INDEX

Page 34

MODEL PRICE

Z3H

Z5H

Z6 S/H

Z8 S/H

Z10 S/H

Z12S

Z12H

ZEPHYR CEILING EXHAUST FANS



clint

Text Box

GO TO INDEX

Page 35

NS*

NS*

NS*

NS*

NS*

NS*

NS*

NS*

NS*

NS*

(NS*) = NON-STOCKED MODEL

ZEPHYR & ZEPHYR INLINE PERFORMANCE DATA



clint

Text Box

GO TO INDEX

Page 36


Z1 ZT Z3H Z5H Z8 Z10 Z12 S Z12 H

ZJ1 Z6 H

LT 30 * * * *

LT 40 *

LT 50 * *

WCF 08 8" Aluminum Flashed Capf * * *

WCF 12 12" Aluminum Flashed Cap *

WCC 08 8" Aluminum Curb Cap * * *

WCC 12 12" Aluminum Curb Cap *

WC 10 3-1/4 X 10 * *

RWC 04 4" Aluminum *

RWC 06 6" Aluminum * *

RWC 08 8" Galvanized * *

RWC 10 10" Galvanized

RWC 12 12" Galvanized *

56337MM 3-1/4 X 10 TO 6" * *

56340MM 6 X 8 TO 8" * *

56341MM 6 X 8 TO 6" * *

56385MM 22 X 6 TO 12" *

20722 TDA 3, 5, 6 *

20723 TDA 8, 81 *

20724 TDA 10 *

20725 TDA 12, 101, 102, 121 * *

WALL CAPS

IN-LINE ADAPTER KITS

DUCT TRANSITIONS

ZEPHYR ACCESSORY GUIDE

ZEPHYR MODEL

SPEED CONTROLS

ROOF CAPS



clint

Text Box

GO TO INDEX

Page 37

SQUARE TO ROUND TRANSITION TDA INLINE ADAPTER

Fan Model Fan Outlet Round Dia. X Y

ZT, ZJ1, Z3, Z5, Z6 3 1/4 x 10 6" 10 6

Z8, Z10 8 x 6 6" or 8" 10 8

Z12 22 x 6 12" 14 10

20 10

WALL CAP

WC 10

FLASHED ROOF CAP CURB MOUNTED CAP

MODEL A (THROAT) B C E SQ F H L-DIA

WCF08 9 N/A 5 1/2 21 1/4 8 13 1/2 18 1/2

WCF12 13 N/A 7 24 10 17 25

WCC08 9 1 1/2 5 1/2 18 1/2 4 11 18 1/2

WCC12 13 2 7 20 1/2 4 13 25

Z10

Z12

ZEPHYR ACCESSORY GUIDE

Fan Model

Z3, Z5, Z6

Z8



clint

Text Box

GO TO INDEX

Page 38

PENN BARRY MODEL : DX-B

* Heavy gauge aluminum construction

* Non over-loading aluminum impellers

* Belts are static free, heat resistant, and oil resistant

* Prelubricated Bearings, duplex split pillow block

* Factory wired NEC, NBFU, and U.L.

* Continious duty, open drip proof, single speed motors

* Negative pressure motor colling system

* Disconnect switch

* Birdscreen

HP

DAMPER

PRICE

DX 08 B

FAN

MODEL

115/1/60

1/4 115/1/60

15.75 X 15.75

15.75 X 15.75

19 X 19

23 X 23

1/4

BELT DRIVE ROOFTOP EXHAUST FAN

ROOF CURB

DX 14 B

SIZE VOLTAGE

MOTOR

SIZE

1/4 115/1/6011.25 X 11.25

PRICE

DX 11 B

17 X 17

PRICE



clint

Text Box

GO TO INDEX

Page 39

Sone BHP Sone BHP Sone BHP Sone BHP Sone BHP BHP Sone BHP Sone BHP Sone

3.4 .02 2.7 .02

3.8 .03 3.1 .03

4.3 .03 3.5 .04 3.0 .03

4.6 .04 3.9 .04 3.3 .04

5.0 .05 4.2 .05 3.6 .05

5.5 .06 4.7 .06 4.0 .06 3.6 .05

6.0 .07 5.2 .07 4.5 .07 4.0 .07

4.9 .05 4.3 .06 3.6 .06

5.1 .06 4.6 .07 3.9 .07

5.5 .07 4.9 .07 4.3 .08

5.8 .07 5.3 .08 4.7 .09 4.1 .05

6.6 .09 6.1 .10 5.5 .10 5.0 .10

6.8 .10 6.3 .10 5.7 .11 5.2 .11

7.0 .11 6.5 .11 5.9 .12 5.4 .12

7.8 .13 7.2 .13 6.5 .14 6.0 .15 5.7 .13

8.5 .15 7.9 .16 7.3 .16 6.7 .17 6.3 .17

9.2 .17 8.7 .18 8.0 .19 7.3 .20 7.0 .20 6.8 .18

7.3 .08 6.7 .09 6.0 .09

9.7 .15 9.0 .17 8.3 .18 7.4 .18 6.3 .17

10.7 .19 10.1 .21 9.5 .22 8.8 .23 7.6 .22 6.9 .18

11.8 .23 11.2 .24 10.6 .26 10.0 .26 8.8 .26 7.6 .25

BELT DRIVE ROOFTOP EXHAUST FAN

DX08B

DX11B

DX14B

8422290 2077

9582606 2415 2226 1977 1699 1355

6801849 1582 1212

1835 1522 1104

10001724 1596 1451 1282 1080 706

9501638 1502 1347 1159 884

1465 1312 1126

9001552 1407 1238 1028 665

CFM vs. Static Pressure (in.wg)

880

530 393835

505655

700

644

RPM

609790

745

540

574

PERFORMANCE DATA

399

.750

444

351

330

247

.000 .125 .250

678 271 446 207

487

.375 .875.500 .625

925713 611 329496

6751164 959 638

7001207 1011 737

7251250 1062 813

252

1793 1495 831

874

7501293 1113 880

9102475 2276 2070

8251422 1263 1067 775

672800

1379 1213 1007

850



clint

Text Box

GO TO INDEX

Page 40

PENN BARRY MODEL : DX-D

* Heavy gauge aluminum construction

* Aluminum impellers

* Heavy duty yet lightweight design

* Motor compartment utilizes fan forced cooling system

* Multi-speed motor with thermal overload protection

* Speed controller included for high speed motor

* Factory wired polarized disconnect plug

* Birdscreen

HP

TIP

CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone CFM Sone

1/25 1300 3361 385 3.9 316 3.5 257 4.8 207 5.1 168 5.2 129 5.6

1/12 1550 4007 559 6.1 501 5.9 446 6.1 394 6.5 338 6.8 267 7.0

1/25 1050 3058 388 1.8 223 2.2 148 3.1 112 3.7 80 4.5 49 5.3

1/11 1300 3786 503 3.4 397 3.6 320 4.3 262 5.0 201 5.5 149 6.0

1/7 1550 4514 736 6.7 659 6.4 577 6.6 502 6.9 432 7.6 356 7.9

1/6 1050 3788 1738 9.9 1489 8 1256 6.6 1032 6.1 884 6.6 772 7.1

1/3 1300 4690 2021 12 1822 10.6 1637 9.5 1428 8.7 1256 8.4 1094 8.5

1/2 1550 5592 2348 13.8 2176 12.8 2014 12 1853 11.3 1685 10.7 1532 10.4

** Do not use speed controllers on low speed (V) or medium Speed(S); Only on High Speed (R)

MOTORROOF CURB

574

1/12

1/7

VOLTAGESIZE

115/1/60

MAX

WATTS

DX16R

DX16V

DX16S

453

510

82

.250" .375"

17 X 17

SPD. .500".000"

15.75 X 15.75

DX10S

1/219 X 19

.625"

PERFORMANCE DATA

CFM vs. Static Pressure

HP RPMMODEL

FAN

.125"

DX 16R

17 X 17

DIRECT DRIVE ROOFTOP EXHAUST FAN

MODEL

115/1/60

115/1/60

FAN

DX 10R 11.25 X 11.25

DAMPER

SIZE PRICE PRICE

DX 11R 11.25 X 11.25

PRICE

DX10R

DX11V

DX11S

DX11R

121

111

142

201



clint

Text Box

GO TO INDEX

Page 41

DX10R 20 7/8 DX11R

13 3/8 13 3/8

DX16VSR DX08B

DX11B DX14B

ROOFTOP EXHAUST FAN DIMESIONAL DATA

20 7/8

18 1/2 x 18 1/2 18 1/2 x 18 1/2

28 1/2

22 1/2

20 1/2 X 20 1/2



clint

Text Box

GO TO INDEX

Page 42

MODEL : RF CURB

* 18 Guage galvanized steel

* All welded construction

* 14 height

* Insulated

* 1 5/8" wood nailer

J K N M H

C27 27 X 27 X 14 33.5 27 22.5 19.5 14

C23 23 X 23 X 14 30.5 23 19.5 16.5 14

C19 19 X 19 X 14 27.5 19 16.5 13.5 14

C17 17 X 17 X 14 22.5 17 11.5 8.5 14

FLAT ROOF CURBS

MODEL SIZE (O.D.) PRICE

DIMENSIONS



clint

Text Box

GO TO INDEX

Page 43

MODEL : D3001 / P3001

* LineaCross multi-point averaging inlet sensor

* No controls ( D3001 )

* Pneumatic control ( P3001 )

* Slip and drive duct connections

* Controls enclosure ( D3001 )

* 120/24v transformer (D3001)

* Toggle disconnect (D3001)

MODEL LMHS-P

UNIT CFM WIDTH HEIGHT WITH SENSOR AND

SIZE RANGE (W) (H) 3011 PNEUMATIC

CONTROLLER

6 0 - 450 10 10

8 0 - 900 12 12 1/2

10 0 - 1500 14 12 1/2

12 0 - 2050 18 12 1/2

14 0 - 2550 24 12 1/2

16 0 - 3040 28 12 1/2

(BOX W/ SENSOR ONLY)

NO CONTROLS

SINGLE DUCT VAV

PRICEDIMENSIONS (INCHES)

MODEL LMHS-D

(PNEUMATIC)



clint

Text Box

GO TO INDEX

Page 44

SPIRAL DUCT AND FITTINGS

* Slip Fittings

* SMACNA Gauges

SESP SEE90 SEE45 SECPL SEBTO SEPLUG SEDPR**

DIAMETER10' SPIRAL

DUCT90° ELBOW 45° ELBOW COUPLING TAKE-OFF PLUG

MANUAL

DAMPER

4"

5" NS NS

6"

8"

10"

12"

14"

16"

18"

20"

22" NS

24" NS

26" * NS NS NS NS NS NS



**With 2" stand off

DIAMETER 90° ELBOW 45° ELBOW

6"

8"

10"

12"

SPIRAL DUCT AND FITTINGS

*LONG RADIUS STANDARD

*Sizes not stocked, but fabricated in house

SHORT RADIUS 90° LONG RADIUS 90°Short Radius Elbows



clint

Text Box

GO TO INDEX

Page 45

SPIRAL DUCT AND FITTINGS (CONT.)

SESR

4" TAP 8" BODY 12" TAP 12" BODY SPUN REDUCER 6" TO 4"


4" TAP 12" BODY 12" TAP 18/22" BODY SPUN REDUCER 10" TO 6"





6" TAP 14/18" BODY 14" TAP 20" BODY SPUN REDUCER 14" TO 12"

6" TAP 20/24" BODY 14" TAP 22/24" BODY SPUN REDUCER 16" TO 12"











10" TAP 22/24" BODY

DUCT MOUNTED REGISTERS

* Supply/return register with adjustable double deflection blades and a volume damper/extractor.

* Mounting directly on spiral duct

* Register taps are not required

13" X 3"

13" X 6"

17" X 3"

17" X 6"

21" X 6"

SPIRAL DUCT AND FITTINGS CONT.

SADDLE TAPS

SEST

SPUN REDUCERS

MODEL: RGS



clint

Text Box

GO TO INDEX

Page 46

PRICE (EA)

#2 LOOP HANGER CABLE - 10'

#2 LOOP HANGER CABLE - 15'

#2 LOOP HANGER SQ DUCT - 10'

#2 LOOP HANGER STRUT - 15'

#2 LOOP HANGER BARREL END - 10'

* #2 CABLE - 100LBS #3 CABLE - 200LBS

* Faster to install than traditional hanging systems

* Versatile #3 LOOP HANGER CABLE - 10'

* Simple to use #3 LOOP HANGER CABLE - 15'

* Strong, safe and industry approved #3 LOOP HANGER 3/8 THREADED - 15'

* Aesthetically discreet and lightweight

SINGLE POINT DUCT HANGERS

* For suspension of circular ducting SIZE PRICE

* Single point to hang duct using all-thread 8"

10"

12"

14"

16"

18"

20"

22"

24"

HANGING STRAP PRICE

* For low pressure/flex duct

* 30ga. steel; Rolls of 100' 100' OF 1.5" HANGING STRAP 30GA

DESCRIPTION

#2 GRIPPLE LOCK

DUCT HANGERS

GRIPPLE

#3 GRIPPLE LOCK

SIZE

100' OF 1" HANGING STRAP 30GA



clint

Text Box

GO TO INDEX

Page 47

SNAP LOCK PIPE AND FITTINGS

* Standard and SMACNA gauges available

* All pipe 12" and above and all elbows 10" and above are SMACNA gauges

* Many other taps and fittings available by special order

LPAELB LPFS LPSPIN LPFSD

DIAMETER5' SNAP

LOCK PIPE

3' SNAP

LOCK PIPE

ADJ.

ELBOW

FINGER SAVER

D/B COLLAR

SPIN IN

COLLAR

DAMPER

BLADE

4" NS NA NS NS

6" NA

8" NA

10" NA

12" NA

14" NA

16" NA NS

18" NA NS

20" NA NS NS

LPSLP

SMACNA

LPAELB

SMACNA

DIAMETER5' SNAP

LOCK PIPE

ADJ.

ELBOWPRICE

6"

8"

10"

14" X 12" X 12"

LPWYE

WYE

6" X 4" X 4"

8" X 6" X 6"

LPSLP

SNAP LOCK PIPE AND FITTINGS

10" X 8" X 8"

12" X 10" X 10"

12" X 12" X 12"



clint

Text Box

GO TO INDEX

Page 48

Model KM Flexible Duct

* Designed for low to medium pressure systems

* R-6.0 * 25' per bag

Positive: 10 inches (4"-16" ID), 6 inches (18"-20" ID)

Negative: ½ inch (4"-20" ID)

DIAMETER PRICE

4"

6"

8"

10"

12"

14"

16"

18"

20"

Model MK-E Flexible Duct

* Suitable for all pressure heating and cooling systems

* Acoustical duct offers exceptional sound control

* R-6.0 * 25' per box


Negative: 1 inch (4"-12" ID), 1/2 inch (14"-20" ID)

DIAMETER PRICE

6"

8"

10"

12"

14"

16"

18"

Model MK-C Flexible Duct

* Suitable for all pressure heating and cooling systems

* Most durable core available; promotes superior airflow

* R-6.0 * 25' per box


Negative: 2 inch (4"-16" ID)

DIAMETER PRICE

6"

8"

10"

12"

14"

16"

FLEX DUCT - THERMAFLEX

* Pressure Rating: (WG):





clint

Text Box

GO TO INDEX

Page 49

SCREWS

PRICE

SPEED PT SCREW 1/2" #10 (1000 COUNT)

SPEED PT SCREW 1/2" #10 (500 COUNT)

SELF TAP SCREW 1/2" #10 (1000 COUNT)

SELF TAP SCREW 1/2" #10 (500 COUNT)

WHITE TIP SCREW 1.5" #8 (250 COUNT)

AIRSEAL, FIRE SEAL, BRUSHES PRICE

TAPE & PANDUIT STRAP PRICE

BIG WILLY SOCKETS

PRICE

9/16" - 6"L WILLY SOCKET


2.5" 324A FOIL TAPE UL181A/B

PANDUIT STRAP 36" BAG OF 50

3" SCRIM TAPE

DESCRIPTION

2" PAINT BRUSH SB-2

2" 555 FLEX FIT METALIC TAPE

SIZE


DUCT ACCESSORIES / TOOLS

SIZE

DESCRIPTION

AIRSEAL 33 GREY 1 GALLON PAIL

FIRE SEAL 10.5OZ TUBE FS-T



clint

Text Box

GO TO INDEX

Page 51

MAP LOCATION

Google Maps Directions Collins Walker Website

COLLINS WALKER INC.11370 ANAHEIM DR.

DALLAS, TEXAS 75229

972-247-5433



clint

Text Box

GO TO INDEX

1. Prices are selling prices.

2. Payment terms are net 30 days from date of invoice with approved credit.

3. Items to be returned to stock are subject to a restocking fee.

4. All shipments from stock are F.O.B Dallas, freight prepaid and added to the invoice.

5. Warehouse warranties are standard manufacturers warranty.

6. Pricing is subject to change without notice.

7. Title to all material shall remain the sellers until the purchase is paid in full.

8. Claims : The respositbility of Collins Walker, Inc. ceases upon delivery of

materials in good order to the carrier. Any claims for damages, shortages,

or loss in transport must be filed by the customer against the transportion

company. Claims of shortage will not be considered unless made within

30 days after receipt of goods.

TERMS AND CONDITIONS OF SALE



clint

Text Box

GO TO INDEX

Date post:	15-Apr-2020
Category:	Documents
Upload:	others
View:	6 times
Download:	0 times

STOCK CATALOG - Collins Walker, Inc."Our mission is to glorify God by working diligently, building...

Documents