21
MATERIAL HANDLING - ESD - OFFICE PRODUCTS & ti y vit uc d Op ro p t m i g in s iz i a n e r g c n I Sp a c e CAT- 2013
MATERIAL HANDLING - ESD - OFFICE PRODUCTS
& ti yvit ucd Oprop t migins izia ner gcnI S pace
ALKON PLASTICS PVT. LTD.
Dgn.
& Pr
intB
y Av
i’sCr
eatio
ns: 9
8205
8766
1
This Catalog should not be reproduced as it is covered under Copyright Act.
Regd. Office : 801, Embassy Chamber, 3rd Road, Khar (W),Mumbai - 400 052, INDIA. Tel.: 0091- 22- 2604 2168, 2604 7567, 2604 9165Fax.: 0091- 22- 2605 1387E mail : [email protected]
STOCKIST
es gtora sl e otia ulrs tieV on s for all needs
CAT- 2013
KOALA PICK BINS
Outside Dimensions in mm Inside Dimensions in mm
AKP- 01 130 105 60 105 90 55
AKP- 11 180 105 90 155 90 85
AKP- 22 220 140 140 195 125 135
AKP- 32 300 140 140 270 125 135
AKP- 33 300 215 140 270 200 135
AKP- 35 300 435 140 270 410 135
AKP- 42 400 145 200 360 125 195
AKP- 43 400 215 200 360 200 195
All Dimension in mm Approx.
Length Width Height Length Width HeightART NO.
AKP-01K
11A P- K
2A P- 2
A P-33K
AKP-35
P 42AK -
-AKP 43
AKP-32
MADE FROM POLYPROPYLENE COPOLYMER.
KOALA BINS nest to save transportation cost by almost 70%.
The clear design of KOALA BINS make them easy to clean and use in
dust free environments like Hospitals.
Extra wide front face for sticking identification labels for easy content identification.
Provision for vertical dividers to increase storage options in KOALA BIN AKP-35.
KOALA BINS AKP-01 / AKP-11 / AKP-22 / AKP-32 / AKP-33 / AKP-35 have full
length rear lip supports provided for hanging bins on louvered panels or rails.
KOALA BINS AKP-32 / AKP-33 / AKP-35 / AKP-42 / AKP-43 designed to fit
roll post shelving systems.
Anti skid strips provided at the base.
46 www.alkonbins.com
47
Koala Bins Mounted on Universal Rail AUR 1
KOALA BIN AKP-35 VP
BIN PARTITIONVertical Partition for KOALA BIN AKP-35 available as
an accessory to increase storage options
KOALA BIN AKP-35 VERTICAL PARTITION
Art No.: AKP-35 VP
Universal rail ( SIZE 914 MM L X 75 MM H ) made from
steel and powder coated in grey color can be mounted on
any surface like walls, benches, slotted angle systems,
stands, and trolleys. These rails increase the flexibility of
using different sizes of bins with ease and help in optimizing
Storage space.
Art No.: AUR-1
are manufactured from 1.5 mm CRCA steel and powder coated in
grey color. KOALA BINS can be mounted with ease in variable
combinations as listed Below.
LOUVRE PANELS
All Dimensions in mm
No of Bins per UNIVERSAL RAIL
8 8 6 6 4
ART NO.
NO. OF BINS
AKP01
AKP22
AKP32
AKP33
AKP11
ART NO. SIZE AKP01
LOUVRE PANEL NUMBER OF BINS
LP 1 455 x 457 24 16 9 9 6 3
LP 2 455 x 610 32 20 12 12 8 4
LP 3 455 x 914 48 32 18 18 12 6
LP 6 455 x 1829 96 64 36 36 24 12
AKP22
AKP32
AKP33
AKP11
AKP35
AKP35
2
LP 3 Louvre Panel fitted with
Koala Pick Bins.
UNIVERSAL RAIL : AUR-1
www.alkonbins.com
48
Heavy duty double sided stand ideal for use with
KOALA BINS in different combinations as detailed below.
Please order KOALA BINS, Rails (AUR-1),
Stands (ARSS-2) separately as per your requirements.
Stand can be also used single sided as per requirement.
Art No.: ARSS-2
ARSS-2 DIMENSION 1030 X 635 X 1450 mm.
DOUBLE SIDED STAND : ARSS-2
Heavy duty double sided trolley base fitted with heavy duty castors.
Ideal for use with KOALA BINS in different combinations as required.
Please order KOALA BINS, Rails (AUR-1) and ARSS-3 ( It consists
of heavy duty trolley base ARSTM and Pipe set ARSP) separately.
Art No.: ARSS-3
ARSS-3 DIMENSION 1030 X 640 X 1620 mm.
(1030 mm including handles on both sides)
DOUBLE SIDED TROLLEY : ARSS-3
OF BINS TOTAL NO.
AKP-01 8 15 - 120
AKP-11 8 12 - 96
AKP-22 6 16 - 48
AKP-32 6 16 - 48
AKP-33 4 16 - 32
AKP-35 2 16 - 16
AKP-01 8 - 30 240
AKP-11 8 - 24 192
AKP-22 6 - 32 96
AKP-32 6 - 32 96
AKP-33 4 - 32 64
AKP-35 2 - 32 32
PER RAIL BINS RAILS PER ARSS
ART NO. Single Side Double Side
ARSS-2 StandWith Koala Pick bins AKP-32 on both sides
ARSS-2 StandWith Koala Pick bins AKP--33 on both sides
ARSS-3 TrolleyWith mixed Koala pick bins on both sides
www.alkonbins.com
49
LOUVRE PANEL STAND : FSS/L/3Free standing stand FSS/L/3 can be fitted with six numbers of LP2 LOUVRE PANELS on each side. Order louvre panels and bins separately.
ART NO.: FSS/L/3DIMENSION : 1371 X 630 X 1560 mm
LOUVRE PANEL STAND : FSS/L/2Free standing stand FSS/L/2 can be fitted with four numbers of LP2 LOUVRE PANELS on each side. Order louvre panels and bins separately.
ART NO.: FSS/L/2DIMENSION : 914 X 630 X 1560 mm
FSS
LOUVRE PANEL STAND : FSSFree standing stand FSS can be fitted with two numbers of LP2 LOUVRE PANELS on each side. Order louvre panels and bins separately.
ART NO.: FSSDIMENSION : 457 X 630 X 1560 mm
FSS/L/2
FSS/L/3
www.alkonbins.com
50
AKP-42 BIN SIZE
400 mm 145 mm 200 mm
AKP-32 BIN SIZE
300 mm 140 mm 140 mm
AKP-33 BIN SIZE
300 mm 215 mm 140 mm
AKP-35 BIN SIZE
300 mm 435 mm 140 mm
KOALA SHELVING SYSTEMS
ASU 49 Shelving Unit Consists of
1 Set of ASUB 124 Shelving Body
6 Nos. Shelves - Art No.: ASUS 400
6 Nos. AKP-42 Bins on each shelf
Total 30 Nos. AKP-42 Bins
( No Kick Plate in standard unit, If Kick Plate required then their will be 5 Nos. ASUS 400 Shelves & 24 Nos. AKP-42 Bins )
ASU 48 Shelving Unit Consists of
1 Set of ASUB 123 Shelving Body
8 Nos. Shelves - Art No.: ASUS 300
2 Nos. AKP-35 Bins on each shelf
Total 14 Nos. AKP-35 Bins
( No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 12 Nos. AKP-35 Bins )
ASU 47 Shelving Unit Consists of
1 Set of ASUB 123 Shelving Body
8 Nos. Shelves - Art No.: ASUS 300
4 Nos. AKP-33 Bins on each shelf
Total 28 Nos. AKP-33 Bins
( No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 24 Nos. AKP-33 Bins )
ASU 46 Shelving Unit Consists of
1 Set of ASUB 123 Shelving Body
8 Nos. Shelves - Art No.: ASUS 300
6 Nos. AKP-32 Bins on each shelf
Total 42 Nos. AKP-32 Bins( No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 36 Nos. AKP-32 Bins )
SHELVING UNIT SIZE
1275 mm 900 mm 300 mm
ASU 61
DepthWidthHeight
SHELVING UNIT SIZE
1275 mm 900 mm 300 mm
ASU 62
DepthWidthHeight
SHELVING UNIT SIZE
1275 mm 900 mm 300 mm
ASU 63
DepthWidthHeight
SHELVING UNIT SIZE
1275 mm 900 mm 400 mm
ASU 64
DepthWidthHeight
WidthLength Height WidthLength Height WidthLength Height WidthLength Height
www.alkonbins.com
51
AKP-43 BIN SIZE
400 mm 215 mm 200 mm
ASU 50 Shelving Unit Consists of
1 Set of ASUB 124 Shelving Body
6 Nos. Shelves - Art No.: ASUS 400
4 Nos. AKP-43 Bins on each shelf
Total 20 Nos. AKP-43 Bins
( No Kick Plate in standard unit, If Kick Plate required then their will be 5 Nos.ASUS 400 Shelves & 16 Nos. AKP-43 Bins )
ASU 53 Shelving Unit Consists of
1 Set of ASUB 183 Shelving Body
11 Nos. Shelves - Art No.: ASUS 300
2 Nos. AKP-35 Bins on each shelf
Total 20 Nos. AKP-35 Bins
AKP-35 BIN SIZE
300 mm 435 mm 140 mm
ASU 52 Shelving Unit Consists of
1 Set of ASUB 183 Shelving Body
11 Nos. Shelves - Art No.: ASUS 300
4 Nos. AKP-33 Bins on each shelf
Total 40 Nos. AKP-33 Bins
AKP-33 BIN SIZE
300 mm 215 mm 140 mm
AKP-32 BIN SIZE
300 mm 140 mm 140 mm
ASU 51 Shelving Unit Consists of
1 Set of ASUB 183 Shelving Body
11 Nos. Shelves - Art No.: ASUS 300
6 Nos. AKP-32 Bins on each shelf
Total 60 Nos. AKP-32 Bins
STANDARD COMBINATIONS
ASU 68
SHELVING UNIT SIZE
1875 mm 900 mm 300 mm
DepthWidthHeight
ASU 69
SHELVING UNIT SIZE
1875 mm 900 mm 300 mm
DepthWidthHeight
ASU 70
SHELVING UNIT SIZE
1875 mm 900 mm 300 mm
DepthWidthHeight
SHELVING UNIT SIZE
1275 mm 900 mm 400 mm
ASU 65
DepthWidthHeight
WidthLength Height WidthLength Height WidthLength Height WidthLength Height
www.alkonbins.com
52
ASU 57 Shelving Unit Consists of
1 Set of ASUB 233 Shelving Body
14 Nos. Shelves - Art No.: ASUS 300
4 Nos. AKP-33 Bins on each shelf
Total 52 Nos. AKP-33 Bins
ASU 56 Shelving Unit Consists of
1 Set of ASUB 233 Shelving Body
14 Nos. Shelves - Art No.: ASUS 300
6 Nos. AKP-32 Bins on each shelf
Total 78 Nos. AKP-32 Bins
STANDARD COMBINATIONS
ASU 75
SHELVING UNIT SIZE
2375 mm 900 mm 300 mm
DepthWidthHeight
ASU 76
SHELVING UNIT SIZE
2375 mm 900 mm 300 mm
DepthWidthHeight
AKP-33 BIN SIZE
300 mm 215 mm 140 mm
WidthLength Height
AKP-32 BIN SIZE
300 mm 140 mm 140 mm
WidthLength Height
ASU 55 Shelving Unit Consists of
1 Set of ASUB 184 Shelving Body
8 Nos. Shelves -Art No.: ASUS 400
4 Nos. AKP-43 Bins on each shelf
Total 28 Nos. AKP-43 Bins
ASU 54 Shelving Unit Consists of
1 Set of ASUB 184 Shelving Body
8 Nos. Shelves - Art No.: ASUS 400
6 Nos. AKP-42 Bins on each shelf
Total 42 Nos. AKP-42 Bins
ASU 71
SHELVING UNIT SIZE
1875 mm 900 mm 400 mm
DepthWidthHeight
ASU 72
SHELVING UNIT SIZE
1875 mm 900 mm 400 mm
DepthWidthHeight
AKP-43 BIN SIZE
400 mm 215 mm 200 mm
WidthLength Height
AKP-42 BIN SIZE
400 mm 145 mm 200 mm
WidthLength Height
www.alkonbins.com
53
ASU 59 Shelving Unit Consists of
1 Set of ASUB 234 Shelving Body
10 Nos. Shelves - Art No.: ASUS 400
6 Nos. AKP-42 Bins on each shelf
Total 54 Nos. AKP-42 Bins
ASU 58 Shelving Unit Consists of
1 Set of ASUB 233 Shelving Body
14 Nos. Shelves - Art No.: ASUS 300
2 Nos. AKP-35 Bins on each shelf
Total 26 Nos. AKP-35 Bins
STANDARD COMBINATIONS
ASU 77
SHELVING UNIT SIZE
2375 mm 900 mm 300 mm
DepthWidthHeight
ASU 78
SHELVING UNIT SIZE
2375 mm 900 mm 400 mm
DepthWidthHeight
AKP-42 BIN SIZE
400 mm 145 mm 200 mm
WidthLength Height
AKP-35 BIN SIZE
300 mm 435 mm 140 mm
WidthLength Height
ASU 60 Shelving Unit Consists of
1 Set of ASUB 234 Shelving Body
10 Nos. Shelves - Art No.: ASUS 400
4 Nos. AKP-43 Bins on each shelf
Total 36 Nos. AKP-43 Bins
ASU 79
SHELVING UNIT SIZE
2375 mm 900 mm 400 mm
DepthWidthHeight
AKP-43 BIN SIZE
400 mm 215 mm 200 mm
WidthLength Height
www.alkonbins.com
54
KOALA SHELVING SYSTEM ORDERING CHART WITHOUT DOOR
Back Plate : As per the new design the back plate is a set consisting of 2 pcs.
ASU 61 : No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 36 Nos.
AKP-32 Bins. System UDL 700 Kgs.
ASU 62 : No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 24 Nos.
AKP-33 Bins. System UDL 700 Kgs.
ASU 63 : No Kick Plate in standard unit, If Kick Plate required then their will be 7 Nos. ASUS 300 Shelves & 12 Nos.
AKP-35 Bins. System UDL 700 Kgs.
ASU 64 : No Kick Plate in standard unit, If Kick Plate required then their will be 5 Nos. ASUS 400 Shelves & 24 Nos.
AKP-42 Bins. System UDL 500 Kgs.
ASU 65 : No Kick Plate in standard unit, If Kick Plate required then their will be 5 Nos. ASUS 400 Shelves & 16 Nos.
AKP-43 Bins. System UDL 500 Kgs.
ASU-61 ASUB-123 2 Nos. 1 Set - ASUS 300 8 Nos. AKP-32 42 Nos. 560 Kgs.
ASU-62 ASUB-123 2 Nos. 1 Set - ASUS 300 8 Nos. AKP-33 28 Nos. 560 Kgs.
ASU-63 ASUB-123 2 Nos. 1 Set - ASUS 300 8 Nos. AKP-35 14 Nos. 560 Kgs.
ASU-64 ASUB-124 2 Nos. 1 Set - ASUS 400 6 Nos. AKP-42 30 Nos. 360 Kgs.
ASU-65 ASUB-124 2 Nos. 1 Set - ASUS 400 6 Nos. AKP-43 20 Nos. 360 Kgs.
ASU-68 ASUB-183 2 Nos. 1 Set 1 No ASUS 300 11 Nos. AKP-32 60 Nos. 770 Kgs.
ASU-69 ASUB-183 2 Nos. 1 Set 1 No ASUS 300 11 Nos. AKP-33 40 Nos. 770 Kgs.
ASU-70 ASUB-183 2 Nos. 1 Set 1 No ASUS 300 11 Nos. AKP-35 20 Nos. 770 Kgs.
ASU-71 ASUB-184 2 Nos. 1 Set 1 No ASUS 400 8 Nos. AKP-42 42 Nos. 480 Kgs.
ASU-72 ASUB-184 2 Nos. 1 Set 1 No ASUS 400 8 Nos. AKP-43 28 Nos. 480 Kgs.
ASU-75 ASUB-233 2 Nos. 1 Set 1 No ASUS 300 14 Nos. AKP-32 78 Nos. 980 Kgs.
ASU-76 ASUB-233 2 Nos. 1 Set 1 No ASUS 300 14 Nos. AKP-33 52 Nos. 980 Kgs.
ASU-77 ASUB-233 2 Nos. 1 Set 1 No ASUS 300 14 Nos. AKP-35 26 Nos. 980 Kgs.
ASU-78 ASUB-234 2 Nos. 1 Set 1 No ASUS 400 10 Nos. AKP-42 54 Nos. 400 Kgs.
ASU-79 ASUB-234 2 Nos. 1 Set 1 No ASUS 400 10 Nos. AKP-43 36 Nos. 400 Kgs.
SHELVING BODY SHELVES PANDA SHELF BINS
ART NO. ROLL POST BACK PLATE
KICK PLATE
ART NO. NO. OF SHELVES NO. OF BINSART NO.
SYSTEM UDL
Uniform Distributed LoadART NO.: ASUKP
SHELVING UNIT
ART NO.
www.alkonbins.com
55
KOALA SHELVING SYSTEM ORDERING CHART WITH DOOR
Nesting of KOALA bins
ASU-61 ASUB-123 2 Nos. 1 Set ASUD -1275 ASUS 300 7 Nos. AKP-32 36 Nos. 490 Kgs.
ASU-62 ASUB-123 2 Nos. 1 Set ASUD -1275 ASUS 300 7 Nos. AKP-33 24 Nos. 490 Kgs.
ASU-63 ASUB-123 2 Nos. 1 Set ASUD -1275 ASUS 300 7 Nos. AKP-35 12 Nos. 490 Kgs.
ASU-64 ASUB-124 2 Nos. 1 Set ASUD -1275 ASUS 400 5 Nos. AKP-42 24 Nos. 300 Kgs.
ASU-65 ASUB-124 2 Nos. 1 Set ASUD -1275 ASUS 400 5 Nos. AKP-43 16 Nos. 300 Kgs.
ASU-68 ASUB-183 2 Nos. 1 Set ASUD -1875 ASUS 300 11 Nos. AKP-32 60 Nos. 770 Kgs.
ASU-69 ASUB-183 2 Nos. 1 Set ASUD -1875 ASUS 300 11 Nos. AKP-33 40 Nos. 770 Kgs.
ASU-70 ASUB-183 2 Nos. 1 Set ASUD -1875 ASUS 300 11 Nos. AKP-35 20 Nos. 770 Kgs.
ASU-71 ASUB-184 2 Nos. 1 Set ASUD -1875 ASUS 400 8 Nos. AKP-42 42 Nos. 560 Kgs.
ASU-72 ASUB-184 2 Nos. 1 Set ASUD -1875 ASUS 400 8 Nos. AKP-43 28 Nos. 560 Kgs.
Please note in ASU 61/ 62 / 63 there will be 4 spare holes after assembly as suggested above this can be adjusted by
leaving 1 hole spacing for lower 4 shelves.
Please note in ASU 64 / 65 there will be 6 spare holes after assembly as suggested above this can be adjusted by leaving
2 hole spacing for lower 3 shelves.
Please note as the door set includes 2 lintels, there is no need to use kick plate for panda shelving Systems with door.
Please refer assembly instruction chart for further details.
SHELVING BODY SHELVES PANDA SHELF BINSSHELVING UNIT
ART NO.ART NO. ART NO.
ROLL POST
BACK PLATE
ART NO.NO. OF
SHELVESNO. OF BINSART NO.
SYSTEM UDL
UNIFORM DISTRIBUTED LOAD
DOOR SET
www.alkonbins.com
SUPRA BINS RHINO BINS HIPPO BINS BULL BINS
BINS SIZE COMPARISON CHART
SRNO.
OUTER DIMENSIONS INNER DIMENSIONS EFFECTIVEHEIGHT
STD. PACKLength Width Height Length Width Height
SUPRA BINS
RHINO BINS
HIPPO BINS
BINS ART NO.
1. SB-1 125 100 60 117 80 52 25 60
2. SB-2 170 100 85 157 80 75 40 60
3. SB-3 220 130 125 200 115 115 73 50
4. SB-4 290 178 143 265 155 130 80 10
5. SB-5 290 363 145 265 340 130 83 5
6. SB-6 440 180 145 415 154 130 85 10
7. SB-7 435 425 215 405 380 208 120 6
8. SB-7X 435 400 215 405 360 208 120 6
9. ARTB-05 109 104 49 95 89 43 23 60
10. ARTB-10 136 106 76 125 90 65 28 60
11. ARTB-20 187 106 76 171 90 65 32 40
12. ARTB-25 205 139 126 190 115 121 61 40
13. ARTB-30 274 140 127 256 115 115 56 40
14. ARTB-40 375 210 179 355 170 160 80 10
15. ARTB-50 457 280 255 432 241 240 108 6
16. ARTB-60 375 415 179 355 375 160 80 5
17. 612-T 100 110 53 80 90 43 25 60
18. 612-S 150 110 75 130 90 68 40 60
19. 612-S2 175 115 75 150 90 64 40 40
20. 612-M 250 165 125 225 132 115 67 40
21. 612-DW 250 344 125 210 312 115 67 20
22. 612-B 355 220 150 330 182 138 85 10
23. 612-J 515 330 200 470 295 180 115 8
24. BULL BIN-5 168 102 74 145 86 66 38 60
25. BULL BIN-15 201 125 101 178 105 92 48 40
26. BULL BIN-25 229 150 126 192 128 114 58 50
27. BULL BIN-35 300 208 158 255 185 145 80 20
28. BULL BIN-45 348 210 200 305 187 185 110 10
29. BULL BIN-55 510 310 200 480 280 195 85 8
30. AK-421 400 255 100 365 230 90 90 10
31. AK-422 400 255 200 365 230 190 190 5
BULL BINS
TOTEBINS
56
EN W
www.alkonbins.com
57
PANDA SHELF BINS KOALA PICK BINS
BINS SIZE COMPARISON CHART
Colours for Bins : RED BLUE GREY GREEN YELLOW
For SB-7, ARTB-50, ARTB-60, 612-J, AK-421, AK-422, BULL BIN-55 only Red & Blue colours. For Grey, Green & Yellow colours minimum order Qty. 500 pcs. per colour on special request only.
For Panda Shelf Bins & Koala Pick Bins only Blue colour.
EFFECTIVEHEIGHT
STD.PACK
OUTER DIMENSIONS
Length Width HeightBINS ART NO.
32. PSB-301 315 100 60 293 86 55 55 24
33. PSB-302 315 100 110 293 86 105 105 24
34. PSB-303 315 150 110 293 136 105 105 12
35. PSB-304 315 220 135 293 210 130 130 12
36. PSB-305 315 300 135 293 282 130 130 6
37. PSB-401 415 100 60 393 86 55 55 24
38. PSB-402 415 100 110 393 86 105 105 24
39. PSB-403 415 150 110 393 136 105 105 12
40. PSB-404 415 220 135 393 210 130 130 12
41. PSB-405 415 300 135 393 282 130 130 6
42. PSB-501 515 100 60 493 86 55 55 24
43. PSB-502 515 100 110 493 86 105 105 24
44. PSB-503 515 150 110 493 136 105 105 12
45. PSB-504 515 220 135 493 210 130 130 12
46. PSB-505 515 300 135 493 282 130 130 6
47. PSB-601 615 100 60 593 86 55 55 24
48. PSB-602 615 100 110 593 86 105 105 12
49. PSB-603 615 150 110 593 136 105 105 12
50. PSB-604 615 220 135 593 210 130 130 12
51. PSB-605 615 300 135 593 282 130 130 6
52. AKP-01 130 105 60 105 90 55 26 64
53. AKP-11 180 105 90 155 90 85 42 52
54. AKP-22 220 140 140 195 125 135 65 24
55. AKP-32 300 140 140 270 125 135 65 24
56. AKP-33 300 215 140 270 200 135 65 16
57. AKP-35 300 435 140 270 410 135 65 8
58. AKP-42 400 145 200 360 125 195 95 21
59. AKP-43 400 215 200 360 200 195 95 14
INNER DIMENSIONS
Length Width Height
SRNO.
All dimensions in mm Approx
PANDASHELF BINS
KOALA PICKBINS
Ma y Mon
re
Co eTo
m
TOTE BINS
Please note: colors shown here are similar, not exact, to actual product colors.
Available from July 2013
EN W
NEW
EN W
EN W
EN W
www.alkonbins.com
KOALA SHELVING SYSTEM ORDERING CHART WITHOUT DOORBINS PER LOUVRE / SINGLE OR DOUBLE SIDED ARSS STANDS
ART NO.
LP-1
LOUVRE PANEL
SB-1 24 32 48 96 15 135 30 270
SB-2 16 20 32 64 12 108 24 216
SB-3 9 12 18 36 9 63 18 126
SB-4 6 8 12 24 14 35 28 70
SB-5 3 4 6 12 14 14 28 28
SB-6 6 8 12 24 14 35 28 70
ARTB-05 24 32 48 96 15 120 30 240
ARTB-10 16 20 32 64 12 96 24 192
ARTB-20 16 20 32 64 12 96 24 192
ARTB-25 9 12 18 36 8 48 16 96
ARTB-30 9 12 18 36 8 48 16 96
ARTB-40 4 6 8 18 12 24 24 48
ARTB-60 2 3 4 9 12 12 24 24
612-T 24 32 48 96 15 120 30 240
612-S 16 20 32 64 13 104 26 208
612-S2 16 20 32 64 13 104 26 208
612-M 6 8 12 24 9 45 18 90
612-DW 3 4 6 12 9 18 18 36
612-B 4 6 10 20 14 28 28 56
BULL BIN-5 16 20 32 64 12 108 24 216
BULL BIN-15 12 15 24 48 10 70 20 140
BULL BIN-25 9 12 18 36 9 54 18 108
BULL BIN-35 4 6 10 20 14 28 28 56
BULL BIN-45 4 6 8 16 10 20 20 40
AKP-01 24 32 48 96 15 120 30 240
AKP-11 16 20 32 64 12 96 24 192
AKP-22 9 12 18 36 16 48 32 96
AKP-32 9 12 18 36 16 48 32 96
AKP-33 6 8 12 24 16 32 32 64
AKP-35 3 4 6 12 16 16 32 32
LP-3 LP-6LP-2 RAIL RAIL BINBIN
ARSS STANDS
SINGLE SIDED DOUBLE SIDED
58 www.alkonbins.com
59
Made from High Impact Polystyrene, these drawer containers are ideal for storing hardware and standard parts inside drawers of tool cabinets
C-75
A-75
C-45
B-45B-75
A-45
These drawer containers are available in 6 sizes.
These drawer containers when positioned, inside the standard tool cabinet drawers
make easy and well defined compartments for each type of part stored in them.
These drawer containers being modular help in organizing the drawers of tool
cabinets to store different parts very easy.
Each Container has a label holder which permit the insertion of labels for
easy part identification.
These containers are individually removable if required in the drawer.
These containers are available in blue colour only.
Container Dimensions
DRAWER CONTAINERS
Art No. Outside Dimensions in mm Inside Dimensions in mm
Length Width Height Length Width Height
A-45 150 150 45 144 144 42
B-45 150 75 45 144 70 42
C-45 75 75 45 70 70 42
A-75 150 150 75 144 144 72
B-75 150 75 75 144 70 72
C-75 75 75 75 70 70 72
Different combination of containers in use.
Drawer containers Used in tool cabinetswww.alkonbins.com
re
woP eltrTu
High
Visibility
Pallet
Rack
Upright
Protector
Design Philosophy
VISIPRO Upright Protector design cues have been drawn from the requirements of FEM 10.2.02
regarding impact loads and protection for pallet racking.
FEM 10.2.02 draws the distinction between protection for uprights at the end of racks between cross aisles and gangway intersections which require protection from any direction, compared with intermediate uprights that require protection in a direction normal to the aisle.
We recommend using an independent steel guard for end of racks and the VISIPRO High Visibility Upright Protector for intermediate uprights.
FEM 10.2.02 is very specific about designing intermediate protectors for forces normal to the aisle, to ensure that the protectors do not reduce the clear entry of the bay.
Protectors easily modified on site to fit around bottom beams
VISIPRO does not protrude into the safe working clearances of the storage bay.
Use an independent steel guard for ends of racks and intersecting gangways
Double-stacked Protectors foreven greater visibility andprotection
ART NO. DESCRIPTION STD. PACK
AVA VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 70mm To 83mm width
AVB VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 79mm To 92mm width
AVC VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 93mm To 106mm width
AVD VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 104mm To 117mm width
AVE VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 116mm To 127mm width
AVF VISIPRO Rack Upright Protector Yellow 24
For Rack Uprights from 129mm To 142mm width
COLOURS
AVA / AVB AVB / AVB AVC /AVD AVC /AVD AVC /AVDAVC /AVDAVC /AVDAVA / AVB
ART NO.: AVR-800 COLOURS : BLACK SIZE : 800mm Length X 17mm Width STD. PACK : 50
ART NO.: AVR-1000 COLOURS : BLACK SIZE : 1000mm Length X 17mm Width STD. PACK : 50
VISIPRO VELCRO STRAP
VISIPRO RACK PROTECTOR
VISIPRO CLIPS
60
VISIPRO CLIP38mm Center
BLUE
50
VISIPRO CLIP32mm Center
RED
50
VISIPRO CLIP46mm Center
BLACK
50
VISIPRO CLIP47mm Center
RED
50
VISIPRO CLIP53mm Center
BLUE
50
VISIPRO CLIP60mm Center
BLACK
50
VISIPRO CLIP66mm Center
GREEN
50
VISIPRO CLIP71mm Center
ORANGE
50
NEW
Description
Colours
Std. Pack
For VisiproArt No.
ART NO.
www.alkonbins.com
61
AVE AVE AVF AVF AVF
Features BenefitsTough, impact resistant, rounded outer shell. Deflects impact away from upright.
Fluorescent yellow colour. High visibility promotes safer operating areas.
Resilient inner shock absorbing pad. Spreads and absorbs impact load.
Unique fast snap clips. Fast and simple snap on installation.
Flexible and strong. Sizes to fit most major pallet racking systems.
Easily removable. Quick and easy visual rack inspection.
500mm high standard height. Protection where you need it most.
Can be double stacked for 1,000mm high protection. Even greater visibility and upright protection.
Flexible side wings. To protect side of upright.
Side wings can be cut out on site. Modify to fit around bottom beam applications.
No requirement to fix to floor. Easy and inexpensive to install. Reduces floor damage.
Outer shell and absorbing pad stable down to -30°C. Can be used safely and effectively in a cold store.
Alternative fixing method using velcro straps. Use where the snap clip may not be the ideal fixing.
Tested to FEM 10.2.02 for impact normal to aisle. Known impact load absorption capability.
Five widths of protector ( Type A, B, C, D & E ) Protector sizes to suit all rack types.
Worldwide patents pending. Your guarantee of innovation.
Inexpensive. Affordable protection for the racking asset.
Slim-line design. Does not protrude into the safe working clearances
of the storage bay.
VISIPRO RACK PROTECTOR
Installing VISIPRO to upright
1. Check that clipprong centresmatch with uprighthole centres.Use optionalvelcro straps ifrequired.
4. The protector canalso be fitted to uprightsusing optional Velcrostraps.
2. Fit clips to protectorand present protectorto face of upright.With most uprights,use two clips, one atthe bottom and one atthe top.When protector is inposition with clips inupright, push down toengage clips in holes.
DESIGN REGISTRATION NO. 235224
WORLDWIDE PATENT PENDING
To remove, liftprotector up around10mm so clipsdisengage from holesand pull protector offrack. This will alloweasy inspection of rackif it is subjected toimpact.
3.
AVZ 85 AVZ 91 AVZ 96
ART NO.
Description
Colours
Std. Pack
For VisiproArt No.
VISIPRO CLIP77mm Center
RED
50
VISIPRO CLIP82mm Center
BLUE
50
VISIPRO CLIP91mm Center
BLUE
50
VISIPRO CLIP96mm Center
BLACK
50
VISIPRO CLIP85mm Center
RED
50
www.alkonbins.com
62
POLY BINS & RAILS
ORGANIZE Small Parts, SCREWS, NUTS & MORE !
Bins fitted on rails
Set of 20 Bins & 5 Rails.
5 Nos of Rails for wall Mounting.
20 Nos. of Bins can be stacked or mounted on Rails.
Size of each POLY BIN 100mm x 75mm x 125 mm
Art No.: PBR-205
451 hanging holes with 38 strong hooks of 2 sizes & 38 plastic locks.
Extendable when necessary.
For samples & other Displays.
For retail outlets, offices, homes etc.
Made of top quality plastic material.
Red Blue Grey
Colours :
MULTY DISPLAY BOARD
Art No.: MDB-500
Size : 505 x 390mm
Please note: colors shown here are similar, not exact, to actual product colors.
www.alkonbins.com
63
TOOL TRAY
Art No.: ATT
Art No. ACO 25
COMPONENT ORGANISERS
TOOL TRAY
COMPONENT ORGANISERS
Multi Purpose Tool Tray
For Screwdrivers, Files, Pliers, Spanners etc.
Can be Screwed in walls, Workstations etc.
Can be used on Louvre Panels
Red Blue Grey
Colours :
Ideal for storing electronic parts, hardware etc. Suitable for homes workshops and factories. Comes with clear see through plastic drawers for easy visibility of contents
Art No.: ACO 25 with 25 Drawers
Cabinet Size:400mm x 250mm x 160mm
Size of drawers:150mm x 75mm x 35mm.
Art No.: ATT
Please note:colors shown here are similar, not exact, to actual product colors.
www.alkonbins.com
64Slotted angle foot plate
ALFP 8040L (Left) ALFP 8040R (Right)
ATFP 6040 ALFP 6060 ALFP 4040
ATFP 8040ALFP 6040R (Right)ALFP 6040L (Left)
SLOTTED ANGLE FOOT PLATE
Slotted Angle Foot Plates are made from
polypropylene copolymer.
These sizes suit the standard slotted angles available
in the market.
Standard colour available is BLACK.
Art No. DISCRIPTIONSTD. PACK
ATFP 6040 ‘T’ Foot Plate 60 mm x 40 mm 500
ALFP 6060 ‘L’ Foot Plate 60 mm x 60 mm 500
ALFP 4040 ‘L’ Foot Plate 40 mm x 40 mm 500
ALFP 6040L (Left) ‘L’ Foot Plate 60 mm x 40 mm 500
ALFP 6040R (Right) ‘L’ Foot Plate 60 mm x 40 mm 500
ATFP 8040 ‘T’ Foot Plate 80 mm x 40 mm 500
ALFP 8040L (Left) ‘L’ Foot Plate 80 mm x 40 mm 500
ALFP 8040R (Right) ‘L’ Foot Plate 80 mm x 40 mm 500
Slotted angle foot plate
www.alkonbins.com
MATERIAL HANDLING - ESD - OFFICE PRODUCTS
& ti yvit ucd Oprop t migins izia ner gcnI S pace
ALKON PLASTICS PVT. LTD.
Dgn.
& P
rint B
y Av
i’s C
reat
ions
: 98
205
8766
1
This Catalog should not be reproduced as it is covered under Copyright Act.
STOCKIST
e s gtora sl e otia ulrs tieV on s for all needs
CAT- 2013
www.alkonbins.com
