2
PLATFORM SOLUTIONS GROUP Features : • Supports two Intel® Xeon® Processors E5-2600/E5-2600 v2 Product Family • 16 x memory sockets support LR/U/R-DIMMs, delivering up to 512 GB memory capacity • Rear access power supply alarm reset • 6 x PCIe 3.0 slots • Onboard flash boot support includes eUSB SSD and SATA DOM • Intel® Trusted Platform Module (Intel®TPM) header for Intel® Trusted Execution Technology (Intel®TXT) support SPECIFICATIONS Video Support Integrated Matrox G200 2D Graphics controller LAN 2 x Gigabit network through Intel® I350 10/100/1000 Mb integrated MAC and PHY controller Server Management ▪ Onboard Server Engines* LLC Pilot III* Controller ▪ Support for Intel® Remote Management Module 4 solutions ▪ Intel® Light-Guided Diagnostics on field replaceable units ▪ Support for Intel® System Management Software ▪ Support for Intel® Intelligent Power Node Manager (Need PMBus - compliant power supply) BIOS Flash Winbond W25Q64BV Rear Panel I/O • 1 x DB-15 video connector • 1 x DB-9 serial port A connection • Supports 2 x 10/100/1000Mb NIC • 4 x USB2.0 ports Indicators • Diagnostics LED • ID LED • System status LED Power Supply 1100W AC 1+1 high-efficiency redundant PSU 80+ Gold System Cooling Middle : 3 x 120x38mm easy swap fans Environmental Specifications Temperature : -10ºC(14ºF) ~ 60ºC(140ºF) for storage, 0ºC(32ºF) ~ 35ºC(95ºF) for operating Humidity: 5%~95% non-condensing Gross Weight (w/ PSU & Rail) kgs : 35 lbs : 77 Packaging Dimensions (W x D x H) mm : 610 x 920 x 380 inches : 24 x 36.2 x 15 Mounting Standard 28” tool-less slide rail Dimensions (W x D x H) (with chassis ears) mm : 483 x 679 x 173.5 inches : 19 x 26.7 x 7 Motherboard Intel® Server Board S2600CP2 Processor • Support for two Intel® Xeon® E5-2600/E5-2600 v2 Processors • Socket R (FCLGA2011) • Thermal Design Power up to 135-W Chipset Support Intel® C602 Chipset System Memory • 8 memory channels (4 channels for each processor socket) • Channels A, B, C, D, E, F, G, and H • Support for 800/1066/1333/1600/1866 MHz/s Registered DDR3 Memory (RDIMM), Unbuffered DDR3 memory (UDIMM) and Load Reduced DDR3 memory (LRDIMM). • DDR3 standard I/O voltage of 1.5V & DDR3 Low Voltage of 1.35V Front Panel Power on/off and system reset LEDs Power, 2 x LAN and Drive Drive Bays External 3.5" hot swap 24 2.5" hot swap 2 Backplanes Options 6 x 4-port 6Gb SAS backplanes with single SFF-8087 connector on each 1 x 24-port 6Gb SAS backplane with 36-PHY expander and 3 SFF-8087 connectors Expansion Slots PCIe 3.0 6 x8 RAID Support ▪ Intel® RSTe SW RAID 0/1/10/5 ▪ LSI® SW RAID 0/1/10 Internal I/O Connectors / Headers ▪ 1 x 2x5 pin connector providing front panel support for 2 x USB ports ▪ 1 x internal Type A USB2.0 port ▪ 1 x internal USB port to support low profile eUSB SSD ▪ 1 x DH-10 serial Port B connector ▪ 1 x 1x7pin header for optional Intel® Local Control Panel support SB401-CP2 Storage Server Barebone ®
