+ All Categories
Home > Documents > Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Date post: 20-Jan-2016
Category:
Upload: stephen-beasley
View: 224 times
Download: 0 times
Share this document with a friend
Popular Tags:
35
Stormwater Control & Stormwater Control & Design Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL
Transcript
Page 1: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Stormwater Control & Stormwater Control & DesignDesign

By Ken Barber, CPESC

INSPECTION SERVICES

PROFESSIONAL

Page 2: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Certified Professional in Erosion and Sediment Control

Definition A Certified Professional in Erosion

and Sediment Control has educational training, demonstrated expertise, and experience in controlling erosion and sedimentation and that meet qualification standards.

Page 3: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Eligibility Requirements

Earn a BS degree or higher plus three (3) years of professional level experience in the soil erosion and sediment control profession - college transcripts are required.

Pass Written Exam www.cpesc.net

Page 4: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Stormwater Control

Background Application

Page 5: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Water Quality Act

Passed in 1987 Amended the Clean Water Act Federal Regulation of Pollutant

Discharge during Runoff Events

Page 6: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

National Pollutant Discharge Elimination System (NPDES)

Phase I Stormwater Regulations were Published by EPA in 1990

Mandated that states set a system for regulation by 1994

The New York State Department of Environmental Conservation is local NPDES permitting authority.

Page 7: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

State Pollutant Discharge Elimination System (SPDES)

Published Two Permits in 1993 One for Industrial Site Runoff One for Construction Site Runoff

for sites of 5+ Acres

Permits Regulated the manner in which Stormwater can leave a site

Page 8: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Phase II Regulations

Established in 1999 by the EPA Effective as of March 10, 2003 Lowered the Threshold to One Acre

of Disturbance Regulations published in New York

in SPDES General Permit GP-02-01 Effective in January of 2003

Page 9: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Project Evaluation:

Page 10: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Stormwater Pollution Prevention Plan (SWPPP)

Erosion and Sediment Control During Construction

Water Quality Control Water Quantity Control Maintenance, during and after

Page 11: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Water Quality & Quantity Design

Maintain Pre-Development Conditions

Page 12: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

The The “Blue Book”“Blue Book”

www.dec.state.ny.us

Page 13: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Responsibility of the Design Professional

Engineers typically handle SPDES permitting

Must educate the Operator and Contractors as to their responsibilities

Both are Mandated to sign SWPPP

Page 14: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

GP-02-01GP-02-01 Violations Violations Surface Run-off Turbid Discharge Adjacent Roadway Contamination Dust Pollution

Page 15: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Primary Means of Education

Detailing Inspection

Page 16: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Detailing:

Page 17: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Limited EffectivenessLimited Effectiveness

Page 18: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Roadway ContaminationRoadway Contamination

Page 19: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Proper Installation Adjacent ToProper Installation Adjacent To RoadwayRoadway

Page 20: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Erosion Control Erosion Control MattingMatting

Page 21: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 22: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Proper Construction & Proper Construction & Maintenance Prevent Maintenance Prevent ContaminationContamination

Page 23: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Lack of Maintenance Creates Lack of Maintenance Creates WorkWork

Page 24: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 25: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 26: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 27: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 28: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.
Page 29: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Inspection

GP-02-01 Mandates site be inspected by “qualified professional”

Every 7 calendar days After every 0.5” rainfall in a 24

hour period

Page 30: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Inspection Reporting Reports & Sketches generated for

each inspection Monthly Summaries are posted for

public viewing Quarterly Summaries are also

posted

All made available to NYSDEC upon request

Page 31: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Inspection Reports

Page 32: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Detailed Sketches

Page 33: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Work as a Team

Inspections are an excellent opportunity to plan with the Contractor

Contractor may have methods or ideas that are new to you

Remember: The goal is containment

Page 34: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Growing Pains

Non-Uniform Design Non-Uniform Enforcement

Page 35: Stormwater Control & Design By Ken Barber, CPESC INSPECTION SERVICES PROFESSIONAL.

Questions?

INSPECTION SERVICES

PROFESSIONAL


Recommended