| Façade | Façade renders | Finishing renders | StoSuperlit The robust acrylic render for a natural stone appearance The StoSuperlit collection of renders offers 25 different colours, guaranteeing an individual look for natural stone finishes on façades. With its broad spectrum of applications, e.g. as a colour highlight in entrance areas, on parapets or balconies, or as a classic touch of colour in the plinth area, this hard-wearing natural stone render can provide an ideal finish. • Highly resistant to mechanical stress • Maximum resistance to dirt or scuff marks • Weather-resistant • 25 colours available • Sto-Superlit Protect transparent sealing is available as an option
Transcript
| Façade | Façade renders | Finishing renders |
StoSuperlitThe robust acrylic render for a natural stone appearance
The StoSuperlit collection of renders offers 25 different colours, guaranteeing an individual look for natural stone finishes on façades. With its broad spectrum of applications, e.g. as a colour highlight in entrance areas, on parapets or balconies, or as a classic touch of colour in the plinth area, this hard-wearing natural stone render can provide an ideal finish.
• Highly resistant to mechanical stress
• Maximum resistance to dirt or scuff marks
• Weather-resistant
• 25 colours available
• Sto-Superlit Protect transparent sealing is available as an
option
Art
.-n
o. 2
009-
0172
en
rev.
-no
. 03/
10.1
6 P
rin
ted
in U
.K.
828 7
834 17
833 16
412 63
415 22
827 15
404 46
842 12
416 43
836 21
800 68 818 42 821 54820 44
829 13 832 11
403 21 413 24409 43
841 9
405 13
831 24
414 43
411 35
824 41
StoSuperlitFor hard-wearing natural stone highlights on the façade
StoSuperlit K 2.0 colour collection
= Lightness value in %Differences between the depicted colours and the actual colours are unavoidable for technical reasons relating to the printing process. The illustrations shown are not binding.Minimal colour differences in the render may result from variations in the material, the texture or substrate concerned or the drying time.
The specific technical specifications and information on the products in the technical data sheets and approvals must be observed.
