Click here to load reader
Date post: | 21-Oct-2014 |
Category: |
Technology |
View: | 169 times |
Download: | 2 times |
Click here to load reader
The assembly guideline for charcoal stoves
Presentation of pieces
Presentation of pieces : Part 1
The two symetrics sides with handles
The front (Up part)
The front (Bottom part)
Bottom partBack part
12
3
45
Presentation of pieces : Part 2
The …? The …? The …?
Ceramic wool for front
Ceramic wool The…?
67 8
9
10
11
Presentation of pieces
The doors!
12
13 Prakti Design sign
The tools you need
The tools you need
Rivet gun
17
16
15
14
Rivet
Screw
The key screw ?
How to assembly a charcoal stove step
by step
Step 1 : Sides and front
Put in place the two sides ( ) : handles must be on the outside
Take the front part ( up part ) , the raised edge directed to the bottom and the holes in front of those of the two sides
1
2
Step 1 : Sides and front
Step 1 : Sides and front
Put 4 rivets in the 4 holes ( ) : the long part of the rivet must be directed towards you
Take rivet gun( ) to fix the rivets
15
14
Step 1 : Sides and front
As you have done previously for the up part, put 4 rivets in the 4 holes ( ) and use the rivet gun to fix it
15
Put in place the second piece of the front( the bottom part )3
Step 2 : The back
Turn it to have the back in front of you. Take the back part ( ) and put it in place4
Be careful, this .?. Must be directed to the top of the stove.
Step 2 : The back
Then you can fix the rivets in the holes as you have previously done
Step 3 : The bottomTo fix the bottom part, first turn the stoves to have the handles low.
Take the bottom part ( ) and put it in place.
Then, fix it with rivets.
5
Step 4 : The combustion chamber
Take the ..?. ( )
Put it in place inside the stove : the rounded side must be in front of the back side
6
Be careful to the two holes are facing…..? Then put a screw ( ) into
the hole and fix it with the key ( )
16
17
Step 4 : The combustion chamber
Take the ..?.. ( )and put it in place : the side with round print must be turn to the top like in the photo
7
Step 4 : The combustion chamber
Step 4 : The combustion chamber
Take the ..?.. ( )and put it down8
Step 5 : Isolation
Take the big part of ceramic wool ( )and set it up around the combustion chamber.
Then take the little part of ceramic wool ( ) )And put it in place in the front of the stove
9
10
Step 6 : The …?
Take the ..?.. ( )and put it in place.
Put 4 screw into the holes and use the key to fix it.
11
Step 7 : The doors of the combustion chamber
Put the doors ( ) in the sliding.
Fix it with the rivet gun.
12
Step 8 : The Prakti design sign
Fix th Prakti Sign ( ) in the sliding13
The charcoal stove is ready to use!