Date post: | 12-Apr-2017 |
Category: |
Documents |
Upload: | fordlovers |
View: | 202 times |
Download: | 7 times |
®
Stow-A-Ball Gooseneck
Installation Diagrams
June 2010
www.vtowing.com06/16/2010
NOTE TO INSTALLERS
This installation manual has been provided to you as an aid to help you install the Valley Stow-A-Ball gooseneck hitches. Much of the data presented was gathered as feedback from successful installers. We very much appreciate your help.
With this manual we are not trying to imply that these are the only acceptable installation positions or methods but, again, offer them as an aid to speed and ease installation. This is a living document in that it is continually being updated with new installations and tips. We continue to solicit your help and accept any feedback that you have to offer. Again, we appreciate all of the advice that you have given.
Thank you for your business.
Chris FudalaVice President of Engineering
Towing Position
Stowed Position
Gooseneck Head rated at 30,000 lbs. GTW, 7,500 lbs. TW
STRONG
Rated to tow 30,000 lbs. Valley’s new Stow-a-ball® Gooseneck Hitch provides maximum towing capacity for your Gooseneck towing needs. Our Stow-A-Ball® design allows easy storage of the trailer ball when not in use, creating an open truck bed for maximum versatility.
SAFEValley Industries continues to raise the bar on product testing. Valley’s in-house testing exceeds industry standards to provide added safety for you and your valuable cargo. Our Gooseneck’s meet SAE J2638 Rev. E test requirements for a 30,000 lb. rating.
SIMPLEValley’s Engineering team has developed our Stow-A-Ball® Gooseneck with a single bolt action pull rod. Fewer moving parts mean fewer parts that can become damaged or fatigued.
FEATURES• Trailer Ball – 30,000 lb. 2-5/16” zinc plated with yellow chromate for superior corrosion resistance.
• Ball rotates freely in socket to help eliminate binding and wear on the coupler or ball.
• Ball storage provides simple easy-to-use storage for the ball when not in use (no special covers are required to keep dirt out of the hole.)
• Vehicle specific mounting kits are engineered to handle the maximum tow rating for each vehicle and provide optimum ball positioning for safe towing.
• Most installation kits do not require the truck bed to be lifted, kits bolt or clamp to the truck frame and use existing holes whenever possible to minimize drilling.
• Safety chain hooks mount with tension springs to eliminate unwanted rattling. Mounting options allow the hooks to be mounted in the lower corrugation of the truck bed.
STOW-A-BALL® GOOSENECK HITCH FEATURES AND BENEFITS
INDEXStow-A-Ball Mounting System
MAKE APPLICATION INSTALL BALL PAGE KIT PLATFORM 2007-10 (New Body) 2500 & 3500 HD, 6-1/2’ & 8’ bed, 2 & 4wd 2001-07 Classic 2500 & 3500 HD, 6-1/2’ & 8’ bed, 2 & 4wd 1999-06 Classic 1500 LD, 6-1/2’ & 8’ bed, 2 & 4wd 1988-98 1500 C/K P/U (Old Body Style), 6-1/2’ & 8’ bed, 2 & 4wd 1988-00 2500 & 3500 C/K P/U (Old Body Style), 6-1/2’ & 8’ bed, 2 & 4wd 2003-10 2500 & 3500 HD P/U (Includes Megacab), 6-1/2’ & 8’ bed 2 & 4wd 2003-10 2500 & 3500 HD P/U (No Megacab), 6-1/2’ & 8’ bed 2 & 4wd 1994-02 2500 & 3500 P/U 6-1/2’ & 8’ bed 2 & 4wd 1994-01 1500 P/U, 6-1/2’ & 8’ bed 2 & 4wd 2002-05 1500 P/U, 6-1/2’ & 8’ bed 2 & 4wd 2008-11 F250, F350, & F450 SD P/U, 6-1/2’ & 8’ bed, 2 & 4wd, ** **** 1999-07 F250 & F350 SD P/U, 6-1/2’ & 8’ bed, 2 & 4wd (No Drill)*** 1973-98 F250 & F350 HD P/U, 6-1/2’ & 8’ bed, 2 & 4wd 1973-96 F150 & F250 P/U (excl. w/air level system), 6-1/2’ & 8’ bed, 2 & 4wd 2004-10 F150 P/U (New Body), 6-1/2’ & 8’ bed. 2 & 4wd 1997-04 F150 Heritage P/U (Old Body Style), 6-1/2’ & 8’ bed, 2 & 4wd
** No Exhaust modification required*** 05-07 models exhaust lowering brackets included (08-10 require drilling)
**** Must lift pickup bed
Chevy/GMC
6985469644
1
69855 2
69581 69663 3
Dodge
69541 69791 469553
69663
5
69601 6
69554 7
Ford
69613
69612
6956169621
69791
69663
8
9
1011
Page 1
2000-07 CLASSIC CHEVROLET/GMC 2500 & 3500 HD P/U2007-10 (NEW BODY) 2500 & 3500 HD P/U
(W/ INTEGRATED ELECTRONIC BRAKE CONTROL)ALL CABS
6-1/2’ & 8’ BED
69854 INSTALL KIT
FOR:VALLEY 69644 STOW A BALL GOOSENECK BALL PLATFORM
Front of Truck
Page 2
1999-07 CLASSIC CHEVROLET/GMC 1500 LD P/UALL CABS
6-1/2’ & 8’ BED
69855 INSTALL KIT
FOR:VALLEY 69644 STOW A BALL GOOSENECK BALL PLATFORM
Page 3
1988-98 CHEVROLET/GMC 1500 C/K P/U1988-00 CHEVROLET/GMC 2500 & 3500 C/K P/U
ALL CABS OLD BODY STYLE6-1/2’ & 8’ BED
69581 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
Page 4
2003-10 DODGE 2500 & 3500 HD P/U (INCLUDES MEGACAB)ALL CABS
6-1/4’ & 8’ BED
69541 INSTALL KIT
FOR:VALLEY 69791 STOW A BALL GOOSENECK BALL PLATFORM
Page 5
2003-10 DODGE RAM 2500 & 3500 HD P/U (NO MEGACAB)ALL CABS
6-1/2’ & 8’ BED
69553 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
Page 6
1994-01 DODGE RAM 1500 P/U1994-02 DODGE RAM 2500, 3500 P/U
ALL CABS6-1/2’ & 8’ BED
69601 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
Page 7
2002-05 DODGE RAM 1500 P/UALL CABS
6-1/2’ & 8’ BED
69554 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
Page 8
2008-11 F250, F350 & F450 SD P/UREQUIRES 2 HOLES DRILLED, LOWER THE EXHAUST
ALL CABS6-1/2’ & 8’ BED
69613 INSTALL KIT (No Drill, Exhaust Modifications, Must Raise Bed)
FOR:VALLEY 69791 STOW A BALL GOOSENECK BALL PLATFORM
Page 9
1973-96 F150 & F250 LD P/U1973-98 F250 & F350 HD P/U
1999-07 F250 & F350 SD P/U (NO DRILL)ALL CABS
6-1/2’ & 8’ BED
69612 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
(1973-96 F150 & F250 LD P/U - WILL PLACE HANDLE ON PASSENGER SIDE OF TRUCK)
Front of Truck
2004-10 FORD F150 P/U (NEW BODY STYLE)ALL CABS
6-1/2’ & 8’ BED
69561 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
Page 10
1997-04 F150 HERITAGE P/U (OLD BODY STYLE)ALL CABS
6-1/2’ & 8’ BED
69621 INSTALL KIT
FOR:VALLEY 69663 STOW A BALL GOOSENECK BALL PLATFORM
(WILL PLACE HANDLE ON PASSENGER SIDE OF TRUCK)
Page 11