1
Polyjet Process Available Materials Stratasys Objet30 Pro (Polyjet Method) 3D Combi-HT Research Group Department of Polymer Science The University of Akron E-mail: [email protected] PolyJet prints photopolymer materials in microscopic layers from heads onto a build tray and instantly cures them with UV light. Notes Each photopolymer layer is cured by ultraviolet light immediately as it is printed, producing fully cured models without post-curing. A gel-like support material designed to uphold overhangs and easily removed with a WaterJet or soluble for automated post-processing. Object30 Pro Stratasys Objet30 Pro Objet Studio Software -- Job Manager -- Tray Settings Model Materials Support Materials Ø WaterJet Removable: the main component, Poly(oxy-1,2-ethanediyl), 1, 2-Propylene glycol, Glycerin, Phosphine oxide and acrylic acid ester. Ø Soluble: the main component, 1,2-Propylene glycol, Polyethylene glyco l, Acrylic monomer, Methanone Ø Rigid Opaque: Excellent detail visualization in gray, black, white and blu e. The main component: acrylate monomer, diacrylate, acetate and pig ment Ø Transparent: Rigid, nearly colorless material featuring proven dimension al stability for general purpose, fine-detail model building and visual sim ulation transparent thermoplastic such as PMMA. The main component: acrylate monomer and dimethanol diacrylate. Ø Simulated Polypropylene: Simulated Polypropylene material is tough, fle xible and durable. It enables you to 3D print precision prototypes that lo ok and behave like polypropylene. The main component: acrylate and acrylic monomer, polyoxyethylene tri acrylate, phosphine oxide, acrylic acid ester. Ø High Temperature: High Temperature heat-resistant material simulates t he thermal performance of standard plastics and is ideal for thermal test ing of static parts. The main component: acrylate oligomer, diacrylate, acrylate monomer, titanium dioxide and acetate. Specifications System Size and Weight 82.6 x 60 x 62 cm (32.5 x 23.6 x 24.4 in.); 106 kg (234 lbs.) Maximum Build Size (XYZ) 294 x 192 x 148.6 mm (11.57 x 7.55 x 5.85 in.) Resolution X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 900 dpi Accuracy 0.1 mm (0.0039 in.) varies depending on part geometry, size, orien tation, material and post-processing method Minimum Layer Thickness 28 microns (0.0011 in.) 16 microns for transparent material (.0006 in.) Build Modes High quality: 16-micron (.0006 in.) resolution High speed: 30-micron (.001 in.) resolution
