Safety for every application
Assembly at wind turbine manufacturers must be high-
ly effective and efficient and the employed sequences
must be uncomplicated and fast. For this purpose,
compact, preadjusted components are used as far
as possible which can be assembled quickly and
easily.
Stromag gear-type limit switches are espe-
cially designed to meet these requirements.
These mechanical switches for reliable travel
limitation and highly precise position feed-
back systems for exacting position control
of the blades or nacelle are integrated in
one housing. Supplying pre-adjusted
components ensures that mechanical as-
sembly is reduced to a few screws and
electrical connection is quick and uses
easy identification for plug connection.
The mechanical mounting options and
electrical connections are developed
and optimised in close co-operation
with the design departments of wind
turbine manufacturers.
Limit switches for PITCH and YAWdrives in wind
turbines
Safe - precise - reliable
Stromagsafety in motion
For decades, the Stromag-Group has been a sought-af-
ter partner in the mechanical drive engineering sector. At-
tractive, tailor-made and cost-effective solutions combined
with products of a high standard of quality guarantee op-
timum customer benefits.
Stromag has been producing gear-type and spindle-
operated limit switches for over 50 years and has been
active in this market globally since the introduction of
wind power technology.
With a wide range of different types of gear sys-
tems, switching contacts and metal and plastic
housings, Stromag offers customised solu-
tions for every application and is an indis-
pensable partner for gear-type limit swit-
ches in the wind turbine market.
The various combinations of gear-
type limit switches with analogue or
digital position feedback systems
are integrated into flexible housing
constructions for precise operation
of PITCH and YAW drives.
safe
precise
reliable
2331
0
Stromag AGHansastraße 12059425 UnnaTel.: +49 2303 102-0Fax: +49 2303 [email protected]
Stromag Dessau GmbHDipl.-Ing. Dirk FahlbuschDessauer Straße 10, 06844 DessauTel.: +49 340 2190-0Fax: +49 340 [email protected]
Dipl.-Ing. Uwe AheimerEulenhof 14, 74219 MöckmühlTel.: +49 6298 929071Fax: +49 6298 929072Mobil: +49 173 [email protected]
Schaltbare Kupplungen & BremsenDipl.-Ing. Alexander EnnulatGrabenstetterstr. 28, 72587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Dipl.-Ing. Ralf BeilkeHansastraße 120, 59425 UnnaTel.: +49 2303 102-435Fax: +49 2303 102-6435Mobil: +49 172 [email protected]
Stromag WEP GmbHScheibenbremsen Windenergieanlagen Dipl.-Ing. Martin Platt Hansastraße 120, 59425 Unna Tel.: +49 2303 102-507 Fax: +49 2303 102-400 Mobil: +49 173 5992811 [email protected]
Dipl.-Wirtsch.-Ing. Werner Höner Hansastraße 120, 59425 Unna Tel.: +49 2303 102-241 Fax: +49 2303 102-400 [email protected]
Scheibenbremsen Industrie Dipl.-Wirtsch.-Ing. Bernd Kortmann Hansastraße 120, 59425 Unna Tel.: +49 2303 102-394 Fax: +49 2303 102-255 Mobil: +49 172 2313056 [email protected]
Ing. Ernst FaulbaumHansastraße 120, 59425 UnnaTel.: +49 2303 102-387Fax: +49 2303 102-255Mobil: +49 173 [email protected]
Endschalter Dipl.-Ing. Eberhard Stubbe Weidenweg 7, 18211 Bargeshagen Tel.: +49 38203 22123 Fax: +49 38203 22139 Mobil: +49 172 6331676 [email protected]
Elastische Kupplungen Ing. Karsten Hinte Am Barloh 9, 31535 Neustadt Tel.: +49 5032 8017784 Fax: +49 5032 8017785 Mobil +49 172 5768863 [email protected]
Ing. Hans-Uwe GesnerPfisterstraße 4, 93189 ReichenbachTel.: +49 9464 911520Fax: +49 2303 1026018Mobil: +49 173 [email protected]
Klaas van Dijk Dijkhhuizen 6NL - 7961 AK, RuinerwoldTel.: +31 522 480030Fax: +49 2303 1026306Mobil: +49 172 284 [email protected]
Belgien Stromag Benelux NV Wolfsakker 8, 9160 Lokeren Tel.: +32 9 3268130 Fax: +32 9 3268132 [email protected]
FrankreichStromag France SASVertrieb:20, Allée des Erables - Paris Nord II95911 Roissy CDG CédexTel.: +33 149 903220Fax: +33 149 [email protected]:Avenue de l‘Europe18150 La Guerche / L‘AuboisTel.: +33 248 807272Fax: +33 248 740524
Stromag SASZ.I. Edison, 9 rue Jean-Baptiste Dumaire57204 Sarreguemines CédexTel.: +33 387 952543Fax: +33 387 [email protected]ätzlich Repräsentant in:Algerien, Marokko, Tunesien
GroßbritannienStromag Ltd.29, Wellingborough Rd.Rushden Northants NN10 9YETel.: +44 1933 350407Fax: +44 1933 [email protected]ätzlich Repräsentant in:Australien, Bangladesh, China, Indien,Irland, Hong Kong, Singapur
ItalienStromag Italia S.p.A.Via Carducci 13320093 Cologno Monzese (Mi)Tel.: +39 02 2540341Fax: +39 02 [email protected]
ÖsterreichStromag Antriebstechnik GmbHTriester Strasse 14, 2351 Wr. NeudorfTel.: +43 2236 23704Fax: +43 2236 [email protected]ätzlich Repräsentant in:Bosnien, Bulgarien, Griechenland,Kroatien, Mazedonien, Montenegro,Rumänien, Serbien, Slovenien,Türkei, Ungarn, Zypern
Spanien Stromag Española S.A.Terra Alta, 10 - Local 108330 Premià de Mar (Barcelona)Tel.: +34 93 7523203Fax: +34 93 [email protected]
Tschechische RepublikStromag Brno s.r.o.Špitálka 23a, 60200 BrnoTel.: +420 5 43210637Fax: +420 5 [email protected]ätzlich Repräsentant in:Slowakei
China Beijing Deven Ptc. Ltd. Room A1602, No.2 Office Building Boya International Center No.1 Lize zhongyi Road Wangjing Beijing China 100102 Tel.: +86 10 84720021 Fax: +86 10 84720020 [email protected]
Stromag Drive Technology (Taicang) Co. Ltd. 12 East Chaoyang Road Taicang, Jiangsu China 215400 Tel.: +86 512 5358 1800 Fax: +86 512 5358 0828 [email protected]
IndienStromag India Private Ltd.T-153, MIDCBhosariPune 411026Tel.: +91 20 40769900Fax: +91 20 [email protected]
JapanK. Brasch & Co. Ltd.Y‘s Bldg., Room 4022-13, Tsukishima1-chome, Chuo-kuTokyo 104-0052Tel.: +81 3 55607591Fax: +81 3 [email protected]
SingaporeStromag RepresentativeOffice for South East AsiaVoith Turbo Pte Ltd, Voith Building10, Jalan Lam Huat (off Kranji Road)Singapore 737923Tel.: +65 6861 5100Fax: +65 6861 [email protected]
Süd-KoreaStromag Korea Ltd.891 Tamnip-dong,Yueseong-gu,Daejeon, 305-510Tel.: +82 42 9343737Fax: +82 42 [email protected]
TaiwanLust Technology Co., Ltd.1F, No. 7, Industry E. Rd. IVScience Based Industrial ParkHsinchuTel.: +886 3 5795188Fax: +886 3 [email protected]
Australien Stromag Sales Pty. Unit 8/7 - Rocco Drive Victoria 3179 Tel.: +61 397 532577 Fax: +61 397 532550 [email protected]
Südafrika Powermite Africa (Pty) Ltd. Powermite House 92 Main Reef Road, Technicon, Roodepoort P.O.Box 7745 2000 Johannesburg Tel.: +27 11 7601919 Fax: +27 11 7603099 [email protected]
BrasilienStromagFricçóes e Acoplamentos Ltda.Av. Sargento Geraldo Santana, 15404674-000 São Paulo - SPTel.: +55 11 55471220Fax: +55 11 [email protected]
USA/CanadaStromag Inc.85 Westpark RoadCenterville (Dayton), Ohio 45459, USATel.: +1 937 4333882Fax: +1 937 [email protected]
SIME Corporation 1784 South Metro ParkwayCenterville (Dayton), Ohio 45459, USATel.: +1 937 434 7463Mobil: +1 937 344 [email protected]
PortugalSotécnicaSociedade Electrotécnica, S.A.Rua do Vale de Pereiro, 81250 LisboaTel.: +351 21 9737111Fax: +351 21 [email protected]
RusslandRuss. Föderation und ehem. GUS-StaatenStromag-VertretungOOO „BOLLFILTER Russland“Datschnij Pr. 2 - 1, Liter „A“, Buero 23N, St.Petersburg 198207, RusslandTel./Fax: +7 812 3646180Tel.: +7 901 [email protected]
KompetenzzentrumKompressoranwendungenDr. Spektor, Boris A.127018 Moskau, ul. Skladochnaja 6Tel./Fax: +7 495 6893002Tel.: +7 916 [email protected]
Area Sales ManagerDipl.-Ing. Thomas RingelMobil DEU: +49 172 2322654Mobil RUS: +7 921 [email protected]
SkandinavienStromag AB SverigeDomherrevägen 11SE-192 55 SollentunaTel.: +46 8 7610650Fax: +46 8 [email protected]
Office DanmarkSøvej 26, 9500 HobroTel.: +45 4040 0424Fax: +45 4738 [email protected]
Office SuomiMetsäpellontie 2, 05200 RajamäkiTel.: +358 9 4522122Fax: +358 9 [email protected]
Office NorgeHyggenveien 35, 3440 RøykenTel.: +47 3129 1090Fax: +47 3129 [email protected]
SchweizStromag-VertretungGrabenstetterstr. 2872587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Safety for every application
Assembly at wind turbine manufacturers must be high-
ly effective and efficient and the employed sequences
must be uncomplicated and fast. For this purpose,
compact, preadjusted components are used as far
as possible which can be assembled quickly and
easily.
Stromag gear-type limit switches are espe-
cially designed to meet these requirements.
These mechanical switches for reliable travel
limitation and highly precise position feed-
back systems for exacting position control
of the blades or nacelle are integrated in
one housing. Supplying pre-adjusted
components ensures that mechanical as-
sembly is reduced to a few screws and
electrical connection is quick and uses
easy identification for plug connection.
The mechanical mounting options and
electrical connections are developed
and optimised in close co-operation
with the design departments of wind
turbine manufacturers.
Limit switches for PITCH and YAWdrives in wind
turbines
Safe - precise - reliable
Stromagsafety in motion
For decades, the Stromag-Group has been a sought-af-
ter partner in the mechanical drive engineering sector. At-
tractive, tailor-made and cost-effective solutions combined
with products of a high standard of quality guarantee op-
timum customer benefits.
Stromag has been producing gear-type and spindle-
operated limit switches for over 50 years and has been
active in this market globally since the introduction of
wind power technology.
With a wide range of different types of gear sys-
tems, switching contacts and metal and plastic
housings, Stromag offers customised solu-
tions for every application and is an indis-
pensable partner for gear-type limit swit-
ches in the wind turbine market.
The various combinations of gear-
type limit switches with analogue or
digital position feedback systems
are integrated into flexible housing
constructions for precise operation
of PITCH and YAW drives.
safe
precise
reliable
2331
0
Stromag AGHansastraße 12059425 UnnaTel.: +49 2303 102-0Fax: +49 2303 [email protected]
Stromag Dessau GmbHDipl.-Ing. Dirk FahlbuschDessauer Straße 10, 06844 DessauTel.: +49 340 2190-0Fax: +49 340 [email protected]
Dipl.-Ing. Uwe AheimerEulenhof 14, 74219 MöckmühlTel.: +49 6298 929071Fax: +49 6298 929072Mobil: +49 173 [email protected]
Schaltbare Kupplungen & BremsenDipl.-Ing. Alexander EnnulatGrabenstetterstr. 28, 72587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Dipl.-Ing. Ralf BeilkeHansastraße 120, 59425 UnnaTel.: +49 2303 102-435Fax: +49 2303 102-6435Mobil: +49 172 [email protected]
Stromag WEP GmbHScheibenbremsen Windenergieanlagen Dipl.-Ing. Martin Platt Hansastraße 120, 59425 Unna Tel.: +49 2303 102-507 Fax: +49 2303 102-400 Mobil: +49 173 5992811 [email protected]
Dipl.-Wirtsch.-Ing. Werner Höner Hansastraße 120, 59425 Unna Tel.: +49 2303 102-241 Fax: +49 2303 102-400 [email protected]
Scheibenbremsen Industrie Dipl.-Wirtsch.-Ing. Bernd Kortmann Hansastraße 120, 59425 Unna Tel.: +49 2303 102-394 Fax: +49 2303 102-255 Mobil: +49 172 2313056 [email protected]
Ing. Ernst FaulbaumHansastraße 120, 59425 UnnaTel.: +49 2303 102-387Fax: +49 2303 102-255Mobil: +49 173 [email protected]
Endschalter Dipl.-Ing. Eberhard Stubbe Weidenweg 7, 18211 Bargeshagen Tel.: +49 38203 22123 Fax: +49 38203 22139 Mobil: +49 172 6331676 [email protected]
Elastische Kupplungen Ing. Karsten Hinte Am Barloh 9, 31535 Neustadt Tel.: +49 5032 8017784 Fax: +49 5032 8017785 Mobil +49 172 5768863 [email protected]
Ing. Hans-Uwe GesnerPfisterstraße 4, 93189 ReichenbachTel.: +49 9464 911520Fax: +49 2303 1026018Mobil: +49 173 [email protected]
Klaas van Dijk Dijkhhuizen 6NL - 7961 AK, RuinerwoldTel.: +31 522 480030Fax: +49 2303 1026306Mobil: +49 172 284 [email protected]
Belgien Stromag Benelux NV Wolfsakker 8, 9160 Lokeren Tel.: +32 9 3268130 Fax: +32 9 3268132 [email protected]
FrankreichStromag France SASVertrieb:20, Allée des Erables - Paris Nord II95911 Roissy CDG CédexTel.: +33 149 903220Fax: +33 149 [email protected]:Avenue de l‘Europe18150 La Guerche / L‘AuboisTel.: +33 248 807272Fax: +33 248 740524
Stromag SASZ.I. Edison, 9 rue Jean-Baptiste Dumaire57204 Sarreguemines CédexTel.: +33 387 952543Fax: +33 387 [email protected]ätzlich Repräsentant in:Algerien, Marokko, Tunesien
GroßbritannienStromag Ltd.29, Wellingborough Rd.Rushden Northants NN10 9YETel.: +44 1933 350407Fax: +44 1933 [email protected]ätzlich Repräsentant in:Australien, Bangladesh, China, Indien,Irland, Hong Kong, Singapur
ItalienStromag Italia S.p.A.Via Carducci 13320093 Cologno Monzese (Mi)Tel.: +39 02 2540341Fax: +39 02 [email protected]
ÖsterreichStromag Antriebstechnik GmbHTriester Strasse 14, 2351 Wr. NeudorfTel.: +43 2236 23704Fax: +43 2236 [email protected]ätzlich Repräsentant in:Bosnien, Bulgarien, Griechenland,Kroatien, Mazedonien, Montenegro,Rumänien, Serbien, Slovenien,Türkei, Ungarn, Zypern
Spanien Stromag Española S.A.Terra Alta, 10 - Local 108330 Premià de Mar (Barcelona)Tel.: +34 93 7523203Fax: +34 93 [email protected]
Tschechische RepublikStromag Brno s.r.o.Špitálka 23a, 60200 BrnoTel.: +420 5 43210637Fax: +420 5 [email protected]ätzlich Repräsentant in:Slowakei
China Beijing Deven Ptc. Ltd. Room A1602, No.2 Office Building Boya International Center No.1 Lize zhongyi Road Wangjing Beijing China 100102 Tel.: +86 10 84720021 Fax: +86 10 84720020 [email protected]
Stromag Drive Technology (Taicang) Co. Ltd. 12 East Chaoyang Road Taicang, Jiangsu China 215400 Tel.: +86 512 5358 1800 Fax: +86 512 5358 0828 [email protected]
IndienStromag India Private Ltd.T-153, MIDCBhosariPune 411026Tel.: +91 20 40769900Fax: +91 20 [email protected]
JapanK. Brasch & Co. Ltd.Y‘s Bldg., Room 4022-13, Tsukishima1-chome, Chuo-kuTokyo 104-0052Tel.: +81 3 55607591Fax: +81 3 [email protected]
SingaporeStromag RepresentativeOffice for South East AsiaVoith Turbo Pte Ltd, Voith Building10, Jalan Lam Huat (off Kranji Road)Singapore 737923Tel.: +65 6861 5100Fax: +65 6861 [email protected]
Süd-KoreaStromag Korea Ltd.891 Tamnip-dong,Yueseong-gu,Daejeon, 305-510Tel.: +82 42 9343737Fax: +82 42 [email protected]
TaiwanLust Technology Co., Ltd.1F, No. 7, Industry E. Rd. IVScience Based Industrial ParkHsinchuTel.: +886 3 5795188Fax: +886 3 [email protected]
Australien Stromag Sales Pty. Unit 8/7 - Rocco Drive Victoria 3179 Tel.: +61 397 532577 Fax: +61 397 532550 [email protected]
Südafrika Powermite Africa (Pty) Ltd. Powermite House 92 Main Reef Road, Technicon, Roodepoort P.O.Box 7745 2000 Johannesburg Tel.: +27 11 7601919 Fax: +27 11 7603099 [email protected]
BrasilienStromagFricçóes e Acoplamentos Ltda.Av. Sargento Geraldo Santana, 15404674-000 São Paulo - SPTel.: +55 11 55471220Fax: +55 11 [email protected]
USA/CanadaStromag Inc.85 Westpark RoadCenterville (Dayton), Ohio 45459, USATel.: +1 937 4333882Fax: +1 937 [email protected]
SIME Corporation 1784 South Metro ParkwayCenterville (Dayton), Ohio 45459, USATel.: +1 937 434 7463Mobil: +1 937 344 [email protected]
PortugalSotécnicaSociedade Electrotécnica, S.A.Rua do Vale de Pereiro, 81250 LisboaTel.: +351 21 9737111Fax: +351 21 [email protected]
RusslandRuss. Föderation und ehem. GUS-StaatenStromag-VertretungOOO „BOLLFILTER Russland“Datschnij Pr. 2 - 1, Liter „A“, Buero 23N, St.Petersburg 198207, RusslandTel./Fax: +7 812 3646180Tel.: +7 901 [email protected]
KompetenzzentrumKompressoranwendungenDr. Spektor, Boris A.127018 Moskau, ul. Skladochnaja 6Tel./Fax: +7 495 6893002Tel.: +7 916 [email protected]
Area Sales ManagerDipl.-Ing. Thomas RingelMobil DEU: +49 172 2322654Mobil RUS: +7 921 [email protected]
SkandinavienStromag AB SverigeDomherrevägen 11SE-192 55 SollentunaTel.: +46 8 7610650Fax: +46 8 [email protected]
Office DanmarkSøvej 26, 9500 HobroTel.: +45 4040 0424Fax: +45 4738 [email protected]
Office SuomiMetsäpellontie 2, 05200 RajamäkiTel.: +358 9 4522122Fax: +358 9 [email protected]
Office NorgeHyggenveien 35, 3440 RøykenTel.: +47 3129 1090Fax: +47 3129 [email protected]
SchweizStromag-VertretungGrabenstetterstr. 2872587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Safety for every application
Assembly at wind turbine manufacturers must be high-
ly effective and efficient and the employed sequences
must be uncomplicated and fast. For this purpose,
compact, preadjusted components are used as far
as possible which can be assembled quickly and
easily.
Stromag gear-type limit switches are espe-
cially designed to meet these requirements.
These mechanical switches for reliable travel
limitation and highly precise position feed-
back systems for exacting position control
of the blades or nacelle are integrated in
one housing. Supplying pre-adjusted
components ensures that mechanical as-
sembly is reduced to a few screws and
electrical connection is quick and uses
easy identification for plug connection.
The mechanical mounting options and
electrical connections are developed
and optimised in close co-operation
with the design departments of wind
turbine manufacturers.
Limit switches for PITCH and YAWdrives in wind
turbines
Safe - precise - reliable
Stromagsafety in motion
For decades, the Stromag-Group has been a sought-af-
ter partner in the mechanical drive engineering sector. At-
tractive, tailor-made and cost-effective solutions combined
with products of a high standard of quality guarantee op-
timum customer benefits.
Stromag has been producing gear-type and spindle-
operated limit switches for over 50 years and has been
active in this market globally since the introduction of
wind power technology.
With a wide range of different types of gear sys-
tems, switching contacts and metal and plastic
housings, Stromag offers customised solu-
tions for every application and is an indis-
pensable partner for gear-type limit swit-
ches in the wind turbine market.
The various combinations of gear-
type limit switches with analogue or
digital position feedback systems
are integrated into flexible housing
constructions for precise operation
of PITCH and YAW drives.
safe
precise
reliable
2331
0
Stromag AGHansastraße 12059425 UnnaTel.: +49 2303 102-0Fax: +49 2303 [email protected]
Stromag Dessau GmbHDipl.-Ing. Dirk FahlbuschDessauer Straße 10, 06844 DessauTel.: +49 340 2190-0Fax: +49 340 [email protected]
Dipl.-Ing. Uwe AheimerEulenhof 14, 74219 MöckmühlTel.: +49 6298 929071Fax: +49 6298 929072Mobil: +49 173 [email protected]
Schaltbare Kupplungen & BremsenDipl.-Ing. Alexander EnnulatGrabenstetterstr. 28, 72587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Dipl.-Ing. Ralf BeilkeHansastraße 120, 59425 UnnaTel.: +49 2303 102-435Fax: +49 2303 102-6435Mobil: +49 172 [email protected]
Stromag WEP GmbHScheibenbremsen Windenergieanlagen Dipl.-Ing. Martin Platt Hansastraße 120, 59425 Unna Tel.: +49 2303 102-507 Fax: +49 2303 102-400 Mobil: +49 173 5992811 [email protected]
Dipl.-Wirtsch.-Ing. Werner Höner Hansastraße 120, 59425 Unna Tel.: +49 2303 102-241 Fax: +49 2303 102-400 [email protected]
Scheibenbremsen Industrie Dipl.-Wirtsch.-Ing. Bernd Kortmann Hansastraße 120, 59425 Unna Tel.: +49 2303 102-394 Fax: +49 2303 102-255 Mobil: +49 172 2313056 [email protected]
Ing. Ernst FaulbaumHansastraße 120, 59425 UnnaTel.: +49 2303 102-387Fax: +49 2303 102-255Mobil: +49 173 [email protected]
Endschalter Dipl.-Ing. Eberhard Stubbe Weidenweg 7, 18211 Bargeshagen Tel.: +49 38203 22123 Fax: +49 38203 22139 Mobil: +49 172 6331676 [email protected]
Elastische Kupplungen Ing. Karsten Hinte Am Barloh 9, 31535 Neustadt Tel.: +49 5032 8017784 Fax: +49 5032 8017785 Mobil +49 172 5768863 [email protected]
Ing. Hans-Uwe GesnerPfisterstraße 4, 93189 ReichenbachTel.: +49 9464 911520Fax: +49 2303 1026018Mobil: +49 173 [email protected]
Klaas van Dijk Dijkhhuizen 6NL - 7961 AK, RuinerwoldTel.: +31 522 480030Fax: +49 2303 1026306Mobil: +49 172 284 [email protected]
Belgien Stromag Benelux NV Wolfsakker 8, 9160 Lokeren Tel.: +32 9 3268130 Fax: +32 9 3268132 [email protected]
FrankreichStromag France SASVertrieb:20, Allée des Erables - Paris Nord II95911 Roissy CDG CédexTel.: +33 149 903220Fax: +33 149 [email protected]:Avenue de l‘Europe18150 La Guerche / L‘AuboisTel.: +33 248 807272Fax: +33 248 740524
Stromag SASZ.I. Edison, 9 rue Jean-Baptiste Dumaire57204 Sarreguemines CédexTel.: +33 387 952543Fax: +33 387 [email protected]ätzlich Repräsentant in:Algerien, Marokko, Tunesien
GroßbritannienStromag Ltd.29, Wellingborough Rd.Rushden Northants NN10 9YETel.: +44 1933 350407Fax: +44 1933 [email protected]ätzlich Repräsentant in:Australien, Bangladesh, China, Indien,Irland, Hong Kong, Singapur
ItalienStromag Italia S.p.A.Via Carducci 13320093 Cologno Monzese (Mi)Tel.: +39 02 2540341Fax: +39 02 [email protected]
ÖsterreichStromag Antriebstechnik GmbHTriester Strasse 14, 2351 Wr. NeudorfTel.: +43 2236 23704Fax: +43 2236 [email protected]ätzlich Repräsentant in:Bosnien, Bulgarien, Griechenland,Kroatien, Mazedonien, Montenegro,Rumänien, Serbien, Slovenien,Türkei, Ungarn, Zypern
Spanien Stromag Española S.A.Terra Alta, 10 - Local 108330 Premià de Mar (Barcelona)Tel.: +34 93 7523203Fax: +34 93 [email protected]
Tschechische RepublikStromag Brno s.r.o.Špitálka 23a, 60200 BrnoTel.: +420 5 43210637Fax: +420 5 [email protected]ätzlich Repräsentant in:Slowakei
China Beijing Deven Ptc. Ltd. Room A1602, No.2 Office Building Boya International Center No.1 Lize zhongyi Road Wangjing Beijing China 100102 Tel.: +86 10 84720021 Fax: +86 10 84720020 [email protected]
Stromag Drive Technology (Taicang) Co. Ltd. 12 East Chaoyang Road Taicang, Jiangsu China 215400 Tel.: +86 512 5358 1800 Fax: +86 512 5358 0828 [email protected]
IndienStromag India Private Ltd.T-153, MIDCBhosariPune 411026Tel.: +91 20 40769900Fax: +91 20 [email protected]
JapanK. Brasch & Co. Ltd.Y‘s Bldg., Room 4022-13, Tsukishima1-chome, Chuo-kuTokyo 104-0052Tel.: +81 3 55607591Fax: +81 3 [email protected]
SingaporeStromag RepresentativeOffice for South East AsiaVoith Turbo Pte Ltd, Voith Building10, Jalan Lam Huat (off Kranji Road)Singapore 737923Tel.: +65 6861 5100Fax: +65 6861 [email protected]
Süd-KoreaStromag Korea Ltd.891 Tamnip-dong,Yueseong-gu,Daejeon, 305-510Tel.: +82 42 9343737Fax: +82 42 [email protected]
TaiwanLust Technology Co., Ltd.1F, No. 7, Industry E. Rd. IVScience Based Industrial ParkHsinchuTel.: +886 3 5795188Fax: +886 3 [email protected]
Australien Stromag Sales Pty. Unit 8/7 - Rocco Drive Victoria 3179 Tel.: +61 397 532577 Fax: +61 397 532550 [email protected]
Südafrika Powermite Africa (Pty) Ltd. Powermite House 92 Main Reef Road, Technicon, Roodepoort P.O.Box 7745 2000 Johannesburg Tel.: +27 11 7601919 Fax: +27 11 7603099 [email protected]
BrasilienStromagFricçóes e Acoplamentos Ltda.Av. Sargento Geraldo Santana, 15404674-000 São Paulo - SPTel.: +55 11 55471220Fax: +55 11 [email protected]
USA/CanadaStromag Inc.85 Westpark RoadCenterville (Dayton), Ohio 45459, USATel.: +1 937 4333882Fax: +1 937 [email protected]
SIME Corporation 1784 South Metro ParkwayCenterville (Dayton), Ohio 45459, USATel.: +1 937 434 7463Mobil: +1 937 344 [email protected]
PortugalSotécnicaSociedade Electrotécnica, S.A.Rua do Vale de Pereiro, 81250 LisboaTel.: +351 21 9737111Fax: +351 21 [email protected]
RusslandRuss. Föderation und ehem. GUS-StaatenStromag-VertretungOOO „BOLLFILTER Russland“Datschnij Pr. 2 - 1, Liter „A“, Buero 23N, St.Petersburg 198207, RusslandTel./Fax: +7 812 3646180Tel.: +7 901 [email protected]
KompetenzzentrumKompressoranwendungenDr. Spektor, Boris A.127018 Moskau, ul. Skladochnaja 6Tel./Fax: +7 495 6893002Tel.: +7 916 [email protected]
Area Sales ManagerDipl.-Ing. Thomas RingelMobil DEU: +49 172 2322654Mobil RUS: +7 921 [email protected]
SkandinavienStromag AB SverigeDomherrevägen 11SE-192 55 SollentunaTel.: +46 8 7610650Fax: +46 8 [email protected]
Office DanmarkSøvej 26, 9500 HobroTel.: +45 4040 0424Fax: +45 4738 [email protected]
Office SuomiMetsäpellontie 2, 05200 RajamäkiTel.: +358 9 4522122Fax: +358 9 [email protected]
Office NorgeHyggenveien 35, 3440 RøykenTel.: +47 3129 1090Fax: +47 3129 [email protected]
SchweizStromag-VertretungGrabenstetterstr. 2872587 Römerstein-StrohweilerTel.: +49 7382 936460Fax: +49 2303 102-6009Mobil: +49 172 [email protected]
Limit switches for YAW drives
The mechanical switching contacts for stopping the rotary motion of the nacelle by
means of predefined end positions in form of cable anti-twist protection and diverse
position feedback systems with analogue (e.g. potentiometers, shaft encoders or si-
milar) or digital (e.g. absolute encoders, incremental encoders or similar) sensors for
YAW drives are integrated in one housing. Customised pluggable solutions ensure
quick and easy installation. We are happy to develop together with our customers
special cam configurations for Gray code binary systems, for example.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Limit switches for PITCH drives
The mechanical switching contacts and high-precision single-turn or multi-turn
absolute encoders for pitch drives are integrated in one housing. In addition to
safe switch off in the limit positions, the absolute blade position in wind operation
is signalled to the control via 1:1 driven encoders. The use of pretensioned, also in
combination with Wheel adjustments, ensures a backlash-free rotary motion from
the ball joint to the input shaft of the encoder. Customised easy to use plug solu-
tions can also be provided for pitch switches for quick and easy installation.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Safe stopping at limit positions with cable twist protection »
Quick and safe integration of encoder elements for positioning detection »
Housing with high degree of protection up to IP65 »
Analogue signal with potentiometer (0-10V DC or 4-20mA), rotating »
synchronous with cam discs
Incremental encoder solutions (pure count signal with channels A B, 0, as well »
as inverted channels) 1:1 via bevel gear stage from switch input shaft
High-end solution with directly driven absolute encoders, integrated in »
housing or mounted externally on extended shaft
Customised cam disc angle (e.g. detection of rotation direction, Gray code »
system, software limit switches for normal switch off and hardware switches
for EMERGENCY shutdown)
Up to 8 switching contacts in one housing »
Increased safety with positive opening NC contacts »
Retrofit solutions with universal adapter plates for replacing existing systems »
3D design support for customised mounting solutions »
Service-friendly, cost-optimised and safe installation »
Preconfigured plug and run connections »
Preadjustable configured switch off points in conjunction with pinion »
wheels with the option of precise switching point gear adjustment
available on request
Repeatable switching points »
Maximum precision with easy and safe adjustment »
Easy, backlash-free integration of directly driven encoders »
Excellent ergonomics and easy handling on mounting and »
commissioning
Easy alignment during installation »
Geared cam limit switch GL compliant in pitch operation (redundant »
safety switch available on request)
Use of pre-tensioned pinion whells for backlash-free drive of absolute »
encoders
Especially developed gear ratios suitable for all ball joints for highly pre- »
cise and efficient rotor blade adjustment
Housing with high degree of protection up to IP66 »
YA
W
YAW
PIT
CH
PITCH
Stromag gear-type limit switches are especially designed to stop the rotary
motion of wind turbines safely.
Light Cam® with one switching contact
for safe stopping
51 series with directly driven absolute encoder alterna-
tively as MT or ST solution
Light Cam® with directly driven incremental encoder
and easy identification for plug connection
Light Cam® with integrated potentiometer
WKA with absolute encoders and LED signallingLight Cam® with directly externally driven
absolute encoder
Limit switches for YAW drives
The mechanical switching contacts for stopping the rotary motion of the nacelle by
means of predefined end positions in form of cable anti-twist protection and diverse
position feedback systems with analogue (e.g. potentiometers, shaft encoders or si-
milar) or digital (e.g. absolute encoders, incremental encoders or similar) sensors for
YAW drives are integrated in one housing. Customised pluggable solutions ensure
quick and easy installation. We are happy to develop together with our customers
special cam configurations for Gray code binary systems, for example.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Limit switches for PITCH drives
The mechanical switching contacts and high-precision single-turn or multi-turn
absolute encoders for pitch drives are integrated in one housing. In addition to
safe switch off in the limit positions, the absolute blade position in wind operation
is signalled to the control via 1:1 driven encoders. The use of pretensioned, also in
combination with Wheel adjustments, ensures a backlash-free rotary motion from
the ball joint to the input shaft of the encoder. Customised easy to use plug solu-
tions can also be provided for pitch switches for quick and easy installation.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Safe stopping at limit positions with cable twist protection »
Quick and safe integration of encoder elements for positioning detection »
Housing with high degree of protection up to IP65 »
Analogue signal with potentiometer (0-10V DC or 4-20mA), rotating »
synchronous with cam discs
Incremental encoder solutions (pure count signal with channels A B, 0, as well »
as inverted channels) 1:1 via bevel gear stage from switch input shaft
High-end solution with directly driven absolute encoders, integrated in »
housing or mounted externally on extended shaft
Customised cam disc angle (e.g. detection of rotation direction, Gray code »
system, software limit switches for normal switch off and hardware switches
for EMERGENCY shutdown)
Up to 8 switching contacts in one housing »
Increased safety with positive opening NC contacts »
Retrofit solutions with universal adapter plates for replacing existing systems »
3D design support for customised mounting solutions »
Service-friendly, cost-optimised and safe installation »
Preconfigured plug and run connections »
Preadjustable configured switch off points in conjunction with pinion »
wheels with the option of precise switching point gear adjustment
available on request
Repeatable switching points »
Maximum precision with easy and safe adjustment »
Easy, backlash-free integration of directly driven encoders »
Excellent ergonomics and easy handling on mounting and »
commissioning
Easy alignment during installation »
Geared cam limit switch GL compliant in pitch operation (redundant »
safety switch available on request)
Use of pre-tensioned pinion whells for backlash-free drive of absolute »
encoders
Especially developed gear ratios suitable for all ball joints for highly pre- »
cise and efficient rotor blade adjustment
Housing with high degree of protection up to IP66 »
YA
W
YAW
PIT
CH
PITCH
Stromag gear-type limit switches are especially designed to stop the rotary
motion of wind turbines safely.
Light Cam® with one switching contact
for safe stopping
51 series with directly driven absolute encoder alterna-
tively as MT or ST solution
Light Cam® with directly driven incremental encoder
and easy identification for plug connection
Light Cam® with integrated potentiometer
WKA with absolute encoders and LED signallingLight Cam® with directly externally driven
absolute encoder
Limit switches for YAW drives
The mechanical switching contacts for stopping the rotary motion of the nacelle by
means of predefined end positions in form of cable anti-twist protection and diverse
position feedback systems with analogue (e.g. potentiometers, shaft encoders or si-
milar) or digital (e.g. absolute encoders, incremental encoders or similar) sensors for
YAW drives are integrated in one housing. Customised pluggable solutions ensure
quick and easy installation. We are happy to develop together with our customers
special cam configurations for Gray code binary systems, for example.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Limit switches for PITCH drives
The mechanical switching contacts and high-precision single-turn or multi-turn
absolute encoders for pitch drives are integrated in one housing. In addition to
safe switch off in the limit positions, the absolute blade position in wind operation
is signalled to the control via 1:1 driven encoders. The use of pretensioned, also in
combination with Wheel adjustments, ensures a backlash-free rotary motion from
the ball joint to the input shaft of the encoder. Customised easy to use plug solu-
tions can also be provided for pitch switches for quick and easy installation.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Safe stopping at limit positions with cable twist protection »
Quick and safe integration of encoder elements for positioning detection »
Housing with high degree of protection up to IP65 »
Analogue signal with potentiometer (0-10V DC or 4-20mA), rotating »
synchronous with cam discs
Incremental encoder solutions (pure count signal with channels A B, 0, as well »
as inverted channels) 1:1 via bevel gear stage from switch input shaft
High-end solution with directly driven absolute encoders, integrated in »
housing or mounted externally on extended shaft
Customised cam disc angle (e.g. detection of rotation direction, Gray code »
system, software limit switches for normal switch off and hardware switches
for EMERGENCY shutdown)
Up to 8 switching contacts in one housing »
Increased safety with positive opening NC contacts »
Retrofit solutions with universal adapter plates for replacing existing systems »
3D design support for customised mounting solutions »
Service-friendly, cost-optimised and safe installation »
Preconfigured plug and run connections »
Preadjustable configured switch off points in conjunction with pinion »
wheels with the option of precise switching point gear adjustment
available on request
Repeatable switching points »
Maximum precision with easy and safe adjustment »
Easy, backlash-free integration of directly driven encoders »
Excellent ergonomics and easy handling on mounting and »
commissioning
Easy alignment during installation »
Geared cam limit switch GL compliant in pitch operation (redundant »
safety switch available on request)
Use of pre-tensioned pinion whells for backlash-free drive of absolute »
encoders
Especially developed gear ratios suitable for all ball joints for highly pre- »
cise and efficient rotor blade adjustment
Housing with high degree of protection up to IP66 »
YA
W
YAW
PIT
CH
PITCH
Stromag gear-type limit switches are especially designed to stop the rotary
motion of wind turbines safely.
Light Cam® with one switching contact
for safe stopping
51 series with directly driven absolute encoder alterna-
tively as MT or ST solution
Light Cam® with directly driven incremental encoder
and easy identification for plug connection
Light Cam® with integrated potentiometer
WKA with absolute encoders and LED signallingLight Cam® with directly externally driven
absolute encoder
Limit switches for YAW drives
The mechanical switching contacts for stopping the rotary motion of the nacelle by
means of predefined end positions in form of cable anti-twist protection and diverse
position feedback systems with analogue (e.g. potentiometers, shaft encoders or si-
milar) or digital (e.g. absolute encoders, incremental encoders or similar) sensors for
YAW drives are integrated in one housing. Customised pluggable solutions ensure
quick and easy installation. We are happy to develop together with our customers
special cam configurations for Gray code binary systems, for example.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Limit switches for PITCH drives
The mechanical switching contacts and high-precision single-turn or multi-turn
absolute encoders for pitch drives are integrated in one housing. In addition to
safe switch off in the limit positions, the absolute blade position in wind operation
is signalled to the control via 1:1 driven encoders. The use of pretensioned, also in
combination with Wheel adjustments, ensures a backlash-free rotary motion from
the ball joint to the input shaft of the encoder. Customised easy to use plug solu-
tions can also be provided for pitch switches for quick and easy installation.
We support our customers in every stage of development with modern 3D design
techniques in order to offer the benefit of our extensive expertise in the applica-
tions of our geared cam limit switches for wind turbines at an early stage. This also
extends to making recommendations for possible mounting variants or supporting
bracket solutions or to include them in our scope of supply.
Safe stopping at limit positions with cable twist protection »
Quick and safe integration of encoder elements for positioning detection »
Housing with high degree of protection up to IP65 »
Analogue signal with potentiometer (0-10V DC or 4-20mA), rotating »
synchronous with cam discs
Incremental encoder solutions (pure count signal with channels A B, 0, as well »
as inverted channels) 1:1 via bevel gear stage from switch input shaft
High-end solution with directly driven absolute encoders, integrated in »
housing or mounted externally on extended shaft
Customised cam disc angle (e.g. detection of rotation direction, Gray code »
system, software limit switches for normal switch off and hardware switches
for EMERGENCY shutdown)
Up to 8 switching contacts in one housing »
Increased safety with positive opening NC contacts »
Retrofit solutions with universal adapter plates for replacing existing systems »
3D design support for customised mounting solutions »
Service-friendly, cost-optimised and safe installation »
Preconfigured plug and run connections »
Preadjustable configured switch off points in conjunction with pinion »
wheels with the option of precise switching point gear adjustment
available on request
Repeatable switching points »
Maximum precision with easy and safe adjustment »
Easy, backlash-free integration of directly driven encoders »
Excellent ergonomics and easy handling on mounting and »
commissioning
Easy alignment during installation »
Geared cam limit switch GL compliant in pitch operation (redundant »
safety switch available on request)
Use of pre-tensioned pinion whells for backlash-free drive of absolute »
encoders
Especially developed gear ratios suitable for all ball joints for highly pre- »
cise and efficient rotor blade adjustment
Housing with high degree of protection up to IP66 »
YA
W
YAW
PIT
CH
PITCH
Stromag gear-type limit switches are especially designed to stop the rotary
motion of wind turbines safely.
Light Cam® with one switching contact
for safe stopping
51 series with directly driven absolute encoder alterna-
tively as MT or ST solution
Light Cam® with directly driven incremental encoder
and easy identification for plug connection
Light Cam® with integrated potentiometer
WKA with absolute encoders and LED signallingLight Cam® with directly externally driven
absolute encoder
Stromagsafety in motion
Stromag AG
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-0
Fax: +49 2303 102-201
www.stromag .com
Stromag Dessau GmbH
Dipl.-Ing. Dirk Fahlbusch
Dessauer Straße 10, 06844 Dessau
Tel.: +49 340 2190-0
Fax: +49 340 2190-221
vertrieb.dessau@stromag .com
Dipl.-Ing. Uwe Aheimer
Eulenhof 14, 74219 Möckmühl
Tel.: +49 6298 929071
Fax: +49 6298 929072
Mobil: +49 173 2684179
u.aheimer@stromag .com
Belgien
Stromag Benelux NV
Wolfsakker 8, 9160 Lokeren
Tel.: +32 9 3268130
Fax: +32 9 3268132
Frankreich
Stromag France SAS
Vertrieb:
20, Allée des Erables - Paris Nord II
95911 Roissy CDG Cédex
Tel.: +33 149 903220
Fax: +33 149 890638
Produktion:
Avenue de l’Europe
18150 La Guerche / L’Aubois
Tel.: +33 248 807272
Fax: +33 248 740524
Stromag SAS
Z.I. Edison, 9 rue Jean-Baptiste Dumaire
57204 Sarreguemines Cédex
Tel.: +33 387 952543
Fax: +33 387 954543
Zusätzlich Repräsentant in:
Algerien, Marokko, Tunesien
Großbritannien
Stromag Ltd.
29, Wellingborough Rd.
Rushden Northants NN10 9YE
Tel.: +44 1933 350407
Fax: +44 1933 358692
Zusätzlich Repräsentant in:
Australien, Bangladesh, China, Indien,
Irland, Hong Kong, Singapur
Italien
Stromag Italia S.p.A.
Via Carducci 133
20093 Cologno Monzese (Mi)
Tel.: +39 02 2540341
Fax: +39 02 2532465
Österreich
Stromag Antriebstechnik GmbH
Triester Strasse 14, 2351 Wr. Neudorf
Tel.: +43 2236 23704
Fax: +43 2236 23406
Zusätzlich Repräsentant in:
Bosnien, Bulgarien, Griechenland,
Kroatien, Mazedonien, Montenegro,
Rumänien, Serbien, Slovenien,
Türkei, Ungarn, Zypern
Portugal
Sotécnica
Sociedade Electrotécnica, S.A.
Rua do Vale de Pereiro, 8
1250 Lisboa
Tel.: +351 21 9737111
Fax: +351 21 9737003
Russland
Russ. Föderation und ehem. GUS-Staaten
Stromag-Vertretung
OOO "BOLLFILTER Russland"
Datschnij Pr. 2 - 1, Liter "A", Buero 23N,
St.Petersburg - 198207, Russland
Tel./Fax: +7 812 3646180
Tel.: +7 901 3008961
Kompetenzzentrum
Kompressoranwendungen
Dr. Spektor, Boris A.
127018 Moskau, ul. Skladochnaja, 6
Tel./Fax: +7 495 6893002
Tel.: +7 916 6542342
Area Sales Manager
Dipl.-Ing. Thomas Ringel
Mobil DEU +49 172 2322654
Mobil RUS +7 921 9831459
Schweiz
Stromag-Vertretung
Grabenstetterstr. 28
72587 Römerstein-Strohweiler
Tel.: +49 7382 936460
Fax: +49 2303 102-6009
Mobil: +49 172 5354056
Skandinavien
Stromag AB Sverige
Domherrevägen 11
SE-192 55 Sollentuna
Tel.: +46 8 7610650
Fax: +46 8 7610665
Office Danmark
Søvej 26, 9500 Hobro
Tel.: +45 4040 0424
Fax: +47 3129 1095
Office Suomi
Metsäpellontie 2, 05200 Rajamäki
Tel.: +358 9 4522122
Fax: +358 9 4522112
Office Norge
Hyggenveien 35, 3440 Røyken
Tel.: +47 3129 1090
Fax: +47 3129 1095
Spanien
Stromag Española S.A.
Terra Alta, 10 - Local 1
08330 Premià de Mar (Barcelona)
Tel.: +34 93 7523203
Fax: +34 93 7523278
Tschechische Republik
Stromag Brno s.r.o.
Špitálka 23a, 60200 Brno
Tel.: +420 5 43210637
Fax: +420 5 43210639
Zusätzlich Repräsentant in:
Slowakei
China
Beijing Deven Ptc. Ltd.
Room A1602, No.2 Office
Building Boya International Center
No.1 Lize zhongyi Road
Wangjing Beijing China 100102
Tel.: +86 10 84720021
Fax: +86 10 84720020
Stromag Drive Technology Co. Ltd.
Room 1205
Century Fortune Building
No. 86 East Shanghai Road
Taicang, Jiangsu – China
Tel.: +86 512 53581800
Fax: +86 512 53580828
Indien
Stromag India Private Ltd.
T-153, MIDC
Bhosari
Pune 411026
Tel.: +91 20 40769900
Fax: +91 20 40769910
Japan
K. Brasch & Co. Ltd.
Y’s Bldg., Room 402
2-13, Tsukishima
1-chome, Chuo-ku
Tokyo 104-0052
Tel.: +81 3 55607591
Fax: +81 3 55607595
Singapore
Stromag Representative
Office for South East Asia
Voith Turbo Pte Ltd
Voith Building
10, Jalan Lam Huat (off Kranji Road)
Singapore 737923
Tel.: +65 6861 5100
Fax: +65 6861 5052
Süd-Korea
Temco Ltd.
48-27, Munpyeong-Dong,
Daedeok-Gu,
Daejeon, 306-220
Tel.: +82 42 9343737
Fax: +82 42 9343738
Taiwan
Lust Technology Co., Ltd.
1F, No. 7, Industry E. Rd. IV
Science Based Industrial Park
Hsinchu
Tel.: +886 3 5795188
Fax: +886 3 5795065
AustralienStromag Sales Pty.
Unit 8/7 - Rocco Drive
Victoria 3179
Tel.: +61 397 532577
Fax: +61 397 532550
Südafrika
Powermite Africa (Pty) Ltd
Powermite House
92 Main Reef Road,
Technicon, Roodepoort
P.O.Box 7745
2000 Johannesburg
Tel.: +27 11 7601919
Fax: +27 11 7603099
Brasilien
Stromag
Fricçóes e Acoplamentos Ltda.
Av. Sargento Geraldo Santana, 154
04674-000 São Paulo - SP
Tel.: +55 11 55471220
Fax: +55 11 55242247
USA / Canada
Stromag Inc.
85 Westpark Road
Centerville (Dayton)
Ohio 45459
Tel.: +1 937 4333882
Fax: +1 937 4336598
Schaltbare Kuppl. & Bremsen
Dipl.-Ing. Alexander Ennulat
Grabenstetterstr. 28
72587 Römerstein-Strohweiler
Tel.: +49 7382 936460
Fax: +49 2303 102-6009
Mobil: +49 172 5354056
Dipl.-Ing. Ralf Beilke
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-435
Fax: +49 2303 102-6435
Mobil: +49 172 2313057
Stromag WEP GmbH
Dipl.-Ing. Martin Platt
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-507
Fax: +49 2303 102-400
Mobil: +49 173 5992811
Dipl.-Wirtsch.-Ing. Werner Höner
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-241
Fax: +49 2303 102-400
Mobil: +49 173 3991584
Industriebremsen
Dipl.-Wirtsch.-Ing. Bernd Kortmann
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-394
Fax: +49 2303 102-255
Mobil: +49 172 2313056
Ing. Ernst Faulbaum
Hansastraße 120
59425 Unna
Tel.: +49 2303 102-387
Fax: +49 2303 102-255
Mobil: +49 173 5444413
Endschalter
Dipl.-Ing. Eberhard Stubbe
Weidenweg 7, 18211 Bargeshagen
Tel.: +49 38203 22123
Fax: +49 38203 22139
Mobil: +49 172 6331676
Elastische Kupplungen
Ing. Karsten Hinte
Am Barloh 9
31535 Neustadt
Tel.: +49 5032 8017784
Fax: +49 5032 8017785
Mobil: +49 172 5768863
Ing. Hans-Uwe Gesner
Pfisterstraße 4
93189 Reichenbach
Tel.: +49 9464 911520
Fax: +49 2303 1026018
Mobil: +49 173 7101605
Klaas van Dijk
Dijkhuizen 6
NL – 7961 AK, Ruinerwold
Tel.: +31 522 48 00 30
Fax: +49 2303 102 6306
Mobil: +49 172 284 92 92