STRUCTURED CABLING SOLUTIONS - SaudiConnectsaudiconnect.net/images/2009-2010_Catalog.pdf ·...

SSTTRRUUCCTTUURREEDD CCAABBLLIINNGG SSOOLLUUTTIIOONNSS

2009 - 2010

2009 - 2010

[email protected] - www.netboxwll.com

COMPANY PROFILE

NetBox a reputed developer & manufacturer of Professional Quality Data Cabling Connectivity Products & Solutions, was founded in 2003 with the aim of providing professional quality data connectivity products & accessories to the ever growing Information technology dependent markets. NetBox offers complete End-to-End Datacenter & Structured Cabling Connectivity Solutions including Copper-Fiber-Cabinets & almost all passive accessories. NetBox Solution’s focuses on delivering industry standards based technologies that support the transition to higher-bandwidth networking. NetBox offers solutions that address performance, manageability, speed & reliability. In just a short span of time, NetBox has built a reputation for reliability & professionalism in the products & solutions that we deliver. Our success is primarily due to our philosophy where we truly believe, that our business partners & clients, are an extension of our own business. NetBox clients include major organizations from the Defense, Telecom, Banking, Corporate, Real Estate, Airlines, Construction & other major industry segments.

25 YEAR WARRANTY

NetBox warrants that the product installed is free from physical defects and installation of these products is in keeping and has met all the requirements set out by NetBox for correct methods and practices pertaining to the structured cabling system. For the same period, these products are warranted to meet or exceed the specifications of standards organization including ISO/IEC CENELEC and TIA/EIA for the category of NetBox structured cabling system installed. The warranty will be void, if the products have been misused, damaged, abused, removed from the original site, or have been relocated within the original site by a technician that has not been certified by NetBox as being qualified to install NetBox structured cabling system. The products covered by the warranty include unshielded twisted pair cables, optical fiber cables, patch cables, information outlets and patch panels etc. In no event will NetBox be liable for consequential or incidental damages, including but not limited to damages for lost data, lost power, time profits, revenues or the like arising from the loss of use or interruption of a system due to faulty product. The warranty describe above relates only to NetBox products as separate components and is not a warranty that the products when combined with other third party products or components in a data or communication system, shall meet any level of system performance.


STRUCTURED CABLING PRODUCTS 1 - 26

TELECOM CABLING PRODUCTS 27 - 40

FIBER OPTIC PRODUCTS 41 - 80

CABINETS & RACKS 81 - 94

POWER DISTRIBUTION 95 - 100

ACTIVE PRODUCTS 101 - 114

TOOLKITS 115 - 117

CONTENTS


CCOOMMIINNGG SSOOOONN

NetBox FTTH SOLUTION

Planar Light Wave Circuit Splitters (PLC)

Fiber Optic Distribution Boxes

Fiber Optic Terminal Boxes

Optical Splitter Management Trays

Fiber Optic Splice Cabinets

Fiber Optic Cables

Outdoor Closures

1 [email protected] - www.netboxwll.com

End to End Telecom, Enterprise & Data Center Cabling Solutions

STRUCTURED CABLING PRODUCTS

STRUCTURED CABLING ACCESSORIES 26

CAT.5E UTP CABLING SYSTEM 17 - 21

CAT.5E FTP CABLING SYSTEM 22 - 25

CAT.6 FTP CABLING SYSTEM 12 - 16

CAT.6A 10G UTP CABLING SYSTEM 2 - 3

CAT.6A 10G STP CABLING SYSTEM 4 - 5

CAT.6 UTP CABLING SYSTEM 6 - 11

www.netboxwll.com

2

STRUCTURED CABLING PRODUCTS C

AT

.6A

10

G U

TP

CA

BL

ING

SY

ST

EM

Cat.6A 10G UTP Solid Cable

6-around-1 cable test configuration:

This test is for measuring alien crosstalk loss between pairs of adjacent cables in a 7-cable assembly consisting of the same design. Measure the ANEXT loss and AFEXT loss between each of the pairs of the disturbed cable and each pair of every disturbing cable. This will result in 96 measurements each for ANEXT loss and AFEXT loss. Netbox 10GS Cables are under the 6-around-1 cable

Product Feature: Electrical Characteristics:

Great performance with headroom of upto 6dB All materials comply with ROHS standard Netbox 10GS LAN supports IEEE 802.3an 10G Base-T

standard & TIA/EIA 568-B.2-10 DRAFT.7 Test range from 1 to 750 MHz

Impedence 100 +/- 15 ohms (10-550MHz) DC resistance, unbalance of a pair: 3% Max Capacitance unbalance (pair to ground): 330pF/100M Max Propagation delay skew: 25nS/100M

Cable Data: Ordering Information:

305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor 4 Pairs cabled togather with a spline core separator Jacket: Low-smoke, flame-retardant PVC Outer diameter: 8.0mm Weight: 19 kg/305m Temperature Range: -20°C to +75°C

Color CMR LSZH

Gray NB-C6A-CAU-01-CMR NB-C6A-CAU-01-LSOH

Blue NB-C6A-CAU-02-CMR NB-C6A-CAU-02- LSOH

Purple NB-C6A-CAU-03-CMR NB-C6A-CAU-03- LSOH

White NB-C6A-CAU-04-CMR NB-C6A-CAU-04- LSOH

Electronic Characteristics:

FREQ (MHz)

INS LOSS (dB/100m)

RETURN LOSS

(dB/100m)

NEXT (dB/100m)

PS NEXT (dB/100m)

ACR (dB/100m) PS ACR

(dB/100m) PROP DELAY

(dB/100m)

ALIEN CROSSTALK

PS ANEXT (dB/100m) PS AACRF (dB/100m)

Max Min Min Min Min Min Max Min Min

1.0 2.0 20.0 78.3 76.3 71.8 68.8 570.0 67.0 67.0

4.0 3.7 24.2 69.3 67.3 59.8 56.8 552.0 67.0 66.2

8.0 5.2 26.3 64.8 62.8 53.7 50.7 546.7 67.0 60.1

10.0 5.9 27.0 63.3 61.3 51.8 48.8 545.4 67.0 58.2

16.0 7.4 27.0 60.2 58.2 47.7 44.7 543.0 67.0 54.1

20.0 8.3 27.0 58.8 56.8 45.8 42.8 542.0 67.0 52.2

25.0 9.3 26.3 57.3 55.3 43.8 40.8 541.2 67.0 50.2

31.25 10.4 25.6 55.9 53.9 41.9 38.9 540.4 67.0 48.3

62.5 14.9 23.5 51.4 49.4 35.9 32.9 538.6 65.6 42.3

100 19.0 22.1 48.3 46.3 31.8 28.8 537.6 62.5 38.2

155 24.0 20.8 45.4 43.4 28.0 25.0 536.9 59.6 34.4

200 27.5 20.0 43.8 41.8 25.8 22.8 536.5 58.0 32.2

250 31.0 19.3 42.3 40.3 23.8 20.8 536.3 56.5 30.2

300 34.2 18.8 41.1 39.3 22.3 19.3 536.1 55.3 28.7

350 37.2 18.3 40.1 38.1 20.9 17.9 535.9 54.3 27.3

400 40.0 17.9 39.3 37.3 19.8 16.8 535.8 53.5 26.2

500 45.3 17.5 37.8 35.8 17.8 14.8 535.6 52.0 24.2

www.netboxwll.com

3


AT

.6A 10

G U

TP

CA

BL

ING

SY

ST

EM

Cat.6A 10G UTP Top-Entry Keystone Jack

Color Option:

WH BK BL RE YE GN IV

Part # (XX = color): Description:

1. NB-C6A-KU1-XX Cat.6A channel compliant UTP top-entry (180º) keystone jack, 110 IDC

2. NB-C6A-KU2-XX Cat.6A channel compliant UTP top-entry (180º), shuttered keystone jack, 110 IDC

Cat.6A 10G UTP Right-Angled Keystone Jack

Color Option:



1. NB-C6A-KU3-XX Cat.6A channel compliant UTP right-angled (90º) keystone jack, 110 IDC

2. NB-C6A-KU4-XX Cat.6A channel compliant UTP right-angled (180º), shuttered keystone jack, 110 IDC

Cat.6A 10G UTP In-Line Coupler

Color Option:



1. NB-C6A-LU1-XX Cat.6A channel compliant UTP in-line coupler, outlet mountable

2. NB-C6A-LU2-XX Cat.6A channel compliant UTP in-line coupler, mobile style

Cat.6A 10G UTP Patch Cords

Color Option:

BK BL RE OR GN GR

Part # (XX = color, YY=length (Mtr)): Description:

1. NB-C6A-CU-YY-XX Cat.6A, 23AWG, unscreened T568B wiring patch cord, snagless assembled boot, PVC

2. NB-C6A-CU-YY-XX-LSOH Cat.6A, 23AWG, unscreened T568B wiring patch cord, snagless assembled boot, LSOH

Cat.6A 10G UTP 24 Port Patch Panel

Part # : Description:

1. NB-C6A-PPU-1 Cat.6A channel compliant UTP snap-in patch panel w/rear cable management, 110 IDC, 24-port, black color

2. NB-C6A-PPU-2 Cat.6A channel compliant UTP shuttered snap-in patch panel w/rear cable management, 110 IDC, 24-port, black color

1

1

2

2

2

1

2

1

www.netboxwll.com

4


AT

.6A

10

G S

TP

CA

BL

ING

SY

ST

EM

Cat.6A 10G S/FTP Solid Cable

6-around-1 cable test configuration:

This test is for measuring alien crosstalk loss between pairs of adjacent cables in a 7-cable assembly consisting of the same design. Measure the ANEXT loss and AFEXT loss between each of the pairs of the disturbed cable and each pair of every disturbing cable. This will result in 96 measurements each for ANEXT loss and AFEXT loss. Netbox 10GS Cables are under the 6-around-1 cable

Product Feature: Electrical Characteristics:

Great performance with headroom of upto 6dB All materials comply with ROHS standard Netbox 10GS LAN supports IEEE 802.3an 10G Base-T

standard & TIA/EIA 568-B.2-10 DRAFT.7 Test range from 1 to 750 MHz

Impedence 100 +/- 15 ohms (10-550MHz) DC resistance, unbalance of a pair: 3% Max Capacitance unbalance (pair to ground): 330pF/100M Max Propagation delay skew: 25nS/100M

Cable Data: Ordering Information:

305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor 4 Pairs cabled togather with a spline core separator Jacket: Low-smoke, flame-retardant PVC Outer diameter: 8.0mm Weight: 19 kg/305m Temperature Range: -20°C to +75°C

Color CMR LSZH

Gray NB-C6A-CAS-01-CMR NB-C6A-CAS-01-LSOH

Blue NB-C6A-CAS-02-CMR NB-C6A-CAS-02- LSOH

Purple NB-C6A-CAS-03-CMR NB-C6A-CAS-03- LSOH

White NB-C6A-CAS-04-CMR NB-C6A-CAS-04- LSOH


FREQ (MHz)

INS LOSS (dB/100m)

RETURN LOSS

(dB/100m)

NEXT (dB/100m)

PS NEXT (dB/100m)

ACR (dB/100m) PS ACR

(dB/100m) PROP DELAY

(dB/100m)

ALIEN CROSSTALK

PS ANEXT (dB/100m) PS AACRF (dB/100m)

Max Min Min Min Min Min Max Min Min

1.0 2.0 20.0 78.3 76.3 71.8 68.8 570.0 67.0 67.0

4.0 3.7 24.2 69.3 67.3 59.8 56.8 552.0 67.0 66.2

8.0 5.2 26.3 64.8 62.8 53.7 50.7 546.7 67.0 60.1

10.0 5.9 27.0 63.3 61.3 51.8 48.8 545.4 67.0 58.2

16.0 7.4 27.0 60.2 58.2 47.7 44.7 543.0 67.0 54.1

20.0 8.3 27.0 58.8 56.8 45.8 42.8 542.0 67.0 52.2

25.0 9.3 26.3 57.3 55.3 43.8 40.8 541.2 67.0 50.2

31.25 10.4 25.6 55.9 53.9 41.9 38.9 540.4 67.0 48.3

62.5 14.9 23.5 51.4 49.4 35.9 32.9 538.6 65.6 42.3

100 19.0 22.1 48.3 46.3 31.8 28.8 537.6 62.5 38.2

155 24.0 20.8 45.4 43.4 28.0 25.0 536.9 59.6 34.4

200 27.5 20.0 43.8 41.8 25.8 22.8 536.5 58.0 32.2

250 31.0 19.3 42.3 40.3 23.8 20.8 536.3 56.5 30.2

300 34.2 18.8 41.1 39.3 22.3 19.3 536.1 55.3 28.7

350 37.2 18.3 40.1 38.1 20.9 17.9 535.9 54.3 27.3

400 40.0 17.9 39.3 37.3 19.8 16.8 535.8 53.5 26.2

500 45.3 17.5 37.8 35.8 17.8 14.8 535.6 52.0 24.2

www.netboxwll.com

5


AT

.6A 10

G S

TP

CA

BL

ING

SY

ST

EM

Cat.6A 10G Die-Cast STP right-angled Keystone Jack

Part #: Description:

1. NB-C6A-KS1 Cat.6A channel compliant Die-Cast STP keystone jack, right-angled, 110 IDC

Cat.6A 10G Die-Cast STP Top-Entry Tool-less Keystone Jack


1. NB-C6A-KS2 Cat.6A channel compliant Die-Cast STP keystone jack, top-entry, tool-less, 110 IDC

Cat.6A 10G STP In-Line Coupler


1. NB-C6A-LS1 Cat.6A channel compliant STP in-line coupler, outlet mountable

Cat.6A 10G SSTP Patch Cords

Color Option:

BK BL RE OR GN GR

Part # (XX = color, YY=length (Mtr)): Description:

1. NB-C6A-CS-YY-XX Cat.6A, 23AWG, screened T568B wiring patch cord, snagless molded boot, PVC

2. NB-C6A-CS-YY-XX-LSOH Cat.6A, 23AWG, screened T568B wiring patch cord, snagless molded boot, LSOH

Cat.6A 10G STP 24 Port Patch Panel

Part # : Description:

1. NB-C6A-PPS-1 Cat.6A channel compliant Die-Cast STP snap-in patch panel w/rear cable management, 110 IDC, 24-port, black color

www.netboxwll.com

6


AT

.6 U

TP

CA

BL

ING

SY

ST

EM

Cat. 6 UTP 250 MHz Solid Cable

Application: Industry Standard:

1000BASE-T Gigabit Ethernet (IEEE 802.3) 100Base-T Fast Ethernet (IEEE802.5) 10Base-T (IEEE802.3) 155/622 Mbps 1.2/2.4 Gbps ATM Token Ring (IEEE802.5) 100 Mbps TP-PMD

Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC 11801(2nd edition) IEC 332-1

Cable Data: Electrical Performance (at 250 MHz):

305m(1,000ft) pull Box 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.22 Insulation Dia (±0.03mm): 1.02 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 6.0mm Average jacket thickness : 0.5mm Weight: 13 kg/305m Minimum bend radius: O.D.*6 – 8 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +75°C

1.0-100.0 MHz Impedance: 100± 15 ohms 100.0-250.0 MHz Impedance: 100± 22 ohms Impedance Delay scew≤45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) ≤73.2 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) ≥13.8 Aging Elongation (%): ≥ 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): ≥85% of unaged Aging elongation (%): ≥50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock

Electronic Characteristics: Ordering Information:

Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 74.3 72.0 72.3 67.8 64.8 20.0

4.0 3.8 65.3 61.0 63.3 55.8 52.8 23.0

8.0 5.3 60.8 55.0 58.8 49.7 46.7 24.5

10.0 6.0 59.3 53.0 57.3 47.8 44.8 25.0

16.0 7.6 56.2 49.0 54.2 43.7 40.7 25.0

20.0 8.5 54.8 46.0 52.8 41.8 38.8 25.0

25.0 9.5 53.3 44.0 51.3 39.8 36.8 24.3

31.25 10.7 51.9 41.0 49.9 37.9 34.9 23.6

62.5 15.4 47.4 32.0 45.4 31.9 28.9 21.5

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3

Color PVC LSZH CMR

Gray NB-COP-001 NB-COP-001-LSOH NB-COP-001-CMR

Blue NB-COP-002 NB-COP-002-LSOH NB-COP-002-CMR

Red NB-COP-004 NB-COP-004-LSOH NB-COP-004-CMR

Yellow NB-COP-152 NB-COP-152-LSOH NB-COP-152-CMR

Green NB-COP-003 NB-COP-003-LSOH NB-COP-003-CMR

Orange NB-COP-153 NB-COP-153-LSOH NB-COP-153-CMR

Black NB-COP-154 NB-COP-154-LSOH NB-COP-154-CMR

www.netboxwll.com

7


AT

.6 UT

P C

AB

LIN

G S

YS

TE

M

Cat. 6 UTP 250 MHz Solid Cable (Outdoor Grade)





305m(1,000ft) Reel 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.22 Insulation Dia (±0.03mm): 1.02 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 6.5mm Average jacket thickness : 0.7mm Weight: 14 kg/305m Minimum bend radius: O.D.*6 – 8 Maximum pulling tension: 10Kg Choice of colors Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +85°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 74.3 72.0 72.3 67.8 64.8 20.0

4.0 3.8 65.3 61.0 63.3 55.8 52.8 23.0

8.0 5.3 60.8 55.0 58.8 49.7 46.7 24.5

10.0 6.0 59.3 53.0 57.3 47.8 44.8 25.0

16.0 7.6 56.2 49.0 54.2 43.7 40.7 25.0

20.0 8.5 54.8 46.0 52.8 41.8 38.8 25.0

25.0 9.5 53.3 44.0 51.3 39.8 36.8 24.3

31.25 10.7 51.9 41.0 49.9 37.9 34.9 23.6

62.5 15.4 47.4 32.0 45.4 31.9 28.9 21.5

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3

Color PE

Black NB-COP-202

www.netboxwll.com

8


AT

.6 U

TP

CA

BL

ING

SY

ST

EM

Cat.6 250-MHz, 4 Pair UTP Patch Cords




Cable Data: Electronic Characteristics:

Category 6, 24 AWG Stranded Copper Conductor 50u” Gold Plated on the plug Contacts Temperature Range: -20°C to +75°C FR PVC jacket, LSZH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B

FrequencyMHz

AttenuationDb/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3

Ordering Information:

Length White Blue Green Red Gray Yellow Orange Black

0.5M NB-COP-203 NB-COP-204 NB-COP-205 NB-COP-206 NB-COP-191 NB-COP-207 NB-COP-208 NB-COP-209

1M NB-COP-010 NB-COP-014 NB-COP-018 NB-COP-022 NB-COP-076 NB-COP-156 NB-COP-164 NB-COP-160





www.netboxwll.com

9


AT

.6 UT

P C

AB

LIN

G S

YS

TE

M

Cat.6 24port & 48port UTP Patch Panels

Product Description: Electrical:

24-port 1U / 48-port 2U patch panels, Cat6 UTP type. ETL tested & verified CAT6 channel performance Combined cable management bar. According to the standard of ISO/IEC 11801:2002 CLASS E

and ANSI/TIA/EIA/568B.2-1 Cat6 Standard. Universal wiring, panels are supplied with labeling for both

T568A and T568B. Connecting: FCC port for Cat6 UTP patch cord and IDC for

horizontal distribution in the cables. 110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor

bronze pins; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins.

Use in 250MHz applications.

Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms Min @ 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min

Environmental: Mechanical:

Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to ANSI/TIA/EIA-568 B.2-1 Mates with modular plug conforming to FCC Part 68

Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with

nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-040 24 port Unshielded Cat. 6 patch panel, 1U, 110 & Krone dual Type, with Rear cable management bar

NB-COP-041 48 port Unshielded Cat. 6 patch panel, 2U, 110 & Krone dual Type, with Rear cable management bar

48 Port Patch Panel

24 Port Patch Panel

Rear Cable Management Bar

www.netboxwll.com

10


AT

.6 U

TP

CA

BL

ING

SY

ST

EM

Cat.6 UTP Mini Patch Panel


12 ports patch panel, Cat6 UTP type. ETL tested & verified CAT6 channel performance According to the standard of ISO/IEC 11801:2002 CLASS E and

ANSI/TIA/EIA/568B.2-1 Cat6 Standard. Universal wiring, panels are supplied with labeling for both T568A and

T568B. 110 and Krone dual type IDC termination. Entire high-carbon steel outer frame, with plastic powder cladding. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins;

Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins.





Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel

plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-090 12 port Unshielded Cat.6 Wall mounted patch panel

Cat.6 UTP RJ45 Plug

Product Description:

Housing: Polycarbonate Contact: Copper alloy 50u”gold plated over nickel 24-26 AWG stranded & solid wire Durability: 750 cycles Min. Exceed category 6 specifications Use with the universal RJ crimp tool

Cat.6 UTP Blank Panel


Entire steel 24 ports UTP blank patch panel. Material: Carbon steel, 1.5mm, powder coated, Black color UTP Cat6 or Cat5e keystone jacks can be assembled on this

panel. The cable manager is combined in this patch panel. All kinds of cables with different dimensions can be fixed on the

patch panel. Fitting for horizontal distribution in the equipments room and

equipments connecting.


P/N Description

NB-COP-200 Blank Snap-in patch panel with Back bar, 24 port

NB-COP-047 Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, White

NB-COP-047 P/N: NB-COP-059

www.netboxwll.com

11


AT

.6 UT

P C

AB

LIN

G S

YS

TE

M

Keystone Jack (Cat6 UTP)


Keystone jack, Cat6 UTP type, 90⁰ and 180⁰ punching direction, fit for connecting application of communication ports in working area.

A compact & ingenious designing, with the punching sequence direction marks on the sides of keystone jack, which can provide a correct and quick guide for punching and connecting operation. And the fastener hats will make sure that the cable can be fixed reliably in the IDC clips.

T568A punching sequence and T568B punching sequenceare both compatible.

Connection type: FCC connector for RJ45 patch cord and IDC for 4 pair Cat6 cables.

Fitting for Cat6 general cable distribution systems. Compatible for Cat5 and Cat5e systems.

Inserting duration: 750 times. Punching duration: 250 times. Standard 110 punching tool. Testing condition of transmitting capability: 250MHz.

Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms Min @ 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min CAT6 Permanent Link: Conform to ANSI/TIA/EIA-568 B.2-1


Storage: -40°C to +85°C Operation: 0°C to 70°C Mates with modular plug conforming to FCC Part 68,

Subpart F.

Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with

Nickel Plating Wire: AWG 24-26


Part No. Description

NB-COP-047 Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, White

NB-COP-048 Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, Black

NB-COP-049 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, White

NB-COP-050 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Blue

NB-COP-051 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Green

NB-COP-052 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Red

NB-COP-053 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Yellow

NB-COP-054 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Black

NB-COP-169 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, Orange

NB-COP-056 Cat.6 Tool less, 110/ krone Right-angle (90º) Keystone Jack, T568A/B, White

NB-COP-056 NB-COP-047

www.netboxwll.com

12


AT

.6 F

TP

CA

BL

ING

SY

ST

EM

Cat. 6 FTP 250 MHz Solid Cable





305m(1,000ft) pull Box 100% Aluminum foil tape screen 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.28 Insulation Dia (±0.03mm): 1.02 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 6.6mm Average jacket thickness : 0.5mm Weight: 17kg/305m Minimum bend radius: O.D.*6 – 8 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +75°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT db

EL-FEXT db/100m PS EL-FEXT

Db/100m RL db

1.0 2.0 74.3 72.0 72.3 67.8 64.8 20.0

4.0 3.8 65.3 61.0 63.3 55.8 52.8 23.0

8.0 5.3 60.8 55.0 58.8 49.7 46.7 24.5

10.0 6.0 59.3 53.0 57.3 47.8 44.8 25.0

16.0 7.6 56.2 49.0 54.2 43.7 40.7 25.0

20.0 8.5 54.8 46.0 52.8 41.8 38.8 25.0

25.0 9.5 53.3 44.0 51.3 39.8 36.8 24.3

31.25 10.7 51.9 41.0 49.9 37.9 34.9 23.6

62.5 15.4 47.4 32.0 45.4 31.9 28.9 21.5

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3


Color PVC LSZH CMR

Dark Gray NB-COP-155 NB-COP-155-LSOH NB-COP-155-CMR







www.netboxwll.com

13


AT

.6 FT

P C

AB

LIN

G S

YS

TE

M

Cat. 6 FTP 250 MHz Solid Cable (Outdoor Grade)





305m(1,000ft) Reel 100% Aluminum foil tape screen 23 AWG Solid Bare Copper Conductor (0.57mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.28 Insulation Dia (±0.03mm): 1.02 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 6.6mm Average jacket thickness : 0.5mm Weight: 18kg/305m Minimum bend radius: O.D.*6 – 8 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +85°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 74.3 72.0 72.3 67.8 64.8 20.0

4.0 3.8 65.3 61.0 63.3 55.8 52.8 23.0

8.0 5.3 60.8 55.0 58.8 49.7 46.7 24.5

10.0 6.0 59.3 53.0 57.3 47.8 44.8 25.0

16.0 7.6 56.2 49.0 54.2 43.7 40.7 25.0

20.0 8.5 54.8 46.0 52.8 41.8 38.8 25.0

25.0 9.5 53.3 44.0 51.3 39.8 36.8 24.3

31.25 10.7 51.9 41.0 49.9 37.9 34.9 23.6

62.5 15.4 47.4 32.0 45.4 31.9 28.9 21.5

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3

Color P/N

Black NB-COP-210

www.netboxwll.com

14


AT

.6 F

TP

CA

BL

ING

SY

ST

EM

Cat.6 4 Pair FTP Patch Cords





Category 6, 24 AWG Stranded Copper Conductor Foil shielding protects against (EMI) & (RFI) 50u” Gold Plated on the plug Contacts Temperature Range: -20°C to +75°C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B

FrequencyMHz

AttenuationDb/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

100 19.8 44.3 24.5 42.3 27.8 24.8 20.1

200 29.0 39.8 10.8 37.8 21.8 18.8 18.0

250 32.8 38.3 5.5 36.3 19.8 16.8 17.3


Length White Blue Green Red Dark Gray

0.5M NB-COP-211 NB-COP-212 NB-COP-213 NB-COP-214 NB-COP-215

1M NB-COP-126 NB-COP-130 NB-COP-134 NB-COP-138 NB-COP-142





www.netboxwll.com

15


AT

.6 FT

P C

AB

LIN

G S

YS

TE

M

Cat.6 24port FTP Patch Panel


24-port 1U patch panel, Cat6 FTP type. ETL tested & verified CAT6 channel performance Cable management and grounding devices are combined in

this patch panel. According to the standard of ISO/IEC 11801:2002 CLASS E

and ANSI/TIA/EIA/568B.2-1 Cat6 Standard.

Universal wiring, panels are supplied with labeling for both T568A and T568B.

Connecting: FCC port for Cat6 FTP patch cord and IDC for horizontal distribution in the cables.

110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor

bronze pins; Shielding shell of RJ45 jack; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins.





Housing material: PBT + 15% GF UL94V-0 Panel Frame: ZN Plating, then powder coated Contact material: PC UL94V-0 contact, Phosphor bronze

with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-042 24 port FTP Cat. 6 patch panel, 1U, 110 & Krone Dual Type

www.netboxwll.com

16


AT

.6 F

TP

CA

BL

ING

SY

ST

EM

Keystone Jack (Cat6 FTP)


Shielded KJ. The products are used in the equipment rooms & work area as communication connectors of the intelligent buildings.

The product can resist the Electro Magnetic Interference (EMI) effectively with the compact full-closed shielding structure.

According to the requirement of T568A & T568B, the T568A & T568B labels are stuck on both sides of the product to give an exact guide.

Connecting: RJ45 port for FTP patch cord and the IDC port for FTP horizontal cabling.

According to the ROHS requirement. Inserting Duration: 750 times. Punching Duration: 250 times. Testing condition of transmitting capability; 250MHz.

Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms Min @ 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min CAT6 Permanent Link: Conform to ANSI/TIA/EIA-568 B.2-1


Storage: -40°C to +85°C Operation: 0°C to 70°C Mates with modular plug conforming to FCC Part 68,

Subpart F.

Shield Material: Brass T=0.30mm Nickel Plating Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm Nickel

Plating Wire: AWG 24-26



NB-COP-055 Cat.6 110/ krone Right-angle (90º) Keystone Jack, T568A/B, FTP

NB-COP-094 Cat.6 110/ krone Vertical (180º) Keystone Jack, T568A/B, FTP

Cat.6 FTP RJ45 Plug


Housing: Polycarbonate Contact: Copper alloy 50u”gold plated over nickel 24-26 AWG stranded & solid wire Durability: 750 cycles Min. Exceed category 6 specifications Use with the universal RJ crimp tool

NB-COP-094NB-COP-055

P/N: NB-COP-095

www.netboxwll.com

17


AT

.5E U

TP

CA

BL

ING

SY

ST

EM

Cat. 5E UTP 100 MHz Solid Cable


10BASE-T/100BASE-TX/1000BASE-T 55-Mbps/155-Mbps & 622-Mbps ATM 4-Mbps/16-Mbps Token Ring 100-Mbps TP-PMD ISDN

Verified to TIA/EIA 568B.2-1 UL Listed ISO/IEC 11801 IEC 332-1


305m(1,000ft) pull Box 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.20 Insulation Dia (±0.03mm): 0.91 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 5.1mm Average jacket thickness : 0.5mm Weight: 10kg/305m Minimum bend radius: O.D.*4 - 6 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +75°C

1.0-100.0 MHz Impedance: 100± 15 ohms 1.0-100.0 MHz Impedance Delay scew≤45 Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance 20% (ohms/km) ≤93.8 Resistance unbalance (5%) Test object: jacket Test material: PVC Before tensile strength (Mpa) ≥13.8 Aging Elongation (%): ≥ 100 Aging condition (ºCxhrs): 100x240 After tensile strength (Mpa): ≥85% of unaged Aging elongation (%): ≥50% of unaged Cold bend (-20±2 ºCx 4hrs): no crock


Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 65.3 63.0 62.3 63.8 60.8 20.0

4.0 4.1 56.3 52.0 53.3 51.7 48.7 23.0

8.0 5.8 51.8 46.0 48.8 45.7 42.7 24.5

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

16.0 8.2 47.3 39.0 44.3 39.7 36.7 25.0

20.0 9.3 45.8 37.0 42.8 37.7 34.7 25.0

25.0 10.4 44.3 34.0 41.3 35.8 32.8 24.3

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1

Color PVC LSZH CMR

White NB-COP-008 NB-COP-008-LSOH NB-COP-008-CMR

Gray NB-COP-007 NB-COP-007-LSOH NB-COP-007-CMR







www.netboxwll.com

18


AT

.5E

UT

P C

AB

LIN

G S

YS

TE

M

Cat. 5E UTP 100 MHz Solid Cable (Outdoor Grade)





305m(1,000ft) Reel 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.20 Insulation Dia (±0.03mm): 1.0mm Overall PE jacket (RoHS) Outer diameter (±1.0mm): 5.4mm Average jacket thickness : 0.5mm Weight: 12kg/305m Minimum bend radius: O.D.*4 - 6 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +85°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 65.3 63.0 62.3 63.8 60.8 20.0

4.0 4.1 56.3 52.0 53.3 51.7 48.7 23.0

8.0 5.8 51.8 46.0 48.8 45.7 42.7 24.5

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

16.0 8.2 47.3 39.0 44.3 39.7 36.7 25.0

20.0 9.3 45.8 37.0 42.8 37.7 34.7 25.0

25.0 10.4 44.3 34.0 41.3 35.8 32.8 24.3

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1

Color P/N

Black NB-COP-170

www.netboxwll.com

19


AT

.5E U

TP

CA

BL

ING

SY

ST

EM

Cat.5E 100-MHz, 4 Pair UTP Patch Cords


10Base-T Ethernet (IEEE802.3) Fast Ethernet (IEEE 802.3u) ATM 155 Token Ring TP-PMD Audio 1000Base-T Voice



24 AWG Stranded Copper Conductor 50u” Gold Plated on the plug Contacts Temperature Range: -20°C to +75°C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B

FrequencyMHz

AttenuationDb/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1


Length White Blue Green Red Gray





www.netboxwll.com

20


AT

.5E

UT

P C

AB

LIN

G S

YS

TE

M

Cat.5e 100-MHz UTP Patch Panel


24-port 1U / 48-port 2U patch panels, Cat5e UTP type. The structure of each port of this patch panel is same which

makes sure that the performance of each port is consistent. Combined cable management bar. Universal wiring, panels are supplied with labeling for both

T568A and T568B. 110 and Krone dual type IDC termination. Use in 100MHz applications.



Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68,

Sub part F.

Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with

nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-045 24 port Unshielded Cat. 5E patch panel, Colored

NB-COP-043 24 port Unshielded Cat. 5E patch panel with Rear cable management bar

NB-COP-044 48 port Unshielded Cat. 5E patch panel with Rear cable management bar

24 Port Patch Panel

48 Port Patch Panel

Rear Cable Management Bar

www.netboxwll.com

21


AT

.5E U

TP

CA

BL

ING

SY

ST

EM

Cat5e UTP Keystone Jack


Keystone jack, Cat5e class, UTP Type, fit for connecting application of communication ports in working area.

Inserting duration: 750 times. Punching duration: 250 times. Testing condition of transmitting capability: 100MHz.



Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to TIA/EIA 568B Category 5e

Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with Nickel


Cat.5e UTP RJ45 Plug


Housing: Polycarbonate Contact: Copper alloy 50u”gold plated over nickel 24-26 AWG stranded & solid wire Durability: 750 cycles Min. Meet or exceed Cat5e specifications Use with the universal RJ crimp tool

NB-COP-057

P/N: NB-COP-060

www.netboxwll.com

22


AT

.5E

FT

P C

AB

LIN

G S

YS

TE

M

Cat. 5E FTP 100 MHz Solid Cable





305m(1,000ft) pull Box 100% Aluminum foil tape screen 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.25 Insulation Dia (±0.03mm): 1.0 Overall PVC jacket, LSOH & CMR on request (RoHS) Outer diameter (±1.0mm): 5.1mm Average jacket thickness : 0.5mm Weight: 11kg/305m Minimum bend radius: O.D.*6 - 8 Maximum pulling tension: 10Kg Choice of colors Flame Rating: CM, CMR, LSZH Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +75°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 65.3 63.0 62.3 63.8 60.8 20.0

4.0 4.1 56.3 52.0 53.3 51.7 48.7 23.0

8.0 5.8 51.8 46.0 48.8 45.7 42.7 24.5

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

16.0 8.2 47.3 39.0 44.3 39.7 36.7 25.0

20.0 9.3 45.8 37.0 42.8 37.7 34.7 25.0

25.0 10.4 44.3 34.0 41.3 35.8 32.8 24.3

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1

Color PVC LSZH CMR

Dark Gray NB-COP-083 NB-COP-083-LSOH NB-COP-083-CMR







White NB-COP-009 NB-COP-009-LSOH NB-COP-009-CMR

www.netboxwll.com

23


AT

.5E F

TP

CA

BL

ING

SY

ST

EM

Cat. 5E FTP 100 MHz Solid Cable (Outdoor Grade)





305m(1,000ft) Reel 100% Aluminum foil tape screen 24 AWG Solid Bare Copper Conductor (0.51mm) 4 Pairs, PE Insulation, Average thickness (±0.03mm): 0.25 Insulation Dia (±0.03mm): 1.0 Overall PE jacket (RoHS) Outer diameter (±1.0mm): 5.4mm Average jacket thickness : 0.5mm Weight: 11kg/305m Minimum bend radius: O.D.*6 - 8 Maximum pulling tension: 10Kg Twisting lay length (mm): 30 underneath Rip cord Temperature Range: -20°C to +85°C



Frequency MHz

Attenuation Db/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

1.0 2.0 65.3 63.0 62.3 63.8 60.8 20.0

4.0 4.1 56.3 52.0 53.3 51.7 48.7 23.0

8.0 5.8 51.8 46.0 48.8 45.7 42.7 24.5

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

16.0 8.2 47.3 39.0 44.3 39.7 36.7 25.0

20.0 9.3 45.8 37.0 42.8 37.7 34.7 25.0

25.0 10.4 44.3 34.0 41.3 35.8 32.8 24.3

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1

Color P/N

Black NB-COP-172

www.netboxwll.com

24


AT

.5E

FT

P C

AB

LIN

G S

YS

TE

M

Cat.5E 100-MHz, 4 Pair FTP Patch Cords


10Base-T Ethernet (IEEE802.3) Fast Ethernet (IEEE 802.3u) ATM 155 Token Ring TP-PMD Audio 1000Base-T Voice



24 AWG Stranded Copper Conductor Foil shielding protects against (EMI) & (RFI) 50u” Gold Plated on the plug Contacts Temperature Range: -20°C to +75°C FR PVC jacket, LSOH on request 4 Pairs (FRPE Insulation) Molded Boots Choice of colors Wiring: T568B

FrequencyMHz

AttenuationDb/100m

NEXT db

ACR db/100m

P.Sum NEXT

db

EL-FEXT db/100m

PS EL-FEXT

Db/100m

RL db

10.0 6.5 50.3 44.0 47.3 43.8 40.8 25.0

31.25 11.7 42.9 31.0 39.9 33.9 30.9 23.6

62.5 17.0 38.4 21.0 35.4 27.8 24.8 21.5

100 22.0 35.3 13.0 32.3 23.8 20.8 20.1


Length White Blue Green Red Gray





Cat.5e FTP RJ45 Plug


Housing: Polycarbonate Contact: Copper alloy 50u”gold plated over nickel 24-26 AWG stranded & solid wire Durability: 750 cycles Min. Meet or exceed Cat5e specifications Use with the universal RJ crimp tool

P/N: NB-COP-061

www.netboxwll.com

25


AT

.5E F

TP

CA

BL

ING

SY

ST

EM

Cat.5E FTP Patch Panels


24-port 1U patch panel, Cat5e FTP type. Cable management and grounding devices are combined in this patch

panel. Universal wiring, panels are supplied with labeling for both T568A and

T568B. Connecting: FCC port for Cat5e FTP patch cord and IDC for horizontal

distribution in the cables. Compatibility: compatible for FTP Cat5e general cable distribution

systems. 110 and Krone dual type IDC termination. RJ45 jack Frame Material: PBT; golden plated phosphor bronze pins;

Shielding shell of Rj45 jack; Brass housing with nickel-plated; IDC clip; Tinned phosphor bronze pins.




Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68

Housing material: PBT + 15% GF UL94V-0 Panel Frame: S45C powder coating in black color Contact material: PC UL94V-0 Terminal, Phosphor bronze, TIN plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-046 24 port FTP Cat. 5E patch panel

Cat5E FTP Keystone Jack


Keystone jack, Cat5e class, FTP Type, fit for connecting application of communication ports in working area.

Inserting duration: 750 times. Punching duration: 250 times.

Testing condition of transmitting capability: 100MHz.



Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to TIA/EIA 568B Category 5e Mates with modular plug conforming to FCC Part 68, Subpart F.

Shield Material: Brass T=0.30mm Nickel Plating Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material : FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm Nickel Plating Wire: AWG 24-26



NB-COP-058 Cat.5e 110/ krone Right-angle (90º) Keystone Jack, T568A/B, FTP


www.netboxwll.com

26

STRUCTURED CABLING PRODUCTS S

TR

UC

TU

RE

D C

AB

LIN

G A

CC

ES

SO

RIE

S

86*86mm type face plate with shutter

(1 &2 port )

86*86mm type face plate with shutter

(1, 2 & 4 port )

86*86mm type face plate with shutter,

1 & 2 port, (Silver Plating)

114*70mm type face plate

(1, 2 & 4 port )

86*86mm type Angled face plate

(2 port )

LJ6C Low Profile Module

RJ45 Cable Relief Boots

White Orange Gray Blue Black Red Yellow Green

NB-COP-062 NB-COP-168 NB-COP-063 NB-COP-064 NB-COP-171 NB-COP-066 NB-COP-096 NB-COP-065

NB-COP-069 NB-COP-068 NB-COP-067NB-COP-192 NB-COP-193


NB-COP-070 NB-COP-071 NB-COP-072


NB-COP-075



TELECOM CABLING PRODUCTS

TELECOM 110 BLOCKS & JUMPER CABLES 40

TELECOM METAL CONNECTION BOXES 36 - 38

TELECOM PLASTIC CONNECTION BOXES & LSA BLOCKS 39

VERTICAL DISTRIBUTION FRAM 35

ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES 30 - 31

NON-ARMORED OUTDOOR JELLY FILLED COMMUNICATION CABLES 32 - 33

CAT.3 TELEPHONE PATCH PANEL & CAT.3 KEYSTONE JACK 34

CAT.3 UTP OUTDOOR CABLES 29

CAT.3 UTP INDOOR CABLES 28

www.netboxwll.com

28

TELECOM CABLING PRODUCTS C

AT

.3 U

TP

IND

OO

R C

AB

LE

S

Cat.3 UTP Indoor Cables

1.0-16.0 MHz Impedance: 100 ±15 ohms Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance unbalance (%)max 5.0 DC Resistance 20°C (ohm/100m) max 9.5 Test object: jacket Test material: PVC Before Aging tensile strength (Mpa) ≥13.5 Aging period (ºCxhrs): 100x24x10d Before Aging elongation (%): ≥350 After Aging elongation (%): ≥300 Cold bend (-20±2 ºCx 4hrs): no cracks

Cable construction:

Conductor Bare Solid Copper (0.5mm ±0.005mm)

Insulation HDPE (diameter: 0.87±0.02mm)

Test Standard TIA/EIA 568B & YD/T1019-2001

Outer Sheath PVC

Outer Sheath Thickness

1.0±0.2mm

Outer Sheath Diameter (mm)

2 pair 4 pair 10 pair 20 pair 25 pair 50 pair 100 pair

3.9 4.1 8.5 10 11 14.5 19

Packing Pull box (305 Mtr)

Pull box (305 Mtr)

Wooden Drum (500 Mtr)





Weight (Approx) 6 kg 9 kg 80 kg 90 kg 100 kg 170 kg 300 kg

Technical performance (100m):

FREQUENCY MHz

ATT (≤dB)

RL (≥dB) DELAY (≤ns) NEXT (≥dB) PSNEXT (≥dB) ELFEXT (≥dB) PSELFEXT

(≥dB)

1.0 2.6 12.0 570.00 41.3 41.3 39.0 39.0

4.0 5.6 12.0 552.00 32.3 32.3 26.9 26.9

8.0 8.5 12.0 546.73 27.8 27.8 20.9 20.9

10.0 9.7 12.0 545.38 26.3 26.3 19.0 19.0

16.0 13.1 9.95 543.00 23.3 23.3 14.9 14.9


No. of pairs PVC LSZH

2 NB-COP-195 NB-COP-195-LSOH







PVC Outer Sheath

Rip-cord

Polyester

No. of pairs

25

25

25

25

www.netboxwll.com

29


AT

.3 UT

P O

UT

DO

OR

CA

BL

ES

Cat.3 UTP Outdoor Cables

1.0-16.0 MHz Impedance: 100 ±15 ohms Pair to ground capacitance unbalance (PF/100m) 330Max Conductor DC resistance unbalance (%)max 5.0 DC Resistance 20°C (ohm/100m) max 9.5 Test object: jacket Test material: PE Before Aging tensile strength (Mpa) ≥13.5 Aging period (ºCxhrs): 100x24x10d Before Aging elongation (%): ≥350 After Aging elongation (%): ≥300 Cold bend (-20±2 ºCx 4hrs): no cracks

Cable construction:

Conductor Bare Solid Copper (0.5mm ±0.005mm)

Insulation HDPE (diameter: 0.87±0.02mm)

Test Standard TIA/EIA 568B & YD/T1019-2001

Outer Sheath Black LDPE

Outer Sheath Thickness 1.0±0.2mm

Outer Sheath Diameter (mm) 25 pair 50 pair 100 pair

11.6 ±0.8 15.2 ±0.8 20.4 ±0.3

Packing Wooden Drum (500 Mtr) Wooden Drum (500 Mtr) Wooden Drum (500 Mtr)

Weight (Approx) 105 kg 180 kg 315 kg

Technical performance (100m):

FREQUENCY MHz

ATT (≤dB)

RL (≥dB) DELAY (≤ns) NEXT (≥dB) PSNEXT (≥dB) ELFEXT (≥dB) PSELFEXT

(≥dB)

1.0 2.6 12.0 570.00 41.3 41.3 39.0 39.0

4.0 5.6 12.0 552.00 32.3 32.3 26.9 26.9

8.0 8.5 12.0 546.73 27.8 27.8 20.9 20.9

10.0 9.7 12.0 545.38 26.3 26.3 19.0 19.0

16.0 13.1 9.95 543.00 23.3 23.3 14.9 14.9


No. of pairs P/N (PE Outer Sheath)

2 NB-COP-195-PE

4 NB-COP-196-PE

10 NB-COP-194-PE

20 NB-COP-227-PE

25 NB-COP-087-PE

50 NB-COP-088-PE

100 NB-COP-089-PE

PE Outer Sheath

Rip-cord

Polyester

No. of pairs

2525

25

25

Waterproof tape

www.netboxwll.com

30

TELECOM CABLING PRODUCTS A

RM

OR

ED

OU

TD

OO

R J

EL

LY

FIL

LE

D C

OM

MU

NIC

AT

ION

CA

BL

ES

Armored Outdoor Jelly Filled Communication Cables

Cable construction:

Conductor Bare Solid Copper (0.6mm)

Insulation Solid HDPE

Twisting Two single wires twisted

Standard reference Comply to YD/T322-1996

Cable core Each unit wrapped with double-color tape to form cable core

Filler Jelly filled in the cable core

Cable core wrapping Polyester wrapping tape, and then water blocking tape wrapping. Both helically wrapped.

Armouring Corrugated steel tape

Shield screeen 0.25mm thickness aluminium tape with plastic cover on both sides, longitude wrapped


Outer Sheath Diameter (mm) 50 pair 100 pair 200 pair 300 pair

26.5 33.5 43.0 50.0

Weight (Approx)/km 1170kg 1810kg 2900kg 3990kg

Volume / Drum/1000Mtrs 180x80x75cm 180x80x115cm 220x110x115cm 240x120x115cm

Inner jacket Black PE

Cable core and jacket thickness:

Pairs Cable Construction

Inside Jacket thickness(mm) Outside Jacket thickness(mm) First layer Second layer

50 2*(12+13) pair 1.2 1.8

100 25 pair*4 1.2 1.8

200 25 pair*1 25 pair*7 1.2 1.8

300 25 pair*3 25 pair*9 1.2 2.0

LDPE outer sheath

Corrugated steel tape

Waterproof tape

Filling compound

Co-polyester coated Aluminium tape

No. of pairs

Polyester

Inner Jacket

13 12

12 13

50 Pair construction

25 25

25 25

25

25

25 25


25

25

25

25

25

25

25

25

25

25

25 25


25 25

25 25


www.netboxwll.com

31

TELECOM CABLING PRODUCTS A

RM

OR

ED

OU

TD

OO

R JE

LL

Y F

ILL

ED

CO

MM

UN

ICA

TIO

N C

AB

LE

S

Armored Outdoor Jelly Filled Communication Cables

Electrical characteristics:

Test Items Indicators

0.6 mm conductor Dirrect Current Resistance of single conductor (Max) ohm/km 65.3 ohm/km Imbalance of Direct Current Resistance(Max) 5% Insulation resistance of each single insulated conductor to other shield or connected to the earth DC 500 V >3000M·ohm/km Working Capacitance(800Khz/km) Max. 10p <=58nF/km Pair to Pair Capacitance(800Hz/300m) Max <=250 pF/km Electric Strength DC Time of Inputing Power Conductor to conductor Conductor to Shield

1 minute 1000 V 3000 V

Insulation color code:

Pair No. Colour Code Pair No. Colour Code 1 White/Blue 14 Black/Brown 2 White/Orange 15 Black/Gray 3 White/Green 16 Yellow/Blue 4 White/Brown 17 Yellow/Orange 5 White/Gray 18 Yellow/Green 6 Red/Blue 19 Yellow/Brown 7 Red/Orange 20 Yellow/Gray 8 Red/Green 21 Purple/Blue 9 Red/Brown 22 Purple/Orange

10 Red/Gray 23 Purple/Green 11 Black/Blue 24 Purple/Brown 12 Black/Orange 25 Purple/Gray 13 Black/Green

Ties chromatography:

50 pair 100 pair 200 pair 300 pair Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code

1 12 White/Blue 1 25 White/Blue 1 25 White/Blue 1 25 White/Blue 2 13 White/Blue 2 25 White/Orange 2 25 White/Orange 2 25 White/Orange 3 12 White/Orange 3 25 White/Green 3 25 White/Green 3 25 White/Green 4 13 White/Orange 4 25 White/Brown 4 25 White/Brown 4 25 White/Brown 5 25 White/Gray 5 25 White/Gray 6 25 Red/Blue 6 25 Red/Blue 7 25 Red/Orange 7 25 Red/Orange 8 25 Red/Green 8 25 Red/Green 9 25 Red/Brown 10 25 Red/Gray 11 25 Black/Blue 12 25 Black/Orange

No. of pairs P/N

50 NB-COP-231-RGD

100 NB-COP-232-RGD

200 NB-COP-233-RGD

300 NB-COP-234-RGD

www.netboxwll.com

32

TELECOM CABLING PRODUCTS N

ON

-AR

MO

RE

D O

UT

DO

OR

JE

LL

Y F

ILL

ED

CO

MM

UN

ICA

TIO

N C

AB

LE

S

Non-Armored Outdoor Jelly Filled Communication Cables

Cable construction:

Conductor Bare Solid Copper (0.6mm)

Insulation Solid HDPE

Twisting Two single wires twisted

Standard reference Comply to YD/T322-1996

Cable core Each unit wrapped with double-color tape to form cable core

Filler Jelly filled in the cable core

Cable core wrapping Polyester wrapping tape, and then water blocking tape wrapping. Both helically wrapped.

Shield screeen 0.25mm thickness aluminium tape with plastic cover on both sides, longitude wrapped


Outer Sheath Diameter (mm) 50 pair 100 pair 200 pair 300 pair

21.0 28.5 38.5 46.0

Weight (Approx)/km 620kg 1480kg 2410kg 3350kg

Volume / Drum/1000Mtrs 130x50x75cm 160x80x115cm 200x100x115cm 220x110x115cm

Cable core and jacket thickness:

Pairs Cable Construction

Min. Jacket thickness(mm) First layer Second layer

50 2*(12+13) pair 1.4

100 25 pair*4 1.6

200 25 pair*1 25 pair*7 1.8

300 25 pair*3 25 pair*9 2.0

LDPE outer sheath

Waterproof tape

Filling compound

Co-polyester coated Aluminium tape

No. of pairs

Polyester


25 25

25 25


25

25

25 25

25 25

25 25

25 25

25

25


25

25

25

25

25

25

25

25

25

25

25 25


13 12

12 13

www.netboxwll.com

33

TELECOM CABLING PRODUCTS NO

N-A

RM

OR

ED

OU

TD

OO

R JE

LL

Y F

ILL

ED

CO

MM

UN

ICA

TIO

N C

AB

LE

S

Non-Armored Outdoor Jelly Filled Communication Cables

Electrical characteristics:

Test Items Indicators

0.6 mm conductor Dirrect Current Resistance of single conductor (Max) ohm/km 65.3 ohm/km Imbalance of Direct Current Resistance(Max) 5% Insulation resistance of each single insulated conductor to other shield or connected to the earth DC 500 V >3000M·ohm/km Working Capacitance(800Khz/km) Max. 10p <=58nF/km Pair to Pair Capacitance(800Hz/300m) Max <=250 pF/km Electric Strength DC Time of Inputing Power Conductor to conductor Conductor to Shield

1 minute 1000 V 3000 V

Insulation color code:

Pair No. Colour Code Pair No. Colour Code 1 White/Blue 14 Black/Brown 2 White/Orange 15 Black/Gray 3 White/Green 16 Yellow/Blue 4 White/Brown 17 Yellow/Orange 5 White/Gray 18 Yellow/Green 6 Red/Blue 19 Yellow/Brown 7 Red/Orange 20 Yellow/Gray 8 Red/Green 21 Purple/Blue 9 Red/Brown 22 Purple/Orange

10 Red/Gray 23 Purple/Green 11 Black/Blue 24 Purple/Brown 12 Black/Orange 25 Purple/Gray 13 Black/Green

Ties chromatography:

50 pair 100 pair 200 pair 300 pair Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code Ties No Pairs Color Code

1 12 White/Blue 1 25 White/Blue 1 25 White/Blue 1 25 White/Blue 2 13 White/Blue 2 25 White/Orange 2 25 White/Orange 2 25 White/Orange 3 12 White/Orange 3 25 White/Green 3 25 White/Green 3 25 White/Green 4 13 White/Orange 4 25 White/Brown 4 25 White/Brown 4 25 White/Brown 5 25 White/Gray 5 25 White/Gray 6 25 Red/Blue 6 25 Red/Blue 7 25 Red/Orange 7 25 Red/Orange 8 25 Red/Green 8 25 Red/Green 9 25 Red/Brown 10 25 Red/Gray 11 25 Black/Blue 12 25 Black/Orange

No. of pairs P/N

50 NB-COP-231

100 NB-COP-232

200 NB-COP-233

300 NB-COP-234

www.netboxwll.com

34


AT

.3

TE

LE

PH

ON

E P

AT

CH

PA

NE

L &

CA

T.3

K

EY

ST

ON

E J

AC

K

Cat.3 Telephone Patch Panel

Electrical: Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms Min @ 500 VDC Dielectric strength: 750 VAC RMS 60Hz, 1Min

Environmental:

Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to ANSI/TIA/EIA 568B Category 3 Mates with modular plug conforming to FCC Part 68

Mechanical: Housing material: PBT + 15% GF UL94V-0 Panel Frame: Carbon steel, powder coating in black color Contact material: PC UL94V-0 contact, Phosphor bronze with nickel plating RJ45 Jack life: 750 Times Min IDC Life: 200 Times Min Wire: AWG 24-26


P/N Description

NB-COP-092 Cat. 3 Telephone patch panel, 25 port, Krone IDC

NB-COP-093 Cat. 3 Telephone patch panel, 50 port, Krone IDC

Cat.3 Keystone Jack


Keystone jack, Cat3 class, UTP Type, fit for connecting application of communication ports in working area.

Inserting duration: 750 times. Punching duration: 250 times.



Storage : -40°C to +85°C Operation: 0°C to 70°C Conform to ANSI/TIA/EIA 568B Category 3

Housing Material: PC UL94V-0 Insert Material: Flame Retardancy ABS UL94V-0 PCB Material: FR-4 Thickness: 1.6mm Contact Material: Phosphor bronze stamp pin T=0.35mm IDC Contact Material: Phosphor Bronze T=0.50mm with Nickel


NB-COP-197

www.netboxwll.com

35

TELECOM CABLING PRODUCTS V

ER

TIC

AL

DIS

TR

IBU

TIO

N F

RA

M

Vertical Distribution Frame

Modular diatribution frame, which can either be wall mounted or installed back-to back for free standing applications. These frames are available in single and double vertical versions. The following features are offered within the frame construction: High durable, rigid frame factory assembled from coated steel Back-mount frames manufactured from stainless steel Hard wearing, coated steel jumper rings, wire guids and fanning

strips for efficient cable management frame design allows easy access to top jumper rings

Fully earth bounded. Meeting IEC regulation Ordering Information:

P/N Description

NB-ACC- 050 Vertical Distribution Frame, 700 pair, Metal, Modules are not included

NB-ACC- 051 Vertical Distribution Frame, 1400 pair, Metal, Modules are not included

700 Pair

1400 Pair

www.netboxwll.com

36

TELECOM CABLING PRODUCTS T

EL

EC

OM

ME

TA

L C

ON

NE

CT

ION

BO

XE

S

Telecom Metal Connection Boxes

Cold Rolled Steel Color: RAL7035

100 Pair

200 Pair

www.netboxwll.com

37


EL

EC

OM

ME

TA

L C

ON

NE

CT

ION

BO

XE

S


340 Pair

680 Pair

www.netboxwll.com

38


EL

EC

OM

ME

TA

L C

ON

NE

CT

ION

BO

XE

S



P/N Description

NB-ACC- 056 100 pair Metal Box, Dimension: 450mmx280mmx150mm, Modules are not included

NB-ACC- 057 200 pair Metal Box, Dimension: 690mmx280mmx150mm, Modules are not included

NB-ACC- 053 340 pair cabinet, Dimension: 1100mmx280mmx150mm, Modules are not included

NB-ACC- 054 680 pair cabinet.Dimension: 1100mmx500mmx150mm, Modules are not included

NB-ACC-055 1200 pair cabinet.Dimension: 1100mmx720mmx150mm, Modules are not included

1200 Pair

www.netboxwll.com

39


EL

EC

OM

PL

AS

TIC

CO

NN

EC

TIO

N B

OX

ES

& L

SA

BL

OC

KS

Telecom Plastic Connection Boxes


P/N Description

NB-ACC-049 Telephone Distribution Box, 200 pair, Plastic, Modules are not included




Telecom LSA Blocks & Magazine

Housing Material: ABS UL94V-2 Base Material: ABS UL94V-2 Contact Thickness: 0.5mm Contact Material: Phosphor Bronze Plating Over Nickel Over Silver Wire Sizes AWG: 24 - 26


P/N Description

NB-ACC-025 Disconnecting Plug, Red color

NB-ACC-041 Single Protective Unit

NB-ACC-022 Connection Module, 10 pair

NB-ACC-029 10 pair Magazine, 3 pole Arrester loaded

NB-ACC-023 Disconnection Module, 10 pair

NB-ACC-052 Label Holder for 10 Pair Module

30 Pair

100 Pair

50 Pair

200 Pair

NB-ACC-029

NB-ACC-023 NB-ACC-025

NB-ACC-022

NB-ACC-052

www.netboxwll.com

40


EL

EC

OM

110

BL

OC

KS

& J

UM

PE

R C

AB

LE

S

Telecom 110 Blocks

Voltage rating: 125 VAC RMS Current rating: 1.5 AMP Contact resistance: 100 Milliohms Max Insulation resistance: 1000 Megohms Min @ 500 VDC Dielectric strength: 750 VAC RMS 60HZ, 1Min Material: PC UL94V-0 Terminals material: Phosphor bronze T: 0.8mm Wire: AWG 24 ~ 26


P/N Description

NB-ACC-037 110 Wiring Block, 50 pair

NB-ACC-038 110 Wiring Block, 100 pair

NB-ACC-039 Plastic Cable Manager with Legs

One Pair Jumper Cable

Specification:

Conductor diameter: 0.50mm 400 & 500 mtrs/roll 100% Oxygen Free highly pure copper, annealed high conductivity Insulation thickness : 0.27mm Jacket material : 100% Virgin Solid Polythene or PVC Diameter Over Insulation : 1.04mm Twisted Pair Lay Length : 50mm (Mutual Capacitance is 45Nf/Km) Coil in Small Plastic Drum and packed in cartons Choice of colors


Color Green/White (400M) Blue/Yellow (400M) Red/White (500M) Blue/White (500M)

P/N NB-COP-150 NB-COP-177 NB-COP-228 NB-COP-178

NB-COP-177

NB-ACC-039 NB-ACC-038

NB-COP-150




FIBER OPTIC PRODUCTS

OUTDOOR FIBER OPTIC SPLICE CLOSURES (FOSC) 76 - 80

FIBER OPTIC ADAPTERS/CONNECTORS/ATTENUATORS 73 - 74

FIBER OPTIC SPLICING ACCESSORIES 75

FIBER OPTIC ODF & ORGANIZER 72

FIBER OPTIC PATCH CORDS & PIGTAILS 60 - 67

MULTI-FIBER PRE-TERMINATED FIBER OPTIC CABLES 68

FIBER OPTIC PATCH PANELS 69 - 71

FIBER OPTIC CABLES 42 - 59

www.netboxwll.com

42

FIBER OPTIC PRODUCTS F

IBE

R O

PT

IC C

AB

LE

S

In-door Simplex & Duplex Optical Fiber Cables

Application: The interconnected cable contains double tight buffered fibers that are used as ideal cables of fiber to the workstation, patch cable in the closet, pigtails, patch cord, closet to the fetching port, fetching port to transceiver with their flexible tight buffer and high tensile aramid yarns armored.

Features: Small bending radius, light weight. High flexible, small coiling trail. Easy to install and terminate. Flame retardant or LSZH outer sheath

provides optimum safety features. Directly terminated with standard connectors

with physical protection.

Cable Data: Fiber Count Simplex Duplex

Outer Diameter D*H(mm) 2.0 3.0 1.6*3.3 2.0*4.1 2.8*5.7

Nominal Weight (kg/km) 3.5 6.8 5.7 8.2 13.2

Max. Tensile strength (N) Short-term 100N 150N 160N 200N 300N

Long-term 60N 80N 80N 100N 160N

Max. Crushing Resistance Short-term 1000N/100mm²

Long-term 300N/100mm²

Min. Bending Radius (mm) Dynamic 20D mm

Static 10D mm

Tight buffered characteristic OD:0.87±0.05mm, Thickness: 0.31±0.02mm

Temperature Range (ºC) -20 ºC - +60 ºC

Singlemode fiber Characteristics:

Attenuation 1310nm ≤0.4 dB/km

1550nm ≤0.3 dB/km

Dispersion 1285~1330nm ≤3.5 Ps/nm.km

1550nm ≤18.0 Ps/nm.km

Zero dispersion wavelength 1300~1324 Nm

Zero dispersion slope ≤0.095 Ps/nm.km

Fiber cutoff wavelength ≤1260 Nm

Mode field diameter 8.6±0.5 um

Mode field concentricity <=0.8 um

Cladding diameter 125±1.0 um

Cladding non-circularity ≤1.0 %

Coating/cladding concentricity error ≤12.5 um

Coating diameter 245±10 um

Bending dependence Induced attenuation(1550 nm) 1 turn, 32mm diameter ≤0.50 db

100 turns, 60mm diameter ≤0.50 db

Proof Test (offline) ≥100 kpsi

Multi mode fiber Characteristics:


1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km





Bending dependence Induced attenuation 100 turns, 75mm diameter ≤0.50 db at 850 nm\1300 nm



ITEM 125/9 SM 125/50 MM 125/62.5 MM

Simplex 2.0 mm NB-FOCA-073 NB-FOCA-075 NB-FOCA-074

Simplex 3.0 mm NB-FOCA-004 NB-FOCA-006 NB-FOCA-005

Duplex 1.6x3.3 mm NB-FOCA-107 NB-FOCA-108 NB-FOCA-109

Duplex 2.0x4.1mm NB-FOCA-070 NB-FOCA-071 NB-FOCA-072

Duplex 2.8x5.7mm NB-FOCA-001 NB-FOCA-002 NB-FOCA-003

Aramid yarn

Tight buffer fiber

Sheath

Simplex Duplex

www.netboxwll.com

43


IBE

R O

PT

IC C

AB

LE

S

In-door Distribution-Style Tight buffered Optical Fiber Cables

Application: These cables contains multiple tight buffers that are used as distribution cables of entrance equipment, equipment room, computer room to the closet, especially suitable for horizontal installation in building. Features:

Up to 24 tight buffer fibers Small bending radius, light weight. Metal free construction makes it immune to

radio interference and electromagnetic interference. High flexible, small coiling trail. Aramid yarn for round strength Easy to install and terminate. Flame retardant or LSOH outer sheath provides

optimum safety features. Easy splicing.

Cable Data: Fiber Count 4 6 8 12 24 36 48

Outer Diameter D*H(mm) 4.8 ±0.2 5.2 ±0.2 6.2 ±0.2 6.8 ±0.3 8.4 ±0.5 10.5 ±0.5 12.5 ±0.5

Nominal Weight (kg/km) 19 25 29 39 65 110 138

Max. Tensile strength (N) Short-term 270N 330N 480N 600N 720N 1000N 1600N

Long-term 90N 110N 160N 200N 240N 330N 520N




Static 10D mm





1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km















1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km








ITEM 125/9 SM 125/50 MM 125/62.5 MM

C4 (LSZH) NB-FOCA-007 NB-FOCA-008 NB-FOCA-009




24C (LSZH) NB-FOCA-020 NB-FOCA-021 NB-FOCA-022



Outer jacket

Tight buffer fiber

Kevlar

www.netboxwll.com

44


IBE

R O

PT

IC C

AB

LE

S

10-Gigabit Multimode (OM3), 50-Micron In-door Distribution-Style Tight buffered Optical

Fiber Cable

Application: These cables contains multiple tight buffers that are used as distribution cables of entrance equipment, equipment room, computer room to

the closet, especially suitable for horizontal installation in building. Used in multi-gigabit Ethernet environments to patch and connect cabling systems

Features:

Up to 48 tight buffer Fibers Small bending radius, light weight. Metal free construction makes it immune to radio

interference and electromagnetic interference. High flexible, small coiling trail. Easy to install and terminate.

Provide 10-Gig performance (at 850 nm), up to 300 meters Backwords compatible to lower speed applications Compatible with 10Mb/100Mb/1Gb/10Gb transceivers Compliant with TIA/EIA-568-B.3 Core: 50 µm, Cladding: 125 µm, Buffer: 900 µm Jacket: LSZH, Aqua fiber optic cable

Cable Data: Fiber Count 4 6 8 12 24 36 48

Outer Diameter D*H(mm) 4.8 ±0.2 5.2 ±0.2 6.2 ±0.2 6.8 ±0.3 8.4 ±0.5 10.5 ±0.5 12.5 ±0.5

Nominal Weight (kg/km) 19 25 29 39 65 110 138

Max. Tensile strength (N) Short-term 270N 330N 480N 600N 720N 1000N 1600N

Long-term 90N 110N 160N 200N 240N 330N 520N




Static 10D mm




ITEM 125/50 MM OM3 MaxBand 300 C4 NB-FOCA-116

6C NB-FOCA-078 8C NB-FOCA-093

12C NB-FOCA-079 24C NB-FOCA-080 36C NB-FOCA-117 48C NB-FOCA-118

Outer jacket

Tight buffer fiber

Kevlar

www.netboxwll.com

45


IBE

R O

PT

IC C

AB

LE

S

10-Gigabit Multimode (OM3), 50-Micron In-door Distribution-Style Tight buffered Optical

Fiber Cable

10G MaxBand 300 fiber Characteristics: Characteristics Conditions Specified Values

Optical Characteristics

Attenuation 850nm ≤2.5 dB / km

1300nm ≤0.7 dB / km

Overfilled Modal Bandwidth 850nm ≥1500 MHz · km

1300nm ≥500 MHz · km

Effective Modal Bandwidth 850nm ≥2000 MHz · km

10 Gb/s Ethernet link distance SX 850nm ≤300 m

Differential Mode Delay Note: A minimum, effective system mode bandwidth length product of 2000 MHz · km is achieved when combining this 50/125 μ m fiber with transmitters meeting the following transmitter power, power distribution (per FOTP-203): Flux at radius 19 μ m:≥86%. (Ref: TIA-492AAAC)

850nm

Anyone of the following template [ps/m]: DMD DMD Inner Mask DMD Outer Mask Templates (Radius 5~18μ m) (Radius 0~23μ m) 1 ≤0.33 ≤0.33 2 ≤0.27 ≤0.35 3 ≤0.26 ≤0.40 4 ≤0.25 ≤0.50 5 ≤0.24 ≤0.60 6 ≤0.23 ≤0.70

Numerical Aperture (NA) 0.200±0.015

Group index of refraction (typical) 850nm 1.482

1300nm 1.477

Zero dispersion wavelength ≥1295 ≤1320

Zero dispersion lope 1295 ~ 1300nm ≤0.001(λ0~1190) ps / (nm² · km)

1300 ~ 1320nm ≤0.11 ps / (nm² · km)]

Backscatter characteristics 1300nm 0.200±0.015

Step (Mean of bidirectional measurement) ≤0.10 dB

Irregularities over fiber length and point discontinuity ≤0.10 dB

Difference backscatter coefficient (bidirectional measurement) ≤0.08 dB / km

Geometrical Characteristics

Core diameter 50±2.5 µ m

Core non-circularity ≤6.0%

Cladding Diameter 125.0±1.0 µ m

Cladding non-circularity ≤1.0%

Coating diameter 242±7 µ m

Coating/cladding concentricity error ≤12.0 µ m

Coating non-circularity ≤6.0%

Core/cladding concentricity error ≤1.5 µ m

Environmental Characteristics 850 nm, 1300 nm

Temperature Dependence Induced attenuation -60°C to +85°C

≤0.10 dB / km

Temperature – humidity cycling Induced attenuation -10°C to +85°, 90%R.H

≤0.20 dB / km

Damp heat Induced attenuation 85°C, 85%R.H.,30Days

≤0.20 dB / km

Watersoak dependence Induced attenuation 20°C for 30 Days ≤0.20 dB / km

Mechanical Characteristics

Proof Test

off line ≥9.0N ≥1.0% ≥100 KPSI

Bending dependence 850 nm, 1300 nm 100 turns, 75mm diameter

≤0.50 dB

Coating Strip force Typical average force Peak Force

1.7 N ≥1.3 ≤8.9 N

Dynamic stress corrosion susceptibility parameter (nd, Typical) ≥27

www.netboxwll.com

46


IBE

R O

PT

IC C

AB

LE

S

Ruggedized In-door Distribution-Style Tight buffered Optical Fiber Cables

Application: Ideal for use in vertical cabling of buildings and LAN Ideal for use in tails of backbone network, and connect from outdoors to indoors directly

Features:

Up to 12 0.9mmTight buffer Convenience for connection and construction

High intensity and light weight Provide UV protection, waterproof, mouse-biting proof

and mould proof, no cleft under stress, adapt to the environment for high fire rating

Cable Data: Fiber Count 4 6 8 12

Outer Diameter D*H(mm) 6.4 ±0.1 6.4 ±0.1 7.4 ±0.1 7.4 ±0.1

Nominal Weight (kg/km) 65 65 75 75

Max. Tensile strength (N) 800N

Max. Crushing Resistance 3000N/100mm²

Min. Bending Radius (mm) 65 65 75 75





1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km















1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







Tight buffer fiber

Metal braid

Metal tube

Inner jacket

Kevlar

Outer jacket

www.netboxwll.com

47


IBE

R O

PT

IC C

AB

LE

S

Ruggedized In-door Distribution-Style Tight buffered Optical Fiber Cables




1300nm ≤0.7 dB / km


1300nm ≥500 MHz · km




850nm




1300nm 1.477



1300 ~ 1320nm ≤0.11 ps / (nm² · km)]
















≤0.10 dB / km

Temperature – humidity cycling Induced attenuation -10°C to +85°, 90%R.H

≤0.20 dB / km

Damp heat Induced attenuation 85°C, 85%R.H.,30Days

≤0.20 dB / km



Proof Test



≤0.50 dB

Coating Strip force Typical averageforce Peak Force

1.7 N ≥1.3 ≤8.9 N


Ordering Information: ITEM SM 9/125 125/50 MM 125/50 MM OM3 MaxBand 300 125/62.5 MM

C4 (LSZH) NB-FOCA-007-RGD NB-FOCA-008-RGD NB-FOCA-116-RGD NB-FOCA-009-RGD




www.netboxwll.com

48


IBE

R O

PT

IC C

AB

LE

S

Outdoor / Indoor Loose-Tube (Centrally Bundled) Optical Fiber Cable

Application: The Minicables are suitable for installation in duct & aerial environment. They are also suitable for high voltage and low voltage crossing route.

Features: Up to 12 fibers

Non metallic construction providing excellent lightning strike resistance. Aramid yarns armor providing excellent strain performance. Flexible, light weight provides ease of installation.

Compact structure, super small outer diameter. Fiber protected by filling compound LSZH optional jacket

Cable Data:

Fiber Count 4 6 8 12

Outer Diameter D*H(mm) 8.3 ±0.3mm

Nominal Weight (kg/km) 42


Jacket Material & Thickness (mm) MDPE 1.5 mm

PBT Loose tube outer diameter (mm) 2.15mm ±0.10mm

Loose tube gel Waterproof gel

Package Wooden drum

Length per drum 2km/drum


Static 15D mm

Max. Tensile strength (N) Short-term 1500N

Long-term 800N




1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km















1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







PE Jacket

Aramid yarn

PBT loose tube

Fibers

Fiber filling compound

www.netboxwll.com

49


IBE

R O

PT

IC C

AB

LE

S

Outdoor / Indoor Loose-Tube (Centrally Bundled) Optical Fiber Cable




1300nm ≤0.7 dB / km


1300nm ≥500 MHz · km




850nm




1300nm 1.477



1300 ~ 1320nm ≤0.11 ps / (nm² · km)]
















≤0.10 dB / km

Temperature – humidity cycling Induced attenuation -10°C to +85°, 90%R.H ≤0.20 dB / km

Damp heat Induced attenuation 85°C, 85%R.H.,30Days ≤0.20 dB / km



Proof Test



≤0.50 dB


1.7 N ≥1.3 ≤8.9 N



ITEM 125/9 SM 125/50 MM 125/50 MM OM3 MaxBand 300 125/62.5 MM C4 023 -FOCA -NB 024 -FOCA -NB 024 -FOCA -NB -OM3 025 -FOCA -NB C6 026 -FOCA -NB 028 -FOCA -NB 028 -FOCA -NB -OM3 029 -FOCA -NB C8 030 -FOCA -NB NB-FOCA-031 NB-FOCA-031-OM3 032 -FOCA -NB C12 033 -FOCA -NB 034 -FOCA -NB 034 -FOCA -NB -OM3 035 -FOCA -NB

www.netboxwll.com

50


IBE

R O

PT

IC C

AB

LE

S

Armoured Loose-Tube (Centrally Bundled) Outdoor Optical Fiber Cable

Application: These central loose tube cables are suitable for installation in Duct, Direct buried & aerial environment for long haul communication, LAN. Features:

Up to 12 fibers Two parallel round steel wires enhance tensile strength Tension & crush resistance

Good mechanical performance Jacket with ultra violet resistance property Fiber protected by filling compound LSZH optional jacket

Cable Data:

Fiber Count 4 6 8 12

Outer Diameter D*H(mm) 8.3±0.15mm 9.0±0.15mm

Nominal Weight (kg/km) 66 82


Jacket Material & Thickness (mm) MDPE 1.5 mm

PBT Loose tube diameter (mm) 2.2mm ±0.10mm

Loose tube gel Waterproof gel

Package Wooden drum



Static 10D mm

Max. Tensile strength (N) Short-term 2500N

Long-term 800N




1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km













Multimode fiber Characteristics:


1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







PE Jacket

Water barrier

PBT loose

Optical Fibers

Fiber filling compound

Parallel steel wire strength member

Steel Polyethylene laminate

www.netboxwll.com

51


IBE

R O

PT

IC C

AB

LE

S

Armoured Loose-Tube (Centrally Bundled) Outdoor Optical Fiber Cable




1300nm ≤0.7 dB / km


1300nm ≥500 MHz · km




850nm




1300nm 1.477



1300 ~ 1320nm ≤0.11 ps / (nm² · km)]
















≤0.10 dB / km

Temperature – humidity cycling Induced attenuation -10°C to +85°, 90%R.H ≤0.20 dB / km

Damp heat Induced attenuation 85°C, 85%R.H.,30Days ≤0.20 dB / km



Proof Test



≤0.50 dB


1.7 N ≥1.3 ≤8.9 N



ITEM 125/9 SM 125/50 MM 125/50 MM OM3 MaxBand 300 125/62.5 MM

C4 NB-FOCA-045 NB-FOCA-046 NB-FOCA-046-OM3 NB-FOCA-047




www.netboxwll.com

52


IBE

R O

PT

IC C

AB

LE

S

Armored Direct Buried Double Sheath Loose Tube Optical fiber Cable

Application: These corrugated steel tape armored and double sheath cables are suitable for installation in harsh environments where mechanical impact on the cable is to be expected, e.g. direct buried application. They are also suitable for installation in ducts where the rodent resistance is to be expected

Features:

Up to 144 fibers High tensile strength, good performance on mechanical stress, crush resistance, temperature and transmission. High Young’s modulus phosphatized steel wire as central strength member, PE buffer extruded to outside of steel wire when necessary The loose tubes, cable core and all interstices filled with moisture-proof gel and compound, prevent water ingress longitudinally. The aluminum tape laminated on both sides with polyethylene and close bonded PE inner sheath possesses the function of radial moisture-

proof for the cable. Longitudinal water blocking tape at the inner side of the steel tape tightly bonded to the MDPE sheath ensures radial moisture proof and

reinforces mechanical crush resistance as well as prevents water ingress longitudinally. Corrugated steel tape armored and double PE sheath providing excellent crush resistance and rodent resistance.

Cable Data:

Fiber Count 2 - 60 62 - 72 74 - 96 98 - 120 122 - 144

Outer Diameter D*H(mm) 12.0±0.5mm 13.0±0.5mm 14.0±0.5mm 16.0±0.5mm 18.5±0.5mm

No. of tubes 5 6 8 10 12

Nominal Weight (kg/km) 145 196 230 270 360

Max. Tensile strength (N) Short-term 3000 3000 3000 3000 3000

Long-term 1000 1000 1000 1000 1000

Max. Crushing Resistance N/100mm²

Short-term 3000 3000 3000 3000 3000

Long-term 1000 1000 1000 1000 1000

Min. Bending Radius (mm) Dynamic 25D

Static 12.5D

Fiber Identification Blue,Orange,Green,Brown,Slate,White,Red,Black,Yellow,Violet,Pink,Aqua

Armouring Armoured steel tape (thickness: 1.5mm)

Central strength member Steel wire

Alluminium moisture barrier Yes

Loose tubes PBT loose tube, (Dia: 2.10mm ±0.15mm), (Nominal Thikness:0.3mm)

Loose Tube Identification Red, Green

Loose Tube Gel Asynthetic waterproof gel

Fillers Material Polyethylene

Inner Sheath Material & Thickness (mm) PE 1.0 mm

Outer Sheath Material & Thickness (mm) PE 1.5 mm

Package Wooden drum



PE outer sheath

Moisture barrier

Corrugated steel tape

PE Inner sheath

Central strength member

Loose tube filled with gel

Optical fiber

Filler

Water blocking tape

www.netboxwll.com

53


IBE

R O

PT

IC C

AB

LE

S


Singlemode (G.652B) fiber Characteristics:


1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km















1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







Singlemode (G.652D) fiber Characteristics: Characteristics Conditions Specified Values

Attenuation 1310 nm 1383 nm 1550 nm 1625 nm

≤0.34 dB / km ≤0.34 dB / km ≤0.20 dB / km ≤0.24 dB / km

Attenuation vs. Wavelength Max. a difference

1285-1340 nm 1525-1575 nm

≤0.03 dB / km ≤0.02 dB / km

Dispersion coefficient 1285-1340 nm 1550 nm 1625 nm

≥-3.0 ≤3.0 ps/(nm·km) ≤18 ps/(nm·km) ≤22 ps/(nm·km)

Zero Dispersion Slope Typical Value

≤0.090 ps/(nm²·km) 0.086 ps/(nm²·km)

PMD Maximum Individual Fiber Link Design Value (M=20, Q=0.01%) Typical Value

≤0.2 ps/√km ≤0.1 ps/√km 0.04 ps/√km

Cable cutoff wavelength λ cc ≤1260 nm Mode Field diameter (MFD) 1310 nm

1550 nm 9.2±0.4 μm 10.4± μm

Effective group index of refraction 1310 nm 1550 nm

1.466 1.467

Point of discontinuities 1310 nm 1550 nm

≤0.05 dB ≤0.05 dB

Geometrical Characteristics Cladding diameter 124.8±0.7 μm Cladding non-circularity ≤0.7% Coating diameter 245±5 μm Coating-cladding concentricity error ≤12.0 μm Coating non-circularity ≤6.0% Core-cladding concentricity error ≤0.5 μm Curl (radius) ≥4 m

www.netboxwll.com

54


IBE

R O

PT

IC C

AB

LE

S


Tactic Rule for Loose Tube and Fiber:

Number of Loose Tube

1 2 3 4 5 6 7 8 9 10 11 12

Fiber count

Red Green Nature Nature Nature Nature Nature Nature Nature Nature Nature Nature

2 ~ 12 Filler Filler Filler Filler Tube

14 ~ 24 Filler Filler Filler Tube Tube

26 ~ 36 Filler Filler Tube Tube Tube

38 ~ 48 Filler Tube Tube Tube Tube

50 ~ 60 Tube Tube Tube Tube Tube

62 ~ 72 Tube Tube Tube Tube Tube Tube

74 ~ 84 Filler Tube Tube Tube Tube Tube Tube Tube

86 ~ 96 Tube Tube Tube Tube Tube Tube Tube Tube

98 ~ 108 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube

110 ~ 120 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube

122 ~ 132 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube

134 ~ 144 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube


ITEM 125/9 SM (G652B) 125/9 SM (G652D) 125/50 MM 125/62.5 MM

12Core NB-FOCA-094 NB-FOCA-094-52D NB-FOCA-095 NB-FOCA-096







www.netboxwll.com

55


IBE

R O

PT

IC C

AB

LE

S

Outdoor Non-metallic Duct & Direct Buried Double Sheath Loose Tube Optical fiber

Cable

Features:

Up to 144 fibers The loose tube stranding technology make of the fibers have good secondary excess length and allow the fibers free movement in the tube,

which keeps the fiber stress-free while the cable is subjected to longitudinal stress. Non metallic construction providing excellent electric magnetic resistance and lightning resistance. Non metallic central member and yarns armored providing excellent strain performance.

Light weight, less additional load to tower

Cable Data:

Fiber Count 2 - 60 62 - 72 74 - 96 98 - 120 122 - 144

Outer Diameter D*H(mm) 11.5±0.5 12.5±0.5 13.5±0.5 15.5±0.5 18.5±0.5

No. of tubes 5 6 8 10 12

Nominal Weight (kg/km) 116 149 182 220 296

Max. Tensile strength (N) Short-term 2100 3000 3000 3000 3000

Long-term 700 1000 1000 1000 1000

Max. Crushing Resistance N/100mm²

Short-term 1200 1200 1200 1200 1200

Long-term 400 400 400 400 400

Min. Bending Radius (mm) Dynamic 20D

Static 10D

Fiber Identification Blue,Orange,Green,Brown,Slate,White,Red,Black,Yellow,Violet,Pink,Aqua

Central strength member FRP

Loose tubes PBT loose tube, (Dia: 2.10mm ±0.15mm), (Nominal Thikness:0.3mm)

Loose Tube Identification Red, Green

Loose Tube Gel Asynthetic waterproof gel

Fillers Material Polyethylene

Flooding Compound Water proof gel

Peripheral Strength Member Reinforcement yarns

Inner Sheath Material & Thickness (mm) PE 1.0 mm

Outer Sheath Material & Thickness (mm) PE 1.5 mm

Package Wooden drum



PE outer sheath

PE Inner sheath

Water blocking material

Reinforcement yarns

FRP Central strength member

Loose tube filled with gel

Optical fiber

Filler

Rip cord

Water blocking tape

www.netboxwll.com

56


IBE

R O

PT

IC C

AB

LE

S


Cable



1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km











1285-1340 nm 1525-1575 nm

≤0.03 dB / km ≤0.02 dB / km




≤0.090 ps/(nm²·km) 0.086 ps/(nm²·km)


≤0.2 ps/√km ≤0.1 ps/√km 0.04 ps/√km


1550 nm 9.2±0.4 μm 10.4± μm


1.466 1.467


≤0.05 dB ≤0.05 dB


www.netboxwll.com

57


IBE

R O

PT

IC C

AB

LE

S


Cable

Tactic Rule for Loose Tube and Fiber:

Number of Loose Tube

1 2 3 4 5 6 7 8 9 10 11 12

Fiber count

Red Green Nature Nature Nature Nature Nature Nature Nature Nature Nature Nature

2 ~ 12 Filler Filler Filler Filler Tube

14 ~ 24 Filler Filler Filler Tube Tube

26 ~ 36 Filler Filler Tube Tube Tube

38 ~ 48 Filler Tube Tube Tube Tube

50 ~ 60 Tube Tube Tube Tube Tube

62 ~ 72 Tube Tube Tube Tube Tube Tube

74 ~ 84 Filler Tube Tube Tube Tube Tube Tube Tube

86 ~ 96 Tube Tube Tube Tube Tube Tube Tube Tube

98 ~ 108 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube

110 ~ 120 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube

122 ~ 132 Filler Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube

134 ~ 144 Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube Tube


ITEM 125/9 SM (G652D) 125/50 MM 125/62.5 MM

4Core NB-FOCA-121-52D NB-FOCA-122 NB-FOCA-123










www.netboxwll.com

58


IBE

R O

PT

IC C

AB

LE

S

Stranded Loose tube Non-Armored Duct cable (Single jacket)

Description: NetBox Single Jacket, Non-Armored Stranded Loose tube cables are lightweight with small diameter and designed for duct and aerial installation. The loose tube design with a metallic strength member provides stable performance over a wide range and is compatible with any telecommunication grade optical fiber.

Cable Drawing

Features: Up to 288 fibers The loose tube stranding technology make of the fibers have good secondary excess length and allow the fibers free movement in the tube,

which keeps the fiber stress-free while the cable is subjected to longitudinal stress. Proven loose tube design allows for easy mid-span access and isolate fibers from installation and environmental rigors Dry core design for excellent water blocking performance and easier handling Fiber colors by IEC60304: Blue/Orange/Green/Brown/Grey/White/Red/Black/Yellow/Violet/Pink/Aqua Small diameter and lightweight. Polyethylene jacket is easy to strip, rugged and durable. Designed in accordance with applicable industry technical specifications, standards, and references including IEC and EN

Technical Data:

Item Description 4 Core 96 Core

1 Min.Bending radius (mm) Short term (loaded): 20*OD 208 258

Long term (Installed): 10*OD 104 129 2 Maximum tensile load (N) 2700 2700 3 Nominal outer diameter (mm) ± 5% 10.4 12.9 4 Nominal cable weight (Kg/Km) 95 123 5 Crush resistance (N/10cm) 2000 2000

6 Outer sheath Material MDPE MDPE

Thickness 1.9mm 2.0mm

7 Loose tube Material PBT PBT

Outer diameter 2.0mm 2.3mm Fibers/tube 4 Cores in a tube, (1) 12 Cores in a tube, (8)

8 Filler Material PP PP

No. 5 0 9 Fiber type SM G.652B fibers SM G.652B fibers

10 Jelly compound Material Jelly Jelly

11 Central member Material Steel wire Steel wire

Outer diameter 2.2 2.3

12 PE Up-coated Material --- PE

Thickness --- 0.8 Outer diameter --- 3.9

13 Water swellable yarn No. 2 2 14 Rip cord No. 2 2

15 Temperature Operation/Storage -40C° / 70C°

Installation -20C° / 40C°

www.netboxwll.com

59


IBE

R O

PT

IC C

AB

LE

S

Stranded Loose tube Non-Armored Duct cable (Single jacket)





1285-1340 nm 1525-1575 nm

≤0.03 dB / km ≤0.02 dB / km




≤0.090 ps/(nm²·km) 0.086 ps/(nm²·km)


≤0.2 ps/√km ≤0.1 ps/√km 0.04 ps/√km


1550 nm 9.2±0.4 μm 10.4± μm


1.466 1.467


≤0.05 dB ≤0.05 dB



ITEM 125/9 SM (G652D)

4Core NB-FOCA-076-52D

96Core NB-FOCA-077-52D

www.netboxwll.com

60


IBE

R O

PT

IC P

AT

CH

CO

RD

S

Fiber Optic Patch Cords

NetBox fiber optic patch cords & pigtails provide the highest level of connectivity

for all your fiber applications. Manufactured & tested to the tightest specifications, NetBox patch cords & pigtails

exceeds Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentlly rugged connectors and cable assemblies ensure lasting, repeatable connections.

Applications:

Fast Ethernet, Data communication LAN and WAN

High-speed Enterprise Servers Optical access and ATM Networks Equipment Multiplexores, Switches and Routers Optical Transport and Telecommunications

Switching Equipment Features:

Excellent Return Loss Low Insertion Loss Multimode & Singlemode Simplex & Duplex assemblies Cable sheath: LSZH standard (PVC on request), Telcordia GR-326-CORE Compliant IEC-61754-20 Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 terminations PC End-face polish, (UPC & APC on request) 2.0mm Outer Jacket diameter (1.6mm & 3.0mm on request)

Performance Specifications:

Single mode Multimode

Connector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB Return Loss -35 to -65dB Mating durability (500 cycles) <0.2dB Back reflection (typical) ≤55dB ≤20dB Tensile strength >10Kg

Operating Temperature: - 40 to + 85ºC



1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km













Multimode fiber Characteristics:


1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







www.netboxwll.com

61


IBE

R O

PT

IC P

AT

CH

CO

RD

S

ST – ST Duplex

Length SM 9um MM 50um MM 62.5um

1 M NB-FOPC-001 NB-FOPC-005 NB-FOPC-009







Custom Lengths Available

ST – SC Duplex










ST – MTRJ Duplex










SC – SC Duplex










SC – MTRJ Duplex










MTRJ – MTRJ Duplex










LC – LC Duplex










LC – SC Duplex










www.netboxwll.com

62


IBE

R O

PT

IC P

AT

CH

CO

RD

S

LC – ST Duplex










LC – FC Duplex










LC – MTRJ Duplex










FC - FC Duplex










FC - SC Duplex










FC - MTRJ Duplex










E2000 – E2000 Simplex










FC - ST Duplex










www.netboxwll.com

63

FIBER OPTIC PRODUCTS R

UG

GE

DIZ

ED

FIB

ER

OP

TIC

PA

TC

H C

OR

DS

Ruggedized Fiber Optic Patch Cords

NetBox fiber optic patch cords & pigtails provide the highest level of connectivity

for all your fiber applications. Manufactured & tested to the tightest specifications, NetBox patch cords & pigtails

exceeds Telcordia GR-326 requirements. Our precision zirconia ferrules and environmentlly rugged connectors and cable assemblies ensure lasting, repeatable connections.

Applications: FTTH Subway Temperature detector Power plant TV antenna All applications for which traditional patch-cords are used

Features:

SUS flexible armored tube keeps the fiber protected from damage Resisting the destroy caused by harsh environment & improper operation such as pull strength pressing, bending, improper twisting and bite of ants or mice Secure transmission power to avoid additional attenuation in case of bending, bundling, and heavy load. Easy and quick for replacement, can be handled as an electric wire Multimode & Singlemode Simplex & Duplex assemblies Cable sheath: LSZH standard (PVC on request), Telcordia GR-326-CORE Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 terminations PC End-face polish, (UPC & APC on request) 3.0mm Outer Jacket diameter


Single mode MultimodeConnector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB Return Loss -35 to -65dB Mating durability (500 cycles) <0.2dB Back reflection (typical) ≤55dB ≤20dB Tensile strength >20Kg




1550nm ≤0.3 dB/km


1550nm ≤18.0 Ps/nm.km















1300nm ≤1.0 dB/km

Bandwidth

50/125 um 62.5/125 um

850 nm ≥200 MHz/km 850 nm ≥160 MHz/km

1300 nm ≥200 MHz/km 1300 nm ≥200 MHz/km







www.netboxwll.com

64


UG

GE

DIZ

ED

FIB

ER

OP

TIC

PA

TC

H C

OR

DS

ST – ST Duplex


1 M NB-FOPC-001-RGD NB-FOPC-005-RGD NB-FOPC-009-RGD








ST – SC Duplex










ST – MTRJ Duplex










SC – SC Duplex










SC – MTRJ Duplex










MTRJ – MTRJ Duplex










LC – LC Duplex










LC – SC Duplex










www.netboxwll.com

65


UG

GE

DIZ

ED

FIB

ER

OP

TIC

PA

TC

H C

OR

DS

LC – ST Duplex










LC – FC Duplex










LC – MTRJ Duplex










FC - FC Duplex










FC - SC Duplex










FC - MTRJ Duplex










E2000 – E2000 Simplex










FC - ST Duplex










www.netboxwll.com

66


IBE

R O

PT

IC P

IGT

AIL

S

Fiber Optic Pigtails

Features:

Excellent Return Loss Ultra Low Insertion Loss Multimode & Singlemode Jacket: LSZH standard Telcordia GR-326-CORE Compliant IEC-61754-20 Compliant RoHS SC, FC, ST, LC, MT-RJ, MU & E2000 PC, UPC & APC Outer Jacket Available in 0.9mm, 1.6mm, 2mm & 3mm


Single mode Multimode

Connector type MTRJ LC, FC, SC, ST, MU E2000 MTRJ LC, FC, SC, ST, MU E2000

Insertion Loss 0.3dB 0.15dB 0.2dB 0.3dB 0.35dB 0.2dB

Return Loss -35 to -65dB

Mating durability (500 cycles) <0.2dB

Back reflection (typical) ≤55dB ≤20dB


Singlemode 9/125 Pigtails Part No. Description

NB-FOPG-007 SC/PC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-022 SC/APC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-010 SC/PC Simplex with 3.0mm jacket, LSZH, 3 Meter

NB-FOPG-001 ST/PC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-004 ST/PC Simplex with 3.0mm jacket, LSZH, 3 Meter

NB-FOPG-025 LC/PC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-032 LC/APC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-013 LC/PC Simplex with 2.0mm jacket, LSZH, 3 Meter

NB-FOPG-028 FC/PC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-029 FC/APC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-030 E2000/PC Simplex with 3.0mm jacket, LSZH, 1 Meter

NB-FOPG-031 E2000/APC Simplex with 3.0mm jacket, LSZH, 1 Meter

MultiMode 62.5/125 Pigtails


NB-FOPG-009 SC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-012 SC Simplex with 3.0mm jacket, LSZH, 3 Meter

NB-FOPG-003 ST Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-006 ST Simplex with 3.0mm jacket, LSZH, 3 Meter

NB-FOPG-023 LC Simplex 0.9mm, LSZH, 1 Meter

NB-FOPG-014 LC Simplex with 2.0mm jacket, LSZH, 3 Meter

NB-FOPG-026 FC Simplex 0.9mm, LSZH, 1 Meter

MultiMode 50/125 Pigtails

Part No. Description NB-FOPG-008 SC Simplex 0.9mm, LSZH, 1 Meter NB-FOPG-011 SC Simplex with 3.0mm jacket, LSZH, 3 Meter NB-FOPG-002 ST Simplex 0.9mm, LSZH, 1 Meter NB-FOPG-005 ST Simplex with 3.0mm jacket, LSZH, 3 Meter NB-FOPG-024 LC Simplex 0.9mm, LSZH, 1 Meter NB-FOPG-027 FC Simplex 0.9mm, LSZH, 1 Meter

www.netboxwll.com

67

FIBER OPTIC PRODUCTS 10G

(OM

3) FIB

ER

OP

TIC

PA

TC

H C

OR

DS

& P

IGT

AIL

S

10G (OM3) Multi Mode 50/125 Patch cords & Pigtails Applications:

Used in multi-gigabit Ethernet environments to patch and connect cabling systems

Features:

Provide 10-Gig performance (at 850 nm), up to 300 meters Backwords compatible to lower speed applications Compatible with 10Mb/100Mb/1Gb/10Gb transceivers Compliant with TIA/EIA-568-B.3 Core: 50 µm, Cladding: 125 µm, Buffer: 900 µm Jacket: 2.0mm, LSZH, Aqua fiber optic cable Max Attenuation: 2.5 dB/km @ 850 nm, 0.7 dB/km @ 1300 nm Bandwidth: 1500/500 MHz/km @ 850/1310 nm Effective Bandwidth: 2000 MHz/km @ 850 nm Operating Temperature: - 40 to + 85ºC

10-Gigabit LC-SC Duplex, Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M

NB-FOPC-343 NB-FOPC-344 NB-FOPC-345 NB-FOPC-346 NB-FOPC-347 NB-FOPC-348 NB-FOPC-349

10-Gigabit SC-SC Duplex, Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M


10-Gigabit LC-LC Duplex , Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M


10-Gigabit LC-ST Duplex, Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M


10-Gigabit ST-ST Duplex, Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M


10-Gigabit SC-ST Duplex, Multi Mode, 50-Micron

1M 2M 3M 5M 10M 20M 30M


10-Gigabit Pigtails, Multi Mode, 50-Micron, (0.9mm, LSZH, Aqua color, 1 Mtr)

ST SC LC FC

NB-FOPG-034 NB-FOPG-035 NB-FOPG-036 NB-FOPG-037

www.netboxwll.com

68

FIBER OPTIC PRODUCTS M

UL

TI-

FIB

ER

PR

E-T

ER

MIN

AT

ED

FIB

ER

OP

TIC

CA

BL

ES

Multi-Fiber Distribution & Breakout-Style Cables

Choose Multi-Fiber cables for your network and multi-connection needs Netbox multi-fiber distribution cable assemblies combine the bandwidth capacity of several individual cable assemblies into a single convenient, easy to use and install assembly. Multi-fiber distribution cable assemblies are traditionally used in backbone, premise distribution, and interconnect applications which require multiple fibers to be routed together from point-to-point. Netbox multi-fiber distribution cables are designed to offer a high degree of flexibility through available features and options, allowing each cable to be manufactured to fit the exact application. Multi-fiber distribution cables are available in single mode, multimode, and laser optimized fiber types, multiple jacket/construction types for different applications, fiber count from 4-48 fibers, SC, LC, ST, FC, and MU connector types, and breakout style/length. Comes with cable braid and pulling eye.

Performance Specification:

FC, ST, SC, LC, MU SM MM

Insertion Loss <0.3dB <0.3dB

Return loss >50dB >35dB

Mating durability (500 Cycles) <0.2dB <0.2dB

Temperature Range( ) -40 ~ +85


A B C D E F G H J K NB-MF-

A- Fiber count B- Fiber Type C- Cable Length (Mtr) D- Sheath type E- Fan-out Length F- Sub-Unit Style G- Connector 1 H- End Polish 1 J- Connector 2 K- End Polish 2

XX X XXXX X XX X XX X XX X

04 A= SM 9/125 Example: 0050= 50 Meters V= PVC 05=0.5 meter 1= 0.9mm SC 1= MM PC SC 1= MM PC 06 B= MM 50/125 Z= LSZH 10=1.0 meter 2= 1.6mm ST 2= SM PC ST 2= SM PC 08 C= MM 62.5/125 E= PE 12=1.2 meter 3= 2.0mm FC 3= SM APC FC 3= SM APC 12 D= MM 50/125 (10 Gig) 15=1.5 meter 4= 3.0mm LC LC 24 F= SM 9/125 (10 Gig) 18=1.8 meter 5= Custom MU MU 48 E= Custom 20=2.0 meter 00= Custom 00= Custom

00=Custom

Part Number Example: NB-MF-06A0050V101SC2SC2 This represents: Multifiber cable, 6 Single mode 9/125 fiber, 50 Mtrs length, PVC jacket, 1 meter length 0.9mm fan-out, SC/PC to SC/PC

Distribution-Style Cable Braid with Pulling Eye Breakout-Style

www.netboxwll.com

69

FIBER OPTIC PRODUCTS MO

DU

LA

R F

IBE

R O

PT

IC P

AT

CH

PA

NE

LS

& C

AB

INE

TS

1U, 19” Rack Mount Fiber Optic Panel

(Unloaded):

Simple SNAP in connector plate Sliding drawer Flexible system for ST or SC, FC, LC, MTRJ…Etc Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) 1U (Accepts 3 Adapter Plates) Dimensions: (425mmW*298mmD*45mmH)

Usage Environment:

Operating temperature: -5°C~+40°C Storage temperature: -25°C~+55°C Humidity ≤85%(+30°C) Atmosphere pressure: 70Kpa~106Kpa.

2U, 19” Rack Mount Fiber Optic Panel

(Unloaded):

Simple SNAP in connector plate Sliding drawer Flexible system for ST or SC, FC, LC, MTRJ…Etc Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) 2U (Accepts 6 Adapter Plates) Dimensions: (425mmW* 298mmD*90mmH)

Usage Environment:


Lock-Style WallMount Fiber Optic

Cabinets (Unloaded):

Simple SNAP in connector plate Lockable (key) Hinged door Flexible system for ST or SC, FC, LC, MTRJ…Etc Supplied with splice cassette & 4 pcs of cable Hanger Cable entry point Color : Black standard Material : Aluminum (1.5mm) 32 to 48-port (Accepts 4 Adapter Panels)

Usage Environment:


Lock-Style WallMount Fiber Optic

Cabinets (Unloaded):

Simple SNAP in connector plate Lockable (key) Hinged door Flexible system for ST or SC, FC, LC, MTRJ…Etc Supplied with splice cassette & 4 pcs of cable Hanger Cable entry point Color : Black standard Material : Aluminum (1.5mm) 48 to 72-port (Accepts 6 Adapter Panels)

Usage Environment:


4U, 19” Rack Mount Fiber Optic

Cabinet (Unloaded):

Simple SNAP in connector plate Material: Aluminum Flexible system for ST or SC, FC, LC, MTRJ…Etc Front and back side can have freely access to the cable. Cabinet surface covered with electrostatic powder coating. Adjustable arms with high capacity. Fit in 19” & 23” racks RAL9011 available. Bend radius of optical fiber ≥40mm. Variety of adaptors available. 4U (Accepts 12 Adapter Panels) Dimensions: (483mmW* 300mmD*177mmH)

Adapter Plates:


P/N Description

NB-FOAD-037 Adapter Plate, LC-LC, 6 Port Duplex, MM, Black

NB-FOAD-038 Adapter Plate, LC-LC, 6 Port Duplex, SM, Black

NB-FOAD-023 Adapter Plate, SC-SC, 4 Port Duplex, SM, Black

NB-FOAD-039 Adapter Plate, SC-SC, 4 Port Duplex, MM, Black

NB-FOAD-036 Adapter Plate, SC-SC, 6 Port Duplex, SM, Black

NB-FOAD-050 Adapter Plate, FC-FC Metal, 4 Port Duplex, SM, Black

NB-FOAD-051 Adapter Plate, FC-FC Metal, 4 Port Duplex, MM, Black

NB-FOAD-052 Adapter Plate, ST-ST Metal, 4 Port Duplex, SM, Black

NB-FOAD-053 Adapter Plate, ST-ST Metal, 4 Port Duplex, MM, Black

NB-FOAD-030 Adapter Plate, Un- Loaded, 6-ST Simplex Adapter, Black

NB-FOAD-031 Adapter Plate, Un- Loaded, 6-FC Simplex Adapter, Black

NB-FOAD-032 Adapter Plate, Un- Loaded, 6-SC Simplex Adapter, Black

NB-FOAD-054 Adapter Plate, Un- Loaded, 4-SC/ST/FC Duplex Adapter, Black

NB-FOAD-060 Adapter Plate, Un- Loaded, 6-SC/ST/FC Duplex Adapter, Black

NB-FOAD-055 Adapter Plate, Un- Loaded, 6-LC Duplex Adapter, Black

NB-FOAD-027 Blank Plate, Black

P/N: NB-FOPP-001 P/N: NB-FOPP-008

P/N: NB-FOPP-034

P/N: NB-FOPP-006

NB-FOPP-037

www.netboxwll.com

70


IBE

R O

PT

IC P

AT

CH

PA

NE

LS

Rack Mount Fiber Panel, 1U, 24 Simplex ST ports:

Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) Dimensions: (425mmW*298mmD*46mmH)

Usage Environment:



P/N Description

NB-FOPP-061 Rackmount Fiber Patch Panel, Empty 24 Simplex ST ports, 1U, Black

NB-FOPP-064 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex ST Single mode Adapters, 1U, Black

NB-FOPP-065 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex ST Multimode Adapters, 1U, Black

Rack Mount Fiber Panel, 1U, 24 Simplex SC ports:

Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) Dimensions: (425mmW*298mmD*46mmH)

Usage Environment:

Operating temperature: -5°C~+40°C Storage temperature: -25°C~+55°C Humidity ≤85%(+30°C)

Atmosphere pressure: 70Kpa~106Kpa. Ordering Information:

P/N Description

NB-FOPP-062 Rackmount Fiber Patch Panel, Empty 24 Simplex SC ports, 1U, Black

NB-FOPP-066 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex SC Single mode Adapters, 1U, Black

NB-FOPP-067 Rackmount Fiber Patch Panel, 24-port, Preloaded with 24 Simplex SC Multimode Adapters, 1U, Black

NB-FOPP-062

NB-FOPP-065

NB-FOPP-061

NB-FOPP-067

www.netboxwll.com

71


IBE

R O

PT

IC P

AT

CH

PA

NE

LS

Rack Mount Fiber Panel, 1U, 24 Duplex ports (48 core):

Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) SC, ST & FC Dimensions: (425mmW*298mmD*46mmH)

Usage Environment:



P/N Description

NB-FOPP-063 24-Port Duplex (48 core) Fiber patch panel, Rack Mount, Empty , 1U, Black

NB-FOPP-007 24-Port Duplex (48 core) SC Fiber patch panel, SM, Rack Mount, Loaded , 1U, Black

NB-FOPP-035 24-Port Duplex (48 core) SC Fiber patch panel, MM, Rack Mount, Loaded , 1U, Black

NB-FOPP-040 24-Port Duplex (48 core) ST Fiber patch panel, SM, Rack Mount, Loaded , 1U, Black

NB-FOPP-042 24-Port Duplex (48 core) ST Fiber patch panel, MM, Rack Mount, Loaded , 1U, Black

NB-FOPP-041 24-Port Duplex (48 core) FC Fiber patch panel, SM, Rack Mount, Loaded , 1U, Black

NB-FOPP-043 24-Port Duplex (48 core) FC Fiber patch panel, MM, Rack Mount, Loaded , 1U, Black

Rack Mount Fiber Panel, 2U, 48 Duplex ports (96 core):

Sliding drawer Supplied with cable management & splice cassette Color : Black standard Material : Aluminum (1.5mm) SC, ST & FC Dimensions: (425mmW* 298mmD*90mmH)

Usage Environment:



P/N Description

NB-FOPP-068 48-Port Duplex (96 core) Fiber patch panel, Rack Mount, Empty , 2U, Black

NB-FOPP-009 48-Port Duplex (96 core) SC Fiber patch panel, SM, Rack Mount, Loaded , 2U, Black

NB-FOPP-036 48-Port Duplex (96 core) SC Fiber patch panel, MM, Rack Mount, Loaded , 2U, Black

NB-FOPP-048 48-Port Duplex (96 core) ST Fiber patch panel, SM, Rack Mount, Loaded , 2U, Black

NB-FOPP-050 48-Port Duplex (96 core) ST Fiber patch panel, MM, Rack Mount, Loaded , 2U, Black

NB-FOPP-049 48-Port Duplex (96 core) FC Fiber patch panel, SM, Rack Mount, Loaded , 2U, Black

NB-FOPP-051 48-Port Duplex (96 core) FC Fiber patch panel, MM, Rack Mount, Loaded , 2U, Black

NB-FOPP-009

NB-FOPP-007

NB-FOPP-063

NB-FOPP-068

www.netboxwll.com

72


IBE

R O

PT

IC O

DF

& O

RG

AN

IZE

R

Fiber Optic ODF & Organizer

Exterior Structure

ODF (Loaded with 24 FC/SM Adapters), Size (483*248*44mm), P/N: NB-FOPP-059

Organizer, Size (483*230*44mm), P/N: NB-FOPP-060

Features: Material: SPCC, Thickness: 1.2mm Cabinet surface covered with

electrostatic powder coating, the power thickness is 0.1mm

Bend radius optical fiber ≥40mm

Application Telecommunication networks CATV networks Fiber to the home Co-Location/Customer Premise LAN/WAN

Photo-electricity Specifications Insertion Loss ≤0.5 dB Return Loss: PC≥40 dB, UPC≥50 dB,

APC≥60 dB Durability >1000 times Insulating Resistance ≥1000MΩ/500V Compressive Resistance >3000V (DC)

1min without breakdown and flashover

Usage Environment Operating temperature: -5°C~+40°C Storage temperature: -25°C~+55°C Humidity: ≤85% (+30°C) Atmosphere Pressure: 70Kpa~106Kpa

www.netboxwll.com

73

FIBER OPTIC PRODUCTS FIB

ER

OP

TIC

CO

NN

EC

TO

RS

& A

TT

EN

UA

TO

RS

Fiber Optic Connectors

STANDARDS All components of/and the final product are designed and tested to conform the requirements of IEC 60874-7, CECC 86115-801, Bellcore/Telcordia GR-326, EIA/TIA 604-3A, EIA/TIA 568, ISO/IEC 11801 2nd Ed., EN 50173, JIS C5973 F04, ICEA-596, IEC60793-2-10 A1a, ITU-T G.651 or IEC60793-2-10 A1b or ITU-T G.652 (depending on fiber), Belcore/Telcordia GR-409-CORE, IEC 793, IEC 794-1-E1, IEC 794-1-E3, UL1666/901 (UL-cable) and EIA/TIA455.

SC, MM SC/PC, SM MTRJ SC/APC ST

LC, MM LC/PC, SM FC FC/APC E2000/APC E2000/PC Ordering Information:

Epoxy Type Field Assembling Connector

P/N Connector P/N Connector P/N Description

NB-FOCO-003 SC/PC Multi mode NB-FOCO-016 FC/APC Single mode NB-FOCO-020 SC Fiber Field Assembling connector, 3mm, Multi Mode

NB-FOCO-004 SC/PC Single mode NB-FOCO-011 LC/PC Multi mode NB-FOCO-021 SC Fiber Field Assembling connector, 0.9mm, Multi Mode

NB-FOCO-015 SC/APC Single mode NB-FOCO-012 LC/PC Single mode NB-FOCO-022 SC Fiber Field Assembling connector, 3mm, Single Mode

NB-FOCO-007 ST/PC Multi mode NB-FOCO-013 MTRJ Multi mode NB-FOCO-023 SC Fiber Field Assembling connector, 0.9mm, Single Mode

NB-FOCO-008 ST/PC Single mode NB-FOCO-014 MTRJ Single mode

NB-FOCO-009 FC/PC Multi mode NB-FOCO-018 E2000/PC Single mode

NB-FOCO-010 FC/PC Single mode NB-FOCO-019 E2000/APC Single mode

Fiber Optic In-Line Attenuators

Application:

Telecommunication Networks Data Networks Video & CATV

Features:

Bellcore Compliant Durability (well over 100mw) Wavelength Independent (DWDM) Simple and reliable Structure

Specifications:

Operating Wavelength SM: 1310/1550nm

Return Loss UPC: < 55dB APC: < 65dB

Attenuation Accuracy ±0.5 (1-10dB) ±1.0 (11-30dB)

Polarization Dependent Loss <0.2dB Maximum Optical Input Power 200mW Operating Temperature Range -40 ~ +80 ºC


NB-FOAT-

Connector Application Attenuation dB

XX X XX

SC U= UPC 01 FC A= APC 02 ST 05 LC 10 MU 15

20 P/N Example: NB-FOAT-SCA05 This represents: SC/APC 5dB Attenuator 25

www.netboxwll.com

74


IBE

R O

PT

IC A

DA

PT

ER

S

Fiber Optic Adapters


Mating sleeve fiber optic adaptors allows users to couple from one connector type to another same type. These adaptors are comprised of a polymer / metal outer body and their inner assembly fitted with a precision alignment mechanism. These adaptors are precisely made and manufactured to demanded specification. The combination of a ceramic / phosphor bronze alignment sleeves and precision molded polymer housing provides consistent long-term mechanical and optical performance. Complies with JIS various connectors

Application:

Fiber optic transmission system CATV network LAN Testing/Measurement Instruments Fiber distribution frame, fiber optic wall mount and rack mount cabinets.

Compliance:

Excellent changeability and directivity 100% optic test (insertion loss) Ceramic and phosphor bronze sleeve tube optional Accurate external size Complies with JIS various connectors

Specification Polish Type PC APC Insertion Loss (dB) ≤0.20 ≤0.20 Mating Durability (500 Cycles) (dB) ≤0.20 Temperatures Stability (dB) ≤0.30 Operating Temperature (ºC) -40 ~ +80 Storage Temperature (ºC) -40 ~ +85 Withdrawal Force (g/f) 200 -- 600

Ordering Information: P/N Description P/N Description

NB-FOAD-009 ST-ST Adapter, Simplex, Metal, MM NB-FOAD-046 SC-SC Adapter, Simplex, Plastic, SM/APC

NB-FOAD-010 ST-ST Adapter, Simplex, Metal, SM NB-FOAD-016 SC-SC Adapter, Duplex, Plastic, MM

NB-FOAD-040 ST-ST Adapter, Duplex, Metal, MM NB-FOAD-017 SC-SC Adapter, Duplex, Plastic, SM/PC

NB-FOAD-033 ST-ST Adapter, Duplex, Metal, SM NB-FOAD-047 SC-SC Adapter, Duplex, Plastic, SM/APC

NB-FOAD-011 ST-ST Adapter, Duplex, Plastic, MM NB-FOAD-028 LC-LC Adapter, Duplex, Plastic, MM

NB-FOAD-012 FC-FC Adapter, Simplex, Metal, MM NB-FOAD-042 LC-LC Adapter, Duplex, Plastic, SM/PC

NB-FOAD-013 FC-FC Adapter, Simplex, Metal, SM/PC NB-FOAD-048 LC-LC Adapter, Duplex, Plastic, SM/APC

NB-FOAD-044 FC-FC Adapter, Simplex, Metal, SM/APC NB-FOAD-018 SC-ST Adapter, Simplex, Plastic, MM

NB-FOAD-029 FC-FC Adapter, Duplex, Metal, MM NB-FOAD-019 SC-ST Adapter, Simplex, Plastic, SM

NB-FOAD-041 FC-FC Adapter, Duplex, Metal, SM/PC NB-FOAD-020 SC-ST Adapter, Duplex, Plastic, MM

NB-FOAD-045 FC-FC Adapter, Duplex, Metal, SM/APC NB-FOAD-021 SC-ST Adapter, Duplex, Plastic, SM

NB-FOAD-014 SC-SC Adapter, Simplex, Plastic, MM NB-FOAD-043 E2000-E2000 Adapter, Simplex, Plastic, SM/PC

NB-FOAD-015 SC-SC Adapter, Simplex, Plastic, SM/PC NB-FOAD-049 E2000-E2000 Adapter, Simplex, Plastic, SM/APC

Bare Fiber Adapters

Characteristics:

Various receptacle type High stability Easy to operate Repeated use

Parameters:

Ferrule ID: ф0.1255/ ф0.1260 Insertion Loss: ≤1.0dB Repeatability: ≤0.2dB Life time: ≥1000

NB-FOAD-056

NB-FOAD-057

www.netboxwll.com

75


IBE

R O

PT

IC S

PL

ICIN

G A

CC

ES

SO

RIE

S

Fiber Optic Splice Cassettes

Material: Flame-Resisting (UL94V0) PA Color: White & Black Dimension: 155x92x10mm

Fiber Optic Splice Protection Sleeve

Features: Single holed (preshrunk) and eliminates fiber threading. Smooth, de-burred stainless steel reinforcing member ends decrease and risk of fiber damage during installation. Extended liner length prevents contact between the fiber and the backbone. Clear sleeve design per sign easy centering of splice before heating. Sealing structure makes the splice free from the effect of temperature and humidity from environment.

Application: A specially designed cross linked polyolefin tubing system, with meltable liner, providing strength and protection to optical fiber splices.

Usage Environment: Operating temperature: -55°C~+60°C Shrinking Temperature range: 90°C~+110°C

P/N (100-pack) Sleeve length

Strength member length Diameter after shrink Fiber count Recommended cleave length Coating diameter

NB-FOPG-018 60mm 51mm 3.1mm Single 16mm 0.25mm to 0.9mm

Fiber Optic Termination Box


P/N Description No. of ports Max. Capacity (core)

NB-FOCL-D Termination Box, Plastic 2 24

NB-FOCL-B Termination Box, Metal 2 48

NB-FOCL-A Termination Box, Metal 2 24

NB-FOCL-C Termination Box, Metal 2 24

NB-FOCL-A NB-FOCL-D NB-FOCL-B

12 - 24 Core, P/N: NB-FOPG-03924 Core, P/N: NB-FOPG-020 12 Core, P/N: NB-FOPG-019

Outer tube (heat-shrinkable)

Inner tube (hot-melt glue)

Strength member

www.netboxwll.com

76

FIBER OPTIC PRODUCTS O

UT

DO

OR

FIB

ER

OP

TIC

SP

LIC

E C

LO

SU

RE

S (

FO

SC

)

NB-FOCL-001

Application:

Suitable for aerial and wall-mounting

Features:

Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inoovative structure design and easy for operation Ambient temperature ranges from -40 to +60ºC

Dimension and capacity:

Outside dimension (LxWxH): 280x200x90 (mm) Weight (excluding outside box): 1200g – 1500g Number of inlet/outlet ports: 2 Diameter of fiber cable: Φ8 – Φ14 (mm) Core capacity of FOSC: 48 (max) Number of splice tray: 4 Core capacity per tray: 12 core

Main accessories and special tools:

Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube


P/N Size (mm) L x W x H Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray

NB-FOCL-001 280x200x90 48 2 Φ14 4 12

NB-FOCL-002

Application:

Suitable for aerial, wall-mounting, pipeline & underground

Features:

Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC







NB-FOCL-002 385x248x120 96 6 Φ23 8 12

www.netboxwll.com

77


UT

DO

OR

FIB

ER

OP

TIC

SP

LIC

E C

LO

SU

RE

S (F

OS

C)

NB-FOCL-003 & NB-FOCL-004

Application:

Suitable for aerial, underground, wall-mounting, duct-mounting and handhole-mounting

Features:

Made of high-strength engineering plastic (polycarbonate) Winding tape sealing for cable & Mechanical sealing for body Inoovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC


Outside dimension (LxWxH): 396x190x126 (mm) Weight (excluding outside box): 2500g – 2825g Number of inlet/outlet ports: 6 Diameter of fiber cable: Φ8 – Φ20 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 12 & 24 core





NB-FOCL-003 396x190x126 48 6 Φ20 4 12

NB-FOCL-004 396x190x126 96 6 Φ20 4 24

www.netboxwll.com

78


UT

DO

OR

FIB

ER

OP

TIC

SP

LIC

E C

LO

SU

RE

S (

FO

SC

)

NB-FOCL-005

Application:

Directly buried and special environment underground

Features:

Material suitable for underground Inovative structure design and easy for operation Anti-chemical cauterization Anti-hydrolysis Specialty Anti-termite Specialty Ambient temperature ranges from -40 to +65ºC







NB-FOCL-005 468x210x116 96 4 Φ21 4 24

NB-FOCL-006

Application:

Suitable for aerial, wall-mounting, duct-mounting and underground

Features:

Dome heat shrinkable seal Made of high-strength engineering plastic (polycarbonate) Inovative structure design and easy for operation Ambient temperature ranges from -40 to +65ºC


Outside dimension (HxD): 435xΦ190 (mm) Weight (excluding outside box): 2350g – 2600g Number of inlet/outlet ports: 5 Diameter of fiber cable: Φ8 – Φ25 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 24 core


Heat shrinkable protective sleeve Nylon tie Seal tape Hanging hook Earthing wire Labeling paper Buffer tube (7 meters) Pressure testing valve Heat shrinkable fixing sleeves


P/N Size (mm) H x D Core capacity Cable Port (max) Max diameter of cable (mm) Number of Splice tray Core Capacity per tray

NB-FOCL-006 435xΦ190 96 4 Φ25 4 24

Label

Grommet

Fiber holding tray

Base

Entry/exit tube

Fixing device for reinforced core

Entry/exit tube Seal fitting

FOST cover

Grommet

FOST

Fixing shelf for FOST

Fixing slot of heat shrinkable protective sleeve

FOST

90¡ ã

FOSC cover

Hoop fixing bolt

Hoop locking system

Hoop connector

Hoop (right)Hoop (left)

www.netboxwll.com

79


UT

DO

OR

FIB

ER

OP

TIC

SP

LIC

E C

LO

SU

RE

S (F

OS

C)

NB-FOCL-007

Application:


Features:



Outside dimension (HxD): 288xΦ178 (mm) Weight (excluding outside box): 1550g – 1740g Number of inlet/outlet ports: 4 Diameter of fiber cable: Φ8 – Φ20 (mm) Core capacity of FOSC: 48 (max) Number of splice tray: 4 Core capacity per tray: 12 core





NB-FOCL-007 288xΦ178 48 4 Φ20 4 12

NB-FOCL-008

Application:


Features:



Outside dimension (HxD): 510xΦ250 (mm) Weight (excluding outside box): 3860g – 5270g Number of inlet/outlet ports: 8 - 19 Diameter of fiber cable: Φ8 – Φ43 (mm) Core capacity of FOSC: 288 (max) Number of splice tray: 12 Core capacity per tray: 24 core





NB-FOCL-008 510xΦ250 288 8 - 19 Φ43 12 24

Hoop (left) Hoop (right)

Hoop fixing bolt

Hoop connector

Hoop locking systemFOST

Fiber holding tray

GrommetFixing slot of heat shrinkable protective sleeve


Seal fitting

Grommet

FOST

Base


Entry/exit tube(mass)Entry/exit tube(single)

FOSC cover

90¡ ã

F iber Optic

Logo

FOSC cover

Hoop fixing bolt

Hoop locking system

Hoop connector

Hoo p(right)Ho op(left)

Spl ic e Cl osure

90¡ ã

FOSC

Fixing slo t o f heat shrinkable protective sleeve

Fix ing shelf for FOST

FOST

Gro mmet

FOST coverSea l fitting

E ntry /exit tube(single)


E ntry /exit tube(mass)

B ase

Fiber holding tray

Grommet

D i 1

L abel

www.netboxwll.com

80


UT

DO

OR

FIB

ER

OP

TIC

SP

LIC

E C

LO

SU

RE

S (

FO

SC

)

NB-FOCL-009

Application:

Suitable for wall-mounting, duct-mounting and underground

Features:



Outside dimension (HxD): 490xΦ220 (mm) Weight (excluding outside box): 2950g – 4250g Number of inlet/outlet ports: 8 - 10 Diameter of fiber cable: Φ8 – Φ36 (mm) Core capacity of FOSC: 96 (max) Number of splice tray: 4 Core capacity per tray: 24 core 24 port distribution panel





NB-FOCL-009 490xΦ220 96 8 - 10 Φ36 4 24

NB-FOCL-010

Application:


Features:



Outside dimension (HxD): 500xΦ228 (mm) Weight (excluding outside box): 3100g – 3930g Number of inlet/outlet ports: 5 - 14 Diameter of fiber cable: Φ8 – Φ42 (mm) Core capacity of FOSC: 144 (max) Number of splice tray: 5 Core capacity per tray: 32 core





NB-FOCL-010 500xΦ228 144 5 - 14 Φ8 – Φ42 5 32

Heat shrinkable fixing sleeve (single)

Inlet/outlet tube (single)

Fiber cable

FOSC hoop (right)

FOSC hoop (left)

Hoop locking system

Hoop fixing bolt

Inlet/outlet tube (single)

Fiber cable

Inlet/outlet tube (mass)

Base

Hoop (metal)

Transom (metal)

FOSC cover

Grommet

Cl asp

Clasp

FOST Cover

Bolt

Nut

Seal Fiting

Earthing Deriving Device

Distribution Unit

Adapter

Bracket

Base

Fixing Shelf for FOST

Fixing Device for Reinforce Core

FOST

Fiber Optic

Splice Closure

Drawing 1

FOSC cover

Label

Hoop locking system

Hoop connector

Hoop fixing bolt

Hoop(right)Hoop(left)

Grommet

Fiber holding tray

Base

Fixing device forreinforced core

Entry/exit tubeSeal fitting

FOSC


Fixing slot of heatshrinkable protective sleeve

FOSC

90¡ã

Bracket



CABINETS & RACKS

CABINETS ACCESSORIES & CABLE MANAGEMENTS 93 - 94

ECONOMY SERVER RACKS 90 - 91

FLOOR STANDING NETWORKING CABINETS 92

SERVER RACKS 86 - 89

WALL MOUNT CABINETS (DOUBLE SECTION) 83

LOW-PROFILE WALL MOUNT CABINETS (DOUBLE SECTION) 84

2 POST & 4 POST OPEN RACKS 85

WALL MOUNT CABINETS (SINGLE SECTION) 82

www.netboxwll.com

82

CABINETS & RACKS W

AL

L M

OU

NT

CA

BIN

ET

S (

SIN

GL

E S

EC

TIO

N)

Wall Mount Cabinets (Single Section)

Feature:

Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19” standard installation Removable side panels, side locks optional Cable entry on both of top cover and bottom panel Turning angle of front door is over 180 degrees Loading Capacity: 60 Kgs Degree of Protection: IP20 120mm fan optional

Standard :

Comply with ANSI/EIA, RS-310-D, DIN41497 part 1, EC297-2, DIN41494 part 7, GB/T3047.2-92 standard

Material:

SPCC cold Rolled Steel Thickness : Mounting profile : 1.5mm, others : 1.2mm

Surface Finish:

Degreasing, pickling, phosphoric, powder coated


Single Section P/N Capacity(U) Color Height(mm) Width(mm) Depth(mm)

NB-CAB-001 6

Black (RAL9004) 368

600

450

NB-CAB-002 Gray (RAL7035)

NB-CAB-003 9

Black (RAL9004) 501


NB-CAB-005 12

Black (RAL9004) 635


NB-CAB-007 15

Black (RAL9004) 769


NB-CAB-009 18

Black (RAL9004) 901


NB-CAB-106 6 Black (RAL9004) 368

600 600


NB-CAB-108 12 Black (RAL9004) 635

NB-CAB-109 15 Black (RAL9004) 769

NB-CAB-110 18 Black (RAL9004) 901

1- Frame 2- Side panel 3- Mounting panel 4- Cable entry cover 5- Mounting profile 6- Front door options 7- Lock

www.netboxwll.com

83

CABINETS & RACKS W

AL

L M

OU

NT

CA

BIN

ET

S (D

OU

BL

E S

EC

TIO

N)

Wall Mount Cabinets (Double Section)

Feature:

Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19” standard installation Removable side panels, side locks optional Cable entry on both of top cover and bottom panel Turning angle of front door is over 180 degrees Loading Capacity: 60 Kgs Degree of Protection: IP20 Easy operation and maintaining at the back 120mm fan optional Turning angle of rear door is above 90 degrees

Standard :

Comply with ANSI/EIA, RS-310-D, DIN41497 part 1, EC297-2, DIN41494 part 7, GB/T3047.2-92 standard

Material:

SPCC cold Rolled Steel Thickness : Mounting profile : 1.5mm, others : 1.2mm

Surface Finish:

Degreasing, pickling, phosphoric, powder coated


Double Section

P/N Capacity(U) Color Height(mm) Width(mm) Depth(mm)

NB-CAB-095 12

Black (RAL9004) 635

600 550 NB-CAB-012 Gray (RAL7035)

NB-CAB-096 15

Black (RAL9004) 769



600 600


NB-CAB-011 12 Black (RAL9004) 635

NB-CAB-013 15 Black (RAL9004) 769

NB-CAB-089 18 Black (RAL9004) 901

1. Cable entry cover 2. Back panel 3. Frame 4. Side panel 5. Mounting profile 6. Lock 7. Front door options

www.netboxwll.com

84

CABINETS & RACKS L

OW

-PR

OF

ILE

WA

LL

MO

UN

T C

AB

INE

TS

(D

OU

BL

E S

EC

TIO

N)

Low-Profile Wallmount Cabinet (Double Section)

Features:

Max. Capacity : 13U Static loading capacity : 50 Kgs. Two Height available: ( 501mm & 769mm) External dimension of cabinet: 600mm (width)*270mm(depth) Toughened glass front door, could observe devices’operation Cable entries are available at top cover, good ventilation (cooling fans are optional) 2 pieces of mounting profiles are available. From the bottom up, install 2U mounting horizontally from the 1st U; install 4U mounting profiles

horizontally from the 6th U. The installation position for 4U mounting profiles could be adjusted from the 6th U to the 9th U. Cable entries at the back of wall mounted enclosure are available. Metal cable management rings are installed at the back for cable

management. Easy operation and maintaining at the back of enclosure.


P/N Color W*D*H (mm) Max. capacity

NB-CAB-070 Black (RAL9004) 600*270*769 13U

NB-CAB-071 Gray (RAL7035) 600*270*769 13U

NB-CAB-072 Black (RAL9004) 600*270*501 8U

NB-CAB-073 Gray (RAL7035) 600*270*501 8U

www.netboxwll.com

85

CABINETS & RACKS 2 P

OS

T &

4 PO

ST

OP

EN

RA

CK

S

Open Racks

Features:

Standard: comply with ANSI/EIA; RS-310-D, IEC297-2, DIN41491, PART1, DIN41494 PART7, GB/T3047.2-92 standard.

Modular design, easily assemble and disassemble for delivery, low-cost.

Various optional accessories according to requirements (cable management slot, cable management, removable working panel, etc.)

19” frame 2mm welded fold steel sheet, two side figure punching.

COLOR: Black (RAL9004)


Capacity Color P/N Two post 42U Black (RAL9004) NB-CAB-078 Four post 42U Black (RAL9004) NB-CAB-094

1-Pole 2- Plinth 3- Horizontal beam 4- Heavy duty castor

www.netboxwll.com

86

CABINETS & RACKS S

ER

VE

R R

AC

KS

Floor Standing Server Racks

FEATURES

Architecture Equipment from wide range of manufacturers easily installs into the rack. Fully adjustable vertical and horizontal mounting rails, ensures maximum compatibility. Three basic foot prints and 5 heights enable you to select the rack which fits your environment. Standard configurations Server Rack 61000: Extra deep server rack 600 mm wide by 1000 mm deep Server Rack 8800: Space saver at 800 mm wide by 800 mm deep Server Rack 81000: The classic 800 mm wide by 1000 mm deep

STRUCTURAL INTEGRITY Designed to support loads up to 1,000 kgs. static.

Thermal Management Depending on site location and equipment installed, various cooling techniques may be employed. The rack can be configured to accomodate a variety of methods.

Front to Rear : Cyberack equipped with vented roof plus perforated front and rear doors, allows rack mounted equipment to pull air from the front and exhaust it through rear of rack.

Bottom to Top (Chimney) : Selection of non or lightly vented doors, non vented roof and addition of fan trays will allow user to achieve this cooling effect. Forced Air : Addition of gasketing combined with non vented doors and roof, plus installation of "push" and "pull" fan trays, will create positive pressure inside the closed rack. Provides enhanced cooling as well as reducing external contaminants entering rack. Flexibility/Expandability Basic rack does not include doors, allowing user to select per needs. All doors are left right reversible by user on location. The rack can be bayed together at time of installation, or sometime in future, providing user with expansion capability to match their needs. Compliance Conforms to EIA-310-D, IEC-60297-2 standards. It is a type A cabinet.

Security All doors and side panels are equipped with locks. Side panels also come with quick release slide latches for easy removal in lower security or maintenance environments. Security panels for bayed racks are also available.

Quality Premium grade cold rolled steel coated with a iron-phosphate rust prevention layer and finished with tough scratch resistant powder polyester paint, forms the basis of our products. All design and manufacturing carried out under the rigorous ISO 9001 quality assurance system.

www.netboxwll.com

87

CABINETS & RACKS S

ER

VE

R R

AC

KS

Server Rack 61000

FEATURES

Depth of 1000 mm

Enhanced thermal management capabilities

Improved cable management support

Easily expandable on site

Field reversible lockable doors

Support loads up to 1,000 kg

Caster rated 250 kg/wheel

Heights: 27U, 39U, 42U and 45U

Standard: Conforms to EIA-310-D Type A, IEC-60297-2 Material: High grade cold rolled steel Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint

Color: Standard Low Gloss Black

SPECIFICATION SHEET MODEL 61000

Application: The Server rack 61000 concentrates on fulfilling the needs created by new generation rack mount servers and other devices. The additional depth, 1000 mm standard, will house most of today's deep servers. Thermal management is another crucial feature in today's rack mount environment, and Server rack 61000 can be fitted with a range of door and roof options to satisfy your particular configuration.

Internal Useable Height (mm):

UNIT REF. A B

27U 1375mm 1209mm

42U 2042mm 1870mm

600W C D E

600mm 465mm 450mm

UNIT REF. F G H I

1000D 1069mm 1000mm 866mm 731mm


NB-CAB-074 27U Server rack, 600mm x 1000mm, with metal curved front door, Black color

NB-CAB-041 42U Server rack, 600mm x 1000mm, with metal curved front door, Black color

www.netboxwll.com

88

CABINETS & RACKS S

ER

VE

R R

AC

KS

Server & Network Rack 8800

FEATURES

Open architecture supports wide range of equipment

Flexibility for mixed equipment installations

Lockable doors and panels for system integrity

Numerous options and accessories to suit your specific configuration

Easily expandable for future growth

Supports load up to 1,000 kg

Castor rated to 250 kg/wheel


Standard: Conforms to EIA-310-D Type A, IEC-60297-2

Material: High grade cold rolled steel

Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint


SPECIFICATION SHEET MODEL 8800 Application :

The Server rack 8800 is designed for networking equipment and cabling installations. The wide frame and cable management features allow for the configuration of a range of equipment including routers, hubs, bridges as well as other rack mounted or free standing devices. This versatility makes the 8800 an excellent solution to mixed installation environments.


UNIT REF. A B

42U 2042mm 1870mm

800W C D E

800mm 465mm 450mm

UNIT REF. F G H I

800D 869mm 800mm 666mm 581mm


NB-CAB-082 42U Server rack, 800mm x 800mm, with front glass door, Black color

NB-CAB-042 42U Server rack, 800 mm x 800mm, with metal curved front door, Black color

www.netboxwll.com

89

CABINETS & RACKS S

ER

VE

R R

AC

KS

Server & Network Rack 81000

FEATURES

Ideal for mixed equipment installations

Array of doors to achieve proper thermal management

Economized space usage by accepting both rack mounted and free standing equipment

Secure environment

Extensive work space for cable management

Supports load up to 1,000 kg

Castor rated to 250 kg/wheel


Standard: Conforms to EIA-310-D Type A, IEC-60297-2

Material: High grade cold rolled steel

Finish: 5 stage iron - phosphate pretreatment followed by tough scratch resistant powder coat paint


SPECIFICATION SHEET MODEL 81000

Application:

The Server rack 81000 was engineered to meet the demands of both high-density server installation plus network management requirements. The overall depth of 1000 mm will accept the deepest rack mounted servers on the market. Additional depth can be added on request. A wide selection of doors and other accessories rounds out the solutions offered by Server rack 81000.


UNIT REF. A B

42U 2042mm 1870mm

800W C D E

800mm 465mm 450mm

UNIT REF. F G H I

1000D 1069mm 1000mm 866mm 731mm


NB-CAB-086 42U Server rack, 800mm x 1000mm, with front glass door, Black color

NB-CAB-043 42U Server rack, 800 mm x 1000mm, with metal curved front door, Black color

www.netboxwll.com

90

CABINETS & RACKS E

CO

NO

MY

SE

RV

ER

RA

CK

S

Economy Floor Standing Server Racks with Front Metal Door

Feature:

Comply with ANSI/EIA;RS-310-D; DIN41491; PART1; IEC297-2; DIN41494; PART7; GB/T3047.2-92 standard, compatible 19” international standard, metric system standard and ETSI standard;

Optional cable entry on top cover and bottom panel, removable front & rear door and side panel facility, ventilation and rat-proof on the bottom.

Reliable structure, static loading capacity: 800KG Adjustable feet and castors are available, moving conveniently, and fixing reliable Hexagonal reticular high-density vented front door, Double section high-density vented rear door. Varies optional accessories, reliable quality. Excellent ventilation and heat dispersing . Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel Thickness: mounting profile 2.0mm, others: 1.2-1.5mm Degree of Protection: IP20 Color: RAL9004 (Black) ; RAL7035 (Gray)


Part Number Description Color Width Depth High

NB-CAB-102 27U Cabinet Black (RAL9004) 600mm 1000mm 1388mm




U mark mounting rail

Adjustable mounting profile & mounting

angle

Lockable cable entry

Fan unit

Spring lock, High density vented door

Double-section high-density vented rear door

Front Metal Curved Vented door

Earthing

800mm Width cabinet comes with 2 metal cable

management slot with cap

www.netboxwll.com

91

CABINETS & RACKS E

CO

NO

MY

SE

RV

ER

RA

CK

S

Economy Floor Standing Server Racks with Front Glass Door

Feature:



Reliable structure, static loading capacity: 800KG Adjustable feet and castors are available, moving conveniently, and fixing reliable Tempered glass front door with vented border, Double section high-density vented rear door. Varies optional accessories, reliable quality. Excellent ventilation and heat dispersing . Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel Thickness: mounting profile 2.0mm, others: 1.2-1.5mm Degree of Protection: IP20 Color: RAL9004 (Black) ; RAL7035 (Gray)







Double-section high-density vented rear door

Tempered glass front door with vented border

Adjustable mounting profile & mounting

angle

U mark mounting rail


Earthing

Fan unit

Vented border



www.netboxwll.com

92

CABINETS & RACKS F

LO

OR

ST

AN

DIN

G N

ET

WO

RK

ING

CA

BIN

ET

S

Floor Standing Networking Cabinets

Feature:



Reliable structure, static loading capacity: 500KG Adjustable feet and castors are available, moving conveniently, and fixing reliable International popular tempered glass front door, steel rear door. Varies optional accessories, reliable quality. Good ventilation and heat dispersing . Surface Finish: degreasing, pickling, phosphoric, powder coated. Material: SPCC cold rolled steel, Thickness: mounting profile 2.0mm, others: 1.2-1.5mm Degree of Protection: IP20 Color: RAL9004 (Black) ; RAL7035 (Gray)




NB-CAB-016 22U Cabinet Gray (RAL7035) 600mm 800mm 1166mm









Front door view

Back door view

U mark mounting rail Adjustable mounting profile & mounting

angle

Fan unit Earthing

Removable front door




www.netboxwll.com

93

CABINETS & RACKS CA

BIN

ET

S A

CC

ES

SO

RIE

S &

CA

BL

E M

AN

AG

EM

EN

TS

Heavy-Duty Fixed Shelves

Rated load: 100 kg SPCC cold rolled steel, T: 1.2mm Black (RAL9004)

P/N Color Depth (mm)

NB-CAB-085 Black 550 (for 800-depth cabinet)


Heavy-Duty 19” Rackmount Fixed

Shelves with mounting ear Rated load: 100 kg SPCC cold rolled steel, T: 1.2mm Black (RAL9004)




Cantilever Shelves

Rated load: 25 kg 19” installation 2U high SPCC cold rolled steel, Thickness: 1.5mm


NB-CAB-057 Black (RAL9004) 350

NB-CAB-058 Gray (RAL7035) 350

Keyboard Tray

19” Rack Mount High grade cold rolled steel Adjustable cable arm Sloped front edge Black (RAL9004)

P/N Description

NB-CAB-081 Telescopic keyboard tray kit

Sliding Vented Server Shelves

Rated load: 50 kg High grade cold rolled steel High quality bearing slide

mechanism


NB-CAB-050 Black 550

NB-CAB-051 White 550



Server Cabinet Fan Trays

220 VAC 50/60 Hz, 11/10 W 3 Fans/Tray

P/N Description

NB-CAB-055 Roof mout fan tray, 3 fan, Black

NB-CAB-056 Roof mout fan tray, 3 fan, Gray

Heavy-Duty Vented Fixed Server

Shelves Rated load: 100 kg High grade cold rolled steel








Full Width Fixed & Sliding Shelves

Rated load: 50 - 75 kg High grade cold rolled steel Black (RAL9004)

P/N Description

NB-CAB-053 Full width fixed server shelf 700mm Deep

NB-CAB-054 Full width sliding server shelf 700mm Deep

www.netboxwll.com

94

CABINETS & RACKS C

AB

INE

TS

AC

CE

SS

OR

IES

& C

AB

LE

MA

NA

GE

ME

NT

S

Blanking Panels

19” Rack Mount 1U, 2U & 4U SPCC cold rolled steel, 1.2mm Powder coated Black (RAL9004)

P/N Description

NB-CAB-091 1U Blanking panel



Cooling Fan

Dimension: 120mm*120mm*38mm Mounting dimension: 105mm*105mm Air flowing: 50-110 CBM/H Black (RAL9004)

P/N Description

NB-ACC-012 Single fan 220VAC

1U Cable Manager, Metal D-Ring

19” Rack Mount 5 rings Carbon steel (1.5mm panel, 2.0mm Metal Buckle) Powder coated Black (RAL9004)

P/N Description

NB-ACC-008 1U cable manager, with metal D-rings

Cage Nut Set

Screw: M6*16 Nut: M6 Washer: Φ6 Plated nickle surface finish

P/N Description

NB-ACC-013 Cage nuts & screws, (50-pack)

1U Cable Manager, Metal With Cover

19” Rack Mount Carbon steel 1.0mm Powder coated Black (RAL9004)

P/N Description

NB-ACC-040 1U metal cable manager with cover

2U Cable Manager, Metal D-Ring

19” Rack Mount 5 rings Carbon steel (1.5mm panel, 2.0mm Metal Buckle) Powder coated Black (RAL9004)

P/N Description

NB-ACC-010 2U cable manager, with metal D-rings

1U Cable Manager, Plastic With Cover

19” Rack Mount High-strength, flame-retardant thermoplastic Carbon steel Base 1.0mm Powder coated Black (RAL9004)

P/N Description

NB-ACC-009 1U plastic cable manager, with cover

2U Cable Manager, Plastic With Cover

19” Rack Mount High-strength, flame-retardant thermoplastic Carbon steel Base 1.0mm Powder coated Black (RAL9004)

P/N Description

NB-ACC-011 2U plastic cable manager, with cover



POWER DISTRIBUTION

POWER DISTRIBUTION UNITS 96 - 100

www.netboxwll.com

96

POWER DISTRIBUTION P

OW

ER

DIS

TR

IBU

TIO

N U

NIT

S

6 Outlets BS1363 PDU

P/N: NB-ACC-043

Socket Type BS1363 (90 degree) Outlet Module (6) RoHS YesBracket Install 19” Frontal installationCable with plug BS1363 13A plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 482.6 x 44.4 x 62 mmMounting Length 465 mm Case Length 432 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²


P/N: NB-ACC-058

Socket Type BS1363 (90 degree) Outlet Module (6) RoHS YesBracket Install 19” Frontal installationCable with plug BS1363 13A plug Control Function 16A Lighted master switchCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 487 x 44.4 x 62 mmMounting Length 459 mm Case Length 431 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²


P/N: NB-ACC-002

Socket Type BS1363 (45 degree) Outlet Module (8) RoHS YesBracket Install Inverse installation Cable with plug BS1363 13A plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 661 x 44.4 x 62 mmMounting Length 633 mm Case Length 605 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

www.netboxwll.com

97


OW

ER

DIS

TR

IBU

TIO

N U

NIT

S


P/N: NB-ACC-059

Socket Type BS1363 (45 degree) Outlet Module (8) RoHS YesBracket Install Inverse installation Cable with plug BS1363 13A plug Control Function 16A Lighted master switchCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 640 x 44.4 x 62 mmMounting Length 590 mm Case Length 562 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

8 Outlets BS1363 PDU (32A)

P/N: NB-ACC-047

Socket Type BS1363 13A (45 degree) Outlet Module (8) RoHS YesBracket Install Inverse installation Cable with plug IEC60309 plug, (32A 2p+E)Control Function No controlling functionCase color Black Cable Specification 3 x 6.0 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 620 x 44.4 x 62 mmMounting Length 592 mm Case Length 564 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²


P/N: NB-ACC-003

Socket Type BS1363 (45 degree) Outlet Module (12) RoHS YesBracket Install Inverse installation Cable with plug BS1363 13A plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 901 x 44.4 x 62 mmMounting Length 873 mm Case Length 845 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

www.netboxwll.com

98


OW

ER

DIS

TR

IBU

TIO

N U

NIT

S


P/N:NB-ACC-060

Socket Type BS1363 (90 degree) Outlet Module (12) RoHS YesBracket Install 19” Frontal installationCable with plug BS1363 13A plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 483 x 88.8 x 62 mmMounting Length 465 mm Case Length 427 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

6 Outlets US-type PDU

P/N: NB-ACC-005

Socket Type IEC60906 Socket(NEMA5-15R)[6]RoHS YesBracket Install 19” Frontal installationCable with plug IEC60906 10A plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 482.6 x 44.4 x 62 mmMounting Length 465 mm Case Length 432 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²


P/N: NB-ACC-061

Socket Type IEC60906 Socket(NEMA5-15R)[6]RoHS YesBracket Install 19” Frontal installationCable with plug IEC60906 plug(NEMA 5-15P 15A)Control Function 16A Lighted master switchCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 2500W Dimension L x W x H = 482 x 68 x 44.4mmMounting Length 465 mm Case Length 429 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

www.netboxwll.com

99


OW

ER

DIS

TR

IBU

TIO

N U

NIT

S


P/N: NB-ACC-062

Socket Type IEC60906 Socket(NEMA5-15R)[8]RoHS YesBracket Install 19” Frontal installationCable with plug IEC60906 plug(NEMA 5-15P 15A)Control Function 16A Lighted master switchCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 2500W Dimension L x W x H = 483.5 x 68 x 44.4mmMounting Length 465 mm Case Length 430.5 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

8 Outlets IEC PDU

P/N: NB-ACC-048

Socket Type Single IEC320 C13 Socket (8) RoHS YesBracket Install 19” Frontal installationCable with plug BS1363 13A plug Control Function No controlling functionCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 3250W Dimension L x W x H = 482.6x 44.4 x 62 mmMounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire 1.5 mm²

6 Outlets German-type PDU

P/N: NB-ACC-063

Socket Type DIN49440 16A Socket [6]RoHS YesBracket Install 19” Frontal installationCable with plug DIN49441 16A Plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = 483.5 x 68 x 44.4mmMounting Length 465 mm Case Length 430.5 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire Combined copper

www.netboxwll.com

100


OW

ER

DIS

TR

IBU

TIO

N U

NIT

S


P/N: NB-ACC-064

Socket Type DIN49440 16A Socket [6]RoHS YesBracket Install 19” Frontal installationCable with plug DIN49441 16A Plug Control Function No controlling functionCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = 482.6 x 68 x 44.4mmMounting Length 465 mm Case Length 430.5 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire Combined copper


P/N: NB-ACC-065

Socket Type DIN49440 16A Socket [8]RoHS YesBracket Install 19” Frontal installationCable with plug DIN49441 16A Plug Control Function Power switch, overload protecting & indicatorCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = 487.5 x 68 x 44.4mmMounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire Combined copper


P/N: NB-ACC-066

Socket Type DIN49440 16A Socket [8]RoHS YesBracket Install 19” Frontal installationCable with plug DIN49441 16A Plug Control Function No controlling functionCase color Black Cable Specification 3 x 1.5 mm² x 3M Rating voltage 250VAC 50/60Hz Max. Power 4000W Dimension L x W x H = 482.6 x 68 x 44.4mmMounting Length 465 mm Case Length 428 mm Fittings 2pcs φ6x16mm cross bolt, 2pcs M6 float nut, PDU manualSafety Authentication CEInterior Connection wire Combined copper



ACTIVE PRODUCTS

GIGABIT ETHERNET SWITCHES 112 - 113

SFP FIBER TRANSCEIVERS 114

INDUSTRIAL ETHERNET MEDIA CONVERSION SOLUTION 108 - 111

ETHERNET MEDIA CONVERSION SOLUTION 102 - 107

www.netboxwll.com

102

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

10/100Base-TX to 100Base-FX Media Converters

KC-300D, KC-300DM

www.netboxwll.com

103

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Web Smart 10/100/1000Base-T to 1000Base-X Gigabit Media Converter

KGC-310M

www.netboxwll.com

104

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

1000Base-T to 1000Base-X Gigabit Media Converters

KGC-300

www.netboxwll.com

105

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Multimode to Single Mode Fiber Media Converters

KGC-311

www.netboxwll.com

106

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Intelligent Media Converter Center Chassis

KC-1300

www.netboxwll.com

107

ACTIVE PRODUCTS E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

www.netboxwll.com

108

ACTIVE PRODUCTS IN

DU

ST

RIA

L E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Industrial 10/100Base-TX to 100Base-FX Media Converters

KCD-300

www.netboxwll.com

109

ACTIVE PRODUCTS IN

DU

ST

RIA

L E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Industrial 10/100Base-TX to 100Base-FX Media Converters

www.netboxwll.com

110

ACTIVE PRODUCTS IN

DU

ST

RIA

L E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Industrial 1000Base-T to 1000Base-X Gigabit Media Converters

KCD-400

www.netboxwll.com

111

ACTIVE PRODUCTS IN

DU

ST

RIA

L E

TH

ER

NE

T M

ED

IA C

ON

VE

RS

ION

SO

LU

TIO

N

Industrial 1000Base-T to 1000Base-X Gigabit Media Converters

www.netboxwll.com

112

ACTIVE PRODUCTS G

IGA

BIT

ET

HE

RN

ET

SW

ITC

HE

S

16/24-Port 10/100/1000Mbps Web Smart Gigabit Ethernet Switches

KGS-1604, KGS-2404

www.netboxwll.com

113

ACTIVE PRODUCTS G

IGA

BIT

ET

HE

RN

ET

SW

ITC

HE

S

16/24-Port 10/100/1000Base-T Gigabit Ethernet Switches

KGS-116, KGS-124

www.netboxwll.com

114

ACTIVE PRODUCTS S

FP

FIB

ER

TR

AN

SC

EIV

ER

S

SFP Fiber Transceivers



TOOLKITS

NETWORK TOOLKITS 116

FIBER OPTIC TOOLKITS 117

www.netboxwll.com

116

TOOLKITS N

ET

WO

RK

TO

OL

KIT

S

Professional Network Installer’s Tool Kit

P/N: NB-TLKT-N01 • 6pcs Professional Screwdriver (-)3.0x75mm (+)PH0x75mm (-)5.0x100mm (+)PH1x100mm (-)6.0x150mm (+)PH2x150mm • 8pcs Folding Hex Key • Flashlight • Tape Measure • Utility Knife • Impact and punch down tool with 1 spare blade • Desoldering Pump • Soldering Iron • Digital Multimeter • Utility Component Storage Box • Cable Tester • Universal Stripping Tool • Solder Reel • Multipurpose Precise Cutter & Stripper • 5" Long Nose Pliers ; 6" Side cutter ; 6" long nose plier ;6" combination pliers ; 6" Adjustable wrench • 6 pcs precision screwdriver • 4 1/2" Diagonal Cutting Pliers • Cable Cutter • Multi-Modular Plug Crimps, Strips, and Cuts Tool • Ratchet Type - Modular Plug Crimping Tool • Heavy-Duty ABS Carry Tool Case

Network Maintenance Tool Kit

P/N: NB-TLKT-N02 • 6pcs Professional Screwdriver (-)3.0x75mm (+)PH0x75mm (-)5.0x100mm (+)PH1x100mm (-)6.0x150mm (+)PH2x150mm • 4 1/2" Side Cutter • 5" Long Nose Pliers • Multipurpose Precise Cutter & Stripper • Utility Knife • 7pcs Folding Hex Key • Multi-Modular Plug Crimps, Strips, and Cuts Tool • Universal Stripping Tool • Cable Tester • Punch Down Tool with 66 &110/88 Blades with 1 spare blade • Durable Zippered Storage Case

Network Tool Kit

P/N: NB-TLKT-N03 • Multi-Modular Plug Crimps • Universal Stripping Tool • Impact and punch down tool with 1 spare blade • 4 1/2" Side Cutter • 5" Long Nose Pliers • 4pcs Screwdrivers: (-) 5 x 75mm ; (+) PH1 x 75mm (-) 6 x 100 mm ; (+) PH2 x 100 mm • LAN Cable Tester • General Purpose Tool Pouch

www.netboxwll.com

117

TOOLKITS F

IBE

R O

PT

IC T

OO

LK

ITS

Cold Cure Fiber Optic Termination Kit (For SC/ST/FC/LC Connectors)

Fiber Optic Crimping Tool Precision Stripper Carbide Scribe

SC & FC Polish Disc P/N: NB-TLKT-F01 ST Polish Disc LC Polish Disc Cleanser Glass Working Pad Rubber Working Pad 4 1/2" Side Cutter 5 PCS Cleaning Swabs Goggles Fiber Optic Wipes(5 wet and 5 dry) 2 PCS 6um Brown Diamond Polish Film 2 PCS 1um Purple Diamond Polish Film 2 PCS 0.05um White Diamond Polish Film 150mm Multi-Purpose Electronic Scissors 2 PCS Epoxy Application Syringes Two Part Epoxy PU Carrying Case

Fiber Optic Epoxy & Polish Termination Kit (For SC/ST/FC/LC Connectors)

P/N: NB-TLKT-F02 Contains all of the tools and consumable material necessary for epoxy and polish connector terminations

Fiber optic kevlar cutter 200X Universal Microscope Jacket Stripper Connector Cleaner Mille or Clauss Stripper Kim Wipes Grey Buffer Tube Stripper 4 oz.Bottle of Alcohol Universal Crimping tool (75)2.5mm Foam Swabs Fiber Cable Stripper Glass Polish Plate Round Cable Slitter 2.5mm Universal Polish Puck Round Cable Cutter 1.25mm Polish Puck 24 Port Connnector Hot Oven (5)Diamond Polish Film 15um Thermometer (5)Diamond Polish Film 9um Rubber Polish Pad (5)Diamond Polish Film 3um Utility knife (5)Diamond Polish Film 1um 3.5M Tape Measure (5)Diamond Polish Film 0.02um Precision tweezer (6)Epoxy Application Syringe 3ml Carbide fiber sceibe (5)EPO-TEK EPOXY Black Marker Carrying Case(430×310×135mm)

Fiber Fusion Splicing Tool Kit

P/N: NB-TLKT-F03 This professional tool kit is ideal for optical fiber fusion splicing. It includes all the most frequently need tools and supplies required for cable sheath removal and fusion splicing

Kevlar Shears 6Pcs Electronic Screwdriver Set Clauss Fiber Stripper Mini-Hacksaw Fiber Cable Stripper 8Pcs Folding type hex key set(inch) Round Cable Slitter Pro-soft Duplex color S/D(-)6×100mm Round Cable Slitter Pro-soft Duplex color S/D(+)#2×100mm Longitudinal Buffer Tube Slitter 8" Adjustable wrench Optical Fiber Jacket Stripper 4 oz.Bottle of Alcohol Wire Rope Cutter IPA cleaner towels Longitudinal Cable Shenth Slitter Blow Brush Carbide fiber sceibe Utility knife 1/4'' Driver Socket Set 3.5M Tape Measure 7'' Lineman's plier (178mm) Precision tweezer 6'' Flat nose plier (135mm) Black Marker 6'' Bent nose plier (130mm) Carrying Tool Case(430×310×135mm)

www.netboxwll.com

[email protected]

NetBox UK Ltd Suite 404 324 Regent Street London W1B 3HH United Kingdom

BAHRAIN Tel: (+973) 17742842, Fax: (+973) 17742749 P.O.Box: 3086, Manama Kingdom of Bahrain

QATAR Tel: (+974) 4569944, Fax: (+974) 4569933 P.O.Box: 8256, Doha Qatar

SAUDI ARABIA Tel: (+966) 3 8898435, Fax: (+966) 3 8898436 P.O.Box: 79863, Al-Khobar 31952 Kingdom of Saudi Arabia

Date post:	06-Jun-2020
Category:	Documents
Upload:	others
View:	4 times
Download:	0 times

STRUCTURED CABLING SOLUTIONS - SaudiConnectsaudiconnect.net/images/2009-2010_Catalog.pdf ·...

Documents