Job Name:Schedule Reference: Date:

Notes:

Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.

GENERAL FEATURES

• Allows P-Series outdoor units to operate to 0º F DB cooling.

• Allows PUMY outdoor units to operate to 23º F DB cooling.

• Prevents wind from reversing outdoor fan rotation.

• Durable, low maintenance construction.

Wind baffle Wb-Pa1 / Wb-Pa2 / Wb-Pa3

PLEASE NOTE

• Install outdoor units with the back surface facing wall side to eliminate the effects of external wind.

• Outdoor units should not be installed in an orientation or site where the wind blows directly at the back of the unit.

• Wind baffle should not be used where there is any obstacle at either side or above the outdoor unit as the discharged air will be blocked.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and Quantity

WB-PA1 WB-PA2 WB-PA3PUY/Z-A12NHA4 1

PUY/Z-A18NHA4 1

PUY/Z-A24NHA4 1

PUY/Z-A30NHA4 1

PUY/Z-A36NHA4 1

PUY/Z-A42NHA4 2

PUY/Z-A42NHA5 2

PUZ-HA30NHA4 2

PUZ-HA36NHA4 2

PUMY-P36NHMU 2

PUMY-P48NHMU 2

PUMY-P60NKMU 2

SPECIFICATIONSWB-PA1

Exterior

Color Ivory

Surface Treatment Polyester Powder Paint

Material Alloy hot-dip zinc coated carbon steel sheet

Weight 7 lb 7.9 oz

WB-PA2

Exterior

Color Ivory

Surface Treatment Acrylic resin coating

Material Alloy hot-dip zinc coated carbon steel sheet

Weight 8 lb 4.4 oz

WB-PA3

Exterior

Color Ivory

Surface Treatment Acrylic resin coating

Material Alloy hot-dip zinc coated carbon steel sheet

Weight 8 lb 8 oz

WB-PA2 / WB-PA3 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Manufactured for Mitsubishi electric us, inc. designed for P-series and PuMY outdoor units onlYJob Name: Location: Date:

Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Job Name: Location: Date:Purchaser: Engineer:Submitted to: For Reference Approval ConstructionSystem Designation: Schedule No.:

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

GENERAL FEATURES

• UsedinMr.SlimP-Seriesoutdoorunitswheneveracoolingoperationistobeperformedinoutdoorambienttempera-turesdownto0ºFDB.

• Usedforprotectionofthefanwhenstrongwindsstriketheairoutlet.

• Designedtopreventreverserotationoftheoutdoorunitfanwhenitenterslowspeedrotationmodewiththefancontrollerbeingoperated.

• Constructedfromzinc-coatedmildcarbonsteelforalongandreliableservicelife.

• Finishedwithanelectrostaticallyapplied,thermallyfusedacrylicresincoatingforcorrosionprotection.

Submittal Data: Wb-Pa1/Wb-Pa2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .WinD baffle

Notes:

PLEASE NOTE

• Installthisunitwiththebacksurfacefacingwallsidetoeliminatetheeffectsofexternalwind.

• Shouldnotbeinstalledinanorientationorsitewherethewindblowsdirectlyatthebackoftheunit.

• Shouldnotbeusedwherethereisanyobstacleateithersideorabovetheoutdoorunitasthedischargedairwillbeblocked.

• CanalsobemountedontheCITYMULTIS-Series3-tonand4-tonunitchangingthedirectionoftheoutputairtoa45ºangle.

MODEL REQUIRED PER OUTDOOR UNIT

UNIT MODELType and QuantityWB-PA1 WB-PA2

PUY/Z-A12NHA4 1 0

PUY/Z-A18NHA4 1 0

PUY/Z-A24NHA4 0 1

PUY/Z-A30NHA4 0 1

PUY/Z-A36NHA4 0 1

PUY/Z-A42NHA4 0 2

PUZ-HA30NHA2 0 2

PUZ-HA36NHA2 0 2

SPECIFICATIONSWB-PA1

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 7lb7.9oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M4x10)x4<SUS410/Passivated>Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2

Exterior

Color(Munsell) Ivory(3.0Y7.8/1.1)

SurfaceTreatment Acrylicresincoating

Material Alloyhot-dipzinccoatedcarbonsteelsheet

Weight 8lb3.7oz

AccessoryxQty.<Material/SurfaceTreatment>

Washerfacedscrew(M5x15)x4<Ironwire(SWCH18A)/Zincnickelplated>

WB-PA2 WB-PA1

Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.

diMensions: Wb-Pa1

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.

DimenSiOnS: Wb-Pa1

Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.

diMensions: Wb-Pa2

3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201

DimenSiOnS: Wb-Pa2

3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#4)www.mitsubishipro.com

Manufactured for Mitsubishi ElEctric us, iNc.

Specifications are subject to change without notice. © 2012 Mitsubishi Electric US, Inc.

FORM# WIND BAFFLE - 201211

diMensions: Wb-Pa3

.254 PLCS

23

21

8

8 .5

1

.5

25.6

22.4

25

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

ADESCRIPTION

REVISIONS

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03

INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5

MATERIAL

FINISH

20 GA GALV G90

POWDER COAT PAINT

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

DATENAME

TITLE:

SIZE

BDWG. NO. REV

WEIGHT: SCALE: 1:8

UNLESS OTHERWISE SPECIFIED:

-

CF OCT-23-12

SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING

MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL

WB-PA3REV. DESCRIPTION

BDESCRIPTION

CDESCRIPTION

DDESCRIPTION

EDESCRIPTION

FDESCRIPTION

GDESCRIPTION

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.

1

1

.254 PLCS

23

21

8

8 .5

1

.5

25.6

22.4

25

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

ADESCRIPTION

REVISIONS

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03

INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5

MATERIAL

FINISH

20 GA GALV G90

POWDER COAT PAINT

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

DATENAME

TITLE:

SIZE

BDWG. NO. REV

WEIGHT: SCALE: 1:8

UNLESS OTHERWISE SPECIFIED:

-

CF OCT-23-12

SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING

MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL

WB-PA3REV. DESCRIPTION

BDESCRIPTION

CDESCRIPTION

DDESCRIPTION

EDESCRIPTION

FDESCRIPTION

GDESCRIPTION

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.

1

1

3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201

DimenSiOnS: Wb-Pa2

3400 Lawrenceville Suwanee RdSuwanee, GA 30024Tele: 678-376-2900 • Fax: 800-889-9904Toll Free: 800-433-4822 (#3)www.mehvac.comSpecifications are subject to change without notice.

© 2012 MITSUBISHI ELECTRIC & ELECTRONICS, INC.FORM#WB-PA1/WB-PA2-201201

DimenSiOnS: Wb-Pa2

.254 PLCS

23

21

8

8 .5

1

.5

25.6

22.4

25

D

C

B

AA

B

C

D

12345678

8 7 6 5 4 3 2 1

ADESCRIPTION

REVISIONS

DIMENSIONS ARE IN INCHESTOLERANCES:FRACTIONAL 1/16ANGULAR: BEND 2 DEGREESTWO PLACE DECIMAL 0.06THREE PLACE DECIMAL 0.03

INTERPRET GEOMETRICTOLERANCING PER:ASME Y14.5

MATERIAL

FINISH

20 GA GALV G90

POWDER COAT PAINT

DRAWN

CHECKED

ENG APPR.

MFG APPR.

Q.A.

DATENAME

TITLE:

SIZE

BDWG. NO. REV

WEIGHT: SCALE: 1:8

UNLESS OTHERWISE SPECIFIED:

-

CF OCT-23-12

SHEET 1 OF 1WB-PA3-submittal DO NOT SCALE DRAWING

MITSUBISHI ELECTRICWIND BAFFLE - WB-PA3MR. SLIM P-SERIESPUMY-60SUBMITTAL

WB-PA3REV. DESCRIPTION

BDESCRIPTION

CDESCRIPTION

DDESCRIPTION

EDESCRIPTION

FDESCRIPTION

GDESCRIPTION

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFMITSUBISHI ELECTRIC CORPORATION. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFMITSUBISHI ELECTRIC CORPORATION IS PROHIBITED.

1

1