of 17
5/22/2018 Submittals Equipos GREENHECK
1/17
70
96.75
51.125
68.88
50.5
2.5
StaticPressure(in.wg)
0.0
0.4
0.8
1.2
1.6
2.0
2.4
BrakePowe
r(hp)
0
3
6
9
12
15
18
Volume (CFM) x 10,000
0 1 2 3 4 5 6 7
824FRPM
Do no
tope
rate
insh
aded
are
a
System
26/05/2Printed Date:PEPSICO - 22Job:
PROCESS OMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
2/17
Sound Power by Octave BandSound
Data62.5 125 250 500 1000 2000 4000 8000 LwA dBA Sones
Inlet 99 94 89 87 83 79 75 70 89 77 30
26.88
66.5
1.75
62.63
45
61.25
Model: RBU-3L54-75
Propeller Upblast Belt Drive
DimensionalQuantity 6
Weight w/o Acc's (lb) 751
Weight w/ Acc's (lb) 809
Max T Motor Frame Size 254
Roof Opening (in.) 63 x 63
PerformanceRequested Volume (CFM) 43,000
Actual Volume (CFM) 43,000
External SP (in. wg) 0.1
Total SP (in. wg) 0.1
Fan RPM 494
Operating Power (hp) 6.58
Elevation (ft) 43
Airstream Temp.(F) 70
Air Density (ft3) 0.075
Drive Loss (%) 3.8
Tip Speed (ft/min) 6,986
Static Eff. (%) 11
Motor
Motor Mounted Yes
Size (hp) 7 1/2
V/C/P 460/60/3
Enclosure TEFC
Motor RPM 1725
Windings 1
NEC FLA* (Amps) 11
Notes:All dimensions shown are in units of in..
*FLA - based on tables 150 or 148 of National Electrical
Code 2002. Actual motor FLA may vary, for sizing thermal
overload, consult factory.
LwA - A weighted sound power level, based on ANSI S1.4
dBA - A weighted sound pressure level, based on 11.5 dB
attenuation per Octave band at 5 ft - dBA levels are not
licensed by AMCA International
Sones - calculated using AMCA 301 at 5 ft
26/05/2Printed Date:PEPSICO - 22Job:
FG WAREHOMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
3/17
Model: RBU-3L54-75
Propeller Upblast Belt Drive
Standard Construction Features:
- Curb caps and drive frame assemblies of galv steel sizes 18 to 48, painted steelsizes 54 and 60 - Galvanized steel windband with built in damper stops - Butterfly
dampers - Fabricated steel propeller - Ball bearing motors - Adjustable motor
plate - Variable pitch motor pulley - Fan shaft mounted in pillow block bearings
with grease zerks - Static free belts - Corrosion resistant fasteners
Options & Accessories:NEMA Premium Efficient Motor - meets NEMA Table 12-12
UL/cUL 705 Listed - "Power Ventilators"
Roof Curb-Galv., GPI-66.5-G12, Under Sized 1.5 in. Total
Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan And Attached Acc
Galvanized Construction
Steel Propeller
Steel Butterfly Damper
Bearings with Grease Fittings
Unit Warranty: 1 Yr (Standard)
26/05/2Printed Date:PEPSICO - 22Job:
FG WAREHOMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
4/17
52
72
35.25
49.63
37.5
2.5
StaticPressure(in.wg)
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
BrakePowe
r(hp)
0.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
Volume (CFM) x 1,000
0 2 4 6 8 10 12 14 16 18 20
506FR
PM
Do not
operate
in sh
aded
area
System
26/05/2Printed Date:PEPSICO - 22Job:
CORN CLMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
5/17
Sound Power by Octave BandSound
Data62.5 125 250 500 1000 2000 4000 8000 LwA dBA Sones
Inlet 92 90 86 83 79 75 71 65 85 74 24
AIR FLOW
See the Assembly Drawing For
Selected Accessories
56
2
25
19
49.25
Model: SBE-2L48-50
Sidewall Belt Drive Exhaust Fan
DimensionalQuantity 2
Weight w/o Acc's (lb) 279
Weight w/ Acc's (lb) 573
Max T Motor Frame Size 184
Optional Damper (in.) 50 x 50
Wall Opening (in.) 57.75 x 57.75
PerformanceRequested Volume (CFM) 23,000
Actual Volume (CFM) 23,000
External SP (in. wg) 0.4
Total SP (in. wg) 0.4
Fan RPM 518
Operating Power (hp) 3.86
Elevation (ft) 43
Airstream Temp.(F) 70
Air Density (ft3) 0.075
Drive Loss (%) 4.1
Tip Speed (ft/min) 6,506
Static Eff. (%) 39
Motor
Motor Mounted Yes
Size (hp) 5
V/C/P 460/60/3
Enclosure TEFC
Motor RPM 1725
Windings 1
NEC FLA* (Amps) 7.6
Notes:All dimensions shown are in units of in..
*FLA - based on tables 150 or 148 of National Electrical
Code 2002. Actual motor FLA may vary, for sizing thermal
overload, consult factory.
LwA - A weighted sound power level, based on ANSI S1.4
dBA - A weighted sound pressure level, based on 11.5 dB
attenuation per Octave band at 5 ft - dBA levels are not
licensed by AMCA International
Sones - calculated using AMCA 301 at 5 ft
26/05/2Printed Date:PEPSICO - 22Job:
UTILITMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
6/17
Model: SBE-2L48-50
Sidewall Belt Drive Exhaust Fan
Standard Construction Features:
- Galvanized steel fan panel - Die formed, galvanized steel drive frame assembly- Fabricated steel propeller for Levels 1 and 2, welded and painted steel for Level
3 - Adjustable motor pulley - Ball bearing motors - Fan shaft mounted in ball
bearing pillow blocks - Static resistant belts - Corrosion resistant fasteners
Options & Accessories:NEMA Premium Efficient Motor - meets NEMA Table 12-12
UL/cUL 705 Listed - "Power Ventilators"
Damper, WD-320-PB-50X50, Gravity Operated (Mounted), Coated
Short Wall Hsg, Flush Int., (2A-Exh), w/ OSHA Grd., Ctd with Hi-Pro Polyester,
Concrete Gray-RAL 7023
Galvanized Damper Guard
Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan & Attached Accessories
Bearings with Grease Fittings
Unit Warranty: 1 Yr (Standard)
26/05/2Printed Date:PEPSICO - 22Job:
UTILITMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page
5/22/2018 Submittals Equipos GREENHECK
7/17
DAMPER TYP. SECTION VIEW
50
50
3.5
1.5
2.75
Standard Construction Features:
- Model WD-320 is a vertical mount exhaust damper and is constructed of 18 ga galvanized steel with pre-punched mount
holes and a flanged frame - Damper blades are 0.025 in. roll formed aluminum with vinyl seals on the closing edge - Steel
are 0.188 in. diameter zinc plated mounted steel in acetal bushings - Synthetic axle bearings
Notes: All dimensions shown are in units of in.
Width And height furnished approximately 0.125 in. undersize
Vertical Mount Exhaust Damper
Model: WD-320
26/05/2Printed Date:PEPSICO - 22Job:
UTILITMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
8/17
56.38
3
56.38
44
Standard Construction Features:
- Galvanized steel construction - Heavy gauge mounting flanges - Pre-punched mounting holes - Insflanges allow damper to be mounted - Overlapping weatherhood flange keeps rain out - OSHA Prote
guard of welded steel wire completely protects the drive side of the wall housing.
Notes: All dimensions shown are in units of in.
Short Wall Housing
26/05/2Printed Date:PEPSICO - 22Job:
UTILITMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
9/17
Sound Power by Octave BandSound
Data62.5 125 250 500 1000 2000 4000 8000 LwA dBA Sones
Inlet 91 89 85 82 78 74 70 64 84 73 22
AIR FLOW
See the Assembly Drawing For
Selected Accessories
56
2
25
19
49.25
Model: SBE-2L48-50
Sidewall Belt Drive Exhaust Fan
DimensionalQuantity 2
Weight w/o Acc's (lb) 279
Weight w/ Acc's (lb) 573
Max T Motor Frame Size 184
Optional Damper (in.) 50 x 50
Wall Opening (in.) 57.75 x 57.75
PerformanceRequested Volume (CFM) 23,000
Actual Volume (CFM) 23,000
External SP (in. wg) 0.4
Total SP (in. wg) 0.4
Fan RPM 495
Operating Power (hp) 3.88
Elevation (ft) 43
Airstream Temp.(F) 0
Air Density (ft3) 0.086
Drive Loss (%) 4.1
Tip Speed (ft/min) 6,224
Static Eff. (%) 39
Motor
Motor Mounted Yes
Size (hp) 5
V/C/P 460/60/3
Enclosure TEFC
Motor RPM 1725
Windings 1
NEC FLA* (Amps) 7.6
Notes:All dimensions shown are in units of in..
*FLA - based on tables 150 or 148 of National Electrical
Code 2002. Actual motor FLA may vary, for sizing thermal
overload, consult factory.
LwA - A weighted sound power level, based on ANSI S1.4
dBA - A weighted sound pressure level, based on 11.5 dB
attenuation per Octave band at 5 ft - dBA levels are not
licensed by AMCA International
Sones - calculated using AMCA 301 at 5 ft
26/05/2Printed Date:PEPSICO - 22Job:MECH ROOM 1Mark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
10/17
Model: SBE-2L48-50
Sidewall Belt Drive Exhaust Fan
Standard Construction Features:
- Galvanized steel fan panel - Die formed, galvanized steel drive frame assembly- Fabricated steel propeller for Levels 1 and 2, welded and painted steel for Level
3 - Adjustable motor pulley - Ball bearing motors - Fan shaft mounted in ball
bearing pillow blocks - Static resistant belts - Corrosion resistant fasteners
Options & Accessories:NEMA Premium Efficient Motor - meets NEMA Table 12-12
UL/cUL 705 Listed - "Power Ventilators"
Damper, WD-320-PB-50X50, Gravity Operated (Mounted), Coated
Short Wall Hsg, Flush Int., (2A-Exh), w/ OSHA Grd., Ctd with Hi-Pro Polyester,
Concrete Gray-RAL 7023
Galvanized Damper Guard
Coating Hi-Pro Polyester, Concrete Gray-RAL 7023, Fan & Attached Accessories
Bearings with Grease Fittings
Unit Warranty: 1 Yr (Standard)
26/05/2Printed Date:PEPSICO - 22Job:MECH ROOM 1Mark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
11/17
DAMPER TYP. SECTION VIEW
50
50
3.5
1.5
2.75
Standard Construction Features:
- Model WD-320 is a vertical mount exhaust damper and is constructed of 18 ga galvanized steel with pre-punched mount
holes and a flanged frame - Damper blades are 0.025 in. roll formed aluminum with vinyl seals on the closing edge - Steel
are 0.188 in. diameter zinc plated mounted steel in acetal bushings - Synthetic axle bearings
Notes: All dimensions shown are in units of in.
Width And height furnished approximately 0.125 in. undersize
Vertical Mount Exhaust Damper
Model: WD-320
26/05/2Printed Date:PEPSICO - 22Job:MECH ROOM 1Mark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
12/17
56.38
3
56.38
44
Standard Construction Features:
- Galvanized steel construction - Heavy gauge mounting flanges - Pre-punched mounting holes - Insflanges allow damper to be mounted - Overlapping weatherhood flange keeps rain out - OSHA Prote
guard of welded steel wire completely protects the drive side of the wall housing.
Notes: All dimensions shown are in units of in.
Short Wall Housing
26/05/2Printed Date:PEPSICO - 22Job:MECH ROOM 1Mark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
13/17
Int er na l v iew
Width and Height furnished approximately 0.250 in. under size.
EACC-4014 in. Frame, Concealed Actuator
Appl ication & DesignEACC-401 is a combination louver/damper designed to protect air intake
exhaust openings in building exterior walls that, at times, require tight air soff. Design incorporates a drainable head member, drainable stationary blad
operable blades and a concealed actuator within the louver sill. When
operable blades are open, airflow is permitted through the louver, when
blades are closed, a tight seal is created to prevent the passage of air.
Construction Features
Frame Depth (in.): 4 Frame Thickness (in.): 0.125 Louver Material: Alumin
Frame Type: Channel Sizing: Nominal Fixed Blade Thick. (in.): 0.0
Adj. Blade Thick. (in.): 0.081 Blade/Jamb Seals: Yes Axle Bearings: Synth
Axle Material: Steel
Options and Accessories
Finish
Louver Finish Type: Mill
ActuatorActuator Type: 120 VAC Actuator Mount: Internal Actuator Location: Left
Actuator Fail. Pos.: Closed Act. Operating Mode: Two Position Transformer: None
NEMA Enclosure: 1 Act. Access: Internal
Insect ScreenInsect Screen Location: Internal Insect Screen Type: Aluminum
FiltersFilter Material: Aluminum Filter Type: Permanent Filter Supplier: Greenheck
Filter Removal: Rear Filter Depth (in.): 2.000
WarrantyProduct Warranty: 1 Yr (Standard)
Summary
ID # Tag Qty. W (in.) H (in.)Free Area
(ft2)Drive. Actuator Model Sect. Wide
Sect.
High
Sect.
Ship
Actuato
Ship Sec
1-1 12 75.000 75.000 15.39 11-1FIL-0 MS4120F1006 2 1 24 1
PerformanceID # Application Volume (CFM) Press. Drop (in. wg) Free Area Velocity (ft/min) BPWP (ft/min)
1-1 Intake 7,667 0.028 481 1,192
**Calculated pressure drop does not include the effects of screens, filters or other accessories
26/05/2Printed Date:PEPSICO - 22Job:
LOUVER UTILITIES & MECH ROMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
14/17
Larger openings may require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand windloads up to a maximum of 25
PSF (size and configuration dependent). Design, materials and installation of structural reinforcement required to adequately support large sections or multiple section assemblies within a large
opening are not provided by Greenheck. Unless specifically indicated, the following are NOT included in the quote provided: structural steel, installation hardware (anchors, angle clips,
continuous angles, shims, fasteners, inserts, backer rod and sealant), field measuring and/or installation, miscellaneous flashing, trim or enclosures, blank off panels, mullion covers or mullion
hardware, hinged frames or removable subframes, custom bird/insect screen, 3-coat, metallic and/or exotic paint finishes, bituminous paints for unlike metals, any applicable taxes, stamped and
sealed structural calculations seismic calculations or job specific engineered submittal drawings.
26/05/2Printed Date:PEPSICO - 22Job:
LOUVER UTILITIES & MECH ROMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
15/17
Louvers Product Limited Warranty
Thank you for purchasing Greenheck louvers. Greenheck warrants this equipment to be free from defect in material and workmanship for a period of
yearfrom the date of product shipment. Any units or parts, which prove defective during the warranty period, will be repaired or replaced at our optio
when returned to our factory, transportation prepaid. Unless agreed upon otherwise Greenheck will not be held responsible for costs associated with
removal or installation of product(s).
The legal remedies described in this Limited Warranty are the sole exclusive remedy of Customer. This limited warranty will be void if payment from
Customer is not received within a commercially reasonable time frame. GREENHECK MAKES NO OTHER WARRANTY, EITHER EXPRESS OR
IMPLIED, REGARDING ITS PRODUCTS, OR ITS SELECTION AND APPLICATION, INCLUDING, BUT NOT LIMITED TO, COMPLIANCE WITH
BUILDING CODES, SAFETY CODES, LAWS, MERCHANTABILITY OR FITNESS OR A PARTICULAR PURPOSE. This limited warranty is extende
solely to the Customer. It is nontransferable and non-assignable, and the Customer shall not permit or authorize its employees, agents, representativ
or customers to claim, represent or imply that this limited warranty extends or is available to anyone other than the Customer.
In the event of material breach by the Customer of any of the conditions of this warranty, Greenheck shall have no liability for and product failure clai
Failure to pay Greenheck in full for original services will automatically make this warranty null and void.
Greenheck will not be held liable for incidental or consequential damages of any kind. The limited warranty of product(s) replaced or repaired under
limited warranty shall be limited to the remainder of the original warranty period. Greenheck reserves the right to reasonable field access to diagnos
and repair any product alleged to be defective. This limited warranty may not be modified by anyone and may not be changed by such things as
purchase order forms or acceptance forms, unless otherwise agreed upon by Greenheck.
This limited warranty is provided in lieu of any other warranty requirements or obligations, including, but not limited to, those within project specificati
All notices and claims given under or pursuant to this agreement shall be in writing and sent by certified or registered mail, postage prepaid, return
receipt requested to: Greenheck, Attn: Louver Sales, 525 Western Road, Schofield, WI 54476.
By proceeding to use our products and services on your project, you accept the terms of these limited warranties.
26/05/2Printed Date:PEPSICO - 22Job:
LOUVER UTILITIES & MECH ROMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
16/17
Int er na l v iew
Width and Height furnished approximately 0.250 in. under size.
FSJ-4024 in. Frame, J Blade
Appl ication & DesignFSJ-402 is fabricated stationary louver designed to protect air intake
exhaust openings in building exterior walls. Design incorporates stationastyle blades. The FSJ-402 is an extremely efficient louver with AM
LICENSED PERFORMANCE DATA enabling designers to select and apply w
confidence.
Construction Features
Frame Depth (in.): 4 Frame Thickness (ga): 18 Louver Material: 304
Frame Type: Channel Sizing: Nominal Fixed Blade Thick. (ga):
Shape: Rectangular Welded Construction: Yes
Options and Accessories
FinishLouver Finish Type: Mill
Insect ScreenInsect Screen Location: Internal Insect Screen Type: Stainless
FiltersFilter Material: Aluminum Filter Type: Permanent Filter Supplier: GreenheckFilter Removal: Rear Filter Depth (in.): 2.000
WarrantyProduct Warranty: 1 Yr (Standard)
Summary
ID # Tag Qty. W (in.) H (in.) Free Area (ft2) Sect. Wide Sect. High Sect. Ship
3-1 24 132.000 66.000 30.13 3 1 72
PerformanceID # Application Volume (CFM) Press. Drop (in. wg) Free Area Velocity (ft/min) BPWP (ft/min)
3-1 Intake 25,000 0.096 798 834
**Calculated pressure drop does not include the effects of screens, filters or other accessories
Larger openings may require field assembly of multiple louver panels to make up the overall opening size. Individual louver panels are designed to withstand windloads up to a maximum of 25
PSF (size and configuration dependent). Design, materials and installation of structural reinforcement required to adequately support large sections or multiple section assemblies within a large
opening are not provided by Greenheck. Unless specifically indicated, the following are NOT included in the quote provided: structural steel, installation hardware (anchors, angle clips,
continuous angles, shims, fasteners, inserts, backer rod and sealant), field measuring and/or installation, miscellaneous flashing, trim or enclosures, blank off panels, mullion covers or mullion
hardware, hinged frames or removable subframes, custom bird/insect screen, 3-coat, metallic and/or exotic paint finishes, bituminous paints for unlike metals, any applicable taxes, stamped and
sealed structural calculations seismic calculations or job specific engineered submittal drawings.
26/05/2Printed Date:PEPSICO - 22Job:
LOUVERS PROCMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 1
5/22/2018 Submittals Equipos GREENHECK
17/17
Louvers Product Limited Warranty
Thank you for purchasing Greenheck louvers. Greenheck warrants this equipment to be free from defect in material and workmanship for a period of
yearfrom the date of product shipment. Any units or parts, which prove defective during the warranty period, will be repaired or replaced at our optio
when returned to our factory, transportation prepaid. Unless agreed upon otherwise Greenheck will not be held responsible for costs associated with
removal or installation of product(s).
The legal remedies described in this Limited Warranty are the sole exclusive remedy of Customer. This limited warranty will be void if payment from
Customer is not received within a commercially reasonable time frame. GREENHECK MAKES NO OTHER WARRANTY, EITHER EXPRESS OR
IMPLIED, REGARDING ITS PRODUCTS, OR ITS SELECTION AND APPLICATION, INCLUDING, BUT NOT LIMITED TO, COMPLIANCE WITH
BUILDING CODES, SAFETY CODES, LAWS, MERCHANTABILITY OR FITNESS OR A PARTICULAR PURPOSE. This limited warranty is extende
solely to the Customer. It is nontransferable and non-assignable, and the Customer shall not permit or authorize its employees, agents, representativ
or customers to claim, represent or imply that this limited warranty extends or is available to anyone other than the Customer.
In the event of material breach by the Customer of any of the conditions of this warranty, Greenheck shall have no liability for and product failure clai
Failure to pay Greenheck in full for original services will automatically make this warranty null and void.
Greenheck will not be held liable for incidental or consequential damages of any kind. The limited warranty of product(s) replaced or repaired under
limited warranty shall be limited to the remainder of the original warranty period. Greenheck reserves the right to reasonable field access to diagnos
and repair any product alleged to be defective. This limited warranty may not be modified by anyone and may not be changed by such things as
purchase order forms or acceptance forms, unless otherwise agreed upon by Greenheck.
This limited warranty is provided in lieu of any other warranty requirements or obligations, including, but not limited to, those within project specificati
All notices and claims given under or pursuant to this agreement shall be in writing and sent by certified or registered mail, postage prepaid, return
receipt requested to: Greenheck, Attn: Louver Sales, 525 Western Road, Schofield, WI 54476.
By proceeding to use our products and services on your project, you accept the terms of these limited warranties.
26/05/2Printed Date:PEPSICO - 22Job:
LOUVERS PROCMark:
CAPS 4.14.1443 C:\Proyectos 2014\PEPSICO - 220514.gfcj Page 2