SUBROModFtJ4260B.pdf

7/24/2019 SUBROModFtJ4260B.pdf

http://slidepdf.com/reader/full/subromodftj4260bpdf 1/20

Original Instruments and Implants of the Association

for the Study of Internal Fixation — AO / ASIF

Modular Foot System



Modular Foot System

The Synthes Modular Foot Systemprovides implants and instrumentsspecifically sized for fractures,osteotomies, replantationsand fusions of small bones,including the foot and ankle.



Features

• Modules for 2.0 mm/2.4 mm, 2.7 mmand 3.5 mm/4.0 mm plates and screws

and for Kirschner wires

• Stainless steel implants for strength andease of removal

• Self-tapping screws for easy insertion

• Anatomy-specific implants designed forfoot procedures

• Low-profile plates reduce soft tissue irritation

• Cut-to-length plates minimize inventory

• Large graphic case holds all modulesin the Modular Foot System



2

2.0 mm LC-DCP ™ Plates

Tapered ends for easy insertion

HOLES LENGTH THICKNESS

4 27 mm 1.2 mm

6 39 mm 1.2 mm

8 51 mm 1.2 mm

2.0 mm/2.4 mm Foot Module Set [105.102]

2.0 mm Implants

2.0 mm T-Plate, 3 holes head,10 holes shaft LENGTH THICKNESS

65 mm 1.2 mm

2.0 mm Condylar Plates

• Fixed blades• Can be cut to create an oblique L-plate


Left 7 39 mm 1.2 mm

Right 7 39 mm 1.2 mm

2.0 mm Cortex Screws, self-tapping

8 mm–40 mm (2 mm increments)

HEAD THREAD CORE THREADSIZE DIAMETER DIAMETER PITCH

3.5 mm 2.0 mm 1.4 mm 0.6 mm




• Accepts a 1.8 mm Buttress pin to createa fixed-angle device

• Fixed blades


Left 8 57 mm 1.25 mm


2.4 mm T-Plate, 3 holes head,

10 holes shaft LENGTH THICKNESS

66 mm 1.2 mm

2.4 mm Cuboid Plate

Accepts 2.0 mm and 2.4 mm Cortex Screws

THICKNESS

1.2 mm

2.4 mm Implants

2.4 mm LC-DCP ™ Plates

Tapered ends for easy insertion


4 35 mm 1.7 mm

6 51 mm 1.7 mm

8 67 mm 1.7 mm




4.0 mm 2.4 mm 1.7 mm 1.0 mm

2.0 mm

2.4 mm



4

2.7 mm Foot Module Set [105.103]

2.7 mm LC-DCP ™ PlatesHOLES LENGTH THICKNESS

4 37 mm 2.6 mm

6 55 mm 2.6 mm


Fixed blades


Left 7 57 mm 1.5 mm


2.7 mm Calcaneal Reconstruction PlatesHOLES LENGTH THICKNESS

8 64 mm 2.5 mm

9 72 mm 2.5 mm


10 mm–40 mm (in 2 mm increments)45 mm–55 mm (5 mm increments)


5.0 mm 2.7 mm 1.9 mm 1.0 mm

2.7 mm L-Plates, 3 holesL ENGTH THICKNESS

Left 32 mm 1.0 mm

Right 32 mm 1.0 mm

Oblique left 34 mm 1.0 mm

Oblique right 34 mm 1.0 mm

Quarter-Tubular Plates with collared holesHOLES LENGTH THICKNESS

4 31 mm 1.0 mm

6 47 mm 1.0 mm

2.7 mm T-Plate, 3 holesLENGTH THICKNESS

32 mm 1.2 mm

2.7 mm Hind/Midfoot PlatesHOLES LENGTH THICKNESS

5 31 mm 1.2 mm

8 45 mm 1.2 mm

2.7 mm



3.5 mm/4.0 mm Foot Module Set[105.104]

One-Third Tubular Plates with Collared HolesHOLES LENGTH THICKNESS

4 49 mm 1.0 mm

5 61 mm 1.0 mm

6 73 mm 1.0 mm

8 97 mm 1.0 mm

Calcaneal PlatesLENGTH THICKNESS

60 mm 1.2 mm

70 mm 1.2 mm

Also AvailableCalcaneal Plates accept 3.5 mm Cortex, 3.5 mm Cannulated and4.0 mm Cancellous Bone Screws. They may be used for eitherright or left calcaneus.

Calcaneal Y-PlateLENGTH THICKNESS

87 mm 2.0 mm

3.5/4.0 mm



6

3.5 mm/4.0 mm Screw Set for Modular Foot System[105.106]


10 mm–50 mm (2 mm increments)55 mm–75 mm (5 mm increments)


6.0 mm 3.5 mm 2.4 mm 1.25 mm



65 mm–95 mm (5 mm increments)HEAD THREAD CORE THREADSIZE DIAMETER DIAMETER PITCH

6.0 mm 4.0 mm 2.9 mm 1.25 mm

Washer, 7.0 mm*

For 3.5 mm and 4.0 mm screws

*outer diameter

4.0 mm Cancellous Bone Screws, partially threaded

30 mm–50 mm (5 mm increments)HEAD THREAD CORE THREADSIZE DIAMETER DIAMETER PITCH

6.0 mm 4.0 mm 1.9 mm 1.75 mm

4.0 mm Cancellous Bone Screws, fully threaded


45 mm– 60 mm (5 mm increments)HEAD THREAD CORE THREADSIZE DIAMETER DIAMETER PITCH

6.0 mm 4.0 mm 1.9 mm 1.75 mm



Kirschner Wire Implant Module [105.105]

Features

• Various wire sizes (1.0 mm, 1.25 mm, 1.6 mm and2.0 mm diameters) for a wide range of applications

• Multiple tip configurations for broad range of indications

• Metric-to-English diameter gauges for easy conversionand size identification

• Autoclavable protective caps color-coded for size identification

• Module size allows set to be sterilized in a small office autoclave

• K-wires made from implant quality 316L stainless steel

Various sizes and tip configurations

Metric-to-English diameter

gauges

Graphic case can

accommodate 20 K-wires per pocket

Color-coded to distinguish size

(red=1.6 mm, blue=2.0 mm)

Ease of removal

Protective caps can besterilized with module

1.0/1.25 mm

1.6 mm

2.0 mm



8

Low profile Plates can be contoured for

anatomic fit

Plates can be cut to length

Modular Foot System Instrument Set [105.101]

The insertion instruments are storedin a lightweight tray.

• Screwdrivers and blades

• Universal drill guides anddouble drill sleeves

• Depth gauges

• Bending and cutting pliers

• Screw and plate holding forceps



Supplemental Instrument Set forModular Foot System [105.107]

The supplemental instrument tray stores soft-tissue and fracturemanipulation instrumentsdesigned for the foot.

• Hohmann retractors

• Forceps

• Sharp hook

• Elevators

Hohmann Retractor, 8 mm, narrow tip,215 mm [399.197]

Longer handle allows greater accessto surgical site

90° Periosteal Elevator [399.361]

90° bend for tarsal fragment manipulation

Sharp Hook, small taper [319.391]

Hohmann Retractor, 8 mm, round tip,215 mm [399.195]

Longer handle allows greater accessto surgical site



10

Modular Foot System, complete [105.100]

Graphic Case forModular Foot System

[690.354]

Modular Foot System, complete [105.100]

consists of the following sets:

105.101 Modular Foot Instrument Set

105.102 2.0 mm/2.4 mm Foot Module Set

105.103 2.7 mm Foot Module Set

105.104 3.5 mm/4.0 mm Foot Module Set105.105 Kirschner Wire Implant Module Set

105.106 Screw Set for Modular Foot System

105.107 Supplemental Instrument Set forModular Foot System

Sterilization Parameters for Set [105.100]

For more information please see graphic case package insert

Method Cycle Temperature Exposure Time

Steam Gravity 132°–135°C 22 MinutesDisplacement (270°– 275°F)

(Wrapped)

Steam Prevacuum 132°–135°C 8 Minutes(Wrapped) (270°– 275°F)



Modular Foot Instrument Set [105.101]

Tray and Lid

690.354.30 Modular Foot Instrument Tray

690.354.50 Lid, for Modular Foot Instrument Tray

Instruments

310.972 Countersink, for 2.0 mm and 2.4 mm screws

311.01 Handle, with mini quick coupling

313.94.96 2.4 mm Cruciform Screwdriver,with Holding Sleeve

314.67.97 Cruciform Screwdriver Shaft,with Holding Sleeve

319.006 Depth Gauge, for 2.0 mm and 2.4 mm screws

323.201 2.0 mm Universal Dril l Guide

323.202 2.4 mm Universal Dril l Guide

347.985 Screw and Plate Forceps

391.962 Bending/Cutting Pliers

391.963 Universal Bending Pliers

319.09 Depth Gauge, for 3.5 mm and 4.0 mm screws

314.075 Hexagonal Screwdriver, 2.5 mm,with Ergonomic Handle

392.00 Bending Iron, for 1.25 mm, 1.6 mm,2.0 mm Kirschner Wires

314.08 Holding Sleeve (for 2.7 mm screws)

314.09 Holding Sleeve (for 3.5 mm and4.0 mm screws)

391.82 Wire Bending Pliers, 160 mm

312.20 2.0 mm Parallel Drill Guide andDrill Sleeve

323.26 2.7 mm Universal Drill Guide

323.36 3.5 mm Universal Drill Guide312.401 4.0 mm/2.9 mm Double Drill Sleeve



12

Supplemental Instrument Set forModular Foot System [105.107]

Tray and Lid

690.354.70 Supplemental Instrument Trayfor Modular Foot System

690.354.80 Supplemental Instrument Lidfor Modular Foot System

Instruments

399.481 Periosteal Elevator, 3 mm, curved blade,round edge

399.48 Periosteal Elevator, 3 mm, curved blade,

straight edge399.361 Periosteal Elevator, 90°blade,

180 mm length

319.391 Sharp Hook, small taper, 152 mm length

399.195 Hohmann Retractor, 8 mm, round tip,215 mm length

399.197 Hohmann Retractor, 8 mm, narrow tip,215 mm length

399.97 Reduction Forceps, with points, ratchet,130 mm length

398.96 Stagbeetle Forceps, 125 mm length

399.94 Reduction Forceps, with points, ratchet,174 mm length




Also Available

310.141 1.5 mm Drill Bit, mini quick coupling, 65 mm†




† Intended for hand-drilling. Use with the Handle with

mini quick coupling [311.01]

* Module can accommodate up to two of each plate style

Implants

201.638 – 2.4 mm Cortex Screw, self-tapping,201.650 8 mm– 20 mm (2 mm increments),

4 ea.


3 ea.

201.808 – 2.0 mm Cortex Screw, self-tapping,201.820 8 mm –20 mm (2 mm increments),

4 ea.


3 ea.

201.980 1.8 mm Buttress Pin, 30 mm, 3 ea.

243.234 2.0 mm T-Plate, 3 holes head,10 holes shaft, 65 mm

243.584 2.0 mm LC-DCP Plate, 4 holes,27 mm



243.61 2.0 mm Condylar Plate, 7 holes,left, 39 mm

243.62 2.0 mm Condylar Plate, 7 holes,right, 39 mm

249.916 2.4 mm Condylar Plate, 8 holes,right, 57 mm

249.917 2.4 mm Condylar Plate, 8 holes,left, 57 mm

249.919 2.4 mm T-Plate, 3 holes head,10 holes shaft, 66 mm

249.921 2.4 mm Cuboid Plate




Instruments

312.92 1.8 mm Threaded Drill Guide, 2 ea.

310.16 1.5 mm Drill Bit, quick coupling,110 mm, 2 ea.




2.0 mm/ 2.4 mmFoot Module* [304.066]



14

Implants

202.810 – 2.7 mm Cortex Screws, self-tapping202.845 10 mm–45 mm, 3 ea.

202.850 – 2.7 mm Cortex Screws, self-tapping202.855 50 mm–55 mm, 2 ea.

242.04 Quarter Tubular Plate with collaredholes, 4 holes, 31 mm

242.06 Quarter Tubular Plate with collared,holes, 6 holes, 47 mm



242.31 2.7 mm L-Plate, 3 holes, left,32 mm

242.32 2.7 mm L-Plate, 3 holes, right,32 mm

242.33 2.7 mm L-Plate, 3 holes,oblique left, 34 mm

242.34 2.7 mm L-Plate, 3 holes,oblique right, 34 mm

242.41 2.7 mm T- Plate, 3 holes, 32 mm

242.535 2.7 mm Hind/Midfoot Plate,5 holes, 31 mm

242.536 2.7 mm Hind/Midfoot Plate,8 holes, 45 mm

242.61 2.7 mm Condylar Plate,7 holes, left, 57 mm

242.62 2.7 mm Condylar Plate,7 holes, right, 57 mm

245.98 2.7 mm Calcaneal ReconstructionPlate, 8 holes, 64 mm

245.99 2.7 mm Calcaneal ReconstructionPlate, 9 holes, 72 mm

Instruments



310.87 Countersink, for 2.7 mm Cortex Screws

311.26 Tap for 2.7 mm Cortex Screws,100 mm

2.7 mm Foot Module Set [105.103]

2.7 mm Foot Module Case[305.067]




Implants

241.34 One-Third Tubular Plate, with collar,4 holes, 49 mm




Instruments

310.23 2.5 mm Drill Bit, quick coupling,180 mm, gold, 2 ea.




310.89 Countersink, for 3.5 mm Cortex and4.0 mm Cancellous Bone Screws

311.33 Tap for 3.5 mm Cortex Screws,gold, 180 mm

311.400 Tap for 4.0 mm Cortex Screws,150 mm

311.34 Tap for 4.0 mm Cancellous BoneScrews, 110 mm

Also Available

241.61 Calcaneal Plate, 60 mm

241.62 Calcaneal Plate, 70 mm

241.65 Calcaneal Y-Plate, 87 mm

3.5 mm/4.0 mm Foot ModuleCase [305.068]



16

Implants

Kirschner Wires, with trocar point, 150 mm,(10/pkg.)

292.10 1.0 mm

292.12 1.25 mm

292.16 1.6 mm

292.20 2.0 mm

292.50 1.0 mm, trocar points on both ends




292.73 1.6 mm, with 15 mm thread length

292.79 2.0 mm, with 15 mm thread length

Accessories

Protective Caps, (10/pkg.)

392.178 for 1.6 mm Kirschner Wires

392.179 for 2.0 mm Kirschner Wires

Also Available

392.177 Protective Caps for 1.0 mm and1.25 mm Kirschner Wires (10/pkg.)

Kirschner Wire Implant Module Set [105.105]

Kirschner Wire ImplantModule Case [305.069]



Implants

204.810 – 3.5 mm Cortex Screws, self-tapping204.875 10 mm – 75 mm, 3 ea.

206.010 – 4.0 mm Cancellous Bone Screws, fully threaded206.060 10 mm – 60 mm, 2 ea.

206.424 – 4.0 mm Cortex Screws, self-tapping206.470 24 mm – 70 mm, 3 ea.

206.475– 4.0 mm Cortex Screws, self-tapping206.495 75 mm – 95 mm, 2 ea.

207.030 – 4.0 mm Cancellous Bone Screws, partially threaded

207.050 30 mm – 50 mm, 2 ea.219.98 Washer, 7.0 mm, 4 ea.

Instrument

319.97 Screw Forceps

3.5 mm/4.0 mm Screw Set for Modular Foot System[105.106]

Screw Rack forModular Foot Set

[690.354.60]



SYNTHES (USA)1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056

SYNTHES (CANADA) LTD.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185

Date post:	22-Feb-2018
Category:	Documents
Upload:	marjuni
View:	218 times
Download:	0 times

SUBROModFtJ4260B.pdf

Documents