Sum

mit

ST7

130

The Summit ST7130 Scissor Lift is the Ultimate Space Saver! At only two metres wide, this hoist can be installed anywhere a vehicle will fit. With its extra low profile design, this hoist is

perfect for lowered vehicles.

The Summit ST7130 has undergone an extensive independent appraisal by an Australian engineer and has been approved to

the Australian Standard.

3 Tonne Full Height Scissor Lift

“The Ultimate Space Saver”

Approved To TheAustralian Standard

Specifications ST7130Max. Lift Capacity 3000 kgMax. Lift Height 1850 mmLowest Height 115 mmOverall Length 1980 mmOverall Width 2000 mmOverall Height 115 mmPower Supply 3 Phase

Summit ST7130

E & OE

Hoist Features• 3 Tonne Lift Capacity• Extra Low Profile Design• Space Saving Design – 2 m Wide• Excellent Under Vehicle Access• Lockable Run-Up & Run-Off Ramps• Operator Control Console

Extra Low Profile DesignWith its extra low profile design, the ST7130 sits only 115 mm high when in its lowered position. Perfect for low vehicles!

Lockable RampsThe Run-Up & Run-Off Ramps can be locked into a horizontal position to increase the platform length. Perfect for vehicles with a longer wheel base!

Air Operated Locking SystemThe ST7130 uses an air operated safety lock system for positive safety. At the push of a button, the hoist can be locked at any height. Also Consider...

• Twin Hydraulic Rams • Powder Coat Finish• Conditional Warranty

• 60 Months Structural• 12 Months Parts• 12 Months Labour

Twin Hydraulic RamsFor improved performance, the ST7130 comes standard with four powerful synchronising cylinders for the simple adjustment of balance.

Grease PointsFor easy maintenance & long life performance, every pivot pin on the ST7130 is easily accessible for greasing.

Unit 2/11 Christine Place, Capalaba, QLD, 4157Ph: 07 3390 3933 Fax: 07 3245 3269

www.precisionautomotive.com.au

ST7530 Mid-Rise Scissor Lift

Control ConsoleWith a four button control console the technician can operate the hoist at the touch of a button. Also features a unique two step lowering process.

ST8240 Wheel Alignment Scissor Lift

Unit 4 / 36 Peachtree RoadPenrith, New South Wales, 2750

www.autoquip.com.auAutoquip Australia

Phone: 02 4721 0633 Fax: 02 4721 0733