SUNDOWN Prices do not include dealer set up or …AE-04 Electric actuator for P-64-IV and P-72-IV...

Jan 2020

SUNDOWN

Model Description Wt List Price

FOB JSW

Forestry Grapple

GR40 319 1,330.00

• Add bolt on mounting kit • Cylinder & hoses included

Bolt on Mounting Kits

224017 Universal mounting 62 150.00

224013 Euro mounting 62 285.00

224012 Alo type 3 mounting 62 70.00

224026 JD 400 & 500 mounting - available 2016 225.00

Optional

224022 18 90.00

224024 Rock Plate 20 50.00

9023-08-08 Adapter - ½" male NPT x ½" BSP female 21.00

adapters for the GR40 grapple to adapt from the hose ends

to ½" male pipe thread so you can use flat face couplers

when installing on a Skid Steer

• Moving logs • Loading logs on trailers & trucks

• Hauling brush • Removing & hauling small stumps

• Loading portable sawmills • Culvert loading & placement

• Loading firewood processors • Handling steel I-beams & pipes

• Building stone walls

Uses for GR40 Sundown Forestry Grapple

Extension tips (set of 2) - 5"extra length, hardware

included. Available February 2015

Forestry Grapple with maximum grapple opening of 40"

and lift capacity of 2,200 lbs with suitable tractor or skid

steer.

Printed price sheets are for spec reference only. VERIFY ALL PRICES at www.jswoodhouse.com or call for price.

SUNDOWNPrices do not include dealer set up or freight

Jan 2020

SUNDOWN

Bale Grabbers

Color

Yellow CHL-1-SS CHS-2-SS CHK-2-SS

Yellow CHL-1-EURO CHS-2-EURO CHK-2-EURO

Green CHL-1-JD CHS-2-JD CHK-2-JD

List Price 1,840.00 2,050.00 2,500.00

Overall dimensions:

Length 40" / 1020 mm 40" / 1020 mm 40" / 1020 mm

Width 47" / 1200 mm 47" / 1200 mm 47" / 1200 mm

Height 33" / 850 mm 33" / 850 mm 33" / 850 mm

Weight 330 lb / 150 kg 396 lb / 180 kg 550 lb / 250 kg

Operating range - arms spread 31" - 65" 31" - 85" 26" - 81"

800 mm - 1620 mm 800 mm - 2170 mm 650 mm - 2050 mm

Arms setup control Hydraulic control system

Grabber's load capacity - max ** 2200 lb / 1000 kg 2200 lb / 1000 kg 2200 lb / 1000 kg

** assuming permissible load capacity of vehicle lifting system

Hydraulic system working pressure 1450 - 2750 PSI / 10 - 19 bar

Cylinders 1 cyl. 2 cyl. 2 cyl.

SKID STEER Mounting

No credit is allowed for return of tractor loader hydraulic couplers.

Part # Description List Price

18X15 18 x 1.5mm Metric Adaptor - 2 required 4.50

Bale Grabbers are supplied with hoses and hydraulic (male & female) couplers for most tractor loader

mounting. For attaching to Skid Steer (2) PN #18X15 (18 x 1.5mm) adaptors (½" male pipe thread on

coupler end) are required. Flat Faced Skid Steer couplers with ½" female pipe thread must be sourced

locally depending on make & model of the skid steer.

Model with Bobcat

Mounting

Model with Euro

Mounting

Model with JD

400/500 loader



April 2020

SUNDOWN

Inverted Snow Blowers Non-Commercial Category

INCLUDED IN BASE PRICE

Chute (base on antifriction ring.

Chute rotation kit.

Cylinder or motor for hydraulic kit.

Standard PTO shaft.

Welded scraper blade.

Adjustable skid shoes.

Manual Deflector

Motor Electric

Working Rotation Rotation Freight

Model HP Width Wt List Price List Price In

P-64-IV 18 to 30 64" 470 5,341.00 - 160.00

P-64-IV-E 18 to 30 64" 470 - 5,295.00 160.00

P-72-IV 18 to 30 72" 502 5,411.00 - 175.00

P-72-IV-E 18 to 30 72" 502 - 5,365.00 175.00

P-74-IV 30 to 50 74" 705 6,837.00 - 185.00

P-80-IV 30 to 50 80" 740 6,966.00 - 185.00

Hydraulic Motor Rotation Electric Rotation

Select Options and add to base Price List Price

25TR04 Hydraulic cylinder for P-64-IV and P-72-IV (for CPUSI-4872-IV chute) 132.00

and for P-74-IV and P-80-IV (for CPUSI-7480-IV chute)

AE-04 Electric actuator for P-64-IV and P-72-IV 621.00

PKB-PU6472-IVRM Hose Kit for Hydraulic Motor Rotation for P-64-IV and P-72-IV 195.00

PKB-PU7480-IVRM Hose Kit for Hydraulic Motor Rotation for P-74-IV and P-80-IV 198.00

Manual Deflector Cylinder Deflector Electric Deflector

Hoses not included - assembly required

SUNDOWN

Jan 2020

SUNDOWN

Model Blade # of HP Wt List Price

Width Diam Blades Req'd FOB JSW

Disc Harrows 16-12-GSBC-YK 4 ½’ 16" 12 20 Angle Frame 400 1,175.00

16-16-GSBC-YK 5 ½’ 16" 16 25 Angle Frame 460 1,350.00




DH300-60C 5' 18" 16 30 Box Frame 735 2,300.00

DH300-72C 6' 18" 20 35 Box Frame 815 2,535.00

DH300-84C 7' 18" 24 40 Box Frame 900 2,685.00

DH300-96C 8' 18" 28 45 Box Frame 985 3,215.00

C = Notched front / Plain rear

Box Blades - Sub Compact

BB100-48 48” Box Blade – 4 Shanks 248 753.00

BB100-60 60” Box Blade – 4 Shanks 258 891.00

Box Blades - Standard Duty

BB200-48 48” Box Blade – 4 Shanks Standard Duty 397 889.00

BB200-60 60” Box Blade – 5 Shanks Standard Duty 440 1,023.00



BB300-96 96” Box Blade – 8 Shanks Medium Duty 752 1,750.00

Rear Blades - Sub Compact

RB100-48 4' Rear Blade 166 448.00

RB100-60 5' Rear Blade 176 498.00

Rear Blades - Offset & Tilt - 6 Way - Standard Duty

RB220-60 5’ Rear Blade 277 784.00

RB220-72 6’ Rear Blade 274 852.00

RB220-84 7’ Rear Blade 355 949.00

Rear Blades - Offset & Tilt - 6 Way - Heavy Duty

RB40-72 6’ Rear Blade 503 1,522.00

RB40-84 7’ Rear Blade 541 1,725.00

RB40-96 8’ Rear Blade 578 1,810.00

Note: RB40 Rear Blade fitted with Ratchet adjustment. Ratchet can be removed by dealer and

fitted with 3" x 10" cylinder and hoses supplied locally. Kick Stand included.



Jan 2020

SUNDOWN


FOB JSW

Landscape Rakes - Sub Compact

LR100-48 4' Landscape Rake - LR999-01 does not fit LR100-48 168 667.00

LR100-60 5' Landscape Rake 178 764.00

Landscape Rakes - Standard Duty

LR200-60 5’ Landscape Rake 195 780.00




LR999-01 Gauge Wheel Setp - fits LR100-60 only & all LR200 78 497.00

Coring Overall

Lawn Aerators - Core Plug Width Width

AE200-48 42" 48" Core Plug Aerator 320 1,644.00





Miscellaneous Implements

CA-G-C Carry-All 65 250.00

BP-G-C Boom Pole, 500# 1ift cap – Non moving 60 190.00

CV-G-1-C One Row “C” Tine Cultivator 100 405.00

DS-30-C Dirt Scoop – 30” 272 720.00

MB-G-C Middlebuster See model 100MB Sundown

Middlebuster

SUB-G-C Subsoiler – 14” Ripping Depth See model 100 Sundown

Economy Ripper

DB-YK Disc Bedder - 14" blades, upto 48" working width 110 535.00

TM-GN 3-Point Trailer Mover with 2-5/16" ball 70 270.00



Jan 2020

SUNDOWN

Model Spreading Hopper Hopper Wt List Price

liters cu ft bushel lbs Width Top width Height Cat FOB JSW

Conical PL Fertilizer Spreaders with Poly Hoppers - with Stainless Steel Disc & vanes

PL180 169 5.9 4.7 441 49' 35" 26" Cat I 119 570.00

PL400 297 10.4 8.3 771 49' 41" 32" Cat I 132 580.00

PL500 361 12.6 10.1 992 49' 43" 35" Cat I 136 590.00

619.012 PL agitator - Sundown (supplied standard as of 11/21/19) Included

PL model set up, subject to availability net 48.00

Conical P Fertilizer Spreaders with Metal Hoppers - with Stainless Steel Disc & vanes

Metal Hopper P Spreaders stocked in limited quantities. Color - Red

P180 169 5.9 4.7 441 49' 35" 26" Cat I 119 490.00

P400 297 10.4 8.3 771 49' 41" 32" Cat I 132 505.00

P500 361 12.6 10.1 992 49' 43" 35" Cat I 136 510.00

619.012 P agitator - Sundown (supplied standard as of 11/21/19) Included

P model set up, subject to availability net 48.00

Conical PLS Salt Spreaders with Poly Hoppers

PLS180 169 5.9 4.7 441 49' 35" 26" Cat I 135 860.00

PLS400 297 10.4 8.3 771 49' 41" 32" Cat I 137 880.00

PLS500 361 12.6 10.1 992 49' 43" 35" Cat I 141 915.00

P / PL / PLS Accessories

619.012 PL & P Agitator - replacement price 19.00

619.111 Hydraulic Opening Double acting cylinder 305.00

642.010 Hopper Grid 72.00

620.101 Salt Limiter 217.00

902.001 Plastic Cover (180) 68.00

902.003 Plastic Cover (400 - 500) 75.00

311000 PTO included with spreader 90.00

620.102 1 Row Side Conveyor 270.00

620.106 2 Row Side Conveyor 353.00

P-PRO Dry Sand / Salt Spreaders - with Stainless Steel Hopper

Min HP

P-PRO-180 180 6.4 5.0 441 3' - 46' 20 HP Cat I 119 1,240.00

P-PRO-300 300 28.0 8.5 705 3' - 46' 20 HP Cat I 128 1,290.00

902001 Cover for P-PRO-180 68.00

902003 Cover for P-PRO-300 75.00

619010 Hydrauic Opening • Single acting cylinder, see notation 188.00

620120 Light Kit 186.00

620122 Standard Stainless Steel Deflector Included

PL / PLS

PL / PLS

PL / PLS

PL / PLS

Capacities

Conical standard model with grid, Stainless Steel Disc & vanes, long lever, stainless steel shutters, heavy

duty gearbox (longer 6" output shaft) with chain agitator and PTO shaft. All models have stainless steel bolts

and nuts on disc.

Professional conical salt spreader equipped with stainless steel hopper, powder-coated frame with zinc-

based primer.

PL / PLS

Standard Equip: Stainless steel disc & fins / stainless steel standard limiter / stainless steel rear shield / salt

distributing part & nuts in stainless steel / steel hopper grid / salt/sand agitator / PTO shaft.

PL / P

PL / P

Models

PL / P

PL / P


SUNDOWN

Jan 2020

SUNDOWN



RE Twin Disc Spreaders

Min HP

RE-A-800 650 23.0 18.5 1655 40' - 60' 50 HP Cat II 414 2,975.00

Ext

Hopper Extensions for RE800 Height

609.176 200 30 24 2006 5" 215.00

609.174 250 32 22 2140 6.25" 285.00

609.177 450 39 31 2580 10" 405.00

PTP Pull Type Poly Hopper Spreader - w/ 16 x 6.50 tires & 1-7/8 coupler

- with Stainless Steel Disc & vanes List Price

Model Liters / Gal Cu ft Wt FOB JSW

PTP180-PL 166 / 44 5.9 441 40' - 46' 35" 26" 175 1,050.00

PTP400-PL 296 / 71 9.5 705 40' - 46' 41" 32" 183 1,075.00

619.012 P / PL / PTP Agitator Included

620101 Salt Limiter 173.00

PTB Pull Type Steel Hopper Spreader - w/ 18 x 9.50 - 8 tires & 2" coupler

PTB560 480 / 129 14.2 1060 40' - 53' 310 2,305.00

S70 Push / Pull Spreader

S70 70 2.5 2.0 155 3' - 20' 66 480.00

620138 optional Stainless Steel Deflector 117.00

Cement Mixer - 3-Pt w/hydraulic cylinder

List Price

Model Liters / Gal Cu ft Min HP Wt FOB JSW

80-320 321 / 71 11.3 20 HP Cat I 220 1,180.00

Approx Capacities

Square hopper spreaders with two discs equipped with three fins. Fins can ve set according to the spreading

specifications. RE is a professional spreader, high precison for wide areas. Includes hydraulic opening

Spreader includes #639.026 Stainless steel rear shield and #620.158 Agitator


SUNDOWN

Jan 2020

SUNDOWN



Pendulum Models - Series 2008

Economy Pendulum model w/PVC hopper & PTO

PDC-400C 386 13 11 925 27' - 50' 43.5" 36" Cat I 221 1,660.00

Standard Pendulum model w/normal frame, PTO & manual opening system

PDV-500 480 17 13 1155 27' - 50' 53" 25" Cat I/II 287 2,425.00

PDV-600 (order PDC-500 & #609.152 extension)

609.152 580 20 16 1450 27' - 50' 55" 32" Cat II 26 295.00

Standard Pendulum model w/normal frame, PTO & manual opening system

PDHV-800 850 30 24 2000 27' - 50' 70" 22" 375 3,070.00

PDHV-1000 (order PDHV-800 & #609.153 extension)

609.153 1050 37 29 2650 27' - 50' 72" 28" 22 200.00

PDHV-1250 (order PDHV-800 & #609.154 extension)

609.154 1250 44 35 2800 27' - 50' 72" 31" 55 285.00

Pendulum Accessories

902.003 Cover (only fits PDC-400C) 75.00

619.029 Hydraulic Opening Single acting cylinder 237.00

619.030 Hydraulic Opening Single acting cylinder 246.00

637.002 Hook shaped bar 68.00

619.041 Agitator (or 619.026) 68.00

304.101 Short spout, Full field spreading (30' - 50') 111.00

304.102 480.00

304.103 435.00

304.104 409.00

304.105 400.00

304.107 Spreading right hand side (20') inquire

610.050 Seed Filter Spreading Kit 47.00

304.100 Standard Long Spout - (L = 22") 99.00

PDC-PDV-PDHV

PDC-PDV-PDHVShort spout, conveyed spreading for vineyards &

orchards (6' - 33') Rows (5'), stainless steel - (L = 22")

PDC-PDV-PDHV

PDV

PDC-PDHV

PDHV

PDV-PDHV

Models

Regulating key for pendulum gearbox allows to set the spreading width easily

PDC

Capacities

PDC-PDV-PDHV

PDC-PDV-PDHV

Short spout, conveyed spreading for vineyards &

orchards (3' - 15') Rows (3'), stainless steel - (L = 6")

Short spout, full spreading for vineyards & orchards (6' -

13'), stainless steel - (L = 8")

Short spout, full salt spreading (16' - 20'), stainless steel -

(L = 13")

PDC-PDV-PDHV

PDC-PDV-PDHV

PDC-PDV-PDHV


SUNDOWN

Jan 2020

SUNDOWN

Tillers All Sundown Tillers are equipped with slip clutch PTO, 6 blade rotor flange, gear side drive, solid

mast A-Frame. UL, UM Tillers are Quick Hitch compatible.

Tilling Min - Max Cat Tilling Wt List Price

Model Width Engine HP # tines RPM Depth FOB JSW

UL-36 36" 15 - 40 hp I 24 540 6.5" 337 1,725.00

UL-42 42" 20 - 40 hp I 30 540 6.5" 368 1,770.00

UL-48 48" 20 - 40 hp I 36 540 6.5" 399 1,815.00

UL-60 60" 25 - 40 hp I 42 540 6.5" 441 2,000.00

UM-60 65" 35 - 50 hp I 48 540 7" 627 2,430.00

UM-72 72" 35 - 50 hp I 54 540 7" 683 2,480.00

UH-60 65" 40 - 65 hp I/II 42 540 7.5" 860 2,670.00

UH-72 72" 45 - 65 hp I/II 48 540 7.5" 926 2,880.00

UH-84 84" 50 - 65 hp I/II 54 540 7.5" 990 3,070.00

VH equipped with multi speed gearbox

VH-60 60" 50 - 95 hp II 36 540 9" 1280 3,650.00

VH-70 70" 60 - 95 hp II 42 540 9" 1370 3,895.00

VH-80 80" 70 - 95 hp II 48 540 9" 1464 4,095.00

VH-90 89" 80 - 95 hp II 54 540 9" 1557 4,395.00

Optional VH Blade Flange Kit

FLG-VH 4 lb 25.00 each

VH-60 requires 12 flange half




UHH equipped with multi speed gearbox

UHH-100 100" 90 - 140 hp II/III 60 540 / 1000 10" 2339 8,395.00

UHH-120 120" 100 - 140 hp II/III 72 540 / 1000 10" 2573 8,650.00

5059 Set of sides for UHH 499.00

diameter diameter

Bolt " / mm " / mm

Tiller RH blade LH blade assy bolt hole ctr to ctr

UL C Blade 14040 14041 10192 .49/12.5 1.65 / 42

UM C Blade 1379 1380 10194 .49/12.5 1.73 / 44

UH C Blade 3127 3126 14337 .57 / 14.5 2.24 / 57

VH C Blade 23160 23159 23318 .57 / 14.5 2.24 / 57

Longer bolt assy when VH is fitted with double flange kit 23491

UHH C Blade 23160 23159 14337 .57 / 14.5 2.24 / 57

• Longer bolt assy when UHH is fitted with double flange kit 23491

• UHH-100 fitted with double flange kit as standard starting with Ser #AEBJ101101308

• UHH-120 fitted with double flange kit as standard starting with Ser #AHBJ101111577

Flange kit (flange half) with longer bolt assemblies (order required

quantity below)

Sundown Blade Chart - Tiller


SUNDOWN

Sundown Rollers for UHH TillersJan 2020

Cage Roller 2.50 / 100" D400 / 16" Hyd. without Leveller 2,005.00

Cage Roller 2.50 / 100" D400 / 16" Hyd. with Leveller 2,275.00



Cage Roller 2.50 / 100" D400 / 16" Mech. without Leveller 1,090.00

Cage Roller 2.50 / 100" D400 / 16" Mech. with Leveller 1,370.00


mechanical leveling adjustment Cage Roller 2.50 / 100" D450 / 18" Mech. with Leveller 1,510.00

& optional leveling bar assembly Cage Roller 3.00 / 120" D400 / 16" Hyd. without Leveller 2,160.00








Packer Roller 2.50 / 100" D450 / 18" Hyd. without Leveller 2,940.00

Packer Roller 2.50 / 100" D450 / 18" Hyd. with Leveller 3,250.00



Packer Roller 2.50 / 100" D450 / 18" Mech. without Leveller 1,900.00

Packer Roller Packer Roller 2.50 / 100" D450 / 18" Mech. with Leveller 2,220.00


Packer Roller 2.50 / 100" D500 / 20" Mech. with Leveller 2,310.00









Spike Roller 2.50 / 100" D490 / 19" Hyd. without Leveller 1,980.00

Spike Roller 2.50 / 100" D490 / 19" Hyd. with Leveller 2,235.00



Spike Roller 2.50 / 100" D490 / 19" Mech. without Leveller 1,125.00

Spike Roller Spike Roller 2.50 / 100" D490 / 19" Mech. with Leveller 1,390.00


Spike Roller 2.50 / 100" D540 / 21" Mech. with Leveller 1,505.00









List Price

Cage Roller pictured with

UHH Roller Meter / Inch

Diameter

mm / inch Hyd / Mech Leveller

Prices do not include dealer set up or freight

Jan 2020

SUNDOWN

Model Description Working HP Wt List Price

Width FOB JSW

Power Harrow SRPL-100 Single Speed 39" 45 + 772 3,410.00

SRPL-125 Single Speed 49" 50 + 860 3,690.00




SRP-100 Multi Speed 39" 45 - 60 1012 4,320.00

SRP-125 Multi Speed 49" 55 - 70 1100 4,615.00

SRP-150 Multi Speed 59" 60 - 75 1199 4,945.00

SRP-175 Multi Speed 69" 65 - 80 1298 5,250.00

SRP-200 Multi Speed 79" 70 - 85 1408 5,520.00

SRP-225 Multi Speed 89" 75 - 90 1496 5,850.00

SRP-250 Multi Speed 98" 80 - 95 1584 6,150.00

SRP-275 Multi Speed 108" 85 - 100 1672 6,450.00

SRP-300 Multi Speed 118" 90 - 105 1760 6,680.00

CR SRP-75 Cage Roller 345.00










PR SRP-75 Packer Roller 610.00





PR SRP-200 Packer Roller 1,075.00





SR SRP-75 Spike Roller 440.00












Jan 2020

SUNDOWN

Model Description Working HP Wt List Price

Width w/roller FOB JSW

Power Harrow M120-250 Multi Speed 98" 60 - 120 2490 8,085.00

M120-300 Multi Speed 118" 60 - 120 2710 8,920.00

* Roller included in weight of unit - NOT included in price, see below for roller price

6900 Kit Quick Fit M/C W/T Blade 250 (SPH-120) 1,360.00

6901 Kit Quick Fit M/C W/T Blade 300 (SPH-120) 1,620.00

Code Roller Type Model Dia Type

6656 Cage Roller 250 400 Fixed 810.00

6703 Cage Roller 250 400 Mechanical 1,310.00

6715 Cage Roller 250 400 Hydraulic 2,680.00







6690 Cage Roller 300 450 Fixed 1,035.00



6652 Packer Roller 250 450 Fixed 1,450.00

6695 Packer Roller 250 450 Mechanical 1,915.00

6707 Packer Roller 250 450 Hydraulic 3,285.00










6654 Spike Roller 250 490 Fixed 985.00

6699 Spike Roller 250 490 Mechanical 1,480.00

6711 Spike Roller 250 490 Hydraulic 2,850.00

6689 Spike Roller 250 540 Fixed 1,160.00











Jan 2020

SUNDOWN

Flail Mowers Mowing Manual Wt List Price

Width Min - Max Offset

Model mm/" Engine HP Cat # knives # hammers cm/" FOB JSW

FL - Rabbit Flail Mower - for sub compact tractors (grass mowing)

FL-85 830/32" 12-18 I 28 14 10/4" 220 1,470.00

FL-95 930/36" 16-20 I 28 14 10/4" 253 1,495.00

FL-105 1030/40" 20-30 I 36 18 10/4" 286 1,580.00

FL-115 1130/44" 20-30 I 40 20 10/4" 319 1,625.00

FL-125 1230/48" 25-35 I 40 20 10/4" 352 1,720.00

FL-135 1330/52" 25-35 I 44 22 10/4" 385 1,775.00

FL-145 1430/56" 25-35 I 48 24 10/4" 418 1,825.00

FL-165 1630/64" 30-40 I 52 26 10/4" 517 1,990.00

Comes with hammers & extra set of flail knives

For 2020, we are only stocking the modle FL125

Cutting Min - Max Cat pn #17228 pn #17295 Full right Wt List Price

Model Width Engine HP # knives # hammers side shift FOB JSW

FM-100 39" 30 - 60 hp I/II 24 12 Fixed 660 2,320.00

FM-130 51" 30 - 60 hp I/II 32 16 12" 806 2,590.00

FM-145 57" 30 - 60 hp I/II 36 18 12" 854 2,745.00

FM-160 63" 35 - 60 hp I/II 40 20 12" 907 2,820.00

FM-175 69" 40 - 60 hp I/II 44 22 12" 955 2,975.00

FM-205 80" 45 - 60 hp I/II 52 26 12" 1060 3,145.00

FM-220 87" 50 - 60 hp I/II 56 28 12" 1113 3,370.00

17266 Optional manual side shift jack 41.23

Mower

FL

FL

FM

FM

Spacer

JEF100.00.101A

JEF100.00.101B

17229

no spacer

Knife

JEFR105.102A

17228

Hammer

JEFR105.102B

17295

Bolt

JGB5782-86

JGB5782-86

17279 assy

17279 assy

Nut

JGB6184-86

JGB6184-86

Sundown Blade Chart - Mower

Hydraulic side shift standard, including cylinder & hoses.

All flail mowers are fitted with pn #17228 knives standard. Pn #17295 hammers

can be ordered & purchased as spare. Installation by dealer


SUNDOWN

Jan 2020

SUNDOWN

Model Description Blades HP Working Wt List Price

Width FOB JSW

Finishing Mower - Rear Mount, 540 RPM, Car I, 4 gauge wheels, front roller standard

SGM48 Rear discharge 3 20 - 50 48” 447 n/a

SGM60 Rear discharge 3 20 - 50 60" 497 1,960.00



Model Working HP Loading Cat Overall Overall Overall Wt List Price

Width Capacity Length Width Height FOB JSW

Compost Spreader - 3-Point Model - Hydraulic Drive

SHCS-15M 59" 30-45 1650 lbs Cat II 66" 78" 55" 1250 5,035.00

SHCS-18M 71" 40-50 1980 lbs Cat II 70" 70" 55" 1338 5,145.00

Thickness of compost layer: 0.1" - 0.4"

2 set of remotes required

Note: wheels not included with hydraulic drive model

Most prices issued at beginning of year and subject to change without notice. Verify price at www.jswoodhouse.com

SUNDOWN

Jan 2020

SUNDOWN

Model Working Lift Engine # knives Cat Wt List Price

Width HP L W H FOB JSW

Drum Mowers

Manual lift, mower folds vertical for transport, 540 rpm, 3-Pt hitch, PTO included.

DM135 1.35m/53" manual 30 4 I & II 110" 32" 31" 660 see Minos

DM165 1.65m/65" manual 50 6 I & II 110" 32" 31" 792 see Minos

DM185 1.85m/73" hydralic 75 6 II 122" 37" 33" 902 3,600.00

17-0041 Optional hydraulic lift kit for 1.65m hydraulic lift requires 1 set of remotes 415.00

17-0041-1 Hydraulic lift kit for 1.85m hydraulic lift requires 1 set of remotes included

Note: Recommended Gearbox oil: use a good grade 80 - 90 gear oil

Crated Dimensions



Jan 2020

SUNDOWN


Clamp-On Bucket Forks FOB JSW

BF-1000 1000 lb cap, 2”x3”x32” (pair) – ¾” lip opening 90 383.00

BF-1000W 1000 lb cap, 2”x3”x32” (pair) – 1-½” lip opening 90 401.00

BF-2000 2000 lb cap, 2”x3”x36” (pair) – ¾” lip opening 110 461.00

BF-2000W 2000 lb cap, 2”x3”x36” (pair) – 1-½” lip opening 110 481.00

BF-3000 3000 lb cap, 2”x4”x42” (pair) 150 541.00

BF-4000 4000 lb cap, 2”x4”x42” (pair) 170 681.00

BF-6000 6000 lb cap, 3”x5”x49” (pair) 275 930.00

BFS-2000 Fork Stabilizer, adjustable - stabilizes width of 25 117.00

BF-1000/2000 from 26" to 45"

BFS-4000 Fork/Bale Spear Stabilizer, adjustable - stabilizes width 28 137.00

of BF-3000/4000 & CBS-3000 from 27" to 45"

Clamp-On Trash Forks FOB JSW

TF48 48” Clamp-on Trash Fork 160 704.00





TF72W 72" Clamp-on Trash Forks w/7 - 2" x ¼" x 20" tines, 70" 315 811.00

wide. Will accept 1-9/16" max bucket & cutting edge thickness

Tooth Bars, Universal Mount FOB JSW

TB42 Tooth Bar, fits 42” buckets – 40” width 38 277.00






Roller Compactors, Pull Type and 3-Point Hitch Wt Filled Wt FOB JSW

SC6016 5' Pull Roller Compactor w/16" diameter drum 800 400 1,258.00

SC60163PT 5' 3-Pt Roller Compactor w/16" diameter drum 860 460 1,453.00

SC6020 5' Type Roller Compactor w/20" diameter drum 1100 500 1,507.00


SC72203PT 6' 3-Pt Roller Compactor w/20" diameter drum 1340 600 1,832.00





Jan 2020

SUNDOWN


FOB JSW

Universal Thumb (Fits select agricultural, skid steer, commercial backhoes and mini-excavators)

UAT-50 Universal Adjustable Thumb. Fits sub-compact 43 521.00

Backhoes. Works best on buckets that measure up

to 17” from pivot pin to the end of bucket teeth

UAT-100-R Universal Adjustable Thumb. Works best on buckets 56 606.00

that measure between 18” to 22” from pivot pin to the

end of bucket teeth

UAT-200 Universal Adjustable Thumb. Works best on buckets 110 933.00


end of bucket teeth

UAT-300 Universal Adjustable Thumb. Works best on buckets 281 1,791.00


end of bucket teeth

V-Rippers (Quick Hitch compatible) FOB JSW

R3-50 3-Shank Mini V-Ripper, 4”x 6”x 50” toolbar 420 1,653.00

Cat I Hitch, 1”x 23” shanks, heat treated points

R3-60 Same as R3-50, except w/ 4”x 6”x 60” toolbar 435 1,671.00

VR-227 2-Shank V-Ripper, 4”x 6”x 84” toolbar, Cat II Hitch 675 2,315.00

1”x 27” shanks, heat treated points & parking stands

VR-327 3-Shank V-Ripper, 4”x 6”x 84” toolbar, Cat II Hitch 750 2,611.00

1”x 27” shanks, heat treated points & parking stands

VR-334 3-Shank V-Ripper, 5”x 7”x 84” toolbar, Cat II/III Hitch 850 3,368.00

1-1/4”x 34” shanks, heat treated points & parking stands





HF27 Hard-faced 27" shanks and points - Priced per shank 110.00


VR-GW-S 1,208.00

VR-GW-D 1,433.00

Single Gauge Wheels for Models 534 / 734 - 15" x 8" rims

less tires

Double Gauge Wheels for Models 534 / 734 - 15" x 8"

rims less tires



Jan 2020

SUNDOWN


Single Shank Rippers FOB JSW

100 85 350.00

615 12" Furrower, converts 100 to a Middle Buster 10 44.00

100MB 85 360.00

200 130 646.00

300 240 806.00

OptionsHF23 Hard-faced 23" shanks and points - Priced per shank 101.00


3-Pt Forklifts FOB JSW

1200 1200 lb cap, 2”x4”x 3/16”x41” Fork, Cat I pins 115 369.00

1500 1500 lb cap, 1”x4”x41” Fork, Cat I pins 160 467.00

2000 2000 lb cap, 1-1/4”x4”x41” Fork, Cat I pins 180 573.00

1500-A 1500 lb cap, adjustable tines, 1-¼”x4”x41” Fork, Cat I pins 300 827.00

3542 3500 lb cap, 1-⅜” x 4” x 42” ITA Class 2 Forks, 300 897.00

adjustable from 10" - 36" (center to center)

3548 3500 lb cap, 1-⅜” x 4” x 48” ITA Class 2 Forks, 315 921.00

adjustable from 10" - 36" (center to center)

Single Shank Ripper, Cat. 1, 2 position shank length 15"

or 19", hard faced point

Single Shank Ripper, Cat. 1, 23" shank length with

parking stand

Single Shank Ripper, Cat. 2, 27" shank length with

parking stand

Single Shank Middlebuster, Cat I Pins, Shear Bolt

protection, 2-position, 15" wing width & 12" cutting width

furrower



Jan 2020

SUNDOWN


Arena-Vator II with Roller (Quick Hitch Compatible) equipped with reversible points FOB JSW

AV2-6 6’ Arena-Vator w/15 S-tines, Cat I Pins 530 2,068.00

AV2-7 7’ Arena-Vator w/17 S-tines, Cat I Pins 640 2,370.00

AV2-8 8’ Arena-Vator w/19 S-tines, Cat I & 2 Pins 725 2,706.00

Arena-Vator III Standard (Quick Hitch Compatible) equipped with reversible points

FOB JSW

AV3-4 400 1,561.00

AV3-5 480 1,844.00

AV3-6 550 2,161.00

AV3-7 660 2,490.00

AV3-8 745 2,880.00

AV3-10 930 3,874.00

AV3-12 1120 4,492.00

AV3-4M 420 2,102.00

AV3-5M 500 2,334.00

AV3-6M 578 2,599.00

AV3-7M 690 2,882.00

AV3-8M 780 3,211.00

OptionsAV3-SH2 18 97.00

AV3-SH4 35 171.00

AV3-SH6 54 259.00

AV3-SH8 80 344.00

AV3-GW 45 328.00

AV3-WT 75 511.00

AV3-PH 67 289.00

AV3-4FR 4' Finger Rake and mount kit 84 533.00





6' Arena-Vator, 15 S-Tines, Cat. 1 with Pipe Roller &

Leveler


Leveler

8' Arena-Vator, 19 S-Tines, Cat. 1 & 2 with Pipe Roller &

Leveler

10' Arena-Vator, 23 S-Tines, Cat. 1 & 2 with Pipe

Roller & Leveler12' Arena-Vator, 27 S-Tines, Cat. 1 & 2 with Pipe Roller &

Leveler

Scarifier Shank Kit - incl 8 adj. 4 hole shanks for AV3-10

Scarifier Shank Kit - incl 2 adj. 4 hole shanks for AV3-4

Scarifier Shank Kit - incl 4 adj. 4 hole shanks for AV3-

5,6,7Scarifier Shank Kit - incl 6 adj. 4 hole shanks for AV3-8

4' Arena-Vator, 11 S-Tines, Cat. 1 with Mesh Roller &

Leveler


Leveler


Leveler


Leveler

8' Arena-Vator, 19 S-Tines, Cat. 1 & 2 with Mesh Roller &

Leveler


Leveler


Leveler

Gauge Wheels, front or mid mount capable. 480 C - 545

tire & wheel

Water Tank 60 ga with mounting bracket, approx. 500 lbs

filled

Pull-type Hitch, converts 3-pt hitch to pull type mount for

AV3-4, 5, & 6



Jan 2020

SUNDOWN


S-Tine Cultivators w/reversible points (Quick Hitch compatible) FOB JSW

ST4 Cultivator 4' with 7 HD S-tines and points, Cat. 1 220 763.00

ST5 Cultivator 5' with 9 HD S-tines and points, Cat. 1 245 820.00

ST6 Cultivator 6' with 11 HD S-tines and points, Cat. 1 280 1,009.00

ST7 Cultivator 7' with 13 HD S-tines and points, Cat. 1 315 1,114.00

ST8 Cultivator 8' with 15 HD S-tines and points, Cat. 1 & 2 360 1,264.00

ST10 Cultivator 10' with 13 HD S-tines and points, Cat. 1 & 2 440 1,535.00

Options for S-Tine Cultivators

200-GW Gauge Wheels 4.80 x 8 4-ply tires 542.00

SC3155 7" Sweeps priced per S-tine 7.00

Tire Track Rippers (Quick Hitch Compatible) FOB JSW

R2-55 320 1,410.00

R2-67 350 1,436.00

R2-72 360 1,458.00


Ripper, Cat 1 & 2, 67" wide beam, 2 shanks on

adjustable centers from 40" to 60"







Jan 2020

SUNDOWN


FOB JSW

3-IN-1 Soil Conditioners (Quick Hitch Compatible)

SC4 4' Soil Conditioner, 7 S-tines, (1) 4' crumbler, Cat I 475 1,864.00


SC5 ½ 5-½' Soil Conditioner, 10 S-tines, (1) 5-½' crumbler, Cat I 700 2,630.00




• Please specify 7" sweeps or reversible points when ordering

SC10 1300 5,234.00

SC12 1620 5,880.00

SC15 1900 7,115.00

• Please specify 7" sweeps or reversible points when ordering

RSCGW 545.00

SOIL CONDITIONER ASSEMBLY

DHSC-72 Soil Conditioner Assembly for 6' Disc Harrow 335 1,799.00



12' Soil Conditioner, 23 S-tines, (2) 6' crumbler, 1 pair

gauge wheels, Cat II





Soil Conditioner Gauge Wheels are a bolt-on design with

adjustable height - 18.5 x 8.5 tire & wheel



Jan 2020

SUNDOWN


FOB WA

SPIN WEEDERS (Quick-Hitch Compatible)Spin Weeder assembly and Frame required for complete machineKW-1800RH 137 2,165.00

KW-1800LH 137 2,165.00

KW-2400 350 1,605.00

KW-2401

370 1,885.00

KW-2402

380 2,165.00

KW-2403

385 3,105.00

OptionsKW-3D 85 610.00

KW-GW-L 43 312.00

KW-GW-R 43 312.00

Spin Weeder Assembly, RH

3 Blade Adj. Disc Cultivator, 18" working width with mount & clamp

Adjustable Gauge Wheel Assembly LH

Adjustable Gauge Wheel Assembly RH

Spin Weeder Assembly, LH

Mounting Frame 7 - 10', manual adjustment, 2" increments

Mounting Frame, single side hydraulic adjustment, 2" x 18" hydraulic

cylinder with hoses, one remote required, 3-point rear mount

Mounting Frame 7-10', dual side hydraulic adjustment, 2" x 8"

hydraulic cylinders with hoses, two remotes required, 3-point rear

Mounting Frame 7-10', dual side hydraulic adjustment, 2" x 8"

hydraulic cylinders with hoses, 12-volt electric selector valve, 3-point

rear mount



Jan 2020

SUNDOWN


FOB JSW

Weight Box

8239 Weight Box, Cat I – 32w x 16d x 22h - 500 lb capacity 101 388.00

8240 Weight Box, Cat I/II – 27w x 29d x 30h - 1000 lb capacity 168 588.00

8246 Weight Box, Cat I/II – 29w x 32d x 35h - 1500 lb capacity 220 737.00

Replacement Forged Bale Spike

840010 48” Spike w/nut – 2500 lb capacity 21 82.00

J840027 Sleeve – 57mm OD x 120mm 2.5 11.25

FORGED BALE SPIKE QUANTITY DISCOUNT

5% extra on a 5 Spike order

10% extra on a 10 Spike order

Sleeves ordered w/Spikes will also receive the quantity discount



Date post:	16-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

SUNDOWN Prices do not include dealer set up or …AE-04 Electric actuator for P-64-IV and P-72-IV...

Documents