Z-PR
IME
™PLU
S
Super Clinicians Deserve Superior Bonds!
Rx Only
ZZiirrccoonniiaa -- AAlluummiinnaa -- MMeettaall PPrriimmeerr
A NEW SUPERHEROFOR SUPERIOR BONDING
• Unparalleled bond strengths to Zirconia, Aluminaand Metal restorations
• Compatible with light-cured and dual-cured resin luting cements
• Convenient, single bottle delivery offers ease of dispensing
• Versatility and durability with many different substrates
• Significantly enhances bond strengths of other resincements*
* Data on file, BISCO, Inc.
BISCO’s Z-PRIME™ Plus is a
single-component priming
agent used to enhance
adhesion between indirect
restorative materials and
composite resin cements. It
can be used as a surface
treatment for Zirconia and
Alumina metal oxide ceramics, as well as other types of
metals/alloys, composites and endodontic posts. Z-PRIME
Plus has been specifically formulated to provide high
bond strengths in either self cure or light cure modes.
Z-PRIME Plus significantly enhances bondstrengths to Zirconia, Alumina and Metal substrates more than any other surface primeron the market!
25
30
23.0
16.0
13.0
6.0
9.0
2.0
11.0
7.0
Z-PRIME Plus &DUO-LINK™
AZ PRIMER & ResiCem
S
BS
(MP
a)
Clearafil CeramicPrimer &
Panavia F2.0
Monobond Plus & Multilink
20
15
10
5
0
Before and After Aging2hrs/37°C 72hrs/100°C
Average Shear Bond Strength of different Zirconia
Primers with their corresponding self cure (S/C)
resin cement systems.
Bond Strengths using Z-PRIME Plus
Bond Strengths without the use of
Z-PRIME Plus
30
25
20
15
10
5
0
Zirconia Alumina High Noble AlloyTitanium
SB
S (M
pa)
Z-PRIME Plus creates predictable bonds to a
multitude of indirect substrates.
Shear Bond Strength of Z-PRIME Plus with
resin cement (S/C) on Different Substrates
“Confidence inIndirect Adhesion”
SB
S (M
Pa)
SB
S (M
Pa)
TO ORDER CALL: 800-247-3368Order direct from your dedicated Account Specialist at BISCO!
www.bisco.comMC-2131ZP
ZZiirrccoonniiaa -- AAlluummiinnaa -- MMeettaall PPrriimmeerr
ORDERING INFORMATION
RELATED PRODUCT
TECHNIQUE FOR PLACEMENT
B-6001P
1 Bottle Z-PRIME Plus (4ml), Technique Card, Instructions/MSDS
Apply 1-2 coats of Z-PRIME Plus,uniformly wetting the internal surface. Dry with an air syringe for 3-5 seconds.
Clean the internal surface of therestoration; rinse and air dry.
Proceed with cementationusing a luting cement (e.g.DUO-LINK™).
DUO-LINK is a dual-cured luting cement with ultrafine filler
particles and is intended to be used with an adhesive system.
DUO-LINK and Z-PRIME Plus is a superior combination when
cementing Zirconia and Alumina metal oxide ceramics, as well as
other types of metal, composite and endodontic post restorations.
ORDERING INFORMATIONDUO-LINK DUAL-SYRINGE1 Dual-Syringe (Base/Catalyst, 8g mixed), 15 Mixing Tips andIntraoral Tips, Instructions/MSDS
A-19010P TRANSLUCENTA-19061P CLEAR
Composite Luting CementDUO-LINK™