Ultimate Corrosion Protection
Powder CoatingsRebar
Superior Protection.Stronger Reinforcement.
Superior Protection.Stronger Reinforcement.
Jotaguard RB
Scan QR code to find out more or visit jotun.com
AN IMPECCABLE RECORD The Jotaguard RB range of FBE coatings has
been used on many impressive structures
worldwide, including the Bandra Worli Sea
Link Bridge in Mumbai, King Abdul Aziz
Center for World Culture in the
Kingdom of Saudi Arabia, Doha
International Airport in Qatar and the
Federal Electricity & Water Authority
building in the UAE. With a track record
of over 40 years in harsh environments,
Jotaguard RB is a proven, cost-effective
solution for the corrosion protection of steel
reinforcing bars.
Jotaguard RB is tested to ASTM A775 and
is approved by Valley Forge Laboratories.
Fabrication and on-site handling of steel
reinforcing bars coated with Jotaguard RB is
covered by ASTM D3963 and ASTM A775.
By following the appropriate standards and
field handling techniques recommended by
Epoxy Interest Group (EIG), damage to the
bars is prevented, ensuring long-term
protection. In addition, when any areas and
bar ends incur damage they can be
repaired with a suitable epoxy patching
material, also available from Jotun.
ALSO FROMJOTUN
In addition to FBE coatings for steel reinforcing
bars, Jotun provides solutions for a wide range of
needs within the construction industry, including
architectural powder coatings for aluminium and
a range of systems for application on steel.
AN ECO-FRIENDLYSOLUTION
Every time you use Jotun products, you can rest
assured that you are working towards a greener,
more sustainable future. Being environmentally
friendly, our powder coatings do not contain
solvents, so no Volatile Organic Compounds
(VOCs) are released into the air. Oversprayed
powder can be recycled with minimal wastage,
and disposal is easy and safe. In addition, all
Jotun Powder Coatings’ products are lead-free.
ABOUT JOTUN Jotun is one of the world’s leading
manufacturers of decorative paints,
marine, protective and powder coatings.
The group has 74 companies and 39
production facilities on all continents. Jotun
products are available in 90 countries
through own subsidiaries, joint ventures,
agents, branch offices and distributors. At
Jotun Powder Coatings, we are committed
to develop, produce and deliver solutions
that create value through consistency in
application, enhanced appearance and
superior durability.
STAY IN TOUCH Please contact us for more information on
Jotaguard RB. We offer company training on our
product portfolio and powder coating technology
through a number of powder schools that we run
for our customers. Feel free to contact your local
sales representative for more information.
Ultimate Corrosion Protection
Powder CoatingsRebar
Superior Protection.Stronger Reinforcement.
Superior Protection.Stronger Reinforcement.
Jotaguard RB
Scan QR code to find out more or visit jotun.com
AN IMPECCABLE RECORD The Jotaguard RB range of FBE coatings has
been used on many impressive structures
worldwide, including the Bandra Worli Sea
Link Bridge in Mumbai, King Abdul Aziz
Center for World Culture in the
Kingdom of Saudi Arabia, Doha
International Airport in Qatar and the
Federal Electricity & Water Authority
building in the UAE. With a track record
of over 40 years in harsh environments,
Jotaguard RB is a proven, cost-effective
solution for the corrosion protection of steel
reinforcing bars.
Jotaguard RB is tested to ASTM A775 and
is approved by Valley Forge Laboratories.
Fabrication and on-site handling of steel
reinforcing bars coated with Jotaguard RB is
covered by ASTM D3963 and ASTM A775.
By following the appropriate standards and
field handling techniques recommended by
Epoxy Interest Group (EIG), damage to the
bars is prevented, ensuring long-term
protection. In addition, when any areas and
bar ends incur damage they can be
repaired with a suitable epoxy patching
material, also available from Jotun.
ALSO FROMJOTUN
In addition to FBE coatings for steel reinforcing
bars, Jotun provides solutions for a wide range of
needs within the construction industry, including
architectural powder coatings for aluminium and
a range of systems for application on steel.
AN ECO-FRIENDLYSOLUTION
Every time you use Jotun products, you can rest
assured that you are working towards a greener,
more sustainable future. Being environmentally
friendly, our powder coatings do not contain
solvents, so no Volatile Organic Compounds
(VOCs) are released into the air. Oversprayed
powder can be recycled with minimal wastage,
and disposal is easy and safe. In addition, all
Jotun Powder Coatings’ products are lead-free.
ABOUT JOTUN Jotun is one of the world’s leading
manufacturers of decorative paints,
marine, protective and powder coatings.
The group has 74 companies and 39
production facilities on all continents. Jotun
products are available in 90 countries
through own subsidiaries, joint ventures,
agents, branch offices and distributors. At
Jotun Powder Coatings, we are committed
to develop, produce and deliver solutions
that create value through consistency in
application, enhanced appearance and
superior durability.
STAY IN TOUCH Please contact us for more information on
Jotaguard RB. We offer company training on our
product portfolio and powder coating technology
through a number of powder schools that we run
for our customers. Feel free to contact your local
sales representative for more information.
Ultimate Corrosion Protection
Powder CoatingsRebar
Superior Protection.Stronger Reinforcement.
Superior Protection.Stronger Reinforcement.
Jotaguard RB
Scan QR code to find out more or visit jotun.com
AN IMPECCABLE RECORD The Jotaguard RB range of FBE coatings has
been used on many impressive structures
worldwide, including the Bandra Worli Sea
Link Bridge in Mumbai, King Abdul Aziz
Center for World Culture in the
Kingdom of Saudi Arabia, Doha
International Airport in Qatar and the
Federal Electricity & Water Authority
building in the UAE. With a track record
of over 40 years in harsh environments,
Jotaguard RB is a proven, cost-effective
solution for the corrosion protection of steel
reinforcing bars.
Jotaguard RB is tested to ASTM A775 and
is approved by Valley Forge Laboratories.
Fabrication and on-site handling of steel
reinforcing bars coated with Jotaguard RB is
covered by ASTM D3963 and ASTM A775.
By following the appropriate standards and
field handling techniques recommended by
Epoxy Interest Group (EIG), damage to the
bars is prevented, ensuring long-term
protection. In addition, when any areas and
bar ends incur damage they can be
repaired with a suitable epoxy patching
material, also available from Jotun.
ALSO FROMJOTUN
In addition to FBE coatings for steel reinforcing
bars, Jotun provides solutions for a wide range of
needs within the construction industry, including
architectural powder coatings for aluminium and
a range of systems for application on steel.
AN ECO-FRIENDLYSOLUTION
Every time you use Jotun products, you can rest
assured that you are working towards a greener,
more sustainable future. Being environmentally
friendly, our powder coatings do not contain
solvents, so no Volatile Organic Compounds
(VOCs) are released into the air. Oversprayed
powder can be recycled with minimal wastage,
and disposal is easy and safe. In addition, all
Jotun Powder Coatings’ products are lead-free.
ABOUT JOTUN Jotun is one of the world’s leading
manufacturers of decorative paints,
marine, protective and powder coatings.
The group has 74 companies and 39
production facilities on all continents. Jotun
products are available in 90 countries
through own subsidiaries, joint ventures,
agents, branch offices and distributors. At
Jotun Powder Coatings, we are committed
to develop, produce and deliver solutions
that create value through consistency in
application, enhanced appearance and
superior durability.
STAY IN TOUCH Please contact us for more information on
Jotaguard RB. We offer company training on our
product portfolio and powder coating technology
through a number of powder schools that we run
for our customers. Feel free to contact your local
sales representative for more information.
FOR BUILDINGSPEOPLE REMEMBER
At Jotun Powder Coatings, we are committed to creating value through superior durability, enhanced appearance and sustainability of our products. This is why Jotun is trusted to coat the world’s most outstanding projects.
From the iconic Burj Khalifa in the UAE to the prestigious Kuala Lumpur Convention Centre in Malaysia, spectacular Marina Bay Sands hotel in Singapore and the impressive Varyap Meridian complex in Turkey, Jotun’s quality shines through.
At Jotun, we understand that buildings and infrastructure require the best possible protection in order to withstand the test of time. Jotaguard RB is a Fusion-Bonded Epoxy (FBE) coating designed to protect steel from corrosion and reinforced concrete structures from damage that occurs over time. Our advanced technology provides ultimate protection while maintaining bond strength between steel and concrete, and delivers a cost-efficient solution for the long-term stability of the structure. Corrosion of steel reinforcing bar represents a great challenge, particularly in coastal environments and in cold climates where de-icing with salt is required. When the bars corrode, by-products of corrosion gather and occupy a greater volume than the original bar, placing pressure on concrete and ultimately resulting in cracks. This not only degrades aesthetic appearance and necessitates further repairs, but also impacts the structural integrity of the building.
SUPERIOR PROTECTION.STRONGER REINFORCEMENT.
COST-EFFICIENT SOLUTION By incorporating Jotaguard RB into initial specifications, you increase the longevity of the structure and avoid significant financial loss in the future. At the beginning of the building phase, life cycle costs are easy to ignore, however, they can cause substantial impact over time.
FBE coatings provide the lowest life cycle cost amongst alternative technologies, with only a minimal increase to initial project costs.
Initial Cost Life Cycle Cost
3 Time from cracking to repair is assumed 5 years for all systems
Uncoated reinforcing
Epoxy-coated reinforcing
Corrosion inhibitor2
& uncoated reinforcing
System
Time to corrosioninitiation
(Years)
Time from corrosion initiation to concrete cracking
(Years)
2.2
20
4 - 6
6.8
25
7
Time tofirst repair3
(Years)
14
50
16 - 18
Time to corrosion initiation, concrete cracking and first repair.
2 Based on averaged data for two widely used corrosion inhibitors referred to as RH and DCI in M. O'Reilly’s work
1 Life cycle costs calculated at 4% discount rate
Initial and life cycle costs over 75-year design life per unit area of bridge deck1
By coating the reinforcing steel with Jotaguard RB, you are protecting it against corrosion and ultimately increasing longevity of the structure.
Severely deteriorated concrete with uncoated and corroded reinforcing
bars after only a few years of construction.
Source: M. O’Reilly, “Performance of multiple corrosion protection systems for reinforced concrete bridge decks” University of Kansas, 2011
JPC
-BRC
-BU
C-2
250E
N-0
813
0
100
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
200
300
400
500
600
$226$234
$382
$232
$231
Co
st (
$/m
2 )
$531
$283
$382
$504
$463
0
100
200
300
400
500
600
Co
st (
$/m
2 )
FOR BUILDINGSPEOPLE REMEMBER
At Jotun Powder Coatings, we are committed to creating value through superior durability, enhanced appearance and sustainability of our products. This is why Jotun is trusted to coat the world’s most outstanding projects.
From the iconic Burj Khalifa in the UAE to the prestigious Kuala Lumpur Convention Centre in Malaysia, spectacular Marina Bay Sands hotel in Singapore and the impressive Varyap Meridian complex in Turkey, Jotun’s quality shines through.
At Jotun, we understand that buildings and infrastructure require the best possible protection in order to withstand the test of time. Jotaguard RB is a Fusion-Bonded Epoxy (FBE) coating designed to protect steel from corrosion and reinforced concrete structures from damage that occurs over time. Our advanced technology provides ultimate protection while maintaining bond strength between steel and concrete, and delivers a cost-efficient solution for the long-term stability of the structure. Corrosion of steel reinforcing bar represents a great challenge, particularly in coastal environments and in cold climates where de-icing with salt is required. When the bars corrode, by-products of corrosion gather and occupy a greater volume than the original bar, placing pressure on concrete and ultimately resulting in cracks. This not only degrades aesthetic appearance and necessitates further repairs, but also impacts the structural integrity of the building.
SUPERIOR PROTECTION.STRONGER REINFORCEMENT.
COST-EFFICIENT SOLUTION By incorporating Jotaguard RB into initial specifications, you increase the longevity of the structure and avoid significant financial loss in the future. At the beginning of the building phase, life cycle costs are easy to ignore, however, they can cause substantial impact over time.
FBE coatings provide the lowest life cycle cost amongst alternative technologies, with only a minimal increase to initial project costs.
Initial Cost Life Cycle Cost
3 Time from cracking to repair is assumed 5 years for all systems
Uncoated reinforcing
Epoxy-coated reinforcing
Corrosion inhibitor2
& uncoated reinforcing
System
Time to corrosioninitiation
(Years)
Time from corrosion initiation to concrete cracking
(Years)
2.2
20
4 - 6
6.8
25
7
Time tofirst repair3
(Years)
14
50
16 - 18
Time to corrosion initiation, concrete cracking and first repair.
2 Based on averaged data for two widely used corrosion inhibitors referred to as RH and DCI in M. O'Reilly’s work
1 Life cycle costs calculated at 4% discount rate
Initial and life cycle costs over 75-year design life per unit area of bridge deck1
By coating the reinforcing steel with Jotaguard RB, you are protecting it against corrosion and ultimately increasing longevity of the structure.
Severely deteriorated concrete with uncoated and corroded reinforcing
bars after only a few years of construction.
Source: M. O’Reilly, “Performance of multiple corrosion protection systems for reinforced concrete bridge decks” University of Kansas, 2011
JPC
-BRC
-BU
C-2
250E
N-0
813
0
100
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
200
300
400
500
600
$226$234
$382
$232
$231
Co
st (
$/m
2 )
$531
$283
$382
$504
$463
0
100
200
300
400
500
600
Co
st (
$/m
2 )
FOR BUILDINGSPEOPLE REMEMBER
At Jotun Powder Coatings, we are committed to creating value through superior durability, enhanced appearance and sustainability of our products. This is why Jotun is trusted to coat the world’s most outstanding projects.
From the iconic Burj Khalifa in the UAE to the prestigious Kuala Lumpur Convention Centre in Malaysia, spectacular Marina Bay Sands hotel in Singapore and the impressive Varyap Meridian complex in Turkey, Jotun’s quality shines through.
At Jotun, we understand that buildings and infrastructure require the best possible protection in order to withstand the test of time. Jotaguard RB is a Fusion-Bonded Epoxy (FBE) coating designed to protect steel from corrosion and reinforced concrete structures from damage that occurs over time. Our advanced technology provides ultimate protection while maintaining bond strength between steel and concrete, and delivers a cost-efficient solution for the long-term stability of the structure. Corrosion of steel reinforcing bar represents a great challenge, particularly in coastal environments and in cold climates where de-icing with salt is required. When the bars corrode, by-products of corrosion gather and occupy a greater volume than the original bar, placing pressure on concrete and ultimately resulting in cracks. This not only degrades aesthetic appearance and necessitates further repairs, but also impacts the structural integrity of the building.
SUPERIOR PROTECTION.STRONGER REINFORCEMENT.
COST-EFFICIENT SOLUTION By incorporating Jotaguard RB into initial specifications, you increase the longevity of the structure and avoid significant financial loss in the future. At the beginning of the building phase, life cycle costs are easy to ignore, however, they can cause substantial impact over time.
FBE coatings provide the lowest life cycle cost amongst alternative technologies, with only a minimal increase to initial project costs.
Initial Cost Life Cycle Cost
3 Time from cracking to repair is assumed 5 years for all systems
Uncoated reinforcing
Epoxy-coated reinforcing
Corrosion inhibitor2
& uncoated reinforcing
System
Time to corrosioninitiation
(Years)
Time from corrosion initiation to concrete cracking
(Years)
2.2
20
4 - 6
6.8
25
7
Time tofirst repair3
(Years)
14
50
16 - 18
Time to corrosion initiation, concrete cracking and first repair.
2 Based on averaged data for two widely used corrosion inhibitors referred to as RH and DCI in M. O'Reilly’s work
1 Life cycle costs calculated at 4% discount rate
Initial and life cycle costs over 75-year design life per unit area of bridge deck1
By coating the reinforcing steel with Jotaguard RB, you are protecting it against corrosion and ultimately increasing longevity of the structure.
Severely deteriorated concrete with uncoated and corroded reinforcing
bars after only a few years of construction.
Source: M. O’Reilly, “Performance of multiple corrosion protection systems for reinforced concrete bridge decks” University of Kansas, 2011
JPC
-BRC
-BU
C-2
250E
N-0
813
0
100
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
200
300
400
500
600
$226$234
$382
$232
$231
Co
st (
$/m
2 )
$531
$283
$382
$504
$463
0
100
200
300
400
500
600
Co
st (
$/m
2 )
FOR BUILDINGSPEOPLE REMEMBER
At Jotun Powder Coatings, we are committed to creating value through superior durability, enhanced appearance and sustainability of our products. This is why Jotun is trusted to coat the world’s most outstanding projects.
From the iconic Burj Khalifa in the UAE to the prestigious Kuala Lumpur Convention Centre in Malaysia, spectacular Marina Bay Sands hotel in Singapore and the impressive Varyap Meridian complex in Turkey, Jotun’s quality shines through.
At Jotun, we understand that buildings and infrastructure require the best possible protection in order to withstand the test of time. Jotaguard RB is a Fusion-Bonded Epoxy (FBE) coating designed to protect steel from corrosion and reinforced concrete structures from damage that occurs over time. Our advanced technology provides ultimate protection while maintaining bond strength between steel and concrete, and delivers a cost-efficient solution for the long-term stability of the structure. Corrosion of steel reinforcing bar represents a great challenge, particularly in coastal environments and in cold climates where de-icing with salt is required. When the bars corrode, by-products of corrosion gather and occupy a greater volume than the original bar, placing pressure on concrete and ultimately resulting in cracks. This not only degrades aesthetic appearance and necessitates further repairs, but also impacts the structural integrity of the building.
SUPERIOR PROTECTION.STRONGER REINFORCEMENT.
COST-EFFICIENT SOLUTION By incorporating Jotaguard RB into initial specifications, you increase the longevity of the structure and avoid significant financial loss in the future. At the beginning of the building phase, life cycle costs are easy to ignore, however, they can cause substantial impact over time.
FBE coatings provide the lowest life cycle cost amongst alternative technologies, with only a minimal increase to initial project costs.
Initial Cost Life Cycle Cost
3 Time from cracking to repair is assumed 5 years for all systems
Uncoated reinforcing
Epoxy-coated reinforcing
Corrosion inhibitor2
& uncoated reinforcing
System
Time to corrosioninitiation
(Years)
Time from corrosion initiation to concrete cracking
(Years)
2.2
20
4 - 6
6.8
25
7
Time tofirst repair3
(Years)
14
50
16 - 18
Time to corrosion initiation, concrete cracking and first repair.
2 Based on averaged data for two widely used corrosion inhibitors referred to as RH and DCI in M. O'Reilly’s work
1 Life cycle costs calculated at 4% discount rate
Initial and life cycle costs over 75-year design life per unit area of bridge deck1
By coating the reinforcing steel with Jotaguard RB, you are protecting it against corrosion and ultimately increasing longevity of the structure.
Severely deteriorated concrete with uncoated and corroded reinforcing
bars after only a few years of construction.
Source: M. O’Reilly, “Performance of multiple corrosion protection systems for reinforced concrete bridge decks” University of Kansas, 2011
JPC
-BRC
-BU
C-2
250E
N-0
813
0
100
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
Uncoa
ted
reinf
orcin
g
Epox
y-coa
ted
reinf
orcin
g
Stain
less s
teel
reinf
orcin
g
Corro
sion
inhibi
tor2
& unc
oate
d re
infor
cing
200
300
400
500
600
$226$234
$382
$232
$231
Co
st (
$/m
2 )
$531
$283
$382
$504
$463
0
100
200
300
400
500
600
Co
st (
$/m
2 )
Ultimate Corrosion Protection
Powder CoatingsRebar
Superior Protection.Stronger Reinforcement.
Superior Protection.Stronger Reinforcement.
JotaguardRB
Scan QR code to find out more or visit jotun.com
AN IMPECCABLE RECORDThe Jotaguard RB range of FBE coatings has
been used on many impressive structures
worldwide, including the Bandra Worli Sea
Link Bridge in Mumbai, King Abdul Aziz
Center for World Culture in the
Kingdom of Saudi Arabia, Doha
International Airport in Qatar and the
Federal Electricity & Water Authority
building in the UAE. With a track record
of over 40 years in harsh environments,
Jotaguard RB is a proven, cost-effective
solution for the corrosion protection of steel
reinforcing bars.
Jotaguard RB is tested to ASTM A775 and
is approved by Valley Forge Laboratories.
Fabrication and on-site handling of steel
reinforcing bars coated with Jotaguard RB is
covered by ASTM D3963 and ASTM A775.
By following the appropriate standards and
field handling techniques recommended by
Epoxy Interest Group (EIG), damage to the
bars is prevented, ensuring long-term
protection. In addition, when any areas and
bar ends incur damage they can be
repaired with a suitable epoxy patching
material, also available from Jotun.
ALSO FROMJOTUN
In addition to FBE coatings for steel reinforcing
bars, Jotun provides solutions for a wide range of
needs within the construction industry, including
architectural powder coatings for aluminium and
a range of systems for application on steel.
AN ECO-FRIENDLYSOLUTION
Every time you use Jotun products, you can rest
assured that you are working towards a greener,
more sustainable future. Being environmentally
friendly, our powder coatings do not contain
solvents, so no Volatile Organic Compounds
(VOCs) are released into the air. Oversprayed
powder can be recycled with minimal wastage,
and disposal is easy and safe. In addition, all
Jotun Powder Coatings’ products are lead-free.
ABOUT JOTUNJotun is one of the world’s leading
manufacturers of decorative paints,
marine, protective and powder coatings.
The group has 74 companies and 39
production facilities on all continents. Jotun
products are available in 90 countries
through own subsidiaries, joint ventures,
agents, branch offices and distributors. At
Jotun Powder Coatings, we are committed
to develop, produce and deliver solutions
that create value through consistency in
application, enhanced appearance and
superior durability.
STAY IN TOUCHPlease contact us for more information on
Jotaguard RB. We offer company training on our
product portfolio and powder coating technology
through a number of powder schools that we run
for our customers. Feel free to contact your local
sales representative for more information.
Ultimate Corrosion Protection
Powder CoatingsRebar
Superior Protection.Stronger Reinforcement.
Superior Protection.Stronger Reinforcement.
Jotaguard RB
Scan QR code to find out more or visit jotun.com
AN IMPECCABLE RECORD The Jotaguard RB range of FBE coatings has
been used on many impressive structures
worldwide, including the Bandra Worli Sea
Link Bridge in Mumbai, King Abdul Aziz
Center for World Culture in the
Kingdom of Saudi Arabia, Doha
International Airport in Qatar and the
Federal Electricity & Water Authority
building in the UAE. With a track record
of over 40 years in harsh environments,
Jotaguard RB is a proven, cost-effective
solution for the corrosion protection of steel
reinforcing bars.
Jotaguard RB is tested to ASTM A775 and
is approved by Valley Forge Laboratories.
Fabrication and on-site handling of steel
reinforcing bars coated with Jotaguard RB is
covered by ASTM D3963 and ASTM A775.
By following the appropriate standards and
field handling techniques recommended by
Epoxy Interest Group (EIG), damage to the
bars is prevented, ensuring long-term
protection. In addition, when any areas and
bar ends incur damage they can be
repaired with a suitable epoxy patching
material, also available from Jotun.
ALSO FROMJOTUN
In addition to FBE coatings for steel reinforcing
bars, Jotun provides solutions for a wide range of
needs within the construction industry, including
architectural powder coatings for aluminium and
a range of systems for application on steel.
AN ECO-FRIENDLYSOLUTION
Every time you use Jotun products, you can rest
assured that you are working towards a greener,
more sustainable future. Being environmentally
friendly, our powder coatings do not contain
solvents, so no Volatile Organic Compounds
(VOCs) are released into the air. Oversprayed
powder can be recycled with minimal wastage,
and disposal is easy and safe. In addition, all
Jotun Powder Coatings’ products are lead-free.
ABOUT JOTUN Jotun is one of the world’s leading
manufacturers of decorative paints,
marine, protective and powder coatings.
The group has 74 companies and 39
production facilities on all continents. Jotun
products are available in 90 countries
through own subsidiaries, joint ventures,
agents, branch offices and distributors. At
Jotun Powder Coatings, we are committed
to develop, produce and deliver solutions
that create value through consistency in
application, enhanced appearance and
superior durability.
STAY IN TOUCH Please contact us for more information on
Jotaguard RB. We offer company training on our
product portfolio and powder coating technology
through a number of powder schools that we run
for our customers. Feel free to contact your local
sales representative for more information.
PERFORMANCE
BOND STRENGTH
Product Name
Jotaguard RB 4001
Jotaguard RB 4003
The bond strength between steel and concrete is maintained when the reinforcing bars are coated with Jotaguard RB, as proven by independent third-party testing houses. A test of three uncoated and three coated steel reinforcing bars was conducted by Valley Forge Laboratories with the result that the bond strength between concrete and reinforcing bars coated with Jotaguard RB 4003 was identical to that of uncoated bars.
Make your concrete structure strong and long-lasting by coating steel reinforcing bars with Jotaguard RB.This cost-effective solution provides corrosion protection and helps increase the life cycle of the concrete structure.
Jotaguard RB is tested to ASTM A775 standard and approved by Valley Forge Laboratories.
Source: Beam-end test, ASTM A944 for comparing bond strength of steel reinforcing bars to concrete using beam-end specimens with concrete beam
dimensions of 610mm*225mm*450mm. Valley Forge Laboratories Inc., Devon, Pennsylvania 14.02.2000
Relative bond strength between concrete and steel was further verified by an independent engineering company Fugro-Suhaimi in 2013. They conducted pull-out tests and found that the mean relative bond strength of coated and uncoated steel reinforcing bars is similar. Fugro-Suhaimi concluded that reinforcing bar coated with Jotaguard RB 4003 satisfies the specification of the relative bond strength as per ASTM A775-97 requirements.
Sample
Three bar beam end assemblies coated with Jotaguard RB 4003
Three uncoated bar beam end assemblies
Relative bond strength performance index
10, 741 kg force
10, 954 kg force
Feature
Compliant with ASTM A775 with increased flexibility
Compliant with ASTM A775
Testing
ASTM A775 –bar No.6, 180˚,4’’ diameter Mandrel, 15 seconds
ASTM A775 –bar No.6, 180˚,6’’ diameter Mandrel, 15 seconds
JPC
-INS-
BUC
-226
2EN
-081
3