Document ID: 48094
Supplementary instructions
Welded sockets and adaptersVEGAPULS 64, VEGAFLEX 80 series
VEGABAR series 80
VEGACAP, VEGACAL, VEGAWAVE
VEGASWING, VEGAVIB, VEGAKON
2
Contents
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Contents1 Product description ................................................................................................................. 3
2 Welded socket - universal ....................................................................................................... 42.1 Threadedfittings .............................................................................................................. 42.2 Clamp ............................................................................................................................... 72.3 Slotted nut acc. to DIN 11851 ........................................................................................... 82.4 Slotted nut acc. to DIN 11864-1 ........................................................................................ 92.5 Furtherhygienicfittings .................................................................................................. 10
3 Welded socket - VEGABAR series 80 ................................................................................... 133.1 Threadedfittings ............................................................................................................ 133.2 Extensionfitting-Paperindustry .................................................................................... 16
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON .......................................................... 194.1 VEGASWING 61, 63 ...................................................................................................... 194.2 VEGAVIB 61, 63 ............................................................................................................. 204.3 VEGAKON 61 ................................................................................................................. 21
5 Threadedadaptersandflanges-VEGAPULS64 ................................................................ 235.1 Adapter .......................................................................................................................... 235.2 FlangesaccordingtoEN1092-1 .................................................................................... 245.3 FlangesaccordingtoASMEB16.5................................................................................. 25
6 Threadedadapter-VEGAPULS64,VEGAFLEX80series ................................................. 266.1 ClampaccordingtoDIN32676,ISO2852 ..................................................................... 266.2 Slotted nut acc. to DIN 11851 ......................................................................................... 286.3 Slotted nut acc. to DIN 11864-1 ...................................................................................... 306.4 Furtherhygienicfittings .................................................................................................. 33
7 Threaded adapter - VEGABAR 80 series ............................................................................. 357.1 ClampaccordingtoDIN32676,ISO2852 ..................................................................... 357.2 Varivent .......................................................................................................................... 36
8 Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE ...................................................... 388.1 VEGACAP 63, 64, VEGACAL 63, 64 .............................................................................. 388.2 VEGAWAVE 61, 63......................................................................................................... 41
9 Welding,mounting ................................................................................................................. 459.1 Weldinginstructions ....................................................................................................... 459.2 Mountinginstructionsthreadedandhygienicadapter .................................................... 46
Editingstatus:2020-12-02
3
1 Product description
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
1 Product descriptionWelded sockets are used for connection of sensors to the process.
1 2 3
Fig. 1: Function of a welded socket1 Vessel2 Welded socket3 Sensor
Threaded adapters are used to adapt sensors with threaded connec-tiontoexistingweldedsockets.
1 2 3 4
Fig. 2: Function, threaded adapter1 Vessel2 Welded socket3 Adapter4 Sensor
A process seal is required to use the welded sockets or threaded adapters.Dependingontheversion,theprocesssealisincludedasan optional component in the scope of delivery of the welded socket or the sensor.
Theweldingsockets,threadedandhygienicadaptersdescribedherearenotsubjecttotheEUPressureEquipmentDirectiveiftheyareoperatedatprocesspressures≤200bar.
Welded socket
Adapter
Process seal
Pressure device directive
4
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
2 Welded socket - universal
2.1 Threadedfittings
Feature Characteristic
Size G½
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. 2.36839
Seal Sensor side
2,5�
mm
(0.1
")16
,5�m
m(0
.65"
)
G1/2
ø 32 mm(1.26")
ø 28 mm(1.1")
Fig. 3: Dimensions of welded socket, thread G½ (DIN 3852-X)
Feature Characteristic
Size G¾
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. 2.36840
Seal Sensor side
2,5�
mm
(0.1
")16
,5�m
m(0
.65"
)
ø 38 mm(1.5")
ø 33 mm(1.3")G3/4
Fig. 4: Dimensions of welded socket, thread G¾ (DIN 3852-X)
Feature Characteristic
Size G1
Thread G½
Thread G¾
Thread G1
5
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Feature Characteristic
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. WDSB80.GLXXXX
Seal Sensor side
2,5�
mm
(0.1
")20
,5�m
m(0
.81"
)
ø 41 mm(1.61")
ø 47 mm(1.85")
G1
Fig. 5: Dimensions of welded socket, thread G1 (DIN 3852-X)
Feature Characteristic
Size G1½
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. 2.36842
Seal Sensor side
2,5
mm
(0.1
")24
,5 m
m(0
.97"
)
ø 56 mm(2.21")
ø 65 mm(2.56")
G1 1/2
Fig. 6: Dimensions of welded socket, thread G1½ (DIN 3852-X)
Part Feature Characteristic
Welded socket
Size G¾
Standard ISO 228-1
Material 316L
Product code/Art. no. ESMD.A1X
Thread G1½
ThreadG¾-Hygienicdesign
6
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Part Feature Characteristic
Seal Material FKM,EPDM
Configuration Sealringacc.toDIN3869
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9")
ø 40 mm (1.58")
G3/4
Fig. 7: Dimensions of welded socket, thread G¾ (ISO 228-1) - Hygienic design
Part Feature Characteristic
Welded socket
Size G1½
Standard ISO 228-1
Material 316L
Product code/Art. no. ESMD.B1X
Seal Material FKM,EPDM,FFKM
Configuration Sealringacc.toDIN3869
Size 42 x 3 mm
Weldingdummy
Material Brass
Blindplug Material 316L
30 m
m(1
.18"
)
ø 65 mm(2.56")
G1 1/2
Fig. 8: Dimensions of welded socket, thread G1½ (ISO 228-1) - Hygienic design
ThreadG1½-Hygienicdesign
7
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
2.2 Clamp
Component Feature Characteristic
Welded socket
Size 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. ESTC.B3SX
Tensionring Pressurestage PN 16, PN 40
Material 316L
Seal Material EPDM,FKM
Configuration Sealring
21,5
mm
(0.8
5")
ø 34,8 mm(1.37")
ø 38,1 mm(1.50")
ø 50,5 mm(1.99")
Fig. 9: Dimensions of welded socket, Clamp 1½" (DIN 32676, ISO 2852) PN 16
Component Feature Characteristic
Welded socket
Size 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. ESTC.C3SX
Tensionring Pressurestage PN 16, PN 40
Material 316L
Seal Material EPDM,FKM
Configuration Sealring
Clamp1½"
Clamp2"
8
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
21,5
mm
(0.8
5")
ø 47,5 mm(1.87")
ø 50,8 mm(2.00")
ø 64 mm(2.52")
Fig. 10: Dimensions of welded socket, Clamp 2" (DIN 32676, ISO 2852) PN 16
2.3 Slotted nut acc. to DIN 11851
Component Feature Characteristic
Welded socket
Size DN 40
Standard DIN 11851
Pressurestage PN 40
Material 316L
Product code/Art. no. ESTR.FA3X
Seal Material FKM,EPDM,NBR
Configuration Sealring
33 m
m(1
.3")
ø 43 mm(1.69")
ø 38 mm(1.5")
Rd 65 x 1/6
Fig. 11: Dimensions of welded socket, slotted nut DN 40 (DIN 11851)
Component Feature Characteristic
Welded socket
Size DN 50
Slotted nut DN 40
Slotted nut DN 50
9
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Component Feature Characteristic
Standard DIN 11851
Pressurestage PN 25
Material 316L
Product code/Art. no. ESTR.GA3X
Seal Material FKM,EPDM,NBR
Configuration Sealring
Rd 78 x 1/6
35 m
m(1
.38"
)
ø 50 mm(1.97")
ø 55 mm(2.17")
Fig. 12: Dimensions of welded socket, slotted nut DN 50 (DIN 11851)
2.4 Slottednutacc.toDIN11864-1
Component Feature Characteristic
Welded socket
Size DN 40
Standard DIN 11864-1
Pressurestage PN 25
Material 316L
Product code/Art. no. ESTR.FBXX
Seal From the user side
ø 38mm(1.50")
31m
m(1
.22"
)
ø 41mm(1.61")
Rd 65 x 1/6
Fig. 13: Dimensions of welded socket, slotted nut DN 40 (DIN 11864-1)
Slotted nut DN 40
10
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Component Feature Characteristic
Welded socket
Size DN 50
Standard DIN 11864-1
Pressurestage PN 16
Material 316L
Product code/Art. no. ESTR.GBXX
Seal From the user side
ø 50 mm(1.97")
35 m
m(1
.38"
)
ø 53 mm(2.09")
Rd 78 x 1/6
Fig. 14: Dimensions of welded socket, slotted nut DN 50 (DIN 11864-1)
2.5 Furtherhygienicfittings
Component Feature Characteristic
Welded socket
Size Rd 65 x 1/6
Standard -
Pressurestage PN 25
Material 316L
Product code/Art. no. ESTA.LA3XXX
Seal Material EPDM
Configuration O-ring
Size 40 x 5 mm
Weldingdummy
Material Brass
Blindplug Material 316L
Slotted nut DN 50
HygienicconnectionF40withcompressionnut
11
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
40 m
m(1
.58"
)
ø 79,6 mm(3.13")
Rd 65 x 1/6
Fig. 15: Dimensions of welded socket, hygienic fitting F40 with compression nut
Component Feature Characteristic
Welded socket
Size ø 90
Standard -
Pressurestage PN 25
Material 316L
Product code/Art. no. ESTA.LBXXX
Seal Material EPDM
Configuration O-ring
Size 40 x 5 mm
Weldingdummy
Material Brass
Blindplug Material 316L
40 m
m(1
.58"
)
ø 79,6 mm(3.13")
ø 72 mm(2.84")
ø 90 mm(1.54")
M6
Fig. 16: Dimensions of welded socket, hygienic fitting DN 32 with tension flange
Component Feature Characteristic
Welded socket
Size ø 105
HygienicfittingDN32withtensionflange
DRD connection
12
2 Welded socket - universal
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Component Feature Characteristic
Standard -
Pressurestage PN 40
Material 316L
Product code/Art. no. ESTD.AAXX
Seal Material PTFE
Configuration Flat seal
Size 50 x 66 x 1 mm20
mm
(0.7
9")
ø 84 mm (3.31")
ø 66 mm (2.6")
ø 105 mm (4.13")
M10
ø 125 mm (4.92")
ø 50 mm (1.97")
Fig. 17: Dimensions of welded socket, DRD
Component Feature Characteristic
Welded socket
Size DN 25
Standard -
Pressurestage -
Material 316Ti
Product code/Art. no. ESTK.KAXX
Seal Material EPDM
Configuration O-ring
Size 30 x 3 mm
Rd 52 x 1/6
25 m
m(0
.98"
)
ø 75 mm(2.95")
Fig. 18: Dimensions of welded socket, conus connection DN 25
Cone connection DN 25/Rd52 x 2
13
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
3 Welded socket - VEGABAR series 80
3.1 Threadedfittings
Part Feature Characteristic
Welded socket
Size G½
Standard EN 837
Material 316L
Product code/Art. no. WDSB80.DUXXXX
Seal Material KlingersilC-4400
Configuration Flat seal
Size 21 x 30 x 2 mm
Weldingdummy
Material Brass
Blindplug Material 316L
34 m
m(1
.34"
)
G 1/2
ø 30 mm (1.18")
Fig. 19: Dimensions of welded socket, thread G½ (EN 837) - manometer con-nection - VEGABAR 81, 82, 83
Part Feature Characteristic
Welded socket
Size G½
Standard ISO 228-1
Material 316L
Product code/Art. no. WDSB80.C3XXXX
Seal Material FKM
Configuration Sealringacc.toDIN3869
Size 18.5 x 23.9 x 1.5 mm
Weldingdummy
Material Brass
Blindplug Material 316L
ThreadG½-manometerconnection
ThreadG½-front-flush
14
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
G1/2
ø 18,5mm(0.73")
21m
m(0
.83"
)
10,5
mm
(0.4
1")
ø 30mm(1.18")
Fig. 20: Dimensions welded socket G½ (ISO 228-1), front-flush - VEGABAR 82
Part Feature Characteristic
Welded socket
Size G¾
Standard DIN 3852-E
Material 316L
Product code/Art. no. WDSB80.N9XXXX
Seal Material FKM,EPDM,FFKM,KlingersilC-4400
Configuration Sealringacc.toDIN3869
Size 23.47 x 2.62 mm
Weldingdummy
Material Brass
Blindplug Material 316L
22,5
mm
(0.8
9")
ø 40 mm (1.58")
G3/4
Fig. 21: Dimensions of welded socket, G¾ (DIN 3852-X) - VEGABAR 82
Part Feature Characteristic
Welded socket
Size G1
Standard ISO 228-1
Material 316L
Product code/Art. no. WDSB80.C5XXXX
Seal Material KlingersilC-4400
Configuration Flat seal
Size 33 x 39 x 2 mm
Thread G¾
Thread G1
15
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Weldingdummy
Material Brass
Blindplug Material 316L
21 m
m(0
.83"
)
ø 50 mm (1.97")
G 1
ø 30 mm (1.18")
Fig. 22: Dimensions of welded socket, G1 (ISO 228-1) - VEGABAR 82, 83
Part Feature Characteristic
Welded socket
Size G1½
Standard DIN 3852-A
Material 316L
Product code/Art. no. WDSB80.DAXXXX
Seal Material KlingersilC-4400
Configuration Flat seal
Size 48 x 55 x 2 mm
Weldingdummy
Material Brass
Blindplug Material 316L
2,5
mm
(0.1
")24
,5 m
m(0
.97"
)
ø 56 mm(2.21")
ø 65 mm(2.56")
G1 1/2
Fig. 23: Dimensions of welded socket, thread G1½ (EN 837) - VEGABAR 82, 83, 86, 87
Thread G1½
16
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
3.2 Extensionfitting-Paperindustry
Part Feature Characteristic
Welded socket
Size M30x1.5
Standard DIN 13
Material 316L
Product code/Art. no. WDSB80.ALXXXX (completely front-flush)WDSB80.APXXXX(forheadbox)
Seal Material FKM,EPDM,FFKM
Configuration Sealring
Size 20.35 x 1.78 mm
Weldingdummy
Material Brass
Blindplug Material 316L
M30x1,5
15m
m(0
.59"
)
23m
m(0
.91"
)ø 40mm(1.58")
ø 25mm(0.98")
Fig. 24: Dimensions of welded socket, M30 x 1.5 - VEGABAR 82
Part Feature Characteristic
Welded socket
Size M44x1.25
Standard DIN 13
Material,processfitting 316L, Alloy C22
Material,pressurescrew Aluminium, 316L
Product code/Art. no. WDSB80.AFXXXX
Seal Material FKM,EPDM,FFKM
Configuration Sealring
Size 40 x 2 mm
Weldingdummy
Material Brass
Blindplug Material 316L
M30 x 1.5
M44 x 1.25
17
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
21m
m(0
.83"
)
ø 60mm(2.36")
M44x1,25
Fig. 25: Dimensions of welded socket, M44 x 1.25 - VEGABAR 82, 83
Data-Versionwithmetallicseal:Part Feature Characteristic
Welded socket
Size G1
Standard ISO 228-1
Material 316L
Product code/Art. no. WDSB80.XXXXXX
Weldingdummy
Material Brass
Blindplug Material 316L
Additionaldata-VersionwithO-ringseal:Part Feature Characteristic
Seal Material FKM,EPDM,FFKM
Configuration Sealring
Size 18.77 x 1.78 mm
ø 45 mm(1.77")
G1
70
mm
(2
.76"
) 38,
5 m
m
(1.5
2")
Fig. 26: Dimensions welded socket G1 suitable for PASVE (for the two previ-ously listed versions) - VEGABAR 82
G1 suitable for PASVE
18
3 Welded socket - VEGABAR series 80
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Part Feature Characteristic
Welded socket
Size 1"
Standard -
Material 316L
Product code/Art. no. WDSB80.EMW1XX
Seal Material FKM,EPDM,FFKM,PTFE
Size ø 20.22 x 3.53 mm
Weldingdummy
Material Brass
25 m
m(0
.98"
)
ø 8
mm
(0.3
2")
17,6
mm
(0.6
9")
33,4 mm (1.32")
26,7 mm (1.05")
Fig. 27: Dimensions of welded socket, PMC 1" VEGABAR 82
PMC1"
19
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON
4.1 VEGASWING61,63
Part Feature Characteristic
Welded socket
Size G¾
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. ESTSG.1GBXX
Seal Material FKM,EPDM,FFKM
Configuration O-ring
Size 21 x 3 mm
26�m
m (1
.02"
)
ø 53 mm(2.09")
ø 32 mm(1.26")G 3/4
Fig. 28: Dimensions of welded socket, G¾ (DIN 3852-X)
Part Feature Characteristic
Welded socket
Size G1
Standard DIN 3852-X
Pressurestage PN 60
Material 316L
Product code/Art. no. ESTSG.1GAXX
Seal Material FKM,EPDM
Configuration O-ring
Size 21 x 3 mm
Thread G¾
Thread G1
20
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
29 m
m(1
.14"
)
G 1
ø 60 mm (2.36")
ø 39 mm (1.54 ")
Fig. 29: Dimensions of welded socket, G1 (DIN 3852-X)
4.2 VEGAVIB61,63
Part Feature Characteristic
Welded socket
Size G1
Standard DIN 3852-A
Pressurestage PN 16
Material 316L
Product code/Art. no. ESTVB.GCRXX
Seal Material EPDM70ShoreA,FDAapproved
Configuration O-ring
Size 28 x 3.5 mm36
mm
(1.4
2")
G 1
ø 60 mm (2.36")
ø 39 mm (1.54 ")
Fig. 30: Dimensions of welded socket, G1 (DIN 3852-A)
Thread G1
21
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Welded socket
Size G1½
Standard DIN 3852-A
Pressurestage PN 16
Material 316L
Product code/Art. no. ESTVB.GDUXX
Seal Material EPDM70ShoreA,FDAapproved
Configuration O-ring
Size 28 x 3.5 mm
43 m
m(1
.69"
)
G 1 1/2
ø 80 mm (3.15")
ø 59 mm (2.33 ")
Fig. 31: Dimensions of welded socket, G1½ (DIN 3852-A)
4.3 VEGAKON61
Feature Characteristic
Size G1
Standard DIN 3852-X
Pressurestage PN 25
Material 316Ti
Product code/Art. no. ESTKN.1GA
Seal KlingersilC-440033 x 39 x 2 mm
Thread G1½
Thread G1
22
4 Welded socket - VEGASWING, VEGAVIB, VEGAKON
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
21 m
m(0
.83"
)
ø 47 mm (1.85")
G 1
ø 40 mm (1.58")
Fig. 32: Dimensions of welded socket, G1 (DIN 3852-X)
Feature Characteristic
Size G1
Standard DIN 3852-X
Pressurestage PN 25
Material 316Ti
Product code/Art. no. ESTKN.1GL
Seal EPDM70ShoreA,FDAapproved28 x 3.5 mm
30,5
mm
(1.2
0")
ø 60 mm (2.36")
G 1
ø 30 mm (1.18")
ø 39 mm (1.54")
Fig. 33: Dimensions of welded socket, G1 (DIN 3852-X) - suitable for foodstuffs
Thread G1 - suitable for foodstuffs
23
5Threadedadaptersandflanges-VEGAPULS64
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
5 Threadedadaptersandflanges-VEGAPULS64
5.1 Adapter
Part Feature Characteristic
Adapter Size, sensor side G1½
Size, process side G1½
Standard DIN 3852-X
Material PTFE
Pressurestage unpressurized0.2bar
Process temperature -40…+130°C(-40…+266°F)
Max.torque 5Nm(3.688lbfft)
Product code/Art. no. GEWADA-F.TC4T1
Seal, sensor side
Material FKM
Configuration O-ringseal
Size 48 x 2 mm
Seal, pro-cess side
Material FKM
Configuration Flat seal
Size ø 58 x 47 x 2 mm
Fig. 34: Dimensions of threaded adapter G1½ (DIN 3852-X) on thread G1½, G2 (DIN 3852-X)
Thread G1½ on thread G1½
24
5Threadedadaptersandflanges-VEGAPULS64
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Part Feature Characteristic
Adapter Size, sensor side G1½
Size, process side G2
Standard DIN 3852-X
Material PTFE
Pressurestage unpressurized0.2bar
Process temperature -40…+130°C(-40…+266°F)
Max.torque 5Nm(3.688lbfft)
Product code/Art. no. GEWADA-F.TC4T3
Seal, sensor side
Material FKM
Configuration O-ringseal
Size 48 x 2 mm
Seal, pro-cess side
Material FKM
Configuration Flat seal
Size ø 68 x 59 x 2.5 mm
Fig. 35: Dimensions of threaded adapter G1½ (DIN 3852-X) on thread G2 (DIN 3852-X)
5.2 FlangesaccordingtoEN1092-1
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard EN 1092-1, Form B1
Pressurestage PN 40
Material 316L
Product code/Art. no. GEWADA-F.TC1AC
Thread G1½ on thread G2
ThreadG1½-FlangeDN40-FormB1
25
5Threadedadaptersandflanges-VEGAPULS64
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Seal Material FKM,EPDM,FFKM
Configuration Sealring
Size 42 x 3 mm
G 1 ½
ø55 mm(2.17")
ø18 mm(0.71")
ø110 mm(4.33")
ø150 mm(5.91")
30 m
m(1
.18"
)3
mm
(0.1
2")
Fig. 36: Dimensions of threaded adapter G1½ (DIN 3852-X) on flange DN 40 (EN 1092-1, Form B1) PN 40
5.3 FlangesaccordingtoASMEB16.5
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side 1½"
Standard ASMEB16.5,RF
Pressurestage 150lb
Material 316L
Product code/Art. no. GEWADA-F.TC1AH
Seal Material FKM,EPDM,FFKM
Configuration Sealring
Size 42 x 3 mm
G 1 ½
ø55 mm(2.17")
ø15,7 mm(0.62")
ø73,2 mm(2.88")
ø98,6 mm(3.88")
ø127 mm(5.00")
30 m
m(1
.18"
)
1,6
mm
(0.0
6")
Fig. 37: Dimensions of threaded adapter G1½ (DIN 3852-X) on flange 1½" (ASME B16.5, RF) 150 lb
ThreadG1½-Flange1½"-RF
26
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
6 Threadedadapter-VEGAPULS64,VEGAFLEX80series
6.1 ClampaccordingtoDIN32676,ISO2852
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.CG3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9 ")
G 3/4
ø 50,5 mm (1.99")
ø 32 mm (1.26")
Fig. 38: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
Data:Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.CA3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
ThreadG¾-Clamp1½"
ThreadG¾-Clamp2"
27
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
22,5
mm
(0.8
9")
G 3/4
ø 64 mm (2.52")
ø 32 mm (1.26")
Fig. 39: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Data:Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-B.CA3
Seal Material FKMVi780FDA,EPDMFDA
Configuration O-ringseal
Size 42 x 3 mm31
mm
(1.2
2")
G 1 1/2
ø 55 mm (2.17")
ø 64 mm (2.52")
Fig. 40: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
ThreadG1½-Clamp2"
28
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
6.2 Slottednutacc.toDIN11851
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.RA3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
30,5
mm
(1.2
0")
G 3/4
ø 56 mm (2.21")
ø 65 mm (2.56")
ø 78 mm (3.07")
ø 32 mm (1.26")
Fig. 41: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11851) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.RB3
Thread G¾ - Slotted nut DN 40
Thread G¾ - Slotted nut DN 50
29
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 42: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-B.RB3
Seal Material FKMVi780FDA,EPDMFDA
Configuration O-ringseal
Size 42 x 3 mm
Thread G1½ - Slotted nut DN 50
30
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
38 m
m(1
.46"
)
G 1 1/2
ø 55 mm (2.17")
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 68 mm (2.68")
Fig. 43: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
6.3 Slottednutacc.toDIN11864-1
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.RE3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
Thread G¾ - Slotted nut DN 40
31
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
34 m
m(1
.34
")
G 3/4
ø 78 mm (3.07")
ø 65 mm (2.56")
ø 55 mm (2.17")
ø 32 mm (1.26")
Fig. 44: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 40 (DIN 11864-1) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.RF3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
Thread G¾ - Slotted nut DN 50
32
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
34 m
m(1
.34
")
G 3/4
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 32 mm (1.26")
Fig. 45: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-B.RF3
Seal Material FKMVi780FDA,EPDMFDA
Configuration O-ringseal
Size 42 x 3 mm
Thread G1½ - Slotted nut DN 50
33
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
42 m
m(1
.65
")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 92 mm (3.62")
G 1 1/2
ø 55 mm (2.17")
Fig. 46: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
6.4 Furtherhygienicfittings
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side -
Standard DRD
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.AA3
Seal Material FKM,EPDM,FFKM
Configuration O-ringseal
Size 23.47 x 2.62 mm
Thread G¾ - DRD con-nection
34
6 Threaded adapter - VEGAPULS 64, VEGAFLEX 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
22,5
mm
(0.8
9")
G 3/4
ø 65,8 mm (2.59")
ø 54 mm (2.13")
Fig. 47: Dimensions adapter G¾ (DIN 3852-X) on DRD
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 32
Standard Tuchenhagen
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-A.TA3
Seal Material EPDM
Configuration O-ringseal
Size 23.47 x 2.62 mm
22,5
mm
(0.8
9")
G 3/4
ø 71 mm (2.8")
ø 84 mm (3.31")
ø 32 mm (1.26")
Fig. 48: Dimensions adapter G¾ (DIN 3852-X) on Tuchenhagen DN 32
Thread G¾ - Varivent DN 32
35
7 Threaded adapter - VEGABAR 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
7 Threaded adapter - VEGABAR 80 series
7.1 ClampaccordingtoDIN32676,ISO2852
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-D.GLX
Seal Sensor side -
25,5
mm
(1.0
0 ")
G 1
ø 50,5 mm (1.99")
ø 29,3 mm (1.15")
GL
Fig. 49: Dimensions of threaded adapter G1 (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-D.GMX
Seal Sensor side -
ThreadG1-Clamp1½"
ThreadG1-Clamp2"
36
7 Threaded adapter - VEGABAR 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
25,5
mm
(1.0
0 ")
G 1
ø 64 mm (2.52")
ø 29,3 mm (1.15")
G
Fig. 50: Dimensions of threaded adapter G1 (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
7.2 Varivent
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 25/32
Standard Varivent
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-D.GNX
Seal Sensor side -
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 66 mm (2.60")
ø 50 mm (1.97")
ø 29,3 mm (1.15")
GN
Fig. 51: Dimensions of threaded adapter G1 (DIN 3852-X) on Varivent Form F 25
Thread G1 - Varivent FormF25
37
7 Threaded adapter - VEGABAR 80 series
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Adapter Size, sensor side G1
Standard DIN 3852-X
Size, process side DN 40/50
Standard Varivent
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-D.GOX
Seal Sensor side -
12,3
mm
(0.4
8 ")
25,5
mm
(1.0
0 ")
G 1
ø 84 mm (3.31")
ø 68 mm (2.68")
ø 29,3 mm (1.15")
GO
Fig. 52: Dimensions of threaded adapter G1 (DIN 3852-X) on Varivent Form N 50-40
Thread G1 - Varivent FormN50-40
38
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
8 Threadedadapter-VEGACAP,VEGACAL,VEGAWAVE
8.1 VEGACAP63,64,VEGACAL63,64
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 1½"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-E.GE3
Seal Material FKMVi780FDA,EPDM
Configuration Sealring
Size ø 50.5 - 35.3 mm
22,5
mm
(0.8
9 ")
G 3/4
ø 50,5 mm (1.99")
ø 32 mm (1.26")
Fig. 53: Dimensions of threaded adapter G¾ (DIN 3852-X) on Clamp 1½" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-E.CA3
Seal Material MaterialFKMVi780FDA,EPDM
Configuration Sealring
Size ø 64 - 48 mm
ThreadG¾-Clamp1½"
ThreadG¾-Clamp2"
39
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
22,5
mm
(0.8
9")
G 3/4
ø 64 mm (2.52")
ø 32 mm (1.26")
Fig. 54: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 25
Standard DIN 11851
Pressurestage PN 25
Material 316L
Product code/Art. no. GEWADA-E.CB3
Seal Material FKMVi780FDA,EPDM
Configuration Sealring
Size ø 54 x 64 x 5 mm36
mm
(1.4
2 ")
G 3/4
ø 43,4 mm (1.71")
ø 52 mm (2.05")
ø 63 mm (2.44")
ø 32 mm (1.26")
Fig. 55: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 25 (DIN 11851) PN 25
Thread G¾ - Slotted nut DN 25
40
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 50
Standard DIN 11851
Pressurestage PN 25
Material 316L
Product code/Art. no. GEWADA-E.CBX
Seal Material -40 … 150 °C/-40 … 302 °FFKMVi780FDA,EPDM
Configuration Sealring
Size ø 54 x 64 x 5 mm
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 56: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 25
Part Feature Characteristic
Adapter Size, sensor side G¾
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-E.LA3
Seal Configuration Sealring
Size ø 54 x 64 x 5 mm
Thread G¾ - Slotted nut DN 50
ThreadG¾-Hygienicconnectionwithcom-pression nut
41
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
30,5
mm
(1.2
0 ")
G 3/4
ø 68,5 mm (2.70")
ø 78 mm (3.07")
ø 92 mm (3.62")
ø 32 mm (1.26")
Fig. 57: Dimensions of threaded adapter G¾ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
8.2 VEGAWAVE61,63
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-C.CA1
Seal Material FKM,EPDM
Configuration Sealring
Size ø 64 - 48 mm
ThreadG1½-Clamp2"
42
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
Dimensions:
31 m
m(1
.22"
)
G 1 1/2
ø 55 mm (2.17")
ø 64 mm (2.52")
Fig. 58: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2" (DIN 32676, ISO 2852) PN 16
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side Clamp 2½"
Standard DIN 32676, ISO 2852
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-C.CD3
Seal Material FKMFDA,EPDMFDA
Configuration Sealring
Size ø 77.5 - 60.7 mm31
mm
(1.2
2")
G 1 1/2
ø 55 mm (2.17")
ø 77,5 mm (3.05")
Fig. 59: Dimensions of threaded adapter G1½ (DIN 3852-X) on Clamp 2½" (DIN 32676, ISO 2852) PN 16
ThreadG1½-Clamp2½"
43
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11851
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-B.RB3
Seal Material FKMVi780FDA,EPDMFDA
Configuration Sealring
Size ø 54 x 64 x 5 mm
38 m
m(1
.46"
)
G 1 1/2
ø 55 mm (2.17")
ø 92 mm (3.62")
ø 78 mm (3.07")
ø 68 mm (2.68")
Fig. 60: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11851) PN 16
Data:Part Feature Characteristic
Adapter Size, sensor side G1½
Standard DIN 3852-X
Size, process side DN 40
Standard DIN 11864-1
Pressurestage PN 16
Material 316L
Product code/Art. no. GEWADA-B.RF3
Seal Material FKMVi780FDA,EPDMFDA
Configuration Sealring
Size ø 54 x 64 x 5 mm
Thread G1½ - Slotted nut DN 50 - DIN 11851
Thread G1½ - Slotted nut DN50-DIN11864-1
44
8 Threaded adapter - VEGACAP, VEGACAL, VEGAWAVE
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
42 m
m(1
.65
")
ø 78 mm (3.07")
ø 67 mm (2.64")
ø 92 mm (3.62")
G 1 1/2
ø 55 mm (2.17")
Fig. 61: Dimensions of threaded adapter G1½ (DIN 3852-X) on slotted nut DN 50 (DIN 11864-1) PN 16
45
9Welding,mounting
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
9 Welding,mounting
9.1 WeldinginstructionsInformation:Thefollowingweldinginstructionsareforinformationonly.Itisimpor-tantthattheweldingregulationsarealwaysobserved.TheADleafletsmustalsobenotedwhenweldingonpressurevessels.
Whenweldingstainlesssteel,utmostcleanlinessisnecessary.Rustytoolsorscrewedparts,e.g.,arenotallowed.Alsomakesurethatnomild steel is processed in the vicinity.Usesufficientinertgasfortackwelding.Makesurethatyouonlytackweld,notspot-weld.Fortackingandwelding,usepureargonprotec-tivegas.
Asuitableweldingdummymustbeusedtoavoidwarpingtheweldedsocket.
1
3
2
Fig. 62: Welding dummy1 Welded socket2 Dummy3 Pipeline or vessel wall
Itisgenerallyrecommendedtodividetheweldjointintoseveralseg-ments.
Preparations
Weldingdummy
Weldingprocedure
46
9Welding,mounting
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
48094-EN-210416
8 1
5
3
72
6
4
Fig. 63: Segmental welding
Afterweldingasegment,gototheothersideandweldthesegmentthatliesexactlyopposite.Interrupttheweldingprocessaftertwoseg-mentsandwaituntiltheweldjointcoolsorcarefullycooltheweldjointyourselfbeforeyoustartweldingagain.
Thepressurebearingcapacityoftheweldedsocketdependsonthequality of the weld as well as the material of the welded socket. In the caseofthreadedsockets,thetotalthreadlengthmustbeutilizedforpressureloading.
9.2 Mountinginstructionsthreadedandhygienicadapter
Usesuitablespannerstoscrewthesensorintotheadapter.Thespecificationsarestatedintheappropriatechaptersofthismanualorintheoperatinginstructionsmanualoftherespectivesensor.
Placetheparts,especiallywithhygienicadapters,onasuitable,cleansurface(e.g.workbench)andscrewthemtogetherwiththerespectivespecifiedtorque.
Note:Avoiddamagetothesurfaceoftheprocessfittingandadapter.Anydamagecanparticularlyimpairthehygienicproperties.
Note:Theconesealsmetal/metalorplastic/metalprovideasecuresealingwhentightenedonce.Looseningandretighteningreducesthequalityofthecontactsur-faces.Leakage,productleakageandcontaminationcanbetheresult.
Pressurebearingcapac-ity
Preparations
Mounting
47
Notes
Welded sockets and adapters • VEGAPULS 64, VEGAFLEX 80 series
4809
4-EN
-210
416
Printing date:
VEGA Grieshaber KGAm Hohenstein 11377761 SchiltachGermany
4809
4-EN
-210
416
All statements concerning scope of delivery, application, practical use and operat-ing conditions of the sensors and processing systems correspond to the information available at the time of printing.Subject to change without prior notice
© VEGA Grieshaber KG, Schiltach/Germany 2021
Phone +49 7836 50-0E-mail: [email protected]