+ All Categories
Home > Documents > Supported primarily by the Nanoscale Science and Engineering Initiative of the National Science...

Supported primarily by the Nanoscale Science and Engineering Initiative of the National Science...

Date post: 17-Jan-2016
Category:
Upload: veronica-houston
View: 214 times
Download: 0 times
Share this document with a friend
1
Supported primarily by the Nanoscale Science and Engineering Initiative of the National Science Foundation under NSF Award Number CMMI-0751621 . © Copyright Center for Scalable and Integrated NAnoManufacturing (SINAM) An NSF Nanoscale Science and Engineering Center (NSEC) Center For S calable and I ntegrated NA noM anufacturing NSF Nanoscale Science and Engineering Center (NSEC), Award # CMMI-0751621 UC Berkeley UCLA Stanford Northwestern UNCC MIT HP Labs 3112 Etcheverry Hall, University of California, Berkeley, CA 94720-1740, http://www.sinam.org 0 10 20 30 40 50 60 70 C heaper,betterconsum erproducts New w ays to detectand treathum an diseases Increased nationalsecurity and defense New w ays to clean the environm ent Physicaland m entalim provem ents for hum ans 80 nm SINAM’s goal is to establish a nano-manufacturing paradigm of new technologies that tackle critical challenges: 2D features below 20 nm; high dimensional fabrication and heterogeneous integration of multiple functionalities. Nano-Manufacturing Summer Academy/REU Connecting to research • High school students, teachers, undergrads • Short courses, lab experience, competitions, internships MS HS UG GR Discover Nanotechnology (Grades 7-12) Inquiry based modules • See and feel the Nano-world • Graduate teaching fellowships. • Piloted in Los Angeles and Oakland Interdisciplinary Curricula • Undergrad.: Nano-Mfg. design projects • Graduate: SINAM research based modules Graduate Young Investigator (GYI) • SINAM graduate student competition • GYI brings 2+ faculty from different disciplines • Funding for innovative research project Environment Environment Education, Society and Ethics Education, Society and Ethics Economic Economic Research Vision Research Vision SINAM attracts industrial partnerships through progressive research programs and collaboration initiatives. The Industrial Affiliates Program with a new standardized IP agreement helps to rapidly integrate new partners. Spin-off companies currently operate as a result of SINAM research. NanoLithoSolutions produces inexpensive nano imprint lithography tools. Synilixir Therapeutics applied system optimization schemes to search for combination drugs. Kalinex Inc. is developing technology to emulate the sense of smell, which is the only human/animal sense that has not yet been replicated in small devices and systems. Nano-CAD developed by SINAM has helped several start-ups. IRG 1: Plasmonic Nano-Manufacturing IRG 1: Plasmonic Nano-Manufacturing SINAM is responsible for gathering and disseminating the facts of nanotechnology’s potential impact on society. SINAM has liaised with the RAND corporation to study the current societal impact of Nano- Nano Fluidic Circuits Ultra Sensitive Bio- sensor Ultra Compact light source & integrated photonics 3D Terabit Memory Vision: Develop a nano-manufacturing paradigm to provide the quantum leap from lab science to industrial revolution. The impact of nanotechnology on the environment is a hot topic, both politically and scientifically. SINAM works toward a new design paradigm where energy consumption and external impacts are built into the design process. In accordance with this philosophy, efforts to characterize efficiency and environmental impacts of nano- manufacturing are paramount. Nano-scale devices have the potential to provide energy savings in certain phases of their life-cycle. However greater cost, in terms of energy, is a major trade-off with the increased precision in manufacturing. Understanding the expenditure of energy during the manufacturing phase is crucial to ensuring energy savings over a products entire life cycle. In addition, studies of environmental and social impact, manufacturing capabilities, materials use, and human and ecological toxicity are being investigated to realize a truly new paradigm Top-down plasmonic nano-manufacturing approach aimed at developing techniques for nano- fabrication in the 5–50 nm range. Adapt hard disk technology for mask- less plasmonic nano lithography (PNL). Here, 80 nm features were created using PNL system scanned at 10 m/s. Integrated Research Groups: An innovative concurrent systems engineering approach, tackles these grand challenges aimed at issues of scalability, productivity and efficiency. A nano-manufacturing paradigm will greatly impact human society as did the industrial and technological revolutions. SINAM embraces the responsibility to educate, assess environmental impact and create business. SINAM’s educational programs span all education levels and include initiatives for under-represented communities, 7 th -12 th grade programs, undergraduate summer academy and graduate young investigator program. Public perception of the potential benefits of Public perception of the potential benefits of Nanotechnology Nanotechnology 0 5 10 15 20 25 30 35 Econom ic D isruption Losing personalprivacy A rm s race B reathing nanoparticles that accum ulate in body Uncontrollable spread ofnanorobots Public perception of the potential risks of Public perception of the potential risks of Nanotechnology Nanotechnology IRG 3: Plasmonic Nano-MFG for Energy IRG 3: Plasmonic Nano-MFG for Energy IRG 2: Plasmonic Molecular Transducer Platform IRG 2: Plasmonic Molecular Transducer Platform Environment Economics Society / Ethics Nano-Manufacturing 0 200 400 600 800 1000 1200 1400 IndustrialLeverage (1000$ 2004 2005 2006 2007 2008 2009 Kalinex AFM image 80 nm 120 nm In the News AFM image of Arbitrary Patterning Plasmonic Sensors Array Yong Chen, Chih-Ming Ho UCLA Nanoimprint technology for Plasmonic Sensor Tom Hahn UCLA Dynamic Fluidic Transportation of Biomolecules Chih-Ming Ho, UCLA Surface Chemistry for Molecular Binding Heather Maynard, UCLA Functionalized Nanodiamonds as Molecular Carriers Dean Ho, Northwestern University Nano Fluidic Transistor Arun Majumdar, UCB Plasmonic Structures Solar Solar Electricity Electricity (G. Chen, Grigoropoulos, Hahn, and Prinz) Electromagnetic Simulation and Design (Chen, Grigoropoulos) Plasmonic Reactors Large scale and efficient solar harvesting Long term solar storage Solar Storage Solar Storage (Majumdar, Prinz, and G. Chen, Fréchet) ? Plasmonic Structures Molecules and Catalyst Yablonovitch, Sun, Bogy, Lavine, Y. Chen, Zhang Western Digital, Hard Disk Industry Assoc. and NLS
Transcript
Page 1: Supported primarily by the Nanoscale Science and Engineering Initiative of the National Science Foundation under NSF Award Number CMMI-0751621. © Copyright.

Supported primarily by the Nanoscale Science and Engineering Initiative of the National Science Foundation under NSF Award Number CMMI-0751621 .© Copyright Center for Scalable and Integrated NAnoManufacturing (SINAM)

An NSF Nanoscale Science and Engineering Center (NSEC)

Center For Scalable and Integrated NAnoManufacturingNSF Nanoscale Science and Engineering Center (NSEC), Award # CMMI-0751621

UC Berkeley • UCLA • Stanford • Northwestern • UNCC • MIT • HP Labs3112 Etcheverry Hall, University of California, Berkeley, CA 94720-1740, http://www.sinam.org

0 10 20 30 40 50 60 70

Cheaper, better consumer products

New ways to detect and treat humandiseases

Increased national security anddefense

New ways to clean the environment

Physical and mental improvements forhumans

80 nm

SINAM’s goal is to establish a nano-manufacturing paradigm of new technologies that tackle critical challenges: 2D features below 20 nm; high dimensional fabrication and heterogeneous integration of multiple functionalities.

Nano-Manufacturing Summer Academy/REUConnecting to research• High school students, teachers, undergrads• Short courses, lab experience, competitions, internships

MS

HS

UG

GR

Discover Nanotechnology (Grades 7-12)Inquiry based modules• See and feel the Nano-world• Graduate teaching fellowships.• Piloted in Los Angeles and Oakland

Interdisciplinary Curricula• Undergrad.: Nano-Mfg. design projects• Graduate: SINAM research based

modules

Graduate Young Investigator (GYI)• SINAM graduate student competition• GYI brings 2+ faculty from different

disciplines• Funding for innovative research project

EnvironmentEnvironment Education, Society and EthicsEducation, Society and Ethics EconomicEconomic

Research VisionResearch Vision

SINAM attracts industrial partnerships through progressive research programs and collaboration initiatives. The Industrial Affiliates Program with a new standardized IP agreement helps to rapidly integrate new partners.

Spin-off companies currently operate as a result of SINAM research. NanoLithoSolutions produces inexpensive nano imprint lithography tools. Synilixir Therapeutics applied system optimization schemes to search for combination drugs. Kalinex Inc. is developing technology to emulate the sense of smell, which is the only human/animal sense that has not yet been replicated in small devices and systems. Nano-CAD developed by SINAM has helped several start-ups.

IRG 1: Plasmonic Nano-ManufacturingIRG 1: Plasmonic Nano-Manufacturing

SINAM is responsible for gathering and disseminating the facts of nanotechnology’s potential impact on society. SINAM has liaised with the RAND corporation to study the current societal impact of Nano-manufacturing.

Nano Fluidic Circuits Ultra Sensitive Bio-sensor

Ultra Compact light source & integrated photonics

3D Terabit Memory

Vision: Develop a nano-manufacturing paradigm to provide the quantum leap from lab science to industrial revolution.

The impact of nanotechnology on the environment is a hot topic, both politically and scientifically. SINAM works toward a new design paradigm where energy consumption and external impacts are built into the design process. In accordance with this philosophy, efforts to characterize efficiency and environmental impacts of nano-manufacturing are paramount. Nano-scale devices have the potential to provide energy savings in certain phases of their life-cycle. However greater cost, in terms of energy, is a major trade-off with the increased precision in manufacturing. Understanding the expenditure of energy during the manufacturing phase is crucial to ensuring energy savings over a products entire life cycle. In addition, studies of environmental and social impact, manufacturing capabilities, materials use, and human and ecological toxicity are being investigated to realize a truly new paradigm in manufacturing design.

Top-down plasmonic nano-manufacturing approach aimed at developing techniques for nano-fabrication in the 5–50 nm range.

Adapt hard disk technology for mask-less plasmonic nano lithography (PNL). Here, 80 nm features were created using PNL system scanned at 10 m/s.

Integrated Research Groups: An innovative concurrent systems engineering approach, tackles these grand challenges aimed at issues of scalability, productivity and efficiency.

A nano-manufacturing paradigm will greatly impact human society as did the industrial and technological revolutions. SINAM embraces the responsibility to educate, assess environmental impact and create business.

SINAM’s educational programs span all education levels and include initiatives for under-represented communities, 7th-12th grade programs, undergraduate summer academy and graduate young investigator program. Public perception of the potential benefits of NanotechnologyPublic perception of the potential benefits of Nanotechnology

0 5 10 15 20 25 30 35

Economic Disruption

Losing personal privacy

Arms race

Breathing nanoparticles thataccumulate in body

Uncontrollable spread of nanorobots

Public perception of the potential risks of NanotechnologyPublic perception of the potential risks of Nanotechnology

IRG 3: Plasmonic Nano-MFG for EnergyIRG 3: Plasmonic Nano-MFG for Energy

IRG 2: Plasmonic Molecular Transducer PlatformIRG 2: Plasmonic Molecular Transducer Platform

Environment Economics

Society / EthicsNano-Manufacturing

0

200

400

600

800

1000

1200

1400

Ind

ustr

ial

Levera

ge (

1000$)

2004 2005 2006 2007 2008 2009Kalinex

AFM image

80 nm

120 nm

In the News

AFM image of Arbitrary Patterning

Plasmonic Sensors ArrayYong Chen, Chih-Ming Ho UCLA

Nanoimprint technology for Plasmonic SensorTom Hahn UCLA

Dynamic Fluidic Transportation of BiomoleculesChih-Ming Ho, UCLA

Surface Chemistry for Molecular BindingHeather Maynard, UCLA

Functionalized Nanodiamonds as Molecular CarriersDean Ho, Northwestern University

Nano Fluidic TransistorArun Majumdar, UCB

Plasmonic Structures

Solar ElectricitySolar Electricity(G. Chen,

Grigoropoulos, Hahn, and Prinz)

Electromagnetic Simulation and Design

(Chen, Grigoropoulos)

PlasmonicReactors

Large scale and efficient solar harvesting Long term solar storage

Solar StorageSolar Storage(Majumdar, Prinz, and G.

Chen, Fréchet)

?

Plasmonic Structures

Molecules and Catalyst

Yablonovitch, Sun, Bogy, Lavine, Y. Chen, Zhang Western Digital, Hard Disk Industry Assoc. and NLS

Recommended