Flat Sheet Membrane MBR Module 600 m Membrane Surface

SupratecMembrane Bio-Reactor

MBR-600

Filtration System GmbH & Co. KG

SUPRATEC Membrane Bio-Reactor (MBR) moduleSupratec Filtration System

Supratec Filtration System GmbH & Co., KG, located in Simmern/Hunsrueck Germany, is a membrane division of Supratec Group who has more than 40 years experience for waste water field, specially famous for the best fine bubble aeration system all over the world. The MBR module is providing municipalities and industries around the world with economical, comprehensive wastewater solutions.

New flat sheet membrane

Comparing with hollow fiber membrane and conventional flat sheet membrane, it is well-known that the hollow fiber membrane has high footprint density but is easily choked by sludge inside of bundles, while conventional flat sheet membrane is better to avoid choked but not able to back flush as well as low footprint density. Now Supratec new flat sheet membrane system has a very high footprint density with back flush function as your wish.

MBR System

With the advantage of simple process, better quality of outlet, easy to operate and manage, small floor area, Membrane Bio-Reactor (MBR) is recognized the Hi-Tech in the wastewater treatment currently. At present the technology has been widely used in wastewater treatment and recycling in Germany, America, Japan, Etc.

Advantage & Feature

New designed MBR module Flat sheet membrane with

permeate back flush Minimum chemical cleaning

requirement Highest footprint density as hollow

fiber module One of the biggest module

membrane surface High flux for the whole life Innovative double module layers

possible High stiff spacer to avoid

dimension changing Easy to operate with fully

automatic controller

Supratec Filtration System GmbH & Co. KG

www.supratec-filtration.de

SUPRATEC Membrane Bio-Reactor (MBR) moduleSpecification & Parameter

Membrane Material PES or PVDF

Operation Pressure 20 350 mbar

Pore size 0.03 micrometer Dry weight 590 kg

Supporter PET or PP Non-woven Air demand 60-120 m/h

Spacer High Stiff PET Textile Cleaning period 1 or 2 times/year

Dimension 2500*2300*700 (H*W*D) mm Water depth2.8 6 meters(double installation posible)

Membrane surface 600 m

2 Aeration type High efficiency plate diffuser MF650

Backflush Yes Max. Temperature 40

Flux rate 10 -- 32 l/m.h(MBR application) pH range 2 - 11

Supratec Filtration System GmbH & Co. KG

www.supratec-filtration.de

Municipal Wastewater

Industrial Wastewater

Water Reuse

Drinking Water Treatment

Grey Water Treatment

Applications

Status: May 2015

SUPRATECvon-Drais-Strae 2c D-55469 Simmern/HunsrckFon: + 49 (0 67 61) 96488252Fax: + 49 (0 67 61) 96488259

e-mail: info@supratec-filtration.de

F i l t r a t i on Sys temGmbH & Co . KG

Innovations by Supratec

Innovative TLL (Three-Layer-Lamination) technology

Highest efficieny OXYFLEX MF 650 fine bubble plate diffuser

Talent desgination of Weight-floating balance to avoid structuredeformation

Innovative double piles supporter textile spacer

No elongation problem during long-term operation due to specialtreatment of spacer