16
Security assured for complete peace of mind suredor ® Litchfield Group of Companies
The Manse suredor® fibreglass composite doors not only look good, but give long termperformance, stability and security. They include specially designed locks, handles and hinges toensure secure, reliable operation and years of good service.
DOOR LEAVES - Door skins made from GRP (Glass Reinforced Polymer), are producedusing a sheet moulded compound process, andare compression moulded to give high-definitionpanel design, offering an authentic grained timberappearance. The GRP skins are bonded to a PVC composite sub-frame, which offers complete waterproofing of the insulating core, and removesall exposed timber from the door. The insulating core of the door leaf is made from 100% CFC-free polyurethane, which provides superior thermalperformance, and enhances the doors soundproofing.
OUTER FRAME - The door leafs are hung in a specially designed,5 chamber 70mm, multiple-seal, white, fully reinforced PVCu outer frame. Low barrier-freethreshold sills are also offered to accommodate wheelchair access.
HARDWARE - The doors are fitted with high- security locks, quality hardware and door accessories.
GLAZING - The doors are available in a wide range of glass options.(See our glass leaflet for details).
Manse Masterdor LimitedHambleton GroveKnaresboroughNorth YorkshireHG5 0DB
Tel: 01423 866868Fax: 01423 866368E-mail: [email protected]
Security assured for complete peace of mind
suredor®
suredor®
Advanced specifications
Engineered compositestiles and rails
Deep grain profiledfibreglass skin
Advanced 100% CFC-freepolyurethane core
Reinforced PVCuouter frame
70mm 5 chamber
Thermally broken thresholdand weather bar
BS EN ISO 9001:2000CERT NO. FM28813
REGISTERED COMPANYNO. 11879
BS 7412KM 24619 Litchfield Group of Companies
Standard Colour Range*
All styles are available in White, Red, Green, Blue, Oak and Mahogany. Other RAL colours are alsoavailable please contact us for further information, e-mail: [email protected]
Litchfield Group of Companies Litchfield Group of Companies
White Blue Red
Red Green White
*NOTE: Due to limitations of the printing process the door colours shown in this literature are for guidance only.
suredor®
suredor®
Security assured for complete peace of mind
suredor®
Advanced specifications
Engineered compositestiles and rails
Deep grain profiled
fibreglass skin
Advanced 100% CFC-freepolyurethane core
Reinforced PVCuouter frame
70mm 5 chamber
Thermally broken thresholdand weather bar
Litchfield Group of Companies
TABLE OF CONTENTS
PAGE 1: GENERAL DESCRIPTION OF PARTS
PAGE 2: VERTICAL & HORIZONTAL CROSS SECTIONS
PAGE 3: PICTORIAL VIEW OF DOOR BLADE
PAGE 4: PICTORIAL VIEW OF OUTER FRAME
PAGE 5: GENERAL ASSEMBLY DETAILS
PAGE 6: FIRE TEST REPORT No. BTC 14434F
COMPOSITE FIRE DOOR MANUFACTURING MANUAL
PAGE 1
COMPOSITE FIRE DOORGENERAL DESCRIPTION OF PARTSSEE ALSO SHEERFRAME MANUFACTURING MANUAL FOR COMPOSITE DOORS
DOOR BLADE
LOCK KEEP
INTUMESCENT LOCK SEAL
INTUMESCENT LOCK PADS
BRUSH SEAL
INTUMESCENT MATERIAL
INTUMESCENT MATERIAL
COMPOSITE FIRE DOORVERTICAL & HORIZONTAL CROSS SECTIONS
INT - 1mm No. 1UNDER HINGE BLADE
REF. HP
INT - 1mm No. 1AROUND LOCK & KEEP
REF. LPH
INTUMESCENT LINERAROUND LETTER BOX
REF. LBL
INT - 1mm No. 1AROUND DOOR VIEWER
REF. HP
3.0
3.0
STORMGUARDPROLINE AM3
3.03.0
S118 SK77950
INTUMESCENT2mm No. 2 - ES302
INTUMESCENT2mm No. 2 - ES302
SW73144SECTION 'B-B'
SECTION 'A-A'
S118
SK77950
LETTERPLATEPADDOCKFIREMASTERP207
DOORVIEWER
NANYA FD30DOOR BLADE
A
BB
A
PAGE 2
INT - 3mm No. 2 x 25mm INSIDE REBATE
BOTH SIDES & TOPREF. ES253
INTUMESCENT2mm No. 2 - ES102
INT - 1mm No. 1UNDER BOTH HANDLES
REF. HP
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
ALL INTUMESCENT PARTSSUPPLIED BY ENVIROGRAFTEL:- 01304 842555
COMPOSITE FIRE DOORPICTORIAL VIEW OF DOOR BLADE WITH COMPONENT DESCRIPTIONS AS TESTED AT THE B.P.B. TEST CENTRE
NANYA FD30DOOR BLADE
DOOR VIEWER
INTUMESCENT LINERAROUND LETTER BOX
1mm THK. INTUMESCENTAROUND DOOR VIEWER
1mm THK. INTUMESCENTUNDER HINGE BLADES
1mm THK. INTUMESCENTBONDED WITH THIXOTROPIL
FIREPROOF ADHESIVEFIT INSIDE LOCK REBATES
1mm THK. INTUMESCENT PADSTO BOTH SIDES OF LOCK CASINGS
6 PIN BRASS CYLINDER
LETTERPLATEPADDOCK FIREMASTER
P207
HOPPE LEVERHANDLE SET
FULLEXLOCKINGMECHANISM
SW73020STAINLESS
STEEL HINGESOR
CHALLENGERFLAG HINGES
PAGE 3
1mm THK. INTUMESCENTUNDER BOTH HANDLES
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
ALL INTUMESCENT PARTSSUPPLIED BY ENVIROGRAFTEL:- 01304 842555
COMPOSITE FIRE DOORPICTORIAL VIEW OF OUTERFRAME WITH COMPONENT DESCRIPTIONS AS TESTED AT THE B.P.B. TEST CENTRE
INTUMESCENT3mm No. 2 - ES253
INTUMESCENT2mm No. 2 - ES302
INTUMESCENT BONDEDWITH THIXOTROPIL
FIREPROOF ADHESIVEFIT INSIDE LOCK REBATE
1mm THK.INTUMESCENT PADSTO BOTH SIDES OF KEEP
SELF ADHESIVEINTUMESCENT STRIP
FIT INSIDE LOCK REBATE
1mm THK.INTUMESCENT PADSTO BOTH SIDES OF KEEP
SW73174125mm x 125mm MILD STEEL BRACKETS
SW73020STAINLESS
STEEL HINGESOR
CHALLENGERFLAG HINGES
LOCKKEEP
LOCKKEEP
LATCH &DEAD BOLT
KEEP
SK77950
STORMGUARDTHRESHOLD
PROLINE AM3
PAGE 4
INTUMESCENT2mm No. 2 - ES102
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com
COMPOSITE FIRE DOOROUTERFRAME GENERAL ASSEMBLY DETAILS
Steel Reinforcementto be mitre cut withminimum gap of 1mm
STEE
L RE
INFO
RCEM
ENT
STEEL REINFORCEMENT
Threshold fixedfixed using2 x KM55 Screws
SW73174100 x 100 x 30 Bracket
fixed to steel reinforcementusing 6 x SW71574 Screws
1.20
37.75
30.5
Steel Reinforcement
A170
50mmlong
STEE
L RE
INFO
RCEM
ENT
STORMGUARD THRESHOLD
SW77
950
SW77
950
SW77950
S118
PAGE 5
Accreditations and Memberships
Testing
PAS 23-1: 1999 (General performance requirements for door assemblies)
PAS 24-1: 1999 (Enhanced security performance requirements for door assemblies)
Sold Security Test Standard – SS306-Silver Level (Door Handle Assembly).
BS 476 Part 22 Suredor FD 30 testing to satisfy the criteria for integrity and stability.
Licences
Secure by Design - Issued by the Association of Chief Police Officers (ACPO)
Kitemark Licences - PVCu windows manufactured to BS 7412
- BS 7950 / BS 7413 / EN 12608 systems kitemarks held byL.B.Plastics Ltd, our parent company.
Registrations
Constructionline Registration No: 275
FENSA (The Fenestration Self Assessment Scheme) Registration No: 11879
BS EN ISO 9001: 2000 - Quality Management System. Certificate No: FM 28813
BS EN ISO 14001: 2004 – Environmental Management System.Certificate No: EMS 507920
Certificates
FAST (Federation Against Software Theft) – Approved company/managers/auditors
CHAS (Contractors Health and Safety Assessment Scheme) – Accredited company.
Glass Charter Industry Scheme - Member.A scheme administered by The Glass sand Glazing Federation
Memberships of trade associations
The Federation of Master Builders Membership No: 19345
The Guild of Master Craftsmen Membership No: A019882
Manse Masterdor Limited
Tel: 01423 866868Fax: 01423 866368E-mail: [email protected]
suredor®
