Surface mounted luminaire

These luminaires are often the preferredchoice for general lighting where aesthetics areof high importance. By hanging from the ceilingor protruding slightly from it, architects cancreate visual focal points that enhance theoverall design.

TPS 498

TPS 498X-tend

IP 20

General Description

Features • Suitable for suspended mounting for direct/indirect lighting

•

•

• Housing made of 0.6 mm epoxy polyester powder coated extruded aluminium sheet

• Choice of optics in

Applications • Representative offices

• Reception and public service areas

• General offices, schools

• Recreational areas (restaurants, cafeterias)

• Corridors and staircases

• Department stores, boutiques

Installation • Suspension via hooks or chains in combination with the Universal

suspension set ZPH 300 US

• Also possible to join luminaires linearly

Compliances• IP 20

• Class I

Revolutionary luminaire using the cutting edge technology of 3D OLC (Omni-directional Luminance Control) lamellae.

3D OLC lamellae, with excellent glare control, provides freedom in interior design

The concave shapes of the lamellae provides excellent light- technical performance i.e. high efficiency and good uniformity.

- D6 : High - gloss optic for all round glare and beam control. This makes this optic specially suited to areas with intensive monitor use. The high efficiency of this optic is realised via the side and end reflector's optimised geometry, and the registered, uniquely designed 3D cross lamellae, with a Fresnel structure on the lamellae saddle and a concaved lower contour. The high gloss OLC optic betters the glare recommendations of both the German DIN 5035/7 BAP 60, and the British (Ex-CIBSE Lighting Guide 3, Cat 2).

Dimensions (mm)

X-tend TPS 498

245

39 83

11601296

630

1352

Surface Mounted CFL Luminaires

Surface Mounted Luminaires

6

Surface-Mounted CFL Luminaires

TPS 498X-tend

Technical Data

Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor

TPS 498/136 HPF 1 x 'TL'D 36W 240 0.23 0.90

TPS 498/136 HF 1 x 'TL'D 36W 240 0.16 0.98

TPS 498/236 HPF 2 x 'TL'D 36W 240 0.46 0.90

TPS 498/236 HF 2 x 'TL'D 36W 240 0.32 0.98

*Also available in 28W TL-5 lamp options

Ordering Data

Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )

TCS 498/136 HPF 1301 01515

TCS 498/136 HF D6 T.B.D. 1 1560 x 270 x 100 4.20 5.50 0.042

TCS 498/136 HPF 1301 01525 1 1560 x 270 x 100 5.10 6.50 0.042

TCS 498/136 HPF 1301 01545 1 1560 x 270 x 100 4.90 6.00 0.042

ZPH 300 US 1340 42205 1 - - - -

Suspension Kit

1 1560 x 270 x 100 4.60 6.00 0.042

7

Surface Mounted Luminaires

IP 20

General Description

Features •• Suitable for surface mounting on ceilings

• 3 types of louvres M2, M6 and D6

•

•

• Housing made of epoxy polyester powder-coated CRCA sheet, with perforated in-fill panel

• Choice of optics in

Applications • Representative offices

• Reception and public service areas

• General offices, schools

• Recreational areas (restaurants, cafeterias)

• Corridors and staircases

• Department stores, boutiques

Installation• Suspension via hooks or chains

Compliances• IP 20

• Class I

Revolutionary luminaire using the cutting-edge technology of 3D OLC (Omni-directional Luminance Control) lamellae.

Compact luminaire height of 79 mm

3D OLC lamellae, with excellent glare control, provides freedom in interior design

The concave shapes of the lamellae provides excellent light- technical performance i.e. high efficiency and good uniformity.

- M2 : Decorative optic with high efficiency, realised via the side and end reflectors, optimised geometry, and matt aluminium cross lamellae of fine quality material, with a concaved lower contour and a tapered ripple effect which provide pleasant illuminance over the optic's opening. - M6 : Matt optic for all-round glare and beam control. This makes the optic specially suited to areas with occasional monitor use. The high efficiency of this optic is realised via the side-and end reflector's optimised geometry, and registered, uniquely designed 3D cross lamellae with a Fresnel structure on the lamellae saddle and a concaved lower controur. This matt OLC optic betters the glare recommendations of the British (Ex-CIBSE) Lighting Guide 3, Cat 3.- D6 : High - gloss optic for all round glare and beam control. This makes this optic specially suited to areas with intensive monitor use. The high efficiency of this optic is realised via the side and end reflector's optimised geometry, and the registered, uniquely designed 3D cross lamellae, with a Fresnel structure on the lamellae saddle and a concaved lower contour. The high gloss OLC optic betters the glare recommendations of both the German DIN 5035/7 BAP 60, and the British(Ex- CIBSE) Lighting Guide 3, Cat 2.

TCS 398X-tend

TCS 398 / 2/1 x 36 D6

TCS 398 / 236 D6

TCS 398 / 236 M2

Dimensions (mm)

A

B C79

Xtend TCS 398

TCS 398 2/1 X 36W 1263 1310 195

TCS 398 2 X 36W 1263 1310 311

AType B C

Surface Mounted Luminaires

8

Surface Mounted Luminaires

TCS 398X-tend

Technical Data

Type For Lamp Nominal Mains Nominal Voltage (V) Current (A) Power Factor

TCS 398/236 HPF 2 x 'TL'D 36W 240 0.46 0.90

TCS 398/2/ 1 x 36 HPF 2 x 'TL’D 36W 240 0.46 0.90

TCS 398/236 HF 2 x 'TL'D 36W 240 0.32 0.98

TCS 398/2/1 x 36 HF 2 x 'TL'D 36W 240 0.32 0.98

Also available with 2 x ‘TL’ 5 28 W lamps / 2 x ‘TL’ 5 54W HO Lamps

Ordering Data

Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume3per box (mm) (kg) (kg) (m )

TCS 398/236 HPF M2 1300 32555 1 1390 x 325 x 90 5.20 0.041

TCS 398/236 HPF M6 1300 32575 1 1390 x 325 x 90 5.20 6.20 0.041

TCS 398/236 HPF D6 1300 32595 1 1390 x 325 x 90 5.20 6.20 0.041

TCS 398/236 HF M2 1300 42455 1 1390 x 325 x 90 5.00 6.00 0.041

TCS 398/236 HF M6 1300 46465 1 1390 x 325 x 90 5.00 6.00 0.041

TCS 398/236 HF D6 1300 42475 1 1390 x 325 x 90 5.00 6.00 0.041

TCS 398/2/ 1 x 36 HPF M2 1300 32615 1 1390 x 207 x 90 4.10 5.00 0.026

TCS 398/2/ 1 x 36 HPF M6 1300 32635 1 1390 x 207 x 90 4.10 5.00 0.026

TCS 398/2/ 1 x 36 HPF D6 1300 32655 1 1390 x 207 x 90 4.10 5.00 0.026

TCS 398/2/ 1 x 36 HF M2 1300 32625 1 1390 x 207 x 90 3.90 4.90 0.026

TCS 398/2/ 1 x 36 HF M6 1300 42495 1 1390 x 207 x 90 3.90 4.90 0.026

TCS 398/2/ 1 x 36 HF D6 1300 42505 1 1390 x 207 x 90 3.90 4.90 0.026

6.20

9

Surface Mounted Luminaires TCS 306

General DescriptionWidespread mirror optics luminaires for surface as well as recessed mounting, suitable for ‘TL’D /‘TL’ fluorescent lamps.

Features• Housing made of CRCA sheet steel, powder-coated white,

accommodating all electrical accessories pre-wired upto a terminal block

• Innovative corner brackets made of engineering plastic to enhance the aesthetics

• Specially designed optical system of high purity aluminium, with matt lamellae. The reflector is fixed to the housing by mirror holding clips and can be hinged to the housing during installation / maintenance

• High-efficiency mirror optic reflector of high quality aluminium with diffuse lamellae designed for high optical efficiency and widespread light distribution

Applications• Small offices

• Conference rooms

• Reception and public service areas

• Recreational areas (restaurants, cafeterias)

• Shops & boutiques

Installation• Provision for recessed mounting or direct on surface. Can also be

pendent mounted.

Compliances• IP 20

IP 20

TCS 306 / 236

TCS 306 / 136

Dimensions (mm)

2x36W

TCS 306

1280

600

215

Surface Mounted Luminaires

10

Surface Mounted Luminaires

TCS 306

Technical Data

Type For Lamp Nominal Mains NominalVoltage (V) Current (A) Power Factor

TCS 306/236 HPF 2 x ‘TL’D 36W 240 0.46 0.90

TCS 306/236 HF 2 x ‘TL’D 36W 240 0.30 0.95

TCS 306/136 HPF 1 x ‘TL’D 36W 240 0.23 0.90

TCS 306/136 HF 1 x ‘TL’D 36W 240 0.16 0.95

Ordering Data

Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )

TCS 306/236 HPF 1304 07495 2 1330 x 275 x 205 4.30 x 2 10.00 0.074

TCS 306/236 HF 1304 04605 2 1330 x 275 x 205 3.80 x 2 10.00 0.074

TCS 306/136 HPF 1301 01505 2 1330 x 275 x 205 3.30 x 2 9.00 0.074

TCS 306/136 HF 1300 04615 2 1330 x 275 x 205 3.00 x 2 9.00 0.074

11

Surface Mounted Luminaires TCS 605

TCS 605 / 236

TCS 605 / 136

General DescriptionWidespread mirror optics luminaires for surface-mounting in ceilings suitable for ‘TL’D /‘TL’ fluorescent lamps.

Features• Housing made of CRCA sheet steel, powder-coated white,

accommodating all electrical accessories pre-wired upto a terminal block

• End plates /moulded end plates with white paint

• Designed for surface mounting.

• High-efficiency mirror optics of high quality aluminium with faceted side reflectors and diffusing white lamellae.

Applications• Small offices

• Conference rooms

• Reception and public service areas

• Recreational areas (restaurants, cafeterias)

• Shops & boutiques

• Vertical displays

Installation • Provision for pendent mounting or direct on surface

Compliances• IP 20

IP 20Dimensions (mm)

2x36W

TCS 605

1240

600

245

65

Surface Mounted Luminaires

12

Surface Mounted Luminaires

TCS 605

Technical Data

Type For Lamp Nominal Mains Nominal Voltage (V) Current (A) Power Factor

TCS 605/136 HPF 1 x ‘TL’D 36W 240 0.23 0.90

TCS 605/136 HF 1 x ‘TL’D 36W 240 0.16 0.95

TCS 605/236 HPF 2 x ‘TL’D 36W 240 0.46 0.90

TCS 605/236 HF 2 x ‘TL’D 36W 240 0.30 0.95

Ordering Data

Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3 per box (mm) (kg) (kg) (m )

TCS 605/136 HPF 1304 06575 2 1295 x 280 x 200 7.00 x 2 16.40 0.067

TCS 605/136 HF 1304 07515 2 1295 x 280 x 200 6.00 x 2 14.00 0.067

TCS 605/236 HPF 1304 06565 2 1295 x 280 x 200 7.50 x 2 17.40 0.067

TCS 605/236 HF 1304 05365 2 1295 x 280 x 200 6.20 x 2 14.50 0.067

13

Surface Mounted Luminaires TCS 19

TCS 19 / 236

TCS 19 / 136

General DescriptionFunctional glare free luminaires for surface mounting in ceilings suitable for ‘TL’D /‘TL’ fluorescent lamps.

Features• Housing made of CRCA sheet steel, powder-coated grey

accommodating all electrical accessories pre-wired upto a terminal block

• Cover made of opal acrylic

• Designed for surface mounting on ceilings

Applications• Small offices

• Reception and public service areas

• Recreational areas (restaurants, cafeterias)

• Shops

Installation• Provision for suspension through Ø19mm conduit or direct on

surface.

Compliances• IP 20

2x36W2x18W

TCS 19/218

646

97

155

1240

TCS 19/136

96

76

1240

TCS 19/236

97

155

TCS 19

Dimensions (mm)

IP 20

TCS 19

Technical Data

Type For Lamp Nominal Mains Nominal Power Voltage (V) Current (A) Factor

TCS 19/136 LPF 1 x ‘TL’D 36W / ‘TL’ 40W 240 0.42 0.44

TCS 19/136 HPF 1 x ‘TL’D 36W / ‘TL’ 40W 240 0.23 0.90

TCS 19/136 HF 1 x ‘TL’D 36W / ‘TL’ 40W 240 0.16 0.95

TCS 19/236 LPF 2 x ‘TL’D 36W / ‘TL’ 40W 240 0.84 0.44

TCS 19/236 HPF 2 x ‘TL’D 36W / ‘TL’ 40W 240 0.46 0.90

TCS 19/236 HF 2 x ‘TL’D 36W / ‘TL’ 40W 240 0.30 0.95

TCS 19/218 HPF 2 x ‘TL’D 18W / ‘TL’ 20W 240 0.23 0.90

Ordering Data 3Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume (m )

per box (mm) (kg) (kg)

TCS 19/136 LPF 1304 07085 4 1349 x 170 x 209 1.85 x 4 9.10 0.048

TCS 19/136 HPF 1304 07075 4 1349 x 170 x 209 1.886 x 4 9.20 0.048

TCS 19/136 HF 1304 22575 4 1310 x 165 x 215 2.00 x 4 9.70 0.046

TCS 19/236 LPF 1304 07135 4 1360 x 325 x 232 2.96 x 4 13.24 0.098

TCS 19/236 HPF 1304 07145 4 1360 x 325 x 232 3.00 x 4 13.40 0.098

TCS 19/236 HF 1301 05325 4 1360 x 325 x 232 1,98 x 4 9.32 0.167

TCS 19/218 HPF 1304 07155 4 700 x 410 x 310 2.00 x 4 9.50 0.087

Surface Mounted Luminaires

Surface Mounted Luminaires

14 15

Technical Data

Ordering Data

Surface Mounted CFL Luminaires

FCS 31

Type For Lamp Nominal Voltage Mains Current Nominal Power Factor(V) (A)

FCS 31 / 209 2 X PL-S 9 W 240 0.15 0.45

FCS 31 / 211 2 X PL-S 11 W 240 0.30 0.45

Type Ordering No. Dimensions

FCS 31 / 209 1304 07005 2 390 x 325 x 175 2.60 x 2 6.50 0.022

FCS 31 / 211 1304 07005 2 390 x 325 x 175 2.60 x 2 6.50 0.022

Quantity Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )

FCS 31Surface Mounted CFL Luminaires

FCS 31/ 211

General Description

Features• Housing made of M.S. CRCA sheet steel, painted white,

accommodating all electrical accessories pre-wired upto a terminal block.

• A reflector assembly, made of high purity aluminium sheet, electrochemically brightened and anodised, fitted with aluminium lamellae.

• Stainless spring clips for fixing the reflector to the housing.

Applications• Representatives offices

• Conference rooms

• Small offices

• General open plan offices

• Reception and public service areas

• Corridors and staircases

• Recreational areas (sport halls, restaurants, cafeterias)

• Department stores, Fashion shops

• Small independent food/non-food shops

Installation•

Compliances• IP 20

• Class I

Surface mounted luminaire suitable for use with PL-S 9W/11W compact fluorescent lamps.

Designed for surface mounting on ceilings.

IP 20

Dimensions (mm)

FCS 31

Surface Mounted CFL Luminaires

30570

300

16 17

Surface Mounted CFL Luminaires

FCS 518Lotus

Technical Data

Type For Lamp Nominal Mains Current Nominal Power Voltage (V) (A) Factor

FCS 518 / 209 2 X PL-S 9 W 240 0.15 0.45

FCS 518 / 211 2 X PL-S 11 W 240 0.30 0.45

FCS 518 / 218 2 X PL-L 18 W 240 0.40 0.48

Ordering Data

Type Ordering no. Quantity Dimensions Net Weight Gross Weight Volumeper box (mm) (kg) (kg) (m )

FCS 518 / 209 1340 13575 4 700 x 590 x 165 4.00 x 1.25 7.00 0.068

FCS 518 / 211 1340 13565 4 700 x 590 x 165 4.00 x 1.50 8.00 0.068

FCS 518 / 218 1304 04525 4 700 x 590 x 165 4.00 x 1.50 9.00 0.068

3

Surface Mounted CFL Luminaires FCS 518Lotus

General DescriptionSurface mounted luminaire suitable for use with 2 X PLS 9/11/18W compact fluorescent lamps

Features• Aesthetically designed 3D profile, high grade engineering plastic

housing.

• Ventilation slits to provide better thermal performance, and add to the interior ambiance.

• Imported pre anodised optically designed mirrors for efficient & uniform lighting effect

• Mirror assembly and lamellae are integrated with the housing, and is click fixed with the gear tray with 4 cam springs.

Applications• Reception & public service areas

• High end offices

• Conference rooms

• Recreational areas

• Departmental stores

• Shops, boutiques

• Staircase landings

Installation• Designed for surface mounting on ceilings.

Compliances• IP 20

• Class I

IP 20

Dimensions (mm)

FCS 518

306

159

250

67.5

Surface Mounted CFL Luminaires

FCS 518

18 19

TPH 824Sereno

/ TPS 814

IP 20

General Description

Features •

•

••

•

Applications •••••

Installation •

•

•

Compliances• IP 20

• Class I

Advanced surface / Suspended and wall mounted luminaires with D8 Micro-optics/ OD Optics / Indirect optics specially designed for T5 Lamps. These luminaires offer the best combination of performance and energy efficiency.Sereno Luminaires offer the latest technology for high comfort and optical efficiency in a miniature profile.

Suitable for surface / Suspension / wall mounting (Depending on version)

D8 Micro-optics with excellent glare control (Designed for UGR 19) (In D8 versions)

OD Optics for diffused direct lighting (In OD versions)

Indirect Optics for high comfort indirect lighting (In Indirect versions)

The high efficiency optical system offers the best package for excellent uniformity and glare control

Software offices / Corporate offices

Receptions and lobbies

Schools and colleges

Open plan offices / Executive cabins

Conference rooms

Suspension arrangement for TPH 824 range with optional suspension accessory

Wall mounting arrangement for TPH 824 range with optional wall mounting bracket

Direct Surface mounting for TPS 814 range

Dimensions (mm)

Surface Mounted/Suspended Luminaires

TPH 824 D8 DI HF

Surface Mounted/Suspended Luminaires

TPH 824 OD HF

20

Surface Mounted

Suspended

TPS 814/414 D8 HF TPS 814 D8 HF

Surface Mounted

Suspended

TPH 824 I HF

TPH 824/228

1242

1251

198

207

1119

TPH 824/214

642

651

198

207

11486

FOR INDIRECT & CD VERSIONS VIEW & DIMENSIONS WILL BE SAME

TPS 814/414

TPS 814/228600

2051251

370

651651

380

651

TPH 824 / TPS 814Sereno

Surface Mounted/Suspended Luminaires

21

Technical Data

Type For Lamp Nominal Mains Current Nominal Voltage (V) (A) Power Factor

Suspended/ Wall MountedTPH 824/214 D8 DI HF 2 x TL5 14W 240 0.14 0.98TPH 824/214 OD HF 2 x TL5 14W 240 0.14 0.98TPH 824/214 I HF 2 x TL5 14W 240 0.14 0.98TPH 824/228 D8 DI HF 2 x TL5 28W 240 0.27 0.98TPH 824/228 OD HF 2 x TL5 28W 240 0.27 0.98TPH 824/228 I HF 2 x TL5 28W 240 0.27 0.98TPH 824/254 D8 DI HF 2 x TL5 54W 240 0.50 0.99TPH 824/254 OD HF 2 x TL5 54W 240 0.50 0.99TPH 824/254 I HF 2 x TL5 54W 240 0.50 0.99Surface MountedTPS 814/228 D8 HF 2 x TL5 28W 240 0.27 0.98TPS 814/254 D8 HF 2 x TL5 54W 240 0.50 0.99TPS 814/414 D8 HF 4 x TL5 14W 240 0.28 0.96

Ordering Data

Type Ordering No Quantity Dimensions Net Weight Gross Weight Volume 3per box (mm) (kg) (kg) (m )

Suspended/ Wall MountedTPH 824/214 D8 DI HF 135021425 2nos. 750 x 307 x 130 2.20 5.50 0.0299TPH 824/214 OD HF 135021475 2nos. 750 x 307 x 130 2.00 5.00 0.0299TPH 824/214 I HF 135021465 2nos. 750 x 307 x 130 2.00 5.00 0.0299TPH 824/228 D8 DI HF 135021415 2nos. 1350 x 307 x 130 3.00 7.40 0.0539TPH 824/228 OD HF 135021485 2nos. 1350 x 307 x 130 2.70 6.80 0.0539TPH 824/228 I HF 135021455 2nos. 1350 x 307 x 130 2.60 6.50 0.0539TPH 824/254 D8 DI HF 135021495 2nos. 1350 x 307 x 130 3.00 7.40 0.0539TPH 824/254 OD HF 135021505 2nos. 1350 x 307 x 130 2.70 6.80 0.0539TPH 824/254 I HF 135021515 2nos. 1350 x 307 x 130 2.60 6.50 0.0539ZPH 524 (Suspension Set) 135021625 1 Set 170 x 155 x 75 0.20 0.30 0.0020ZPH 525 (Cascading Kit) 135021635 4 Nos. 170 x 155 x 75 0.50 0.75 0.0020ZWH 526 (Wall Mtg Bkt for 2 Ft Luminaire) 135021645 2nos. 270 x 75 x 75 …. …. 0.0015ZWH 527 (Wall Mtg Bkt for 4 Ft Luminaire) 135021655 2nos. 370 x 75 x 75 …. …. 0.0021Surface MountedTPS 814/228 D8 HF 135021445 2nos. 1320 x 275 x 130 4.00 9.50 0.0472TPS 814/254 D8 HF 135021525 2nos. 1320 x 275 x 130 4.00 9.50 0.0472TPS 814/414 D8 HF 135021435 2nos. 720 x 720 x 130 5.30 12.00 0.0674