Copyright by sFoam 2004 www.sFoam.com [email protected]
Surfboard Blank Catalog
Surfboard Blank Catalog
- 12.77 ” -
- 20.50 ” -
- 15.09 ” -
5.56 ”
sFoam222 West Broad St
Freeport, TX 77541
sales 979-633-4324
March 13, 2009
0.36 ”---
1.38 ”---
0.41 ”---
1.29 ”---
4.24 ”---
2.70 ”---
— 2.75 ”
— 1.95 ”
— 2.09 ”
ao
Rv io
s
Mjor R
ckere is
n !
www.sfoam.com
In StockRockers
6’ 0” F
Tip-to-Tip Length : 6 ’ 0 “
Maximum Thickness: 2.54 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.26 ”---
1.16 ”---
0.29 ”---
1.10 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish Series
3.92 ”---
2.49 ”---
— 2.54 ”
— 1.83 ”
— 1.96 ”
rev. 01.30.06
6’ 0” TF
Tip-to-Tip Length : 6 ’ 0 “
Maximum Thickness: 2.63 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.33 ”---
1.44 ”---
0.20 ”---
0.72 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Twin FinLowered tail rocker, extratail and nose thickness.
4.5 ”---
1.50 ”---
— 2.63 ”
— 2.00 ”
— 1.90 ”
rev. 01.30.06
6’ 1” XP
Tip-to-Tip Length : 6 ’ 1 “
Maximum Thickness: 2.50 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.28 ”---
1.49 ”---
0.25 ”---
0.93 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.66 ”
4.75 ”---
2.25 ”---
— 1.83 ”
— 2.50 ”
rev. 01.30.06
6’ 3” RP
Tip-to-Tip Length : 6 ’ 3 “
Maximum Thickness: 2.62 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.25 ”---
1.41 ”---
0.33 ”---
0.95 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Rounded Point / Micro GunSeries
4.82 ”---
1.98 ”---
— 2.62 ”
— 1.85 ”
— 1.77 ”
rev. 08.24.05
6’ 3” XP
Tip-to-Tip Length : 6 ’ 3 “
Maximum Thickness: 2.63 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.31 ”---
1.46 ”---
0.20 ”---
0.83 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.68 ”
4.75 ”---
2.25 ”---
— 1.97 ”
— 2.63 ”
rev. 01.30.06
6’ 5” XP
Tip-to-Tip Length : 6 ’ 5 “
Maximum Thickness: 2.75 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.34 ”---
1.51 ”---
0.21 ”---
0.84 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.88 ”
4.75 ”---
2.25 ”---
— 1.91 ”
— 2.75 ”
rev. 01.30.06
6’ 6” F
Tip-to-Tip Length : 6 ’ 6 “
Maximum Thickness: 2.75 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.36 ”---
1.38 ”---
0.41 ”---
1.29 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish Series
4.24 ”---
2.70 ”---
— 2.75 ”
— 1.95 ”
— 2.08 ”
rev. 01.30.06
6’ 9” S
Tip-to-Tip Length : 6 ’ 9 “
Maximum Thickness: 2.90 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.40 ”---
1.63 ”---
0.38 ”---
1.12 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Squash Tail Series
5.13 ”---
2.30 ”---
— 2.90 ”
— 2.05 ”
— 2.18 ”
rev. 01.30.06
7’ 2” FN
Tip-to-Tip Length : 7 ’ 2 “
Maximum Thickness: 3.00 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.84 ”---
5.33 ”---
1.17 ”---
2.22 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Fun Shape / Egg Series0.55 ”---
0.48 ”---
— 2.11 “
— 2.00 ”
— 3.00 ”
rev. 01.30.06
7’ 6” FN
Tip-to-Tip Length : 7 ’ 6 “
Maximum Thickness: 3.13 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.62 ”---
2.00 ”---
0.57 ”---
1.26 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Fun Shape / Egg Series
— 2.00 ”
5.57 ”---
2.32 ”---
— 2.07 ”
— 3.13 ”
rev. 01.30.06
7’ 8” FN
Tip-to-Tip Length : 7 ’ 8 “
Maximum Thickness: 3.20 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.69 ”---
2.10 ”---
0.58 ”---
1.31 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Fun Shape / Egg Series
— 1.82 ”
5.69 ”---
2.37 ”---
— 1.76 ”
— 2.95 ”
rev. 08.24.05
8’ 0” N
Tip-to-Tip Length : 8 ’ 0 “
Maximum Thickness: 3.13 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.92 ”---
2.08 ”---
0.62 ”---
1.61 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Mini LongboardFlat sweet spot on bottomfrom mid point to 5 inches towards tail.
— 1.87 ”
3.69 ”---
3.16 ”---
— 1.91 ”
— 3.13 ”
0.24 ”---
0.11 ”---
rev. 01.30.06
8’ 0” PL
Tip-to-Tip Length : 8 ’ 0 “
Maximum Thickness: 3.00 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.86 ”---
2.24 ”---
0.56 ”---
1.48 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Thinner PerformanceLongboard
— 1.96 ”
4.87 ”---
2.85 ”---
— 1.84 ”
— 3.00 ”
0.22 ”---
0.22 ”---
rev. 01.30.06
8’ 6” N
Tip-to-Tip Length : 8 ’ 6 “
Maximum Thickness: 3.25 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.12 ”---
2.30 ”---
0.88 ”---
1.98 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spoton bottom from center to 3inchs towards tail.
— 1.86 ”
3.94 ”---
3.57 ”---
— 1.94 ”
— 3.25 ”
0.34 ”---
0.26 ”---
rev. 01.30.06
9’ 0” N
Tip-to-Tip Length : 9 ’ 0 “
Maximum Thickness: 3.38 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.29 ”---
2.54 ”---
1.05 ”---
2.19 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spoton bottom from center 3inches towards tail.
— 1.92 ”
4.16 ”---
3.77 ”---
— 1.88 ”
— 3.38 ”
0.37 ”---
0.47 ”---
rev. 01.30.06
9’ 0” SPI
Tip-to-Tip Length : 9 ’ 0 “
Maximum Thickness: 3.32 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2009
www.sfoam.com
1.00 ”---
2.31 ”---
0.85 ”---
1.80 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:South Padre IslandPerformance longboardFlat "sweet spot"from center to 5" back.Extra thick for high-domedeck.
— 1.76 ”
5.02 ”---
3.16 ”---
— 1.92 ”
— 3.32 ”
0.30 ”---
0.31 ”---
9’ 3” N
Tip-to-Tip Length : 9 ’ 3 “
Maximum Thickness: 3.37 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2009
www.sfoam.com
1.35 ”---
2.55 ”---
1.09 ”---
2.21 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spoton bottom from center 3inches towards tail.
— 2.02 ”
4.16 ”---
3.78 ”---
— 1.98 ”
— 3.38 ”
0.38 ”---
0.53 ”---
9’ 3” SPI
Tip-to-Tip Length : 9 ’ 3 “
Maximum Thickness: 3.32 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2009
www.sfoam.com
1.06 ”---
2.37 ”---
0.91 ”---
1.84 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:South Padre IslandPerformance Longboard
— 1.64 ”
5.02 ”---
3.16 ”---
— 1.88 ”
— 3.32 ”
0.32 ”---
0.31 ”---Flat "sweet spot"from center to 5" back.Extra thick for high-domedeck.
9’ 6” N
Tip-to-Tip Length : 9 ’ 6 “
Maximum Thickness: 3.38 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.50 ”---
2.73 ”---
1.20 ”---
2.39 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spoton bottom from center 3 inches towards tail.
— 1.92 ”
4.38 ”---
3.99 ”---
— 1.86 ”
— 3.38 ”
0.45 ”---
0.60 ”---
rev. 01.30.06
10’ 0” N
Tip-to-Tip Length : 10 ’ 0 “
Maximum Thickness: 3.44 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.67 ”---
2.95 ”---
1.38 ”---
2.58 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments: LongboardFlat “ sweet spot “ on bottom3 “ towards tail.
4.63 ”---
4.21 ”---
— 3.44 ”
— 1.87 ”
— 1.81 ”
0.58 ”---
0.13 ”---
0.18 ”---
0.78 ”---
rev. 01.30.06
SpecialOrder
Rockers
5’ 2” G
Tip-to-Tip Length : 5 ’ 2 “
Maximum Thickness: 2.10 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
4.18 ”---
— 2.10 ”
— 1.59 ”
— 1.64 ”
Copyright by sFoam 2004
www.sfoam.com
0.14 ”---
1.08 ”---
0.09 ”---
1.86 ”---
0.71 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose, 12 “ from tail and 24 “ from tail.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
rev. 08.24.05
5’ 6” TF
Tip-to-Tip Length : 5 ’ 6 “
Maximum Thickness: 2.14 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.20 ”---
1.12 ”---
0.11 ”---
0.57 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Twin Fin Series
3.90 ”---
1.29 ”---
— 2.14 ”
— 1.62 ”
— 1.54 ”
rev. 08.24.05
5’ 9” TF
Tip-to-Tip Length : 5 ’ 6 “
Maximum Thickness: 2.39 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.26 ”---
1.31 ”---
0.15 ”---
0.66 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Twin Fin Series
4.33 ”---
1.44 ”---
— 2.39 ”
— 1.80 ”
— 1.71 ”
rev. 08.24.05
5’ 9” XP
Tip-to-Tip Length : 5 ’ 9 “
Maximum Thickness: 2.26 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.25 ”---
1.20 ”---
0.20 ”---
0.81 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.44 ”
4.51 ”---
2.25 ”---
— 1.78 ”
— 2.26 ”
5’ 10” F
Tip-to-Tip Length : 5 ’ 10 “
Maximum Thickness: 2.25 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.21 ”---
1.08 ”---
0.26 ”---
1.05 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish
— 1.48 ”
3.81 ”---
2.42 ”---
— 1.64 ”
— 2.25 ”
rev. 08.24.05
5’ 11” XP
Tip-to-Tip Length : 5 ’ 11 “
Maximum Thickness: 2.13 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.25 ”---
1.37 ”---
0.22 ”---
0.91 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.47 ”
4.75 ”---
2.25 ”---
— 1.57 ”
— 2.13 ”
6’ 0” RF
Tip-to-Tip Length : 6 ’ 0 “
Maximum Thickness: 2.88 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.07 ”---
0.59 ”---
0.24 ”---
0.82 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
Close tolerance Retro Fishblank. Should finish out at2.75 thickness. Can bescaled to fit.Special pricing applies to thisblank, due to extra thickness.
— 2.57 ”
2.96 ”---
1.70 ”---
— 2.33 ”
— 2.88 ”
rev. 08.24.05
6’ 0” S
Tip-to-Tip Length : 6 ’ 0 “
Maximum Thickness: 2.25 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.21 ”---
1.26 ”---
0.21 ”---
0.88 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
4.58 ”---
2.05 ”---
— 2.25 ”
— 1.54 ”
— 1.65 ”
rev. 08.24.05
6’ 0” XP
Tip-to-Tip Length : 6 ’ 0 “
Maximum Thickness: 2.28 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.26 ”---
1.40 ”---
0.24 ”---
0.92 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.50 ”
4.75 ”---
2.25 ”---
— 1.61 ”
— 2.28 ”
6’ 2” F
Tip-to-Tip Length : 6 ’ 2 “
Maximum Thickness: 2.48 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.30 ”---
1.23 ”---
0.33 ”---
1/17 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish Series
4.03 ”---
2.56 ”---
— 2.48 ”
— 1.72 ”
— 1.70 ”
rev. 08.24.05
6’ 2” XP
Tip-to-Tip Length : 6 ’ 2 “
Maximum Thickness: 2.38 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.30 ”---
1.44 ”---
0.18 ”---
0.81 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.51 ”
4.75 ”---
2.25 ”---
— 1.73 ”
— 2.38 ”
6’ 3” S
Tip-to-Tip Length : 6 ’ 3 “
Maximum Thickness: 2.38 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.27 ”---
1.38 ”---
0.27 ”---
0.97 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Squash Tail Series
4.76 ”---
2.13 ”---
— 2.38 ”
— 1.60 ”
— 1.73 ”
rev. 08.24.05
6’ 4” F
Tip-to-Tip Length : 6 ’ 4 “
Maximum Thickness: 2.56 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.33 ”---
1.30 ”---
0.34 ”---
1.23 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish Series
4.14 ”---
2.63 ”---
— 2.56 ”
— 1.68 ”
— 1.72 ”
rev. 08.24.05
6’ 6” RP
Tip-to-Tip Length : 6 ’ 6 “
Maximum Thickness: 2.74 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.48 ”---
1.71 ”---
0.24 ”---
0.74 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Rounded Point / Micro GunSeriesLower tail rocker, extra thick-ness in tail and nose.
4.90 ”---
1.50 ”---
— 2.74 ”
— 2.01 ”
— 2.06 ”
rev. 08.24.05
6’ 6” S
Tip-to-Tip Length : 6 ’ 6 “
Maximum Thickness: 2.50 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.33 ”---
1.51 ”---
0.31 ”---
1.03 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Squash Tail Series
4.95 ”---
2.22 ”---
— 2.50 ”
— 1.68 ”
— 1.80 ”
rev. 08.24.05
6’ 6” XP
Tip-to-Tip Length : 6 ’ 6 “
Maximum Thickness: 2.50 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.37 ”---
1.54 ”---
0.23 ”---
0.86 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.68 ”
4.75 ”---
2.25 ”---
— 1.73 ”
— 2.50 ”
6’ 8” F
Tip-to-Tip Length : 6 ’ 8 “
Maximum Thickness: 2.63 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.41 ”---
1.44 ”---
0.44 ”---
1.36 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Modern Fish Series
4.36 ”---
2.75 ”---
— 2.63 ”
— 1.78 ”
— 1.92 ”
rev. 08.24.05
6’ 9” XP
Tip-to-Tip Length : 6 ’ 9 “
Maximum Thickness: 2.88 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.44 ”---
1.66 ”---
0.26 ”---
0.92 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
“XtraPerformance”Close tolerance, Competition -Style blanks.Short board series 5 ‘ 9 “ through 6 ‘ 9 “.
— 1.79 ”
4.92 ”---
2.33 ”---
— 2.05 ”
— 2.88 ”
7’ 0” S
Tip-to-Tip Length : 7 ’ 0 “
Maximum Thickness: 2.75 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.43 ”---
1.72 ”---
0.43 ”---
1.20 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Squash Tail Series
5.27 ”---
2.39 ”---
— 2.75 ”
— 1.82 ”
— 1.95 ”
rev. 08.24.05
7’ 0” X
Tip-to-Tip Length : 7 ’ 0 “
Maximum Thickness: 2.62 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.43 ”---
1.67 ”---
0.48 ”---
1.20 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments: Lowered nose for easier entry and / or lesssteep waves.
5.09 ”---
2.44 ”---
— 2.62 ”
— 1.64 ”
— 1.99 ”
7’ 2” RP
Tip-to-Tip Length : 7 ’ 2 “
Maximum Thickness: 2.63 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.48 ”---
1.89 ”---
0.52 ”---
1.20 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Rounded Point / Mini GunSeries
— 1.80 ”
5.51 ”---
2.25 ”---
— 1.54 ”
— 2.63 ”
rev. 08.24.05
7’ 2” X
Tip-to-Tip Length : 7 ’ 2 “
Maximum Thickness: 2.88 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.53 ”---
1.63 ”---
0.60 ”---
1.55 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments: Extra tail rocker,low entry at nose.
— 1.89 ”
4.62 ”---
2.99 ”---
— 1.72 ”
— 2.88 ”
7’ 4” FN
Tip-to-Tip Length : 7 ’ 4 “
Maximum Thickness: 2.80 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.60 ”---
1.94 ”---
0.53 ”---
1.24 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Fun Shape / Egg Series
— 1.74 ”
5.55 ”---
2.31 ”---
— 1.73 ”
— 2.80 ”
rev. 08.24.05
7’ 4” MG
Tip-to-Tip Length : 7 ’ 4 “
Maximum Thickness: 2.77 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.67 ”---
2.15 ”---
0.45 ”---
1.03 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Mini Gun
— 1.77 ”
5.75 ”---
2.02 ”---
— 1.76 ”
— 2.77 ”
rev. 08.24.05
7’ 6” HY
Tip-to-Tip Length : 7 ’ 6 “
Maximum Thickness: 2.81 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.75 ”---
2.28 ”---
0.58 ”---
1.28 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Hybrid Series
— 1.64 ”
5.95 ”---
2.36 ”---
— 1.70 ”
— 2.81 ”
rev. 08.24.05
7’ 6” N
Tip-to-Tip Length : 7 ’ 6 “
Maximum Thickness: 2.77 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.77 ”---
1.87 ”---
0.49 ”---
1.42 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Mini LongboardFlat sweet spot on bottomfrom mid point to 4.9 inchestowards tail
— 1.60 ”
3.46 ”---
2.95 ”---
— 1.67 ”
— 2.77 ”
rev. 08.24.05
7’ 6” RP
Tip-to-Tip Length : 7 ’ 6 “
Maximum Thickness: 2.63 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.55 ”---
1.96 ”---
0.60 ”---
1.32 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Rounded Point / Mini GunSeries
— 1.84 ”
5.40 ”---
2.35 ”---
— 1.56 ”
— 2.63 ”
rev. 08.24.05
8’ 0” GN
Tip-to-Tip Length : 8 ’ 0 “
Maximum Thickness: 2.92 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.75 ”---
2.21 ”---
0.72 ”---
1.48 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Gun Blank
— 1.82 ”
5.82 ”---
2.61 ”---
— 1.76 ”
— 2.92 ”
0.16 ”---
0.36 ”---
rev. 08.24.05
8’ 0” HY
Tip-to-Tip Length : 8 ‘ 0 “
Maximum Thickness: 2.92 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
0.93 ”---
2.60 ”---
0.68 ”---
1.43 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Hybrid / Gun
— 1.65 ”
6.34 ”---
2.53 ”---
— 1.68 ”
— 2.92 ”
0.19 ”---
0.19 ”---
rev. 08.24.05
8’ 6” PL
Tip-to-Tip Length : 8 ’ 6 “
Maximum Thickness: 2.88 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.05 ”---
2.49 ”---
0.69 ”---
1.63 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Thinner PerformanceLongboard
— 153 ”
5.16 ”---
3.02 ”---
— 1.40 ”
— 2.88 ”
0.17 ”---
0.30 ”---
rev. 08.24.05
8’ 11” X1
Tip-to-Tip Length : 8 ’ 11 “
Maximum Thickness: 3.19 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.31 ”---
2.6 ”---
1.14 ”---
2.46 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:
Wave catcher, forward trim,performance long board. Flatsweet spot on bottom fromcenter, 5 inches towards tail.Extra thick for high-domedeck.
— 1.69 ”
4.13 ”---
4.00 ”---
— 1.88 ”
— 3.19 ”
0.34 ”---
0.47 ”---
9’ 0” GN
Tip-to-Tip Length : 9 ’ 0 “
Maximum Thickness: 3.23 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.63 ”---
3.67 ”---
0.90 ”---
1.66 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Serious GunSpecial pricing due to extranose rocker.
— 1.85 ”
7.75 ”---
2.74 ”---
— 1.72 ”
— 3.23 ”
0.37 ”---
0.52 ”---
rev. 08.24.05
9’ 0” NW
Tip-to-Tip Length : 9 ’ 0 “
Maximum Thickness: 3.05 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.02 ”---
2.15 ”---
0.78 ”---
1.78 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Wider LongboardsFlat sweet spot on bottom from center 6 inches towardtail.
— 1.66 ”
3.87”---
3.45 ”---
— 1.67 ”
— 3.05 ”
0.24 ”---
0.33 ”---
rev. 08.24.05
9’ 6” N
Tip-to-Tip Length : 9 ’ 6 “
Maximum Thickness: 3.18 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.50 ”---
2.73 ”---
1.20 ”---
2.39 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spoton bottom from center 3 inches towards tail.
— 1.72 ”
4.38 ”---
3.99 ”---
— 1.66 ”
— 3.18 ”
0.45 ”---
0.60 ”---
rev. 08.24.05
9’ 6” NW
Tip-to-Tip Length : 9 ’ 0 “
Maximum Thickness: 3.12 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.24 ”---
2.42 ”---
0.98 ”---
2.07 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Wider LongboardsFlat sweet spot on bottomfrom center 6 inches towardstail.
— 1.60 ”
4.12 ”---
3.70 ”---
— 1.54 ”
— 3.12 ”
0.38 ”---
0.49 ”---
rev. 08.24.05
9’ 6” PL
Tip-to-Tip Length : 9 ’ 6 “
Maximum Thickness: 3.24 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.44 ”---
3.00 ”---
0.95 ”---
1.98 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Performance Longboard
— 1.60 ”
5.80 ”---
3.39 ”---
— 1.66 ”
— 3.24 ”
0.30 ”---
0.54 ”---
rev. 08.24.05
10’ 0” NW
Tip-to-Tip Length : 10 ’ 0 “
Maximum Thickness: 3.15 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.35 ”---
2.51 ”---
1.09 ”---
2.13 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:Wider LongboardsFlat sweet spot on bottom from center 6 inches towardstail.
— 1.64 ”
4.12 ”---
3.70 ”---
— 1.62 ”
— 3.15 ”
0.42 ”---
0.07 ”---
0.13 ”---
0.58 ”---
rev. 08.24.05
10’ 6” N
Tip-to-Tip Length : 10 ’ 6 “
Maximum Thickness: 3.29 ”
Please note: All dimensions can bechanged for a customizedpurpose-built blank!
Copyright by sFoam 2004
www.sfoam.com
1.77 ”---
3.03 ”---
1.47 ”---
2.63 ”---
Nose rocker measured at tip.
Tail rocker measured at tip.
Bottom measured at 12 “ from nose, 24 “ from nose and so on; also, 12 “ from tail, 24 “ from tail and so on.
Deck thickness measured at 12 “ from nose, 12 “ from tail and at midpoint.
Comments:LongboardFlat sweet spot on bottom from center 6.44inches towards tail
— 1.61 ”
4.63 ”---
4.21 ”---
— 1.64 ”
— 3.29 ”
0.65 ”---
0.16 ”---
0.28 ”---
0.86 ”---
rev. 08.24.05
Outlines- 12.63 ” -
- 20.87 ” -
- 14.85 ” -
See sFoam Outline catalog for:
www.sfoam.com
End of CatalogPlease check www.sFoam.com
for latest blank styles.
