SV Steckverteilersysteme
Mechanische DatenSchutzart: IP 67 DIN 40 050
im gesteckten und verrastetem Zustand
Temperaturbereich: – 20°C / + 80°C
IndustriebeständigkeitGute Chemikalien- und Oelbeständigkeit.Der Einsatz dieser Steckverbinderserie in aggressiven Medienist im Einzelfall zu überprüfen.
SV Distributors
Mechanical dataProtection: IP 67 DIN 40 050
only in fully locked position
Temperature range: – 20°C / + 80°C
Industrial resistantGood chemicals and resistance.Tests should be made in advance whenusing in an aggressive environment.
SV Steckverteilersysteme M12 / M8 und DUO-VerteilerDistributor for round connectors M12 / M8 and DUO distributors
M 8 – distributor
MaterialsBody: PBTPSnap body: LDPEHousing: PA 6.6 VO acc. to UL 94Famale contacts: CuZn, gal AuFlat packing: CRFounding: Epoxyd-ResinElectrical dataReference voltage: 60 V AC / 75 V DCIsolation group: C acc. to VDE 0110Nominal power: 500 mA per outlet
2 A max. totalCableTyp: LifYY11YNumber of cores: 12Cross section: 0,34 mm2
Number of cores: 65 x 0,07Colours of cores: acc. to DIN 47 100
M 12 – distributor
MaterialsMoulded body/Body: PA 6.6 VO acc. to UL 94Contacts (male): CuZn, gal SnContacts (female): CuZn, gal AuScrew-female: CuZn, gal CRFlat packing: NBRElectrical dataReference voltage: 10 – 30 V DCIsolation group: C acc. to VDE 0110Nominal power: 4,0 A max. per outlet
Plug Connectors for distributor M 12
MaterialsBody: PA 6.6 VO acc. to UL 94Contacts (female): CuZn, gal NiWire section: max. 1,5 mm2
alternative 1,0 mm2 with Cable end-sleeveScrew joint for cable: PG 13,5 (max. Ø 14)Electrical dataNominal power: 4,0 A max.prefer cable type: LiFYY11Y
Technical data DUO distributor
MaterialsBody: PUR
M 8 – PBTBContacts (male): CuZn, gal AuMoulded body: PUR, blackElectrical data without LED with LEDReference voltage: 60 V AC / 75 V DC 10 – 30 V DCNote: By the performance M 12
are the electrical data modifited as follow:250 V AC / 300 V DC
prefer cable type: LiFYY11YNominal power: according to chosen cross section
M 8 – Verteiler
WerkstoffeKontaktträger: PBTPSchnappbund: LDPEGehäuse: PA 6.6 VO nach UL 94Kontaktbuchsen: CuZn, gal AuDichtung: CRVerguß: EpoxydharzElektrische DatenBemessungsspannung: 60 V AC / 75 V DCIsolationsgruppe: C nach VDE 0110Strombelastung: 500 mA pro Steckplatz
2 A max. gesamtKabelTyp: LifYY11YAderanzahl: 12Querschnitt: 0,34 mm2
Aderaufbau: 65 x 0,07Aderfarben: nach DIN 47 100
M 12 – Verteiler
WerkstoffeKontaktträger/Gehäuse: PA 6.6 VO nach UL 94Kontakt (Stift): CuZn, gal SnKontakte (Buchse): CuZn, gal AuGewindebuchse: CuZn, gal CRDichtung: NBRElektrische DatenBemessungsspannung: 10 – 30 V DCIsolationsgruppe: C nach VDE 0110Strombelastung: 4,0 A max. pro Steckplatz
Kupplung für M 12 Verteiler
WerkstoffeKontaktträger: PA 6.6 VO nach UL 94Kontakte (Buchse): CuZn, gal NiAnschlußquerschnitt: max. 1,5 mm2
oder 1,0 mm2 mit AderendhülseKabelverschraubung: PG 13,5 (max. Ø 14)Elektrische DatenStrombelastbarkeit: 4,0 A max.empf. Kabeltypen: LiFYY11Y
Technische Daten DUO Verteiler
WerkstoffeKontaktträger: PUR
M 8 – PBTBKontakt (Stift): CuZn, gal AuGriffkörper: PUR, schwarzElektrische Daten ohne LED mit LEDBemessungsspannung: 60 V AC / 75 V DC 10 – 30 V DCHinweis: bei Ausführung M 12 statt
M 8 Änderung der elektrischen Daten in250 V AC / 300 V DC
empf. Kabeltypen: LiFYY11YStrombelastbarkeit: nach gewählter Querschnittsart
M 8 – Verteiler / M 8 – distributorAusführung Version
Zubehör AccessoiresSchutzkappe für Dust cover fornichtbelegte unused socketsKupplungsgehäuseBezeichnungs-Schild Mark sign
MZSV 10 / 3 – 124 – 2,5 m MZSV 10 / 3 – 124 – 5,0 m
09 7970 01 09 7970 02
09 7199 02 (10 Stück / pos.)
09 7999 92 (10 Stück / pos.)
Schaltbild / circuit diagram
Andere Kabellängen und -typen möglich. Other cablelenghts and types possible.
M 8 – Verteiler / M 8 – distributorAusführung Version
Anschluss links Connection leftAnschluss rechts Connection right
Zubehör AccessoiresSchutzkappe für Dust cover fornichtbelegte unused socketsKupplungsgehäuseBezeichnungs-Schild Mark sign
MZSV 16 / 3
09 7970 1309 7970 14
09 7199 02 (10 Stück / pos.)
09 7999 92 (10 Stück / pos.)
MZSV 16 / 3 – Links / left
Schaltbild / circuit diagram Schaltbild / circuit diagram
MZSV 16 / 3 – Rechts / right
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Kabeltyp Type of cableAußenmantel Outer sheathMantelfarbe Colour of sheathAderzahl Number of coreAderquerschnitt Cross sectionAderaufbau Number and diameter
of individual wiresStrombelastbarkeit Current carrying capacity
Winkelkupplung ohne LED Winkelkupplung mit LEDplug angled without LED plug angled with LED
09 7626 3009 7626 3109 7626 33
09 7626 34 09 7626 5009 7626 35 09 7626 5109 7626 37 09 7626 53
09 7626 38 09 7626 5409 7626 39 09 7626 5509 7626 41 09 7626 57
09 7626 42 09 7626 5809 7626 43 09 7626 5909 7626 45 09 7626 61
LifYY 11 YPVC / PURgrau/grey30,25 mm2
65 x 0,07 mm
max. 3,8 A max. 24 V
DUO-Verteiler M 12 / DUO-distributor M 12Kontaktplan / Wiring diagram
Andere Kabellängen und -typen möglich. Other cablelenghts and types possible.
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Länge „L“ Length „L“ 1,5 m2,5 m5,0 m
Kabeltyp Type of cableAußenmantel Outer sheathMantelfarbe Colour of sheathAderzahl Number of coreAderquerschnitt Cross sectionAderaufbau Number and diameter
of individual wiresStrombelastbarkeit Current carrying capacity
M 8 Kupplungen / M 8 Female plug
09 7626 10 09 7626 1809 7626 11 09 7626 1909 7626 13 09 7626 21
09 7626 14 09 7626 2209 7626 15 09 7626 2309 7626 17 09 7626 25
LifYY 11 YPVC / PURgrau / grey30,25 mm2
65 x 0,07 mm
max. 2,8 A
DUO-Verteiler M 12/M 8 / DUO-distributor M 12/M 8Kontaktplan / Wiring diagram
Andere Kabellängen und -typen möglich. Other cablelenghts and types possible.
7
M 12 Sensor-Verteiler / M 12 sensor boxAusführung Version ZSV 4/4 LED ohne Flansch ZSV 4/4 LED mit Flansch
ZSV 4/4 LED without flange ZSV 4/4 LED with flange
09 7954 00 09 7954 40
M 12 Sensor-Verteiler / M 12 sensor boxAusführung Version ZSV 8/4 LED ohne Flansch ZSV 8/4 LED mit Flansch
ZSV 8/4 LED without flange ZSV 8/4 LED with flange
09 7950 00 09 7950 40
M 12 Aktor-Sensor-Verteiler / M 12 actor-sensor boxAusführung Version ASV 4 LED ohne Flansch ASV 4 LED mit Flansch
ASV 4 LED without flange ASV 4 LED with flange
09 7964 00 09 7964 20
M 12 Aktor-Sensor-Verteiler / M 12 actor-sensor boxAusführung Version ASV 8 LED ohne Flansch ASV 8 LED mit Flansch
ASV 8 LED without flange ASV 8 LED with flange
09 7960 00 09 7960 20
Kupplung für M 12 – Verteiler / Plug connector for M 12 distributorAusführung Version
Zubehör AccessoiresSchutzkappe für Dust cover fornichtbelegte unused socketsKupplungsgehäuseBezeichnungs-Schild Mark sign
18-polig / 18-poles
09 7950 70
09 7999 98 (5 Stück/pieces)
09 7999 99 (10 Stück/pieces)
HaftungsausschlussDisclaimer
Es gelten die „Allgemeinen Lieferbedingun-gen für Erzeugnisse und Leistungen derElektroindustrie“ – ZVEI –. Die angegebenenAbmessungen dienen lediglichReferenzzwecken. Alle früheren Kataloge,die diese Produkte betreffen, werden hiermitgegenstandslos. Diese Unterlage incl.sämtlicher Beilagen darf ohne schriftlicheGenehmigung – auch auszugsweise – nichtvervielfältigt oder verwendet werden(URHG, UWG, BGB). Alle Rechte für denFall der Patenterteilung oder GM-Eintragungvorbehalten. Konstruktionsänderungen ausFertigungsgründen, einer erweitertenAnwendungsmöglichkeit, einer Qualitäts-verbesserung etc. behalten wir uns vor. Zu Ersatzlieferungen älterer Konstruktionensind wir nicht verpflichtet.
The information contained in this catalogueis based on our experience to date and isbelieved to be reliable. It is intended as aguide for use by persons having technicalskill at their own discretion and risk. We donot guarantee favourable results or assumeany liability in connection with its use.Dimensions contained herein are for referen-ce purposes only. This publication is not tobe taken as a license to operate under, or arecommendation to infringe any existingpatents. This supersedes and voids allprevious literature, etc.
02/04
13
Immer die richtige VerbindungAlways the right connection
HoTec ElectronicHollenberg GmbH
Postfach 1170D-49537 Tecklenburg
Wechter Straße14D-49545 Tecklenburg-Brochterbeck
Telefon ++49 (0) 5455 9308 - 0Telefax ++49 (0) 5455 9308 -18Internet www.hotec-electronic.deeMail [email protected]
A1
AKLotte/OS
ASLotteTecklbg.
73
74
ASLaggenbeckTecklenburg 13 72
12
Brochter-beck Tecklen-
burg
ASLengerichTecklenburg
LeddeLeeden
A30