Earthquake Emergency Return (EER) Upon activation of secondary wave seismic sensors, the car stops at the nearest floor, and parks there with the doors open to facilitate safe evacuation of passengers. Fire Emergency Return (FER) On activation the building's fire sensors, all calls are canceled and the car will immediately return to a specified rescue floor and park there with doors open. Energy-Saving Operation Mode To save energy, the elevator is automatically put into sleep mode if there are no calls for 3 minutes. 2-gate model Blowing type Horizontal type Rectangular type Doors with fire-proof windows Remote-controlling sensor to call elevator at hall Electric fan Handrail Mirror Wired glass windows Car Arrival Chime Remote control Additional Management Key Switch For a floor other than the lowest floor Basic code:Japan code (JIS) Only one side opening at each floor Luxury and convenience in your home Home Elevators Standard functions K3F-2CO-2030 Passenger Basement Drum Type 3 persons 200kg Up 20m/min,Down 30m/min VVVF inverter drive Max. 5 stops Max. 13m (2-gate model:Max.10m) Item Specification Deflector Sheave Foundation slab Bottm floor level Overhead : 2,400mm (min.) Travel : 1-gate model 13m (max.) 2-gate model 10m (max.) Pit depth : 1-gate model 550mm (mim.) 2-gate model 750mm (min.) Guide Rails Hall Doors Ropes Car Driving Machine Call Button Top floor level Please note that the above figure shows the minimum required dimensions for elevator installation and do not include dimensional errors in construction work. Installation and Dimensions Specifications of Home-Elevators Car Car Car width : 950mm Car depth : 1,150mm Car depth : 1,180mm Car width : 950mm Shaft depth : 1,350mm (min.) Shaft Shaft Shaft depth : 1,450mm Entrance width : 800mm Shaft width : 1,350mm (min.) Entrance width : 800mm Shaft width : 1,350mm (min.) 1-gate model 2-gate model Elevator shaft dimensions Standard Specifications Optional Specifications Model Use Driving system No. of persons Rated load Rated speed Control system No. of stops Travel Multi-Beam Door Sensor (MBS) Overload Holding Stop (OLH) Mitsubishi Emergency Landing Device (MELD) (In the event of normal power failure,the elevator power of a rechargeable battery moves the car to the nearest floor below.) Management Key Switch Automatic Car Lighting/ Fan(option) Shut-Off Function Emergency Buzzer Button Emergency Car Lighting Extending of door opening time (MAX.3 minutes at both car and hall) Next Landing (NXL) Door Load Detector (DLD) Safe Landing (SFL) Shaft internal dimensions (mm) Door type Electrically operated 4-panel center opening Power supply Drive: Single-phase 200V 3-wired Lighting: Single-phase 100V 2-wired Motor capacity 2.6kW Car internal dimensions (mm) 1-gate model:Width 950 ×Depth 1,150 ×Height 2,000 2-gate model:Width 950 ×Depth 1,180 ×Height 2,000 Entrance dimensions (mm) Width 800 x Height 1,900 1-gate model:Width 1,350 (min.) ×Depth 1,350 (min.) 2-gate model:Width 1,350 (min.) ×Depth 1,450 (min.) Specifications subject to change without notice SVA-M-A MHE0903 Electronic chimes sounds to indicate that a car will soon arrive. New
Transcript
Earthquake Emergency Return(EER)
Upon activation of secondary waveseismic sensors, the car stops at the nearest floor, and parks there with the doors open to facilitate safeevacuation of passengers.
Fire Emergency Return(FER)
On activation the building's fire sensors, all calls are canceled and thecar will immediately return to a specified rescue floor and park therewith doors open.
Energy-Saving OperationMode
To save energy, the elevator is automatically put into sleep modeif there are no calls for 3 minutes.
2-gate model
Blowing typeHorizontal typeRectangular typeDoors with fire-proof windows
Remote-controlling sensor to call elevator at hall
Electric fanHandrailMirrorWired glass windows
Car Arrival Chime
Remote control
Additional ManagementKey Switch For a floor other than the lowest floor
Please note that the above figure shows the minimum required dimensions for elevator installation and do not include dimensional errors in construction work.
ModelUseDriving systemNo. of personsRated loadRated speedControl systemNo. of stopsTravel
Multi-Beam Door Sensor (MBS)Overload Holding Stop (OLH)Mitsubishi Emergency Landing Device (MELD)(In the event of normal power failure,theelevator power of a rechargeable batterymoves the car to the nearest floor below.)Management Key SwitchAutomatic Car Lighting/Fan(option) Shut-Off FunctionEmergency Buzzer ButtonEmergency Car LightingExtending of door opening time(MAX.3 minutes at both car and hall) Next Landing (NXL) Door Load Detector (DLD) Safe Landing (SFL)
Shaft internaldimensions (mm)
Door type Electrically operated 4-panelcenter opening
Power supply Drive: Single-phase 200V 3-wiredLighting: Single-phase 100V 2-wired
Electronic chimes sounds to indicate that a car will soon arrive.
New
Luxury and convenience in your homeMITSUBISHI Home Elevators are a compact yet highly sophisticated, luxurious amenity to enhance convenience at your residence. The elevator comes in an elegant, space-saving design, which perfectly blends with the features of existing architecture. With technology built on our experience and know-how, our Home Elevators help you move between floors comfortably and smoothly. They are a special touch, and can be meaningful, luxurious assets for you.
Space-saving solutions: To eliminate the need for a separate machine room, a "Machine Room-less concept" is adopted, whereby the driving machine is installed inside the shaft, and the control panel is installed inside the Hall-unit of the lowest floor. Furthermore, the overhead dimension and the pit depth have been minimized for the least building construction interface.
�������
�����
Multi-Beam Door Sensor foruser safetyA "Multi-Beam Door Sensor" which prevents users from being caught by closing doors is provided as a standard feature. The sensor consists of as many as 54 infrared light beams, and immediately reverses the closing doors when any of the beam is blocked.
Advantageous 4-panel center-opening doorsOur reliable, state-of-the-art technology has made faster yet extremely smooth and quiet door opening and closing a reality. The space-saving design helps existing architecture look even more elegant and sophisticated.
Energy-saving, economical operations: 50% or more
CUT!Energy-Saving Operation Mode helps reduce the figures on your energy bills. (Energy-saving Operation Mode is option)
�� �� ��
Hall Designs
Car Designs
����� ���（�� ）
����� �����（���）
����� �����（���）
��� ���（���）
����� ���（�� ）����� �����（���）
��� �����（���） ����（���）
���� " ����� �����# ����� $��� ����
��� ����$ " ����� �����# ����� $��� ����
%���$ " ����� �����# ����� $��� ����
������� " ��� ����� �����
&������ " &��'���� ��� (����)
����� " *��������� ��� (����)+
,�������� � �� ���-��� �� ��$����$.
Medium maple（���）Mild oak（���）
Car Operating Panel
Color Samples
Sugar white（�� ）
Walls / Ceiling (coated steel plate)
Doors (coated steel plate)
Flooring (carpet)
*�$���$� ����
/������ ����
��� 0���
���������1�� ����
����$ 2���� /��� 2����$
Door side
Rear side
%��� 2���� 3 %���$ " ���� $��� ���� (��� ���)
4����$ " ���� $����� ���$�$
%��� 2���� 3 %���$ " ���� $��� ���� (����� �����)
4����$ " ���� $����� ���$�$
%��� 2���� 3 %���$ " ���� $��� ���� (����� ���)
4����$ " ���� $����� ���$�$
Call Buttons
%��� /��� ����
%��� /���0���
5���� ������ 0����6���� ����*�$���$� ����
%�$����0���
7�������� 0�''��0���
To enhance usability for every user, especially those who are physically disabled such as wheelchair users, our easy-to-read Car Operating Panel is installed on the side wall at a lower position than before. Your destination can be registered with only a simple touch, and the Response Lamp lights up when your call has been registered.
The Management Key Switch is installed on the lowest floor. This switch can temporarily take the elevator out of service as required, such as when users are on vacation. An additional Management Key Switch can be installed as an option.
