2
newterra.com SVE/AS, 100 ACFM, 34 SCFM, Container Application • Soil vapor extraction and Air sparging applications Equipment Summary • 4-leg vapor extraction manifold • Steel vapor liquid separator w/ manual drain • SVE: High-Flow, Med-Vacuum Rotary lobe blower • SPARGE: Rotary vane compressor • 4-leg sparge manifold • Programmable Logic Controller (PLC) based control panel Construction • Compact design - Installed in a 8’ x 10’ used shipping container • Process piping is galvanized steel and PVC Process Specifications • Rated Vacuum and Flow for Vapor Extraction System: 100 ACFM @ 60 “WC • Rated Pressure and Flow for Air Sparge System: 34 SCFM @ 10 PSIG • Rated Water Process Flow Rate: Optional • Rated Water Discharge Pressure for Downstream Pumping Locations: Optional • Approximate Weight: 6,500 lbs • Approximate Exterior Dimensions: 8’ x 10’ • Acceptable Ambient Temperature: 5 to + 35 ºC (40 to 95 ºF) Power Specifications • Power Requirements: 65 Amps @ 208V 3 Ph • Service Required: 100 Amps @ 208V 3 Ph • Main Disconnect by: newterra • Area Classification of Process Equipment: General Purpose • Area Classification of Control Panel: General Purpose, Outdoors • Electrical Approvals: UL Panel Approval • Telephone Line Requirements: None - Optional wireless telemetry available Standard Features • Lighting, ventilation fan • Framed wall construction • Painted plywood walls, ceiling and floor • Automated PLC control system for independent operation Optional Features • Sound Attenuation Package: Standard and custom options available • Cold weather Package: Heated and insulated for cold environment • Skid Package: Equipment skid mounted only, no enclosure • Mobile Treatment Package: Equipment mounted in mobile, enclosed trailer • Custom Exterior Finishing Available: Siding (vinyl or steel), brick veneer • Remote Access Package: Telemetry hardware with data-logging functions • Customization of manifolds, blower model/HP, compressor model/HP • Additional transmitters and other process instrumentation • Condensate treatment options for collected condensate in separator • Vapor treatment options (heat exchanger may need to be added) • Variable Frequency Drive (VFD) for motors • Hazardous (Class 1 Division 2) Area Classification Design
