Date post: | 03-Sep-2015 |
Category: |
Documents |
Upload: | rohith-kommu |
View: | 42 times |
Download: | 10 times |
Work Category : PC1030100 - CHEMICALS - Drilling Fluid/Workover Chemicals - BaritesModus Operandi : Local Manufcturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title Qualification Experience e.g. Tools e.g. MOF, CIDB
Product expert Degree in any field of Engineering
5 years experience and specialization on drilling activities for Oil and Gas industry
Lab technician Diploma holder3 years experience in handling Barite Quality Test
(Company to also submit relevant supporting documents as stipulated in 'Lampiran E' of 'Panduan Am Lesen dan Pendaftaran PETRONAS')
Work Category : PC1030100 - CHEMICALS - Drilling Fluid/Workover Chemicals - BaritesModus Operandi : Agent
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title Qualification Experience e.g. Tools e.g. MOF, CIDB
Product expert Degree in any field of Engineering
5 years experience and specialization on drilling activities for Oil and Gas industry
Lab technician Diploma holder3 years experience in handling Barite Quality Test
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
1. QAQC manual (including testing procedure as per API 13A) 2. HSE Management System
1. Laboratory Facilities - operational laboratory at any supply base 2. Bulking/Storage Facilities - dockyard/ storage facilities at any supply base
Yes
1. QAQC manual (including testing procedure as per API 13A)2. HSE Management System
N/A N/A
MINIMUM TECHNICAL REQUIREMENT
N/A
KEY PERSONNEL Companys Experience
Major equipments used to conduct Barite Quality test as below: 1. Barite Calibration Test Materials2. Oven 3. Balance
Provide List of Experience
1. Laboratory Facilities - operational laboratory at any supply base2. Bulking/Storage Facilities - dockyard/ storage facilities at any supply base
Major equipments used to conduct Barite Quality test as below:1. Barite Calibration Test Materials2. Oven 3. Balance
Provide List of Experience
Work Category : PC1030700, PC1030800, PC1031000, PC1040200, PC1040300, PC1040500Description : To manufacture, supply and provision of associated services for Common Chemicals Sector Application : Upstream/DownstreamModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title Qualification Experience e.g. Tools e.g. MOF, CIDB
Chemist Min Degree in Chemistry/Applied
Chemistry/ Industrial Chemistry
Minimum of 5 years
experience and
specialisation in Oil & Gas
industry and Specialty
Chemical Analytical Testing.
Field Engineer Degree in any field of engineering
Minimum of 2 years
experience and
specialisation in Oil & Gas
field Chemical application.
Technician Diploma in any field of engineering
Minimum of 2 years
experience in Oil & Gas
industry and Specialty
Chemical Analytical Testing.
Technical Advisor Min Degree in Chemistry/ Applied
Chemistry /Industrial Chemistry
Minimum of 7 years
experience and
specialisation in Oil & Gas
industry and Specialty
Chemical Analytical Testing.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Blending Plant in Malaysia
Operational Laboratory in Malaysia
Warehouse with stacking in Malaysia
Decanting Facilities in Malaysia
1. Blending Plant: Minimum 2 units of Blending Unit with minimum capacity of 2000L each. (2X2000L)
2. Operational Laboratory: Major equipments used to conduct product quality test i.e. Density, Viscosity, pH and etc.
Min of 3 years in manufacturing and supplying production integrity and/or water injection chemicals used in the Oil & Gas industry.
DOSH-Permit to operate as Chemical Manufacturer
Business License from local authority
N/A
Min ISO9001
ISO14000
HSE Management System
QA/QC Procedures(Compliance to min ISO 9001)
Work Category : PC1040100, PC1040400, PC1040700, PC1040800, PC1040900, PC1041000Description : To manufacture, supply and provision of associated services for Engineered Chemicals Sector Application : Upstream/DownstreamModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title Qualification Experience e.g. Tools e.g. MOF, CIDB
Chemist (Permanent
/Fulltime)
Min Degree in Chemistry/Applied
Chemistry/Industrial Chemistry
Minimum of 7 years experience
and specialisation in Oil & Gas
industry and Specialty Chemical
Analytical Testing.
Field Engineer Degree in any field of engineering
Minimum of 5 years experience
and specialisation in Oil & Gas
Field Chemical application.
Technician Diploma in any field of engineering
Minimum 3 years experience in
Oil & Gas industry and Specialty
Chemical Analytical Testing.
Technical Advisor Min Degree in Chemistry/Applied
Chemistry/Industrial Chemistry
Minimum of 10 years
experience and specialisation in
Oil & Gas industry and Specialty
Chemical Analytical Testing.
Min ISO 9001
ISO14000
HSE Management System
QA/QC Procedures(Compliance to min ISO 9001)
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Blending Plant in Malaysia
Operational Laboratory in Malaysia
R&D Laboratory within South East Asia region (Malaysia, Thailand, Singapore, Indonesia & Philippine)
Warehouse with stacking in Malaysia
Decanting Facilities in Malaysia
1. Blending Plant: Minimum 2 units of Blending unit with minimum capacity of 2000L each. (2X2000L)
2. Operational Laboratory: Major equipments used to conduct product quality test i.e. Density, Viscosity, pH, Water Analysis and etc.
3. R&D Laboratory: Basic apparatus /equipment for conducting bottle test and compatibility test e.g. centrifuge, thermometer, glassware, ovenEquipment or facility for corrosion testing e.g. AutoclaveEquipment for Bench Scale testing e.g. Tube Blocking testSophisticated equipment such as *FTIR, **GC
4. Software: Prediction Software i.e. Scale , Corrosion, Wax, Hydrate.
Min of 7 years in
manufacturing and
supplying production,
integrity and/or water
injection chemicals
used in the Oil and Gas
industry worldwide.
Note: Principals
partner/parent
experience can only be
considered either for:
JV companies
Subsidiaries
Companies licensed to
manufacture & service
through technical
alliance arrangement
DOSH-Permit to operate as Chemical Manufacturer
Business License from Local Authority
N/A
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater anchoring system
7 years of experience in supply and design of deepwater anchoring system
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of anchoring system (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
2 years experience in supplying anchoring system
Proper office setup N/A
Company to provide the list of experience in supply and design of anchoring system (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater anchoring system
7 years of experience in supply and design of deepwater anchoring system
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of anchoring system (Company to provide list of experiences)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
: PM1050901 - Mechanical -Marine Systems - Deepwater - Anchor: Supply and design of deepwater anchoring system
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater buoys system
7 years of experience in supply and design of deepwater buoys system
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of bouys system (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
2 years experience in supplying buoys system
Proper office setup N/A
Company to provide the list of experience in supply and design of bouys system (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater buoys system
7 years of experience in supply and design of deepwater buoys system
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of bouys system (Company to provide list of experiences)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
KEY PERSONNEL Companys Experience
: PM1050902 - Mechanical -Marine Systems - Deepwater - Buoy: Supply and design of deepwater buoys system
MINIMUM TECHNICAL REQUIREMENT
Work Category : PM1050903 - Mechanical -Marine Systems - Deepwater - Single Point MooringWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/Structural/ Riser Engineering / Pipeline Engineering / Naval Architecture / Marine Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/Structural/ Riser Engineering / Pipeline Engineering / Naval Architecture / Marine Engineering
5 years of experience in supply and design of deepwater single point mooring system / turret
7 years of experience in supply and design of deepwater single point mooring system / turret
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of single point mooring system / turret (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/Structural/ Riser Engineering / Pipeline Engineering / Naval Architecture / Marine Engineering
2 years experience in supplying single point mooring system / turret
Proper office setup N/A
Company to provide the list of experience in supply and design of single point mooring system / turret (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
: Supply and design of deepwater single point mooring/ turret
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/Structural/ Riser Engineering / Pipeline Engineering / Naval Architecture / Marine Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/Structural/ Riser Engineering / Pipeline Engineering / Naval Architecture / Marine Engineering
5 years of experience in supply and design of deepwater single point mooring system / turret
7 years of experience in supply and design of deepwater single point mooring system / turret
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of single point mooring system / turret
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Work Category : PM1050904 - Mechanical -Marine Systems - Deepwater - Mooring LineWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater mooring line
7 years of experience in supply and design of deepwater mooring line
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of mooring line (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
2 years experience in supplying mooring line Proper office setup N/A
Company to provide the list of experience in supply and design of mooring line (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
: Supply and design of deepwater mooring line i.e: wire rope, chain, polyester rope, connectors, fairlead and mooring jack etc
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Mechanical Engineering/ Marine Engineering/Naval Architecture/ Structural/ Riser Engineering / Pipeline Engineering
5 years of experience in supply and design of deepwater mooring line
7 years of experience in supply and design of deepwater mooring line
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of Mooring line (Company to provide list of experiences)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
REVISED MINIMUM TECHNICAL REQUIREMENT
Principal/Local Agent/Manufacturer/P
ackagerPersonnel & Experience Technical External Bodies Registration/Exclusivity Quality
ROTATING EQUIPMENTCompressors
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Liquid Ring Compressor
Mode of OperationSecondary Code Tertiary Code Descriptions
PR1010700
Minimum Requirements
Agent
PR101
01.1 Centrifugal Compressor Agent
01.2 Reciprocating Compressor
01.8
Agent
Primary Code New SWECs Code
Air Compressor
PR1010100
PR1010200
PR1010400Rotary/Screw Compressor
AgentPR1010800
01.4 Agent
01.7
Principal/Local Agent/Manufacturer/P
ackagerPersonnel & Experience Technical External Bodies Registration/Exclusivity Quality
Mode of OperationSecondary Code Tertiary Code Descriptions
Minimum Requirements
PR1
Primary Code New SWECs Code
GeneratorsLocal Agent Local engineer with
engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Packager Local Packager Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Assembling Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
PrimemoverLocal Agent Local engineer with
engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Agent
0303.1 Gas Turbine Agent
03.2 Steam Turbine PR1030200
Agent
02.6 Micro Turbine Generator
0202.4 Portable Generator Set Agent
02.5
PR1030100
PR1020400
PR1020500
PR1020600
Agent
Skid Mounted Generator
Principal/Local Agent/Manufacturer/P
ackagerPersonnel & Experience Technical External Bodies Registration/Exclusivity Quality
Mode of OperationSecondary Code Tertiary Code Descriptions
Minimum Requirements
PR1
Primary Code New SWECs Code
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Local Agent Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Office premise Exclusive appointment from principal (with product
training program)
HSE Management System
Principal N/A Manufacturing Facilities complete with equipment
or machineries
N/A Compliance to international standard (eg: API/PTS etc)
Manufacturer Local manufacturer Local engineer with engineering certification (3 yrs in oil & gas/5 yrs in any
industry)
Local Manufacturing Facilities complete with
equipment or machineries
Manufacturing Licence (from local authority)
Compliance to international standard (eg:
API/PTS/SIRIM etc) HSE Management System
Agent03.5 Internal Combustion Engine PR1030500
03.6 Turbo Expander PR1030600 Agent
Work Category : PR2010000 - Riser/ Flowlines - FlexibleWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager / Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
5 years of experience in supply and design of flexible pipeline/ riser/ flowline
7 years of experience in supply and design of flexible pipeline/ riser/ flowline
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of flexible pipeline/ riser/ flowline (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
2 years experience in supply and design of flexible pipeline/ riser/ flowline
Proper office setup N/A
Company to provide the list of experience in supply and design of flexible pipeline/ riser/ flowline (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
Project Manager / Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
5 years of experience in supply and design of flexible pipeline/ riser/ flowline
7 years of experience in supply and design of flexible pipeline/ riser/ flowline
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of flexible pipeline/ riser/ flowline (Company to provide list of experiences)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
: Supply of flexible pipeline/ riser/ flowline, ancillaries and spare parts, proprietary items, qualified personnels, repair and refurbishment equipment including provision of engineering
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work Category : PR2020000 - Riser/ Flowlines - RiserWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager / Lead / Senior Engineer
1
Master in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
Or
B.Eng/ Diploma in any relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
5 years of experience in supply and design of top tension riser system, hybrid riser system and riser components
7 years of experience in supply and design of top tension riser system, hybrid riser system and riser components
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
Company to provide the list of experience in supply and design of top tension riser system, hybrid riser system and riser components (if any)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
Modus Operandi : Agent
Any position 1
B.Eng/ Diploma in relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
2 years experience in supply and design of top tension riser system, hybrid riser system and riser components
Proper office setup N/A
Company to provide the list of experience in supply and design of top tension riser system, hybrid riser system and riser components(if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
** For Agent, the principal must comply to below requirements
Principal Requirements
Project Manager / Lead / Senior Engineer
1
Master in relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
Or
B.Eng/ Diploma in relevent engineering discipline, preferably Riser Engineering / Pipeline Engineering/ Mechanical Engineering/ Marine Engineering/ Structural/Naval Architecture
5 years of experience in supply and design of top tension riser system, hybrid riser system and riser components
7 years of experience in supply and design of top tension riser system, hybrid riser system and riser components
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
N/A
At least 5 years experience in supply and design of top tension riser system/ hybrid riser system/ riser components (Company to provide list of experiences)
N/A N/A
*company to provide quality certification if any (E.g. ISO/ DNV / API / ABS Standard)
: Supply of top tension riser system/ hybrid riser system / riser components but not limited to flex joint, stress joint, bouyancy system, connectors, fairings / strake and spare parts,
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project/ Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea wellhead and xmas tree design
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment
Company to provide the list of experience in supply of subsea wellhead and xmas tree in accordance to ISO13628 / API 17(if any)
N/A N/A*company to
provide quality certification if any (E.g. ISO 9001)
: PS3010100 - Subsea - Subsea Hardware - Subsea Wellhead & Tree: Supply of subsea wellhead & xmas tree/installation & workover control system (IWOCS), wellhead equipments, running tools, consumables and spare parts, proprietary items,
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project / Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineeringdiscipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea Production Control System (SPCS) and/or installation & workover control system (IWOCS) design
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment
Company to provide the list of experience in Subsea Production Control System (SPCS) in accordance to ISO13628 / API 17 (if any)
N/A N/A*company to
provide quality certification if any (E.g. ISO 9001)
: PS3010200 - Subsea- Subsea Hardware - Subsea Production Control System : Supply of subsea production control system (SPCS) ,running tools, consumables and spare parts, proprietary items, qualified personnels, repair and refurbishment equipment
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project / Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea hardware design
Modus Operandi
Any position 1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
5 years experience in offshore oil and gas with a minimum 2 years of experience in Subsea engineering
Proper office setupCompany to provide the list of experience in oil and gas (if any)
N/A Yes*company to
provide quality certification if any (E.g. ISO 9001)
** For Agent, the principal must comply to below requirements
Principal Requirements
Project / Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea hardware design
At least 7 years experience in supply of subsea hardware in accordance to ISO13628 / API 17 *company to provide list of experience in supply of subsea hardware
N/A N/A*company to
provide quality certification if any (E.g. ISO 9001)
*company to provide quality
certification if any (E.g. ISO 9001)
: Agent
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment* The company to provide the list
: PS3010300 - Subsea - Subsea Hardware - Subsea Structure, Foundation, Piping and Connection Systems: Supply of subsea piping, connection, structure and foundation e.g. manifold, PLET, PLEM, SLED, rigid jumper, running tools, consumables and spare parts, proprietary items,
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment
Company to provide the list of experience in subsea hardware in accordance to ISO13628 / API 17 (if any)
N/A N/A
Work CategoryWork DescriptionModus Operandi Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project /Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 3 years of experience in subsea boosting/compression/separation system design
Modus Operandi
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Any position 1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
5 years experience in offshore oil and gas with a minimum 2 years of experience in Subsea engineering
Proper office setup N/A*Company to provide the list of experience in oil and gas (if any)
N/A Yes*company to
provide quality certification if any (E.g. ISO 9001)
** For Agent, the principal must comply to below requirements
KEY PERSONNEL Companys Experience
: Agent
MINIMUM TECHNICAL REQUIREMENT
*company to provide quality
certification if any (E.g. ISO 9001)
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
Test Facilities Specification & Equipment
At least 3 years experience in supply of Subsea boosting /compression / separation system in accordance to ISO13628 / API 17 *company to provide list of experience in supply of Subsea boosting /compression / separation system
N/A N/A
: PS3010400 - Subsea- Subsea Hardware - Subsea Boosting, Compression & Separation System: Supply of subsea boosting/compression/separation system, running tools, consumables and spare parts, proprietary items, qualified personnels, repair and refurbishment
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Principal Requirements
Project /Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 3 years of experience in subsea boosting/compression/separation system design
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
Test Facilities Specification & Equipment
At least 3 years experience in supply of Subsea boosting /compression / separation system in accordance to ISO13628 / API 17 *company to provide list of experience in supply of Subsea boosting /compression / separation system
N/A N/A*company to
provide quality certification if any (E.g. ISO 9001)
Work CategoryWork DescriptionModus Operandi : Manufacturer
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project / Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
8 years experience in offshore oil and gas design engineering with a minimum 3 years of experience in Subsea metering design
Modus Operandi
Any position 1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
5 years experience in offshore oil and gas with a minimum 2 years of experience in Subsea engineering
Proper office setup N/A*Company to provide the list of experience in oil and gas (if any)
N/A Yes
*company to provide quality
certification if any (E.g. ISO 9001)
** For Agent, the principal must comply to below requirements
Principal Requirements
Project / Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
8 years experience in offshore oil and gas design engineering with a minimum 3 years of experience in Subsea metering design
Test Facilities Specification & Equipment* The company to provide the list
At least 3 years experience in supply of Subsea metering in accordance to ISO13628 / API 17 *company to provide list of experience in supply of Subsea metering
N/A N/A
*company to provide quality
certification if any (E.g. ISO 9001)
*company to provide quality
certification if any (E.g. ISO 9001)
: Agent
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
: PS3010500 - Subsea- Subsea Hardware - Subsea Metering: Supply of subsea metering (single- or multi-phase), running tools, consumables and spare parts, proprietary items, qualified personnels, repair and refurbishment equipment
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Proper office setup, Manufacturing Plant, Storage and Test Facilities.
Test Facilities Specification & Equipment
Company to provide the list of experience in Subsea metering in accordance to ISO13628 / API 17 (if any)
N/A N/A
Work CategoryWork DescriptionModus Operandi
Facilities Equipment/ Machineries
External Body Exclusivity for Quality
E.g. Warehouse, Dockyard
(Owned) Registration Representative e.g. ISO, API Standard
Position Title
Min no of Key
Personnel
Qualification Experience e.g. Tools e.g. MOF, CIDB
Project/ Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea umbilical design
Modus Operandi
Any position 1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
5 years experience in offshore oil and gas with a minimum 2 years of experience in Subsea engineering
Proper office setup N/ACompany to provide the list of experience in oil and gas (if any)
N/A Yes
*company to provide quality certification if any (E.g. ISO 9001)
** For Agent, the principal must comply to below requirements
Project/ Technical Manager
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
15 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea engineering
Lead / Senior Engineer
1
B.Eng/ Diploma in any related engineering discipline, preferably Mechanical Engineering/ Structural/ Piping/ Manufacturing Engineering
10 years experience in offshore oil and gas design engineering with a minimum 5 years of experience in Subsea umbilical design
Principal Requirements
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment* The company to provide the list
At least 7 years experience in supply of subsea umbilical in accordance to ISO13628 / API 17 *company to provide list of experience in supply of subsea umbilical
N/A N/A
*company to provide quality
certification if any (E.g. ISO 9001)
: Agent
Proper office setup, Manufacturing Plant, Storage , Loadout and Test Facilities.
Test Facilities Specification & Equipment
Company to provide the list of experience in supply of subsea umbilical in accordance to ISO13628 / API 17(if any)
N/A N/A*company to
provide quality certification if any (E.g. ISO 9001)
: PS3020000 - Subsea - Umbilical: Supply of subsea umbilical ( steel tube and/or thermoplastic hose) for static & dynamic services, umbilical accessories, proprietary items, qualified personnels, repair and : Manufacturer
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys
Experience
Work Category Description New SWECs Code Mode of Operation Minimum Requirements
2nd Level 3rd Level Personnel & Experience TechnicalExternal Bodies
Registration
Quality e.g. Procedure of ISO, Standard
of APIDegree in Civil
Eng/Building/Other Construction related
courses (3 years)
Company's experience in building construction (3 years)
Diploma in Civil Eng/Building/Other
Construction related courses (5 years)Certificate in Civil
Eng/Building/Other Construction related courses (10 years)
Degree in Civil Eng/Building/Construction/
Project Management (3 years)
Company's experience in service station construction (5
years)
CIDB B02 or B04; Grade G3
& above
Diploma in Civil Eng/Building/Construction/
Project Management (5 years)
and
Certificate in Civil Eng/Building/Construction/Project Management (10
years)
CIDB M12; Grade G3 &
above
Degree in Civil Eng/Building/Construction/
Project Management (3 years)
Company's experience in service station construction (5
years)
CIDB B02 or B04; Grade G3
& above
Diploma in Civil Eng/Building/Construction/
Project Management (5 years)
and
Certificate in Civil Eng/Building/Construction/Project Management (10
years)
CIDB M12; Grade G3 &
above
SC2 - CIVIL, STRUCTURAL & BUILDING MAINTENANCE SERVICES
Structure Construction & Maintenance
Building & Structure Construction
Self Operated HSE Management
System
SC2030500 CIDB B01/B02/ B04/CE24; Grade G3 &
aboveRelevant equipments
SC2160100Service Station
Service Station Service Station Maintenance & Upgrading Works
SC2160200
Service Station Construction
HSE Management
System
Self Operated
Related equipments
Self Operated
Related equipments
Work Category Description New SWECs Code Mode of Operation Minimum Requirements
2nd Level 3rd Level Personnel & Experience TechnicalExternal Bodies
Registration
Quality e.g. Procedure of ISO, Standard
of APIDiploma in Civil Eng/Other
Construction related courses (3 years)
Company's experience in
drainage & sewerage (3 years)
Certificate in Civil Eng/Other Construction
related courses (5 years)SPM (10 years)
Degree in Civil Eng/Other Construction related
courses (3 years)
Company's experience in railway
tracks (3 years)
Diploma in Civil Eng/Other Construction related
courses (5 years)Certificate in Civil
Eng/Other Construction related courses (10 years)
Degree in Civil Eng/Other Construction related
courses (3 years)
Company's experience in marine
structure works (3 years)
Diploma in Civil Eng/Other Construction related
courses (5 years)Certificate in Civil
Eng/Other Construction related courses (10 years)Degree in Civil Eng/Other
Construction related courses (3 years)
Company's experience in reclamation &
dredging (3 years)Diploma in Civil Eng/Other
Construction related courses (5 years)Certificate in Civil
Eng/Other Construction related courses (10 years)
Drainage & Sewerage Construction & Maintenance
Structure Construction & Maintenance
Self Operated
Reclaimation & Dredging Works Self Operated CIDB CE06 or CE18; Grade G3
& above
Related equipments
SC2120000
SC2030400Onshore Marine Structure Construction & Maintenance
Structure Construction & Maintenance
Railway Tracks Construction & Maintenance
Self Operated CIDB CE07; Grade G3 &
above
Related equipments
SC2030300
Related equipments
SC2030200Structure Construction & Maintenance
HSE Management
System
CIDB CE03; Grade G3 &
above
Related equipments
Self Operated CIDB CE19; Grade G3 &
above
Work Category : SE2010100 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Conceptual Engineering Design/FEED
Work DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit two (2)CVs Degree in Engineering
Min twelve (12) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit two (2) CVs for each discipline:
1. Process2. Mechanical / Piping3. Electrical4. Civil & Structural5. Control & Instrumentation6. Pipeline
One of two shall be permanent staff ,One of two shall be Professional Engineer (PE) for each discipline
Company to submit two (2) CVs for each discipline:
1. Process2. Mechanical / Piping3. Electrical4. Civil & Structural5. Control & Instrumentation 6. Pipeline
One of two shall be permanent staff for each discipline
(Company to provide license agreements of the software)
(Company to attach CV of each personnel and PE certification and organization chart)
Degree in Engineering of respective discipline
Min ten (10) years of respective discipline experience in managing similar scope of services
1.Process Simulation and Analysis: HYSIS and PIPESIM or equivalent of the respective
2.Pressure Vessel and Exchanger Design & Analysis: PV ELITE or equivalent
3.Pipe Stress Analysis and Design: CEASAR or equivalent
4.Power System Design and Analysis: EDSA or equivalent (ETAP/SKM)
5.Structural Analysis and Drafting: SACS and BOCAD or equivalent of the respective
6.Instrument design and database: InstruCALC and INTOOLS or equivalent of the respective
7.Pipeline design, analysis and simulation: CEASER 2 and AGA or equivalent of the respective
8.CAD: PDMS & AutoCAD Senior EngineersDegree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
: The Conceptual Engineering Design stage involves the development of Design Basis Memorandum (DBM) for the execution of Detail Engineering Design work to firm up process scheme and Project Execution Plan (PEP). Sample of deliverables are Concept Layouts, HSSE Philosophies, Process Flow Diagram, Simulation Report and etc. The FEED (Front End Engineering Design) stage involves the Development of Design Basis Memorandum with more detail engineering deliverables, Project Specification i.e. Data Sheets and Project Execution Plan. Sample of deliverables are Control , Strategy and System Overview Sketches, HSE plan, P&IDs, Weight Management etc.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Cumulated 125,000 man-hours or more in Conceptual Engineering or FEED in the Oil & Gas industry in the past 5 years.
(Company to provide list of experience and manhours related to conceptual engineering /FEED study)
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / Procedure
Lead Engineers
Work Category : SE2010200 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Detailed Design
Work DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit two (2) CVs Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
One of two shall be permanent staff , One of two shall be Professional Engineer (PE) for each discipline
Company to submit two (2) CVs for each discipline:
1. Process2. Mechanical / Piping3. Electrical4. Civil & Structural5. Control & Instrumentation 6. Pipeline
One of two shall be permanent staff for each discipline
(Company to provide license agreements of the software)
(Company to attach CV of each personnel and PE certification and organization chart)
Company to submit two (2) CVs for each discipline: 1. Process2. Mechanical / Piping3. Electrical4. Civil & Structural5. Control & Instrumentation6. Pipeline
Degree in Engineering of respective discipline
Min ten (10) years of respective discipline experience in managing similar scope of services
1. Process Simulation and Analysis: HYSIS and PIPESIM or equivalent of the respective
2. Pressure Vessel and Exchanger Design & Analysis: PV ELITE or equivalent
3. Pipe Stress Analysis and Design: CEASAR or equivalent
4. Power System Design and Analysis: EDSA or equivalent (ETAP/SKM)
5. Structural Analysis and Drafting: SACS and BOCAD or equivalent of the respective
6. Instrument design and database: InstruCALC and INTOOLS or equivalent of the respective
7. Pipeline design, analysis and simulation: CEASER 2 and AGA or equivalent of the respective
8. CAD: PDMS & AutoCADSenior Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
: The Detailed Engineering Design shall primarily covered the activities for completeness of the engineering deliverables to be used for Procurement, Fabrication, Installation, Commissioning and Start-Up the facilities.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Cumulated at minimum 500,000 man-hours or more in Design and Engineering works in the Oil & Gas industry in the past 5 years. Of that 500,000 man hours, it shall include a single project of 200,000 manhours.
(Company to provide list of experience and manhours related to conceptual engineering /FEED/Detail Design)
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / Procedure
Lead Engineers
Work Category : SE2010301 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - ElectricalWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Power System Design and Analysis : EDSA or equivalent (ETAP/SKM)
1.ElectricalOne shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline: 1.ElectricalOne of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
(Company to provide license agreements of the software)
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
Work Category : SE2010302 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - PipelineWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Pipeline design, analysis and simulation : CEASER 2 and AGA or equivalent of the respective
1. PipelineOne shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline: 1.PipelineOne of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
(Company to provide license agreements of the software)
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
Work Category : SE2010303 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - Civil & StructuralWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Structural Analysis and Drafting : SACS and BOCAD or equivalent of the respective
1.Civil & StructuralOne shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline: 1.Civil & StructuralOne of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
(Company to provide license agreements of the software)
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
Work Category : SE2010304 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - Mechanical & PipingWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Pressure Vessel and Exchanger Design & Analysis : PV ELITE or equivalent
1.Mechanical / PipingOne shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline:
(Company to provide license agreements of thesoftware)
1.Mechanical / PipingOne of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
2.Pipe Stress Analysis and Design : CEASAR or equivalent
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
Work Category : SE2010305 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - ProcessWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Process Simulation and Analysis : HYSIS and PIPESIM or equivalent of the respective
1.ProcessOne shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline: 1.ProcessOne of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
(Company to provide license agreements of thesoftware)
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
Work Category : SE2010306 - ENG. DESIGN, ARCH. & DRAUGHTING SERVICES -Engineering Design- Specific Engineering - Control & InstrumentationWork DescriptionModus Operandi : Self-Operated
Facilities Equipment/ Machineries External Body Exclusivity for QualityE.g. Warehouse,
Dockyard(Owned) Registration Representative e.g. ISO, API Standard
Position Title Min no of Key Personnel Qualification Experience e.g. Tools e.g. MOF, CIDB
Project Manager
Company to submit one (1)CV Degree in Engineering
Min ten (10) years experience in managing similar scope of services
Company to have existing Engineering software (leased or owned) and qualified operator of following as minimum:
Company to submit one (1) CV for key discipline:
1.Instrument design and database : InstruCALC and INTOOLS or equivalent of the respective
1.Control & Instrumentation
One shall be permanent staff and Professional Engineer (PE) Company to submit two (2) CVs for key discipline: 1.Control & Instrumentation
One of two shall be permanent staff
(Company to attach CV of each personnel and PE certification and organization chart)
: Specific Engineering Services scope is to undertake small scale projects, e.g. specific platform/plant modification, retrofitting, rejuvenation engineering for the various disciplines.
MINIMUM TECHNICAL REQUIREMENTKEY PERSONNEL Companys Experience
Company to provide engineering experience in the Oil & Gas industry in the past four (4) years.
Valid registration with BEM (Board of Engineers Malaysia)
N/A Established QA / QC Manual / ProcedureLead Engineers
Degree in Engineering of respective discipline
Min seven (7) years of respective discipline experience in managing similar scope of services
(Company to provide license agreements of the software)
Senior Engineers
Degree in Engineering of respective discipline
Min five (5) years of respective discipline experience in managing similar scope of services
2nd Level 3rd Level 4th LevelPrincipal/Local
Agent/Manufacturer/Packager
Technical External Bodies Registration/ExclusivityQuality e.g. Procedure of
ISO, Standard of API
Provide list of related laboratory equipment
Provide list of related laboratory equipment
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
N/A
Provide computers (DOS, Unix, Linux,
Oracle, web-access) and appropriate software.
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
Provide computers (DOS, Unix, Linux,
Oracle, web-access) and appropriate software.
Office with adequate IT facilities.
N/A
Self - Operated - Bsc Geoscience with 5 years
relevant experience.
Business Development Manager, preferably with Bsc Geoscience/
Petroleum Eng/Geology, with upstream experience.
Principal Geochemist. Experiences in
software development and/or
deployment. Experience related
to modeling system/software-geochemistry & basin modeling.
PhD in Geochemistry
Self - Operated - BSc in Geoscience with
at least 5 yrs relevant
experience.
Business Development Manager, preferably with Bsc
Geoscience/Petroleum Eng/Geology, with upstream experience.
Principal Structural Geologist.
Experienced in development and/or
deployment of structural modeling software. Preferably
experienced in combined IT and oil
industry Experience related
to modeling system/software for structural geology
PhD in Structural Geology.
N/A
- BSc in Chemistry/
Geoscience with 5 yrs
Local Agent Business Development Manager, preferably with Bsc
Geoscience/Petroleum Eng, with upstream experience.
Office with adequate IT facilities.
N/A
SG1020000 Agent
Self - Operated
N/A
Principal 2 permanent various discipline
(Geochemist/ chemical
engineer/petroleum engineer/chemist) Experiences in
geochemistry/PVT laboratory and oil-
industry related experience within
one specific discipline.
PhD in Geochemistry/
chemical eng/petroleum eng/chemistry.
Geochemistry / PVT laboratory,
Geochemistry/Reservoir fluid laboratory & sample
storage area
Laboratory ( at least can provide 3 types of
analysis)
Office Premise/PC /Office Facilities
Exclusive appointment from principal
Business Development Manager, preferably with Bsc Geoscience /
Petroleum Eng, with upstream oil & gas experience.
Office Premise/PC /Office Facilities
Exclusive appointment from principal
HSE Management System
SG1010000 Agent Local Agent
Principal 3 permanent various discipline
(Structural Geologist/ geochemist/ petrophysical
engineer/ biostratographer/ sedimentologist).
Hands on experiences in
related discipline. Experience related
to rock sample analysis.
PhD in Structural Geology/
Geochemistry/ Rock Property/ Biostratigraphy/ Sedimentology.
Self - Operated - Bsc Geoscience with 5 years
relevant experience.
New SWECs Code Mode of Operation
Minimum Requirements
Personnel & Experience
N/A
N/A QHSE or equiv. (eg ISO 9001)
Rock Sample Analysis
Fluid Sample Analysis
SG1030100 Agent
SG1030200 Agent
Modeling System/Software
Modeling System/Software
SG1 - GEOLOGICAL & RESERVOIR
Work Category Description
Modeling System/Software - Structural Geology
Modeling System/Software - Geochemistry & Basin
QHSE or equiv. (eg ISO 9001)
HSE Management System
HSE Management System
N/A
HSE Management System
2nd Level 3rd Level 4th LevelPrincipal/Local
Agent/Manufacturer/Packager
Technical External Bodies Registration/ExclusivityQuality e.g. Procedure of
ISO, Standard of APINew SWECs Code Mode of Operation
Minimum Requirements
Personnel & Experience
SG1 - GEOLOGICAL & RESERVOIR
Work Category Description
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
N/A
Provide computers (DOS, Unix, Linux,
Oracle, web-access) and appropriate software.
Office with adequate IT facilities.
N/A
Self - Operated -
SG1030300 Agent Business Development Manager, preferably with Bsc
Geoscience/Petroleum Eng/Geology, with upstream experience.
Principal Petrophysical Engineer Degree in Geology or Laboratory
services At least 5 years experience in
laboratory tests dealing with full bore cores and plugs.
Consultancy for planning and execution of core analyses
programme.
Modeling System/Software Modeling System/Software - Core Analysis
HSE Management System
2nd Level 3rd Level 4th LevelPrincipal/Local
Agent/Manufacturer/Packager
Technical External Bodies Registration/ExclusivityQuality e.g. Procedure of
ISO, Standard of APINew SWECs Code Mode of Operation
Minimum Requirements
Personnel & Experience
SG1 - GEOLOGICAL & RESERVOIR
Work Category Description
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
ISO-certified /equivalent
Provide computers (DOS, Unix, Linux,
Oracle, web-access) and appropiate software.
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
Principal PhD in Structural Geology/
Geochemistry/ Rock Property/ Biostratigraphy/ Sedimentology
QHSE
Self - Operated - Bsc Geology /Geophysics with 5 years
relevant experience.
HSE Management System
Warehouse facilities for packaging, and/or re-sampling if required.
Packing materials.
Warehouse facilities for packaging, and/or re-sampling if required.
Packing materials.
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/A
Provide computers (DOS, Unix, Linux,
Oracle, web-access).State of the art software to inpterpret and analyse
data.
Local Agent Office Premise/PC /Office Facilities
Exclusive appointment from principal
N/ASG1060200
SG1060100 Agent Business Development Manager, preferably with Bsc Geoscience/
Petroleum Eng/Geology, with upstream experience/business.
Principal Structural Geologist
Experience in interpretation/ analysis and
modeling.Preferably
experienced in combined IT and oil-
industry. Experienced in data
handling & interpretation
Structural Geology/Geomechan
ics.
PhD in Structural Geologist
Self - Operated
SG1050100 Self - Operated -
SG1050200 Self - Operated -
- BSc in Geoscience with
5 yrs relevant
Agent
N/A
Petroleum Engineer/Chemist/Chemical Engineer.
BSc in Petroleum Engineering/Chemistry/Chemical
Engineering Staff must be trained in full
compliance with sampling procedures. Proven experience in sample
collection and/or shipment of rock samples.
N/A
N/A
Technical Supervisor. Diploma in Science.
Staff must be trained in full compliance with sampling procedures.
N/A
Business Development Manager, preferably with Bsc Geoscience/
Petroleum Eng/Geology, with upstream experience/business.
Office with adequate IT and modeling facilities.
SG1030400 Agent
Principal
SG1040000
Office with adequate IT facilities.
Self - Operated -
Sedimentologist. PhD in Sedimentology or BSc in Geoscience with 5 yrs experience.
At least 5 years experience in sedimentology.
Experience related to modeling system/software for sedimentology.
Business Development Manager, preferably with Bsc Geoscience/
Petroleum Eng/Geology, with upstream experience/business.
Modeling System/Software
Sample Handling & Transportation
Sample Handling & Transportation
Data Handling & Interpretation
Data Handling & Interpretation
Agent
3 permanent various discipline
(Structural Geologist/ geochemist/
biostratographer/ sedimentologist)
At least 5 years oil-industry related
experience within one specific discipline.
Experience related to geological
fieldwork
Business Development Manager, preferably with Bsc
Geoscience/Petroleum Eng/Geology, with upstream experience.
Compass, hammer N/A
Modeling System/Software - Sedimentology
Geological Fieldwork
Rock Sample Handling & Transportation
Fluid Sample Handling & Transportation
Data Handling & Interpretation - Structural Geology/Geomechanics
Data Handling & Interpretation - Geochemistry
HSE Management System /ISO-certified
/equivalent/IATA
HSE Management System / OSHA / ISO 9001
HSE Management System
HSE Management System
ISO-certified /equivalent
2nd Level 3rd Level 4th LevelPrincipal/Local
Agent/Manufacturer/Packager
Technical External Bodies Registration/ExclusivityQuality e.g. Procedure of
ISO, Standard of APINew SWECs Code Mode of Operation
Minimum Requirements
Personnel & Experience
SG1 - GEOLOGICAL & RESERVOIR
Work Category Description
Provide computers (DOS, Unix, Linux,
Oracle, web-access).
Self - Operated -
N/A Geochemist PhD in
Geochemistry or Bsc Geoscience with 5 years experience.
Experience in software development and/or deployment Geochemistry tools
-database and interface. Geochemistry data-base, I/O-
systems for loading data from different vendors/laboratories, data base
manipulation and interrogation, expert system, etc.
Principal Office with adequate IT facilities.
ISO-certified /equivalent
HSE Management System
2nd Level 3rd Level 4th LevelPrincipal/Local
Agent/Manufacturer/Packager
Technical External Bodies Registration/ExclusivityQuality e.g. Procedure of
ISO, Standard of APINew SWECs Code Mode of Operation
Minimum Requirements
Personnel & Experience
SG1 - GEOLOGICAL & RESERVOIR
Work Category Description
Local Agent Office Premise/PC /Office