Straight with Micro-Grooves& Single-Lead Threads
Swish™ SystemSwish™ SystemCatalogCatalog
SwishPlant SwishPlus
Tapered with Micro-Threads& Double-Lead Threads
with Transfer & Abutment
with Straumann®Compatible Carrier
SwishPlus™
12
Table of Contents
1
2-3
4-7
10-11
16
17
20
19
21
Page #
SwishPlant & SwishPlusImplants
Straight Abutments, Transfers & Analogs
Surgical Drills
Overdenture & Screw-ReceivingAbutment Ancillary Components
Cover Screws, Healing Collars,Transfers & Analogs
Insertion Instruments &Prosthetic Tools
Surgical Sequence
Swish Surgical Tray
13Engaging & Non-EngagingAbutments
Implant Design & Surface
SwishPlant & SwishPlus Implant Dimensions
18
Straight & Angled Contoured, Titanium & Zirconia Abutments
14
15GPS, Screw-Receiving, & BallAbutments
Selection Chart for Overdenture & Screw-Retained Restorations
8-9 SwishPlant Fixture Mount Packaging & Cemented Restorations Chart
Swish™ industry-standard internal octagon implants are designed to provide compatibility with Straumann’s tissue-level implants. Both theSwishPlant and new SwishPlus feature improvements such as progressively deeper threads and vertical cutting grooves. Varying transgingivalsurface roughness allows for versatility between bone- and tissue-level placements. A further improvement is the square broached into theflats of the octagon for fixture-mount engagement (Patent Pending).
The new SwishPlus implant offers both surgical and prosthetic compatibility to Straumann's tissue-level implants. The updated features onthis new implant include micro-grooves, progressively deeper threads, a slightly tapered apex and vertical cutting grooves for self-tappinginsertion. The SBM textured surface extends up 1mm of the 2mm neck, supported by a study by Buser et. al. Int J Oral Maxillofacial Implants2005; 20: 677-686 showing less bone loss using a textured surface supra-crestal with the placement of one-stage implants.
Compatibility with Enhanced Versatility
Implant Design & Surface
Animal Studies Bone Response to SBM SurfaceSurface textured by blasting with variable size soluble HA Particles to create SwishPlant’s
Dual Blast SBM surface on the body (rough) and transmucosal (light) portion of implant.
Dual Blast SBMSurface 200X
SBM Surface 50X
1
0.43mm
0.85mm
Swish implants have a medium-rough SBM textured surface extending the length of the implant body. This surface also extends halfwayup the transmucosal portion of the SwishPlus implant while the entire transmucosal portion of the SwishPlant implant has a lightly textured surface. SBM surface is created by using a Soluble Blast Media of Hydroxylapatite (HA) crystals to create a medium-rough and alightly textured transmucosal section, without rounding of threads. We use the same vendor for SBM and HA surface treatments as usedby Paragon Implant Company from 1992-2000 when these studies were conducted.
SwishPlant implants provide more thread engagement by tapering the insidethread diameter (ID) at 3o while the outside thread diameter (OD) tapers at 1.5o
3.0 Deg.ID Taper
1.2mm
SwishPlus implants are straight-walled and designed with dimensions to matchStraumann’s tissue-level implants for surgical compatibility
0 Deg.OD Taper
1.5 Deg.ID Taper
SBM Surface: A 20 Year History of Clinical Success
1.5 Deg.OD Taper
4.1mmD 4.8mmD4.1mmD 4.8mmD
Double LeadThreads
Quadruple LeadMini-Threads
Single LeadThreads
Coronal Micro-Grooves
Swish system implants feature flat-based (Straumann) buttress threads
SwishPlant ImplantSBM Surface 20X
SwishPlant Implant Dimensions
2
3.7mmD Platform with a2.25/2.0mmD Double Internal Hex
4.8mmD SwishPlant4.2mmD Apex Diameter
2.0mmL Light SBM Texture
Straumann Compatible6.5mmD Platform with a
3.0mmD Internal Octagon
Plus internal square forFixture-mount engagement
0.75mmL Bevel
Double-lead Flat Based Threads
2.0mmL ZoneMini-threads
3.3mmD SwishPlant2.9mmD Apex Diameter
0.75mmL Bevel
Double-lead Flat Based Threads
2.0mmL zoneMini-threads
2.0mmL Light SBM Texture
5.7mmD SwishPlant5.0mmD Apex Diameter
4.1mmD SwishPlant3.5mmD Apex Diameter
2.0mmL Light SBM Texture
Straumann Compatible4.8mmD Platform with a
3.0mmD Internal Octagon
Plus internal square forFixture-mount engagement
0.6mmL Bevel
Double-lead Flat Based Threads
2.0mmL ZoneMini-threads
0.6mmL Bevel
Double-lead Flat Based Threads
2.0mmL ZoneMini-threads
2.0mmL Light SBM Texture
4.8mmD SwishPlant4.2mmD Apex Diameter
4.8mmD Platform
6.5mmD Platform
3.7mmD Platform
0.4mmL Bevel
Double-lead Flat Based Threads
2.0mmL ZoneMini-threads
2.0mmL Light SBM Texture
3.7mmD Platform 4.8mmD Platform 6.5mmD Platform
SwishPlant Fixture-Mount/Transfer
SwishPlus Implant Dimensions
3
4.8mmD SwishPlus4.8mmD Apex Diameter
1.0mmL Machined Surface
Straumann Compatible6.5mmD Platform with a
3.0mmD Internal Octagon
Plus internal square forFixture-mount engagement
0.75mmL Bevel
Single-lead Flat Based Threads
1.0mmL Zone Micro-grooves
0.75mmL Bevel
Single-lead Flat Based Threads
1.0mmL Zone Micro-grooves
1.0mmL Machined Surface
5.7mmD SwishPlus5.0mmD Apex Diameter
4.1mmD SwishPlus4.1mmD Apex Diameter
1.0mmL Machined Surface
Straumann Compatible4.8mmD Platform with a
3.0mmD Internal Octagon
Plus internal square forFixture-mount engagement
0.6mmL Bevel
Single-lead Flat Based Threads
1.0mmL Zone Micro-grooves
0.6mmL Bevel
Single-lead Flat Based Threads
1.0mmL Zone Micro-grooves
1.0mmL Machined Surface
4.8mmD SwishPlus4.8mmD Apex Diameter
4.8mmD Platform
6.5mmD Platform
SBM Texture
SBM Texture
SBM Texture
SBM Texture
3.7mmD Platform with a2.25/2.0mmD Double Internal Hex
3.3mmD SwishPlant with SwishPlus Packaging2.9mmD Apex Diameter
3.7mmD Platform
0.4mmL Bevel
Double-lead Flat Based Threads
2.0mmL ZoneMini-threads
3.7mmD Platform 4.8mmD Platform 6.5mmD Platform
SwishPlus Carrier
1.0mmL Machined Surface
4
3.7mmDPlatform
4.8mmDPlatform
SwishPlant Implant SystemFeatures and Benefits
Cover Screw & 2mmExtender on Implant
Tissue-level placement Bone-level placement
Cover Screw on Implant
SwishPlant
3.3mmDImplant
4.8mmDImplant
4.8mmDPlatform
6.5mmDPlatform
4.1mmDImplant
4.8mmDImplant
6.5mmDPlatform
5.7mmDImplant
• Straumann compatible 4.8 & 6.5mmD platforms with wrench-engaging internal square for engagement of Fixture-mount
• Implant dimensions designed to allow insertion in soft bone using Straumann drills
• 2mm neck lightly textured for bone- or tissue-level placement• Micro-threads for improved tissue attachment, reduced stress
& increased stability1
• Progressively-deeper double-lead threads for increased surfacearea & faster insertion
• Self-tapping groove for increased initial stability• Tapered body for soft bone expansion• All-in-1 Packaging includes Cover Screw, 2mm Healing Collar
& Transfer• Color-coded Fixture-mount/Transfer, shortened for use as a
Straight Abutment with snap-on Comfort Cap
One-Stage Implant Placement Options
1Stig Hansson. The Implant Neck: Smooth or Provided with Retention Elements. A Biomechanical Approach. Clin Oral Impl Res 1999:10:394-405
Cover Screw
SwishPlant Packaging
Carrier/Transfer
ExtenderComfort Cap
Code Diameter Length Platform905706 5.7mmD 6mmL 6.5mmD905708 5.7mmD 8mmL 6.5mmD905710 5.7mmD 10mmL 6.5mmD905712 5.7mmD 12mmL 6.5mmD905714 5.7mmD 14mmL 6.5mmD
Code Diameter Length Platform903308 3.3mmD 8mmL 3.7mmD903310 3.3mmD 10mmL 3.7mmD903312 3.3mmD 12mmL 3.7mmD903314 3.3mmD 14mmL 3.7mmD903316 3.3mmD 16mmL 3.7mmD
Code Diameter Length Platform904106 4.1mmD 6mmL 4.8mmD904108 4.1mmD 8mmL 4.8mmD904110 4.1mmD 10mmL 4.8mmD904112 4.1mmD 12mmL 4.8mmD904114 4.1mmD 14mmL 4.8mmD904116 4.1mmD 16 mmL 4.8mmD
Code Diameter Length Platform904806 4.8mmD 6mmL 4.8mmD904808 4.8mmD 8mmL 4.8mmD904810 4.8mmD 10mmL 4.8mmD904812 4.8mmD 12mmL 4.8mmD904814 4.8mmD 14mmL 4.8mmD
4.1mmD
3.3mmD
5
4.8mmD
4.8mmD
5.7mmD
SwishPlant for One- or Two-Stage Surgery
SwishPlant
SBM Dual Blast Surface Implants Includes Cover Screw, Extender & Carrier / Transfer & Comfort Cap
903308 903312 903314 903316 903310
904806 904810 904812 904814904808
904106 904112 904114 904116904108 904110
Code Diameter Length Platform904806W 4.8mmD 6mmL 6.5mmD904808W 4.8mmD 8mmL 6.5mmD904810W 4.8mmD 10mmL 6.5mmD904812W 4.8mmD 12mmL 6.5mmD904814W 4.8mmD 14mmL 6.5mmD 904806W 904810W 904812W 904814W904808W
905706 905710 905712 905714905708
Screws require 1.25mmD Hex Tool
Screws require 1.25mmD Hex Tool
Screws require 1.25mmD Hex Tool
Screws require 1.25mmD Hex Tool
Screws require 1.25mmD Hex Tool
6
SwishPlus Implant SystemFeatures and Benefits
SwishPlus
One-Stage Implant Placement Options
4.8mmDPlatform
4.8mmDImplant
4.8mmDPlatform
6.5mmDPlatform
4.1mmDImplant
4.8mmDImplant
6.5mmDPlatform
5.7mmDImplant
Cover Screw
SwishPlus Packaging
Carrier
Extender
• Complete compatibility with Straumann® drills, tools & prosthetics plus standard ratchet & hex tools (excluding 3.3mmD & 5.7mmD)
• 2mm neck half textured for tissue-level or esthetic placement1
• Micro-grooves for improved tissue attachment & reduced stress2*
• Progressively-deeper single-lead threads for increased surface area & complete surgical compatibility*
• Self-tapping groove for increased initial stability• Tapered apical end to initiate self-tapping• All-in-1 Packaging includes Cover Screw, 2mm Healing Collar
& Carrier• Color-coded carrier features demarcations for easy indexing of
internal octagon flats* Excluding the 3.3mmD which features a SwishPlant implant
body with the SwishPlus All-in-1 Packaging
1Buser et. al. Int J Oral Maxillofacial Implants 2005; 20: 677-6862Stig Hansson. The Implant Neck: Smooth or Provided with Retention Elements. A Biomechanical Approach. Clin Oral Impl Res 1999:10:394-405
Cover Screw & 2mmExtender on Implant
Tissue-level placement Bone-level placement
Cover Screw on Implant
3.7mmDPlatform
*3.3mmDImplant
Code Diameter Length Platform924106 4.1mmD 6mmL 4.8mmD924108 4.1mmD 8mmL 4.8mmD924110 4.1mmD 10mmL 4.8mmD924112 4.1mmD 12mmL 4.8mmD924114 4.1mmD 14mmL 4.8mmD924116 4.1mmD 16 mmL 4.8mmD
Code Diameter Length Platform924806 4.8mmD 6mmL 4.8mmD924808 4.8mmD 8mmL 4.8mmD924810 4.8mmD 10mmL 4.8mmD924812 4.8mmD 12mmL 4.8mmD924814 4.8mmD 14mmL 4.8mmD
4.1mmD
7
4.8mmD
4.8mmD
SwishPlus for One- or Two-Stage SurgerySwishPlus
924806 924810 924812 924814924808
Code Diameter Length Platform924806W 4.8mmD 6mmL 6.5mmD924808W 4.8mmD 8mmL 6.5mmD924810W 4.8mmD 10mmL 6.5mmD924812W 4.8mmD 12mmL 6.5mmD924814W 4.8mmD 14mmL 6.5mmD 924806W 924810W 924812W 924814W924808W
Code Diameter Length Platform925706 5.7mmD 6mmL 6.5mmD925708 5.7mmD 8mmL 6.5mmD925710 5.7mmD 10mmL 6.5mmD925712 5.7mmD 12mmL 6.5mmD925714 5.7mmD 14mmL 6.5mmD
5.7mmD
925706 925710 925712 925714925708
924106 924112 924114 924116924108 924110
Code Diameter Length Platform923308 3.3mmD 8mmL 3.7mmD923310 3.3mmD 10mmL 3.7mmD923312 3.3mmD 12mmL 3.7mmD923314 3.3mmD 14mmL 3.7mmD923316 3.3mmD 16mmL 3.7mmD
3.3mmDSBM Surface Implants
923308 923312 923314 923316 923310
Includes Cover Screw, Extender & Carrier
SwishPlant Fixture-Mount Packaging
8
SwishPlant Implants are mounted on color-coded fixture-mounts, designed for use as implant level transfers or shortened to function as straight abutments. A cover screw and implant extender is
included in each vial. The SwishPlant fixture-mount is provided with a snap-on comfort cap.
Use 30Ncm in hard bone. In softbone, only use finger pressure
Check for occlusal clearanceprior to attaching comfort cap
Test retention & rotate ifnecessary to increase retention
Suture soft tissue aroundcomfort cap
Remove colored section from fixture-mount through groove creating afinal straight abutment
Attach fixture-mount to corresponding color-coded implant analog
Each cap is color-coded byplatform diameter of implant
All of our implants come in a sterile vial
Each label is color-coded withtwo tear-off labels
Prepare surgical site with drill
Drop implant assembly out ofvial onto a sterile surface
Remove implant assembly witha fixture-mount drill or ratchet
Insert implant into osteotomy Index fixture-mount flat to labial
Remove the holder containingthe cover screw & comfort cap
Flat of octagon is aligned to thelabial surface
Snap-on comfort cap is locatedin the top portion of holder
Remove fixture-mount
3.7mmD 4.8mmD 6.5mmD
Selection Chart: Titanium Abutments for Cemented Restorations
Narrow Straight Abutment with Bevel Covered
1mm Collar8530-31
2mm = 8530-32
0.75mm Collar8530-51
2mm = 8530-52
2-Piece HexEngaging Abutment
8530-21
0.75mm Collar9065-31P
0.75mm Collar9065-51P
2-Piece OctagonEngaging Abutment
9065-20
1-Piece SolidAbutment9065-20-1
2-Piece OctagonEngaging Abutment
9048-20
1-Piece SolidAbutment9048-20-1
0.5mm Collar9048-21N
2mm = 9048-22N
ShortenFixture-mount
for 1.0mm Collar
0.5mm Collar9037-21
2mm = 9037-22
ShortenFixture-mount
duplicates 9037-21
0.75mm Collar9048-31P
Straight ContouredAbutment
0.5mm Collar9048-31
0.75mm Collar9048-51P
Straight ContouredAbutment
2mm Collar9048-32
ShortenFixture-mount
duplicates 9048-21N
Straight Snap-onAbutment
2mm Collar9048-22
Angled ContouredAbutment
0.5mm Collar9048-51
Angled ContouredAbutment
2mm Collar9048-52
Narrow Straight Abutment with Bevel Exposed
Straight and Angled Platform Switching Abutments with Contoured Margins
4.8mmD Platform Straight and Angled Abutments with Flared Collars
3.7mmD Platform 4.8mmD Platform 6.5mmD Platform
Abutments are compatible with Straumann Tissue level implants with 4.8mmD and 6.5mmD prosthetic platforms 9
Straight Snap-onAbutment
0.5mm Collar9048-21
OROR
Implant Transfer closed-tray 9048-05open-tray 9048-08
Flared 4.8 to 5.7
Fixture-mount/Transfer
Implant Transfer closed-tray 9048-05Nopen-tray 9048-08N
Fixture-mount/Transfer
Implant Transferclosed-tray 9037-05open-tray 9037-08
Fixture-mount/Transfer
10
Selection Chart: Straight Abutments (Snap-On), Transfers & Analogs
3.7mmD
3.7mmD Platform4.8mmD
4.8mmD Platform6.5mmD
6.5mmD Platform
Implant Analog 9048-06
Implant Analog 9065-06
Implant Analog 9048-06
Implant Analog 9037-06
Straight AbutmentAnalog
3057incl. Castable Coping
Straight AbutmentAnalog
3065incl. Castable Coping
StraightAbutment
Analog9037
incl. Castable Coping
Straight AbutmentAnalog
9047incl. Castable Coping
ComfortCap
3047-26
CastableCoping3047-28
ComfortCap
3057-26
CastableCoping3057-28
ComfortCap
3065-26
CastableCoping3065-28
ComfortCap
3037-26
CastableCoping3037-28
Straight Abutment Transfer 3057-02
Straight Abutment Transfer 3065-02
Straight Abutment Transfer 9037-02
9037-21 9048-21N 9048-20 9048-21 9065-20 9065-20-19048-229048-20-18530-21
Straight Abutment Transfer 9047-02
Straight Abutments
Straight Abutments with Flared Collars
4.8 to 5.7
SwishPlantFixture Mount
OR
Straight Abutments
SwishPlantFixture Mount
SwishPlantFixture Mount
StraightAbutment
Coveredbevel
narrowprofile
Coveredbevel
narrowprofile
Exposed bevel Covered bevel
2-pieceAbutment
1-piece Solid Abutment
Exposed bevel
2-pieceAbutment
0.5mmLcuff
2mmLcuff
1-piece Solid Abutment
Exposedbevel
platformswitching
Implant Transfer closed-tray 9065-05open-tray 9065-08
Code Platform Abutment Kit9048-20 4.8mmD Includes Analog 90479048-20-1 4.8mmD Includes Analog 90479065-20 6.5mmD Includes Analog 30659065-20-1 6.5mmD Includes Analog 3065
Straight Abutment Analogs
Straight Abutments
Code Platform Collar Heights Use Analog8530-21 3.7mmD PS 1.0mm 30378530-22 3.7mmD PS 2.0mm 30378530-23 3.7mmD PS 3.0mm 30379037-21 3.7mmD 0.5mm 30379037-22 3.7mmD 2.0mm 30379048-21N 4.8mmD 0.5mm 90479048-22N 4.8mmD 2.0mm 90479048-21 4.8mmD 0.5mm 30579048-22 4.8mmD 2.0mm 3057
11
Straight Abutments, Snap-on Transfers & Lab Analogs
Includes Transfer, Comfort Cap & Fixation Screw
Code Abutment Width3037-26 3.7mmD3047-26 4.7mmD3057-26 5.7mmD3065-26 6.5mmD
Code Abutment Width9037-02 3.7mmD9047-02 4.7mmD3057-02 5.7mmD3065-02 6.5mmD
3047-26 3057-26 3065-263037-26
9047-02 3057-02 3065-029037-02
Straight Abutments - Exposed Bevel
9048-20-1 9065-20 9065-20-19048-20
Code Abutment Width3037-28 3.7mmD3047-28 4.7mmD3057-28 5.7mmD3065-28 6.5mmD
3047-28 3057-28 3065-283037-28
Includes Castable Coping
8530-21 8530-22 8530-23
9048-21N 9048-22N 9048-21 9048-22
9037-21 9037-22
“PS” for Platform Switching Interface
Straight Abutment Comfort Caps
Straight Abutment Transfers
Straight Abutment Castable Coping
Duo-Grip™ allows you the flexibility to use either a Straumann SCSDriver or a standard 1.25mmD hex tool. All screws featuring Duo-Grip™ are anodized yellow for easy identification. The Duo-Grip™ iconalso identifies additional prosthetic components with this feature.
The screws for the 3.7mmD platform feature a hex that requires astandard 1.25mmD hex tool. All screws featuring the hex are anodized blue for easy identification.
30659037 30579047
Code Abutment Width9037 3.7mmD9047 4.7mmD3057 5.7mmD3065 6.5mmD
Includes Fixation Screw
Includes Fixation Screw
Straight & Angled Contoured, Titanium & Zirconia Abutments
12
Code Platform Collar Heights Replacement Screw8530-31 3.7mmD PS 1.0mm 1000-208530-32 3.7mmD PS 2.0mm 1000-209048-31 4.8mmD 0.5mm 1000-199048-32 4.8mmD 2.0mm 1000-199048-31P 4.8mmD PS 0.75mm 1000-199065-31P 6.5mmD PS 0.75mm 1000-19
Straight Contoured Abutments
9048-31 9048-32
8530-31 8530-32
9048-31P
9065-31P
Code Platform Collar Heights Replacement Screw8530-51 3.7mmD PS 0.75mm 1000-208530-52 3.7mmD PS 2.0mm 1000-209048-51 4.8mmD 0.5mm 1000-199048-52 4.8mmD 2.0mm 1000-199048-51P 4.8mmD PS 0.75mm 1000-199065-51P 6.5mmD PS 0.75mm 1000-19
Angled Contoured Abutments
9048-51 9048-52
8530-51 8530-52
9048-51P
9065-51P
0°, 8° & 15° Zirconia Contoured Abutments
Code Platform Angulation Collar Heights Replacement Screw9037-31C 3.7mmD 0° 1.0mm 1000-209037-32C 3.7mmD 0° 2.0mm 1000-20
9037-51-08C 3.7mmD 8° 1.0mm 1000-209037-52-08C 3.7mmD 8° 2.0mm 1000-209037-51-15C 3.7mmD 15° 1.0mm 1000-209037-52-15C 3.7mmD 15° 2.0mm 1000-20
9037-30CB 3.7mmD - 0.5mm 1000-209048-31C 4.8mmD 0° 1.0mm 1000-199048-32C 4.8mmD 0° 2.0mm 1000-19
9048-51-08C 4.8mmD 8° 1.0mm 1000-199048-52-08C 4.8mmD 8° 2.0mm 1000-199048-51-15C 4.8mmD 15° 1.0mm 1000-199048-52-15C 4.8mmD 15° 2.0mm 1000-19
9048-30CB 4.8mmD - 0.5mm 1000-19
9037-31C 9037-51-08C 9037-51-15C
9037-30CB
9048-32C 9048-52-08C
9048-31C 9048-51-08C
9048-52-15C
9048-51-15C
9048-30CB
9037-32C 9037-52-08C 9037-52-15C
Includes Fixation Screw
Plastic & Titanium Engaging, Non-Engaging Abutments
Price includes Fixation Screw Titanium Non-Engaging Temporary Abutments
Price includes Fixation Screw Plastic Non-Engaging Castable Abutments
Code Platform Collar Heights Replacement Screw8530-46 3.7mmD PS 1.0mm 1000-209048-46 4.8mmD 1.0mm 1000-199065-46 6.5mmD 1.0mm 1000-19
Code Platform Collar Heights Replacement Screw8530-49 3.7mmD PS 1.0mm 1000-209048-49 4.8mmD 1.0mm 1000-199065-49 6.5mmD 1.0mm 1000-19
Price includes Fixation Screw Plastic Engaging Temporary Abutments
Code Platform Collar Heights Replacement Screw8530-47 3.7mmD PS 1.0mm 1000-419048-47 4.8mmD 1.0mm 1000-429065-47 6.5mmD 1.0mm 1000-42 8530-47 9048-47 9065-47
8530-49 9048-49 9065-49
8530-46 9048-46 9065-46
Price includes Fixation Screw
Code Platform Collar Heights Replacement Screw8530-40 3.7mmD PS 1.0mm 1000-209048-40 4.8mmD 1.0mm 1000-19
Gold Engaging Cast-to Abutments
8530-40 9048-40
“PS” for Platform Switching Interface
Price includes Fixation Screw
Code Platform Collar Heights Replacement Screw8530-41 3.7mmD PS 1.0mm 1000-209048-41 4.8mmD 1.0mm 1000-19
Gold Non-Engaging Cast-to Abutments
8530-41 9048-41
13
Code Description1000-20 For use with 3.7mmD hexagon platform1000-41 For use with 3.7mmD hexagon platform1000-26 For use with 3.7mmD hexagon platform1000-18 For use with 4.8 & 6.5mmD octagon platforms
1000-19S For use with 4.8 & 6.5mmD octagon platforms1000-19 For use with 4.8 & 6.5mmD octagon platforms1000-42 For use with 4.8 & 6.5mmD octagon platforms
Replacement Fixation Screws
1000-261000-203.7mmD Hex Platform 4.8 & 6.5mmD Octagon Platform
1000-42 1000-181000-41
Closed-TrayTransfer &TemporaryAbutment
Abutments
1000-19
Closed-TrayTransfer &TemporaryAbutment
Abutments
Open-Tray Transfer& Waxing Screw
Open-Tray Transfer& Waxing Screw
1000-19S
Angled Screw-Receiving
& GPS Abutments
14
3.7mmD Platform 4.8mmD Platform
Selection Chart: Overdenture & Screw-Retained Restorations
BallAbutment
Components
Ball Abutments
OverdentureAbutments
Overdenture Copings
OverdentureAbutment
Components
OD AbutmentComfort Cap
Transfer and
Analogs*1000-68*4000-13
Open-Tray Transfer Closed-Tray Transfer
Overdenture Abutment Transfer, Analog & Comfort Cap
Ball Attachments
GPSAbutment
Components
GPSAbutments
GPS Attachments
Gold Titanium Plastic Gold/Plastic Titanium
**1000-84**1000-87 1000-85 1000-81 1000-82 1000-88 1000-83 1000-86
9037-61 9037-62 9037-63 9048-61 9048-62 9048-63 9048-64
9037-71 9037-72 9037-73 9048-71 9048-72 9048-73
1000-61 1000-62 1000-63
Overdenture Abutments (*Includes Transfer and Comfort Cap)
1000-64 1000-65 1000-66 1000-67 1000-69
Ball Abutments (**Includes Transfer and Comfort Cap)
9048-91 9048-92 9048-93 9048-949037-91 9037-92 9037-93 9037-94
Abutments are compatible with Straumann Tissue level implants with 4.8mmD and 6.5mmD prosthetic platforms
GPS Abutments (***Includes Transfer, Abutment Housing Kit and Comfort Cap)
9037-94-30 9048-94-30
9048-64-309037-64-30
***1000-94 1000-92W1000-95
1000-92E
1000-98S 1000-98SI1000-93 1000-96***4500-26
1000-92R1000-92G ***1000-91
1000-92B1000-92P
1000-92C
9037-64-15 9048-64-15
9037-94-15 9048-94-15
15
Screw-Receiving, Ball, GPS & Angled Abutments
Code Platform Collar Heights9037-61 3.7mmD 1mm9037-62 3.7mmD 2mm9037-63 3.7mmD 3mm9048-61 4.8mmD 1mm9048-62 4.8mmD 2mm9048-63 4.8mmD 3mm9048-64 4.8mmD 4mm
Includes Transfer & Comfort CapRequires 1.25mmD Hex Tool
Overdenture Abutments
9037-61 9037-639037-62
Code Platform Collar Heights9037-71 3.7mmD 1mm9037-72 3.7mmD 2mm9037-73 3.7mmD 3mm9048-71 4.8mmD 1mm9048-72 4.8mmD 2mm9048-73 4.8mmD 3mm
Includes Transfer & Comfort CapRequires 1.25mmD Hex Tool
Ball Abutments
9037-71
9048-71 9048-73
9037-72
9048-72
9048-649048-639048-629048-61
Code Platform Collar Heights9037-91 3.7mmD 1mm9037-92 3.7mmD 2mm9037-93 3.7mmD 3mm9037-94 3.7mmD 4mm9048-91 4.8mmD 1mm9048-92 4.8mmD 2mm9048-93 4.8mmD 3mm9048-94 4.8mmD 4mm
Includes Transfer, Comfort Cap, Metal Housing, Clear Male Liner & Spacer -GPS Abutments
9037-91 9037-939037-92
9048-91 9048-939048-92
9037-94
9048-94
Can be used with 1.25mmD Hex Tool or Straumann SCS Driver
Code Platform Description9037-64-15 3.7mmD 15º Angled Abutment9048-64-15 4.8mmD 15º Angled Abutment9037-64-30 3.7mmD 30º Angled Abutment9048-64-30 4.8mmD 30º Angled Abutment
Screw-Receiving Angled Overdenture Abutments
9048-64-309037-64-309037-64-15 9048-64-15
Code Platform Description9037-94-15 3.7mmD 15º Angled Abutment9048-94-15 4.8mmD 15º Angled Abutment9037-94-30 3.7mmD 30º Angled Abutment9048-94-30 4.8mmD 30º Angled Abutment
Angled GPS Abutments
9048-94-309037-94-309037-94-15 9048-94-15
Code Description1000-60 Replacement Screw Top for Angled Base [Requires 2.5mmD Hex Tool]
1000-70 Replacement Ball Top for Angled Base [Requires 1.25mmD Hex Tool]
1000-90 Replacement GPS Top for Angled Base [Requires 1.25mmD Hex Tool]
Replacement Tops for Angled Abutments Includes Transfer & Comfort Cap
1000-901000-701000-60
9037-73
Includes Transfer & Comfort Cap
Includes Transfer, Comfort Cap, Metal Housing, Clear Male Liner & Spacer [GPS Top requires 1.25mmD Hex Tool ]
Closed-Tray Implant Transfers
Open-Tray Implant Transfers
Cover Screws, Healing Collars, Transfers & Analogs
Code Platform Replacement Screw9037-05 3.7mmD 1000-419048-05N 4.8mmD 1000-429048-05 4.8mmD 1000-429065-05 6.5mmD 1000-42
Implant Analogs
Code Platform9037-06 3.7mmD9048-06 4.8mmD9065-06 6.5mmD 9065-069048-069037-06
Surgical Cover Screws
Price includes Fixation Screw
1000-421000-41 9048-05N 9065-05
Price includes Fixation Screw
Code Platform Replacement Screw9037-08 3.7mmD 1000-269048-08N 4.8mmD 1000-189048-08 4.8mmD 1000-189065-08 6.5mmD 1000-18 1000-18 9048-08N 9048-08 9065-089037-081000-26
9037-05 9048-05
16
Code Platform Width Length9037-01H 3.7mmD 3.8mmD 1mmL9048-01H 4.8mmD 4.9mmD 1mmL9065-01H 6.5mmD 6.6mmD 1mmL
9065-01H9048-01H9037-01H
Code Platform Width Length9037-12H 3.7mmD 3.7mmD 2mmL9037-13H 3.7mmD 3.7mmD 3mmL9048-12NH 4.8mmD 5.1mmD 2mmL9048-13NH 4.8mmD 5.1mmD 3mmL9048-12H 4.8mmD 5.8mmD 2mmL9048-13H 4.8mmD 5.8mmD 3mmL9065-12H 6.5mmD 6.5mmD 2mmL9065-13H 6.5mmD 6.5mmD 3mmL
Duo-Grip™ Healing Collars
9065-12H 9065-13H
9048-12NH 9048-13NH
Components include Duo-Grip™ feature for use with 1.25mmD HexTool or Straumann SCS Driver
9037-12H 9037-13H
9048-12H 9048-13H
Components include Duo-Grip™ feature for use with 1.25mmD HexTool or Straumann SCS Driver
17
Ancillary Components for Overdenture & Screw-Retained Restorations
GPS Instrumentation
Ball Abutment Components
Code Platform Description1000-61 5.0mmD Aluminum Analog1000-62 5.0mmD Open-Tray Transfer plus Fixation Screw1000-63 5.0mmD Closed-Tray Transfer plus Fixation Screw1000-68 5.0mmD Plastic Abutment Transfer - 2ea4000-13 5.0mmD Plastic Comfort Cap - 2ea1000-14 - Replacement Open-Tray Fixation Screw - 2ea1000-15 - Replacement Closed-Tray Fixation Screw - 2ea
Code Description1000-94 Impression Coping - 2ea1000-95 Abutment Analog 4mmD - 2ea1000-97 Abutment Parallel Post - 4ea4500-26 Comfort Cap - 2ea1000-99 Plastic Abutment Angle Measure Guide
Code Description1000-81 Ball Abutment Housing - 2ea1000-82 Nylon Liner - 2ea1000-83 Nylon Liner Transfer - 2ea1000-84 Ball Abutment Transfer - 2ea1000-85 Ball Abutment Analog1000-86 Ball Abutment Tools1000-87 Ball Abutment Comfort Cap - 2ea1000-88 Ball Abutment Housing & Nylon Liner
GPS Abutment Transfer, Analogs & Alignment Tools
Overdenture Abutment Comfort Cap, Transfers & Analog
1000-82
1000-84
1000-861000-85 1000-87 1000-88
1000-831000-81
1000-681000-61 1000-62 1000-63 4000-13
1000-99
1000-97
1000-95
4500-26
1000-94
Code Description1000-96 Core Tool - Male Removal & Seating Tool 1000-96
Code Retention Force Description1000-92W 5.0lbs Internal Replacement Male White - 4ea1000-92C 4.5lbs External Replacement Male Clear - 4ea1000-92P 3.0lbs Internal Replacement Male Pink - 4ea1000-92G 3.0lbs External Replacement Male Green - 4ea1000-92E 2.0lbs External Replacement Male Orange - 4ea1000-92B 1.5lbs Internal Replacement Male Blue - 4ea1000-92R 1.0lb External Replacement Male Red - 4ea1000-91 - GPS Abutment Housing Kit - 1ea1000-93 - Black Processing Male - 4ea1000-98SI Assorted Internal Processing Cap/Male Kit - 1ea1000-98S Assorted Processing Cap/Male Kit - 1ea
GPS Abutment Components
1000-93
1000-92B
1000-92E
1000-92P
1000-92C
1000-98S1000-98SI
1000-91
Overdenture Abutment Components
Code Platform Description1000-64 5.0mmD Gold Coping1000-65 5.0mmD Titanium Coping1000-66 5.0mmD Plastic Coping1000-67 5.0mmD Gold & Plastic Coping1000-69 5.0mmD Titanium Temporary Coping 1000-05 - Coping Fixation Screw - 2ea
Includes Fixation Screw [1000-05]
1000-92R
1000-92G
1000-92W
1000-661000-65 1000-671000-05 1000-64 1000-69
Screws require 1.25mmD Hex Tool
Straight Hex Tools
Code DescriptionHT1.25L 1.25mmD Straight Hex Tool Extra Long (For use with Torque Wrench)
HT1.25 1.25mmD Straight Hex Tool Long (For use with Torque Wrench)
HT1.25S 1.25mmD Straight Hex Tool Short (For use with Torque Wrench)
HT2.0 2.0mmD Hex Tool LongHT2.0S 2.0mmD Hex Tool ShortHT2.5 2.5mmD Hex Tool Long (with retentive O-ring)
HT2.5S 2.5mmD Hex Tool Short (with retentive O-ring)
9048-07 SwishPlant Insertion ToolOCTT Octagon Alignment Tool
9048-07HT2.5HT2.0HT1.25
HT2.5S OCTTHT2.0SHT1.25S
Square connection for use with Ratchet or Torque Wrench
Surgical Trays
Code DescriptionSPST Empty Surgical Tray for SwishPlant Implants
SPCST Complete Surgical Kit for SwishPlant Implants
Surgical & Prosthetic Instruments
SPST SPCST
18
Tapered Hex Tools
Code DescriptionTHT1.25 1.25mmD Tapered Hex Tool Long
THT1.25S 1.25mmD Tapered Hex Tool Short THT1.25STHT1.25
Hex Drills
Code DescriptionHD1.25 1.25mmD Hex DrillHD2.0 2.0mmD Hex DrillHD2.5 2.5mmD Hex Drill (with retentive O-ring)
Latch head connection for use with Surgical Motor
Insertion Instruments
Code DescriptionR Ratchet
SPRI SwishPlus Ratchet InsertTW30 30Ncm Torque WrenchTW35 35Ncm Torque Wrench
SSH2.5 2.5mmD Stainless Steel Handle (with retentive O-ring)
FMD Fixture Mount DrillSPFMD SwishPlus Fixture Mount Drill
PAR Paralleling Tool 2.8/2.3LDRILL Locator Drill
DE Drill ExtenderTWM Multi-Setting Torque Wrench (15, 20, 25, 30, 35, 40, 45, 50 & 60Ncm)
ABH Analog Holder
HD1.25 HD2.0 HD2.5
SSH2.5TW30 TW35
PARSPFMD
R
FMD DELDRILL
ABH
TWM
HT1.25L
SPRI
5.7mmD Implants
4.8mmD Implants
4.1mmD Implants
Pilot Drills
19
Code DescriptionSPD3.5 3.5mmD Straight Drill with 6-16 markings
SPD3.5S 3.5mmD Straight Drill with 6-10 markingsSPCD4.1 4.1/ 4.8mmD SwishPlant Countersink Drill
Code DescriptionSPD4.2 4.2mmD Straight Drill with 6-16 markings
SPD4.2S 4.2mmD Straight Drill with 6-10 markingsSPCD4.8 4.8 / 4 .8mmD SwishPlant Countersink Drill SPCD4-6 4.8 / 6.5mmD SwishPlant Countersink Drill
Surgical Drills
Code DescriptionSPD2.3 2.3mmD Straight Drill with 6-16 markingsSD2.3S 2.3/2.0mmD Step Drill with 6-10 markings
SPD2.3
Code DescriptionSPD5.1 5.1mmD Straight Drill with 6-16 markingsD5.1S 5.1mmD Straight Drill with 6-10 markings
SPCD5-6 5.7/ 6.5mmD SwishPlant Countersink Drill
SPD3.5 SPD3.5S SPCD4.1
SPD5.1 D5.1S SPCD5-6
SPD4.2 SPD4.2S SPCD4.8 SPCD4-6
3.3mmD Implants
Code DescriptionSPD2.8 2.8mmD Straight Drill with 6-16 markingsSD2.8S 2.8/2.3mmD Step Drill with 6-10 markings
SPCD3.3 3.3/ 3.7mmD SwishPlant Countersink Drill
SPD2.8 SD2.8S SPCD3.3
SD2.3S
Tissue LevelFINAL DRILL
SPCD5-65.7mmD/6.5mmD
Bone LevelFINAL DRILL
SPCD5-65.7mmD/6.5mmD
Tissue LevelFINAL DRILL
SPCD4.84.8mmD/4.8mmD
Bone LevelFINAL DRILL
SPCD4.84.8mmD/4.8mmD
Tissue LevelFINAL DRILL
SPCD4-64.8mmD/6.5mmD
Bone LevelFINAL DRILL
SPCD4-64.8mmD/6.5mmD
Tissue LevelFINAL DRILL
SPCD4.14.1mmD/4.8mmD
Bone LevelFINAL DRILL
SPCD4.14.1mmD/4.8mmD
Tissue LevelFINAL DRILL
SPCD3.33.3mmD/3.7mmD
Bone LevelFINAL DRILL
SPCD3.33.3mmD/3.7mmD
SOFT BONE3.3mmD Implant
DENSE BONE3.3mmD Implant
2.3mmDDrill
3.3/3.7
SPD2.8
20
Drill Sequence
SOFT BONE4.1mmD Implant
DENSE BONE4.1mmD Implant
2.3mmDDrill
4.1/4.8
SPD3.5SPD2.8
2.3mmDDrill
SPD4.2SPD3.5SPD2.8
2.3mmDDrill
Use SPD5.1 Drill as final step for Tissue-levelor Bone-level placement
Crestal bone in Maxilla will expand without countersink
Use SPD4.2 Drill as final step for Tissue-level or
Bone-level placement
Crestal bone in Maxilla will expandwithout countersink
Use SPD4.2 Drill as final step forTissue-level placement.
Crestal bone in Maxilla will partially expand to allow 1mm
subcrestal seating of neck.
5.7/6.5
SPD5.1SPD4.2SPD3.5SPD2.8
4.8/4.8 4.8/6.5
SOFT BONE5.7mmD Implant
DENSE BONE5.7mmD Implant
SOFT BONE4.8mmD Implant
DENSE BONE4.8mmD Implant
Use SPD3.5 Drill as final step for Tissue-levelor Bone-level placement
Crestal bone in Maxilla will expand withoutcountersink
Use SPD2.8 Drill as final step for Tissue-level orBone-level placement
Crestal bone in Maxilla will expand without countersink
5.7mmD Straight / Tapered Implant
4.8mmD Straight / Tapered Implant
4.1mmD Straight / Tapered Implant
3.3mmD Straight / Tapered Implant
Note: Tissue-level placement will differ between SwishPlant & SwishPlus with the exception of the 6mmL SwishPlant which follows the SwishPlus tissue-level protocol.
21
THT1
.25S
HT1
.25S
EXTR
AH
T2.5
S
THT1
.25
PAR
(Qua
ntity
of 4
)
HD
2.5
LDRI
LLD
E
R
SSH
2.5
HT1
.25
HT2
.0
HD
1.25
HT2
.5
Complete Surgical Tray Contents
SPD
3.5
SPD
3.5S
SPCD
4.1
SPD
5.1
D5.
1SSP
CD5-
6SP
D2.
8SD
2.8S
SPCD
3.3
SPD
4.2
SPD
4.2S
SPCD
4.8
SPCD
4-6
SD2.
3SSP
D2.
3
INSE
RTIO
NTO
OL
FMD
1
2
3
4
5
All trademarks are property of their respective companies.1System Variation: 3.3mmD & 5.7mmD SwishPlus are tapered; 3.3mmD also has SwishPlant threads
www.implantdirect.com
Swish™ Implant System Advantages:
Designed For Success,
SwishPlusStraight with Micro-Grooves
& Straumann Threads
SwishPlantTapered with Micro-Threads
& Double-Lead ThreadsInternal Octagon (Niznick US Pat. #4,960,381 Licensed to Straumann)
Two Implant Designs & Packaging Options
Prosthetic compatibility with Straumann’s Tissue-Level implants (Standard, Standard Plus and Tapered Effect)Internal square broached in flats of octagon for fixture-mount engagement (Pat. Pend.)
Allows for selection based on price, packaging or thread designSwishPlus : Includes cover screw, healing collar & carrier compatible with Straumann tool & standard ratchet
SwishPlant: Includes cover screw, healing collar, comfort cap & straight abutment/transfer
Packaged For Value
All-in-1 Packaging includes implant, straight abutment/transfer, cover screw & healing collar
SwishPlant™ Implant
1
Reality Check
Straumann Customers
Customer Service &
Technical Support
online, over thephone, or in your office
Cover Screw Healing Collar
1
2
3
4
5
2mm neck half textured for tissue-level or esthetic placementMicro-grooves for improved tissue attachment & reduced stressProgressively-deeper single-lead threads for increased surface area & complete surgical compatibilitySelf-tapping groove for increased initial stabilityTapered apical end to initiate self-tapping
2mm neck lightly textured for bone- or tissue-level placementMicro-threads for improved tissue attachment, reduced stress & increased stabilityProgressively-deeper double-lead threads for increased surface area & faster insertionSelf-tapping groove for increased initial stabilityTapered body for soft bone expansion
Comfort Cap
1
2
3
4
5
*5-03-12-0033* 5K-03-12-0033i Printed in the U.S.A. Copyright © 2012 Implant Direct Sybron International. All Rights Reserved