1
NEW
swissClamp
Leaflet
09.2015
Swiss precision engineering
Intelligent workpiece clamping
New multiple clamping system
2
pL LEHMANN is a medium-sized company speciali-zing in CNC rotary tables and precision engineering for more than 40 years. Today, present in more than 25 countries (see back of this catalog).
The company is committed to typical Swiss values+ Product quality+ Advanced technology+ Innovation and flexibility+ Long-term, solid business policy
Other catalogs
Workpiece clamping technologyWhat started with clamping mandrels, precision vises, hairline set squares for toolmakers and tool clamping systems, now emerges as the new swissClamp – an economic, modular and simple multiple clamping system for streamlined series production.
Be inspired by the multitude of interesting possible uses. Reduce your production costs by using this intelligent clamping system.
For more information, see www.lehmann-rotary-tables.com, or ask for the desired support at your closest pL branch office.
Overview of branches Product and facts Service – Lifecycle
swissClamp – a new multiple clamping system for your series production: simple, modular, compact and cost-effective
Since 1974Swiss precision engineering
3
Automotive
Aerospa
ce/T
urbin
es
Med
ical
/De
ntal
Watches/Micro Technology
Mechanics
Automotive Medical/Dental Watches/ Micro Technology
Aerospace/Turbines Mechanics
GRIP CLAMPING (first processing)
DUO clamping means: MONO clamp mounted on opposite side (here, on clamping yoke, GRIP clamping on the left, FINISH clamping on the right).
DUO
cla
mpi
ngM
ON
O c
lam
ping
FINISH CLAMPING (subsequent processing)
The
entir
e ca
talo
g is
subj
ect t
o te
chni
cal c
hang
es in
with
out n
otic
e
4
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12
3 6
6
6
0 50 80 50 80
80 50 99
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12 6
0 50 80 50 80
80 50 99
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12 6
0 50 80 50 80
80 50 99
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12 6
0 50 80 50 80
80 50 99
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12
3 6
6
6
0 50 80 50 80
80 50 99
GRIP clamping (first processing)
Pull-down clamping with GRIP
+ clamping travel approx. 1 mm (red area)
+ tilt movement when clamping approx. till 2.5°
+ stamping jaws are clinging
Clamping area (applies to GRIP and FINISH)
+ MONO: 6...108 mm
+ DUO: 106...200 mm (at hole grid 50 mm)
+ DUO: 126...220 mm (at hole grid 40 mm)
Clamping depth (applies to GRIP and FINISH)
+ 6 mm (as in image; standard)
+ 3 mm (with spacer; only possible on standard clamping)
Hole matrix (applies to GRIP and FINISH)
+ 40 mm (like presented screws)
+ 50 mm
+ longitudinal and transversal
Here: processing of bars, loosening after final processing
adaptable to zero point clamping system
2 positioning holes for precision mounting
Tightened screws max. 37Nm, Clamping force max. 16 kN / jaw
Standard clampingCompact clamping
5
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12 6
0 50 80 50 80
80 50 99
24.5 43
0 14.6 27.2 54.5
60.5 57.5
0 30
.5
73.5
46.5
34.5
20 20 19.9 20 20 20 20 20 20
199.8
12 6
0 50 80 50 80
80 50 99
FINISH CLAMPING (subsequent processing)
+ 40 % times more workpieces on the same clamping length+ 2.8 times more unmanned operating time+ 50% less acquisition costs with same clamping length
Parallel clamping
+ Clamping travel max. 1 mm (red area)
+ anti-twist secured, precise clamping without creating impressions
Workpiece stop (applies to GRIP and FINISH)
+ hole matrix
+ perfect for individual parts
Modular (applies to GRIP and FINISH)
+ MONO and DUO clamping (see p. 3)
+ turnable fixed jaw (see below)
Design (applies to GRIP and FINISH)
+ simple and nonsensitive
+ good chip and coolant flow
+ easy to clean
adaptable to zero point clamping system
Tightened screws 37Nm, Clamping force 16 kN
Values concerning calculation example p. 7
Standard clampingCompact clamping
6
Application examples
Modular clamping system from lot size 1, with extremely good accessibility
MONO: Clamping cube, flying on 4th axis
MONO: Clamping module on 4th/5th axis
MONO: Clamping cube on 4th axis
MONO and DUO: Clamping yoke on 4th axis
3 different workpieces, 1x in two clampings and 2x in one clamping, finally processed
112 workpieces in one clamping, finally processed – unmanned operating time approx. 3.3 hours
two different workpieces, MONO clamping on bottom, DUO clamping on top
3 identical workpieces, processed from 5 sides (depending on workpiece and accessibility)
7
Economy / Product range
Facts that everybody convinced: purchase and win!
MONO: Clamping tower on 4th Axis
Example: Increase in operating time
Example: Comparison of costs from practice
Product range
3 different workpieces, 1x in two clampings and 2x in one clamping, finally processed, a total of 76 parts
Workpiece from practice for the
calculations
up to now with swissClamp
Processing time: 50 sec Processing time: 50 sec
2 clampings per workpiece 1 clamping per workpiece
2 handling time for workpiece change Interruption and completion
20 workpieces per tower side 28 workpieces per tower side
4 tower sides, 600 mm 4 tower sides, 600 mm
Result
80 workpieces per tower 112 workpieces per tower
Unmanned processing time 1.2 h Unmanned processing time 3.3 h
2.8-fold operating time!
Facts up to now with swissClamp
Hourly rate for machine CHF 100
Personnel costs per h CHF 50
Qty. of workpieces produced per tower 40 112
Lot size 1,000 1,000
Required workpieces per year 4,000 4,000
Number of workpiece changes per lot and tower
50x (2 clampings)
9x (only 1 clamping)
Workpiece change time per tower 0.25 h 0.1 h
Handmade outside machine per tower – 0.9 h (click&finish)
Result
Workpiece change, costs per year CHF 5,000 CHF 1,980 –60%
Investment CHF 20,000 CHF 12,000 –40%
Investment per clamping position CHF 1,000 CHF 500 –50%
GRIP clamping, direct mounting on machine table
Ordner no. Scope of delivery
MO
NO Complete module GRIP SWC.200-G 1 clamping module, 1 fixed jaw, 3 clamping
jaws, per 2 distance plates 1/2/5/10 mm and 1x 60 mm, 1 spacer for clamping depth 3mm, incl. mounting material Complete module FINISH SWC.200-F
DUO Complete module GRIP SWC.200-Gduo 2 complete modules SWC.200-G, 2 distance bars
Complete module FINISH SWC.200-Fduo 2 complete modules SWC.200-F, 2 distance bars
Indi
vidu
al p
arts
Clamping module SWC.Mod Clamping module
Fixed jaw set GRIP SWC.Fb-GFixed jaw with 6 clamping screws
Fixed jaw set FINISH SWC.Fb-F
Clamping jaw set GRIP SWC.Sb-G3 clamping jaws incl. mounting material
Clamping jaw set FINISH SWC.Sb-F
Distance plate set SWC.Dp-Kit per 2 pcs. 1/2/5/10 mm and 1x 60 mm
Spacer set SWC.Zp-03 Clamping depth 3mm, incl. mounting material
Distance bar set DUO SWC.Ds 4 pcs. with screws
Positioning screw set FINISH SWC.Pas 10 pcs.
Clamping system swissClamp Clamping cube to rotoFIX
Clamping tower
Ordner no. Dimension
Compact 510 SWC.510-Sk2 100x200
Compact 520 SWC.520-Sk2 100x200
Long 510 SWC.510-Sk6 100x600
Long 520 SWC.520-Sk6 100x600
Long XL 520 SWC.510-Sk8 100x800
Adapter 510 SWC.510-Ada
Adapter 520 SWC.520-Ada
Ordner no. Dimension
Four SWC.St4 250x800
Eight SWC.St8 250x800
8
Subject to change / Printed in Switzerland / Edition: 09/2015
More information (address, telephone number...) at www.lehmann-rotary-tables.com
Headquarters Country representatives vacant
Headquarters
PETER LEHMANN AGCH-3552 BäraucTelephone +41 (0)34 409 66 66 Fax +41 (0)34 409 66 00 [email protected] www.lehmann-rotary-tables.com
Representatives / Agencies
Europe– Benelux– Germany– Finland– France – Italy– Norway– Austria– Portugal– Russia– Sweden– Slovenia – Spain– Turkey– Czech Republic (vacant)– UK
Asia– China – India– Japan– Malaysia (vacant)– South Korea– Taiwan
Africa– South Africa
America – Brazil– Canada – USA